summaryrefslogtreecommitdiffstats
path: root/drivers/media/dvb/b2c2
Commit message (Collapse)AuthorAgeFilesLines
* [media] i2c: Stop using I2C_CLASS_TV_DIGITALJean Delvare2010-10-211-3/+0
| | | | | | | | | | Detection class I2C_CLASS_TV_DIGITAL is set by many adapters but no I2C device driver is setting it anymore, which means it can be dropped. I2C devices on digital TV adapters are instantiated explicitly these days, which is much better. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (12294): b2c2: Use dvb-pll for Cablestar2Trent Piepho2009-09-121-54/+19
| | | | | | | | | | | | | | | | | | | The dvb-pll code should do the same thing that alps_tdee4_stv0297_tuner_set_params() was doing. Except the dvb-pll code will check for tuner presence when attaching, while the old code didn't. This tuner appears to not be behind the stv0297's I2C gate but is instead on a different I2C adapter provided by the flexcop chip. The old code would turn the I2C gate off each time the tuner was used. I've changed it to turn the gate off when the tuner is attached and then disable the gate control function. This should result in the gate staying off, which should be even better. [hverkuil@xs4all.nl: fix compile error] Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (12293): b2c2: Use dvb-pll for Skystar2 rev 2.3 and rev 2.6Trent Piepho2009-09-121-74/+31
| | | | | | | | | | The code in skystar23_samsung_tbdu18132_tuner_set_params() and samsung_tbmu24112_tuner_set_params() is equivalent to what the dvb-pll code does. There could be an issue because the dvb-pll code will probe to check for the tuner, while the previous code didn't do any checks. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (12292): b2c2: Use dvb-pll for AirStar DVB-T's tunerTrent Piepho2009-09-121-32/+6
| | | | | | | | The code in samsung_tdtc9251dh0_calc_regs() is equivalent to what dvb-pll's code does. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (12197): Remove unnecessary semicolonsJoe Perches2009-09-121-1/+1
| | | | | | | | | | Cc: Patrick Boettcher <patrick.boettcher@desy.de> Cc: Steven Toth <stoth@linuxtv.org> Cc: Igor M. Liplianin <liplianin@netup.ru> Cc: Srinivasa Deevi <srinivasa.deevi@conexant.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (12291): b2c2: fix frontends compiled into kernelTrent Piepho2009-07-241-30/+37
| | | | | | | | | | | | | | A recent patch didn't take into account that frontends can be compiled into the kernel. Or that frontends compiled as modules can't be used by the b2c2 driver if it is not a module itself. Some frontends require multiple drivers, e.g. a demod driver and a tuner driver. The code for the frontend support was getting added if the demod driver was available. Change this to also require any needed tuner or SEC drivers as well. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11894): flexcop-pci: dmesg visible names brokenMatthias Schwarzott2009-06-161-10/+10
| | | | | | | | | | | | | | | Changeset 1589a993f074124c3edfff03656e910bb472eeaa broke user visible names of flexcop-pci devices, as it did reorder the enum of card types, but did not adjust the array containing the card names. Reorder the names, and uses [FC_AIR_DVBT] = "Air2PC/AirStar 2 DVB-T" assignment style for more clarity. It also adds the revision Number to the name for SkyStar rev. 2.3 and rev 2.6 as I think it is useful to see in log output. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11964): b2c2: Fix problems with frontend attachmentTrent Piepho2009-06-161-83/+113
| | | | | | | | | | | | | | | | | | | | The frontend attachment code didn't handle cases where the frontend partially failed to attach. For instance, when the demod was attached successfully but the tuner driver wasn't compiled or fails to init for some reason. In these cases we try to clean up the partial attachment and fail instead of proceeding with a broken frontend. If frontend registration fails, clean up with dvb_frontend_detach() rather than just calling the frontend's main release method. The former does some additional stuff, like release an attached tuner and take care of putting symbols when dynamic binding is used. In skystar2_rev23_attach() it's not necessary to set fc->dev_type, that gets set before skystar2_rev23_attach() is called. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11829): Rewrote frontend-attach mechanism to gain noise-less ↵Patrick Boettcher2009-06-162-355/+413
| | | | | | | | | | | | | deactivation of submodules This patch is reorganizing the frontend-attach mechanism in order to gain noise-less (superflous prints) deactivation of submodules. Credits go to Uwe Bugla for helping to clean and test the code. Signed-off-by: Uwe Bugla <uwe.bugla@gmx.de> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11828): Reducing print-level of I2C error printsMatthias Schwarzott2009-06-161-1/+1
