summaryrefslogtreecommitdiffstats
path: root/drivers/macintosh/macio_asic.c
Commit message (Collapse)AuthorAgeFilesLines
* sections: fix section conflicts in drivers/macintoshAndi Kleen2012-10-061-1/+1
| | | | | | | | [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivercore: Output common devicetree information in ueventGrant Likely2012-02-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | When userspace needs to find a specific device, it currently isn't easy to resolve a /sys/devices/ path from a specific device tree node. Nor is it easy to obtain the compatible list for devices. This patch generalizes the code that inserts OF_* values into the uevent device attribute so that any device that is attached to an OF node will have that information exported to userspace. Without this patch only platform devices and some powerpc-specific busses have access to this data. The original function also creates a MODALIAS property for the compatible list, but that code has not been generalized into the common case because it has the potential to break module loading on a lot of bus types. Bus types are still responsible for their own MODALIAS properties. Boot tested on ARM and compile tested on PowerPC and SPARC. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Tobias Klauser <tklauser@distanz.ch> Cc: Frederic Lambert <frdrc66@gmail.com> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Mark Brown <broonie@sirena.org.uk> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/macio: Ensure all dma routines get copied overNishanth Aravamudan2010-11-291-4/+3
| | | | | | | | | Also add a comment to dev_archdata, indicating that changes there need to be verified against the driver code. Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/macio: Fix probing of macio devices by using the right of match tableBenjamin Herrenschmidt2010-06-021-1/+0
| | | | | | | | | | | | | | Grant patches added an of mach table to struct device_driver. However, while he changed the macio device code to use that, he left the match table pointer in struct macio_driver and didn't update drivers to use the "new" one, thus breaking the probing. This completes the change by moving all drivers to setup the "new" one, removing all traces of the old one, and while at it (since it changes the exact same locations), I also remove two other duplicates from struct driver which are the name and owner fields. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/macio: Don't dereference pointer before null checkAndreas Schwab2010-06-021-3/+4
| | | | | Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* of: change of_match_device to work with struct deviceGrant Likely2010-05-221-3/+2
| | | | | | | | | | The of_node pointer is now stored directly in struct device, so of_match_device() should work with any device, not just struct of_device. This patch changes the interface to of_match_device() to accept a struct device instead of struct of_device. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* drivercore: Add of_match_table to the common device driversGrant Likely2010-05-221-3/+2
| | | | | | | | | | OF-style matching can be available to any device, on any type of bus. This patch allows any driver to provide an OF match table when CONFIG_OF is enabled so that drivers can be bound against devices described in the device tree. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
* arch/powerpc: Move dma_mask from of_device into pdev_archdataGrant Likely2010-05-221-2/+2
| | | | | | | | | By moving dma_mask into pdev_archdata, and adding archdata to struct of_device, it makes it possible to substitute of_device with struct platform_device, which is a stepping stone to removing the of_platform bus entirely. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* of: Always use 'struct device.of_node' to get device node pointer.Grant Likely2010-05-181-8/+8
| | | | | | | | | | | | The following structure elements duplicate the information in 'struct device.of_node' and so are being eliminated. This patch makes all readers of these elements use device.of_node instead. (struct of_device *)->node (struct dev_archdata *)->prom_node (sparc) (struct dev_archdata *)->of_node (powerpc & microblaze) Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* powerpc/macio: Add dma_parms support to macioBenjamin Herrenschmidt2009-12-081-0/+5
| | | | | | | | This adds dma_parms to macio devices and initializes them with default values. This will allow pata_macio to setup the appropriate max segment size for the block layer. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/macio: Add devres support to macio_deviceBenjamin Herrenschmidt2009-12-081-0/+47
| | | | | | | This adds some basic devres support. When enabled via macio_enable_devres() resources requested by drivers will be automatically released. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/macio: Don't the address of an array element before boundcheckingroel kluin2009-08-201-2/+4
