summaryrefslogtreecommitdiffstats
path: root/drivers/md/linear.c
Commit message (Collapse)AuthorAgeFilesLines
* md: report device as congested when suspendedNeilBrown2009-09-231-0/+3
| | | | | | | This should writeback from coming when the device is temporarily suspended. Signed-off-by: NeilBrown <neilb@suse.de>
* bio: first step in sanitizing the bio->bi_rw flag testingJens Axboe2009-09-111-1/+1
| | | | | | | | Get rid of any functions that test for these bits and make callers use bio_rw_flagged() directly. Then it is at least directly apparent what variable and flag they check. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* md: Use revalidate_disk to effect changes in size of device.NeilBrown2009-08-031-0/+1
| | | | | | | | | | | | As revalidate_disk calls check_disk_size_change, it will cause any capacity change of a gendisk to be propagated to the blockdev inode. So use that instead of mucking about with locks and i_size_write. Also add a call to revalidate_disk in do_md_run and a few other places where the gendisk capacity is changed. Signed-off-by: NeilBrown <neilb@suse.de>
* md: Push down data integrity code to personalities.Andre Noll2009-08-031-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | This patch replaces md_integrity_check() by two new public functions: md_integrity_register() and md_integrity_add_rdev() which are both personality-independent. md_integrity_register() is called from the ->run and ->hot_remove methods of all personalities that support data integrity. The function iterates over the component devices of the array and determines if all active devices are integrity capable and if their profiles match. If this is the case, the common profile is registered for the mddev via blk_integrity_register(). The second new function, md_integrity_add_rdev() is called from the ->hot_add_disk methods, i.e. whenever a new device is being added to a raid array. If the new device does not support data integrity, or has a profile different from the one already registered, data integrity for the mddev is disabled. For raid0 and linear, only the call to md_integrity_register() from the ->run method is necessary. Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
* md: Use new topology calls to indicate alignment and I/O sizesMartin K. Petersen2009-07-011-2/+2
| | | | | | | | | | | Switch MD over to the new disk_stack_limits() function which checks for aligment and adjusts preferred I/O sizes when stacking. Also indicate preferred I/O sizes where applicable. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de>
* md/linear: use call_rcu to free obsolete 'conf' structures.NeilBrown2009-06-181-8/+13
| | | | | | | | | | | | Current, when we update the 'conf' structure, when adding a drive to a linear array, we keep the old version around until the array is finally stopped, as it is not safe to free it immediately. Now that we have rcu protection on all accesses to 'conf', we can use call_rcu to free it more promptly. Signed-off-by: NeilBrown <neilb@suse.de>
* md linear: Protecting mddev with rcu locks to avoid racesSandeepKsinha2009-06-181-9/+38
| | | | | | | | | | | | | | | Due to the lack of memory ordering guarantees, we may have races around mddev->conf. In particular, the correct contents of the structure we get from dereferencing ->private might not be visible to this CPU yet, and they might not be correct w.r.t mddev->raid_disks. This patch addresses the problem using rcu protection to avoid such race conditions. Signed-off-by: SandeepKsinha <sandeepksinha@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
* md: Move check for bitmap presence to personality code.Andre Noll2009-06-181-0/+2
| | | | | | | | | | | | | | | | | | | | | | | If the superblock of a component device indicates the presence of a bitmap but the corresponding raid personality does not support bitmaps (raid0, linear, multipath, faulty), then something is seriously wrong and we'd better refuse to run such an array. Currently, this check is performed while the superblocks are examined, i.e. before entering personality code. Therefore the generic md layer must know which raid levels support bitmaps and which do not. This patch avoids this layer violation without adding identical code to various personalities. This is accomplished by introducing a new public function to md.c, md_check_no_bitmap(), which replaces the hard-coded checks in the superblock loading functions. A call to md_check_no_bitmap() is added to the ->run method of each personality which does not support bitmaps and assembly is aborted if at least one component device contains a bitmap. Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
* md: raid0/linear: ensure device sizes are rounded to chunk size.NeilBrown2009-06-181-0/+6
| | | | | | | | | This is currently ensured by common code, but it is more reliable to ensure it where it is needed in personality code. All the other personalities that care already round the size to the chunk_size. raid0 and linear are the only hold-outs. Signed-off-by: NeilBrown <neilb@suse.de>
* md: Make mddev->chunk_size sector-based.Andre Noll2009-06-181-1/+1
