summaryrefslogtreecommitdiffstats
path: root/drivers/media/video/ivtv
Commit message (Collapse)AuthorAgeFilesLines
* [media] ivtv: Fix radio supportIan Armstrong2011-11-031-0/+2
| | | | | | | | Although the ivtv driver reports radio support through the V4L2 API, it fails to actually enable it. This patch fixes that. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] ivtv: fill in service_setHans Verkuil2011-09-061-5/+10
| | | | | | | | The service_set field of struct v4l2_sliced_vbi_cap was never filled in. The v4l2-compliance tool complained about this, so this is now fixed. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] drivers/media: do not use EXTRA_CFLAGSArnaud Lacombe2011-09-031-4/+4
| | | | | | | | | | | | | | | | | | | | | | | Usage of these flags has been deprecated for nearly 4 years by: commit f77bf01425b11947eeb3b5b54685212c302741b8 Author: Sam Ravnborg <sam@neptun.(none)> Date: Mon Oct 15 22:25:06 2007 +0200 kbuild: introduce ccflags-y, asflags-y and ldflags-y Moreover, these flags (at least EXTRA_CFLAGS) have been documented for command line use. By default, gmake(1) do not override command line setting, so this is likely to result in build failure or unexpected behavior. Replace their usage by Kbuild's `{as,cc,ld}flags-y'. Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: linux-media@vger.kernel.org Signed-off-by: Arnaud Lacombe <lacombar@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] v4l2-event/ctrls/fh: allocate events per fh and per type instead of ↵Hans Verkuil2011-07-272-7/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | just per-fh The driver had to decide how many events to allocate when the v4l2_fh struct was created. It was possible to add more events afterwards, but there was no way to ensure that you wouldn't miss important events if the event queue would fill up for that filehandle. In addition, once there were no more free events, any new events were simply dropped on the floor. For the control event in particular this made life very difficult since control status/value changes could just be missed if the number of allocated events and the speed at which the application read events was too low to keep up with the number of generated events. The application would have no idea what the latest state was for a control since it could have missed the latest control change. So this patch makes some major changes in how events are allocated. Instead of allocating events per-filehandle they are now allocated when subscribing an event. So for that particular event type N events (determined by the driver) are allocated. Those events are reserved for that particular event type. This ensures that you will not miss events for a particular type altogether. In addition, if there are N events in use and a new event is raised, then the oldest event is dropped and the new one is added. So the latest event is always available. This can be further improved by adding the ability to merge the state of two events together, ensuring that no data is lost at all. This will be added in the next patch. This also makes it possible to allow the user to determine the number of events that will be allocated. This is not implemented at the moment, but would be trivial. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] v4l2-events/fh: merge v4l2_events into v4l2_fhHans Verkuil2011-07-271-3/+3
| | | | | | | | | | | | | Drivers that supported events used to be rare, but now that controls can also raise events this will become much more common since almost all drivers have controls. This means that keeping struct v4l2_events as a separate struct make no more sense. Merging it into struct v4l2_fh simplifies things substantially as it is now an integral part of the filehandle struct. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] ivtv: add control event supportHans Verkuil2011-07-272-3/+10
| | | | | Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] ivtv,cx18: Use default version control for VIDIOC_QUERYCAPMauro Carvalho Chehab2011-07-273-8/+1
| | | | | | | | | After discussing with Andy Walls on irc, we've agreed that this is the best thing to do. No regressions will be introduced, as 3.x.y is greater then the current versions for cx18 and ivtv. Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] cx18/ivtv: fix g_tuner supportHans Verkuil2011-07-071-6/+2
