summaryrefslogtreecommitdiffstats
path: root/drivers/md/dm.c
Commit message (Collapse)AuthorAgeFilesLines
* block: rename bio bi_rw to bi_opfJens Axboe2016-08-071-5/+5
| | | | | | | | | | | | | Since commit 63a4cc24867d, bio->bi_rw contains flags in the lower portion and the op code in the higher portions. This means that old code that relies on manually setting bi_rw is most likely going to be broken. Instead of letting that brokeness linger, rename the member, to force old and out-of-tree code to break at compile time instead of at runtime. No intended functional changes in this commit. Signed-off-by: Jens Axboe <axboe@fb.com>
* dm: set DMF_SUSPENDED* _before_ clearing DMF_NOFLUSH_SUSPENDINGMike Snitzer2016-08-021-7/+7
| | | | | | | | | | | | | | Otherwise, there is potential for both DMF_SUSPENDED* and DMF_NOFLUSH_SUSPENDING to not be set during dm_suspend() -- which is definitely _not_ a valid state. This fix, in conjuction with "dm rq: fix the starting and stopping of blk-mq queues", addresses the potential for request-based DM multipath's __multipath_map() to see !dm_noflush_suspending() during suspend. Reported-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org
* Merge tag 'libnvdimm-for-4.8' of ↵Linus Torvalds2016-07-281-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: - Replace pcommit with ADR / directed-flushing. The pcommit instruction, which has not shipped on any product, is deprecated. Instead, the requirement is that platforms implement either ADR, or provide one or more flush addresses per nvdimm. ADR (Asynchronous DRAM Refresh) flushes data in posted write buffers to the memory controller on a power-fail event. Flush addresses are defined in ACPI 6.x as an NVDIMM Firmware Interface Table (NFIT) sub-structure: "Flush Hint Address Structure". A flush hint is an mmio address that when written and fenced assures that all previous posted writes targeting a given dimm have been flushed to media. - On-demand ARS (address range scrub). Linux uses the results of the ACPI ARS commands to track bad blocks in pmem devices. When latent errors are detected we re-scrub the media to refresh the bad block list, userspace can also request a re-scrub at any time. - Support for the Microsoft DSM (device specific method) command format. - Support for EDK2/OVMF virtual disk device memory ranges. - Various fixes and cleanups across the subsystem. * tag 'libnvdimm-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (41 commits) libnvdimm-btt: Delete an unnecessary check before the function call "__nd_device_register" nfit: do an ARS scrub on hitting a latent media error nfit: move to nfit/ sub-directory nfit, libnvdimm: allow an ARS scrub to be triggered on demand libnvdimm: register nvdimm_bus devices with an nd_bus driver pmem: clarify a debug print in pmem_clear_poison x86/insn: remove pcommit Revert "KVM: x86: add pcommit support" nfit, tools/testing/nvdimm/: unify shutdown paths libnvdimm: move ->module to struct nvdimm_bus_descriptor nfit: cleanup acpi_nfit_init calling convention nfit: fix _FIT evaluation memory leak + use after free tools/testing/nvdimm: add manufacturing_{date|location} dimm properties tools/testing/nvdimm: add virtual ramdisk range acpi, nfit: treat virtual ramdisk SPA as pmem region pmem: kill __pmem address space pmem: kill wmb_pmem() libnvdimm, pmem: use nvdimm_flush() for namespace I/O writes fs/dax: remove wmb_pmem() libnvdimm, pmem: flush posted-write queues on shutdown ...
