summaryrefslogtreecommitdiffstats
path: root/drivers/md/dm-ioctl.c
Commit message (Collapse)AuthorAgeFilesLines
* dm: allow remove to be deferredMikulas Patocka2013-11-091-6/+30
| | | | | | | | | | | | | | | | | | | | | | | | | This patch allows the removal of an open device to be deferred until it is closed. (Previously such a removal attempt would fail.) The deferred remove functionality is enabled by setting the flag DM_DEFERRED_REMOVE in the ioctl structure on DM_DEV_REMOVE or DM_REMOVE_ALL ioctl. On return from DM_DEV_REMOVE, the flag DM_DEFERRED_REMOVE indicates if the device was removed immediately or flagged to be removed on close - if the flag is clear, the device was removed. On return from DM_DEV_STATUS and other ioctls, the flag DM_DEFERRED_REMOVE is set if the device is scheduled to be removed on closure. A device that is scheduled to be deleted can be revived using the message "@cancel_deferred_remove". This message clears the DMF_DEFERRED_REMOVE flag so that the device won't be deleted on close. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* dm: add statistics supportMikulas Patocka2013-09-051-8/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Support the collection of I/O statistics on user-defined regions of a DM device. If no regions are defined no statistics are collected so there isn't any performance impact. Only bio-based DM devices are currently supported. Each user-defined region specifies a starting sector, length and step. Individual statistics will be collected for each step-sized area within the range specified. The I/O statistics counters for each step-sized area of a region are in the same format as /sys/block/*/stat or /proc/diskstats but extra counters (12 and 13) are provided: total time spent reading and writing in milliseconds. All these counters may be accessed by sending the @stats_print message to the appropriate DM device via dmsetup. The creation of DM statistics will allocate memory via kmalloc or fallback to using vmalloc space. At most, 1/4 of the overall system memory may be allocated by DM statistics. The admin can see how much memory is used by reading /sys/module/dm_mod/parameters/stats_current_allocated_bytes See Documentation/device-mapper/statistics.txt for more details. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm ioctl: cleanup error handling in table_loadMike Snitzer2013-09-051-18/+16
| | | | | | | Make use of common cleanup code. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm ioctl: increase granularity of type_lock when loading tableMike Snitzer2013-09-051-2/+4
| | | | | | | | | | | | | | | Hold the mapped device's type_lock before calling populate_table() since it is where the table's type is determined based on the specified targets. There is no need to allow concurrent table loads to race to establish the table's targets or type. This eliminates the need to grab the lock in dm_table_set_type(). Also verify that the type_lock is held in both dm_set_md_type() and dm_get_md_type(). Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm ioctl: prevent rename to empty name or uuidAlasdair Kergon2013-09-051-1/+1
| | | | | | | | | | | | | | | A device-mapper device must always have a name consisting of a non-empty string. If the device also has a uuid, this similarly must not be an empty string. The DM_DEV_CREATE ioctl enforces these rules when the device is created, but this patch is needed to enforce them when DM_DEV_RENAME is used to change the name or uuid. Reported-by: Zdenek Kabelac <zkabelac@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Mikulas Patocka <mpatocka@redhat.com>
* dm: optimize use SRCU and RCUMikulas Patocka2013-07-101-40/+82
| | | | | | | | | | | | | | | | | | | | | | This patch removes "io_lock" and "map_lock" in struct mapped_device and "holders" in struct dm_table and replaces these mechanisms with sleepable-rcu. Previously, the code would call "dm_get_live_table" and "dm_table_put" to get and release table. Now, the code is changed to call "dm_get_live_table" and "dm_put_live_table". dm_get_live_table locks sleepable-rcu and dm_put_live_table unlocks it. dm_get_live_table_fast/dm_put_live_table_fast can be used instead of dm_get_live_table/dm_put_live_table. These *_fast functions use non-sleepable RCU, so the caller must not block between them. If the code changes active or inactive dm table, it must call dm_sync_table before destroying the old table. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm: use __GFP_HIGHMEM in __vmallocMikulas Patocka2013-07-101-1/+1
| | | | | | | | | | | | Use __GFP_HIGHMEM in __vmalloc. Pages allocated with __vmalloc can be allocated in high memory that is not directly mapped to kernel space, so use __GFP_HIGHMEM just like vmalloc does. This patch reduces memory pressure slightly because pages can be allocated in the high zone. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm ioctl: set noio flag to avoid __vmalloc deadlockMikulas Patocka2013-07-101-0/+3
