summaryrefslogtreecommitdiffstats
path: root/drivers/isdn/capi
Commit message (Collapse)AuthorAgeFilesLines
* isdn/capi: don't return NULL from capi_cmd2str()Tilman Schmidt2014-10-141-2/+7
| | | | | | | | | | capi_cmd2str() is used in many places to build log messages. None of them is prepared to handle NULL as a result. Change the function to return printable string "INVALID_COMMAND" instead. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
* isdn/capi: handle CAPI 2.0 message parser failuresTilman Schmidt2014-10-141-4/+20
| | | | | | | | Have callers of capi_cmsg2message and capi_message2cmsg handle non-zero return values indicating failure. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
* isdn/capi: prevent NULL pointer dereference on invalid CAPI commandTilman Schmidt2014-10-141-0/+7
| | | | | | | | | | An invalid CAPI 2.0 command/subcommand combination may retrieve a NULL pointer from the cpars[] array which will later be dereferenced by the parser routines. Fix by adding NULL pointer checks in strategic places. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
* isdn/capi: refactor command/subcommand table accessesTilman Schmidt2014-10-141-5/+18
| | | | | | | | Encapsulate accesses to the CAPI 2.0 command/subcommand name and parameter tables in a single place in preparation for redesign. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
* isdn/capi: prevent index overrun from command_2_index()Tilman Schmidt2014-10-141-0/+2
| | | | | | | | | | | | | | The result of the function command_2_index() is used to index two arrays mnames[] and cpars[] with max. index 0x4e but in its current form that function can produce results up to 3*(0x9+0x9)+0x7f = 0xb5. Fix by clamping all result values potentially overrunning the arrays to zero which is already handled as an invalid value. Re-spotted with Coverity. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
* isdn/capi: correct capi20_manufacturer argument type mismatchTilman Schmidt2014-10-141-2/+2
| | | | | | | | | | | | Function capi20_manufacturer() is declared with unsigned int cmd argument but called with unsigned long. Fix by correcting the function prototype since the actual argument is part of the user visible API. Spotted with Coverity. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
* isdn/capi: drop two dead if branchesTilman Schmidt2014-10-051-3/+0
| | | | | | | | | | The last branch in command_2_index() cannot be reached since c==0xff is already caught by the first "if". The empty second branch makes no difference since no other branch will be taken for c<0x0f. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
* CAPI: use correct structure type name in sizeofJulia Lawall2014-07-301-1/+1
| | | | | | | | | | | | Correct typo in the name of the type given to sizeof. Because it is the size of a pointer that is wanted, the typo has no impact on compilation or execution. This problem was found using Coccinelle (http://coccinelle.lip6.fr/). The semantic patch used can be found in message 0 of this patch series. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
* isdn/capi: fix (middleware) device nodesPaul Bolle2014-06-042-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since v2.4 the capi driver used the following device nodes if "middleware" support was enabled: /dev/capi20 /dev/capi/0 /dev/capi/1 [...] /dev/capi20 is a character device node. /dev/capi/0 (and up) are tty device nodes (with a different major). This device node (naming) scheme is not documented anywhere, as far as I know. It was originally provided by the capifs pseudo filesystem (before udev became available). It is required for example by the pppd capiplugin. It was supported until a few years ago. But a number of developments broke it: - v2.6.6 (May 2004) renamed /dev/capi20 to /dev/capi and removed the "/" from the name of capi's tty driver. The explanation of the patch that did this included two examples of udev rules "to