summaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/hw/ipath
Commit message (Collapse)AuthorAgeFilesLines
* IB/ipath: Fix RDMA write with immediate copy of last packetRalph Campbell2008-10-271-5/+5
| | | | | | | | | | When the last packet of a RDMA write with immediate is received, the next receive work queue entry ID should be used to generate a completion entry. The code was incorrectly resetting part of the state used to copy the last packet. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* device create: infiniband: convert device_create_drvdata to device_createGreg Kroah-Hartman2008-10-161-1/+1
| | | | | | | | | | Now that device_create() has been audited, rename things back to the original call to be sane. Cc: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* IB/ipath: Fix hang on module unloadYannick Cote2008-09-291-0/+7
| | | | | | | | Handle the case where posting a send is requested when the link is down. This fixes <https://bugs.openfabrics.org/show_bug.cgi?id=1117>. Signed-off-by: Yannick Cote <yannick.cote@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/ipath: Fix SLID generation for RC/UC QPs when LMC > 0Ralph Campbell2008-09-202-2/+4
| | | | | | | | The code to set the source LID in the sent LRH was not setting the low bits if LMC != 0 for RC/UC QPs. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* removed unused #include <linux/version.h>'sAdrian Bunk2008-08-231-1/+0
| | | | | | | | This patch lets the files using linux/version.h match the files that #include it. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* IB/ipath: Fix incorrect check for max physical address in TIDDave Olson2008-08-151-1/+1
| | | | | | | | The check for max physical address was incorrect, thus limiting the range of allowed physical addresses. Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/ipath: Fix lost UD send work requestRalph Campbell2008-08-151-2/+6
| | | | | | | | | | | | If a UD QP has some work requests queued to be sent by the DMA engine followed by a local loopback work request, we have to wait for the previous work requests to finish or the completion for the local loopback work request would be generated out of order. The problem was that the work request queue pointer was already updated so that the request would not be processed when the DMA queue drained. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* Merge branch 'for-linus' of ↵Linus Torvalds2008-08-074-12/+18
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/mad: Test ib_create_send_mad() return with IS_ERR(), not == NULL IB/mlx4: Allow 4K messages for UD QPs mlx4_core: Add ethernet fields to CQE struct IB/ipath: Fix printk format warnings RDMA/cxgb3: Fix deadlock initializing iw_cxgb3 device RDMA/cxgb3: Fix up MW access rights RDMA/cxgb3: Fix QP capabilities RDMA/cma: Remove padding arrays by using struct sockaddr_storage IB/ipath: Use unsigned long for irq flags IPoIB/cm: Set correct SG list in ipoib_cm_init_rx_wr()
| * IB/ipath: Fix printk format warningsAlexander Beregalov2008-08-043-9/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ipath_driver.c:1260: warning: format '%Lx' expects type 'long long unsigned int', but argument 6 has type 'long unsigned int' ipath_driver.c:1459: warning: format '%Lx' expects type 'long long unsigned int', but argument 4 has type 'u64' ipath_intr.c:358: warning: format '%Lx' expects type 'long long unsigned int', but argument 3 has type 'u64' ipath_intr.c:358: warning: format '%Lu' expects type 'long long unsigned int', but argument 6 has type 'u64' ipath_intr.c:1119: warning: format '%Lx' expects type 'long long unsigned int', but argument 5 has type 'u64' ipath_intr.c:1119: warning: format '%Lx' expects type 'long long unsigned int', but argument 3 has type 'u64' ipath_intr.c:1123: warning: format '%Lx' expects type 'long long unsigned int', but argument 3 has type 'u64' ipath_intr.c:1130: warning: format '%Lx' expects type 'long long unsigned int', but argument 4 has type 'u64' ipath_iba7220.c:1032: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'u64' ipath_iba7220.c:1045: warning: format '%llX' expects type 'long long unsigned int', but argument 3 has type 'u64' ipath_iba7220.c:2506: warning: format '%Lu' expects type 'long long unsigned int', but argument 4 has type 'u64' Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * IB/ipath: Use unsigned long for irq flagsVegard Nossum2008-07-301-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A few functions in the ipath driver incorrectly use unsigned int to hold irq flags for spin_lock_irqsave(). This patch was generated using the Coccinelle framework with the following semantic patch: The semantic patch I used was this: @@ expression lock; identifier