| | | | | | | | | | | | | | Set noio flag while calling __vmalloc() because it doesn't fully respect gfp flags to avoid a possible deadlock (see commit 502624bdad3dba45dfaacaf36b7d83e39e74b2d2). This should be backported to stable kernels 3.8 and newer. The kernel 3.8 doesn't have memalloc_noio_save(), so we should set and restore process flag PF_MEMALLOC instead. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm ioctl: allow message to return dataMikulas Patocka2013-03-011-1/+35
| | | | | | | | | | | | | | | | This patch introduces enhanced message support that allows the device-mapper core to recognise messages that are common to all devices, and for messages to return data to userspace. Core messages are processed by the function "message_for_md". If the device mapper doesn't support the message, it is passed to the target driver. If the message returns data, the kernel sets the flag DM_MESSAGE_OUT_FLAG. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm ioctl: optimize functions without variable paramsMikulas Patocka2013-03-011-18/+34
| | | | | | | | | | | | | | | | | | | | Device-mapper ioctls receive and send data in a buffer supplied by userspace. The buffer has two parts. The first part contains a 'struct dm_ioctl' and has a fixed size. The second part depends on the ioctl and has a variable size. This patch recognises the specific ioctls that do not use the variable part of the buffer and skips allocating memory for it. In particular, when a device is suspended and a resume ioctl is sent, this now avoid memory allocation completely. The variable "struct dm_ioctl tmp" is moved from the function copy_params to its caller ctl_ioctl and renamed to param_kernel. It is used directly when the ioctl function doesn't need any arguments. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm ioctl: introduce ioctl_flagsMikulas Patocka2013-03-011-23/+41
| | | | | | | | | | | This patch introduces flags for each ioctl function. So far, one flag is defined, IOCTL_FLAGS_NO_PARAMS. It is set if the function processing the ioctl doesn't take or produce any parameters in the section of the data buffer that has a variable size. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm: fix truncated status stringsMikulas Patocka2013-03-011-5/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Avoid returning a truncated table or status string instead of setting the DM_BUFFER_FULL_FLAG when the last target of a table fills the buffer. When processing a table or status request, the function retrieve_status calls ti->type->status. If ti->type->status returns non-zero, retrieve_status assumes that the buffer overflowed and sets DM_BUFFER_FULL_FLAG. However, targets don't return non-zero values from their status method on overflow. Most targets returns always zero. If a buffer overflow happens in a target that is not the last in the table, it gets noticed during the next iteration of the loop in retrieve_status; but if a buffer overflow happens in the last target, it goes unnoticed and erroneously truncated data is returned. In the current code, the targets behave in the following way: * dm-crypt returns -ENOMEM if there is not enough space to store the key, but it returns 0 on all other overflows. * dm-thin returns errors from the status method if a disk error happened. This is incorrect because retrieve_status doesn't check the error code, it assumes that all non-zero values mean buffer overflow. * all the other targets always return 0. This patch changes the ti->type->status function to return void (because most targets don't use the return code). Overflow is detected in retrieve_status: if the status method fills up the remaining space completely, it is assumed that buffer overflow happened. Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm ioctl: use kmalloc if possibleMikulas Patocka2012-12-211-13/+32
| | | | | | | | | | | | | | | | | | If the parameter buffer is small enough, try to allocate it with kmalloc() rather than vmalloc(). vmalloc is noticeably slower than kmalloc because it has to manipulate page tables. In my tests, on PA-RISC this patch speeds up activation 13 times. On Opteron this patch speeds up activation by 5%. This patch introduces a new function free_params() to free the parameters and this uses new flags that record whether or not vmalloc() was used and whether or not the input buffer must be wiped after use. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm ioctl: remove PF_MEMALLOCMikulas Patocka2012-12-211-9/+4