| | | | | | | | | | | | | This patch renames the chunk_size field to chunk_sectors with the implied change of semantics. Since is_power_of_2(chunk_size) = is_power_of_2(chunk_sectors << 9) = is_power_of_2(chunk_sectors) these bits don't need an adjustment for the shift. Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
* md: Binary search in linear raidSandeep K Sinha2009-06-161-5/+17
| | | | | | | Replace the linear search with binary search in which_dev. Signed-off-by: Sandeep K Sinha <sandeepksinha@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
* md: Removing num_sector and replacing start_sector with end_sectorSandeep K Sinha2009-06-161-19/+18
| | | | | | | | Remove num_sectors from dev_info and replace start_sector with end_sector. This makes a lot of comparisons much simpler. Signed-off-by: Sandeep K Sinha <sandeepksinha@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
* md: Removal of hash table in linear raidSandeep K Sinha2009-06-161-90/+3
| | | | | | | | | | | | Get rid of sector_div and hash table for linear raid and replace with a linear search in which_dev. The hash table adds a lot of complexity for little if any gain. Ultimately a binary search will be used which will have smaller cache foot print, a similar number of memory access, and no divisions. Signed-off-by: Sandeep K Sinha <sandeepksinha@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
* md: remove mddev_to_conf "helper" macroNeilBrown2009-06-161-6/+6
| | | | | | | | | | Having a macro just to cast a void* isn't really helpful. I would must rather see that we are simply de-referencing ->private, than have to know what the macro does. So open code the macro everywhere and remove the pointless cast. Signed-off-by: NeilBrown <neilb@suse.de>
* block: Use accessor functions for queue limitsMartin K. Petersen2009-05-221-1/+1
| | | | | | | | Convert all external users of queue limits to using wrapper functions instead of poking the request queue variables directly. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* md: centralize ->array_sectors modificationsDan Williams2009-03-311-2/+2
| | | | | | | | | Get personalities out of the business of directly modifying ->array_sectors. Lays groundwork to introduce policy on when ->array_sectors can be modified. Reviewed-by: Andre Noll <maan@systemlinux.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* md: add 'size' as a personality methodDan Williams2009-03-311-2/+13
| | | | | | | | | | | | | In preparation for giving userspace control over ->array_sectors we need to be able to retrieve the 'default' size, and the 'anticipated' size when a reshape is requested. For personalities that do not reshape emit a warning if anything but the default size is requested. In the raid5 case we need to update ->previous_raid_disks to make the new 'default' size available. Reviewed-by: Andre Noll <maan@systemlinux.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* md: Represent raid device size in sectors.Andre Noll2009-03-311-2/+2
| | | | | | | | | | | | This patch renames the "size" field of struct mdk_rdev_s to "sectors" and changes this field to store sectors instead of blocks. All users of this field, linear.c, raid0.c and md.c, are fixed up accordingly which gets rid of many multiplications and divisions. Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
* md: move md_k.h from include/linux/raid/ to drivers/md/NeilBrown2009-03-311-1/+1
| | | | | | It really is nicer to keep related code together.. Signed-off-by: NeilBrown <neilb@suse.de>
* md: move lots of #include lines out of .h files and into .cNeilBrown2009-03-311-0/+4
| | | | | | | | | | This makes the includes more explicit, and is preparation for moving md_k.h to drivers/md/md.h Remove include/raid/md.h as its only remaining use was to #include other files. Signed-off-by: NeilBrown <neilb@suse.de>
* md: move headers out of include/linux/raid/Christoph Hellwig2009-03-311-1/+1
| | | | | | | | | | Move the headers with the local structures for the disciplines and bitmap.h into drivers/md/ so that they are more easily grepable for hacking and not far away. md.h is left where it is for now as there are some uses from the outside. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: NeilBrown <neilb@suse.de>
* md: Fix a bug in linear.c causing which_dev() to return the wrong device.Andre Noll2009-02-061-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ab5bd5cbc8d4b868378d062eed3d4240930fbb86 introduced the following bug in linear software raid for large arrays on 32 bit machines: which_dev() computes the device holding a given sector by shifting down the sector number to a 32 bit range, dividing by the array spacing and looking up the resulting index in the hash table of the array. Because the computed index might be slightly too small, a loop at the end of which_dev() increases the index until the given sector actually falls into the range of the device associated with that index. The changes of the above mentioned commit caused this loop to check whether the _index_ rather than the sector number is small enough, effectively bypassing the loop and thus possibly returning the wrong device. As reported by Simon Kirby, this leads to errors such as linear_make_request: Sector 2340486136 out of bounds on dev sdi: 156301312 sectors, offset 2109870464 Fix this bug by introducing a local variable for the index so that the variable containing the passed sector is left unchanged. Cc: stable@kernel.org Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