* \ Merge tag 'dm-4.8-changes' of ↵Linus Torvalds2016-07-261-1126/+115
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - initially based on Jens' 'for-4.8/core' (given all the flag churn) and later merged with 'for-4.8/core' to pickup the QUEUE_FLAG_DAX commits that DM depends on to provide its DAX support - clean up the bio-based vs request-based DM core code by moving the request-based DM core code out to dm-rq.[hc] - reinstate bio-based support in the DM multipath target (done with the idea that fast storage like NVMe over Fabrics could benefit) -- while preserving support for request_fn and blk-mq request-based DM mpath - SCSI and DM multipath persistent reservation fixes that were coordinated with Martin Petersen. - the DM raid target saw the most extensive change this cycle; it now provides reshape and takeover support (by layering ontop of the corresponding MD capabilities) - DAX support for DM core and the linear, stripe and error targets - a DM thin-provisioning block discard vs allocation race fix that addresses potential for corruption - a stable fix for DM verity-fec's block calculation during decode - a few cleanups and fixes to DM core and various targets * tag 'dm-4.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (73 commits) dm: allow bio-based table to be upgraded to bio-based with DAX support dm snap: add fake origin_direct_access dm stripe: add DAX support dm error: add DAX support dm linear: add DAX support dm: add infrastructure for DAX support dm thin: fix a race condition between discarding and provisioning a block dm btree: fix a bug in dm_btree_find_next_single() dm raid: fix random optimal_io_size for raid0 dm raid: address checkpatch.pl complaints dm: call PR reserve/unreserve on each underlying device sd: don't use the ALL_TG_PT bit for reservations dm: fix second blk_delay_queue() parameter to be in msec units not jiffies dm raid: change logical functions to actually return bool dm raid: use rdev_for_each in status dm raid: use rs->raid_disks to avoid memory leaks on free dm raid: support delta_disks for raid1, fix table output dm raid: enhance reshape check and factor out reshape setup dm raid: allow resize during recovery dm raid: fix rs_is_recovering() to allow for lvextend ...
| * | dm: add infrastructure for DAX supportToshi Kani2016-07-201-2/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Change mapped device to implement direct_access function, dm_blk_direct_access(), which calls a target direct_access function. 'struct target_type' is extended to have target direct_access interface. This function limits direct accessible size to the dm_target's limit with max_io_len(). Add dm_table_supports_dax() to iterate all targets and associated block devices to check for DAX support. To add DAX support to a DM target the target must only implement the direct_access function. Add a new dm type, DM_TYPE_DAX_BIO_BASED, which indicates that mapped device supports DAX and is bio based. This new type is used to assure that all target devices have DAX support and remain that way after QUEUE_FLAG_DAX is set in mapped device. At initial table load, QUEUE_FLAG_DAX is set to mapped device when setting DM_TYPE_DAX_BIO_BASED to the type. Any subsequent table load to the mapped device must have the same type, or else it fails per the check in table_load(). Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
| * | dm: call PR reserve/unreserve on each underlying deviceChristoph Hellwig2016-07-181-15/+65
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | So far we tried to rely on the SCSI 'all target ports' bit to register all path, but for many setups this didn't work properly as the different paths are seen as separate initiators to the target instead of multiple ports of the same initiator. Because of that we'll stop setting the 'all target ports' bit in SCSI, and let device mapper handle iterating over the device for each path and register them manually. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