| | | | | | | | When allocating memory for the userspace ioctl data, set some appropriate GPF flags directly instead of using PF_MEMALLOC. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm ioctl: prevent unsafe change to dm_ioctl data_sizeAlasdair G Kergon2012-12-211-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Abort dm ioctl processing if userspace changes the data_size parameter after we validated it but before we finished copying the data buffer from userspace. The dm ioctl parameters are processed in the following sequence: 1. ctl_ioctl() calls copy_params(); 2. copy_params() makes a first copy of the fixed-sized portion of the userspace parameters into the local variable "tmp"; 3. copy_params() then validates tmp.data_size and allocates a new structure big enough to hold the complete data and copies the whole userspace buffer there; 4. ctl_ioctl() reads userspace data the second time and copies the whole buffer into the pointer "param"; 5. ctl_ioctl() reads param->data_size without any validation and stores it in the variable "input_param_size"; 6. "input_param_size" is further used as the authoritative size of the kernel buffer. The problem is that userspace code could change the contents of user memory between steps 2 and 4. In particular, the data_size parameter can be changed to an invalid value after the kernel has validated it. This lets userspace force the kernel to access invalid kernel memory. The fix is to ensure that the size has not changed at step 4. This patch shouldn't have a security impact because CAP_SYS_ADMIN is required to run this code, but it should be fixed anyway. Reported-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> Cc: stable@kernel.org
* dm thin: commit before gathering statusAlasdair G Kergon2012-07-271-1/+4
| | | | | | | | | | | | | | | | Commit outstanding metadata before returning the status for a dm thin pool so that the numbers reported are as up-to-date as possible. The commit is not performed if the device is suspended or if the DM_NOFLUSH_FLAG is supplied by userspace and passed to the target through a new 'status_flags' parameter in the target's dm_status_fn. The userspace dmsetup tool will support the --noflush flag with the 'dmsetup status' and 'dmsetup wait' commands from version 1.02.76 onwards. Tested-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm: reject trailing characters in sccanf inputMikulas Patocka2012-03-281-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | Device mapper uses sscanf to convert arguments to numbers. The problem is that the way we use it ignores additional unmatched characters in the scanned string. For example, this `if (sscanf(string, "%d", &number) == 1)' will match a number, but also it will match number with some garbage appended, like "123abc". As a result, device mapper accepts garbage after some numbers. For example the command `dmsetup create vg1-new --table "0 16384 linear 254:1bla 34816bla"' will pass without an error. This patch fixes all sscanf uses in device mapper. It appends "%c" with a pointer to a dummy character variable to every sscanf statement. The construct `if (sscanf(string, "%d%c", &number, &dummy) == 1)' succeeds only if string is a null-terminated number (optionally preceded by some whitespace characters). If there is some character appended after the number, sscanf matches "%c", writes the character to the dummy variable and returns 2. We check the return value for 1 and consequently reject numbers with some garbage appended. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm ioctl: do not leak argv if target message only contains whitespaceJesper Juhl2012-03-071-1/+1
| | | | | | | | | | | If 'argc' is zero we jump to the 'out:' label, but this leaks the (unused) memory that 'dm_split_args()' allocated for 'argv' if the string being split consisted entirely of whitespace. Jump to the 'out_argv:' label instead to free up that memory. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Cc: stable@kernel.org Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm table: add immutable featureAlasdair G Kergon2011-10-311-0/+11
| | | | | | | | | | Introduce DM_TARGET_IMMUTABLE to indicate that the target type cannot be mixed with any other target type, and once loaded into a device, it cannot be replaced with a table containing a different type. The thin provisioning pool device will use this. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm ioctl: forbid multiple device specifiersMikulas Patocka2011-08-021-0/+6
| | | | | | | | | | Exactly one of name, uuid or device must be specified when referencing an existing device. This removes the ambiguity (risking the wrong device being updated) if two conflicting parameters were specified. Previously one parameter got used and any others were ignored silently. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm ioctl: introduce __get_dev_cellMikulas Patocka2011-08-021-17/+24