| | | | | | | | The driver shouldn't override vt->type, and the tuner name should be based on vt->type as well. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] ivtv: Internally separate encoder & decoder standard settingIan Armstrong2011-06-016-82/+99
| | | | | | | | | | | | Internally separates the setting of the broadcast standard for the encoder & decoder. Externally there's no change in functionality. [awalls@md.metrocast.net: Edited to fix a checkpatch gripe about multiple assignment and to remove a now unused DEFINE_WAIT() due to this patch] Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] ivtvfb: Add sanity check to ivtvfb_pan_display()Ian Armstrong2011-06-011-0/+4
| | | | | | | | | Add sanity check to ivtvfb_pan_display() to ensure only valid values are used to pan the display. Invalid values are rejected with -EINVAL Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] ivtvfb: use display information in info not in var for panningLaurent Pinchart2011-06-011-1/+2
| | | | | | | | | | | We must not use any information in the passed var besides xoffset, yoffset and vmode as otherwise applications might abuse it. Also use the aligned fix.line_length and not the (possible) unaligned xres_virtual. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] ivtv: Make two ivtv_msleep_timeout calls uninterruptableIan Armstrong2011-06-011-2/+2
| | | | | | | | | | | | Two ivtv_msleep_timeout() calls are incorrectly flagged as interruptable. The first is in the init sequence for a capture and is required for stable hardware setup. The second is at the end of the capture and used to handle the last data transfer. Failure to wait for this last transfer can result in stale data being read at the start of the next capture. Signed-off-by: Ian Armstrong <ian@iarmst.demon.co.uk> Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] use pci_dev->revisionBjørn Mork2011-05-201-3/+1
| | | | | | | | | pci_setup_device() has saved the PCI revision in the pci_dev struct since Linux 2.6.23. Use it. Cc: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* Fix common misspellingsLucas De Marchi2011-03-312-3/+3
| | | | | | Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
* [media] rc/keymaps: Remove the obsolete rc-rc5-tv keymapMauro Carvalho Chehab2011-03-221-2/+1
| | | | | | | | | | | | | | | | | | | | This keymap were used for the Hauppauge Black remote controller only. It also contains some keycodes not found there. As the Hauppauge Black is now part of the hauppauge keymap, just remove it. Also, remove the modprobe hacks to select between the Gray and the Black versions of the remote controller as: - Both are supported by default by the keymap; - If the user just wants one keyboard supported, it is just a matter of changing the keymap via the userspace tool (ir-keytable), removing the keys that he doesn't desire. As ir-keytable auto-loads the keys via udev, this is better than obscure modprobe parameters. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Jarod Wilson <jarod@redhat.com>
* [media] remove the old RC_MAP_HAUPPAUGE_NEW RC mapMauro Carvalho Chehab2011-03-221-1/+1
| | | | | | | | | | | | | | | | | The rc-hauppauge-new map is a messy thing, as it bundles 3 different remote controllers as if they were just one, discarding the address byte. Also, some key maps are wrong. With the conversion to the new rc-core, it is likely that most of the devices won't be working properly, as the i2c driver and the raw decoders are now providing 16 bits for the remote, instead of just 8. delete mode 100644 drivers/media/rc/keymaps/rc-hauppauge-new.c Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Jarod Wilson <jarod@redhat.com>
* [media] v4l2: use new flag to enable core priority handlingHans Verkuil2011-03-221-0/+1
| | | | | | | | | | | Rather than guess which driver supports core priority handling, require drivers that do to explicitly set the V4L2_FL_USE_FH_PRIO flag in video_device. Updated the core prio handling accordingly and set the flag in the three drivers that do. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] ivtv: replace ugly casts with a proper container_ofHans Verkuil2011-03-221-50/+50
| | | | | | | | | | | | ivtv-ioctl cast the 'void *fh' directly to 'ivtv_open_id *'. This should be done properly with a contained_of since the 'void *fh' is really a 'struct v4l2_fh *'. It worked because the v4l2_fh field is also the first field in the ivtv_open_id struct, but it is not clean code. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] ivtv: add missing v4l2_fh_exitHans Verkuil2011-03-221-0/+1
| | | | | Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] ivtv: convert to core priority handlingHans Verkuil2011-03-223-45/+15
| | | | | Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] v4l2-ioctl: add priority handling supportHans Verkuil2011-03-221-1/+2
| | | | | | | Drivers that use v4l2_fh can now use the core framework support of g/s_priority. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] ivtv: yuv: handle get_user_pages() -errno returnsPaul Cassella2011-03-211-12/+40
| | | | | | | | | | | | | | | | | | | | | get_user_pages() may return -errno, such as -EFAULT. So don't blindly use its return value as an offset into dma->map[] for the next get_user_pages() call. Since we'll give up and return an error if either fails, don't even make the second call if the first failed to give us exactly what we were looking for. The old code would also call put_page() on as many elements of dma->map[] as we'd asked for, regardless of how many were valid. [Andy Walls modified this patch to return -EFAULT instead of -EINVAL as Paul's observation "I'm not sure -EINVAL is the best return code vs -EFAULT or -ENOMEM, [...]" was correct. The return value bubbles up as a return code for write(), for which the V4L2 API spec indicates EINVAL is incorrect and EFAULT is correct.] Signed-off-by: Paul Cassella <fortytwo-ivtv@maneteren.bigw.org> Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] ivtv: Fix sparse warning regarding a user pointer in ↵Andy Walls2011-03-211-1/+1
| | | | | | | | | | | ivtv_write_vbi_from_user() Fix the first, botched attempt at preventing direct use of a user pointer in ivtv_write_vbi(). Reported-by: Dr. David Alan Gilbert <linux@treblig.org> Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] ivtv: udma: handle get_user_pages() returning fewer pages than we ↵Paul Cassella2011-03-211-1/+6
| | | | | | | | | | | | | | | asked for get_user_pages() may return fewer page than we ask for. As we give up and return an error in this case, we need to put_page() each of the pages we did get. [Andy Walls modified the patch, only removing the braces in the 'for' statement, to eliminate a checkpatch warning.] Signed-off-by: Paul Cassella <fortytwo-ivtv@manetheren.bigw.org> Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] ivtv: Fix corrective action taken upon DMA ERR interrupt to avoid hangMichael2011-03-021-7/+51
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After upgrading the kernel from stock Ubuntu 7.10 to 10.04, with no hardware changes, I started getting the dreaded DMA TIMEOUT errors, followed by inability to encode until the machine was rebooted. I came across a post from Andy in March (http://www.gossamer-threads.com/lists/ivtv/users/40943#40943) where he speculates that perhaps the corrective actions being taken after a DMA ERROR are not sufficient to recover the situation. After some testing I suspect that this is indeed the case, and that in fact the corrective action may be what hangs the card's DMA engine, rather than the original error. Specifically these DMA ERROR IRQs seem to present with two different values in the IVTV_REG_DMASTATUS register: 0x11 and 0x13. The current corrective action is to clear that status register back to 0x01 or 0x03, and then issue the next DMA request. In the case of a 0x13 this seems to result in a minor glitch in the encoded stream due to the failed transfer that was not retried, but otherwise things continue OK. In the case of a 0x11 the card's DMA write engine is never heard from again, and a DMA TIMEOUT follows shortly after. 0x11 is the killer. I suspect that the two cases need to be handled differently. The difference is in bit 1 (0x02), which is set when the error is about to be successfully recovered, and clear when things are about to go bad. Bit 1 of DMASTATUS is described differently in different places either as a positive "write finished", or an inverted "write busy". If we take the first definition, then when an error arises with state 0x11, it means that the write did not complete. It makes sense to start a new transfer, as in the current code. But if we take the second definition, then 0x11 means "an error but the write engine is still busy". Trying to feed it a new