summaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/hw/nes
Commit message (Collapse)AuthorAgeFilesLines
* net: percpu net_device refcountEric Dumazet2010-10-122-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We tried very hard to remove all possible dev_hold()/dev_put() pairs in network stack, using RCU conversions. There is still an unavoidable device refcount change for every dst we create/destroy, and this can slow down some workloads (routers or some app servers, mmap af_packet) We can switch to a percpu refcount implementation, now dynamic per_cpu infrastructure is mature. On a 64 cpus machine, this consumes 256 bytes per device. On x86, dev_hold(dev) code : before lock incl 0x280(%ebx) after: movl 0x260(%ebx),%eax incl fs:(%eax) Stress bench : (Sending 160.000.000 UDP frames, IP route cache disabled, dual E5540 @2.53GHz, 32bit kernel, FIB_TRIE) Before: real 1m1.662s user 0m14.373s sys 12m55.960s After: real 0m51.179s user 0m15.329s sys 10m15.942s Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* RDMA/nes: Fix hang with modified FIN handling on A0 cardsFaisal Latif2010-09-082-1/+3
| | | | | | | | Changing state to CLOSING when FIN is received causes A0 cards to hang. Fix this by checking for A0 cards in FIN handling. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* RDMA/nes: Change state to closing after FINFaisal Latif2010-09-081-1/+12
| | | | | | | | | | When the driver receives an AE for FIN received, it closes the connection without changing the state of the connection in the hardware to closing. By changing the state to closing, hardware will do a normal close sequence. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* RDMA/nes: Fix double CLOSE event indication crashFaisal Latif2010-09-081-8/+10
| | | | | | | | | | | | | | | | During a stress testing in a large cluster, multiple close event are detected and BUG() is hit in the iWARP core. The cause is that the active node gave up while waiting for an MPA response from the peer and tried to close the connection by sending RST. The passive node driver receives the RST but is waiting for MPA response from the user. When the MPA accept is received, the driver offloads the connection and sends a CLOSE event. The driver gets an AE indicating RESET received and also sends a CLOSE event, hitting a BUG(). Fix this by correcting RESET handling and sending CLOSE events. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* RDMA/nes: Write correct register write to set TX pause paramChien Tung2010-09-081-2/+2
| | | | | | | | | | Setting TX pause param writes to the wrong register location causing the adapter to hang. Correct the define used to write the reigster. Addresses: https://bugs.openfabrics.org/show_bug.cgi?id=2116 Reported-by: Shiri Franchi <shirif@voltaire.com> Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* Merge branch 'for-linus' of ↵Linus Torvalds2010-08-078-52/+64
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (42 commits) IB/qib: Add missing <linux/slab.h> include IB/ehca: Drop unnecessary NULL test RDMA/nes: Fix confusing if statement indentation IB/ehca: Init irq tasklet before irq can happen RDMA/nes: Fix misindented code RDMA/nes: Fix showing wqm_quanta RDMA/nes: Get rid of "set but not used" variables RDMA/nes: Read firmware version from correct place IB/srp: Export req_lim via sysfs IB/srp: Make receive buffer handling more robust IB/srp: Use print_hex_dump() IB: Rename RAW_ETY to RAW_ETHERTYPE RDMA/nes: Fix two sparse warnings RDMA/cxgb3: Make needlessly global iwch_l2t_send() static IB/iser: Make needlessly global iser_alloc_rx_descriptors() static RDMA/cxgb4: Add timeouts when waiting for FW responses IB/qib: Fix race between qib_error_qp() and receive packet processing IB/qib: Limit the number of packets processed per interrupt IB/qib: Allow writes to the diag_counters to be able to clear them IB/qib: Set cfgctxts to number of CPUs by default ...