flags; expression subclass; @@ - unsigned int flags; + unsigned long flags; ... <+... ( spin_lock_irqsave(lock, flags) | _spin_lock_irqsave(lock) | spin_unlock_irqrestore(lock, flags) | _spin_unlock_irqrestore(lock, flags) | read_lock_irqsave(lock, flags) | _read_lock_irqsave(lock) | read_unlock_irqrestore(lock, flags) | _read_unlock_irqrestore(lock, flags) | write_lock_irqsave(lock, flags) | _write_lock_irqsave(lock) | write_unlock_irqrestore(lock, flags) | _write_unlock_irqrestore(lock, flags) | spin_lock_irqsave_nested(lock, flags, subclass) | _spin_lock_irqsave_nested(lock, subclass) | spin_unlock_irqrestore(lock, flags) | _spin_unlock_irqrestore(lock, flags) | _raw_spin_lock_flags(lock, flags) | __raw_spin_lock_flags(lock, flags) ) ...+> Cc: Ralph Campbell <ralph.campbell@qlogic.com> Cc: Julia Lawall <julia@diku.dk> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* | Remove newline from the description of module parametersNiels de Vos2008-08-011-1/+1
|/ | | | | | | | | | | | | | | | | | | | Some module parameters with only one line have the '\n' at the end of the description. This is not needed nor wanted as after the description the type (i.e. int) is followed by a newline. Some modules contain a multi-line description, these are not affected by this patch. Signed-off-by: Niels de Vos <niels.devos@wincor-nixdorf.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: Ed L. Cashin <ecashin@coraid.com> Cc: Dave Airlie <airlied@linux.ie> Cc: Roland Dreier <rolandd@cisco.com> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* dma-mapping: add the device argument to dma_mapping_error()FUJITA Tomonori2008-07-262-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add per-device dma_mapping_ops support for CONFIG_X86_64 as POWER architecture does: This enables us to cleanly fix the Calgary IOMMU issue that some devices are not behind the IOMMU (http://lkml.org/lkml/2008/5/8/423). I think that per-device dma_mapping_ops support would be also helpful for KVM people to support PCI passthrough but Andi thinks that this makes it difficult to support the PCI passthrough (see the above thread). So I CC'ed this to KVM camp. Comments are appreciated. A pointer to dma_mapping_ops to struct dev_archdata is added. If the pointer is non NULL, DMA operations in asm/dma-mapping.h use it. If it's NULL, the system-wide dma_ops pointer is used as before. If it's useful for KVM people, I plan to implement a mechanism to register a hook called when a new pci (or dma capable) device is created (it works with hot plugging). It enables IOMMUs to set up an appropriate dma_mapping_ops per device. The major obstacle is that dma_mapping_error doesn't take a pointer to the device unlike other DMA operations. So x86 can't have dma_mapping_ops per device. Note all the POWER IOMMUs use the same dma_mapping_error function so this is not a problem for POWER but x86 IOMMUs use different dma_mapping_error functions. The first patch adds the device argument to dma_mapping_error. The patch is trivial but large since it touches lots of drivers and dma-mapping.h in all the architecture. This patch: dma_mapping_error() doesn't take a pointer to the device unlike other DMA operations. So we can't have dma_mapping_ops per device. Note that POWER already has dma_mapping_ops per device but all the POWER IOMMUs use the same dma_mapping_error function. x86 IOMMUs use device argument. [akpm@linux-foundation.org: fix sge] [akpm@linux-foundation.org: fix svc_rdma] [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: fix bnx2x] [akpm@linux-foundation.org: fix s2io] [akpm@linux-foundation.org: fix pasemi_mac] [akpm@linux-foundation.org: fix sdhci] [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: fix sparc] [akpm@linux-foundation.org: fix ibmvscsi] Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Muli Ben-Yehuda <muli@il.ibm.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Avi Kivity <avi@qumranet.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* device create: infiniband: convert device_create to device_create_drvdataGreg Kroah-Hartman2008-07-211-1/+1
| | | | | | | | | | | device_create() is race-prone, so use the race-free device_create_drvdata() instead as device_create() is going away. Cc: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Merge branch 'core/rcu' into core/rcu-for-linusIngo Molnar2008-07-152-2/+2
|\
| * Merge branch 'linus' into core/rcuIngo Molnar2008-06-165-13/+19
| |\
