summaryrefslogtreecommitdiffstats
path: root/drivers/input/serio
Commit message (Collapse)AuthorAgeFilesLines
* Input: i8042 - add TUXEDO BU1406 (N24_25BU) to the nomux listDmitry Torokhov2017-03-101-0/+7
| | | | | | | | | | | | TUXEDO BU1406 does not implement active multiplexing mode properly, and takes around 550 ms in i8042_set_mux_mode(). Given that the device does not have external AUX port, there is no downside in disabling the MUX mode. Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Suggested-by: Vojtech Pavlik <vojtech@suse.cz> Reviewed-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: i8042 - add noloop quirk for Dell Embedded Box PC 3000Kai-Heng Feng2017-03-071-0/+7
| | | | | | | | | | | | The aux port does not get detected without noloop quirk, so external PS/2 mouse cannot work as result. The PS/2 mouse can work with this quirk. BugLink: https://bugs.launchpad.net/bugs/1591053 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Reviewed-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Merge tag 'v4.10-rc5' into nextDmitry Torokhov2017-01-244-6/+23
|\ | | | | | | Sync up with mainline to bring up improvements in various subsystems.
| * Merge branch 'for-linus' of ↵Linus Torvalds2017-01-131-0/+6
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "Small driver fixups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elants_i2c - avoid divide by 0 errors on bad touchscreen data Input: adxl34x - make it enumerable in ACPI environment Input: ALPS - fix TrackStick Y axis handling for SS5 hardware Input: synaptics-rmi4 - fix F03 build error when serio is module Input: xpad - use correct product id for x360w controllers Input: synaptics_i2c - change msleep to usleep_range for small msecs Input: i8042 - add Pegatron touchpad to noloop table Input: joydev - remove unused linux/miscdevice.h include
| | * Input: i8042 - add Pegatron touchpad to noloop tableMarcos Paulo de Souza2016-12-181-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Avoid AUX loopback in Pegatron C15B touchpad, so input subsystem is able to recognize a Synaptics touchpad in the AUX port. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=93791 (Touchpad is not detected on DNS 0801480 notebook (PEGATRON C15B)) Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * | Replace <asm/uaccess.h> with <linux/uaccess.h> globallyLinus Torvalds2016-12-243-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | Input: i8042 - Trust firmware a bit more when probing on X86Dmitry Torokhov2016-12-191-3/+7
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The error message "Can't read CTR while initializing i8042" appears on Cherry Trail-based devices at each boot time: i8042: PNP: No PS/2 controller found. Probing ports directly. i8042: Can't read CTR while initializing i8042 i8042: probe of i8042 failed with error -5 This happens because we historically do not trust firmware on X86 and, while noting that PNP does not show keyboard or mouse devices, we still charge ahead and try to probe the controller. Let's relax this a bit and if results of PNP probe agree with the results of platform initialization/quirks conclude that there is, in fact, no i8042. While at it, let's avoid using x86_platform.i8042_detect() and instead abort execution early if platform indicates that it can not possibly have i8042 (x86_platform.legacy.i8042 equals X86_LEGACY_I8042_PLATFORM_ABSENT). Reported-and-tested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com> Cc: linux-input@vger.kernel.org Link: http://lkml.kernel.org/r/1481317061-31486-3-git-send-email-dmitry.torokhov@gmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
| * Merge branch 'next' into for-linusDmitry Torokhov2016-12-162-76/+4
| |\ | | | | | | | | | Prepare input updates for 4.10 merge window.
