summaryrefslogtreecommitdiffstats
path: root/drivers/media/dvb-frontends/Kconfig
Commit message (Collapse)AuthorAgeFilesLines
* [media] dvb-frontends/Kconfig: better describe Toshiba TC90522ほち2014-11-031-1/+4
| | | | | | | Toshiba TC90522 is wrongly categorized, fix it Signed-off-by: ほち, AreMa Inc <knightrider@are.ma> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] tc90522: add driver for Toshiba TC90522 quad demodulatorAkihiro Tsukada2014-09-231-0/+8
| | | | | | | | | | | | | | | | | | This patch adds driver for tc90522 demodulator chips. The chip contains 4 demod modules that run in parallel and are independently controllable via separate I2C addresses. Two of the modules are for ISDB-T and the rest for ISDB-S. It is used in earthsoft pt3 cards. Note that this driver does not init the chip, because the initilization sequence / register setting is not disclosed. Thus, the driver assumes that the chips are initilized externally by its parent board driver before fe->ops->init() are called. Earthsoft PT3 PCIe card, for example, contains the init sequence in its private memory and provides a command to trigger the sequence. Signed-off-by: Akihiro Tsukada <tskd08@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
* [media] sp2: Add I2C driver for CIMaX SP2 common interface moduleOlli Salonen2014-09-021-0/+7
| | | | | | | | | | | | | | | | | | | Driver for the CIMaX SP2 common interface chip. It is very much based on the existing cimax2 driver for cx23885, but should be more reusable. The product has been sold with name Atmel T90FJR as well and the data sheets for that chip seem to be publicly available. It seems that the USB device that I have and the cx23885 based devices will need to interact differently with the chip for the CAM operations. Thus there is one callback function that is passed on to the sp2 driver (see function sp2_ci_op_cam for that one). IRQ functionality is not included currently (not needed by USB devices and I don't have a PCIe device for development). Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
* [media] as102-fe: make it an independent driverMauro Carvalho Chehab2014-08-211-0/+5
| | | | | | | Move as102-fe to dvb-frontends directory and make it an independent driver. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
* [media] si2165: Add demod driver for DVB-T onlyMatthias Schwarzott2014-07-271-0/+9
| | | | | | | | | | | | DVB-T was tested with 8MHz BW channels in germany This driver is the simplest possible, it uses automatic mode for all parameters (TPS). Added spectrum inversion support. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Tested-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
* [media] Kconfig: rtl2832_sdr must depend on USBAntti Palosaari2014-07-251-1/+1
| | | | | | | | | | | | | | Fixes error: [next:master 7435/8702] ERROR: "usb_alloc_urb [drivers/media/dvb-frontends/rtl2832_sdr.ko] undefined! rtl2832_sdr driver implements own USB streaming for SDR data. Logically that functionality belongs to USB interface driver, but currently it is implemented here. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
* [media] rtl2832_sdr: fix Kconfig dependenciesAntti Palosaari2014-07-221-1/+1
| | | | | | | | MEDIA_SDR_SUPPORT and I2C_MUX are needed for rtl2832_sdr. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
* rtl2832_sdr: move from staging to mediaAntti Palosaari2014-07-211-0/+9
| | | | | | | Move rtl2832_sdr driver module from staging to media. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
* [media] si2168: Silicon Labs Si2168 DVB-T/T2/C demod driverAntti Palosaari2014-04-231-0/+7
| | | | | | | | Silicon Labs Si2168 DVB-T/T2/C demod driver. That driver version supports only DVB-T. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
* [media] rtl2832: provide muxed I2C adapterAntti Palosaari2014-03-051-1/+1
| | | | | | | | RTL2832 provides gated / repeater I2C adapter for tuner. Implement it as a muxed I2C adapter. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
* [media] drx-j: add a driver for Trident drx-j frontendDevin Heitmueller2014-03-041-0/+2
| | | | | | | | | | | | | | | | | Add support for the Trident DRX-J driver, including a card profile for the PCTV 80e which uses the chip. Thanks to Trident for allowing the release of this code under a BSD license, and of course Hauppauge/PCTV for pushing for its release to the community. [pdickeybeta@gmail.com: modified to fix compilation errors and also to move the driver files from the drx39xy subdirectory to the frontends directory] [m.chehab@samsung.com: fix merge conflicts, commented drx-j compilation and added EM28XX_R06_I2C_CLK setup also to the board setup] Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
* [media] it913x-fe: Dead code remove driverMalcolm Priestley2014-02-241-8/+0
| | | | | | | This driver has been replaced by af9033 and tuner_it913x Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
* [media] m88ds3103: use I2C mux for tuner I2C adapterAntti Palosaari2013-12-191-1/+1
| | | | | | | | | | | | | | Switch standard I2C adapter to muxed I2C adapter. David reported that I2C adapter implementation caused deadlock. I discussed with Jean and he suggested to implement it as a multiplexed i2c adapter because tuner I2C bus could be seen like own I2C segment. Reported-by: David Howells <dhowells@redhat.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
* [media] Montage M88DS3103 DVB-S/S2 demodulator driverAntti Palosaari2013-12-191-0/+7
| | | | | | | DVB-S/S2 satellite television demodulator driver. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
* [media] dvb: add cx24117 frontendLuis Alves2013-10-031-0/+7
| | | | | | | | | Add support for the cx24117 dual DVB-S/S2 frontend. Signed-off-by: Luis Alves <ljalvs@gmail.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
* [media] ts2020: use customise option correctlyPaul Bolle2013-03-211-1/+1
| | | | | | | | | | The Kconfig entry for "TS2020 based tuners" defaults to modular if DVB_FE_CUSTOMISE is set. But that Kconfig symbol was replaced with MEDIA_SUBDRV_AUTOSELECT as of v3.7. So use the new symbol. And negate the logic, so we are in line with all the similar entries in this file. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] ts2020: add ts2020 tuner driverKonstantin Dimitrov2012-12-271-0/+7
| | | | | | | add separate ts2020 tuner driver Signed-off-by: Konstantin Dimitrov <kosio.dimitrov@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] Kconfig: merge all customise options into just oneMauro Carvalho Chehab2012-08-211-105/+90
| | | | | | | | | | | | | | | | Instead of having 3 options to allow customizing the media sub-drivers (tuners, I2C drivers, frontends), merge all of them into just one. That simplifies the life for users, as they can just keep this untouched. Life for developers is also simpler, as there's now just one Kconfig item to remember, for the ancillary sub-drivers providing supports for chips that could change from one board design to another. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* [media] move the dvb/frontends to drivers/media/dvb-frontendsMauro Carvalho Chehab2012-08-131-0/+756
Raise the DVB frontends one level up, as the intention is to remove the drivers/media/dvb directory. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
OpenPOWER on IntegriCloud