| * | rcu: split list.h and move rcu-protected lists into rculist.hFranck Bui-Huu2008-05-192-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move rcu-protected lists from list.h into a new header file rculist.h. This is done because list are a very used primitive structure all over the kernel and it's currently impossible to include other header files in this list.h without creating some circular dependencies. For example, list.h implements rcu-protected list and uses rcu_dereference() without including rcupdate.h. It actually compiles because users of rcu_dereference() are macros. Others RCU functions could be used too but aren't probably because of this. Therefore this patch creates rculist.h which includes rcupdates without to many changes/troubles. Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Josh Triplett <josh@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | | IB/ipath: Use IEEE OUI for vendor_id reported by ibv_query_device()Ralph Campbell2008-07-142-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The IB spe. for SubnGet(NodeInfo) and query HCA says that the vendor ID field should be the IEEE OUI assigned to the vendor. The ipath driver was returning the PCI vendor ID instead. This will affect applications which call ibv_query_device(). The old value was 0x001fc1 or 0x001077, the new value is 0x001175. The vendor ID doesn't appear to be exported via /sys so that should reduce possible compatibility issues. I'm only aware of Open MPI as a major application which depends on this change, and they have made necessary adjustments. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* | | RDMA/core: Add memory management extensions supportSteve Wise2008-07-145-13/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the IB "base memory management extension" (BMME) and the equivalent iWARP operations (which the iWARP verbs mandates all devices must implement). The new operations are: - Allocate an ib_mr for use in fast register work requests. - Allocate/free a physical buffer lists for use in fast register work requests. This allows device drivers to allocate this memory as needed for use in posting send requests (eg via dma_alloc_coherent). - New send queue work requests: * send with remote invalidate * fast register memory region * local invalidate memory region * RDMA read with invalidate local memory region (iWARP only) Consumer interface details: - A new device capability flag IB_DEVICE_MEM_MGT_EXTENSIONS is added to indicate device support for these features. - New send work request opcodes IB_WR_FAST_REG_MR, IB_WR_LOCAL_INV, IB_WR_RDMA_READ_WITH_INV are added. - A new consumer API function, ib_alloc_mr() is added to allocate fast register memory regions. - New consumer API functions, ib_alloc_fast_reg_page_list() and ib_free_fast_reg_page_list() are added to allocate and free device-specific memory for fast registration page lists. - A new consumer API function, ib_update_fast_reg_key(), is added to allow the key portion of the R_Key and L_Key of a fast registration MR to be updated. Consumers call this if desired before posting a IB_WR_FAST_REG_MR work request. Consumers can use this as follows: - MR is allocated with ib_alloc_mr(). - Page list memory is allocated with ib_alloc_fast_reg_page_list(). - MR R_Key/L_Key "key" field is updated with ib_update_fast_reg_key(). - MR made VALID and bound to a specific page list via ib_post_send(IB_WR_FAST_REG_MR) - MR made INVALID via ib_post_send(IB_WR_LOCAL_INV), ib_post_send(IB_WR_RDMA_READ_WITH_INV) or an incoming send with invalidate operation. - MR is deallocated with ib_dereg_mr() - page lists dealloced via ib_free_fast_reg_page_list(). Applications can allocate a fast register MR once, and then can repeatedly bind the MR to different physical block lists (PBLs) via posting work requests to a send queue (SQ). For each outstanding MR-to-PBL binding in the SQ pipe, a fast_reg_page_list needs to be allocated (the fast_reg_page_list is owned by the low-level driver from the consumer posting a work request until the request completes). Thus pipelining can be achieved while still allowing device-specific page_list processing. The 32-bit fast register memory key/STag is composed of a 24-bit index and an 8-bit key. The application can change the key each time it fast registers thus allowing more control over the peer's use of the key/STag (ie it can effectively be changed each time the rkey is rebound to a page list). Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* | | IB/ipath: Simplify code using ARRAY_SIZE() macroRobert P. J. Day2008-07-141-2/+2
| | | | | | | | | | | | | | | Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* | | Merge commit 'v2.6.26' into bkl-removalJonathan Corbet2008-07-145-13/+19
|\ \ \ | | |/ | |/|