| * | dm mpath: add optional "queue_mode" featureMike Snitzer2016-06-101-13/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow a user to specify an optional feature 'queue_mode <mode>' where <mode> may be "bio", "rq" or "mq" -- which corresponds to bio-based, request_fn rq-based, and blk-mq rq-based respectively. If the queue_mode feature isn't specified the default for the "multipath" target is still "rq" but if dm_mod.use_blk_mq is set to Y it'll default to mode "mq". This new queue_mode feature introduces the ability for each multipath device to have its own queue_mode (whereas before this feature all multipath devices effectively had to have the same queue_mode). This commit also goes a long way to eliminate the awkward (ab)use of DM_TYPE_*, the associated filter_md_type() and other relatively fragile and difficult to maintain code. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
| * | dm: move request-based code out to dm-rq.[hc]Mike Snitzer2016-06-101-1097/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add some seperation between bio-based and request-based DM core code. 'struct mapped_device' and other DM core only structures and functions have been moved to dm-core.h and all relevant DM core .c files have been updated to include dm-core.h rather than dm.h DM targets should _never_ include dm-core.h! [block core merge conflict resolution from Stephen Rothwell] Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
* | | block: get rid of bio_rw and READAChristoph Hellwig2016-07-201-1/+1
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | These two are confusing leftover of the old world order, combining values of the REQ_OP_ and REQ_ namespaces. For callers that don't special case we mostly just replace bi_rw with bio_data_dir or op_is_write, except for the few cases where a switch over the REQ_OP_ values makes more sense. Any check for READA is replaced with an explicit check for REQ_RAHEAD. Also remove the READA alias for REQ_RAHEAD. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
* | block, drivers, fs: rename REQ_FLUSH to REQ_PREFLUSHMike Christie2016-06-071-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | To avoid confusion between REQ_OP_FLUSH, which is handled by request_fn drivers, and upper layers requesting the block layer perform a flush sequence along with possibly a WRITE, this patch renames REQ_FLUSH to REQ_PREFLUSH. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
* | block, drivers: add REQ_OP_FLUSH operationMike Christie2016-06-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | This adds a REQ_OP_FLUSH operation that is sent to request_fn based drivers by the block layer's flush code, instead of sending requests with the request->cmd_flags REQ_FLUSH bit set. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
* | drivers: use req op accessorMike Christie2016-06-071-1/+1
| | | | | | | | | | | | | | | | | | | | The req operation REQ_OP is separated from the rq_flag_bits definition. This converts the block layer drivers to use req_op to get the op from the request struct. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
* | dm: use bio op accessorsMike Christie2016-06-071-4/+4
| | | | | | | | | | | | | | | | | | Separate the op from the rq_flag_bits and have dm set/get the bio using bio_set_op_attrs/bio_op. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
* | dm: pass dm stats data dir instead of bi_rwMike Christie2016-06-071-9/+12
|/ | | | | | | | | | | | | | | | | | | It looks like dm stats cares about the data direction (READ vs WRITE) and does not need the bio/request flags. Commands like REQ_FLUSH, REQ_DISCARD and REQ_WRITE_SAME are currently always set with REQ_WRITE, so the extra check for REQ_DISCARD in dm_stats_account_io is not needed. This patch has it use the bio and request data_dir helpers instead of accessing the bi_rw/cmd_flags directly. This makes the next patches that remove the operation from the cmd_flags and bi_rw easier, because we will no longer have the REQ_WRITE bit set for operations like discards. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
* dm: remove unused mapped_device argument from free_tio()Mike Snitzer2016-05-051-6/+4
| | | | Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm: fix dm_target_io leak if clone_bio() returns an errorMikulas Patocka2016-04-111-1/+3
| | | | | | | | | | | | | | Commit c80914e81ec5b08 ("dm: return error if bio_integrity_clone() fails in clone_bio()") changed clone_bio() such that if it does return error then the alloc_tio() created resources (both the bio that was allocated to be a clone and the containing dm_target_io struct) will leak. Fix this by calling free_tio() in __clone_and_map_data_bio()'s clone_bio() error path. Fixes: c80914e81ec5b08 ("dm: return error if bio_integrity_clone() fails in clone_bio()") Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm: fix rq_end_stats() NULL pointer in dm_requeue_original_request()Bryn M. Reeves2016-03-141-1/+1