| * RDMA/nes: Fix confusing if statement indentationRoland Dreier2010-08-051-3/+3
| | | | | | | | | | | | | | | | | | Fix confusing indentation that makes a statement look as if it's part of an if statement when in fact it isn't. Reported-by: Julia Lawall <julia@diku.dk> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * RDMA/nes: Fix misindented codeRoland Dreier2010-08-041-14/+12
| | | | | | | | | | | | | | In nes_probe(), a bit of code is indented one tab stop too far. Fix this. Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * RDMA/nes: Fix showing wqm_quantaRoland Dreier2010-08-041-1/+1
| | | | | | | | | | | | In nes_show_wqm_quanta(), the wrong value is printed. Fix this. Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * RDMA/nes: Get rid of "set but not used" variablesRoland Dreier2010-08-045-21/+2
| | | | | | | | | | | | | | Delete dead code in various places that is shown by gcc 4.6's new -Wunused-but-set-variable warnings. Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * RDMA/nes: Read firmware version from correct placeMiroslaw Walukiewicz2010-08-041-1/+1
| | | | | | | | | | Signed-off-by: Mirek Walukiewicz <miroslaw.walukiewicz@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * RDMA/nes: Fix two sparse warningsOr Gerlitz2010-08-042-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Simple changes to fix warnings: CHECK drivers/infiniband/hw/nes/nes_verbs.c nes_verbs.c:1944:45: warning: Using plain integer as NULL pointer nes_verbs.c:1944:48: warning: Using plain integer as NULL pointer CHECK drivers/infiniband/hw/nes/nes_cm.c nes_cm.c:2645:43: warning: mixing different enum types nes_cm.c:2645:43: int enum iw_cm_event_type versus nes_cm.c:2645:43: int enum iw_cm_event_status Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Acked-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * RDMA/nes: Fix hangs on ifdownFaisal Latif2010-07-284-6/+33
| | | | | | | | | | | | | | | | | | | | When ib_unregister_device() is called from netdev stop during ifdown, it sometimes hangs. Changes made to indicate port_err to ib_dispatch_event() during netdev stop and port_active during netdev open. The ib_unregister_device() is only called during remove of the module. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * RDMA/nes: Store and print eeprom versionChien Tung2010-07-282-1/+7
| | | | | | | | | | | | | | | | Read and print eeprom version and save it off for later use. Also delete a tab. Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * RDMA/nes: Convert pci_table entries to PCI_VDEVICEPeter Huewe2010-07-281-2/+2
| | | | | | | | | | | | | | | | | | This patch converts pci_table entries, where .subvendor=PCI_ANY_ID and .subdevice=PCI_ANY_ID, .class=0 and .class_mask=0, to use the PCI_VDEVICE macro, and thus improves readability. Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * RDMA/nes: Rewrite expression to avoid undefined semanticsRoland Dreier2010-07-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Change code like x = expr(++x) that assigns to x twice without a sequence point in between to the intended (and well-defined) x = expr(x + 1) Signed-off-by: Roland Dreier <rolandd@cisco.com>
* | IB/{nes, ipoib}: Pass supported flags to ethtool_op_set_flags()Ben Hutchings2010-07-041-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | Following commit 1437ce3983bcbc0447a0dedcd644c14fe833d266 "ethtool: Change ethtool_op_set_flags to validate flags", ethtool_op_set_flags takes a third parameter and cannot be used directly as an implementation of ethtool_ops::set_flags. Changes nes and ipoib driver to pass in the appropriate value. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net-next: remove useless union keywordChangli Gao2010-06-101-1/+1
|/ | | | | | | | | | remove useless union keyword in rtable, rt6_info and dn_route. Since there is only one member in a union, the union keyword isn't useful. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'for-linus' of ↵Linus Torvalds2010-05-253-19/+67
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA/nes: Fix incorrect unlock in nes_process_mac_intr() RDMA/nes: Async event for closed QP causes crash RDMA/nes: Have ethtool read hardware registers for rx/tx stats RDMA/cxgb4: Only insert sq qid in lookup table RDMA/cxgb4: Support IB_WR_READ_WITH_INV opcode RDMA/cxgb4: Set fence flag for inv-local-stag work requests RDMA/cxgb4: Update some HW limits RDMA/cxgb4: Don't limit fastreg page list depth RDMA/cxgb4: Return proper errors in fastreg mr/pbl allocation RDMA/cxgb4: Fix overflow bug in CQ arm RDMA/cxgb4: Optimize CQ overflow detection RDMA/cxgb4: CQ size must be IQ size - 2 RDMA/cxgb4: Register RDMA provider based on LLD state_change events RDMA/cxgb4: Detach from the LLD after unregistering RDMA device IB/ipath: Remove support for QLogic PCIe QLE devices IB/qib: Add new qib driver for QLogic PCIe InfiniBand adapters IB/mad: Make needlessly global mad_sendq_size/mad_recvq_size static IB/core: Allow device-specific per-port sysfs files mlx4_core: Clean up mlx4_alloc_icm() a bit mlx4_core: Fix possible chunk sg list overflow in mlx4_alloc_icm()