| | | | | | | | | Reducing the print-levle of I2C error prints cleans some unwanted but unavoidable errors from default syslog-level. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11288): Code cleanup (passes checkpatch now) of the ↵Uwe Bugla2009-03-302-251/+281
| | | | | | | | | | b2c2-flexcop-drivers 2/2 This is the second part of the code cleanup changing the usb and pci-driver cores. Signed-off-by: Uwe Bugla <uwe.bugla@gmx.de> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11287): Code cleanup (passes checkpatch now) of the ↵Uwe Bugla2009-03-3015-394/+353
| | | | | | | | | | | | b2c2-flexcop-drivers 1/2 This patch cleans up the source code of the b2c2 flexcop-driver. It is the first of a total of two. The code is now passing the checkpatch-script. Signed-off-by: Uwe Bugla <uwe.bugla@gmx.de> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11285): Remove unecessary udelayPatrick Boettcher2009-03-301-1/+0
| | | | | | | When resetting the PID-filter block a safety msleep(1) was injected. Now that the function is called from interrupt context, it was replaced with a udelay. It seems that this delay is not necessary at all, let's remove it for now and test a while. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11284): Fix i2c code of flexcop-driver for rare revisionsPatrick Boettcher2009-03-301-0/+12
| | | | | | | | | This patch adds a workaround in the i2c-code of the flexcop-driver to fix support for SkyStar2 rev 2.7. There are not many devices out there, that's why this bug was not revealed earlier. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (11127): Kconfig: replace all occurrences of CUSTOMIZE to CUSTOMISEMauro Carvalho Chehab2009-03-301-1/+1
| | | | | | | | | | | | | | There are several Kconfig items using CUSTOMIZE. Yet, most use the English writing CUSTOMISE. This generates lots of trouble, because people sometimes type the Kbuild item different. Let's standardise every occurrence using the same syntax. The changes were generated by this small shell script: for i in `find linux -type f`; do sed s,CUSTOMIZE,CUSTOMISE,g $i >/tmp/a && mv /tmp/a $i; done Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (10948): flexcop-pci: Print a message in case the new stream ↵Matthias Schwarzott2009-03-301-0/+1
| | | | | | | | | | | watchdog detects a problem Print a message in case the new software IRQ watchdog detects a problem. I choose the info message category, this can be changed if not appropriate. Cc: Patrick Boettcher <patrick.boettcher@desy.de> Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (10694): [PATCH] software IRQ watchdog for Flexcop B2C2 DVB PCI cardsPatrick Boettcher2009-02-263-25/+44
| | | | | | | | | | | | | | | | | | | With (some) Technisat cards you cannot run multiple DVB applications in parallel and switch the channel at the same time. There seems to be a problem on the interfaces or even inside the flexcop-device that can't handle interruption on the streaming interface. This patch adds a watchdog to check whether data is supposed to come in (streaming PIDs are requested) and if no data is seen within 400ms (default) it resets the streaming/pid-filtering hardware. This patch is urgently needed to support the rev 2.8 of the hardware and solves problem occassionally seen on older hardware. Signed-off-by: Uwe Bugla <uwe.bugla@gmx.de> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (9811): Add support for the CX24113 DVB-S tuner driverPatrick Boettcher2008-12-301-0/+1
| | | | | | | | This commit adds support for the CX24113 DVB-S tuner driver and thus support for the Technisat Skystar2 revision 2.8. The driver was created with the help of Technisat. Thank you very much. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds2008-12-281-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1429 commits) net: Allow dependancies of FDDI & Tokenring to be modular. igb: Fix build warning when DCA is disabled. net: Fix warning fallout from recent NAPI interface changes. gro: Fix potential use after free sfc: If AN is enabled, always read speed/duplex from the AN advertising bits sfc: When disabling the NIC, close the device rather than unregistering it sfc: SFT9001: Add cable diagnostics sfc: Add support for multiple PHY self-tests sfc: Merge top-level functions for self-tests sfc: Clean up PHY mode management in loopback self-test sfc: Fix unreliable link detection in some loopback modes sfc: Generate unique names for per-NIC workqueues 802.3ad: use standard ethhdr instead of ad_header 802.3ad: generalize out mac address initializer 802.3ad: initialize ports LACPDU from const initializer 802.3ad: remove typedef around ad_system 802.3ad: turn ports is_individual into a bool 802.3ad: turn ports is_enabled into a bool 802.3ad: make ntt bool ixgbe: Fix set_ringparam in ixgbe to use the same memory pools. ... Fixed trivial IPv4/6 address printing conflicts in fs/cifs/connect.c due to the conversion to %pI (in this networking merge) and the addition of doing IPv6 addresses (from the earlier merge of CIFS).
