summaryrefslogtreecommitdiffstats
path: root/drivers/leds/Kconfig
Commit message (Collapse)AuthorAgeFilesLines
* leds: add driver for LM3530 ALSShreshtha Kumar Sahu2011-03-221-0/+10
| | | | | | | | | | | Simple backlight driver for National Semiconductor LM3530. Presently only manual mode is supported, PWM and ALS support to be added. Signed-off-by: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* leds: fix up dependenciesJohannes Berg2010-12-021-9/+41
| | | | | | | | | | | | | | | | | | It's not useful to build LED triggers when there's no LEDs that can be triggered by them. Therefore, fix up the dependencies so that this cannot happen, and fix a few users that select triggers to depend on LEDS_CLASS as well (there is also one user that also selects LEDS_CLASS, which is OK). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Tested-by: Ingo Molnar <mingo@elte.hu> Cc: Arnd Hannemann <arnd@arndnet.de> Cc: Michal Hocko <mhocko@suse.cz> Cc: Richard Purdie <rpurdie@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* leds: update LP552x support Kconfig and MakefileSamu Onkalo2010-11-121-0/+18
| | | | | | | | | | Provide configuration and compilation support for LP5521 and LP5523 Signed-off-by: Samu Onkalo <samu.p.onkalo@nokia.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* led-class: always implement blinkingJohannes Berg2010-11-121-1/+1
| | | | | | | | | | | | | | | | | | | | Currently, blinking LEDs can be awkward because it is not guaranteed that all LEDs implement blinking. The trigger that wants it to blink then needs to implement its own timer solution. Rather than require that, add led_blink_set() API that triggers can use. This function will attempt to use hw blinking, but if that fails implements a timer for it. To stop blinking again, brightness_set() also needs to be wrapped into API that will stop the software blink. As a result of this, the timer trigger becomes a very trivial one, and hopefully we can finally see triggers using blinking as well because it's always easy to use. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Richard Purdie <rpurdie@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* leds: add LED driver for Big Network series LEDsSimon Guinot2010-10-071-0/+9
| | | | | | | | | This patch add a LED class driver for LEDs found on the LaCie 2Big and 5Big Network v2 boards. The LEDs are wired to a CPLD and are controlled through a GPIO extension bus. Signed-off-by: Simon Guinot <sguinot@lacie.com> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
* [ARM] Kirkwood: add LaCie d2 Network v2 supportSimon Guinot2010-09-191-1/+1
| | | | | Signed-off-by: Simon Guinot <sguinot@lacie.com> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
* leds: add LED driver for Network Space v2 LEDsSimon Guinot2010-07-161-0/+9
| | | | | | | | | | | | | This patch add a LED class driver for the dual-GPIO LEDs found on the Network Space v2 board (and parents). This include Internet Space v2, Network Space (Max) v2 and d2 Network v2 boards. This dual-GPIO LED is wired to a CPLD and can blink in relation with the SATA activity. The driver expose this capability through a "sata" sysfs attribute. Signed-off-by: Simon Guinot <sguinot@lacie.com> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
* leds: Kconfig fixesRichard Purdie2010-05-281-3/+3
| | | | | | Soekris net5501 is x86 only and cleanup some undeeded dependencies Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
* leds: Add mc13783 LED supportPhilippe Rétornaz2010-05-261-0/+7
| | | | | | | This add basic led support for Freescale MC13783 PMIC. Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
* leds: Add LED driver for the Soekris net5501 boardBjarke Istrup Pedersen2010-05-261-0/+10
| | | | | | | | | | | | | | It is based on the previously submitted code by Alessandro Zummo, but is changed to use the new GPIO driver with 2.6.33, and the driver has been moved to drivers/leds where it belongs. [akpm@linux-foundation.org: coding-style fixes] [randy.dunlap@oracle.com: fix net5501 kconfig] Signed-off-by: Bjarke Istrup Pedersen <gurligebis@gentoo.org> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
* leds: Add Dell Business Class Netbook LED driverBob Rodgers2010-03-161-0/+7