restore the old namespace"; - either udev 154 (May 2010) or udev 179 (January 2012) stopped allowing to rename device nodes, and thus the ability to have /dev/capi20 appear instead of /dev/capi and /dev/capi/0 (and up) instead of /dev/capi0 (and up); - v3.0 (July 2011) also removed capifs. That disabled another method to create the /dev/capi/0 (and up) device nodes. So now users need to manually tweak their setup (eg, create /dev/capi/ and fill that with symlinks) to get things working. This is all rather hacky and only discoverable by searching the web. Fix all this by renaming /dev/capi back to /dev/capi20, and by setting the name of the "capi_nc" tty driver to "capi!" so the tty device nodes appear as /dev/capi/0 (and up). Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Tilman Schmidt <tilman@imap.cc> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* isdn/capi: Make verbose reporting depend on capidrvPaul Bolle2014-06-042-9/+9
| | | | | | | | | | | | | | | | The Kconfig symbol ISDN_DRV_AVMB1_VERBOSE_REASON is only used for capi_info2str(). That function is only used in capidrv.c. So setting it without setting ISDN_CAPI_CAPIDRV is pointless. Make it depend on ISDN_CAPI_CAPIDRV, rename it to ISDN_CAPI_CAPIDRV_VERBOSE and put its entry after ISDN_CAPI_CAPIDRV's entry. Since this symbol seems to be primarily used for debugging, keep it off by default. By now the last users of capidrv hopefully know all they need to know about the reasons for disconnecting. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
* isdn/capi: move capi_info2str to capidrv.cPaul Bolle2014-06-042-200/+195
| | | | | | | | | | | | | capi_info2str() is apparently meant to be of general utility. It is actually only used in capidrv.c. So move it from capiutil.c to capidrv.c and (obviously) stop exporting it. And, since we're touching this, merge the two versions of this function. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
* isdn/capi: Make Middleware depend on CAPI2.0Paul Bolle2014-03-181-9/+9
| | | | | | | | | | The Kconfig symbol ISDN_CAPI_MIDDLEWARE is only used in capi.c. Setting it without setting ISDN_CAPI_CAPI20 is therefor useless. Make it depend on ISDN_CAPI_CAPI20 and put its entry after ISDN_CAPI_CAPI20's entry. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
* isdn/kcapi: fix a small underflowDan Carpenter2013-05-201-3/+3
| | | | | | | | | | | | In get_capi_ctr_by_nr() and get_capi_appl_by_nr() the parameter comes from skb->data. The current code can underflow to one space before the start of the array. The sanity check isn't needed in __get_capi_appl_by_nr() but I changed it to match the others. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2013-05-011-2/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking updates from David Miller: "Highlights (1721 non-merge commits, this has to be a record of some sort): 1) Add 'random' mode to team driver, from Jiri Pirko and Eric Dumazet. 2) Make it so that any driver that supports configuration of multiple MAC addresses can provide the forwarding database add and del calls by providing a default implementation and hooking that up if the driver doesn't have an explicit set of handlers. From Vlad Yasevich. 3) Support GSO segmentation over tunnels and other encapsulating devices such as VXLAN, from Pravin B Shelar. 4) Support L2 GRE tunnels in the flow dissector, from Michael Dalton. 5) Implement Tail Loss Probe (TLP) detection in TCP, from Nandita Dukkipati. 6) In the PHY layer, allow supporting wake-on-lan in situations where the PHY registers have to be written for it to be configured. Use it to support wake-on-lan in mv643xx_eth. From Michael Stapelberg. 7) Significantly improve firewire IPV6 support, from YOSHIFUJI Hideaki. 8) Allow multiple packets to be sent in a single transmission using network coding in batman-adv, from Martin Hundebøll. 9) Add support for T5 cxgb4 chips, from Santosh Rastapur. 