summaryrefslogtreecommitdiffstats
path: root/drivers/media/dvb-frontends
Commit message (Collapse)AuthorAgeFilesLines
* [media] tda1004x: only update the frontend properties if lockedMauro Carvalho Chehab2016-02-041-0/+9
| | | | | | | | | | | | | | | | The tda1004x was updating the properties cache before locking. If the device is not locked, the data at the registers are just random values with no real meaning. This caused the driver to fail with libdvbv5, as such library calls GET_PROPERTY from time to time, in order to return the DVB stats. Tested with a saa7134 card 78: ASUSTeK P7131 Dual, vendor PCI ID: 1043:4862 Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* Merge tag 'gpio-v4.5-1' of ↵Linus Torvalds2016-01-171-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "Here is the bulk of GPIO changes for v4.5. Notably there are big refactorings mostly by myself, aimed at getting the gpio_chip into a shape that makes me believe I can proceed to preserve state for a proper userspace ABI (character device) that has already been proposed once, but resulted in the feedback that I need to go back and restructure stuff. So I've been restructuring stuff. On the way I ran into brokenness (return code from the get_value() callback) and had to fix it. Also, refactored generic GPIO to be simpler. Some of that is still waiting to trickle down from the subsystems all over the kernel that provide random gpio_chips, I've touched every single GPIO driver in the kernel now, oh man I didn't know I was responsible for so much... Apart from that we're churning along as usual. I took some effort to test and retest so it should merge nicely and we shook out a couple of bugs in -next. Infrastructural changes: - In struct gpio_chip, rename the .dev node to .parent to better reflect the fact that this is not the GPIO struct device abstraction. We will add that soon so this would be totallt confusing. - It was noted that the driver .get_value() callbacks was sometimes reporting negative -ERR values to the gpiolib core, expecting them to be propagated to consumer gpiod_get_value() and gpio_get_value() calls. This was not happening, so as there was a mess of drivers returning negative errors and some returning "anything else than zero" to indicate that a line was active. As some would have bit 31 set to indicate "line active" it clashed with negative error codes. This is fixed by the largeish series clamping values in all drivers with !!value to [0,1] and then augmenting the code to propagate error codes to consumers. (Includes some ACKed patches in other subsystems.) - Add a void *data pointer to struct gpio_chip. The container_of() design pattern is indeed very nice, but we want to reform the struct gpio_chip to be a non-volative, stateless business, and keep states internal to the gpiolib to be able to hold on to the state when adding a proper userspace ABI (character device) further down the road. To achieve this, drivers need a handle at the internal state that is not dependent on their struct gpio_chip() so we add gpiochip_add_data() and gpiochip_get_data() following the pattern of many other subsystems. All the "use gpiochip data pointer" patches transforms drivers to this scheme. - The Generic GPIO chip header has been merged into the general <linux/gpio/driver.h> header, and the custom header for that removed. Instead of having a separate mm_gpio_chip struct for these generic drivers, merge that into struct gpio_chip, simplifying the code and removing the need for separate and confusing includes. Misc improvements: - Stabilize the way GPIOs are looked up from the ACPI legacy specification. - Incremental driver features for PXA, PCA953X, Lantiq (patches from the OpenWRT community), RCAR, Zynq, PL061, 104-idi-48 New drivers: - Add a GPIO chip to the ALSA SoC AC97 driver. - Add a new Broadcom NSP SoC driver (this lands in the pinctrl dir, but the branch is merged here too to account for infrastructural changes). - The sx150x driver now supports the sx1502" * tag 'gpio-v4.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (220 commits) gpio: generic: make bgpio_pdata always visible gpiolib: fix chip order in gpio list gpio: mpc8xxx: Do not use gpiochip_get_data() in mpc8xxx_gpio_save_regs() gpio: mm-lantiq: Do not use gpiochip_get_data() in ltq_mm_save_regs() gpio: brcmstb: Allow building driver for BMIPS_GENERIC gpio: brcmstb: Set endian flags for big-endian MIPS gpio: moxart: fix build regression gpio: xilinx: Do not use gpiochip_get_data() in xgpio_save_regs() leds: pca9532: use gpiochip data pointer leds: tca6507: use gpiochip data pointer hid: cp2112: use gpiochip data pointer bcma: gpio: use gpiochip data pointer avr32: gpio: use gpiochip data pointer video: fbdev: via: use gpiochip data pointer gpio: pch: Optimize pch_gpio_get() Revert "pinctrl: lantiq: Implement gpio_chip.to_irq" pinctrl: nsp-gpio: use gpiochip data pointer pinctrl: vt8500-wmt: use gpiochip data pointer pinctrl: exynos5440: use gpiochip data pointer pinctrl: at91-pio4: use gpiochip data pointer ...
