summaryrefslogtreecommitdiffstats
path: root/drivers/media/video/au0828/au0828.h
Commit message (Collapse)AuthorAgeFilesLines
* [media] rename most media/video usb drivers to media/usbMauro Carvalho Chehab2012-08-151-304/+0
| | | | | | | | Rename all USB drivers with their own directory under drivers/media/video into drivers/media/usb and update the building system. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] au0828: make sure video standard is setup in tuner-coreDevin Heitmueller2012-08-091-0/+1
| | | | | | | | | | | | | | | | | | | If the user performs a tuning attempt without explicitly calling the s_std ioctl(), a value of zero is sent from tuner-core to xc5000. This causes the xc5000 driver to leave the standard unchanged. The problem was masked by the fact that the xc5000 driver defaulted to NTSC, but if you happened to perform an ATSC/ClearQAM tuning attempt and then do an analog tune, the net effect is an analog tune with the standard still set to DTV6. Keep track of whether the standard has ever been sent to tuner-core. We don't make an s_std subdev call explicitly during probe because that will cause a firmware load (which is very time consuming on the 950q). With the logic in this patch, the s_std call will occur automatically on the s_freq call if it hasn't already been set. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] au8522: properly recover from the au8522 delivering misaligned TS ↵Devin Heitmueller2012-08-091-0/+1
| | | | | | | | | | | | | | | | | | | | | | streams There is an apparent bug in the au8522 TS clocking which can result in it delivering a TS payload to the au0828 that is shifted by some number of bits. For example, the device will announce a packet containing "FA 38 FF F8" which if you shift left one bit is "1F 47 1F FF F0..." This presents itself as no TS stream being delivered from the kernel to userland, since the kernel demux will drop every packet. In the event that this condition occurs, restart the DVB stream. Also, this patch includes a couple of lines of cleanup to not change the FIFO configuration while the FIFO is running (which can screw up the state machine), and dequeue the buffers before turning off the FIFO. This puts the logic in sync with the Windows driver. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] au0828: fixes for timeout on no videoDevin Heitmueller2010-12-291-0/+2
| | | | | | | | | The first pass of fixes to cause the driver to continue streaming even when there is no video arriving over the ITU656 bus were not adequate. Continue the work from the previous patch. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] au0828: continue video streaming even when no ITU-656 coming inDevin Heitmueller2010-12-291-0/+2
| | | | | | | | | | | | | We need the au0828 to continue delivering frames even when the device is not delivering video, or else applications such as tvtime will block indefinitely. Unfortunately, the au8522 doesn't have any sort of free-running mode or "blue screen on no video" like some other decoders. This work was sponsored by GetWellNetwork Inc. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] au0828: set max packets per URB to match Windows driverDevin Heitmueller2010-12-291-1/+1
| | | | | | | | | | | We had the max packets per URB set to an incredibly low "10" as opposed to the Windows driver which has it as 128. Set the value to match the Windows driver, which will reduce interrupts considerably. This work was sponsored by GetWellNetwork Inc. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB: Add closed captioning support for the HVR-950qDevin Heitmueller2010-08-021-3/+17
| | | | | | | | | | | | Add NTSC closed captioning support for au0828 based products. Note that this also required reworking the locking to support streaming on both the video and VBI devices (the logic for which I copied from my changes made to the em28xx several months ago). This work was sponsored by GetWellNetwork Inc. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (13554a): v4l: Use the video_drvdata function in driversLaurent Pinchart2009-12-161-1/+0
| | | | | | | | | | | | | | | Fix all device drivers to use the video_drvdata function instead of maintaining a local list of minor to private data mappings. Call video_set_drvdata to register the driver private pointer when not already done. Where applicable, the local list of mappings is completely removed when it becomes unused. [mchehab.redhat.com: removed tm6000 changes as tm6000 is not ready yet for submission even on staging] Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11343): au0828: make i2c clock speed per-board configurableDevin Heitmueller2009-04-061-0/+1
| | | | | | | | | | | Setup the i2c clock speed to be definable on a per-board basis. This allows us to explicitly set the clock speed to 30 KHz on the 950q, and also gets rid of code which sets it on a basis of what chip the i2c master is talking to at any given time (which could have caused issues because i2c slaves should never receive commands at a clock higher than their supported clock speed). Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11088): au0828: finish videodev/subdev conversionDevin Heitmueller2009-03-301-2/+0