| | | | | | | | | | | | | | | | | An "old" (.request_fn) DM 'struct request' stores a pointer to the associated 'struct dm_rq_target_io' in rq->special. dm_requeue_original_request(), previously named dm_requeue_unmapped_original_request(), called dm_unprep_request() to reset rq->special to NULL. But rq_end_stats() would go on to hit a NULL pointer deference because its call to tio_from_request() returned NULL. Fix this by calling rq_end_stats() _before_ dm_unprep_request() Signed-off-by: Bryn M. Reeves <bmr@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Fixes: e262f34741 ("dm stats: add support for request-based DM devices") Cc: stable@vger.kernel.org # 4.2+
* dm: return error if bio_integrity_clone() fails in clone_bio()Mike Snitzer2016-03-101-7/+20
| | | | | | | clone_bio() now checks if bio_integrity_clone() returned an error rather than just drop it on the floor. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm: drop unnecessary assignment of md->queueBob Liu2016-03-101-6/+1
| | | | | | | | | | | md->queue and q are the same thing in dm_old_init_request_queue() and dm_mq_init_request_queue(). Also drop the temporary 'struct request_queue *q' in dm_old_init_request_queue(). Signed-off-by: Bob Liu <bob.liu@oracle.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm: reorder 'struct mapped_device' members to fix alignment and holesMike Snitzer2016-03-101-16/+18
| | | | | | | Saves 16 bytes by eliminating 4 4byte holes but more importantly: numerous members that crossed cachelines were fixed. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm: remove dummy definition of 'struct dm_table'Mike Snitzer2016-03-101-11/+3
| | | | | | | Change the map pointer in 'struct mapped_device' from 'struct dm_table __rcu *' to 'void __rcu *' to avoid the need for the dummy definition. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm: add 'dm_numa_node' module parameterMike Snitzer2016-03-101-8/+44
| | | | | | | | | | | Allows user to control which NUMA node the memory for DM device structures (e.g. mapped_device, request_queue, gendisk, blk_mq_tag_set) is allocated from. Defaults to NUMA_NO_NODE (-1). Allowable range is from -1 until the last online NUMA node id. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm: allow immutable request-based targets to use blk-mq pduMike Snitzer2016-02-221-7/+26
| | | | | | | This will allow DM multipath to use a portion of the blk-mq pdu space for target data (e.g. struct dm_mpath_io). Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm: rename target's per_bio_data_size to per_io_data_sizeMike Snitzer2016-02-221-4/+4
| | | | | | Request-based DM will also make use of per_bio_data_size. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm: distinquish old .request_fn (dm-old) vs dm-mq request-based DMMike Snitzer2016-02-221-49/+53
| | | | | | | | | | | Rename various methods to have either a "dm_old" or "dm_mq" prefix. Improve code comments to assist with understanding the duality of code that handles both "dm_old" and "dm_mq" cases. It is no much easier to quickly look at the code and _know_ that a given method is either 1) "dm_old" only 2) "dm_mq" only 3) common to both. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm: remove support for stacking dm-mq on .request_fn device(s)Mike Snitzer2016-02-221-39/+16
| | | | | | | | | | | | | | Remove all fiddley code that propped up this support for a blk-mq request-queue ontop of all .request_fn devices. Testing has proven this niche request-based dm-mq mode to be buggy, when testing fault tolerance with DM multipath, and there is no point trying to preserve it. Should help improve efficiency of pure dm-mq code and make code maintenance less delicate. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm: fix a couple locking issues with use of block interfacesMike Snitzer2016-02-221-7/+21
| | | | | | | | | | | | old_stop_queue() was checking blk_queue_stopped() without holding the q->queue_lock. dm_requeue_original_request() needed to check blk_queue_stopped(), with q->queue_lock held, before calling blk_mq_kick_requeue_list(). And a side-effect of that change is start_queue() must also call blk_mq_kick_requeue_list(). Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm: allocate blk_mq_tag_set rather than embed in mapped_deviceMike Snitzer2016-02-221-18/+27