| * gpio: change member .dev to .parentLinus Walleij2015-11-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | Merge branch 'for-linus' of ↵Linus Torvalds2016-01-142-3/+3
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: floppy: make local variable non-static exynos: fixes an incorrect header guard dt-bindings: fixes some incorrect header guards cpufreq-dt: correct dead link in documentation cpufreq: ARM big LITTLE: correct dead link in documentation treewide: Fix typos in printk Documentation: filesystem: Fix typo in fs/eventfd.c fs/super.c: use && instead of & for warn_on condition Documentation: fix sysfs-ptp lib: scatterlist: fix Kconfig description
| * | treewide: Fix typos in printkMasanari Iida2015-12-082-3/+3
| |/ | | | | | | | | | | | | | | | | This patch fix multiple spelling typos found in various part of kernel. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | [media] media framework: rename pads init function to media_entity_pads_init()Mauro Carvalho Chehab2016-01-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With the MC next gen rework, what's left for media_entity_init() is to just initialize the PADs. However, certain devices, like a FLASH led/light doesn't have any input or output PAD. So, there's no reason why calling media_entity_init() would be mandatory. Also, despite its name, what this function actually does is to initialize the PADs data. So, rename it to media_entity_pads_init() in order to reflect that. The media entity actual init happens during entity register, at media_device_register_entity(). We should move init of num_links and num_backlinks to it. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] uapi/media.h: Rename entities types to functionsMauro Carvalho Chehab2016-01-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rename the userspace types from MEDIA_ENT_T_ to MEDIA_ENT_F_ and add the backward compatibility bits. The changes at the .c files was generated by the following coccinelle script: @@ @@ -MEDIA_ENT_T_UNKNOWN +MEDIA_ENT_F_UNKNOWN @@ @@ -MEDIA_ENT_T_DVB_BASE +MEDIA_ENT_F_DVB_BASE @@ @@ -MEDIA_ENT_T_V4L2_BASE +MEDIA_ENT_F_V4L2_BASE @@ @@ -MEDIA_ENT_T_V4L2_SUBDEV_BASE +MEDIA_ENT_F_V4L2_SUBDEV_BASE @@ @@ -MEDIA_ENT_T_CONNECTOR_BASE +MEDIA_ENT_F_CONNECTOR_BASE @@ @@ -MEDIA_ENT_T_V4L2_VIDEO +MEDIA_ENT_F_IO_V4L @@ @@ -MEDIA_ENT_T_V4L2_VBI +MEDIA_ENT_F_IO_VBI @@ @@ -MEDIA_ENT_T_V4L2_SWRADIO +MEDIA_ENT_F_IO_SWRADIO @@ @@ -MEDIA_ENT_T_V4L2_SUBDEV_UNKNOWN +MEDIA_ENT_F_V4L2_SUBDEV_UNKNOWN @@ @@ -MEDIA_ENT_T_CONN_RF +MEDIA_ENT_F_CONN_RF @@ @@ -MEDIA_ENT_T_CONN_SVIDEO +MEDIA_ENT_F_CONN_SVIDEO @@ @@ -MEDIA_ENT_T_CONN_COMPOSITE +MEDIA_ENT_F_CONN_COMPOSITE @@ @@ -MEDIA_ENT_T_CONN_TEST +MEDIA_ENT_F_CONN_TEST @@ @@ -MEDIA_ENT_T_V4L2_SUBDEV_SENSOR +MEDIA_ENT_F_CAM_SENSOR @@ @@ -MEDIA_ENT_T_V4L2_SUBDEV_FLASH +MEDIA_ENT_F_FLASH @@ @@ -MEDIA_ENT_T_V4L2_SUBDEV_LENS +MEDIA_ENT_F_LENS @@ @@ -MEDIA_ENT_T_V4L2_SUBDEV_DECODER +MEDIA_ENT_F_ATV_DECODER @@ @@ -MEDIA_ENT_T_V4L2_SUBDEV_TUNER +MEDIA_ENT_F_TUNER @@ @@ -MEDIA_ENT_T_DVB_DEMOD +MEDIA_ENT_F_DTV_DEMOD @@ @@ -MEDIA_ENT_T_DVB_DEMUX +MEDIA_ENT_F_TS_DEMUX @@ @@ -MEDIA_ENT_T_DVB_TSOUT +MEDIA_ENT_F_IO_DTV @@ @@ -MEDIA_ENT_T_DVB_CA +MEDIA_ENT_F_DTV_CA @@ @@ -MEDIA_ENT_T_DVB_NET_DECAP +MEDIA_ENT_F_DTV_NET_DECAP Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] media-entity.h: rename entity.type to entity.functionMauro Carvalho Chehab2016-01-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Entities should have one or more functions. Calling it as a type proofed to not be correct, as an entity could eventually have more than one type. So, rename the field as function. Please notice that this patch doesn't extend support for multiple function entities. Such change will happen when we have real case drivers using it. No functional changes. Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] media: get rid of unused "extra_links" param on media_entity_init()Mauro Carvalho Chehab2016-01-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, media_entity_init() creates an array with the links, allocated at init time. It provides a parameter (extra_links) that would allocate more links than the current needs, but this is not used by any driver. As we want to be able to do dynamic link allocation/removal, we'll need to change the implementation of the links. So, before doing that, let's first remove that extra unused parameter, in order to cleanup the interface first. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] au0828: Add support for media controllerRafael Lourenço de Lima Chehab2016-01-112-0/+29
| | | | | | | | | | | | | | Add support for analog and dvb tv using media controller. Signed-off-by: Rafael Lourenço de Lima Chehab <chehabrafael@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] rtl2832: do not filter out slave TS null packetsAntti Palosaari2015-12-231-12/+0
| | | | | | | | | | | | | | | | | | Do not remove slave TS NULL padding PID (0x1fff) by default as there is no real need. After that whole TS is passed to kernel sw PID filter. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] rtl2832: print reg number on error caseAntti Palosaari2015-12-231-3/+6
| | | | | | | | | | | | | | | | It is hard to debug possible I2C failures without knowing the possible register itself. Add register number to error printing. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] au8522: Avoid memory leak for device config dataMauro Carvalho Chehab2015-12-214-26/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As reported by kmemleak: unreferenced object 0xffff880321e1da40 (size 32): comm "modprobe", pid 3309, jiffies 4295019569 (age 2359.636s) hex dump (first 32 bytes): 47 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 G............... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff82278c8e>] kmemleak_alloc+0x4e/0xb0 [<ffffffff8153c08c>] kmem_cache_alloc_trace+0x1ec/0x280 [<ffffffffa13a896a>] au8522_probe+0x19a/0xa30 [au8522_decoder] [<ffffffff81de0032>] i2c_device_probe+0x2b2/0x490 [<ffffffff81ca7004>] driver_probe_device+0x454/0xd90 [<ffffffff81ca7c1b>] __device_attach_driver+0x17b/0x230 [<ffffffff81ca15da>] bus_for_each_drv+0x11a/0x1b0 [<ffffffff81ca6a4d>] __device_attach+0x1cd/0x2c0 [<ffffffff81ca7d43>] device_initial_probe+0x13/0x20 [<ffffffff81ca451f>] bus_probe_device+0x1af/0x250 [<ffffffff81c9e0f3>] device_add+0x943/0x13b0 [<ffffffff81c9eb7a>] device_register+0x1a/0x20 [<ffffffff81de8626>] i2c_new_device+0x5d6/0x8f0 [<ffffffffa0d88ea4>] v4l2_i2c_new_subdev_board+0x1e4/0x250 [v4l2_common] [<ffffffffa0d88fe7>] v4l2_i2c_new_subdev+0xd7/0x110 [v4l2_common] [<ffffffffa13b2f76>] au0828_card_analog_fe_setup+0x2e6/0x3f0 [au0828] Checking where the error happens: (gdb) list *au8522_probe+0x19a 0x99a is in au8522_probe (drivers/media/dvb-frontends/au8522_decoder.c:761). 756 printk(KERN_INFO "au8522_decoder attach existing instance.\n"); 757 break; 758 } 759 760 demod_config = kzalloc(sizeof(struct au8522_config), GFP_KERNEL); 761 if (demod_config == NULL) { 762 if (instance == 1) 763 kfree(state); 764 return -ENOMEM; 765 } Shows that the error path is not being handled properly. The are actually several issues here: 1) config free should have been calling hybrid_tuner_release_state() function, by calling au8522_release_state(); 2) config is only allocated at the digital part. On the analog one, it is received from the caller. A complex logic could be added to address it, however, it is simpler to just embeed config inside the state. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] media: videobuf2: Move timestamp to vb2_bufferJunghak Sung2015-12-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Move timestamp from struct vb2_v4l2_buffer to struct vb2_buffer for common use, and change its type to u64 in order to handling y2038 problem. This patch also includes all device drivers' changes related to this restructuring. Signed-off-by: Junghak Sung <jh1009.sung@samsung.com> Signed-off-by: Geunyoung Kim <nenggun.kim@samsung.com> Acked-by: Seung-Woo Kim <sw0312.kim@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] vb2: drop v4l2_format argument from queue_setupHans Verkuil2015-12-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The queue_setup callback has a void pointer that is just for V4L2 and is the pointer to the v4l2_format struct that was passed to VIDIOC_CREATE_BUFS. The idea was that drivers would use the information from that struct to buffers suitable for the requested format. After the vb2 split series this pointer is now a void pointer, which is ugly, and the reality is that all existing drivers will effectively just look at the sizeimage field of v4l2_format. To make this more generic the queue_setup callback is changed: the void pointer is dropped, instead if the *num_planes argument is 0, then use the current format size, if it is non-zero, then it contains the number of requested planes and the sizes array contains the requested sizes. If either is unsupported, then return -EINVAL, otherwise use the requested size(s). Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] use https://linuxtv.org for LinuxTV URLsMauro Carvalho Chehab2015-12-0412-12/+12
| | | | | | | | | | | | | | | | | | | | | | While https was always supported on linuxtv.org, only in Dec 3 2015 the website is using valid certificates. As we're planning to drop pure http support on some future, change all references at the media subsystem to point to the https URL instead. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] tda10071: Fix dependency to REGMAP_I2CMatthias Schwarzott2015-12-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | Without I get this error for by dvb-card: tda10071: Unknown symbol devm_regmap_init_i2c (err 0) cx23885_dvb_register() dvb_register failed err = -22 cx23885_dev_setup() Failed to register dvb adapters on VID_B Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] si2165: Add DVB-C support for HVR-4400/HVR-5500Matthias Schwarzott2015-12-031-5/+81
| | | | | | | | | | | | | | | | | | It works only for HVR-4400/HVR-5500. For WinTV-HVR-930C-HD it fails with bad/no reception for unknown reasons. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] si2165: Prepare si2165_set_frontend() for future DVB-C supportMatthias Schwarzott2015-12-031-14/+37
| | | | | | | | | | | | | | | | The current si2165_set_frontend() function actually works only for DVB-T. Split it into two functions, preparing the code to support DVB-C. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] si2165: set list of DVB-T registers togetherMatthias Schwarzott2015-12-031-47/+26
| | | | | | | | | | | | | | Use si2165_write_reg_list() to do the DVB-T mode initialization altogether. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] si2165: Simplify si2165_set_if_freq_shift usageMatthias Schwarzott2015-12-031-13/+13
| | | | | | | | | | | | | | | | | | si2165_set_if_freq_shift() needs to call get_if_frequency() in order to do the right shift. Add such logic inside the function, simplifying the logic for the callers. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] si2165: move setting ts config to initMatthias Schwarzott2015-12-031-13/+14
| | | | | | | | | | | | | | The TS config is fixed, so no need to write it for each tune. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] si2165: only write agc registers after reset before start_syncroMatthias Schwarzott2015-12-031-17/+15
| | | | | | | | | | | | | | | | Datasheet says they must be rewritten after reset. But it only makes sense to write them when trying to tune afterwards. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] si2165: create function si2165_write_reg_list for writing register listsMatthias Schwarzott2015-12-031-0/+21
| | | | | | | | | | | | | | | | It is common the need of writing a table of values. Add a function to provide a helper to address such case. This will allow further code cleanups. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] si2165: rename si2165_set_parameters to si2165_set_frontendMatthias Schwarzott2015-12-031-2/+2
