summaryrefslogtreecommitdiffstats
path: root/drivers/media/dvb-frontends
Commit message (Collapse)AuthorAgeFilesLines
* [media] cx24120: make sure tuner is locked at get_frontendJemma Denson2016-03-031-1/+3
| | | | | | | | | | | | Change get_frontend to re-check current lock status rather than relying on a cached value from get_status. Removes potential for tuning failure if get_frontend is called during tuning. Probably not too essential as other changes work around this: https://patchwork.linuxtv.org/patch/32845/ Signed-off-by: Jemma Denson <jdenson@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] rtl2832: move stats polling to read statusAntti Palosaari2016-03-032-50/+30
| | | | | | | | Do statistics polling on read status in order to avoid unnecessary delayed work. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] rtl2832: improve slave TS controlAntti Palosaari2016-03-032-34/+42
| | | | | | | | Add callback parameter to select enable / disable slave TS and use it when slave demod is in use. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] mn88473: finalize driverAntti Palosaari2016-03-033-163/+246
| | | | | | | | | | | Finalize the driver. It still lacks a lot of features, like all statistics and PLP filtering, but basic functionality and sensitivity is pretty good shape. Signed-off-by: Antti Palosaari <crope@iki.fi> Reviewed-by: Benjamin Larsson <benjamin@southpole.se> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] mn88473: move out of stagingAntti Palosaari2016-03-034-0/+568
| | | | | | | Move driver to drivers. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] au0828: use standard demod pads structMauro Carvalho Chehab2016-03-033-14/+6
| | | | | | | | As we want au0828 to use the core function to create the MC graphs, use enum demod_pad_index instead of enum au8522_media_pads. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] dib0090: Do the right check for state->rf_rampMauro Carvalho Chehab2016-03-011-1/+1
| | | | | | | Smatch with -pkernel --no-data keeps complaining about rf_ramp: drivers/media/dvb-frontends/dib0090.c:1119 dib0090_pwm_gain_reset() error: we previously assumed 'state->rf_ramp' could be null (see line 1086) Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] drxj: don't do math if not neededMauro Carvalho Chehab2016-03-011-4/+5
| | | | | | | | | | | | | | | | | | While there's no risk of divison by zero, the logic there is akward, as it does the calculus for the numerator and denominator before checking if this will be used. Change the order to check first if the denominator is zero, and only calculating the numerator/denominator if not. This should also avoid those smatch errors: drivers/media/dvb-frontends/drx39xyj/drxj.c:9605 ctrl_get_qam_sig_quality() debug: sval_binop_unsigned: divide by zero drivers/media/dvb-frontends/drx39xyj/drxj.c:9605 ctrl_get_qam_sig_quality() debug: sval_binop_unsigned: divide by zero drivers/media/dvb-frontends/drx39xyj/drxj.c:9605 ctrl_get_qam_sig_quality() debug: sval_binop_unsigned: divide by zero drivers/media/dvb-frontends/drx39xyj/drxj.c:9605 ctrl_get_qam_sig_quality() debug: sval_binop_unsigned: divide by zero drivers/media/dvb-frontends/drx39xyj/drxj.c:9605 ctrl_get_qam_sig_quality() debug: sval_binop_unsigned: divide by zero Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] media: au8522 change to create MC pad for ALSA Audio OutShuah Khan2016-02-272-0/+2
| | | | | | | Add new pad for ALSA Audio Out to au8522_media_pads. Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] media: Move au8522_media_pads enum to au8522.h from au8522_priv.hShuah Khan2016-02-272-8/+7