transfer in this situation might not be a good idea. As an experiment, I added code to ignore the DMA ERROR IRQ if DMASTATUS is 0x11. I.e., don't start a new transfer, don't clear our flags, etc. The hope was that the card would complete the transfer and issue a ENC DMA COMPLETE, either successfully or with an error condition there. However the card still hung. The only remaining corrective action being taken with a 0x11 status was then the write back to the status register to clear the error, i.e. DMASTATUS = DMASTATUS & ~3. This would have the effect of clearing the error bit 4, while leaving the lower bits indicating DMA write busy. Strangely enough, removing this write to the status register solved the problem! If the DMA ERROR IRQ with DMASTATUS=0x11 is completely ignored, with no corrective action at all, then the card will complete the transfer and issue a new IRQ. If the status register is written to when it has the value 0x11, then the DMA engine hangs. Perhaps it's illegal to write to DMASTATUS while the read or write busy bit is set? At any rate, it appears that the current corrective action is indeed making things worse rather than better. I put together a patch that modifies ivtv_irq_dma_err to do the following: - Don't write back to IVTV_REG_DMASTATUS. - If write-busy is asserted, leave the card alone. Just extend the timeout slightly. - If write-busy is de-asserted, retry the current transfer. This has completely fixed my DMA TIMEOUT woes. DMA ERR events still occur, but now they seem to be correctly handled. 0x11 events no longer hang the card, and 0x13 events no longer result in a glitch in the stream, as the failed transfer is retried. I'm happy. I've inlined the patch below in case it is of interest. As described above, I have a theory about why it works (based on a different interpretation of bit 1 of DMASTATUS), but I can't guarantee that my theory is correct. There may be another explanation, or it may be a fluke. Maybe ignoring that IRQ entirely would be equally effective? Maybe the status register read/writeback sequence is race condition if the card changes it in the mean time? Also as I am using a PVR-150 only, I have not been able to test it on other cards, which may be especially relevant for 350s that support concurrent decoding. Hopefully the patch does not break the DMA READ path. Mike [awalls@md.metrocast.net: Modified patch to add a verbose comment, make minor brace reformats, and clear the error flags in the IVTV_REG_DMASTATUS iff both read and write DMA were not in progress. Mike's conjecture about a race condition with the writeback is correct; it can confuse the DMA engine.] [Comment and analysis from the ML post by Michael <mike@rsy.com>] Signed-off-by: Andy Walls <awalls@md.metrocast.net> Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] v4l2-subdev: remove core.s_config and v4l2_i2c_new_subdev_cfg()Hans Verkuil2011-01-191-2/+7
| | | | | | | | | | | | | | | | The core.s_config op was meant for legacy drivers that needed to work with old pre-2.6.26 kernels. This is no longer relevant. Unfortunately, this op was incorrectly called from several drivers. Replace those occurences with proper i2c_board_info structs and call v4l2_i2c_new_subdev_board. After these changes v4l2_i2c_new_subdev_cfg() was no longer used, so remove that function as well. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] ivtv-i2c: Fix two warningsMauro Carvalho Chehab2010-12-301-2/+2
| | | | | | | | | | | | | | Fix two gcc warnings: drivers/media/video/ivtv/ivtv-i2c.c:170: warning: cast from pointer to integer of different size drivers/media/video/ivtv/ivtv-i2c.c:171: warning: cast from pointer to integer of different size $ gcc --version gcc (GCC) 4.1.2 20080704 (Red Hat 4.1.2-48) They seem bogus, but, as the original code also has problems with LE/BE, just change its implementation to be clear. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] ivtv-i2c: Don't use IR legacy mode for Zilog IRMauro Carvalho Chehab2010-12-301-1/+0