| * | IB/ipath: Fix SM trap forwardingRalph Campbell2008-06-061-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | SM/SMA traps received by the ipath driver should be forwarded to the SM if it is running on the host. The ib_ipath driver was incorrectly replying with "bad method." Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * | IB/ipath: Fix device capability flagsRalph Campbell2008-05-261-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | The driver supports a few features (RNR NAK, port active event, SRQ resize) that were not reported in the device capability flags. This patch fixes that. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * | IB/ipath: Avoid test_bit() on u64 SDMA status valueRoland Dreier2008-05-262-8/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Gabriel C <nix.or.die@googlemail.com> pointed out that when the x86 bitops are updated to operate on unsigned long, the code in sdma_abort_task() will produce warnings: drivers/infiniband/hw/ipath/ipath_sdma.c: In function 'sdma_abort_task': drivers/infiniband/hw/ipath/ipath_sdma.c:267: warning: passing argument 2 of 'constant_test_bit' from incompatible pointer type and so on, because it uses test_bit() to operation on a u64 value (returned by ipath_read_kref64() for a hardware register). Fix up these warnings by converting the test_bit() operations to &ing with appropriate symbolic defines of the bits within the hardware register. This has the benign side-effect of making the code more self-documenting as well. Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * | IB/ipath: Fix UC receive completion opcode for RDMA WRITE with immediateRalph Campbell2008-05-151-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When I fixed the RC receive completion opcode in 2bfc8e9e ("IB/ipath: Return the correct opcode for RDMA WRITE with immediate"), I forgot to fix UC, which had the same problem for RDMA write with immediate returning the wrong opcode. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
| * | IB/ipath: Fix printk format for ipath_sdma_statusRoland Dreier2008-05-151-2/+2
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit f018c7e1 ("IB/ipath: Change ipath_devdata.ipath_sdma_status to be unsigned long") changed ipath_sdma_status to be unsigned long, but left a few debug messages that printed it out with a %016llx format, which generates the warnings drivers/infiniband/hw/ipath/ipath_sdma.c:348: warning: format '%016llx' expects type 'long long unsigned int', but argument 3 has type 'long unsigned int' drivers/infiniband/hw/ipath/ipath_sdma.c:618: warning: format '%016llx' expects type 'long long unsigned int', but argument 3 has type 'long unsigned int' Fix this by changing the format used to print out the value to %08lx (8 hex digits are now sufficient, because the highest bit used is 31). Warnings reported by Randy Dunlap <randy.dunlap@oracle.com>. Signed-off-by: Roland Dreier <rolandd@cisco.com>
* | Add a bunch of cycle_kernel_lock() callsJonathan Corbet2008-06-201-1/+2
| | | | | | | | | | | | | | | | | | All of the open() functions which don't need the BKL on their face may still depend on its acquisition to serialize opens against driver initialization. So make those functions acquire then release the BKL to be on the safe side. Signed-off-by: Jonathan Corbet <corbet@lwn.net>
* | Add "no BKL needed" comments to several driversJonathan Corbet2008-06-201-0/+1
|/ | | | | | | | This documents the fact that somebody looked at the relevant open() functions and concluded that, due to their trivial nature, no locking was needed. Signed-off-by: Jonathan Corbet <corbet@lwn.net>
* IB/ipath: Change ipath_devdata.ipath_sdma_status to be unsigned longRoland Dreier2008-05-132-4/+4
| | | | | | | | | | | | | | | Andrew Morton <akpm@linux-foundation.org> pointed out that bitops should take an unsigned long * arg. However, the ipath driver was doing bitops on struct ipath_devdata.ipath_sdma_status, which is u64. Change this member to unsigned long to avoid tons of warnings when x86 fixes the bitops to take unsigned long * instead of void *. Also, change the IPATH_SDMA_RUNNING and IPATH_SDMA_SHUTDOWN bit numbers to 30 and 31 (instead of 62 and 63) so that we're not setting another booby trap for someone who tries to make ipath work on a 32-bit architecture. Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/ipath: Make ipath_portdata work with struct pid * not pid_tPavel Emelyanov2008-05-133-18/+23
| | | | | | | | | | | | | | | | | | | | | | | | The official reason is "with the presence of pid namespaces in the kernel using pid_t-s inside one is no longer safe." But the reason I fix this right now is the following: About a month ago (when 2.6.25 was not yet released) there still was a one last caller of a to-be-deprecated-soon function find_pid() - the kill_proc() function, which in turn was only used by nfs callback code. During the last merge window, this last caller was finally eliminated by some NFS patch(es) and I was about to finally kill this kill_proc() and find_pid(), but found, that I was late and the kill_proc is now called from the ipath driver since commit 58411d1c ("IB/ipath: Head of Line blocking vs forward progress of user apps"). So here's a patch that fixes this code to use struct pid * and (!) the kill_pid routine. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/ipath: Fix RDMA read response sequence checkingRalph Campbell2008-05-132-0/+8