* md: use list_for_each_entry macro directlyCheng Renquan2009-01-091-2/+1
| | | | | | | | | | | | | | | | | The rdev_for_each macro defined in <linux/raid/md_k.h> is identical to list_for_each_entry_safe, from <linux/list.h>, it should be defined to use list_for_each_entry_safe, instead of reinventing the wheel. But some calls to each_entry_safe don't really need a safe version, just a direct list_for_each_entry is enough, this could save a temp variable (tmp) in every function that used rdev_for_each. In this patch, most rdev_for_each loops are replaced by list_for_each_entry, totally save many tmp vars; and only in the other situations that will call list_del to delete an entry, the safe version is used. Signed-off-by: Cheng Renquan <crquan@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>
* md: linear: Fix a division by zero bug for very small arrays.Andre Noll2008-11-061-0/+2
| | | | | | | | | | | | | | | | | | We currently oops with a divide error on starting a linear software raid array consisting of at least two very small (< 500K) devices. The bug is caused by the calculation of the hash table size which tries to compute sector_div(sz, base) with "base" being zero due to the small size of the component devices of the array. Fix this by requiring the hash spacing to be at least one which implies that also "base" is non-zero. This bug has existed since about 2.6.14. Cc: stable@kernel.org Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
* md: Remove unnecessary #includes, #defines, and function declarations.NeilBrown2008-10-131-8/+0
| | | | | | A lot of cruft has gathered over the years. Time to remove it. Signed-off-by: NeilBrown <neilb@suse.de>
* md: Convert remaining 1k representations in linear.c to sectors.Andre Noll2008-10-131-18/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch renames hash_spacing and preshift to spacing and sector_shift respectively with the following change of semantics: Case 1: (sizeof(sector_t) <= sizeof(u32)). ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In this case, we have sector_shift = preshift = 0 and spacing = 2 * hash_spacing. Hence, the index for the hash table which is computed by the new code in which_dev() as sector / spacing equals the old value which was (sector/2) / hash_spacing. Note also that the value of nb_zone stays the same because both sz and base double. Case 2: (sizeof(sector_t) > sizeof(u32)). ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ (aka the shifting dance case). Here we have sector_shift = preshift + 1 and spacing = 2 * hash_spacing during the computation of nb_zone and curr_sector, but spacing = hash_spacing in which_dev() because in the last hunk of the patch for linear.c we shift down conf->spacing (= 2 * hash_spacing) by one more bit than in the old code. Hence in the computation of nb_zone, sz and base have the same value as before, so nb_zone is not affected. Also curr_sector in the next hunk stays the same. In which_dev() the hash table index is computed as (sector >> sector_shift) / spacing In view of sector_shift = preshift + 1 and spacing = hash_spacing, this equals ((sector/2) >> preshift) / hash_spacing which is the value computed by the old code. Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
* md: linear.c: Make two local variables sector-based.Andre Noll2008-10-131-10/+10
| | | | | | | | This is a preparation for representing also the remaining fields of struct linear_private_data as sectors. Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
* md: linear: Represent dev_info->size and dev_info->offset in sectors.Andre Noll2008-10-131-25/+29
| | | | | | | Rename them to num_sectors and start_sector which is more descriptive. Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
* md: linear.c: Remove broken debug code.Andre Noll2008-10-131-23/+0
| | | | | | | conf->smallest_size is undefined since day one of the git repo.. Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
* md: linear.c: Remove pointless initialization of curr_offset.Andre Noll2008-10-131-1/+0
| | | | | Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
* md: linear.c: Fix typo in comment.Andre Noll2008-10-131-1/+1
| | | | | Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
* block: mark bio_split_pool staticDenis ChengRq2008-10-091-1/+1