| *-. Merge branches 'cxgb4', 'misc', 'mlx4', 'nes' and 'qib' into for-nextRoland Dreier2010-05-253-19/+67
| |\ \
| | | * IB/core: Allow device-specific per-port sysfs filesRalph Campbell2010-05-211-1/+1
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a new parameter to ib_register_device() so that low-level device drivers can pass in a pointer to a callback function that will be called for each port that is registered in sysfs. This allows low-level device drivers to create files in /sys/class/infiniband/<hca>/ports/<N>/ without having to poke through the internals of the RDMA sysfs handling. There is no need for an unregister function since the kobject reference will go to zero when ib_unregister_device() is called. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| | * RDMA/nes: Fix incorrect unlock in nes_process_mac_intr()Chien Tung2010-05-251-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit ce6e74f2 ("RDMA/nes: Make nesadapter->phy_lock usage consistent") introduced a problem where phy_lock was only unlocked within an if statement and so nes_process_mac_intr() could return with phy_lock still held. Fix this. This was discovered because of the sparse warning: drivers/infiniband/hw/nes/nes_hw.c:2643:9: warning: context imbalance in 'nes_process_mac_intr' - different lock contexts for basic block Reported-by: Roland Dreier <rdreier@cisco.com> Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| | * RDMA/nes: Async event for closed QP causes crashFaisal Latif2010-05-241-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | Under abnormal termination, modify_qp() closes the QP, and async event (AE) handling also attempts to close the same QP, causing a crash. Fix this by checking the state of the QP before processing the AE. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| | * RDMA/nes: Have ethtool read hardware registers for rx/tx statsFaisal Latif2010-05-241-17/+55
| |/ | | | | | | | | | | | | | | | | Enhance ethtool to read hardware registers for rcv/tx error stats. Also add support for free pbl resources. Remove cq depth stats, which are not used. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds2010-05-201-4/+3
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1674 commits) qlcnic: adding co maintainer ixgbe: add support for active DA cables ixgbe: dcb, do not tag tc_prio_control frames ixgbe: fix ixgbe_tx_is_paused logic ixgbe: always enable vlan strip/insert when DCB is enabled ixgbe: remove some redundant code in setting FCoE FIP filter ixgbe: fix wrong offset to fc_frame_header in ixgbe_fcoe_ddp ixgbe: fix header len when unsplit packet overflows to data buffer ipv6: Never schedule DAD timer on dead address ipv6: Use POSTDAD state ipv6: Use state_lock to protect ifa state ipv6: Replace inet6_ifaddr->dead with state cxgb4: notify upper drivers if the device is already up when they load cxgb4: keep interrupts available when the ports are brought down cxgb4: fix initial addition of MAC address cnic: Return SPQ credit to bnx2x after ring setup and shutdown. cnic: Convert cnic_local_flags to atomic ops. can: Fix SJA1000 command register writes on SMP systems bridge: fix build for CONFIG_SYSFS disabled ARCNET: Limit com20020 PCI ID matches for SOHARD cards ... Fix up various conflicts with pcmcia tree drivers/net/ {pcmcia/3c589_cs.c, wireless/orinoco/orinoco_cs.c and wireless/orinoco/spectrum_cs.c} and feature removal (Documentation/feature-removal-schedule.txt). Also fix a non-content conflict due to pm_qos_requirement getting renamed in the PM tree (now pm_qos_request) in net/mac80211/scan.c
| * Merge branch 'master' of ↵David S. Miller2010-04-116-5/+10
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/stmmac/stmmac_main.c drivers/net/wireless/wl12xx/wl1271_cmd.c drivers/net/wireless/wl12xx/wl1271_main.c drivers/net/wireless/wl12xx/wl1271_spi.c net/core/ethtool.c net/mac80211/scan.c
| * | net: convert multicast list to list_headJiri Pirko2010-04-031-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Converts the list and the core manipulating with it to be the same as uc_list. +uses two functions for adding/removing mc address (normal and "global" variant) instead of a function parameter. +removes dev_mcast.c completely. +exposes netdev_hw_addr_list_* macros along with __hw_addr_* functions for manipulation with lists on a sandbox (used in bonding and 80211 drivers) Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | RDMA/nes: Make unnecessarily global functions staticRoland Dreier2010-04-212-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This allows the compiler to do a bit better; on my x86-64 build: add/remove: 0/2 grow/shrink: 1/0 up/down: 2288/-2365 (-77) function old new delta nes_init_phy 273 2561 +2288 nes_init_1g_phy 469 - -469 nes_init_2025_phy 1896 - -1896 Signed-off-by: Roland Dreier <rolandd@cisco.com>