| * net: convert more to %pMJohannes Berg2008-10-271-1/+1
| | | | | | | | | | | | | | | | | | A number of places still use %02x:...:%02x because it's in debug statements or for no real reason. Make a few of them use %pM. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* | V4L/DVB (9885): drivers/media Kconfig's: fix bugzilla #12204Mauro Carvalho Chehab2008-12-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the tuner modules were moved to common/tuners, a separate customize option were added for tuners. However, the automatic selection of the tuners were still using the older option. This causes that the automatic selection to fail, if DVB_FE_CUSTOMISE is selected. Also, since those tuners are now under MEDIA_TUNER_CUSTOMIZE menu, if you unset MEDIA_TUNER_CUSTOMIZE, you can't manually select the tuners. This patch fixes this error by replacing DVB_FE_CUSTOMISE by MEDIA_TUNER_CUSTOMIZE on all places were a tuner is selected. The patch were generated by this small script: for i in `find drivers/media -name Kconfig`; do cat $i|perl -ne 's/(MEDIA_TUNER.*)DVB_FE_CUSTOMISE/\1MEDIA_TUNER_CUSTOMIZE/; print $_' >a mv a $i done Also, manually reordered the tuner entries. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* | V4L/DVB (9781): [PATCH] Cablestar 2 I2C retries (fix CableStar2 support)Antti Seppälä2008-12-162-1/+7
|/ | | | | | | | | | | | | | | | At some point the Flexcop driver was changed to support newer Flexcop cards. These modifications however broke the detection of Cablestar 2 DVB-C cards. The reason is that the earlier version of the driver used to retry unsuccessful i2c operations. The demodulator of Cablestar 2 cards (stv0297) seems to be very dependent on these retries and adding them back fixes Cablestar detection. This patch restores this behaviour for the CableStar2. Signed-off-by: Antti Seppälä <a.seppala@gmail.com> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (8745): v4l2: fix a bunch of compile warnings.Hans Verkuil2008-10-121-1/+1
| | | | | Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (9037): Fix support for Hauppauge Nova-S SEPatrick Boettcher2008-10-041-0/+1
| | | | | | | | | | | | | | | | | Different backends have different input busses (saa7146, flexcop). To reflect that a config-option to the s5h1420-driver was added which makes the output mode selectable. Furthermore the s5h1420-driver is now doing the same i2c-method as it was done before adding support for other i2c-users. This patch needs to go into the current release of the kernel, as this driver is currently broken. (Thanks to Eberhard Kaltenhaeuser for helping out to debug this issue.) Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (8877): b2c2 and bt8xx: udelay to mdelayThierry MERLE2008-09-041-1/+2
| | | | | | | | | | | | | | | | | | | | | | b2c2-flexcop, dvb/bt8xx and video/bt8xx fails to build on ARM with: __bad_udelay is specifically designed on ARM to fail when udelay is called in a bad way. arch/arm/include/asm/delay.h has this to say about __bad_udelay: /* * This function intentionally does not exist; if you see references to * it, it means that you're calling udelay() with an out of range value. * * With currently imposed limits, this means that we support a max delay * of 2000us. Further limits: HZ<=1000 and bogomips<=3355 */ extern void __bad_udelay(void); Solution is to replace udelay by a mdelay and udelay with value less than 2000 Signed-off-by: Thierry MERLE <thierry.merle@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (8837): dvb: fix I2C adapters name sizeJean Delvare2008-09-031-6/+6
| | | | | | | | | | | | | | | Some DVB drivers are incorrectly assuming that the size of i2c_adapter.name is I2C_NAME_SIZE. Here's a fix. Also change strncpy to strlcpy, as the former is error-prone (and was indeed incorrectly used.) Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Uwe Bugla <uwe.bugla@gmx.de> Reviewed-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* V4L/DVB (7959): endianness fix in flexcop-usb.cAl Viro2008-06-051-1/+1
| | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (7861): mt312: Prefix functions only with mt312_, Add zl10313 to ↵Matthias Schwarzott2008-05-141-1/+1
| | | | | | | | | | | | | | | | | kconfig description This patch does some small cleanup to mt312. It changes kconfig description to also list the ZL10313. It does change some strange symbol names to be consistent with module name mt312 and naming of all other functions in there. * vp310_mt312_ops -> mt312_ops * vp310_mt312_attach -> mt312_attach Adds a MODULE_AUTHOR for me Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* Rename common tuner Kconfig names to use the sameMauro Carvalho Chehab2008-04-291-1/+1
| | | | namespace for all of them.
* V4L/DVB(7767): Move tuners to common/tunersMauro Carvalho Chehab2008-04-291-1/+1
| | | | | | | | | There were several issues in the past, caused by the hybrid tuner design, since now, the same tuner can be used by drivers/media/dvb and drivers/media/video. Kconfig items were rearranged, to split V4L/DVB core from their drivers. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (7662): stv0299: Fixed some typosOliver Endriss2008-04-241-1/+1
| | | | | | | Fixed some typos. Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (7569): Added support for SkyStar2 rev2.7 and ITD1000 DVB-S tunerPatrick Boettcher2008-04-243-0/+51
| | | | | | | This patches adds support for the SkyStar2 rev2.7 with the PN1010/ITD1000 Frontend. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (7471): SkyStar2: preparing support for the rev2.8Patrick Boettcher2008-04-244-0/+54
| | | | | | | Support is prepared, but the CX24113-driver .c-file is missing. After sorting out the NDA problems, the file will be there immediatly. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (7538): Adds selectable adapter numbers as per module optionJanne Grunau2008-04-241-2/+6
| | | | | | | | | | | | | | | | | | | | The adapter_nr module options can be used to allocate static adapter numbers on a driver level. It avoids problems with changing DVB apapter numbers after warm/cold boot or device unplugging and repluging. Each driver holds DVB_MAX_ADAPTER long array of the preferred order of adapter numbers. options dvb-usb-dib0700 adapter_nr=7,6,5,4,3,2,1,0 would result in a reversed allocation of adapter numbers. With adapter_nr=2,5 it tries first to get adapter number 2 and 5. If both are already in use it will allocate the lowest free adapter number. Signed-off-by: Janne Grunau <janne-dvb@grunau.be> Acked-by: Hermann Pitton <hermann.pitton@arcor.de> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (7509): media/dvb/b2c2 replace remaining __FUNCTION__ occurrencesHarvey Harrison2008-04-242-16/+16
| | | | | | | | __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (7469): Preparation for supporting new devices, cleanup and sanenessPatrick Boettcher2008-04-246-123/+221
| | | | | | | | | | | | To prepare the support for new device to the flexcop-family some preparation and cleanups was done + some saneness: - created an i2c-adapter for each i2c-port available. Easier usage for devices with several device on different i2c-busses - initialize i2c before doing the eeprom read - changed the way to attach the different frontends, easier to read now - enabled support for i2c-devices having no register address (1-byte access) Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (7441): kconfig fixes for tuner-simpleMichael Krufky2008-04-241-0/+1
| | | | | | | | | | | Update Kconfig for the hybrid devices recently converted to use tuner-simple rather than dvb-pll. dvb-bt8xx no longer uses dvb-pll at all, so remove all references to dvb-pll within that driver. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (7412): use tuner-simple for LG TDVS-H06xF digital tuning supportMichael Krufky2008-04-242-1/+6