| | | | | | | | | | If an out of sequence RDMA read response middle or last packet is received, we should only resend the RDMA read request on the first out of sequence packet and drop subsequent out of sequence packets otherwise, we get "too many retries". Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/ipath: Fix many locking issues when switching to error stateRalph Campbell2008-05-138-304/+554
| | | | | | | | | | The send DMA hardware queue voided a number of prior assumptions about when a send is complete which led to completions being generated out of order. There were also a number of locking issues when switching the QP to the error or reset states, and we implement the IB_QPS_SQD state. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/ipath: Fix RC and UC error handlingRalph Campbell2008-05-135-224/+132
| | | | | | | | | | When errors are detected in RC, the QP should transition to the IB_QPS_ERR state, not the IB_QPS_SQE state. Also, when the error is on the responder side, the receive work completion error was incorrect (remote vs. local). Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/ipath: Fix SDMA error recovery in absence of link status changeJohn Gregor2008-05-072-10/+29
| | | | | | | | | | | | | | | | | | | | | | | | What's fixed: in ipath_cancel_sends() We need to unconditionally set ABORTING. So, swap the tests so the set_bit() isn't shadowed by the &&. If we've disarmed the piobufs, then we need to unconditionally set DISARMED. So, move it out from the overly protective if at the bottom. in sdma_abort_task() Abort_task was written knowing that the SDMA engine would always be reset (and restarted) on error. A recent change broke that fundamental assumption by taking the restart portion and making it conditional on a link status change. But, SDMA can go boom without a link status change in some conditions. Signed-off-by: John Gregor <john.gregor@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/ipath: Need to always request and handle PIO avail interruptsDave Olson2008-05-078-202/+224
| | | | | | | | | | | | | | | | | | | | | | | | Now that we always use PIO for vl15 on 7220, we could get stuck forever if we happened to run out of PIO buffers from the verbs code, because the setup code wouldn't run; the interrupt was also ignored if SDMA was supported. We also have to reduce the pio update threshold if we have fewer kernel buffers than the existing threshold. Clean up the initialization a bit to get ordering safer and more sensible, and use the existing ipath_chg_kernavail call to do init, rather than doing it separately. Drop unnecessary clearing of pio buffer on pio parity error. Drop incorrect updating of pioavailshadow when exitting freeze mode (software state may not match chip state if buffer has been allocated and not yet written). If we couldn't get a kernel buffer for a while, make sure we are in sync with hardware, mainly to handle the exitting freeze case. Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/ipath: Fix count of packets received by kernelMichael Albaugh2008-05-071-1/+1
| | | | | | | | | | | The loop in ipath_kreceive() that processes packets increments the loop-index 'i' once too often, because the exit condition does not depend on it, and is checked after the increment. By adding a check for !last to the iterator in the for loop, we correct that in a way that is not so likely to be re-broken by changes in the loop body. Signed-off-by: Michael Albaugh <micheal.albaugh@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/ipath: Return the correct opcode for RDMA WRITE with immediateRalph Campbell2008-05-071-1/+5
| | | | | | | | This patch fixes a bug in the RC responder which generates a completion entry with the wrong opcode when an RDMA WRITE with immediate is received. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/ipath: Fix bug that can leave sends disabled after freeze recoveryDave Olson2008-05-071-2/+6
| | | | | | | | | The semantics of cancel_sends changed, but the code using it was missed. Don't leave sends and pioavail updates disabled, and add a comment as to why the force update is needed. Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/ipath: Only increment SSN if WQE is put on send queueRalph Campbell2008-05-071-1/+1