10) Generalize the VXLAN forwarding tables so that there is more flexibility in configurating various aspects of the endpoints. From David Stevens. 11) Support RSS and TSO in hardware over GRE tunnels in bxn2x driver, from Dmitry Kravkov. 12) Zero copy support in nfnelink_queue, from Eric Dumazet and Pablo Neira Ayuso. 13) Start adding networking selftests. 14) In situations of overload on the same AF_PACKET fanout socket, or per-cpu packet receive queue, minimize drop by distributing the load to other cpus/fanouts. From Willem de Bruijn and Eric Dumazet. 15) Add support for new payload offset BPF instruction, from Daniel Borkmann. 16) Convert several drivers over to mdoule_platform_driver(), from Sachin Kamat. 17) Provide a minimal BPF JIT image disassembler userspace tool, from Daniel Borkmann. 18) Rewrite F-RTO implementation in TCP to match the final specification of it in RFC4138 and RFC5682. From Yuchung Cheng. 19) Provide netlink socket diag of netlink sockets ("Yo dawg, I hear you like netlink, so I implemented netlink dumping of netlink sockets.") From Andrey Vagin. 20) Remove ugly passing of rtnetlink attributes into rtnl_doit functions, from Thomas Graf. 21) Allow userspace to be able to see if a configuration change occurs in the middle of an address or device list dump, from Nicolas Dichtel. 22) Support RFC3168 ECN protection for ipv6 fragments, from Hannes Frederic Sowa. 23) Increase accuracy of packet length used by packet scheduler, from Jason Wang. 24) Beginning set of changes to make ipv4/ipv6 fragment handling more scalable and less susceptible to overload and locking contention, from Jesper Dangaard Brouer. 25) Get rid of using non-type-safe NLMSG_* macros and use nlmsg_*() instead. From Hong Zhiguo. 26) Optimize route usage in IPVS by avoiding reference counting where possible, from Julian Anastasov. 27) Convert IPVS schedulers to RCU, also from Julian Anastasov. 28) Support cpu fanouts in xt_NFQUEUE netfilter target, from Holger Eitzenberger. 29) Network namespace support for nf_log, ebt_log, xt_LOG, ipt_ULOG, nfnetlink_log, and nfnetlink_queue. From Gao feng. 30) Implement RFC3168 ECN protection, from Hannes Frederic Sowa. 31) Support several new r8169 chips, from Hayes Wang. 32) Support tokenized interface identifiers in ipv6, from Daniel Borkmann. 33) Use usbnet_link_change() helper in USB net driver, from Ming Lei. 34) Add 802.1ad vlan offload support, from Patrick McHardy. 35) Support mmap() based netlink communication, also from Patrick McHardy. 36) Support HW timestamping in mlx4 driver, from Amir Vadai. 37) Rationalize AF_PACKET packet timestamping when transmitting, from Willem de Bruijn and Daniel Borkmann. 38) Bring parity to what's provided by /proc/net/packet socket dumping and the info provided by netlink socket dumping of AF_PACKET sockets. From Nicolas Dichtel. 39) Fix peeking beyond zero sized SKBs in AF_UNIX, from Benjamin Poirier" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1722 commits) filter: fix va_list build error af_unix: fix a fatal race with bit fields bnx2x: Prevent memory leak when cnic is absent bnx2x: correct reading of speed capabilities net: sctp: attribute printl with __printf for gcc fmt checks netlink: kconfig: move mmap i/o into netlink kconfig netpoll: convert mutex into a semaphore netlink: Fix skb ref counting. net_sched: act_ipt forward compat with xtables mlx4_en: fix a build error on 32bit arches Revert "bnx2x: allow nvram test to run when device is down" bridge: avoid OOPS if root port not found drivers: net: cpsw: fix kernel warn on cpsw irq enable sh_eth: use random MAC address if no valid one supplied 3c509.c: call SET_NETDEV_DEV for all device types (ISA/ISAPnP/EISA) tg3: fix to append hardware time stamping flags unix/stream: fix peeking with an offset larger than data in queue unix/dgram: fix peeking with an offset larger than data in queue unix/dgram: peek beyond 0-sized skbs openvswitch: Remove unneeded ovs_netdev_get_ifindex() ...