| * | Input: i8042 - add XMG C504 to keyboard reset tablePatrick Scheuring2016-10-191-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Schenker XMG C504 is a rebranded Gigabyte P35 v2 laptop. Therefore it also needs a keyboard reset to detect the Elantech touchpad. Otherwise the touchpad appears to be dead. With this patch the touchpad is detected: $ dmesg | grep -E "(i8042|Elantech|elantech)" [ 2.675399] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.680372] i8042: Attempting to reset device connected to KBD port [ 2.789037] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.791586] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.813840] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 3.811431] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x361f0e) [ 3.825424] psmouse serio1: elantech: Synaptics capabilities query result 0x00, 0x15, 0x0f. [ 3.839424] psmouse serio1: elantech: Elan sample query result 03, 58, 74 [ 3.911349] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6 Signed-off-by: Patrick Scheuring <patrick.scheuring.dev@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * | Merge branch 'next' into for-linusDmitry Torokhov2016-10-137-19/+142
| |\ \ | | | | | | | | | | | | Prepare second round of input updates for 4.9 merge window.
| * \ \ Merge branch 'next' into for-linusDmitry Torokhov2016-10-031-3/+14
| |\ \ \ | | | | | | | | | | | | | | | Prepare first round of input updates for 4.9 merge window.
* | | | | Input: i8042 - add dbg msg when a command can't write its parameterMarcos Paulo de Souza2017-01-221-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This can happen in cases like bug #102951[1], so add a proper debug msg as done in wait_read. Also, change wait_read debug message to differ from wait_write. [1] https://bugzilla.kernel.org/show_bug.cgi?id=102951 Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | | | Input: serio - drop unnecessary calls to device_init_wakeupGuenter Roeck2017-01-211-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Calling device_init_wakeup in the remove function is unnecessary since the device is going away, and thus won't be able to cause any wakeups under any circumstances. Besides, the driver cleanup code already handles the necessary cleanup. Similarly, disabling wakeup in the probe error path is unnecessary, as is disabling wakeup in the probe function in the first place. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | | | Input: xilinx_ps2 - use 'dev' instead of dereferencing itGuenter Roeck2017-01-181-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use local variable 'dev' instead of dereferencing it several times. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | | | Input: at32psif - drop unnecessary error messages and other changesGuenter Roeck2017-01-181-9/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Error messages after memory allocation failures are unnecessary and can be dropped, given that they are emitted as dev_dbg() so nobody except person actively debugging the driver would see them. Also replace jump to return 'goto l; ... l: return e;' with 'return e;' Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | | | Input: i8042 - force synchronous probing of PNP driversDmitry Torokhov2016-12-181-0/+8
| |_|_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We rely on the result of scanning PNP bus for keyboard and mouse devices to decide whether we should continue initialization of i8042 driver or not, so the probes can not be asynchronous. Also, it is not a good idea to unbind either of the PNP devices while i8042 is running, so let's disable bind/unbind for the PNP drivers through sysfs and rely on i8042 cleaning after itself properly. User can still unbind and rebind entire i8042 and that will take care of PNP drivers as well. Reviewed-by: Luis R. Rodriguez <mgrof@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | | Input: i8042 - comment #else/#endif of CONFIG_PNPMarcos Paulo de Souza2016-12-121-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | As this define check if huge, this makes easier to read the code. Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | | Input: i8042 - fix typo from i8042_aux_close to i8042_port_closeMarcos Paulo de Souza2016-11-221-1/+1
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | | Input: i8042 - use chassis info to skip selftest on Asus laptopsMarcos Paulo de Souza2016-10-211-73/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of relying on this model zoo let's skip selftest on all newer Asus laptops (newer as in when they changed "Computer" -> "COMPUTER" in their DMI data). Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | | Merge tag 'v4.8' into nextDmitry Torokhov2016-10-131-0/+1
|\ \ \ \ | |/ / / | | | / | |_|/ |/| | Sync up with mainline to bring in I2C host notify changes and other updates.