| | | | | | | | | Move the au8522_media_pads enum to au8522.h from au8522_priv.h to export them. This will allow au0828-core to use these defines instead of hard-coding them them. Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] drxj: set_param_parameters array is too shortMauro Carvalho Chehab2016-02-231-1/+1
| | | | | | | Fixes this smatch warning: drivers/media/dvb-frontends/drx39xyj/drxj.c:4151 drxj_dap_scu_atomic_read_write_block() error: buffer overflow 'set_param_parameters' 15 <= 17 Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] dib9000: read16/write16 could return an error codeMauro Carvalho Chehab2016-02-231-2/+2
| | | | | | | | | | | | | Both dib9000_read16_attr and dib9000_write16_attr can return an error code. However, they currently return an u16. This produces the following warnings on smatch: drivers/media/dvb-frontends/dib9000.c:262 dib9000_read16_attr() warn: signedness bug returning '(-121)' drivers/media/dvb-frontends/dib9000.c:321 dib9000_write16_attr() warn: signedness bug returning '(-22)' drivers/media/dvb-frontends/dib9000.c:353 dib9000_write16_attr() warn: signedness bug returning '(-121)' Reviewed-by: Michael Ira Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] stv0900: avoid going past arrayMauro Carvalho Chehab2016-02-231-2/+5
| | | | | | | | | | | | Fix the following smatch warnings: drivers/media/dvb-frontends/stv0900_core.c:1183 stv0900_get_optim_carr_loop() error: buffer overflow 'cllas2' 11 <= 13 drivers/media/dvb-frontends/stv0900_core.c:1185 stv0900_get_optim_carr_loop() error: buffer overflow 'cllas2' 11 <= 13 drivers/media/dvb-frontends/stv0900_core.c:1187 stv0900_get_optim_carr_loop() error: buffer overflow 'cllas2' 11 <= 13 drivers/media/dvb-frontends/stv0900_core.c:1189 stv0900_get_optim_carr_loop() error: buffer overflow 'cllas2' 11 <= 13 drivers/media/dvb-frontends/stv0900_core.c:1191 stv0900_get_optim_carr_loop() error: buffer overflow 'cllas2' 11 <= 13 Reviewed-by: Michael Ira Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] dib0090: do the right thing if rf_ramp is NULLMauro Carvalho Chehab2016-02-231-3/+9
| | | | | | | As warned by smatch: drivers/media/dvb-frontends/dib0090.c:1118 dib0090_pwm_gain_reset() error: we previously assumed 'state->rf_ramp' could be null (see line 1086) Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* Merge tag 'v4.5-rc3' into patchworkMauro Carvalho Chehab2016-02-091-0/+9
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Linux 4.5-rc3 * tag 'v4.5-rc3': (644 commits) Linux 4.5-rc3 epoll: restrict EPOLLEXCLUSIVE to POLLIN and POLLOUT radix-tree: fix oops after radix_tree_iter_retry MAINTAINERS: trim the file triggers for ABI/API dax: dirty inode only if required thp: make deferred_split_scan() work again mm: replace vma_lock_anon_vma with anon_vma_lock_read/write ocfs2/dlm: clear refmap bit of recovery lock while doing local recovery cleanup um: asm/page.h: remove the pte_high member from struct pte_t mm, hugetlb: don't require CMA for runtime gigantic pages mm/hugetlb: fix gigantic page initialization/allocation mm: downgrade VM_BUG in isolate_lru_page() to warning mempolicy: do not try to queue pages from !vma_migratable() mm, vmstat: fix wrong WQ sleep when memory reclaim doesn't make any progress vmstat: make vmstat_update deferrable mm, vmstat: make quiet_vmstat lighter mm/Kconfig: correct description of DEFERRED_STRUCT_PAGE_INIT memblock: don't mark memblock_phys_mem_size() as __init dump_stack: avoid potential deadlocks mm: validate_mm browse_rb SMP race condition ...