| | | | | | | | | | | | | | | This patch adds an LED driver to support the Dell Activity LED on the Dell Latitude 2100 netbook and future products to come. The Activity LED is visible externally in the lid so classroom instructors can observe it from a distance. The driver uses the sysfs led_class and provides a standard LED interface. Signed-off by: Bob Rodgers <Robert_Rodgers@dell.com> Signed-off-by: Louis Davis <Louis_Davis@dell.com> Signed-off-by: Jim Dailey <Jim_Dailey@dell.com>, Developers Acked-by: Matthew Garrett <mjg@redhat.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
* leds: Kconfig cleanupH Hartley Sweeten2010-03-161-36/+39
| | | | | | | | | | | Remove the need for "depends on LEDS_CLASS" by wrapping the affected config options in an if/endif block. Similar for "depends on LEDS_TRIGGERS". LEDS_COBALT_RAQ still has a "depends on LEDS_CLASS=y" since it cannot be selected to build as a module. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
* leds: ALIX2: Add dependency to !GPIO_CS5335Daniel Mack2010-03-161-1/+1
| | | | | | | | | | | | | | The ALIX2 LED driver and the CS5535 GPIO drivers share the same I/O range which causes a conflict if they're both enabled. Fix this for now by adding Kconfig dependencies. While at it, also drop the EXPERIMENTAL flag, as the code has been around for awhile already. Note that this is a hack. At some point, a real platform support for this board should be added which handles the LEDs via the leds-gpio driver. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
* led: Enable led in 88pm860xHaojian Zhuang2010-03-071-0/+7
| | | | | | | | Enable led sub device in Marvell 88PM860x. Two LED arrays can be supported. Each LED array can be used for R,G,B leds. Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* leds: Add LED class driver for regulator driven LEDs.Antonio Ospite2009-12-171-0/+6
| | | | | | | | | | | | This driver provides an interface for controlling LEDs (or vibrators) connected to PMICs for which there is a regulator framework driver. This driver can be used, for instance, to control vibrator on all Motorola EZX phones using the pcap-regulator driver services. Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
* leds: Add driver for ADP5520/ADP5501 MFD PMICsMichael Hennerich2009-12-161-0/+10
| | | | | | | Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
* leds: Add driver for LT3593 controlled LEDsDaniel Mack2009-12-161-0/+8
| | | | | | | | | | | | | | | The LT3593 is a step-up DC/DC converter designed to drive up to ten white LEDs in series. The current flow can be set with a control pin. This driver controls any number of such devices connected on generic GPIOs and exports the function as as platform_driver. The gpio_led platform data struct definition is reused for this purpose. Successfully tested on a PXA embedded board. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
* leds: LED driver for Intel NAS SS4200 series (v5)Dave Hansen2009-12-161-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | This code is based on a driver that came in the "Open-source and GPL components" download here: http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Server+Products&ProductLine=Intel%C2%AE+Storage+Systems&ProductProduct=Intel%C2%AE+Entry+Storage+System+SS4200-E&OSVersion=OS+Independent It was in a file called nasgpio.c inside of a second zip file called SS4200-E_Linux_SIO_Driver-v1.4.zip and is based on this updated to use the LED subsystem with the ioctl and hardware monitor support removed. I don't have any need for brightness control, and its code is *completely* separate from the on/off controls implemented here. If anyone else wants it, I'd be happy to look into adding it, but I don't care enough for now. Except for the probe routines, I rewrote most of it. I also Note that I don't have any hardware documentation except for the original driver. Thanks go to Arjan for his help in getting the original source for this released and for chasing down some licensing issues. Signed-off-by: Dave Hansen <dave@sr71.net> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
* leds: Fix indentation in LEDS_LP3944 Kconfig entryAntonio Ospite2009-09-071-3/+3
| | | | | Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
* leds: Add WM831x status LED driverMark Brown2009-09-071-0/+7