| * | Input: i8042 - set up shared ps2_cmd_mutex for AUX portsDmitry Torokhov2016-08-191-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The commit 4097461897df ("Input: i8042 - break load dependency ...") correctly set up ps2_cmd_mutex pointer for the KBD port but forgot to do the same for AUX port(s), which results in communication on KBD and AUX ports to clash with each other. Fixes: 4097461897df ("Input: i8042 - break load dependency ...") Reported-by: Bruno Wolff III <bruno@wolff.to> Tested-by: Bruno Wolff III <bruno@wolff.to> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | Input: i8042 - skip selftest on ASUS laptopsMarcos Paulo de Souza2016-10-117-19/+142
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On suspend/resume cycle, selftest is executed to reset i8042 controller. But when this is done in Asus devices, subsequent calls to detect/init functions to elantech driver fails. Skipping selftest fixes this problem. An easier step to reproduce this problem is adding i8042.reset=1 as a kernel parameter. On Asus laptops, it'll make the system to start with the touchpad already stuck, since psmouse_probe forcibly calls the selftest function. This patch was inspired by John Hiesey's change[1], but, since this problem affects a lot of models of Asus, let's avoid running selftests on them. All models affected by this problem: A455LD K401LB K501LB K501LX R409L V502LX X302LA X450LCP X450LD X455LAB X455LDB X455LF Z450LA [1]: https://marc.info/?l=linux-input&m=144312209020616&w=2 Fixes: "ETPS/2 Elantech Touchpad dies after resume from suspend" (https://bugzilla.kernel.org/show_bug.cgi?id=107971) Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | Input: serio - add hangup supportHans Verkuil2016-09-211-3/+14
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Pulse-Eight USB CEC adapter is a usb device that shows up as a ttyACM0 device. It requires that you run inputattach in order to communicate with it via serio. This all works well, but it would be nice to have a udev rule to automatically start inputattach. That too works OK, but the problem comes when the USB device is unplugged: the tty hangup is never handled by the serio framework so the inputattach utility never exits and you have to kill it manually. By adding this hangup callback the inputattach utility now properly exits as soon as the USB device is unplugged. The udev rule I used on my Debian sid system is: SUBSYSTEM=="tty", KERNEL=="ttyACM[0-9]*", ATTRS{idVendor}=="2548", ATTRS{idProduct}=="1002", ACTION=="add", TAG+="systemd", ENV{SYSTEMD_WANTS}+="pulse8-cec-inputattach@%k.service" And /etc/systemd/system/pulse8-cec-inputattach@.service is as follows: =============================================================== [Unit] Description=inputattach for pulse8-cec device on %I [Service] Type=simple ExecStart=/usr/local/bin/inputattach --pulse8-cec /dev/%I KillMode=process =============================================================== Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: i8042 - break load dependency between atkbd/psmouse and i8042Dmitry Torokhov2016-07-272-21/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | As explained in 1407814240-4275-1-git-send-email-decui@microsoft.com we have a hard load dependency between i8042 and atkbd which prevents keyboard from working on Gen2 Hyper-V VMs. > hyperv_keyboard invokes serio_interrupt(), which needs a valid serio > driver like atkbd.c. atkbd.c depends on libps2.c because it invokes > ps2_command(). libps2.c depends on i8042.c because it invokes > i8042_check_port_owner(). As a result, hyperv_keyboard actually > depends on i8042.c. > > For a Generation 2 Hyper-V VM (meaning no i8042 device emulated), if a > Linux VM (like Arch Linux) happens to configure CONFIG_SERIO_I8042=m > rather than =y, atkbd.ko can't load because i8042.ko can't