* | | RDMA/nes: Make nesadapter->phy_lock usage consistentChien Tung2010-04-213-20/+14
| |/ |/| | | | | | | | | | | | | | | | | | | nes_{read,write}_1G_phy_reg() are using phy_lock while nes_{read,write}_10G_phy_reg() leave that to the caller. Remove phy_lock from 1G routines and leave the locking to the caller. Add additional phy_lock calls around 1G read/write. Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* | Merge branch 'for-linus' of ↵Linus Torvalds2010-04-091-5/+4
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/mlx4: Check correct variable for allocation failure RDMA/nes: Correct cap.max_inline_data assignment in nes_query_qp() RDMA/cm: Set num_paths when manually assigning path records IB/cm: Fix device_create() return value check
| * | RDMA/nes: Correct cap.max_inline_data assignment in nes_query_qp()Chien Tung2010-04-071-5/+4
| |/ | | | | | | | | | | | | | | | | cap.max_inline_data is incorrectly set in init_attr instead of attr. Set it in attr so subsequent init_attr.cap assignment will get the correct value. Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* | include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-306-0/+6
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* RDMA/nes: Fix CX4 link problem in back-to-back configurationChien Tung2010-03-121-2/+28
| | | | | | | | | Commit 09124e19 ("RDMA/nes: Add support for KR device id 0x0110") took out too much code and broke CX4 link detection in back-to-back configuration. Put back the code that does the link check. Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* RDMA/nes: Clear stall bit before destroying NIC QPChien Tung2010-03-112-0/+9
| | | | | | | | Clear the stall bit to drop any incoming packets while destroying NIC QP. This will prevent a chip resource leak. Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* RDMA/nes: Set assume_aligned_header bitFaisal Latif2010-03-111-0/+1
| | | | | | | Set assume_aligned_header bit in QP context as requested by hardware group. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* Merge branch 'for-linus' of ↵Linus Torvalds2010-03-037-290/+284
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (48 commits) IB/srp: Clean up error path in srp_create_target_ib() IB/srp: Split send and recieve CQs to reduce number of interrupts RDMA/nes: Add support for KR device id 0x0110 IB/uverbs: Use anon_inodes instead of private infinibandeventfs IB/core: Fix and clean up ib_ud_header_init() RDMA/cxgb3: Mark RDMA device with CXIO_ERROR_FATAL when removing RDMA/cxgb3: Don't allocate the SW queue for user mode CQs RDMA/cxgb3: Increase the max CQ depth RDMA/cxgb3: Doorbell overflow avoidance and recovery IB/core: Pack struct ib_device a little tighter IB/ucm: Clean whitespace errors IB/ucm: Increase maximum devices supported IB/ucm: Use stack variable 'base' in ib_ucm_add_one IB/ucm: Use stack variable 'devnum' in ib_ucm_add_one IB/umad: Clean whitespace IB/umad: Increase maximum devices supported IB/umad: Use stack variable 'base' in ib_umad_init_port IB/umad: Use stack variable 'devnum' in ib_umad_init_port IB/umad: Remove port_table[] IB/umad: Convert *cdev to cdev in struct ib_umad_port ...
| * RDMA/nes: Add support for KR device id 0x0110Chien Tung2010-02-255-218/+243
| | | | | | | | | | | | | | | | | | | | | | | | | | Add support for KR device id 0x0110. While at it, cleanup nes_init_phy() by splitting it into nes_init_1g_phy() and nes_init_2025_phy(). Remove support for NES_PHY_TYPE_IRIS, which was used on an XFP board that was only manufactured in small quantities and given out for evals in even smaller quantities. Signed-off-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * RDMA/nes: Change WQ overflow return codeOr Gerlitz2010-02-191-3/+3
| | | | | | | | | | | | | | | | | | Change the nes driver to return -ENOMEM on SQ/RQ overflow to match the return code of other RDMA HW drivers (e.g cxgb3, ehca, mlx4, mthca). Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Acked-by: Chien Tung <chien.tin.tung@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * RDMA/nes: Multiple disconnects cause crash during AE handlingFaisal Latif2010-02-191-60/+28
| | | | | | | | | | | | | | | | There is a double disconnect during AE processing, causing crashes. While fixing the crash, also simplify the AE handling code. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * RDMA/nes: Fix crash when listener destroyed during loopback setupFaisal Latif2010-02-191-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | When a listener is destroyed and there is an MPA response pending for loopback connection, the active side cm_node gets destroyed twice: once in cm_event_connect_error() and again in nes_accept()/nes_reject(). Increment the cm_node's refcount so it's not destroyed by cm_event_connect_error(). Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * RDMA/nes: Use atomic counters for CM listener create and destroyFaisal Latif2010-02-193-8/+8