| | | | | | | | The blk_mq_tag_set is only needed for dm-mq support. There is point wasting space in 'struct mapped_device' for non-dm-mq devices. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> # check kzalloc return
* dm: add 'dm_mq_nr_hw_queues' and 'dm_mq_queue_depth' module paramsMike Snitzer2016-02-221-2/+25
| | | | | | | | | | | | | | | | | Allow user to change these values via module params or sysfs. 'dm_mq_nr_hw_queues' defaults to 1 (max 32). 'dm_mq_queue_depth' defaults to 2048 (up from 64, which proved far too small under moderate sized workloads -- the dm-multipath device would continuously block waiting for tags (requests) to become available). The maximum is BLK_MQ_MAX_DEPTH (currently 10240). Keep in mind the total number of pre-allocated requests per request-based dm-mq device is 'dm_mq_nr_hw_queues' * 'dm_mq_queue_depth' (currently 2048). Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm: optimize dm_request_fn()Mike Snitzer2016-02-221-30/+17
| | | | | | | | DM multipath is the only request-based DM target -- which only supports tables with a single target that is immutable. Leverage this fact in dm_request_fn(). Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm: optimize dm_mq_queue_rq()Mike Snitzer2016-02-221-22/+18
| | | | | | | | | | | | | | DM multipath is the only dm-mq target. But that aside, request-based DM only supports tables with a single target that is immutable. Leverage this fact in dm_mq_queue_rq() by using the 'immutable_target' stored in the mapped_device when the table was made active. This saves the need to even take the read-side of the SRCU via dm_{get,put}_live_table. If the active DM table does not have an immutable target (e.g. "error" target was swapped in) then fallback to the slow-path where the target is looked up from the live table. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm: cleanup dm_any_congested()Mike Snitzer2016-02-221-9/+8
| | | | | | | The request-based DM support for checking queue congestion doesn't require access to the live DM table. Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm: remove unused dm_get_rq_mapinfo()Mike Snitzer2016-02-221-8/+0
| | | | Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm: fix excessive dm-mq context switchingMike Snitzer2016-02-221-7/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Request-based DM's blk-mq support (dm-mq) was reported to be 50% slower than if an underlying null_blk device were used directly. One of the reasons for this drop in performance is that blk_insert_clone_request() was calling blk_mq_insert_request() with @async=true. This forced the use of kblockd_schedule_delayed_work_on() to run the blk-mq hw queues which ushered in ping-ponging between process context (fio in this case) and kblockd's kworker to submit the cloned request. The ftrace function_graph tracer showed: kworker-2013 => fio-12190 fio-12190 => kworker-2013 ... kworker-2013 => fio-12190 fio-12190 => kworker-2013 ... Fixing blk_insert_clone_request()'s blk_mq_insert_request() call to _not_ use kblockd to submit the cloned requests isn't enough to eliminate the observed context switches. In addition to this dm-mq specific blk-core fix, there are 2 DM core fixes to dm-mq that (when paired with the blk-core fix) completely eliminate the observed context switching: 1) don't blk_mq_run_hw_queues in blk-mq request completion Motivated by desire to reduce overhead of dm-mq, punting to kblockd just increases context switches. In my testing against a really fast null_blk device there was no benefit to running blk_mq_run_hw_queues() on completion (and no other blk-mq driver does this). So hopefully this change doesn't induce the need for yet another revert like commit 621739b00e16ca2d ! 