| | | | | | | Check whether index is within bounds before grabbing the element. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/pmac: Fix DMA ops for MacIO devicesBenjamin Herrenschmidt2009-06-261-0/+11
| | | | | | | | | | | | The macio_dev's created to map devices inside the MacIO ASICs don't have proper dma_ops. This causes crashes on some machines since the SCSI code calls dma_map_* on our behalf using the device we hang from. This fixes it by copying the parent PCI device dma_ops into the macio_dev when creating it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* macintosh: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers2009-01-061-12/+12
| | | | | Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* some kmalloc/memset ->kzalloc (tree wide)Yoann Padioleau2007-07-191-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Transform some calls to kmalloc/memset to a single kzalloc (or kcalloc). Here is a short excerpt of the semantic patch performing this transformation: @@ type T2; expression x; identifier f,fld; expression E; expression E1,E2; expression e1,e2,e3,y; statement S; @@ x = - kmalloc + kzalloc (E1,E2) ... when != \(x->fld=E;\|y=f(...,x,...);\|f(...,x,...);\|x=E;\|while(...) S\|for(e1;e2;e3) S\) - memset((T2)x,0,E1); @@ expression E1,E2,E3; @@ - kzalloc(E1 * E2,E3) + kcalloc(E1,E2,E3) [akpm@linux-foundation.org: get kcalloc args the right way around] Signed-off-by: Yoann Padioleau <padator@wanadoo.fr> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Acked-by: Russell King <rmk@arm.linux.org.uk> Cc: Bryan Wu <bryan.wu@analog.com> Acked-by: Jiri Slaby <jirislaby@gmail.com> Cc: Dave Airlie <airlied@linux.ie> Acked-by: Roland Dreier <rolandd@cisco.com> Cc: Jiri Kosina <jkosina@suse.cz> Acked-by: Dmitry Torokhov <dtor@mail.ru> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Acked-by: Pierre Ossman <drzeus-list@drzeus.cx> Cc: Jeff Garzik <jeff@garzik.org> Cc: "David S. Miller" <davem@davemloft.net> Acked-by: Greg KH <greg@kroah.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [POWERPC] Rename get_property to of_get_property: partial driversStephen Rothwell2007-04-271-1/+1
| | | | | | | This does drivers/machintosh and the hvc code. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
* Revert "[POWERPC] Rename get_property to of_get_property: drivers"Paul Mackerras2007-04-261-1/+1
| | | | | | This reverts commit d05c7a80cf39ae7d0f8d0c3e47c93d51fcd393d3, which included changes which should go via other subsystem maintainers.
* [POWERPC] Rename get_property to of_get_property: driversStephen Rothwell2007-04-131-1/+1
| | | | | | Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] powermac: Use the new of_device common uevent handlerSylvain Munaut2007-04-131-97/+1
| | | | | | | | The generation of the uevent is now common to all bus using of_device. Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* Merge branch 'merge'Paul Mackerras2006-08-011-1/+1
|\
| * [PATCH] powerpc: fix trigger handling in the new irq codeBenjamin Herrenschmidt2006-07-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch slightly reworks the new irq code to fix a small design error. I removed the passing of the trigger to the map() calls entirely, it was not a good idea to have one call do two different things. It also fixes a couple of corner cases. Mapping a linux virtual irq to a physical irq now does only that. Setting the trigger is a different action which has a different call. The main changes are: - I no longer call host->ops->map() for an already mapped irq, I just return the virtual number that was already mapped. It was called before to give an opportunity to change the trigger, but that was causing issues as that could happen while the interrupt was in use by a device, and because of the trigger change, map would potentially muck around with things in a racy way. That was causing much burden on a given's controller implementation of map() to get it right. This is much simpler now. map() is only called on the initial mapping of an irq, meaning that you know that this irq is _not_ being used. You can initialize the hardware if you want (though you don't have to). - Controllers that can handle different type of triggers (level/edge/etc...) now implement the standard irq_chip->set_type() call as defined by the generic code. That means that you can use the standard set_irq_type() to configure an irq line manually if you wish or (though I don't like that interface), pass explicit trigger flags to request_irq() as defined by the generic kernel interfaces. Also, using those interfaces guarantees that your controller set_type callback is called with the descriptor lock held, thus providing locking against activity on the same interrupt (including mask/unmask/etc...) automatically. A result is that, for example, MPIC's own map() implementation calls irq_set_type(NONE) to configure the hardware to the default triggers. - To allow the above, the irq_map array entry for the new mapped interrupt is now set before map() callback is called for the controller. - The irq_create_of_mapping() (also used by irq_of_parse_and_map()) function for mapping