load(due to > no i8042 device emulated) and finally hyperv_keyboard can't work and > the user can't input: https://bugs.archlinux.org/task/39820 > (Ubuntu/RHEL/SUSE aren't affected since they use CONFIG_SERIO_I8042=y) To break the dependency we move away from using i8042_check_port_owner() and instead allow serio port owner specify a mutex that clients should use to serialize PS/2 command stream. Reported-by: Mark Laws <mdl@60hz.org> Tested-by: Mark Laws <mdl@60hz.org> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: ams_delta_serio - fix spelling mistake: "paritiy" -> "parity"Colin Ian King2016-06-231-1/+1
| | | | | | trivial fix to spelling mistake in dev_warn message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Merge branch 'for-linus' of ↵Linus Torvalds2016-02-101-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "Just small driver fixups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: colibri-vf50-ts - add missing #include <linux/of.h> Input: adp5589 - fix row 5 handling for adp5589 Input: edt-ft5x06 - fix setting gain, offset, and threshold via device tree Input: vmmouse - fix absolute device registration Input: serio - drop warnings in case of EPROBE_DEFER from serio_find_driver() Input: cap11xx - add missing of_node_put Input: sirfsoc-onkey - allow modular build Input: xpad - remove unused function
| * Input: serio - drop warnings in case of EPROBE_DEFER from serio_find_driver()Grygorii Strashko2016-01-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now serio_find_driver() will print warnings in case device_attach() returns -EPROBE_DEFER. Those warnings are obsolete, in genral, because: - DD core can report the same if required - since commit 013c074f8642 ("PM / sleep: prohibit devices probing during suspend/hibernation") the devices probing is prohibited during System suspend and deferred device will be carefully reprobed once Resume is finished. Hence, drop warnings in case of EPROBE_DEFER from serio_find_driver(). Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | Merge branch 'for-linus' of ↵Linus Torvalds2016-01-131-0/+7
|\ \ | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - new driver for eGalaxTouch serial touchscreen - new driver for TS-4800 touchscreen - an update for Goodix touchscreen driver - PS/2 mouse module was reworked to limit number of protocols we try on pass-through ports to speed up their detection time - wacom_w8001 touchscreen driver now reports pen and touch via separate instances of input devices - other driver changes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (42 commits) Input: elantech - mark protocols v2 and v3 as semi-mt Input: wacom_w8001 - drop use of ABS_MT_TOOL_TYPE Input: gpio-keys - fix check for disabling unsupported keys Input: omap-keypad - remove dead check Input: ti_am335x_tsc - fix HWPEN interrupt handling Input: omap-keypad - set tasklet data earlier Input: rohm_bu21023 - fix handling of retrying firmware update Input: ALPS - report v3 pinnacle trackstick device only if is present Input: ALPS - detect trackstick presence for v7 protocol Input: pcap_ts - use to_delayed_work Input: bma150 - constify bma150_cfg structure Input: i8042 - add Fujitsu Lifebook U745 to the nomux list Input: egalax_ts_serial - fix potential NULL dereference on error Input: uinput - sanity check on ff_effects_max and EV_FF Input: uinput - rework ABS validation Input: uinput - add new UINPUT_DEV_SETUP and UI_ABS_SETUP ioctl Input: goodix - use "inverted_[xy]" flags instead of "rotated_screen" Input: goodix - add axis swapping and axis inversion support Input: goodix - use goodix_i2c_write_u8 instead of i2c_master_send Input: goodix - add power management support ...
| * Merge branch 'next' into for-linusDmitry Torokhov2016-01-111-5/+27
| |\ | | | | | | | | | Prepare first round of input updates for 4.5 merge window.