| | | | | | | | Convert cx88-dvb, dvb-bt8xx, b2c2-flexcop, cxusb and cx23885 to use tuner-simple instead of dvb-pll for LG TDVS-H06xF Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (7094): static memoryDouglas Schilling Landgraf2008-04-241-1/+1
| | | | | | | | - Static memory is always initialized with 0. - Replaced in some cases C99 comments for /* */ Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (6573): unexport flexcop_reset_block_300Adrian Bunk2008-01-251-1/+0
| | | | | | | This patch removes the unused EXPORT_SYMBOL(flexcop_reset_block_300). Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (6042): b2c2-flexcop: fix Airstar HD5000 tuning regressionTrent Piepho2007-08-231-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Git changeset 6bdcc6e6dbab8daffd05e5026486f34ba41a6c72 dropped the stand-alone lgh06xf module, whose functionality was absorbed into the dvb-pll module. However, there was a minor difference between the code in lgh06xf and dvb-pll, which caused a regression in b2c2-flexcop devices using the LG-H06xF NIM. dvb-pll will probe for the presence of an i2c pll chip by performing a single byte read, the lgh06xf driver did not do this. Unfortunately, the code in flexcop-i2c.c does not currently support 1 byte or 0 byte reads as a probe. Such probes with the current code will always fail. In order to work around this problem, and restore proper functionality of the Airstar HD5000 device, this hack was created to make the probe appear to succeed. The single byte read in dvb_pll_attach is the only place where such a probe would ever occur, so this change is safe, and will not affect any other devices. Of course, if one knew how to actually perform the read operation, it would be better to go that route. In the meantime, however, we must apply this workaround, in order to prevent the regression that causes tuning to fail on the Airstar HD5000 ATSC device. Thanks to Jarod Wilson, who had originally reported this regression, and to Geoffrey Hausheer, whose original workaround patch led us to find the actual cause of the problem. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Cc: Geoffrey Hausheer <inli3epy93n@phracturedblue.com> Acked-by: Jarod Wilson <jwilson@redhat.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5780): Dvb: Remove static dependencies on dvb-pllMichael Krufky2007-07-182-3/+3
| | | | | | | | | | | | | | This patch removes all static dependencies on the dvb-pll module. All exported dvb_pll_desc's have been UNexported, and the caller will reference the individual dvb_pll_desc by it's index in the pll_list array. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Acked-by: Oliver Endriss <o.endriss@gmx.de> Acked-by: Manu Abraham <manu@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5745): Dvb: use '+=' instead of '=' for EXTRA_CFLAGSTrent Piepho2007-07-181-1/+1
| | | | | | | | | | | | | The Makefiles in the dvb directory tree used '=' when defining EXTRA_CFLAGS rather than '+=', which is far more common in the rest of the kernel source. = 14 times (9 of which this patch removes) := 25 times += 123 times This change also has certain advantages for the out of kernel v4l-dvb build system. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5761): Fix broken b2c2 dependency on non x86 architecturesMauro Carvalho Chehab2007-06-081-2/+5
| | | | | | | | | | | | | | | | | | This patch moves flexcop-dma (currently used only by flexcop-pci) to b2c2-flexcop-pci module, that is dependent on CONFIG_PCI, fixing the bug as reported by Geert Uytterhoeven <geert@linux-m68k.org>: drivers/media/dvb/b2c2/flexcop-dma.c uses the PCI DMA API, but DVB_B2C2_FLEXCOP doesn't depend on PCI, causing the following problem on PCI-less systems: | linux/drivers/media/dvb/b2c2/flexcop-dma.c:20: warning: implicit declaration of function 'pci_alloc_consistent' | linux/drivers/media/dvb/b2c2/flexcop-dma.c:20: warning: implicit declaration of function 'pci_alloc_consistent' Apparently this is the flexcop DMA core, which is used by both DVB_B2C2_FLEXCOP_PCI and DVB_B2C2_FLEXCOP_USB. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* i2c: Shrink struct i2c_clientDavid Brownell2007-05-011-1/+2