2) use blk_mq_complete_request() in dm_complete_request() blk_complete_request() doesn't offer the traditional q->mq_ops vs .request_fn branching pattern that other historic block interfaces do (e.g. blk_get_request). Using blk_mq_complete_request() for blk-mq requests is important for performance. It should be noted that, like blk_complete_request(), blk_mq_complete_request() doesn't natively handle partial completions -- but the request-based DM-multipath target does provide the required partial completion support by dm.c:end_clone_bio() triggering requeueing of the request via dm-mpath.c:multipath_end_io()'s return of DM_ENDIO_REQUEUE. dm-mq fix #2 is _much_ more important than #1 for eliminating the context switches. Before: cpu : usr=15.10%, sys=59.39%, ctx=7905181, majf=0, minf=475 After: cpu : usr=20.60%, sys=79.35%, ctx=2008, majf=0, minf=472 With these changes multithreaded async read IOPs improved from ~950K to ~1350K for this dm-mq stacked on null_blk test-case. The raw read IOPs of the underlying null_blk device for the same workload is ~1950K. Fixes: 7fb4898e0 ("block: add blk-mq support to blk_insert_cloned_request()") Fixes: bfebd1cdb ("dm: add full blk-mq support to request-based DM") Cc: stable@vger.kernel.org # 4.1+ Reported-by: Sagi Grimberg <sagig@dev.mellanox.co.il> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Jens Axboe <axboe@kernel.dk>
* dm: fix sparse "unexpected unlock" warnings in ioctl codeMike Snitzer2016-02-211-27/+29
| | | | | | | | | | | | | | | Rename dm_get_live_table_for_ioctl to dm_grab_bdev_for_ioctl and have it do the dm_{get,put}_live_table() rather than split those operations. The dm_grab_bdev_for_ioctl() callers only care about the block_device associated with a singleton DM device so there isn't any need to retain a reference to the live DM table. It is sufficient to: 1) dm_get_live_table() 2) bdgrab() the bdev associated with the singleton table's target 3) dm_put_live_table() 4) bdput() the bdev Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm: do not return target from dm_get_live_table_for_ioctl()Mike Snitzer2016-02-211-20/+13
| | | | | | | None of the callers actually used the returned target. Also, just reuse bdev pointer passed to dm_blk_ioctl(). Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm: fix dm_rq_target_io leak on faults with .request_fn DM w/ blk-mq pathsMike Snitzer2016-02-211-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Using request-based DM mpath configured with the following stacking (.request_fn DM mpath ontop of scsi-mq paths): echo Y > /sys/module/scsi_mod/parameters/use_blk_mq echo N > /sys/module/dm_mod/parameters/use_blk_mq 'struct dm_rq_target_io' would leak if a request is requeued before a blk-mq clone is allocated (or fails to allocate). free_rq_tio() wasn't being called. kmemleak reported: unreferenced object 0xffff8800b90b98c0 (size 112): comm "kworker/7:1H", pid 5692, jiffies 4295056109 (age 78.589s) hex dump (first 32 bytes): 00 d0 5c 2c 03 88 ff ff 40 00 bf 01 00 c9 ff ff ..\,....@....... e0 d9 b1 34 00 88 ff ff 00 00 00 00 00 00 00 00 ...4............ backtrace: [<ffffffff81672b6e>] kmemleak_alloc+0x4e/0xb0 [<ffffffff811dbb63>] kmem_cache_alloc+0xc3/0x1e0 [<ffffffff8117eae5>] mempool_alloc_slab+0x15/0x20 [<ffffffff8117ec1e>] mempool_alloc+0x6e/0x170 [<ffffffffa00029ac>] dm_old_prep_fn+0x3c/0x180 [dm_mod] [<ffffffff812fbd78>] blk_peek_request+0x168/0x290 [<ffffffffa0003e62>] dm_request_fn+0xb2/0x1b0 [dm_mod] [<ffffffff812f66e3>] __blk_run_queue+0x33/0x40 [<ffffffff812f9585>] blk_delay_work+0x25/0x40 [<ffffffff81096fff>] process_one_work+0x14f/0x3d0 [<ffffffff81097715>] worker_thread+0x125/0x4b0 [<ffffffff8109ce88>] kthread+0xd8/0xf0 [<ffffffff8167cb8f>] ret_from_fork+0x3f/0x70 [<ffffffffffffffff>] 0xffffffffffffffff crash> struct -o dm_rq_target_io struct dm_rq_target_io { ... } SIZE: 112 Fixes: e5863d9ad7 ("dm: allocate requests in target when stacking on blk-mq devices") Cc: stable@vger.kernel.org # 4.0+ Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm: do not reuse dm_blk_ioctl block_device input as local variableMike Snitzer2015-11-171-2/+3
| | | | | | | | | | (Ab)using the @bdev passed to dm_blk_ioctl() opens the potential for targets' .prepare_ioctl to fail if they go on to check the bdev for !NULL. Fixes: e56f81e0b01e ("dm: refactor ioctl handling") Reported-by: Junichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm: fix ioctl retry termination with signalJunichi Nomura2015-11-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | dm-mpath retries ioctl, when no path is readily available and the device is configured to queue I/O in such a case. If you want to stop the retry before multipathd decides to turn off queueing mode, you could send signal for the process to exit from the loop. However the check of fatal signal has not carried along when commit 6c182cd88d17 ("dm mpath: fix ioctl deadlock when no paths") moved the loop from dm-mpath to dm core. As a result, we can't terminate such a process in the retry loop. Easy reproducer of the situation is: # dmsetup create mp --table '0 1024 multipath 0 0 0 0' # dmsetup message mp 0 'queue_if_no_path' # sg_inq /dev/mapper/mp then you should be able to terminate sg_inq by pressing Ctrl+C. Fixes: 6c182cd88d17 ("dm mpath: fix ioctl deadlock when no paths") Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org