| | | | | | | | | | | | | | | The WM831x devices feature two software controlled status LEDs with hardware assisted blinking. The device can also autonomously control the LEDs based on a selection of sources. This can be configured at boot time using either platform data or the chip OTP. A sysfs file in the style of that for triggers allowing the control source to be configured at run time. Triggers can't be used here since they can't depend on the implementation details of a specific LED type. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
* leds: LED driver for National Semiconductor LP3944 Funlight ChipAntonio Ospite2009-06-231-0/+11
| | | | | | | | | | | | | | | | | | | | LEDs driver for National Semiconductor LP3944 Funlight Chip http://www.national.com/pf/LP/LP3944.html This helper chip can drive up to 8 leds, with two programmable DIM modes; it could even be used as a gpio expander but this driver assumes it is used as a led controller. The DIM modes are used to set _blink_ patterns for leds, the pattern is specified supplying two parameters: - period: from 0s to 1.6s - duty cycle: percentage of the period the led is on, from 0 to 100 LP3944 can be found on Motorola A910 smartphone, where it drives the rgb leds, the camera flash light and the displays backlights. Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
* leds: Remove an orphan Kconfig entryRichard Purdie2009-06-231-10/+0
| | | | | | Remove an orphan Kconfig entry (LEDS_LP5521) Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
* leds: alix-leds2 fixed for Award BIOSTobias Mueller2009-06-231-0/+1
| | | | | | | | | | Add initialisation of GPIO ports for compatibility with boards with Award BIOS (e.g. ALIX.3D3). Signed-off-by: Tobias Mueller <Tobias_Mueller@twam.info> Reviewed-by: Constantin Baranov <const@mimas.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
* leds: introduce lp5521 led driverFelipe Balbi2009-04-061-0/+10
| | | | | | | | | | | LP5521 is a three channel led driver with support for hardware accelerated patterns (currently used via lp5521-only sysfs interface). Currently, it's used on n810 device. Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
* leds: add BD2802GU LED driverKim Kyuwon2009-04-061-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | ROHM BD2802GU is a RGB LED controller attached to i2c bus and specifically engineered for decoration purposes. This RGB controller incorporates lighting patterns and illuminates. This driver is designed to minimize power consumption, so when there is no emitting LED, it enters to reset state. And because the BD2802GU has lots of features that can't be covered by the current LED framework, it provides Advanced Configuration Function(ADF) mode, so that user applications can set registers of BD2802GU directly. Here are basic usage examples : ; to turn on LED (not blink) $ echo 1 > /sys/class/leds/led1_R/brightness ; to blink LED $ echo timer > /sys/class/leds/led1_R/trigger $ echo 1 > /sys/class/leds/led1_R/delay_on $ echo 1 > /sys/class/leds/led1_R/delay_off ; to turn off LED $ echo 0 > /sys/class/leds/led1_R/brightness [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Kim Kyuwon <chammoru@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
* leds: remove experimental flag from leds-clevo-mailNémeth Márton2009-04-061-2/+2
| | | | | | | | The leds-clevo-mail driver is in the mainline kernel since 2.6.25 and works without severe problems. Make this driver available for a larger audience. Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
* leds: Add gpio-led triggerFelipe Balbi2009-04-061-0/+13
| | | | | | | | | | | | | | | | | | | | | The gpio led trigger will allow leds to be triggered by gpio events. When we give the led a gpio number, the trigger will request_irq() on that so we don't have to keep polling for gpio state. It's useful for usecases as n810's keypad leds that could be triggered by the gpio event generated when user slides up to show the keypad. We also provide means for userland to tell us what is the desired brightness for that special led when it goes on so userland could use information from ambient light sensors and not set led brightness too high if it's not necessary. Signed-off-by: Felipe Balbi <me@felipebalbi.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
* leds: Add rb532 LED driver for the User LEDPhil Sutter2009-04-061-0/+7
| | | | | | | | | | Mikrotik built six LEDs into the Routerboard 532, from which one is destined for custom use, the so called "User LED". This patch adds a driver for it, based on the LEDs class. Signed-off-by: Phil Sutter <n0-1@freewrt.org> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