| * [media] tda1004x: only update the frontend properties if lockedMauro Carvalho Chehab2016-02-041-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The tda1004x was updating the properties cache before locking. If the device is not locked, the data at the registers are just random values with no real meaning. This caused the driver to fail with libdvbv5, as such library calls GET_PROPERTY from time to time, in order to return the DVB stats. Tested with a saa7134 card 78: ASUSTeK P7131 Dual, vendor PCI ID: 1043:4862 Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] dvb_frontend: pass the props cache to get_frontend() as argMauro Carvalho Chehab2016-02-0459-203/+218
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of using the DTV properties cache directly, pass the get frontend data as an argument. For now, everything should remain the same, but the next patch will prevent get_frontend to affect the global cache. This is needed because several drivers don't care enough to only change the properties if locked. Due to that, calling G_PROPERTY before locking on those drivers will make them to never lock. Ok, those drivers are crap and should never be merged like that, but the core should not rely that the drivers would be doing the right thing. Reviewed-by: Michael Ira Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] mb86a20s: get rid of dummy get_frontend()Mauro Carvalho Chehab2016-02-041-11/+0
| | | | | | | | | | | | | | This is not needed, as the core handles well if get_frontend() is not present. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] lgs8gxx: don't export get_frontend() callbackMauro Carvalho Chehab2016-02-041-12/+1
| | | | | | | | | | | | | | | | | | | | | | This device doesn't really have a get_frontend(). All it does is to blindly set everything to auto mode. Remove the get_frontend(), as the code does that already, and put the frontend changes at set_frontend, where it belongs. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] dvb-frontend: Use boottimeAbhilash Jindal2016-02-011-2/+2
| | | | | | | | | | | | | | | | | | | | | | Wall time obtained from ktime_get_real is susceptible to sudden jumps due to user setting the time or due to NTP. Boot time is constantly increasing time better suited for comparing two timestamps. [mchehab@osg.samsung.com: fix trivial merge conflicts] Signed-off-by: Abhilash Jindal <klock.android@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] ts2020: cancel_delayed_work_sync before device removal / kfreeErnst Martin Witte2016-02-011-0/+4
| | | | | | | | | | | | | | | | | | ts2020_remove was calling kfree(dev) with possibly still active schedule_delayed_work(dev->stat_work). A similar bug in si2157 caused kernel panics in call_timer_fn e.g. after rmmod cx23885. Signed-off-by: Ernst Martin Witte <emw-linux-kernel@nocabal.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] rtl2830: cancel_delayed_work_sync before device removal / kfreeErnst Martin Witte2016-02-011-0/+3
| | | | | | | | | | | | | | | | | | rtl2830_remove was calling kfree(dev) with possibly still active schedule_delayed_work(&dev->stat_work). A similar bug in si2157 caused kernel panics in call_timer_fn e.g. after rmmod cx23885. Signed-off-by: Ernst Martin Witte <emw-linux-kernel@nocabal.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] af9033: cancel_delayed_work_sync before device removal / kfreeErnst Martin Witte2016-02-011-0/+3
| | | | | | | | | | | | | | | | | | af9033_remove was calling kfree(dev) with possibly still active schedule_delayed_work(&dev->stat_work). A similar bug in si2157 caused kernel panics in call_timer_fn e.g. after rmmod cx23885. Signed-off-by: Ernst Martin Witte <emw-linux-kernel@nocabal.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] af9013: cancel_delayed_work_sync before device removal / kfreeErnst Martin Witte2016-02-011-0/+4
| | | | | | | | | | | | | | | | | | af9013_remove was calling kfree(state) with possibly still active schedule_delayed_work(&state->statistics_work). A similar bug in si2157 caused kernel panics in call_timer_fn e.g. after rmmod cx23885. Signed-off-by: Ernst Martin Witte <emw-linux-kernel@nocabal.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] constify stv6110x_devctl structureJulia Lawall2016-02-013-5/+5
| | | | | | | | | | | | | | | | | | | | | | The stv6110x_devctl structure is never modified, so declare it as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] si2165: Refactoring for si2165_writereg_mask8()Markus Elfring2016-01-251-9/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This issue was detected by using the Coccinelle software. 1. Let us return directly if a call of the si2165_readreg8() function failed. 2. Reduce the scope for the local variables "ret" and "tmp" to one branch of an if statement. 3. Delete the jump label "err" then. 4. Return the value from a call of the si2165_writereg8() function without using an extra assignment for the variable "ret" at the end. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] : cxd2830r: use gpiochip data pointerLinus Walleij2016-01-251-7/+4