* block: change ->make_request_fn() and users to return a queue cookieJens Axboe2015-11-071-3/+3
| | | | | | | | | No functional changes in this patch, but it prepares us for returning a more useful cookie related to the IO that was queued up. Signed-off-by: Jens Axboe <axboe@fb.com> Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Keith Busch <keith.busch@intel.com>
* Merge tag 'dm-4.4-changes' of ↵Linus Torvalds2015-11-041-27/+182
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: "Smaller set of DM changes for this merge. I've based these changes on Jens' for-4.4/reservations branch because the associated DM changes required it. - Revert a dm-multipath change that caused a regression for unprivledged users (e.g. kvm guests) that issued ioctls when a multipath device had no available paths. - Include Christoph's refactoring of DM's ioctl handling and add support for passing through persistent reservations with DM multipath. - All other changes are very simple cleanups" * tag 'dm-4.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm switch: simplify conditional in alloc_region_table() dm delay: document that offsets are specified in sectors dm delay: capitalize the start of an delay_ctr() error message dm delay: Use DM_MAPIO macros instead of open-coded equivalents dm linear: remove redundant target name from error messages dm persistent data: eliminate unnecessary return values dm: eliminate unused "bioset" process for each bio-based DM device dm: convert ffs to __ffs dm: drop NULL test before kmem_cache_destroy() and mempool_destroy() dm: add support for passing through persistent reservations dm: refactor ioctl handling Revert "dm mpath: fix stalls when handling invalid ioctls" dm: initialize non-blk-mq queue data before queue is used
| * dm: eliminate unused "bioset" process for each bio-based DM deviceMikulas Patocka2015-10-311-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 54efd50bfd873e2dbf784e0b21a8027ba4299a3e ("block: make generic_make_request handle arbitrarily sized bios") makes it possible for block devices to process large bios. In doing so that commit allocates a new queue->bio_split bioset for each block device, this bioset is used for allocating bios when the driver needs to split large bios. Each bioset allocates a workqueue process, thus the above commit increases the number of processes allocated per block device. DM doesn't need the queue->bio_split bioset, thus we can deallocate it. This reduces the number of allocated processes per bio-based DM device from 3 to 2. Also remove the call to blk_queue_split(), it is not needed because DM does its own splitting. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
| * dm: drop NULL test before kmem_cache_destroy() and mempool_destroy()Julia Lawall2015-10-311-9/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove DM's unneeded NULL tests before calling these destroy functions, now that they check for NULL, thanks to these v4.3 commits: 3942d2991 ("mm/slab_common: allow NULL cache pointer in kmem_cache_destroy()") 4e3ca3e03 ("mm/mempool: allow NULL `pool' pointer in mempool_destroy()") The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x; @@ -if (x != NULL) \(kmem_cache_destroy\|mempool_destroy\|dma_pool_destroy\)(x); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
| * dm: add support for passing through persistent reservationsChristoph Hellwig2015-10-311-0/+123
| | | | | | | | | | | | | | | | | | | | | | This adds support to pass through persistent reservation requests similar to the existing ioctl handling, and with the same limitations, e.g. devices may only have a single target attached. This is mostly intended for multipathing. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