interrupts from the device-tree now also call the separate set_irq_type(), and only does so if there is a change in the trigger type. - While I was at it, I changed pci_read_irq_line() (which is the helper I would expect most archs to use in their pcibios_fixup() to get the PCI interrupt routing from the device tree) to also handle a fallback when the DT mapping fails consisting of reading the PCI_INTERRUPT_PIN to know wether the device has an interrupt at all, and the the PCI_INTERRUPT_LINE to get an interrupt number from the device. That number is then mapped using the default controller, and the trigger is set to level low. That default behaviour works for several platforms that don't have a proper interrupt tree like Pegasos. If it doesn't work for your platform, then either provide a proper interrupt tree from the firmware so that fallback isn't needed, or don't call pci_read_irq_line() - Add back a bit that got dropped by my main rework patch for properly clearing pending IPIs on pSeries when using a kexec Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [POWERPC] powermac: Constify & voidify get_property()Jeremy Kerr2006-07-311-4/+6
|/ | | | | | | | | | | | | Now that get_property() returns a void *, there's no need to cast its return value. Also, treat the return value as const, so we can constify get_property later. powermac platform & macintosh driver changes. Built for pmac32_defconfig, g5_defconfig Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Add new interrupt mapping core and change platforms to use itBenjamin Herrenschmidt2006-07-031-49/+103
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds the new irq remapper core and removes the old one. Because there are some fundamental conflicts with the old code, like the value of NO_IRQ which I'm now setting to 0 (as per discussions with Linus), etc..., this commit also changes the relevant platform and driver code over to use the new remapper (so as not to cause difficulties later in bisecting). This patch removes the old pre-parsing of the open firmware interrupt tree along with all the bogus assumptions it made to try to renumber interrupts according to the platform. This is all to be handled by the new code now. For the pSeries XICS interrupt controller, a single remapper host is created for the whole machine regardless of how many interrupt presentation and source controllers are found, and it's set to match any device node that isn't a 8259. That works fine on pSeries and avoids having to deal with some of the complexities of split source controllers vs. presentation controllers in the pSeries device trees. The powerpc i8259 PIC driver now always requests the legacy interrupt range. It also has the feature of being able to match any device node (including NULL) if passed no device node as an input. That will help porting over platforms with broken device-trees like Pegasos who don't have a proper interrupt tree. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] powermac: Fix some 64b resource damageBenjamin Herrenschmidt2006-07-011-2/+2
| | | | | | | | | | | | | The 64 bits resource patches did a bit of damage on PowerMac causing a buffer overflow in macio_asic and a warning in a sound driver. The former is fixed by reverting the sprintf of the bus_id to %08x as it was before. The bus_id used for macio devices is always a 32 bits value (macio always sits in 32 bits space) and since it's exposed to userland, the format of the string shouldn't be changed like that anyway. The second by using the proper type for printk. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Remove obsolete #include <linux/config.h>Jörn Engel2006-06-301-1/+0
| | | | | Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* [PATCH] 64bit resource: fix up printks for resources in misc driversGreg Kroah-Hartman2006-06-271-2/+2
| | | | | | | | | | This is needed if we wish to change the size of the resource structures. Based on an original patch from Vivek Goyal <vgoyal@in.ibm.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] macintosh: tidy-up driver_register() return valuesBjorn Helgaas2006-03-231-4/+1
| | | | | | | | | | | | | | Remove the assumption that driver_register() returns the number of devices bound to the driver. In fact, it returns zero for success or a negative error value. All callers of macio_register_driver() either ignore the return value or return it as the return value of a module_init() function. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] MODALIAS= for macioOlaf Hering2006-02-011-24/+48
| | | | | | | | | | | | | Prodive a MODALIAS= enviroment variable for devices on the mac-io bus. Change the buffer length counter to not waste memory by advancing the pointer for the next string too far. Tested on an ibook1 with modular pmac_zilog. Signed-off-by: Olaf Hering <olh@suse.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Add macio_bus_type probe and remove methodsRussell King2006-01-131-3/+3
| | | | | | Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] powerpc: Remove device_node addrs/n_addrBenjamin Herrenschmidt2006-01-091-13/+13