| | | | | | | | | | | | | | | | | | | | This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Antti Palosaari <crope@iki.fi> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] si2165: Reject DVB-T bandwidth auto modeMatthias Schwarzott2016-01-251-7/+7
| | | | | | | | | | | | | | | | The si2165 does not support bandwidth auto-detection. Reject the request. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] media: change email addressPatrick Boettcher2016-01-2515-25/+25
|/ | | | | | | | | Soon my dibcom.fr/parrot.com-address won't respond anymore. Thus I'm replacing it. And, while being at it, let's adapt some other (old) email-addresses as well. Signed-off-by: Patrick Boettcher <patrick.boettcher@posteo.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* Merge tag 'gpio-v4.5-1' of ↵Linus Torvalds2016-01-171-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "Here is the bulk of GPIO changes for v4.5. Notably there are big refactorings mostly by myself, aimed at getting the gpio_chip into a shape that makes me believe I can proceed to preserve state for a proper userspace ABI (character device) that has already been proposed once, but resulted in the feedback that I need to go back and restructure stuff. So I've been restructuring stuff. On the way I ran into brokenness (return code from the get_value() callback) and had to fix it. Also, refactored generic GPIO to be simpler. Some of that is still waiting to trickle down from the subsystems all over the kernel that provide random gpio_chips, I've touched every single GPIO driver in the kernel now, oh man I didn't know I was responsible for so much... Apart from that we're churning along as usual. I took some effort to test and retest so it should merge nicely and we shook out a couple of bugs in -next. Infrastructural changes: - In struct gpio_chip, rename the .dev node to .parent to better reflect the fact that this is not the GPIO struct device abstraction. We will add that soon so this would be totallt confusing. - It was noted that the driver .get_value() callbacks was sometimes reporting negative -ERR values to the gpiolib core, expecting them to be propagated to consumer gpiod_get_value() and gpio_get_value() calls. This was not happening, so as there was a mess of drivers returning negative errors and some returning "anything else than zero" to indicate that a line was active. As some would have bit 31 set to indicate "line active" it clashed with negative error codes. This is fixed by the largeish series clamping values in all drivers with !!value to [0,1] and then augmenting the code to propagate error codes to consumers. (Includes some ACKed patches in other subsystems.) - Add a void *data pointer to struct gpio_chip. The container_of() design pattern is indeed very nice, but we want to reform the struct gpio_chip to be a non-volative, stateless business, and keep states internal to the gpiolib to be able to hold on to the state when adding a proper userspace ABI (character device) further down the road. To achieve this, drivers need a handle at the internal state that is not dependent on their struct gpio_chip() so we add gpiochip_add_data() and gpiochip_get_data() following the pattern of many other subsystems. All the "use gpiochip data pointer" patches transforms drivers to this scheme. - The Generic GPIO chip header has been merged into the general <linux/gpio/driver.h> header, and the custom header for that removed. Instead of having a separate mm_gpio_chip struct for these generic drivers, merge that into struct gpio_chip, simplifying the code and removing the need for separate and confusing includes. Misc improvements: - Stabilize the way GPIOs are looked up from the ACPI legacy specification. - Incremental driver features for PXA, PCA953X, Lantiq (patches from the OpenWRT community), RCAR, Zynq, PL061, 104-idi-48 New drivers: - Add a GPIO chip to the ALSA SoC AC97 driver. - Add a new Broadcom NSP SoC driver (this lands in the pinctrl dir, but the branch is merged here too to account for infrastructural changes). - The sx150x driver now supports the sx1502" * tag 'gpio-v4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (220 commits) gpio: generic: make bgpio_pdata always visible gpiolib: fix chip order in gpio list gpio: mpc8xxx: Do not use gpiochip_get_data() in mpc8xxx_gpio_save_regs() gpio: mm-lantiq: Do not use gpiochip_get_data() in ltq_mm_save_regs() gpio: brcmstb: Allow building driver for BMIPS_GENERIC gpio: brcmstb: Set endian flags for big-endian MIPS gpio: moxart: fix build regression gpio: xilinx: Do not use gpiochip_get_data() in xgpio_save_regs() leds: pca9532: use gpiochip data pointer leds: tca6507: use gpiochip data pointer hid: cp2112: use gpiochip data pointer bcma: gpio: use gpiochip data pointer avr32: gpio: use gpiochip data pointer video: fbdev: via: use gpiochip data pointer gpio: pch: Optimize pch_gpio_get() Revert "pinctrl: lantiq: Implement gpio_chip.to_irq" pinctrl: nsp-gpio: use gpiochip data pointer pinctrl: vt8500-wmt: use gpiochip data pointer pinctrl: exynos5440: use gpiochip data pointer pinctrl: at91-pio4: use gpiochip data pointer ...