| * | Input: i8042 - add Fujitsu Lifebook U745 to the nomux listAurélien Francillon2016-01-021-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Without i8042.nomux=1 the Elantech touch pad is not working at all on a Fujitsu Lifebook U745. This patch does not seem necessary for all U745 (maybe because of different BIOS versions?). However, it was verified that the patch does not break those (see opensuse bug 883192: https://bugzilla.opensuse.org/show_bug.cgi?id=883192). Signed-off-by: Aurélien Francillon <aurelien@francillon.net> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | Merge tag 'char-misc-4.5-rc1' of ↵Linus Torvalds2016-01-131-10/+0
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc updates from Greg KH: "Here's the big set of char/misc patches for 4.5-rc1. Nothing major, lots of different driver subsystem updates, full details in the shortlog. All of these have been in linux-next for a while" * tag 'char-misc-4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (71 commits) mei: fix fasync return value on error parport: avoid assignment in if parport: remove unneeded space parport: change style of NULL comparison parport: remove unnecessary out of memory message parport: remove braces parport: quoted strings should not be split parport: code indent should use tabs parport: fix coding style parport: EXPORT_SYMBOL should follow function parport: remove trailing white space parport: fix a trivial typo coresight: Fix a typo in Kconfig coresight: checking for NULL string in coresight_name_match() Drivers: hv: vmbus: Treat Fibre Channel devices as performance critical Drivers: hv: utils: fix hvt_op_poll() return value on transport destroy Drivers: hv: vmbus: fix the building warning with hyperv-keyboard extcon: add Maxim MAX3355 driver Drivers: hv: ring_buffer: eliminate hv_ringbuffer_peek() Drivers: hv: remove code duplication between vmbus_recvpacket()/vmbus_recvpacket_raw() ...
| * | | Drivers: hv: vmbus: fix the building warning with hyperv-keyboardDexuan Cui2015-12-211-10/+0
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With the recent change af3ff643ea91ba64dd8d0b1cbed54d44512f96cd (Drivers: hv: vmbus: Use uuid_le type consistently), we always get this warning: CC [M] drivers/input/serio/hyperv-keyboard.o drivers/input/serio/hyperv-keyboard.c:427:2: warning: missing braces around initializer [-Wmissing-braces] { HV_KBD_GUID, }, ^ drivers/input/serio/hyperv-keyboard.c:427:2: warning: (near initialization for .id_table[0].guid.b.) [-Wmissing-braces] The patch fixes the warning. Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | Merge branch 'for-linus' of ↵Linus Torvalds2015-12-191-0/+1
|\ \ \ | |/ / |/| / | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "Just a few assorted driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elants_i2c - fix wake-on-touch Input: elan_i2c - set input device's vendor and product IDs Input: sun4i-lradc-keys - fix typo in binding documentation Input: atmel_mxt_ts - add maxtouch to I2C table for module autoload Input: arizona-haptic - fix disabling of haptics device Input: aiptek - fix crash on detecting device without endpoints Input: atmel_mxt_ts - add generic platform data for Chromebooks Input: parkbd - clear unused function pointers Input: walkera0701 - clear unused function pointers Input: turbografx - clear unused function pointers Input: gamecon - clear unused function pointers Input: db9 - clear unused function pointers
| * Input: parkbd - clear unused function pointersSudip Mukherjee2015-11-171-0/+1
| | | | | | | | | | | | | | | | | | parkbd_parport_cb is a local uninitialized structure and the member function pointers will be pointing to arbitrary locations unless they are cleared. Fixes: 33ca8ab97cbb ("Input: parkbd - use parallel port device model") Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | Merge branch 'for-linus' of ↵Linus Torvalds2015-11-131-1/+1
|\ \ | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull more input updates from Dmitry Torokhov: "An update to the tsc2005 driver that allows it to also support tsc2004 (basically the same controller, but uses i2c instead of spi bus), and a couple of bug fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: parkbd - drop bogus __init from parkbd_allocate_serio() Input: elantech - add Fujitsu Lifebook U745 to force crc_enabled Input: tsc2004 - add support for tsc2004 Input: tsc200x-core - rename functions and variables Input: tsc2005 - separate SPI and core functions
| * Input: parkbd - drop bogus __init from parkbd_allocate_serio()Geert Uytterhoeven2015-11-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | WARNING: vmlinux.o(.text+0x1056606): Section mismatch in reference from the function parkbd_attach() to the function .init.text:parkbd_allocate_serio() The function parkbd_attach() references the function __init parkbd_allocate_serio(). This is often because parkbd_attach lacks a __init annotation or the annotation of parkbd_allocate_serio is wrong. Commit 33ca8ab97cbb676d ("Input: parkbd - use parallel port device model") dropped the __init attribute from the sole caller of parkbd_allocate_serio(), but forgot to remove it from parkbd_allocate_serio() itself. Fixes: 33ca8ab97cbb676d ("Input: parkbd - use parallel port device model") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | Merge branch 'for-linus' of ↵Linus Torvalds2015-11-064-18/+337