| | | | | | | | | | | | The pre-parsed addrs/n_addrs fields in struct device_node are finally gone. Remove the dodgy heuristics that did that parsing at boot and remove the fields themselves since we now have a good replacement with the new OF parsing code. This patch also fixes a bunch of drivers to use the new code instead, so that at least pmac32, pseries, iseries and g5 defconfigs build. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] powerpc: Update OF address parsersBenjamin Herrenschmidt2006-01-091-8/+4
| | | | | | | | | | | This updates the OF address parsers to return the IO flags indicating the type of address obtained. It also adds a PCI call for converting physical addresses that hit IO space into into IO tokens, and add routines that return the translated addresses into struct resource Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] powerpc: convert macio_asic to use prom_parseBenjamin Herrenschmidt2006-01-091-94/+140
| | | | | | | | Converts the macio_asic core to use the new OF parsing routines instead of relying on the pre-parsed values in struct device_node. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] driver core: replace "hotplug" by "uevent"Kay Sievers2006-01-041-2/+2
| | | | | | | | | Leave the overloaded "hotplug" word to susbsystems which are handling real devices. The driver core does not "plug" anything, it just exports the state to userspace and generates events. Signed-off-by: Kay Sievers <kay.sievers@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] fix missing includesTim Schmielau2005-10-301-0/+2
| | | | | | | | | | | | | | | | | | | | | I recently picked up my older work to remove unnecessary #includes of sched.h, starting from a patch by Dave Jones to not include sched.h from module.h. This reduces the number of indirect includes of sched.h by ~300. Another ~400 pointless direct includes can be removed after this disentangling (patch to follow later). However, quite a few indirect includes need to be fixed up for this. In order to feed the patches through -mm with as little disturbance as possible, I've split out the fixes I accumulated up to now (complete for i386 and x86_64, more archs to follow later) and post them before the real patch. This way this large part of the patch is kept simple with only adding #includes, and all hunks are independent of each other. So if any hunk rejects or gets in the way of other patches, just drop it. My scripts will pick it up again in the next round. Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] openfirmware: implement hotplug for macio devicesJeff Mahoney2005-07-061-0/+71
| | | | | | | | | | | | | | | | | | | This adds the hotplug routine for generating hotplug events when devices are seen on the macio bus. It uses the attributed created by the sysfs nodes to generate the hotplug environment vars for userspace. Since the characters allowed inside the 'compatible' field are NUL terminated, they are exported as individual OF_COMPATIBLE_# variables, with OF_COMPATIBLE_N maintaining a count of how many there are. In order for hotplug to work with macio devices, patches to module-init-tools and hotplug must be applied. Those patches are available at: ftp://ftp.suse.com/pub/people/jeffm/linux/macio-hotplug/ Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] openfirmware: add sysfs nodes for open firmware devicesJeff Mahoney2005-07-061-0/+3
| | | | | | | | | | | | | | | | | | | This adds sysfs nodes that the hotplug userspace can use to load the appropriate modules. In order for hotplug to work with macio devices, patches to module-init-tools and hotplug must be applied. Those patches are available at: ftp://ftp.suse.com/pub/people/jeffm/linux/macio-hotplug/ Changes: The previous versions were built on 2.6.12. 2.6.13-rcX introduced a device_attribute parameter to the show functions. Since that parameter was treated as the output buffer, memory corruption would result, causing Oopsen very quickly. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] openfirmware: generate device table for userspaceJeff Mahoney2005-07-061-2/+2
| | | | | | | | | | | | | | | | This converts the usage of struct of_match to struct of_device_id, similar to pci_device_id. This allows a device table to be generated, which can be parsed by depmod(8) to generate a map file for module loading. In order for hotplug to work with macio devices, patches to module-init-tools and hotplug must be applied. Those patches are available at: ftp://ftp.suse.com/pub/people/jeffm/linux/macio-hotplug/ Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] fix u32 vs. pm_message_t in drivers/macintoshPavel Machek2005-04-161-1/+1
| | | | | | | | | | I thought I'm done with fixing u32 vs. pm_message_t ... unfortunately that turned out not to be the case as Russel King pointed out. Here are fixes for drivers/macintosh. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds2005-04-161-0/+636
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
OpenPOWER on IntegriCloud