| | | | | | | | | Move logic to find device based on major/minor number to a separate function __get_dev_cell (similar to __get_uuid_cell and __get_name_cell). This makes the function __find_device_hash_cell more straightforward. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm ioctl: fill in device parameters in more ioctlsMikulas Patocka2011-08-021-27/+36
| | | | | | | | | | | | Move parameter filling from find_device to __find_device_hash_cell. This patch causes ioctls using __find_device_hash_cell (DM_DEV_REMOVE_CMD, DM_DEV_SUSPEND_CMD - resume, DM_TABLE_CLEAR_CMD) to return device parameters, bringing them into line with the other ioctls. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm ioctl: prevent empty messageAlasdair G Kergon2011-08-021-0/+5
| | | | | | | Detect invalid empty messages in core dm instead of requiring every target to check this. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm ioctl: add flag to wipe buffers for secure dataMilan Broz2011-03-241-2/+21
| | | | | | | | | | | | | | | | | | | Add DM_SECURE_DATA_FLAG which userspace can use to ensure that all buffers allocated for dm-ioctl are wiped immediately after use. The user buffer is wiped as well (we do not want to keep and return sensitive data back to userspace if the flag is set). Wiping is useful for cryptsetup to ensure that the key is present in memory only in defined places and only for the time needed. (For crypt, key can be present in table during load or table status, wait and message commands). Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm ioctl: prepare for crypt key wipingMilan Broz2011-03-241-14/+11
| | | | | | | | | Prepare code for implementing buffer wipe flag. No functional change in this patch. Signed-off-by: Milan Broz <mbroz@redhat.com> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm ioctl: suppress needless warning messagesMilan Broz2011-01-131-4/+4
| | | | | | | | | | | | The device-mapper should not send warning messages to syslog if a device is not found. This can be done by userspace according to the returned dm-ioctl error code. So move these messages to debug level and use rate limiting to not flood syslog. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm ioctl: allow rename to fill empty uuidPeter Jones2011-01-131-25/+78
| | | | | | | | | | | | | | | | | | | | | Allow the uuid of a mapped device to be set after device creation. Previously the uuid (which is optional) could only be set by DM_DEV_CREATE. If no uuid was supplied it could not be set later. Sometimes it's necessary to create the device before the uuid is known, and in such cases the uuid must be filled in after the creation. This patch extends DM_DEV_RENAME to accept a uuid accompanied by a new flag DM_UUID_FLAG. This can only be done once and if no uuid was previously supplied. It cannot be used to change an existing uuid. DM_VERSION_MINOR is also bumped to 19 to indicate this interface extension is available. Signed-off-by: Peter Jones <pjones@redhat.com> Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* llseek: automatically add .llseek fopArnd Bergmann2010-10-151-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
* dm: allow autoloading of dm modPeter Rajnoha2010-08-121-2/+5
| | | | | | | | | Add devname:mapper/control and MAPPER_CTRL_MINOR module alias to support dm-mod module autoloading. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Peter Rajnoha <prajnoha@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm ioctl: refactor dm_table_completeWill Drewry2010-08-121-34/+0
| | | | | | | | | This change unifies the various checks and finalization that occurs on a table prior to use. By doing so, it allows table construction without traversing the dm-ioctl interface. Signed-off-by: Will Drewry <wad@chromium.org> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm: do not initialise full request queue when bio basedMike Snitzer2010-08-121-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Change bio-based mapped devices no longer to have a fully initialized request_queue (request_fn, elevator, etc). This means bio-based DM devices no longer register elevator sysfs attributes ('iosched/' tree or 'scheduler' other than "none"). In contrast, a request-based DM device will continue to have a full request_queue and will register elevator sysfs attributes. Therefore a user can determine a DM device's type by checking if elevator sysfs attributes exist. First allocate a minimalist request_queue structure for a DM device (needed for both bio and request-based DM). Initialization of a full request_queue is deferred until it is known that the DM device is request-based, at the end of the table load sequence. Factor DM device's request_queue initialization: - common to both request-based and bio-based into dm_init_md_queue(). - specific to request-based into dm_init_request_based_queue(). The md->type_lock mutex is used to protect md->queue, in addition to md->type, during table_load(). A DM device's first table_load will establish the immutable md->type. But md->queue initialization, based on md->type, may fail at that time (because blk_init_allocated_queue cannot allocate memory). Therefore any subsequent table_load must (re)try dm_setup_md_queue independently of establishing md->type. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm ioctl: make bio or request based device type immutableMike Snitzer2010-08-121-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Determine whether a mapped device is bio-based or request-based when loading its first (inactive) table and don't allow that to be changed later. This patch performs different device initialisation in each of the two cases. (We don't think it's necessary to add code to support changing between the two types.) Allowed md->type transitions: DM_TYPE_NONE to DM_TYPE_BIO_BASED DM_TYPE_NONE to DM_TYPE_REQUEST_BASED We now prevent table_load from replacing the inactive table with a conflicting type of table even after an explicit table_clear. Introduce 'type_lock' into the struct mapped_device to protect md->type and to prepare for the next patch that will change the queue initialization and allocate memory while md->type_lock is held. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com> drivers/md/dm-ioctl.c | 15 +++++++++++++++ drivers/md/dm.c | 37 ++++++++++++++++++++++++++++++------- drivers/md/dm.h | 5 +++++ include/linux/dm-ioctl.h | 4 ++-- 4 files changed, 52 insertions(+), 9 deletions(-)
* dm ioctl: use nonseekable_openArnd Bergmann2010-08-121-0/+1
| | | | | | | | | | | The dm control device does not implement read/write, so it has no use for seeking. Using no_llseek prevents falling back to default_llseek, which requires the BKL. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm: separate device deletion from dm_putKiyoshi Ueda2010-08-121-4/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch separates the device deletion code from dm_put() to make sure the deletion happens in the process context. By this patch, device deletion always occurs in an ioctl (process) context and dm_put() can be called in interrupt context. As a result, the request-based dm's bad dm_put() usage pointed out by Mikulas below disappears. http://marc.info/?l=dm-devel&m=126699981019735&w=2 Without this patch, I confirmed there is a case to crash the system: dm_put() => dm_table_destroy() => vfree() => BUG_ON(in_interrupt()) Some more backgrounds and details: In request-based dm, a device opener can remove a mapped_device while the last request is still completing, because bios in the last request complete first and then the device opener can close and remove the mapped_device before the last request completes: CPU0 CPU1 ================================================================= <<INTERRUPT>> blk_end_request_all(clone_rq) blk_update_request(clone_rq) bio_endio(clone_bio) == end_clone_bio blk_update_request(orig_rq) bio_endio(orig_bio) <<I/O completed>> dm_blk_close() dev_remove() dm_put(md) <<Free md>> blk_finish_request(clone_rq) .... dm_end_request(clone_rq) free_rq_clone(clone_rq) blk_end_request_all(orig_rq) rq_completed(md) So request-based dm used dm_get()/dm_put() to hold md for each I/O until its request completion handling is fully done. However, the final dm_put() can call the device deletion code which must not be run in interrupt context and may cause kernel panic. To solve the problem, this patch moves the device deletion code, dm_destroy(), to predetermined places that is actually deleting the mapped_device in ioctl (process) context, and changes dm_put() just to decrement the reference count of the mapped_device. By this change, dm_put() can be used in any context and the symmetric model below is introduced: dm_create(): create a mapped_device dm_destroy(): destroy a mapped_device dm_get(): increment the reference count of a mapped_device dm_put(): decrement the reference count of a mapped_device dm_destroy() waits for all references of the mapped_device to disappear, then deletes the mapped_device. dm_destroy() uses active waiting with msleep(1), since deleting the mapped_device isn't performance-critical task. And since at this point, nobody opens the mapped_device and no new reference will be taken, the pending counts are just for racing completing activity and will eventually decrease to zero. For the unlikely case of the forced module unload, dm_destroy_immediate(), which doesn't wait and forcibly deletes the mapped_device, is also introduced and used in dm_hash_remove_all(). Otherwise, "rmmod -f" may be stuck and never return. And now, because the mapped_device is deleted at this point, subsequent accesses to the mapped_device may cause NULL pointer references. Cc: stable@kernel.org Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm ioctl: release _hash_lock between devices in