| | | | | | | | | | | | | | No functional changes. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] si2165: rename frontend -> feMatthias Schwarzott2015-12-031-9/+9
| | | | | | | | | | | | | | No functional changes. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] si2165: fix checkpatch issuesMatthias Schwarzott2015-11-191-30/+39
| | | | | | | | | | Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] stb6100: get rid of get_state()/set_state()Mauro Carvalho Chehab2015-11-173-72/+54
| | | | | | | | | | | | | | | | | | | | | | It is tricky to get rid of those ops here, as the stv0299 driver wants to set frequency in separate from setting the bandwidth. So, we use a small trick: we temporarely fill the cache with 0 for either frequency or bandwidth and add some logic at set_params to only change the property(ies) that aren't zero. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] tda6655: get rid of get_state()/set_state()Mauro Carvalho Chehab2015-11-171-36/+0
| | | | | | | | | | | | | | | | | | | | Those ops aren't used by any driver, with is weird. I suspect that mantis_vb3030 driver were not working properly... Anyway, now that the driver uses the set_parms, the DVB frontend core should do the right thing. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] tda8261: don't use set_state/get_state callbacksMauro Carvalho Chehab2015-11-172-99/+63
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Those callbacks are meant to be used only on some very specific cases. There's absolutely no need to do that at tda8261, as the only parameter that it allows to be set/get is the frequency. So, use the standard get_params() and get_frequency() kABI ops. There's no need to touch at any bridge driver, as all interactions are done via the macros at tda8261_cfg.h. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] tda666x: add support for set_parms() and get_frequency()Mauro Carvalho Chehab2015-11-171-0/+20
| | | | | | | | | | | | | | | | | | Those two callbacks are the ones that should be used by normal DVB frontend drivers. Add support for them. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] tda665x: split set_frequency from set_stateMauro Carvalho Chehab2015-11-171-76/+85
| | | | | | | | | | | | | | | | | | On tda665x, set_state only sets frequency. As the kABI for set_state is meant to be used only on special cases, split the function into two, in order to allow it to be latter used by a DVBv5 cache params logic. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] stb6100: get rid of tuner_state at struct stb6100_stateMauro Carvalho Chehab2015-11-172-6/+4
| | | | | | | | | | | | | | | | | | | | | | The stb6100 driver has a struct tuner_state on its state struct, that it is used only to store the bandwidth. Even so, this struct is not really used, as every time the bandwidth is get or set, it goes through the hardware. So, get rid of that. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] dvb_frontend.h: get rid of unused tuner params/statesMauro Carvalho Chehab2015-11-171-17/+6
|/ | | | | | | | | | | | | | | | | | | | There are several tuner_param values that aren't by any driver or core: DVBFE_TUNER_TUNERSTEP DVBFE_TUNER_IFFREQ DVBFE_TUNER_REFCLOCK DVBFE_TUNER_IQSENSE DVBFE_TUNER_DUMMY Several of those correspond to the values at the tuner_state struct with is also only initialized by not used anyware: u32 tunerstep; u32 ifreq; u32 refclock; It doesn't make sense to keep anything at the kABI that it is not used. So, get rid of them. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* Merge tag 'media/v4.4-1' of ↵Linus Torvalds2015-11-052-12/+14