| * driver: isdn: capi: remove cast for kmalloc return valueZhang Yanfei2013-03-121-2/+1
| | | | | | | | | | | | | | | | | | | | remove cast for kmalloc return value. Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
* | TTY: add tty_port_tty_wakeup helperJiri Slaby2013-03-181-6/+1
|/ | | | | | | | | | | | It allows for cleaning up on a considerable amount of places. They did port_get, wakeup, kref_put. Now the only thing needed is to call tty_port_tty_wakeup which does exactly that. One exception is ifx6x60 where tty_wakeup was open-coded. We now call tty_wakeup properly there. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tty: Added a CONFIG_TTY option to allow removal of TTYJoe Millenbach2013-01-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The option allows you to remove TTY and compile without errors. This saves space on systems that won't support TTY interfaces anyway. bloat-o-meter output is below. The bulk of this patch consists of Kconfig changes adding "depends on TTY" to various serial devices and similar drivers that require the TTY layer. Ideally, these dependencies would occur on a common intermediate symbol such as SERIO, but most drivers "select SERIO" rather than "depends on SERIO", and "select" does not respect dependencies. bloat-o-meter output comparing our previous minimal to new minimal by removing TTY. The list is filtered to not show removed entries with awk '$3 != "-"' as the list was very long. add/remove: 0/226 grow/shrink: 2/14 up/down: 6/-35356 (-35350) function old new delta chr_dev_init 166 170 +4 allow_signal 80 82 +2 static.__warned 143 142 -1 disallow_signal 63 62 -1 __set_special_pids 95 94 -1 unregister_console 126 121 -5 start_kernel 546 541 -5 register_console 593 588 -5 copy_from_user 45 40 -5 sys_setsid 128 120 -8 sys_vhangup 32 19 -13 do_exit 1543 1526 -17 bitmap_zero 60 40 -20 arch_local_irq_save 137 117 -20 release_task 674 652 -22 static.spin_unlock_irqrestore 308 260 -48 Signed-off-by: Joe Millenbach <jmillenbach@gmail.com> Reviewed-by: Jamey Sharp <jamey@minilop.net> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ISDN: capi, use kref from tty_portJiri Slaby2012-11-151-19/+17
| | | | | | | | | | | | | After commit "TTY: move tty buffers to tty_port", the tty buffers are not freed in some drivers. This is because tty_port_destructor is not called whenever a tty_port is freed. This was an assumption I counted with but was unfortunately untrue. So fix the drivers to fulfil this assumption. Here it is enough to switch to refcounting in tty_port. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* TTY: use tty_port_register_deviceJiri Slaby2012-08-131-1/+2
| | | | | | | | | | | | | | | | | Currently we have no way to assign tty->port while performing tty installation. There are two ways to provide the link tty_struct => tty_port. Either by calling tty_port_install from tty->ops->install or tty_port_register_device called instead of tty_register_device when the device is being set up after connected. In this patch we modify most of the drivers to do the latter. When the drivers use tty_register_device and we have tty_port already, we switch to tty_port_register_device. So we have the tty_struct => tty_port link for free for those. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* isdn/capi: elliminate capincci_find() in non-middleware caseTilman Schmidt2012-05-071-14/+13
| | | | | | | | | If Kernel CAPI is compiled without CONFIG_ISDN_CAPI_MIDDLEWARE, the structure retrieved via capincci_find() is never actually used, so don't compile that function in that case. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
* isdn/capi: fix readability damageTilman Schmidt2012-05-072-19/+12
| | | | | | | | Fix up some of the readibility deterioration caused by the recent whitespace coding style cleanup. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2012-03-208-982/+981
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking merge from David Miller: "1) Move ixgbe driver over to purely page based buffering on receive. From Alexander Duyck. 2) Add receive packet steering support to e1000e, from Bruce Allan. 3) Convert TCP MD5 support over to RCU, from Eric Dumazet. 4) Reduce cpu usage in handling out-of-order TCP packets on modern systems, also from Eric Dumazet. 5) Support the IP{,V6}_UNICAST_IF socket options, making the wine folks happy, from Erich Hoover. 6) Support VLAN trunking from guests in hyperv driver, from Haiyang Zhang. 7) Support byte-queue-limtis in r8169, from Igor Maravic. 8) Outline code intended for IP_RECVTOS in IP_PKTOPTIONS existed but was never properly implemented, Jiri Benc fixed that. 9) 64-bit statistics support in r8169 and 8139too, from Junchang Wang. 10) Support kernel side dump filtering by ctmark in netfilter ctnetlink, from Pablo Neira Ayuso. 