remove_allKiyoshi Ueda2010-08-121-19/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch changes dm_hash_remove_all() to release _hash_lock when removing a device. After removing the device, dm_hash_remove_all() takes _hash_lock and searches the hash from scratch again. This patch is a preparation for the next patch, which changes device deletion code to wait for md reference to be 0. Without this patch, the wait in the next patch may cause AB-BA deadlock: CPU0 CPU1 ----------------------------------------------------------------------- dm_hash_remove_all() down_write(_hash_lock) table_status() md = find_device() dm_get(md) <increment md->holders> dm_get_live_or_inactive_table() dm_get_inactive_table() down_write(_hash_lock) <in the md deletion code> <wait for md->holders to be 0> Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Cc: stable@kernel.org Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm ioctl: return uevent flag after renamePeter Rajnoha2010-08-121-17/+24
| | | | | | | | | | | | | All the dm ioctls that generate uevents set the DM_UEVENT_GENERATED flag so that userspace knows whether or not to wait for a uevent to be processed before continuing, The dm rename ioctl sets this flag but was not structured to return it to userspace. This patch restructures the rename ioctl processing to behave like the other ioctls that return data and so fix this. Signed-off-by: Peter Rajnoha <prajnoha@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm ioctl: make __dev_status voidAlasdair G Kergon2010-08-121-36/+31
| | | | | | __dev_status() cannot fail so make it void and simplify callers. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm ioctl: remove __dev_status from geometry and target messagePeter Rajnoha2010-08-121-6/+0
| | | | | | | | | | | Remove useless __dev_status call while processing an ioctl that sets up device geometry and target message. The data is not returned to userspace so there is no point collecting it and in the case of target_message it is collected before processing the message so if it did return it might be stale. Signed-off-by: Peter Rajnoha <prajnoha@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm ioctl: introduce flag indicating uevent was generatedPeter Rajnoha2010-03-061-7/+12
| | | | | | | | | Set a new DM_UEVENT_GENERATED_FLAG when returning from ioctls to indicate that a uevent was actually generated. This tells the userspace caller that it may need to wait for the event to be processed. Signed-off-by: Peter Rajnoha <prajnoha@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm ioctl: only issue uevent on resume if state changedMike Snitzer2010-03-061-4/+5
| | | | | | | | | | Only issue a uevent on a resume if the state of the device changed, i.e. if it was suspended and/or its table was replaced. Signed-off-by: Dave Wysochanski <dwysocha@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@kernel.org Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm: rename dm_suspended to dm_suspended_mdKiyoshi Ueda2009-12-101-4/+4
| | | | | | | | | | | This patch renames dm_suspended() to dm_suspended_md() and keeps it internal to dm. No functional change. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Cc: Mike Anderson <andmike@linux.vnet.ibm.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm: keep old table until after resume succeededAlasdair G Kergon2009-12-101-4/+6
| | | | | | | | | | | | When swapping a new table into place, retain the old table until its replacement is in place. An old check for an empty table is removed because this is enforced in populate_table(). __unbind() becomes redundant when followed by __bind(). Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm ioctl: retrieve status from inactive tableMike Snitzer2009-12-101-13/+57
| | | | | | | | | | | | | Add the flag DM_QUERY_INACTIVE_TABLE_FLAG to the ioctls to return infomation about the loaded-but-not-yet-active table instead of the live table. Prior to this patch it was impossible to obtain this information until the device had been 'resumed'. Userspace dmsetup and libdevmapper support the flag as of version 1.02.40. e.g. dmsetup info --inactive vg1-lv1 Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm ioctl: forbid messages to devices being deletedMike Anderson2009-12-101-0/+6
| | | | | | | | Once we begin deleting a device, prevent any further messages being sent to targets of its table (to avoid races). Signed-off-by: Mike Anderson <andmike@linux.vnet.ibm.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm: rename dm_get_table to dm_get_live_tableAlasdair G Kergon2009-12-101-7/+7
| | | | | | Rename dm_get_table to dm_get_live_table. Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm ioctl: prefer strlcpy over strncpyRoel Kluin2009-12-101-2/+2