| | | | | | | | The Zilog IR entries are already handled by IR new code. So, remove its usage from the legacy IR support. Acked-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] ivtv: Add Adaptec Remote ControllerMauro Carvalho Chehab2010-12-303-3/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | lirc-i2c implements a get key logic for the Adaptec Remote Controller, at address 0x6b. The only driver that seems to have an Adaptec device is ivtv: $ git grep -i adaptec drivers/media drivers/media/video/cs53l32a.c: * cs53l32a (Adaptec AVC-2010 and AVC-2410) i2c ivtv driver. drivers/media/video/cs53l32a.c: * Audio source switching for Adaptec AVC-2410 added by Trev Jackson drivers/media/video/cs53l32a.c: /* Set cs53l32a internal register for Adaptec 2010/2410 setup */ drivers/media/video/ivtv/ivtv-cards.c:/* Adaptec VideOh! AVC-2410 card */ drivers/media/video/ivtv/ivtv-cards.c: { PCI_DEVICE_ID_IVTV16, IVTV_PCI_ID_ADAPTEC, 0x0093 }, drivers/media/video/ivtv/ivtv-cards.c: .name = "Adaptec VideOh! AVC-2410", drivers/media/video/ivtv/ivtv-cards.c:/* Adaptec VideOh! AVC-2010 card */ drivers/media/video/ivtv/ivtv-cards.c: { PCI_DEVICE_ID_IVTV16, IVTV_PCI_ID_ADAPTEC, 0x0092 }, drivers/media/video/ivtv/ivtv-cards.c: .name = "Adaptec VideOh! AVC-2010", drivers/media/video/ivtv/ivtv-cards.h:#define IVTV_CARD_AVC2410 7 /* Adaptec AVC-2410 */ drivers/media/video/ivtv/ivtv-cards.h:#define IVTV_CARD_AVC2010 8 /* Adaptec AVD-2010 (No Tuner) */ drivers/media/video/ivtv/ivtv-cards.h:#define IVTV_PCI_ID_ADAPTEC 0x9005 drivers/media/video/ivtv/ivtv-driver.c: "\t\t\t 8 = Adaptec AVC-2410\n" drivers/media/video/ivtv/ivtv-driver.c: "\t\t\t 9 = Adaptec AVC-2010\n" drivers/media/video/ivtv/ivtv-i2c.c: 0x6b, /* Adaptec IR */ There are two Adaptec cards defined there, but AVC-2010 doesn't have a remote controller. So, the logic at lirc_i2c seems to be for Adaptec AVC-2410. As we'll remove lirc_i2c from kernel, move the getkey code to ivtv driver, and use it for AVC-2410. Reviewed-by: Andy Walls <awalls@md.metrocast.net> Acked-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] v4l: fix handling of v4l2_input.capabilitiesHans Verkuil2010-12-301-2/+0
| | | | | | | | | | | | | | The v4l core sets the v4l2_input.capabilities field based on the supplied v4l2_ioctl_ops. However, several drivers do a memset or memcpy of the v4l2_input struct, thus overwriting that field incorrectly. Either remove the memset (which is already done by the v4l core), or add the proper capabilities field in case of a memcpy. The same is also true for v4l2_output, but that only affected the ivtv driver. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] ivtv: Return EFAULT when copy_from_user() fails in ↵Andy Walls2010-12-293-9/+15
| | | | | | | | | | | ivtv_write_vbi_from_user() If write() on a VBI device node fails due to a bad buffer pointer from userspace, we should notify the application properly with EFAULT, per the V4L2 API spec. Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] ivtv: ivtv_write_vbi() should use copy_from_user() for user data buffersAndy Walls2010-12-293-38/+78
| | | | | | | | | | | | | | | | | ivtv_write_vbi() is used for both VBI data that came from the driver internally and VBI data that came from the user. However, it did not use copy_from_user() for reading the VBI data from the user buffers. This change adds a new version of the function, ivtv_write_vbi_from_user(), that uses copy_from_user() to read the VBI data provided via user buffers. This should resolve a sparse build warning reported by Dave Gilbert. Reported-by: Dr. David Alan Gilbert <linux at treblig.org> Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] ivtv, cx18: Make ioremap failure messages more useful for usersAndy Walls2010-12-291-6/+22
| | | | | | | | | | The error messages these drivers emitted for ioremap() failures were misleading and not helpful for users. Reworded those messages to help the user take action to resolve vmalloc address space exhaustion. Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] rc: Rename remote controller type to rc_type instead of ir_typeMauro Carvalho Chehab2010-12-291-3/+3
| | | | | | | for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,IR_TYPE,RC_TYPE,g <$i >a && mv a $i; done for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,ir_type,rc_type,g <$i >a && mv a $i; done Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] rc: rename the remaining things to rc_coreMauro Carvalho Chehab2010-12-291-1/+1
| | | | | | | | | | | | | | | The Remote Controller subsystem is meant to be used not only by Infra Red but also for similar types of Remote Controllers. The core is not specific to Infra Red. As such, rename: - ir-core.h to rc-core.h - IR_CORE to RC_CORE - namespace inside rc-core.c/rc-core.h To be consistent with the other changes. No functional change on this patch. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] ir-core: more cleanups of ir-functions.cDavid Härdeman2010-12-291-2/+1