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: "Media updates, including: - Lots of improvements at the kABI documentation - Split of Videobuf2 into a common part and a V4L2 specific one - Split of the VB2 tracing events into a separate header file - s5p-mfc got support for Exynos 5433 - v4l2 fixes for 64-bits alignment when running 32 bits userspace on ARM - Added support for SDR radio transmitter at core, vivid and hackrf drivers - Some y2038 fixups - Some improvements at V4L2 colorspace support - saa7164 converted to use the V4L2 core control framework - several new boards additions, cleanups and fixups PS: There are two patches for scripts/kernel-doc that are needed by the documentation patches on Media. Jon is OK on merging those via my tree" * tag 'media/v4.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (146 commits) [media] c8sectpfe: Remove select on CONFIG_FW_LOADER_USER_HELPER_FALLBACK [media] DocBook media: update copyright/version numbers [media] ivtv: Convert to get_user_pages_unlocked() [media] media/v4l2-ctrls: fix setting autocluster to manual with VIDIOC_S_CTRL [media] DocBook media: Fix a typo in encoder cmd [media] DocBook: add SDR specific info to G_MODULATOR / S_MODULATOR [media] DocBook: add SDR specific info to G_TUNER / S_TUNER [media] hackrf: do not set human readable name for formats [media] hackrf: add support for transmitter [media] hackrf: switch to single function which configures everything [media] hackrf: add control for RF amplifier [media] DocBook: add modulator type field [media] v4l: add type field to v4l2_modulator struct [media] DocBook: document SDR transmitter [media] v4l2: add support for SDR transmitter [media] DocBook: document tuner RF gain control [media] v4l2: add RF gain control [media] v4l2: rename V4L2_TUNER_ADC to V4L2_TUNER_SDR [media] media/vivid-osd: fix info leak in ioctl [media] media: videobuf2: Move v4l2-specific stuff to videobuf2-v4l2 ...
| * [media] media: videobuf2: Change queue_setup argumentJunghak Sung2015-10-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace struct v4l2_format * with void * to make queue_setup() for common use. And then, modify all device drivers related with this change. Signed-off-by: Junghak Sung <jh1009.sung@samsung.com> Signed-off-by: Geunyoung Kim <nenggun.kim@samsung.com> Acked-by: Seung-Woo Kim <sw0312.kim@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> [hans.verkuil@cisco.com: fix missing const in fimc-lite.c] Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
| * [media] drxd: use kzalloc in drxd_attach()Rasmus Villemoes2015-10-031-2/+1
| | | | | | | | | | | | | | | | This saves a little .text and removes the sizeof(...) style inconsistency. Use sizeof(*state) in accordance with CodingStyle. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
| * [media] media: videobuf2: Restructure vb2_bufferJunghak Sung2015-10-011-9/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove v4l2 stuff - v4l2_buf, v4l2_plane - from struct vb2_buffer. Add new member variables - bytesused, length, offset, userptr, fd, data_offset - to struct vb2_plane in order to cover all information of v4l2_plane. struct vb2_plane { <snip> unsigned int bytesused; unsigned int length; union { unsigned int offset; unsigned long userptr; int fd; } m; unsigned int data_offset; } Replace v4l2_buf with new member variables - index, type, memory - which are common fields for buffer management. struct vb2_buffer { <snip> unsigned int index; unsigned int type; unsigned int memory; unsigned int num_planes; struct vb2_plane planes[VIDEO_MAX_PLANES]; <snip> }; v4l2 specific fields - flags, field, timestamp, timecode, sequence - are moved to vb2_v4l2_buffer in videobuf2-v4l2.c struct vb2_v4l2_buffer { struct vb2_buffer vb2_buf; __u32 flags; __u32 field; struct timeval timestamp; struct v4l2_timecode timecode; __u32 sequence; }; Signed-off-by: Junghak Sung <jh1009.sung@samsung.com> Signed-off-by: Geunyoung Kim <nenggun.kim@samsung.com> Acked-by: Seung-Woo Kim <sw0312.kim@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] m88ds3103: use own reg update_bits() implementationAntti Palosaari2015-10-221-26/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Device