| | | | | | | | | | | | | | | | | | After running long iterative MPI tests, sometimes ethtool reports a "CM Destroy Listener" count more than the "CM Create Listener" count. This inconsistency is fixed by making counter variables atomic. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* | infiniband: convert to use netdev_for_each_mc_addrJiri Pirko2010-02-261-36/+49
| | | | | | | | | | | | | | | | Due to the loop complexicity in nes_nic.c, I'm using char* to copy mc addresses to it. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: use netdev_mc_count and netdev_mc_empty when appropriateJiri Pirko2010-02-121-1/+1
|/ | | | | | | | | | | This patch replaces dev->mc_count in all drivers (hopefully I didn't miss anything). Used spatch and did small tweaks and conding style changes when it was suitable. Jirka Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'for-linus' of ↵Linus Torvalds2009-12-1613-497/+645
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (45 commits) RDMA/cxgb3: Fix error paths in post_send and post_recv RDMA/nes: Fix stale ARP issue RDMA/nes: FIN during MPA startup causes timeout RDMA/nes: Free kmap() resources RDMA/nes: Check for zero STag RDMA/nes: Fix Xansation test crash on cm_node ref_count RDMA/nes: Abnormal listener exit causes loopback node crash RDMA/nes: Fix crash in nes_accept() RDMA/nes: Resource not freed for REJECTed connections RDMA/nes: MPA request/response error checking RDMA/nes: Fix query of ORD values RDMA/nes: Fix MAX_CM_BUFFER define RDMA/nes: Pass correct size to ioremap_nocache() RDMA/nes: Update copyright and branding string RDMA/nes: Add max_cqe check to nes_create_cq() RDMA/nes: Clean up struct nes_qp RDMA/nes: Implement IB_SIGNAL_ALL_WR as an iWARP extension RDMA/nes: Add additional SFP+ PHY uC status check and PHY reset RDMA/nes: Correct fast memory registration implementation IB/ehca: Fix error paths in post_send and post_recv ...
| * RDMA/nes: Fix stale ARP issueFaisal Latif2009-12-091-10/+27
| | | | | | | | | | | | | | | | | | | | | | When the remote node's ethernet address changes, the connection keeps trying to connect using the old address. The connection wil continue failing until the driver is unloaded and loaded again (eiter reboot or rmmod). Fix this by checking that the NIC has the correct address before starting a connection. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * RDMA/nes: FIN during MPA startup causes timeoutFaisal Latif2009-12-091-1/+8
| | | | | | | | | | | | | | | | | | | | | | A FIN that is received during an MPA start up sequence causes a timeout in iwcm.c. The connection has not been completely closed so the iwcm code is waiting for resources to be cleaned up. This closes the connection so everything cleans up correctly. Signed-off-by: Don Wood <donald.e.wood@intel.com> Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * RDMA/nes: Free kmap() resourcesFaisal Latif2009-12-093-2/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We fail when creating many qps as kmap() fails for sq_vbase. Fix this by doing kunmap() as soon as we are done with sq_vbase. We do kunmap() in one of the locations below: (1) nes_destroy_qp() (2) nes_accept() (3) nes_connect_event We keep a flag to avoid multiple calls to kunmap(). Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * RDMA/nes: Check for zero STagFaisal Latif2009-12-092-4/+2
| | | | | | | | | | | | | | | | | | | | STags are generated randomly but the driver does not correctly prevent a zero STag. Using STag zero is privileged and causes a user space application to fail. This change prevents the driver from trying to allocate a zero STag. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * RDMA/nes: Fix Xansation test crash on cm_node ref_countFaisal Latif2009-12-091-1/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While running a Xansation test, an active side node crashed. The problem started on the passive side, which generated an STtag that was 0. The passive side sent a TERMINATE instead of an MPA REJECT msg. The active side, receives TERMINATE and sends connect_err() and set the cm_node state to CLOSED. The passive side sends FIN + ACK after TERMINATE. Active side ends up in handle_ack_pkt() and send_reset(). send_reset() consumes 1 cm_node's ref_count. Because the cm_node is in CLOSED state, which means that cm_node will be destroyed after completion of the connect_err() indication, CM will crash after send_reset(). Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * RDMA/nes: Abnormal listener exit causes loopback node crashFaisal Latif2009-12-091-13/+3
| | | | | | | | | | | | | | | | | | | | | | When the listener is destroyed for a loopback connection, the listener node gets a reset event. This causes a crash as the listener is not expecting a reset event. Code review of cm_event_reset() during debugging showed the cm_id ref count is incremented after calling its event handler and not before. Signed-off-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
OpenPOWER on IntegriCloud