| | | | | | | | | | | Since all bio_split calls refer the same single bio_split_pool, the bio_split function can use bio_split_pool directly instead of the mempool_t parameter; then the mempool_t parameter can be removed from bio_split param list, and bio_split_pool is only referred in fs/bio.c file, can be marked static. Signed-off-by: Denis ChengRq <crquan@gmail.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* block: move stats from disk to part0Tejun Heo2008-10-091-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move stats related fields - stamp, in_flight, dkstats - from disk to part0 and unify stat handling such that... * part_stat_*() now updates part0 together if the specified partition is not part0. ie. part_stat_*() are now essentially all_stat_*(). * {disk|all}_stat_*() are gone. * part_round_stats() is updated similary. It handles part0 stats automatically and disk_round_stats() is killed. * part_{inc|dec}_in_fligh() is implemented which automatically updates part0 stats for parts other than part0. * disk_map_sector_rcu() is updated to return part0 if no part matches. Combined with the above changes, this makes NULL special case handling in callers unnecessary. * Separate stats show code paths for disk are collapsed into part stats show code paths. * Rename disk_stat_lock/unlock() to part_stat_lock/unlock() While at it, reposition stat handling macros a bit and add missing parentheses around macro parameters. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* block: fix diskstats accessTejun Heo2008-10-091-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are two variants of stat functions - ones prefixed with double underbars which don't care about preemption and ones without which disable preemption before manipulating per-cpu counters. It's unclear whether the underbarred ones assume that preemtion is disabled on entry as some callers don't do that. This patch unifies diskstats access by implementing disk_stat_lock() and disk_stat_unlock() which take care of both RCU (for partition access) and preemption (for per-cpu counter access). diskstats access should always be enclosed between the two functions. As such, there's no need for the versions which disables preemption. They're removed and double underbars ones are renamed to drop the underbars. As an extra argument is added, there's no danger of using the old version unconverted. disk_stat_lock() uses get_cpu() and returns the cpu index and all diskstat functions which access per-cpu counters now has @cpu argument to help RT. This change adds RCU or preemption operations at some places but also collapses several preemption ops into one at others. Overall, the performance difference should be negligible as all involved ops are very lightweight per-cpu ones. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* Merge branch 'for-linus' of git://neil.brown.name/mdLinus Torvalds2008-07-211-10/+10
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of git://neil.brown.name/md: (52 commits) md: Protect access to mddev->disks list using RCU md: only count actual openers as access which prevent a 'stop' md: linear: Make array_size sector-based and rename it to array_sectors. md: Make mddev->array_size sector-based. md: Make super_type->rdev_size_change() take sector-based sizes. md: Fix check for overlapping devices. md: Tidy up rdev_size_store a bit: md: Remove some unused macros. md: Turn rdev->sb_offset into a sector-based quantity. md: Make calc_dev_sboffset() return a sector count. md: Replace calc_dev_size() by calc_num_sectors(). md: Make update_size() take the number of sectors. md: Better control of when do_md_stop is allowed to stop the array. md: get_disk_info(): Don't convert between signed and unsigned and back. md: Simplify restart_array(). md: alloc_disk_sb(): Return proper error value. md: Simplify sb_equal(). md: Simplify uuid_equal(). md: sb_equal(): Fix misleading printk. md: Fix a typo in the comment to cmd_match(). ...
| * md: linear: Make array_size sector-based and rename it to array_sectors.Andre Noll2008-07-211-8/+8
| | | | | | | | | | Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
| * md: Make mddev->array_size sector-based.Andre Noll2008-07-211-3/+3
| | | | | | | | | | | | | | | | | | This patch renames the array_size field of struct mddev_s to array_sectors and converts all instances to use units of 512 byte sectors instead of 1k blocks. Signed-off-by: Andre Noll <maan@systemlinux.org> Signed-off-by: NeilBrown <neilb@suse.de>
| * linear: correct disk numbering error checkNikanth Karthikesan2008-06-281-1/+1
| | | | | | | | | | | | | | | | | | From: "Nikanth Karthikesan" <knikanth@novell.com> Correct disk numbering problem check. Signed-off-by: Nikanth Karthikesan <knikanth@suse.de> Signed-off-by: Neil Brown <neilb@suse.de>
* | Add bvec_merge_data to handle stacked devices and ->merge_bvec()Alasdair G Kergon2008-07-031-4/+6
|/ | | | | | | | | | | | | | | | | | | | | | When devices are stacked, one device's merge_bvec_fn may need to perform the mapping and then call one or more functions for its underlying devices. The following bio fields are used: bio->bi_sector bio->bi_bdev bio->bi_size bio->bi_rw using bio_data_dir() This patch creates a new struct bvec_merge_data holding a copy of those fields to avoid having to change them directly in the struct bio when going down the stack only to have to change them back again on the way back up. (And then when the bio gets mapped for real, the whole exercise gets repeated, but that's a problem for another day...) Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: Neil Brown <neilb@suse.de> Cc: Milan Broz <mbroz@redhat.