stopped to tuning some channels after regmap conversion. Reason is that regmap_update_bits() works a bit differently for partially volatile registers than old homemade routine. Return back to old routine in order to fix issue. Fixes: 478932b16052f5ded74685d096ae920cd17d6424 Cc: <stable@kernel.org> # 4.2+ Reported-by: Mark Clarkstone <hello@markclarkstone.co.uk> Tested-by: Mark Clarkstone <hello@markclarkstone.co.uk> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] si2168: Bounds check firmwareLaura Abbott2015-10-221-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When reading the firmware and sending commands, the length must be bounds checked to avoid overrunning the size of the command buffer and smashing the stack if the firmware is not in the expected format: si2168 11-0064: found a 'Silicon Labs Si2168-B40' si2168 11-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw' si2168 11-0064: firmware download failed -95 Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffffffa085708f Add the proper check. Cc: stable@kernel.org Reported-by: Stuart Auchterlonie <sauchter@redhat.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Laura Abbott <labbott@fedoraproject.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* | [media] lnbh25: Fix lnbh25_attach() function return typeJavier Martinez Canillas2015-10-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | If CONFIG_DVB_LNBH25 is disabled, a stub static inline function is defined that just prints a warning about the driver being disabled but the function return type was wrong which caused a build error. Fixes: e025273b86fb ("[media] lnbh25: LNBH25 SEC controller driver") Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
* | [media] horus3a: Fix horus3a_attach() function parametersJavier Martinez Canillas2015-10-221-2/+2
|/ | | | | | | | | | | If CONFIG_DVB_HORUS3A is disabled a stub static inline function is defined that just prints a warning about the driver being disabled but the function parameters were wrong which caused a build error. Fixes: a5d32b358254f ("[media] horus3a: Sony Horus3A DVB-S/S2 tuner driver") Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
* Merge tag 'media/v4.3-1' of ↵Linus Torvalds2015-09-0529-762/+4626
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - new DVB frontend drivers: ascot2e, cxd2841er, horus3a, lnbh25 - new HDMI capture driver: tc358743 - new driver for NetUP DVB new boards (netup_unidvb) - IR support for DVBSky cards (smipcie-ir) - Coda driver has gain macroblock tiling support - Renesas R-Car gains JPEG codec driver - new DVB platform driver for STi boards: c8sectpfe - added documentation for the media core kABI to device-drivers DocBook - lots of driver fixups, cleanups and improvements * tag 'media/v4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (297 commits) [media] c8sectpfe: Remove select on undefined LIBELF_32 [media] i2c: fix platform_no_drv_owner.cocci warnings [media] cx231xx: Use wake_up_interruptible() instead of wake_up_interruptible_nr() [media] tc358743: only queue subdev notifications if devnode is set [media] tc358743: add missing Kconfig dependency/select [media] c8sectpfe: Use %pad to print 'dma_addr_t' [media] DocBook media: Fix typo "the the" in xml files [media] tc358743: make reset gpio optional [media] tc358743: set direction of reset gpio using devm_gpiod_get [media] dvbdev: document most of the functions/data structs [media] dvb_frontend.h: document the struct dvb_frontend [media] dvb-frontend.h: document struct dtv_frontend_properties [media] dvb-frontend.h: document struct dvb_frontend_ops [media] dvb: Use DVBFE_ALGO_HW where applicable [media] dvb_frontend.h: document struct analog_demod_ops [media] dvb_frontend.h: Document struct dvb_tuner_ops [media] Docbook: Document struct analog_parameters [media] dvb_frontend.h: get rid of dvbfe_modcod [media] add documentation for struct dvb_tuner_info [media] dvb_frontend: document dvb_frontend_tune_settings ...