| | | | | | | | | | | | | | | | | | | | | | This shrinks the size of "struct i2c_client" by 40 bytes: - Substantially shrinks the string used to identify the chip type - The "flags" don't need to be so big - Removes some internal padding It also adds kerneldoc for that struct, explaining how "name" is really a chip type identifier; it's otherwise potentially confusing. Because the I2C_NAME_SIZE symbol was abused for both i2c_client.name and for i2c_adapter.name, this needed to affect i2c_adapter too. The adapters which used that symbol now use the more-obviously-correct idiom of taking the size of that field. JD: Shorten i2c_adapter.name from 50 to 48 bytes while we're here, to avoid wasting space in padding. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* V4L/DVB (5505): Fix Kernel Bugzilla #8301: spinlock fix for flexcop-pciHendrik Borghorst2007-04-271-4/+5
| | | | | | | If you modprobe the b2c2-flexcop-pci module you got a hardlock of your system. This is due the usage of spin_lock before spin_lock_init is called. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (5363): Dvb: Remove lgh06xf driverTrent Piepho2007-04-272-3/+1
| | | | | | | | | | | | | | | | | | | | The code of the dvb-pll driver and the lgh06xf driver is nearly identical. The main difference is that the lgh06xf driver would set the AGC TOP value on every tune call. The dvb-pll driver now has the ability to set the AGC TOP when the front-end device is opened, which is a better way to go about it. By using this ability of dvb-pll, the lgh06xf driver is made unnecessary. There is one other difference. dvb-pll will probe for the presence of an I2C pll chip by doing a one byte read, the lgh06xf driver did not do this. In some devices the PLL is not reachable over I2C at the timer the tuner is attached. Some more initialization, such as firmware loading, must take place first. None of the devices using a LG-H06xF should have this problem. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Acked-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* V4L/DVB (4999): [PATCH] Cablestar2 supportAntti Seppälä2007-02-211-55/+35
| | | | | | | | | | | | This patch changes the initialization of alps tdee4 tuner in flexcop-fe-tuner.c to match what is used in the old driver that was written specifically for Cablestar cards by Patrick Boettcher. This patch should make Cablestar2 work again with recent dvb drivers without breaking other stv0297 based cards. Signed-off-by: Antti Seppala <ajhseppa@niksula.hut.fi> Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* i2c: Declare more i2c_adapter parent devicesJean Delvare2007-02-131-0/+1
| | | | | | | | | | | | | | | Declare the parent device of i2c_adapter devices each time we can easily do so. It makes the i2c_adapter appear at the right place in the device tree, rather than as a platform device. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Len Brown <len.brown@intel.com> Cc: Jordan Crouse <jordan.crouse@amd.com> Cc: Jody McIntyre <scjody@modernduck.com> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: v4l-dvb-maintainer@linuxtv.org Cc: Petr Vandrovec <vandrove@vc.cvut.cz>
* V4L/DVB (4846): Create new lgh06xf atsc tuner moduleMichael Krufky2006-12-102-8/+3
| | | | | | | | | | | | | This patch creates a new atsc tuner module for the LG TDVS-H06xF ATSC tuners, called lgh06xf. The purpose of this change is to reduce some duplicated code, and to allow the lgh06xf tuner code to take advantage of dvb_attach(). As a side effect, the dependency of dvb-bt8xx on dvb-pll has been removed, since the lgh06xf module itself will use dvb-pll, while remaining optional for the dvb-bt8xx driver through the use of DVB_FE_CUSTOMISE Acked-by: Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
OpenPOWER on IntegriCloud