11) Support byte-queue-limits in gianfar driver, from Paul Gortmaker. 12) Add new peek socket options to assist with socket migration, from Pavel Emelyanov. 13) Add sch_plug packet scheduler whose queue is controlled by userland daemons using explicit freeze and release commands. From Shriram Rajagopalan. 14) Fix FCOE checksum offload handling on transmit, from Yi Zou." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1846 commits) Fix pppol2tp getsockname() Remove printk from rds_sendmsg ipv6: fix incorrent ipv6 ipsec packet fragment cpsw: Hook up default ndo_change_mtu. net: qmi_wwan: fix build error due to cdc-wdm dependecy netdev: driver: ethernet: Add TI CPSW driver netdev: driver: ethernet: add cpsw address lookup engine support phy: add am79c874 PHY support mlx4_core: fix race on comm channel bonding: send igmp report for its master fs_enet: Add MPC5125 FEC support and PHY interface selection net: bpf_jit: fix BPF_S_LDX_B_MSH compilation net: update the usage of CHECKSUM_UNNECESSARY fcoe: use CHECKSUM_UNNECESSARY instead of CHECKSUM_PARTIAL on tx net: do not do gso for CHECKSUM_UNNECESSARY in netif_needs_gso ixgbe: Fix issues with SR-IOV loopback when flow control is disabled net/hyperv: Fix the code handling tx busy ixgbe: fix namespace issues when FCoE/DCB is not enabled rtlwifi: Remove unused ETH_ADDR_LEN defines igbvf: Use ETH_ALEN ... Fix up fairly trivial conflicts in drivers/isdn/gigaset/interface.c and drivers/net/usb/{Kconfig,qmi_wwan.c} as per David.
| * ppp: Replace uses of <linux/if_ppp.h> with <linux/ppp-ioctl.h>Paul Mackerras2012-03-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Since all that include/linux/if_ppp.h does is #include <linux/ppp-ioctl.h>, this replaces the occurrences of #include <linux/if_ppp.h> with #include <linux/ppp-ioctl.h>. It also corrects an error in Documentation/networking/l2tp.txt, where it referenced include/linux/if_ppp.h as the source of some definitions that are actually now defined in include/linux/if_pppol2tp.h. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * isdn: whitespace coding style cleanupJoe Perches2012-02-218-981/+980
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | isdn source code uses a not-current coding style. Update the coding style used on a per-line basis so that git diff -w shows only elided blank lines at EOF. Done with emacs and some scripts and some typing. Built x86 allyesconfig. No detected change in objdump -d or size. Signed-off-by: Joe Perches <joe@perches.com>
* | TTY: remove unneeded tty->index checksJiri Slaby2012-03-081-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Checking if tty->index is in bounds is not needed. The tty has the index set in the initial open. This is done in get_tty_driver. And it can be only in interval <0,driver->num). So remove the tests which check exactly this interval. Some are left untouched as they check against the current backing device count. (Leaving apart that the check is racy in most of the cases.) Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | TTY: remove re-assignments to tty_driver membersJiri Slaby2012-03-081-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | All num, magic and owner are set by alloc_tty_driver. No need to re-set them on each allocation site. pti driver sets something different to what it passes to alloc_tty_driver. It is not a bug, since we don't use the lines parameter in any way. Anyway this is fixed, and now we do the right thing. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | TTY: use tty_standard_installJiri Slaby2012-02-021-6/+3
|/ | | | | | | | | Use the helper in the rest of the tty drivers. This is a simple replacement. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drivers/isdn: Add export.h for EXPORT_SYMBOL/THIS_MODULE as required.Paul Gortmaker2011-10-311-0/+1
| | | | | | | In preparation of the module.h usage cleanup, call out the header that we need to get EXPORT_SYMBOL variants and THIS_MODULE into scope. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* isdn: capi: Use pr_debug() instead of ifdefs.David S. Miller2011-05-191-83/+32
| | | | | | | | | | I was investigating some warnings that spew because of the _DEBUG_FOO ifdef'ery in here. Instead of adding more ifdefs to fix that warning, let's use pr_debug() and get rid of these CPP checks altogether. Signed-off-by: David S. Miller <davem@davemloft.net>
* capi: Perform scheduled capifs removalJan Kiszka2011-04-065-303/+4
| | | | | | | | | udev fully replaces this special file system that only contains CAPI NCCI TTY device nodes. User space (pppdcapiplugin) works without noticing the difference. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* tty: now phase out the ioctl file pointer for goodAlan Cox2011-02-171-8/+2