* leds: simple driver for pwm driven LEDsLuotao Fu2009-04-061-0/+6
| | | | | | | | | | Add a simple driver for pwm driver LEDs. pwm_id and period can be defined in board file. It is developed for pxa, however it is probably generic enough to be used on other platforms with pwm. Signed-off-by: Luotao Fu <l.fu@pengutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
* leds: Add dac124s085 driverGuennadi Liakhovetski2009-04-061-0/+7
| | | | | | | | | Add an LED driver using the DAC124S085 DAC from NatSemi [randy.dunlap@oracle.com: use header files for interfaces] Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
* leds: Add openfirmware platform device supportTrent Piepho2009-04-061-1/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add bindings to support LEDs defined as of_platform devices in addition to the existing bindings for platform devices. New options in Kconfig allow the platform binding code and/or the of_platform code to be turned on. The of_platform code is of course only available on archs that have OF support. The existing probe and remove methods are refactored to use new functions create_gpio_led(), to create and register one led, and delete_gpio_led(), to unregister and free one led. The new probe and remove methods for the of_platform driver can then share most of the common probe and remove code with the platform driver. The suspend and resume methods aren't shared, but they are very short. The actual led driving code is the same for LEDs created by either binding. The OF bindings are based on patch by Anton Vorontsov <avorontsov@ru.mvista.com>. They have been extended to allow multiple LEDs per device. Signed-off-by: Trent Piepho <tpiepho@freescale.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
* trivial: fix typos/grammar errors in Kconfig textsMatt LaPlante2009-03-301-3/+3
| | | | | | Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* netfilter: x_tables: add LED trigger targetAdam Nielsen2009-02-201-0/+3
| | | | | | | | | | Kernel module providing implementation of LED netfilter target. Each instance of the target appears as a led-trigger device, which can be associated with one or more LEDs in /sys/class/leds/ Signed-off-by: Adam Nielsen <a.nielsen@shikadi.net> Acked-by: Richard Purdie <rpurdie@linux.intel.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
* lis3lv02d: merge with leds hp diskEric Piel2009-01-151-7/+0
| | | | | | | | | | | | | | | | Move the second part of the HP laptop disk protection functionality (a red led) to the same driver. From a purely Linux developer's point of view, the led and the accelerometer have nothing related. However, they correspond to the same ACPI functionality, and so will always be used together, moreover as they share the same ACPI PNP alias, there is no other simple to allow to have same loaded at the same time if they are not in the same module. Also make it requires the led class to compile and update the Kconfig text. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* leds: Add WM8350 LED driverMark Brown2009-01-081-0/+7
| | | | | | | | | | | | | | | | | | | The voltage and current regulators on the WM8350 AudioPlus PMIC can be used in concert to provide a power efficient LED driver. This driver implements support for this within the standard LED class. Platform initialisation code should configure the LED hardware in the init callback provided by the WM8350 core driver. The callback should use wm8350_isink_set_flash(), wm8350_dcdc25_set_mode() and wm8350_dcdc_set_slot() to configure the operating parameters of the regulators for their hardware and then then use wm8350_register_led() to instantiate the LED driver. This driver was originally written by Liam Girdwood, though it has been extensively modified since then. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
* leds: fix Cobalt Raq LED dependencyYoichi Yuasa2009-01-081-1/+1
| | | | | | | | Cobalt Raq LEDs require LEDS_CLASS=y. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
* leds: ALIX.2 LEDs driverConstantin Baranov2009-01-081-0/+6
| | | | | | | Driver for PC Engines ALIX.2 and ALIX.3 LEDs. Signed-off-by: Constantin Baranov <const@mimas.ru> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
* Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-ledsLinus Torvalds2008-10-231-4/+21