| | | | | | | | | | | | Per Hans Verkuil <hverkuil@xs4all.nl> instruction, remove the deprecated attach_inform/detach_inform routines, and convert over the i2c calls to subdev calls. Thanks to Hans Verkuil <hverkuil@xs4all.nl> for providing feedback on the au0828 analog support. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11085): au0828/au8522: Codingstyle fixesDevin Heitmueller2009-03-301-6/+0
| | | | | | | | Take a pass over all of the au0828/au8522 files and cleanup all the codingstyle issues. This patch does not make *any* functional change to the code. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11080): au0828: Convert to use v4l2_device/subdev frameworkDevin Heitmueller2009-03-301-1/+3
| | | | | | | | Convert over to using the new subdev framework for the au0828 bridge. This includes using the new i2c probing mechanism. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11078): au0828: properly handle non-existent analog inputsDevin Heitmueller2009-03-301-1/+2
| | | | | | | | | | | | | | It is not valid to look for dev->board.input == NULL to detect an undefined analog configuration section, since it is a member of the struct and not a pointer (hence it will *always* be non-NULL). Do the check based on whether the first input is actually a valid input type instead. Thanks to Michael Krufky <mkrufky@linuxtv.org> for providing sample hardware of various configurations to test with. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11077): au0828: properly handle missing analog USB endpointDevin Heitmueller2009-03-301-1/+2
| | | | | | | | | | | | | | Move the setup of the analog isoc handler into au0828-video.c, so it does not occur if there is not an .input section defined for the board. Also fixes a case where if there is an input section but the board does not actually have analog support, the digital support will continue to work as expected. Thanks to Michael Krufky <mkrufky@linuxtv.org> for providing sample hardware of various configurations to test with. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11070): au0828: Rework the way the analog video binding occursDevin Heitmueller2009-03-301-2/+5
| | | | | | | | | | | | | | | Rework the way boards are managed so that we can change the board description based on the Hauppauge eeprom (modeled after cx88-cards.c). Also, make sure that we don't load the analog stack if there are no analog inputs defined in the board profile. Thanks to Michael Krufky <mkrufky@linuxtv.org> for providing information on the various ways different Hauppauge boards can be configured. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11066): au0828: add support for analog functionality in bridgeDevin Heitmueller2009-03-301-7/+167
| | | | | | | | | | | | | Add support for the analog functionality found in the au0828 bridge Thanks to Michael Krufky <mkrufky@linuxtv.org> and Steven Toth <stoth@linuxtv.org> for providing sample hardware, engineering level support, and testing. Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> [mchehab@redhat.com: fix compilation by adding linux/version.h] Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (9049): convert tuner drivers to use dvb_frontend->callbackMichael Krufky2008-10-121-1/+2
| | | | | Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (8805): Steven Toth email address changeSteven Toth2008-09-031-1/+1
| | | | | | | | I need this so I can better isolate my linux email from my corporate email. Signed-off-by: Steven Toth <stoth@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (7750): au0828/ cleanups and fixesAdrian Bunk2008-04-261-6/+2
| | | | | | | | | | | | | | | | This patch contains the following cleanups and fixes: - "debug" is definitely not a good name for a global variable, renamed it to "au0828_debug" this fixes a compile error with some kernel configurations - since the module parameter is int the variable shouldn't be unsigned - remove the {usb,bridge,i2c}_debug module parameters since they are already covered by the "debug" module parameter - remove the unused au0828_bcount - make the needlessly global i2c_scan static - make the needlessly global dvb_register() static Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (7638): CodingStyle fixes for au8522 and au0828Mauro Carvalho Chehab2008-04-241-7/+8
| | | | Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (7634): au0828: CleanupSteven Toth2008-04-241-1/+0
| | | | | | | au0828: Cleanup Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (7625): au0828: CleanupSteven Toth2008-04-241-0/+9
| | | | | Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (7622): HVR950Q Hauppauge eeprom supportSteven Toth2008-04-241-0/+2
| | | | | | | HVR950Q Hauppauge eeprom support. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (7621): Add support for Hauppauge HVR950Q/HVR850/FusioHDTV7-USBSteven Toth2008-04-241-0/+117
Including support for the AU0828 USB Bridge. Including support for the AU8522 ATSC/QAM Demodulator. Including support for the AU8522 ATSC/QAM Demodulator. Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
OpenPOWER on IntegriCloud