| * [media] dvb: Use DVBFE_ALGO_HW where applicableMauro Carvalho Chehab2015-08-222-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The dvb_frontend.c core defines a FE_ALGO_HW symbol that it is never used. Also, both cx24123 returns 1 to get_algo() callback instead of using DVBFE_ALGO_HW. Probably, those are some left overs from some code cleanup. Let's stop returning magic numbers and use the proper macro value. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Jonathan Corbet <corbet@lwn.net>
| * [media] horus3a: fix compiler warningHans Verkuil2015-08-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Shut up this compiler warning that I get during the daily build: horus3a.c: In function 'horus3a_set_params': horus3a.c:308:24: warning: 'rolloff' may be used uninitialized in this function [-Wmaybe-uninitialized] symbol_rate * (100 + rolloff), 200000) + 5; ^ Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
| * [media] tda10071: use div_s64() when dividing a s64 integerMauro Carvalho Chehab2015-08-111-1/+1
| | | | | | | | | | | | Otherwise, it will break on 32 bits archs. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
| * [media] dvb-pll: Convert struct dvb_pll_desc uses to constJoe Perches2015-08-111-25/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert the struct dvb_pll_desc uses to const and change the "entries" fixed array size from 12 to [] It saves a couple KB overall and remove ~5KB of data. $ size drivers/media/dvb-frontends/dvb-pll.o* text data bss dec hex filename 8520 1552 2120 12192 2fa0 drivers/media/dvb-frontends/dvb-pll.o.new 5624 6363 2120 14107 371b drivers/media/dvb-frontends/dvb-pll.o.old [PG] Patch taken from https://lkml.org/lkml/2015/6/24/721 with commit message updated. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Reviewed-by: Michael Ira Krufky <m.krufky@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
| * [media] stv0367: Add support for 16Mhz reference clockPeter Griffin2015-08-111-0/+5
| | | | | | | | | | | | | | | | | | | | The B2100A dvb NIM card from ST has 2x stv0367 demodulators and 2x TDA18212 silicon tuners, with a 16Mhz crystal. To get this working properly with the upstream driver we need to add support for the 16Mhz reference clock. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
| * [media] stv0367: Refine i2c error trace to include i2c addressPeter Griffin2015-08-111-4/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When using stv0367 demodulator with STi STB platforms, we can have easily have four or more stv0367 demods running in the system at one time. As typically the b2120 reference design ships with a b2004a daughter board, which can accept two dvb NIM cards, and each b2100A NIM has 2x stv0367 demods and 2x NXPs tuner on it. In such circumstances it is useful to print the i2c address on error messages to know which one is failing due to I2C issues. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
| * [media] ascot2e: don't use variable length arraysMauro Carvalho Chehab2015-08-111-2/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Linux stack is short; we need to be able to count the number of bytes used at stack on each function. So, we don't like to use variable-length arrays, as complained by smatch: drivers/media/dvb-frontends/horus3a.c:57:19: warning: Variable length array is used. The max usecase of the driver seems to be 10 bytes + 1 for the register. So, let's be safe and allocate 11 bytes for the write buffer. This should be enough to cover all cases. If not, let's print an error message. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
OpenPOWER on IntegriCloud