| | | | | | | | | Only oddities here are a couple of drivers that bogusly called the ldisc helpers instead of returning -ENOIOCTLCMD. Fix the bug and the rest goes away. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* isdn/capi: make kcapi use a separate workqueueTejun Heo2010-12-241-8/+18
| | | | | | | | | | | | flush_scheduled_work() is deprecated and will be removed. Because kcapi uses fire-and-forget type works, it's impossible to flush each work explicitly. Create and use a dedicated workqueue instead. Please note that with recent workqueue changes, each workqueue doesn't reserve a lot of resources and using it as a flush domain is fine. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Jan Kiszka <jan.kiszka@web.de>
* isdn/capi: unregister capictr notifier after init failureTejun Heo2010-12-241-0/+1
| | | | | | | | capidrv_init() could leave capictr notifier dangling after init failure. Fix it. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Jan Kiszka <jan.kiszka@web.de>
* convert get_sb_single() usersAl Viro2010-10-291-4/+4
| | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* CAPI: Silence lockdep warning on get_capi_appl_by_nr usageJan Kiszka2010-10-211-5/+14
| | | | | | | | | | | As long as we hold capi_controller_lock, we can safely access capi_applications without RCU protection as no one can modify the application list underneath us. Introduce an RCU-free __get_capi_appl_by_nr for this purpose. This silences lockdep warnings on suspicious rcu_dereference usage. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers: isdn: capi: use simple_strtol to convert numbersAndy Shevchenko2010-09-081-4/+13
| | | | | | | | Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Tilman Schmidt <tilman@imap.cc> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers: isdn: use kernel macros to convert hex digitAndy Shevchenko2010-07-151-5/+2
| | | | | | | | Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Tilman Schmidt <tilman@imap.cc> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/isdn: Remove unnecessary casts of private_dataJoe Perches2010-07-121-3/+3
| | | | | Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* isdn: autoconvert trivial BKL users to private mutexArnd Bergmann2010-07-121-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All these files use the big kernel lock in a trivial way to serialize their private file operations, typically resulting from an earlier semi-automatic pushdown from VFS. None of these drivers appears to want to lock against other code, and they all use the BKL as the top-level lock in their file operations, meaning that there is no lock-order inversion problem. Consequently, we can remove the BKL completely, replacing it with a per-file mutex in every case. Using a scripted approach means we can avoid typos. file=$1 name=$2 if grep -q lock_kernel ${file} ; then if grep -q 'include.*linux.mutex.h' ${file} ; then sed -i '/include.*<linux\/smp_lock.h>/d' ${file} else sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file} fi sed -i ${file} \ -e "/^#include.*linux.mutex.h/,$ { 1,/^\(static\|int\|long\)/ { /^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex); } }" \ -e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \ -e '/[ ]*cycle_kernel_lock();/d' else sed -i -e '/include.*\<smp_lock.h\>/d' ${file} \ -e '/cycle_kernel_lock()/d' fi Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
* isdn/kcapi: return -EFAULT on copy_from_user errorsDan Carpenter2010-06-031-3/+3
| | | | | | | | | | copy_from_user() returns the number of bytes remaining but we should return -EFAULT here. The error code gets returned to the user. Both old_capi_manufacturer() and capi20_manufacturer() had other places that already returned -EFAULT so this won't break anything. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2010-05-251-0/+6
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (63 commits) drivers/net/usb/asix.c: Fix pointer cast. be2net: Bug fix to avoid disabling bottom half during firmware upgrade. proc_dointvec: write a single value hso: add support for new products Phonet: fix potential use-after-free in pep_sock_close() ath9k: remove VEOL support for ad-hoc ath9k: change beacon allocation to prefer the first beacon slot sock.h: fix kernel-doc warning cls_cgroup: Fix build error when built-in macvlan: do proper cleanup in macvlan_common_newlink() V2 be2net: Bug fix in init code in probe net/dccp: expansion of error code size ath9k: Fix rx of mcast/bcast frames in PS mode with auto sleep wireless: fix sta_info.h kernel-doc warnings wireless: fix mac80211.h kernel-doc warnings iwlwifi: testing the wrong variable in iwl_add_bssid_station() ath9k_htc: rare leak in ath9k_hif_usb_alloc_tx_urbs() ath9k_htc: dereferencing before check in hif_usb_tx_cb() rt2x00: Fix rt2800usb TX descriptor writing. rt2x00: Fix failed SLEEP->AWAKE and AWAKE->SLEEP transitions. ...