| | | | | | | | | | | | | | | | | | | | cx88 only depends on VIDEO_IR because it needs ir_extract_bits(). Move that function to ir-core.h and make it inline. Lots of drivers had dependencies on VIDEO_IR when they really wanted IR_CORE. The only remaining drivers to depend on VIDEO_IR are bt8xx and saa7134 (ir_rc5_timer_end is the only function exported by ir-functions). Rename VIDEO_IR -> IR_LEGACY to give a hint to anyone writing or converting drivers to IR_CORE that they do not want a dependency on IR_LEGACY. Signed-off-by: David Härdeman <david@hardeman.nu> Acked-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] v4l: Remove module_name argument to the v4l2_i2c_new_subdev* functionsLaurent Pinchart2010-11-221-13/+9
| | | | | | | The argument isn't used anymore by the functions, remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* Merge branch 'v4l_for_linus' of ↵Linus Torvalds2010-10-283-38/+19
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (505 commits) [media] af9015: Fix max I2C message size when used with tda18271 [media] IR: initialize ir_raw_event in few more drivers [media] Guard a divide in v4l1 compat layer [media] imon: fix nomouse modprobe option [media] imon: remove redundant change_protocol call [media] imon: fix my egregious brown paper bag w/rdev/idev split [media] cafe_ccic: Configure ov7670 correctly [media] ov7670: allow configuration of image size, clock speed, and I/O method [media] af9015: support for DigitalNow TinyTwin v3 [1f4d:9016] [media] af9015: map DigitalNow TinyTwin v2 remote [media] DigitalNow TinyTwin remote controller [media] af9015: RC fixes and improvements videodev2.h.xml: Update to reflect the latest changes at videodev2.h [media] v4l: document new Bayer and monochrome pixel formats [media] DocBook/v4l: Add missing formats used on gspca cpia1 and sn9c2028 [media] firedtv: add parameter to fake ca_system_ids in CA_INFO [media] tm6000: fix a macro coding style issue tm6000: Remove some ugly debug code [media] Nova-S-Plus audio line input [media] [RFC,1/1] V4L2: Use new CAP bits in existing RDS capable drivers ...
| * [media] ivtv: Don't use module names to load I2C modulesLaurent Pinchart2010-10-221-34/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With the v4l2_i2c_new_subdev* functions now supporting loading modules based on modaliases, replace the hardcoded module name passed to those functions by NULL. The sub-devices without a listed module name don't result in and I2C sub-device being created, as they either are IR devices or don't have an I2C address listed. It's thus safe to rely on modaliases only. All corresponding I2C modules have been checked, and all of them include a module aliases table with names corresponding to what the ivtv driver uses. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * V4L/DVB: v4l: remove unused i2c-id.h headersHans Verkuil2010-10-211-1/+0
| | | | | | | | | | Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * V4L/DVB: V4L2: avoid name conflicts in macrosGuennadi Liakhovetski2010-10-211-3/+11
| | | | | | | | | | | | | | | | | | | | "sd" and "err" are too common names to be used in macros for local variables. Prefix them with an underscore to avoid name clashing. [mchehab@redhat.com: whitespace cleanups] Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Reviewed-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* | Merge branch 'for-next' of ↵Linus Torvalds2010-10-241-1/+1
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) Update broken web addresses in arch directory. Update broken web addresses in the kernel. Revert "drivers/usb: Remove unnecessary return's from void functions" for musb gadget Revert "Fix typo: configuation => configuration" partially ida: document IDA_BITMAP_LONGS calculation ext2: fix a typo on comment in ext2/inode.c drivers/scsi: Remove unnecessary casts of private_data drivers/s390: Remove unnecessary casts of private_data net/sunrpc/rpc_pipe.c: Remove unnecessary casts of private_data drivers/infiniband: Remove unnecessary casts of private_data drivers/gpu/drm: Remove unnecessary casts of private_data kernel/pm_qos_params.c: Remove unnecessary casts of private_data fs/ecryptfs: Remove unnecessary casts of private_data fs/seq_file.c: Remove unnecessary casts of private_data arm: uengine.c: remove C99 comments arm: scoop.c: remove C99 comments Fix typo configue => configure in comments Fix typo: configuation => configuration Fix typo interrest[ing|ed] => interest[ing|ed] Fix various typos of valid in comments ... Fix up trivial conflicts in: drivers/char/ipmi/ipmi_si_intf.c drivers/usb/gadget/rndis.c net/irda/irnet/irnet_ppp.c