| | | | | | | | | | | | | | strlcpy() will always null terminate the string. The code should already guarantee this as the last bytes are already NULs and the string lengths were restricted before being stored in hc. Removing the '-1' becomes necessary so strlcpy() doesn't lose the last character of a maximum-length string. - agk Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm: avoid _hash_lock deadlockMikulas Patocka2009-12-101-4/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix a reported deadlock if there are still unprocessed multipath events on a device that is being removed. _hash_lock is held during dev_remove while trying to send the outstanding events. Sending the events requests the _hash_lock again in dm_copy_name_and_uuid. This patch introduces a separate lock around regions that modify the link to the hash table (dm_set_mdptr) or the name or uuid so that dm_copy_name_and_uuid no longer needs _hash_lock. Additionally, dm_copy_name_and_uuid can only be called if md exists so we can drop the dm_get() and dm_put() which can lead to a BUG() while md is being freed. The deadlock: #0 [ffff8106298dfb48] schedule at ffffffff80063035 #1 [ffff8106298dfc20] __down_read at ffffffff8006475d #2 [ffff8106298dfc60] dm_copy_name_and_uuid at ffffffff8824f740 #3 [ffff8106298dfc90] dm_send_uevents at ffffffff88252685 #4 [ffff8106298dfcd0] event_callback at ffffffff8824c678 #5 [ffff8106298dfd00] dm_table_event at ffffffff8824dd01 #6 [ffff8106298dfd10] __hash_remove at ffffffff882507ad #7 [ffff8106298dfd30] dev_remove at ffffffff88250865 #8 [ffff8106298dfd60] ctl_ioctl at ffffffff88250d80 #9 [ffff8106298dfee0] do_ioctl at ffffffff800418c4 #10 [ffff8106298dff00] vfs_ioctl at ffffffff8002fab9 #11 [ffff8106298dff40] sys_ioctl at ffffffff8004bdaf #12 [ffff8106298dff80] tracesys at ffffffff8005d28d (via system_call) Cc: stable@kernel.org Reported-by: guy keren <choo@actcom.co.il> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* Driver-Core: extend devnode callbacks to provide permissionsKay Sievers2009-09-191-1/+1
| | | | | | | | | | | | | This allows subsytems to provide devtmpfs with non-default permissions for the device node. Instead of the default mode of 0600, null, zero, random, urandom, full, tty, ptmx now have a mode of 0666, which allows non-privileged processes to access standard device nodes in case no other userspace process applies the expected permissions. This also fixes a wrong assignment in pktcdvd and a checkpatch.pl complain. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* dm: enable request based optionKiyoshi Ueda2009-06-221-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch enables request-based dm. o Request-based dm and bio-based dm coexist, since there are some target drivers which are more fitting to bio-based dm. Also, there are other bio-based devices in the kernel (e.g. md, loop). Since bio-based device can't receive struct request, there are some limitations on device stacking between bio-based and request-based. type of underlying device bio-based request-based ---------------------------------------------- bio-based OK OK request-based -- OK The device type is recognized by the queue flag in the kernel, so dm follows that. o The type of a dm device is decided at the first table binding time. Once the type of a dm device is decided, the type can't be changed. o Mempool allocations are deferred to at the table loading time, since mempools for request-based dm are different from those for bio-based dm and needed mempool type is fixed by the type of table. o Currently, request-based dm supports only tables that have a single target. To support multiple targets, we need to support request splitting or prevent bio/request from spanning multiple targets. The former needs lots of changes in the block layer, and the latter needs that all target drivers support merge() function. Both will take a time. Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
* dm ioctl: support cookies for udevMilan Broz2009-06-221-4/+10
| | | | | | | | | | | | | | | | | | | | Add support for passing a 32 bit "cookie" into the kernel with the DM_SUSPEND, DM_DEV_RENAME and DM_DEV_REMOVE ioctls. The (unsigned) value of this cookie is returned to userspace alongside the uevents issued by these ioctls in the variable DM_COOKIE. This means the userspace process issuing these ioctls can be notified by udev after udev has completed any actions triggered. To minimise the interface extension, we pass the cookie into the kernel in the event_nr field which is otherwise unused when calling these ioctls. Incrementing the version number allows userspace to determine in advance whether or not the kernel supports the cookie. If the kernel does support this but userspace does not, there should be no impact as the new variable will just get ignored. Signed-off-by: Milan Broz <mbroz@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
OpenPOWER on IntegriCloud