|\ \ | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "Items of note: - evdev users can now limit or mask the kind of events they will receive. This will allow applications such as power manager or network manager to only be woken when user presses special keys such as KEY_POWER or KEY_WIFI and not be bothered with ordinary key presses coming from keyboard - support for FocalTech FT6236 touchscreen controller - support for ROHM BU21023/24 touchscreen controller - edt-ft5x06 touchscreen driver got a face lift and can now be used with FT5506 - support for Google Fiber TV Box remote controls - improvements in xpad driver (with more to come) - several parport-based drivers have been switched to the new device model - other miscellaneous driver improvements" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (70 commits) HID: hid-gfrm: avoid warning for input_configured API change HID: hid-input: allow input_configured callback return errors Input: evdev - fix bug in checking duplicate clock change request Input: add userio module Input: evdev - add event-mask API Input: snvs_pwrkey - remove duplicated semicolon HID: hid-gfrm: Google Fiber TV Box remote controls Input: e3x0-button - update Kconfig description Input: tegra-kbc - drop use of IRQF_NO_SUSPEND flag Input: tegra-kbc - enable support for the standard "wakeup-source" property Input: xen - check return value of xenbus_printf Input: hp_sdc_rtc - fix y2038 problem in proc_show Input: nomadik-ske-keypad - fix a trivial typo Input: xpad - fix clash of presence handling with LED setting Input: edt-ft5x06 - work around FT5506 firmware bug Input: edt-ft5x06 - add support for FT5506 Input: edt-ft5x06 - add support for different max support points Input: edt-ft5x06 - use max support points to determine how much to read Input: rotary-encoder - add support for quarter-period mode Input: rotary-encoder - use of_property_read_bool ...
| * Input: add userio moduleStephen Chandler Paul2015-10-273-0/+300
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Debugging input devices, specifically laptop touchpads, can be tricky without having the physical device handy. Here we try to remedy that with userio. This module allows an application to connect to a character device provided by the kernel, and emulate any serio device. In combination with userspace programs that can record PS/2 devices and replay them through the /dev/userio device, this allows developers to debug driver issues on the PS/2 level with devices simply by requesting a recording from the user experiencing the issue without having to have the physical hardware in front of them. Signed-off-by: Stephen Chandler Paul <cpaul@redhat.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
| * Input: parkbd - use parallel port device modelSudip Mukherjee2015-10-051-18/+37
| | | | | | | | | | | | | | Modify parkbd driver to use the new Parallel Port device model. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | input: i8042: Avoid resetting controller on system suspend/resumeRafael J. Wysocki2015-10-141-5/+27
|/ | | | | | | | | | | | | | | | | | | If the upcoming system suspend is not going to be handled by the platform firmware, like in the suspend-to-idle case, it is not necessary to reset the controller in i8042_pm_suspend(), so avoid doing that. Moreover, if the system resume currently in progress has not been started by the platform firmware, like in the suspend-to-idle case, i8042_controller_resume() need not be called by i8042_pm_resume(), so avoid doing that too in that case. Additionally, try to catch the event that woke up the system by calling the interrupt handler early during system resume if it has not been started by the platform firmware. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: psmouse - fix data race in __ps2_commandDmitry Vyukov2015-09-291-8/+14
| | | | | | | | | | | | | | | The data race happens on ps2dev->cmdcnt and ps2dev->cmdbuf contents. __ps2_command reads that data concurrently with the interrupt handler. As the result, for example, if a response arrives just after the timeout, __ps2_command can copy out garbage from ps2dev->cmdbuf but then see that ps2dev->cmdcnt is 0 and return success. Stop the interrupt handler with serio_pause_rx() before reading the results. The data race was found with KernelThreadSanitizer (KTSAN). Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: serio - fix blocking of parportSudip Mukherjee2015-09-271-0/+1
| | | | | | | | | | If parkbd_allocate_serio() fails to allocate memory we are releasing the parport but we missed unregistering the device. As a result this device with exclusive access to that parport remains registered. And no other device will be able to use that parport even though this driver has failed to load. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: i8042 - lower log level for "no controller" messageTakashi Iwai2015-09-051-1/+1
| | | | | | | | Nowadays the machines without i8042 controller is popular, and no need to print "No controller found" message in the error log level, which annoys at booting in quiet mode. Let's lower it info level. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Merge tag 'v4.2-rc3' into nextDmitry Torokhov2015-07-201-3/+2
|\ | | | | | | Sync up with Linux 4.2-rc3 to bring in infrastructure (OF) pieces.