| * gpio: change member .dev to .parentLinus Walleij2015-11-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | Merge branch 'for-linus' of ↵Linus Torvalds2016-01-142-3/+3
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: floppy: make local variable non-static exynos: fixes an incorrect header guard dt-bindings: fixes some incorrect header guards cpufreq-dt: correct dead link in documentation cpufreq: ARM big LITTLE: correct dead link in documentation treewide: Fix typos in printk Documentation: filesystem: Fix typo in fs/eventfd.c fs/super.c: use && instead of & for warn_on condition Documentation: fix sysfs-ptp lib: scatterlist: fix Kconfig description
| * | treewide: Fix typos in printkMasanari Iida2015-12-082-3/+3
| |/ | | | | | | | | | | | | | | | | This patch fix multiple spelling typos found in various part of kernel. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | [media] media framework: rename pads init function to media_entity_pads_init()Mauro Carvalho Chehab2016-01-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With the MC next gen rework, what's left for media_entity_init() is to just initialize the PADs. However, certain devices, like a FLASH led/light doesn't have any input or output PAD. So, there's no reason why calling media_entity_init() would be mandatory. Also, despite its name, what this function actually does is to initialize the PADs data. So, rename it to media_entity_pads_init() in order to reflect that. The media entity actual init happens during entity register, at media_device_register_entity(). We should move init of num_links and num_backlinks to it. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] uapi/media.h: Rename entities types to functionsMauro Carvalho Chehab2016-01-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rename the userspace types from MEDIA_ENT_T_ to MEDIA_ENT_F_ and add the backward compatibility bits. The changes at the .c files was generated by the following coccinelle script: @@ @@ -MEDIA_ENT_T_UNKNOWN +MEDIA_ENT_F_UNKNOWN @@ @@ -MEDIA_ENT_T_DVB_BASE +MEDIA_ENT_F_DVB_BASE @@ @@ -MEDIA_ENT_T_V4L2_BASE +MEDIA_ENT_F_V4L2_BASE @@ @@ -MEDIA_ENT_T_V4L2_SUBDEV_BASE +MEDIA_ENT_F_V4L2_SUBDEV_BASE @@ @@ -MEDIA_ENT_T_CONNECTOR_BASE +MEDIA_ENT_F_CONNECTOR_BASE @@ @@ -MEDIA_ENT_T_V4L2_VIDEO +MEDIA_ENT_F_IO_V4L @@ @@ -MEDIA_ENT_T_V4L2_VBI +MEDIA_ENT_F_IO_VBI @@ @@ -MEDIA_ENT_T_V4L2_SWRADIO +MEDIA_ENT_F_IO_SWRADIO @@ @@ -MEDIA_ENT_T_V4L2_SUBDEV_UNKNOWN +MEDIA_ENT_F_V4L2_SUBDEV_UNKNOWN @@ @@ -MEDIA_ENT_T_CONN_RF +MEDIA_ENT_F_CONN_RF @@ @@ -MEDIA_ENT_T_CONN_SVIDEO +MEDIA_ENT_F_CONN_SVIDEO @@ @@ -MEDIA_ENT_T_CONN_COMPOSITE +MEDIA_ENT_F_CONN_COMPOSITE @@ @@ -MEDIA_ENT_T_CONN_TEST +MEDIA_ENT_F_CONN_TEST @@ @@ -MEDIA_ENT_T_V4L2_SUBDEV_SENSOR +MEDIA_ENT_F_CAM_SENSOR @@ @@ -MEDIA_ENT_T_V4L2_SUBDEV_FLASH +MEDIA_ENT_F_FLASH @@ @@ -MEDIA_ENT_T_V4L2_SUBDEV_LENS +MEDIA_ENT_F_LENS @@ @@ -MEDIA_ENT_T_V4L2_SUBDEV_DECODER +MEDIA_ENT_F_ATV_DECODER @@ @@ -MEDIA_ENT_T_V4L2_SUBDEV_TUNER +MEDIA_ENT_F_TUNER @@ @@ -MEDIA_ENT_T_DVB_DEMOD +MEDIA_ENT_F_DTV_DEMOD @@ @@ -MEDIA_ENT_T_DVB_DEMUX +MEDIA_ENT_F_TS_DEMUX @@ @@ -MEDIA_ENT_T_DVB_TSOUT +MEDIA_ENT_F_IO_DTV @@ @@ -MEDIA_ENT_T_DVB_CA +MEDIA_ENT_F_DTV_CA @@ @@ -MEDIA_ENT_T_DVB_NET_DECAP +MEDIA_ENT_F_DTV_NET_DECAP Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] media-entity.h: rename entity.type to entity.functionMauro Carvalho Chehab2016-01-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Entities should have one or more functions. Calling it as a type proofed to not be correct, as an entity could eventually have more than one type. So, rename the field as function. Please notice that this patch doesn't extend support for multiple function entities. Such change will happen when we have real case drivers using it. No functional changes. Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] media: get rid of unused "extra_links" param on media_entity_init()Mauro Carvalho Chehab2016-01-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, media_entity_init() creates an array with the links, allocated at init time. It provides a parameter (extra_links) that would allocate more links than the current needs, but this is not used by any driver. As we want to be able to do dynamic link allocation/removal, we'll need to change the implementation of the links. So, before doing that, let's first remove that extra unused parameter, in order to cleanup the interface first. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] au0828: Add support for media controllerRafael Lourenço de Lima Chehab2016-01-112-0/+29
| | | | | | | | | | | | | | Add support for analog and dvb tv using media controller. Signed-off-by: Rafael Lourenço de Lima Chehab <chehabrafael@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] rtl2832: do not filter out slave TS null packetsAntti Palosaari2015-12-231-12/+0
| | | | | | | | | | | | | | | | | | Do not remove slave TS NULL padding PID (0x1fff) by default as there is no real need. After that whole TS is passed to kernel sw PID filter. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] rtl2832: print reg number on error caseAntti Palosaari2015-12-231-3/+6
| | | | | | | | | | | | | | | | It is hard to debug possible I2C failures without knowing the possible register itself. Add register number to error printing. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] au8522: Avoid memory leak for device config dataMauro Carvalho Chehab2015-12-214-26/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As reported by kmemleak: unreferenced object 0xffff880321e1da40 (size 32): comm "modprobe", pid 3309, jiffies 4295019569 (age 2359.636s) hex dump (first 32 bytes): 47 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 G............... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff82278c8e>] kmemleak_alloc+0x4e/0xb0 [<ffffffff8153c08c>] kmem_cache_alloc_trace+0x1ec/0x280 [<ffffffffa13a896a>] au8522_probe+0x19a/0xa30 [au8522_decoder] [<ffffffff81de0032>] i2c_device_probe+0x2b2/0x490 [<ffffffff81ca7004>] driver_probe_device+0x454/0xd90 [<ffffffff81ca7c1b>] __device_attach_driver+0x17b/0x230 [<ffffffff81ca15da>] bus_for_each_drv+0x11a/0x1b0 [<ffffffff81ca6a4d>] __device_attach+0x1cd/0x2c0 [<ffffffff81ca7d43>] device_initial_probe+0x13/0x20 [<ffffffff81ca451f>] bus_probe_device+0x1af/0x250 [<ffffffff81c9e0f3>] device_add+0x943/0x13b0 [<ffffffff81c9eb7a>] device_register+0x1a/0x20 [<ffffffff81de8626>] i2c_new_device+0x5d6/0x8f0 [<ffffffffa0d88ea4>] v4l2_i2c_new_subdev_board+0x1e4/0x250 [v4l2_common] [<ffffffffa0d88fe7>] v4l2_i2c_new_subdev+0xd7/0x110 [v4l2_common] [<ffffffffa13b2f76>] au0828_card_analog_fe_setup+0x2e6/0x3f0 [au0828] Checking where the error happens: (gdb) list *au8522_probe+0x19a 0x99a is in au8522_probe (drivers/media/dvb-frontends/au8522_decoder.c:761). 756 printk(KERN_INFO "au8522_decoder attach existing instance.\n"); 757 break; 758 } 759 760 demod_config = kzalloc(sizeof(struct au8522_config), GFP_KERNEL); 761 if (demod_config == NULL) { 762 if (instance == 1) 763 kfree(state); 764 return -ENOMEM; 765 } Shows that the error path is not being handled properly. The are actually several issues here: 1) config free should have been calling hybrid_tuner_release_state() function, by calling au8522_release_state(); 2) config is only allocated at the digital part. On the analog one, it is received from the caller. A complex logic could be added to address it, however, it is simpler to just embeed config inside the state. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] media: videobuf2: Move timestamp to vb2_bufferJunghak Sung2015-12-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Move timestamp from struct vb2_v4l2_buffer to struct vb2_buffer for common use, and change its type to u64 in order to handling y2038 problem. This patch also includes all device drivers' changes related to this restructuring. Signed-off-by: Junghak Sung <jh1009.sung@samsung.com> Signed-off-by: Geunyoung Kim <nenggun.kim@samsung.com> Acked-by: Seung-Woo Kim <sw0312.kim@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] vb2: drop v4l2_format argument from queue_setupHans Verkuil2015-12-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The queue_setup callback has a void pointer that is just for V4L2 and is the pointer to the v4l2_format struct that was passed to VIDIOC_CREATE_BUFS. The idea was that drivers would use the information from that struct to buffers suitable for the requested format. After the vb2 split series this pointer is now a void pointer, which is ugly, and the reality is that all existing drivers will effectively just look at the sizeimage field of v4l2_format. To make this more generic the queue_setup callback is changed: the void pointer is dropped, instead if the *num_planes argument is 0, then use the current format size, if it is non-zero, then it contains the number of requested planes and the sizes array contains the requested sizes. If either is unsupported, then return -EINVAL, otherwise use the requested size(s). Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] use https://linuxtv.org for LinuxTV URLsMauro Carvalho Chehab2015-12-0412-12/+12
| | | | | | | | | | | | | | | | | | | | | | While https was always supported on linuxtv.org, only in Dec 3 2015 the website is using valid certificates. As we're planning to drop pure http support on some future, change all references at the media subsystem to point to the https URL instead. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] tda10071: Fix dependency to REGMAP_I2CMatthias Schwarzott2015-12-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | Without I get this error for by dvb-card: tda10071: Unknown symbol devm_regmap_init_i2c (err 0) cx23885_dvb_register() dvb_register failed err = -22 cx23885_dev_setup() Failed to register dvb adapters on VID_B Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] si2165: Add DVB-C support for HVR-4400/HVR-5500Matthias Schwarzott2015-12-031-5/+81
| | | | | | | | | | | | | | | | | | It works only for HVR-4400/HVR-5500. For WinTV-HVR-930C-HD it fails with bad/no reception for unknown reasons. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] si2165: Prepare si2165_set_frontend() for future DVB-C supportMatthias Schwarzott2015-12-031-14/+37
| | | | | | | | | | | | | | | | The current si2165_set_frontend() function actually works only for DVB-T. Split it into two functions, preparing the code to support DVB-C. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] si2165: set list of DVB-T registers togetherMatthias Schwarzott2015-12-031-47/+26
| | | | | | | | | | | | | | Use si2165_write_reg_list() to do the DVB-T mode initialization altogether. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] si2165: Simplify si2165_set_if_freq_shift usageMatthias Schwarzott2015-12-031-13/+13
| | | | | | | | | | | | | | | | | | si2165_set_if_freq_shift() needs to call get_if_frequency() in order to do the right shift. Add such logic inside the function, simplifying the logic for the callers. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] si2165: move setting ts config to initMatthias Schwarzott2015-12-031-13/+14
| | | | | | | | | | | | | | The TS config is fixed, so no need to write it for each tune. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
OpenPOWER on IntegriCloud