| * dm: refactor ioctl handlingChristoph Hellwig2015-10-311-13/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | This moves the call to blkdev_ioctl and the argument checking to DM core code, and only leaves a callout to find the block device to operate on in the targets. This simplifies the code and allows us to pass through ioctl-like command using other methods in the next patch. Also split out a helper around calling the prepare_ioctl method that will be reused for persistent reservation handling. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
| * dm: initialize non-blk-mq queue data before queue is usedMikulas Patocka2015-10-291-3/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit bfebd1cdb497a57757c83f5fbf1a29931591e2a4 ("dm: add full blk-mq support to request-based DM") moves the initialization of the fields backing_dev_info.congested_fn, backing_dev_info.congested_data and queuedata from the function dm_init_md_queue (that is called when the device is created) to dm_init_old_md_queue (that is called after the device type is determined). There is no locking when accessing these variables, thus it is possible for other parts of the kernel to briefly see this data in a transient state (e.g. queue->backing_dev_info.congested_fn initialized and md->queue->backing_dev_info.congested_data uninitialized, resulting in passing an incorrect parameter to the function dm_any_congested). This queue data is left initialized for blk-mq devices even though they that don't use it. Fixes: bfebd1cdb497 ("dm: add full blk-mq support to request-based DM") Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org # v4.1+
* | Merge branch 'for-4.4/integrity' of git://git.kernel.dk/linux-blockLinus Torvalds2015-11-041-2/+0
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull block integrity updates from Jens Axboe: ""This is the joint work of Dan and Martin, cleaning up and improving the support for block data integrity" * 'for-4.4/integrity' of git://git.kernel.dk/linux-block: block, libnvdimm, nvme: provide a built-in blk_integrity nop profile block: blk_flush_integrity() for bio-based drivers block: move blk_integrity to request_queue block: generic request_queue reference counting nvme: suspend i/o during runtime blk_integrity_unregister md: suspend i/o during runtime blk_integrity_unregister md, dm, scsi, nvme, libnvdimm: drop blk_integrity_unregister() at shutdown block: Inline blk_integrity in struct gendisk block: Export integrity data interval size in sysfs block: Reduce the size of struct blk_integrity block: Consolidate static integrity profile properties block: Move integrity kobject to struct gendisk
| * | md, dm, scsi, nvme, libnvdimm: drop blk_integrity_unregister() at shutdownDan Williams2015-10-211-2/+0
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that the integrity profile is statically allocated there is no work to do when shutting down an integrity enabled block device. Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: James Bottomley <JBottomley@Odin.com> Acked-by: NeilBrown <neilb@suse.com> Acked-by: Keith Busch <keith.busch@intel.com> Acked-by: Vishal Verma <vishal.l.verma@intel.com> Tested-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
* | dm: fix request-based dm error reportingJunichi Nomura2015-10-061-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | end_clone_bio() is a endio callback for clone bio and should check and save the clone's bi_error for error reporting. However, 4246a0b63bd8 ("block: add a bi_error field to struct bio") changed the function to check the original bio's bi_error, which is 0. Without this fix, clone's error is ignored and reported to the original request as success. Thus data corruption will be observed. Fixes: 4246a0b63bd8 ("block: add a bi_error field to struct bio") Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* | dm: fix AB-BA deadlock in __dm_destroy()Junichi Nomura2015-10-011-4/+2
|/ | | | | | | | | | | | | | | | | | | | | | | | __dm_destroy() takes io_barrier SRCU lock (dm_get_live_table) and suspend_lock in reverse order. Doing so can cause AB-BA deadlock: __dm_destroy dm_swap_table --------------------------------------------------- mutex_lock(suspend_lock) dm_get_live_table() srcu_read_lock(io_barrier) dm_sync_table() synchronize_srcu(io_barrier) .. waiting for dm_put_live_table() mutex_lock(suspend_lock) .. waiting for suspend_lock Fix this by taking the locks in proper order. Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Fixes: ab7c7bb6f4ab ("dm: hold suspend_lock while suspending device during device deletion") Acked-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org
OpenPOWER on IntegriCloud