| * isdn/capi: make reset_ctr op truly optionalTilman Schmidt2010-05-231-0/+6
| | | | | | | | | | | | | | | | | | | | The CAPI controller operation reset_ctr is marked as optional, and not all drivers do implement it. Add a check to the kernel CAPI whether it exists before trying to call it. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Acked-by: Karsten Keil <isdn@linux-pingi.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* | isdn: Push down BKL into ioctl functionsArnd Bergmann2010-05-171-3/+14
|/ | | | | | | | | | Push down bkl into isdn ioctl functions [fweisbec: dropped drivers/isdn/divert/divert_procfs.c as it has been pushed down in procfs branch already] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
* include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-304-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* CAPI: Remove experimental tag from middleware featureJan Kiszka2010-02-161-2/+1
| | | | | | | | | | Despite all its bugs, the middleware support of our CAPI stack was already in use for many, many moons. And after going through its code, fixing all issues I found, I feel it deserves to officially become a non-experimental feature. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* CAPI: Schedule capifs for removalJan Kiszka2010-02-161-6/+7
| | | | | | | | | | | With dynamic TTY nodes and the help of udev, we no longer need this special filesystem. Schedule it for removal in one year from now. As a last duty to this feature, move its help to right option so that users can read the rationale. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* CAPI: Drop special controller lookup from capi20_put_messageJan Kiszka2010-02-161-5/+2
| | | | | | | | | | | This strange special rule to fall back to controller 1 cannot be derived from the CAPI specs and looks a lot like it was once dedicated to some out-of-tree driver, probably AVM's broken fcdsl2 (FRITZ!Card DSL v2.0). I found no in-tree user that needs this check, and I'm now taking care of the fcdsl2. So drop these bits from our stack. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* CAPI: Drop return value of handle_minor_sendJan Kiszka2010-02-161-13/+9
| | | | | | | | We did not evaluate handle_minor_send's return value, just (void)'ed it away. Time for a cleanup. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* CAPI: Clean up capiminor_*_ackJan Kiszka2010-02-161-12/+7
| | | | | | | | | No need for irqsave acquisition of acklock, bh-safe is sufficient. Moverover, move kfree out of the lock and do not take acklock at all in capiminor_del_all_ack as we are the last user of the list here. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* CAPI: Fix locking around capiminor's output queue and drop workaround_lockJan Kiszka2010-02-161-59/+67
| | | | | | | | | | | | | | Introduce outlock as a spin lock that protects capiminor's outqueue, outbytes and outskb (formerly known as ttyskb). outlock can be acquired from soft-IRQ context via capinc_write, so make it bh-safe. This finally removes the last reason for keeping the workaround lock around (which was incomplete and partly broken anyway). And as we no longer call handle_recv_skb in atomic context, gen_data_b3_resp_for can use non-atomic allocation now. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
OpenPOWER on IntegriCloud