| * Update broken web addresses in the kernel.Justin P. Mattock2010-10-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch below updates broken web addresses in the kernel Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Finn Thain <fthain@telegraphics.com.au> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Matt Turner <mattst88@gmail.com> Cc: Dimitry Torokhov <dmitry.torokhov@gmail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Acked-by: Ben Pfaff <blp@cs.stanford.edu> Acked-by: Hans J. Koch <hjk@linutronix.de> Reviewed-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | V4L/DVB: ivtvfb: prevent reading uninitialized stack memoryDan Rosenberg2010-09-271-0/+2
| | | | | | | | | | | | | | | | | | | | | | The FBIOGET_VBLANK device ioctl allows unprivileged users to read 16 bytes of uninitialized stack memory, because the "reserved" member of the fb_vblank struct declared on the stack is not altered or zeroed before being copied back to the user. This patch takes care of it. Signed-off-by: Dan Rosenberg <dan.j.rosenberg@gmail.com> Signed-off-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* | Merge branch 'v4l_for_linus' of ↵Linus Torvalds2010-08-131-1/+1
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: V4L/DVB: v4l2-ctrls.c: needs to include slab.h V4L/DVB: fix Kconfig to depends on VIDEO_IR V4L/DVB: Fix IR_CORE dependencies
| * | V4L/DVB: fix Kconfig to depends on VIDEO_IRMauro Carvalho Chehab2010-08-121-1/+1
| |/ | | | | | | | | | | | | warning: (VIDEO_BT848 && MEDIA_SUPPORT && VIDEO_CAPTURE_DRIVERS && VIDEO_DEV && PCI && I2C && VIDEO_V4L2 && INPUT || VIDEO_SAA7134 && MEDIA_SUPPORT && VIDEO_CAPTURE_DRIVERS && VIDEO_V4L2 && VIDEO_DEV && PCI && I2C && INPUT || VIDEO_CX88 && MEDIA_SUPPORT && VIDEO_CAPTURE_DRIVERS && VIDEO_V4L2 && VIDEO_DEV && PCI && I2C && INPUT || VIDEO_IVTV && MEDIA_SUPPORT && VIDEO_CAPTURE_DRIVERS && VIDEO_V4L2 && PCI && I2C && INPUT || VIDEO_CX18 && MEDIA_SUPPORT && VIDEO_CAPTURE_DRIVERS && VIDEO_V4L2 && DVB_CORE && PCI && I2C && EXPERIMENTAL && INPUT || VIDEO_EM28XX && MEDIA_SUPPORT && VIDEO_CAPTURE_DRIVERS && VIDEO_V4L2 && V4L_USB_DRIVERS && USB && VIDEO_DEV && I2C && INPUT || VIDEO_TLG2300 && MEDIA_SUPPORT && VIDEO_CAPTURE_DRIVERS && VIDEO_V4L2 && V4L_USB_DRIVERS && USB && VIDEO_DEV && I2C && INPUT && SND && DVB_CORE || VIDEO_CX231XX && MEDIA_SUPPORT && VIDEO_CAPTURE_DRIVERS && VIDEO_V4L2 && V4L_USB_DRIVERS && USB && VIDEO_DEV && I2C && INPUT || DVB_BUDGET_CI && MEDIA_SUPPORT && DVB_CAPTURE_DRIVERS && DVB_CORE && DVB_BUDGET_CORE && I2C && INPUT || DVB_DM1105 && MEDIA_SUPPORT && DVB_CAPTURE_DRIVERS && DVB_CORE && PCI && I2C && INPUT || VIDEO_GO7007 && STAGING && !STAGING_EXCLUDE_BUILD && VIDEO_DEV && PCI && I2C && INPUT && SND || VIDEO_CX25821 && STAGING && !STAGING_EXCLUDE_BUILD && DVB_CORE && VIDEO_DEV && PCI && I2C && INPUT) selects VIDEO_IR which has unmet direct dependencies (IR_CORE) Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* | i2c: Add support for custom probe functionJean Delvare2010-08-111-4/+5
|/ | | | | | | | | The probe method used by i2c_new_probed_device() may not be suitable for all cases. Let the caller provide its own, optional probe function. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: ivtv: convert to the new control frameworkHans Verkuil2010-08-088-301/+88
| | | | | Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: ivtv: convert gpio subdev to new control frameworkHans Verkuil2010-08-083-41/+38
| | | | | Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: cx25840/ivtv: replace ugly priv control with s_configHans Verkuil2010-08-082-8/+8
| | | | | | | | | | | | The cx25840 used a private control CX25840_CID_ENABLE_PVR150_WORKAROUND to be told whether to enable a workaround for certain pvr150 cards. This is really config data that it needs to get at load time. Implemented this in cx25840 and ivtv. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
OpenPOWER on IntegriCloud