| * Merge branch 'for-linus' of ↵Linus Torvalds2015-07-041-0/+1
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull second round of input updates from Dmitry Torokhov: "A new driver for Weida wdt87xx touch controllers, and a bunch of fixups for other drivers" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: wdt87xx_i2c - add a scaling factor for TOUCH_MAJOR event Input: wdt87xx_i2c - remove stray newline in diagnostic message Input: arc_ps2 - add HAS_IOMEM dependency Input: wdt87xx_i2c - fix format warning Input: improve parsing OF parameters for touchscreens Input: edt-ft5x06 - mark as direct input device Input: use for_each_set_bit() where appropriate Input: add a driver for wdt87xx touchscreen controller Input: axp20x-pek - fix reporting button state as inverted Input: xpad - re-send LED command on present event Input: xpad - set the LEDs properly on XBox Wireless controllers Input: imx_keypad - check for clk_prepare_enable() error
| * | tty: remove buf parameter from tty_name()Rasmus Villemoes2015-05-061-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | tty_name no longer uses the buf parameter, so remove it along with all the 64 byte stack buffers that used to be passed in. Mostly generated by the coccinelle script @depends on patch@ identifier buf; constant C; expression tty; @@ - char buf[C]; <+... - tty_name(tty, buf) + tty_name(tty) ...+> allmodconfig compiles, so I'm fairly confident the stack buffers weren't used for other purposes as well. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | Input: ambakmi - fix system PM by converting to modern callbacksUlf Hansson2015-07-161-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | The legacy system PM support has long time ago been dropped from the AMBA bus. Align to that by converting to the modern system PM callbacks. Fixes: 26825cfd90f9 (ARM: 7914/1: amba: Drop legacy PM support ...) Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | | Input: i8042 - add unmask_kbd_data optionStephen Chandler Paul2015-07-163-7/+54
| |/ |/| | | | | | | | | | | | | | | | | | | | | A big problem with the current i8042 debugging option is that it outputs data going to and from the keyboard by default. As a result, many dmesg logs uploaded by users will unintentionally contain sensitive information such as their password, as such it's probably a good idea not to output data coming from the keyboard unless specifically enabled by the user. Signed-off-by: Stephen Chandler Paul <cpaul@redhat.com> Reviewed-by: Andreas Mohr <andim2@users.sf.net> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* | Input: arc_ps2 - add HAS_IOMEM dependencySebastian Ott2015-06-291-0/+1
|/ | | | | | | | | Fix this compile error: drivers/built-in.o: In function `arc_ps2_probe': /mnt/linux/drivers/input/serio/arc_ps2.c:206: undefined reference to `devm_ioremap_resource' Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* Input: gscps2 - drop pci_ids dependencyMichael S. Tsirkin2015-04-061-1/+0
| | | | | | | This driver does not use any PCI IDs, don't include the pci_ids.h header. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
OpenPOWER on IntegriCloud