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds: leds/acpi: Fix merge fallout from acpi_driver_data change leds: Simplify logic in leds-ams-delta leds: Fix trigger registration race leds: Fix leds-class.c comment leds: Add driver for HP harddisk protection LEDs leds: leds-pca955x - Mark pca955x_led_set() static leds: Remove uneeded leds-cm-x270 driver leds: Remove uneeded strlen calls leds: Add leds-wrap default-trigger leds: Make default trigger fields const leds: Add backlight LED trigger leds: da903x: Add support for LEDs found on DA9030/DA9034
| * leds: Add driver for HP harddisk protection LEDsPavel Machek2008-10-201-0/+7
| | | | | | | | | | | | | | | | | | HP notebooks contain accelerometer-based disk protection subsystem, and LED that indicates hard disk is protected. This is driver for the LED part. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
| * leds: Remove uneeded leds-cm-x270 driverRichard Purdie2008-10-201-6/+0
| | | | | | | | | | | | | | The cm-x270 board uses leds-gpio so remove the now unneeded driver. Acked-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
| * leds: Add backlight LED triggerRodolfo Giometti2008-10-201-0/+9
| | | | | | | | | | | | | | | | | | | | This allows LEDs to be controlled as a backlight device where they turn off and on when the display is blanked and unblanked. This is useful where you need various key backlight LEDs to dim at the same time as the backlight. Signed-off-by: Rodolfo Giometti <giometti@linux.it> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
| * leds: da903x: Add support for LEDs found on DA9030/DA9034Mike Rapoport2008-10-201-0/+7
| | | | | | | | | | | | Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
* | ide: add generic ATA/ATAPI disk driverBartlomiej Zolnierkiewicz2008-10-171-1/+1
|/ | | | | | | | | | | | | | | | * Add struct ide_disk_ops containing protocol specific methods. * Add 'struct ide_disk_ops *' to ide_drive_t. * Convert ide-{disk,floppy} drivers to use struct ide_disk_ops. * Merge ide-{disk,floppy} drivers into generic ide-gd driver. While at it: - ide_disk_init_capacity() -> ide_disk_get_capacity() Acked-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* Merge branch 'master' of ↵David S. Miller2008-10-111-14/+0
|\ | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: sound/core/memalloc.c
| * [ARM] pxa/spitz: use leds-gpio for led driving and drop leds-spitzEric Miao2008-09-231-7/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | Now as the scoop pins are covered by the generic gpio API, we can use leds-gpio driver instead of special leds-spitz Drop leds-spitz.c and the declarations of now un-referenced spitzscoop_device, spitzscoop2_device. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * [ARM] pxa/corgi: use leds-gpio for led driving and drop leds-corgiEric Miao2008-09-231-7/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | Now as the scoop pins are covered by the generic gpio API, we can use leds-gpio driver instead of special leds-corgi Drop leds-corgi.c and remove the declaration of now un-referenced corgiscoop_device. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | leds: Add driver for Sunfire UltraSPARC server LEDs.David S. Miller2008-08-311-0/+8
|/ | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* leds: Add support for Philips PCA955x I2C LED driversNate Case2008-07-231-0/+8
| | | | | | | | | This driver supports the PCA9550, PCA9551, PCA9552, and PCA9553 LED driver chips. Signed-off-by: Nate Case <ncase@xes-inc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
* leds: Add pca9532 led driverRiku Voipio2008-07-231-0/+8
| | | | | | | | | | | | | | | NXP pca9532 is a LED dimmer/controller attached to i2c bus. It allows attaching upto 16 leds which can either be on, off or dimmed and/or blinked with the two PWM modulators available. This driver is a "new-style" i2c driver that adheres to the driver model and implements the led framework api. Since the leds connected to the driver are platform specific, it is only useful when platform data is passed to the driver to define what leds are connected to which pins. Signed-off-by: Riku Voipio <riku.voipio@iki.fi> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
* leds: Add default-on triggerNick Forbes2008-04-251-0/+7
| | | | | | | | Add a trigger which allows LEDs to default to the full brightness state. Signed-off-by: Nick Forbes <Nick.Forbes@huntsworth.com> Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
OpenPOWER on IntegriCloud