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* Remove blkdev warning triggered by using mdNeil Brown2008-05-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | As setting and clearing queue flags now requires that we hold a spinlock on the queue, and as blk_queue_stack_limits is called without that lock, get the lock inside blk_queue_stack_limits. For blk_queue_stack_limits to be able to find the right lock, each md personality needs to set q->queue_lock to point to the appropriate lock. Those personalities which didn't previously use a spin_lock, us q->__queue_lock. So always initialise that lock when allocated. With this in place, setting/clearing of the QUEUE_FLAG_PLUGGED bit will no longer cause warnings as it will be clear that the proper lock is held. Thanks to Dan Williams for review and fixing the silly bugs. Signed-off-by: NeilBrown <neilb@suse.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Alistair John Strachan <alistair@devzero.co.uk> Cc: Nick Piggin <npiggin@suse.de> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Jacek Luczak <difrost.kernel@gmail.com> Cc: Prakash Punnoor <prakash@punnoor.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* md: change ITERATE_RDEV to rdev_for_eachNeilBrown2008-02-061-1/+1
| | | | | | | | | As this is more in line with common practice in the kernel. Also swap the args around to be more like list_for_each. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Add UNPLUG traces to all appropriate placesAlan D. Brunelle2007-11-091-2/+1
| | | | | | | | Added blk_unplug interface, allowing all invocations of unplugs to result in a generated blktrace UNPLUG. Signed-off-by: Alan D. Brunelle <Alan.Brunelle@hp.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* block: convert blkdev_issue_flush() to use empty barriersJens Axboe2007-10-161-20/+0
| | | | | | | Then we can get rid of ->issue_flush_fn() and all the driver private implementations of that. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* Drop 'size' argument from bio_endio and bi_end_ioNeilBrown2007-10-101-2/+2
| | | | | | | | | | | | | As bi_end_io is only called once when the reqeust is complete, the 'size' argument is now redundant. Remove it. Now there is no need for bio_endio to subtract the size completed from bi_size. So don't do that either. While we are at it, change bi_end_io to return void. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* [BLOCK] Get rid of request_queue_t typedefJens Axboe2007-07-241-7/+7
| | | | | | | | | Some of the code has been gradually transitioned to using the proper struct request_queue, but there's lots left. So do a full sweet of the kernel and get rid of this typedef and replace its uses with the proper type. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* md: fix bug with linear hot-add and elsewhereNeilBrown2007-05-231-5/+5
| | | | | | | | | | | | | | Adding a drive to a linear array seems to have stopped working, due to changes elsewhere in md, and insufficient ongoing testing... So the patch to make linear hot-add work in the first place introduced a subtle bug elsewhere that interracts poorly with older version of mdadm. This fixes it all up. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] fix read past end of array in md/linear.cAndy Isaacson2007-03-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When iterating through an array, one must be careful to test one's index variable rather than another similarly-named variable. The loop will read off the end of conf->disks[] in the following (pathological) case: % dd bs=1 seek=840716287 if=/dev/zero of=d1 count=1 % for i in 2 3 4; do dd if=/dev/zero of=d$i bs=1k count=$(($i+150)); done % ./vmlinux ubd0=root ubd1=d1 ubd2=d2 ubd3=d3 ubd4=d4 # mdadm -C /dev/md0 --level=linear --raid-devices=4 /dev/ubd[1234] adding some printks, I saw this: [42949374.960000] hash_spacing = 821120 [42949374.960000] cnt = 4 [42949374.960000] min_spacing = 801 [42949374.960000] j=0 size=820928 sz=820928 [42949374.960000] i=0 sz=820928 hash_spacing=820928 [42949374.960000] j=1 size=64 sz=64 [42949374.960000] j=2 size=64 sz=128 [42949374.960000] j=3 size=64 sz=192 [42949374.960000] j=4 size=1515870810 sz=1515871002 Cc: Gautham R Shenoy <ego@in.ibm.com> Acked-by: Neil Brown <neilb@cse.unsw.edu.au> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] md: define backing_dev_info.congested_fn for raid0 and linearNeilBrown2006-10-031-0/+15
| | | | | | | | | | | Each backing_dev needs to be able to report whether it is congested, either by modulating BDI_*_congested in ->state, or by defining a ->congested_fn. md/raid did neither of these. This patch add a congested_fn which simply checks all component devices to see if they are congested. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: Fix a bug that recently crept into md/linearNeilBrown2006-08-061-3/+3
| | | | | | | | | | | | | | | | | A recent patch that allowed linear arrays to be reconfigured on-line allowed in a bug which results in divide by zero - not all mddev->array_size were converted to conf->array_size. This patch finished the conversion and fixed the bug. The offending patch was commit 7c7546ccf6463edbeee8d9aac6de7be1cd80d08a. Thanks to Simon Kirby <sim@netnation.com> for the bug report. Cc: Simon Kirby <sim@netnation.com> Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] md: allow a linear array to have drives added while activeNeilBrown2006-06-261-13/+61
| | | | | | Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
OpenPOWER on IntegriCloud