| | | | | | | | | | If a send work request has immediate errors and is not put on the send queue, we shouldn't update any of the QP state. The increment of the SSN wasn't obeying this. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/ipath: Only warn about prototype chip during initMichael Albaugh2008-05-071-2/+3
| | | | | | | | | | | We warn about prototype chips, but the function that checks for support is also called as a result of a get_portinfo request, which can clutter the logs. Restrict warning to only appear during initialization. Signed-off-by: Michael Albaugh <michael.albaugh@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB: expand ib_umem_get() prototypeArthur Kepner2008-04-291-1/+2
| | | | | | | | | | | | | | | | | | | Add a new parameter, dmasync, to the ib_umem_get() prototype. Use dmasync = 1 when mapping user-allocated CQs with ib_umem_get(). Signed-off-by: Arthur Kepner <akepner@sgi.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Jes Sorensen <jes@sgi.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Roland Dreier <rdreier@cisco.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: David Miller <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* IB/ipath: Correct capitalization "IntX" -> "INTx"Roland Dreier2008-04-212-6/+6
| | | | | | Match what the PCI specification uses. Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/ipath: Remove tests of PCI_MSI in ipath_iba7220.cRoland Dreier2008-04-211-9/+4
| | | | | | | | The PCI MSI interface is stubbed out properly so that all the functions just return failure if PCI_MSI=n, so there's no reason to have "#ifdef CONFIG_PCI_MSI" blocks in ipath_iba7220.c. Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/ipath: Remove dependency on PCI_MSI || HT_IRQRoland Dreier2008-04-211-1/+1
| | | | | | | | | Before IBA7220 support was added, the ipath driver didn't support any hardware unless PCI_MSI and/or HT_IRQ was enabled. However, the IBA7220 can generate INTx interrupts, so it makes sense to allow the driver to be build even if PCI_MSI=n and HT_IRQ=n. Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/ipath: Build IBA7220 code unconditionallyRoland Dreier2008-04-211-2/+4
| | | | | | | | | | | | | | | The new IBA7220 code added a call to ipath_init_iba7220_funcs() that is compiled unconditionally, but only built the IBA7220 code if PCI_MSI is enabled. Fix this by building the IBA7220 file unconditonally. This fixes build breakage when PCI_MSI=n, HT_IRQ=y and INFINIBAND_IPATH=y reported by Ingo Molnar <mingo@elte.hu>: drivers/built-in.o: In function `ipath_init_one': ipath_driver.c:(.devinit.text+0x1e5bc): undefined reference to `ipath_init_iba7220_funcs' Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/ipath: Remove reference to dev->class_dev ↵Roland Dreier2008-04-211-1/+0
| | | | | | | | | | | Commit 124b4dcb ("IB/ipath: add calls to new 7220 code and enable in build") inadvertently added core to set dev->class_dev.dev back into ib_ipath. This is completely redundant since commit 1912ffbb ("IB: Set class_dev->dev in core for nice device symlink"), which removed class_dev setting from low-level drivers, and also will break the build when class_dev is removed completely from struct ib_device. Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/ipath: Fix module parameter description for disable_smaPaul Bolle2008-04-211-1/+1
| | | | | | | | | | Describe disable_sma parameter with its name rather than the internal ib_ipath_disable_sma variable name, so that the description shows up properly in modinfo. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB: convert struct class_device to struct deviceTony Jones2008-04-194-48/+51
| | | | | | | | | | | | | | This converts the main ib_device to use struct device instead of struct class_device as class_device is going away. Signed-off-by: Tony Jones <tonyj@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* IB/core: Add support for "send with invalidate" work requestsRoland Dreier2008-04-164-12/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a new IB_WR_SEND_WITH_INV send opcode that can be used to mark a "send with invalidate" work request as defined in the iWARP verbs and the InfiniBand base memory management extensions. Also put "imm_data" and a new "invalidate_rkey" member in a new "ex" union in struct ib_send_wr. The invalidate_rkey member can be used to pass in an R_Key/STag to be invalidated. Add this new union to struct ib_uverbs_send_wr. Add code to copy the invalidate_rkey field in ib_uverbs_post_send(). Fix up low-level drivers to deal with the change to struct ib_send_wr, and just remove the imm_data initialization from net/sunrpc/xprtrdma/, since that code never does any send with immediate operations. Also, move the existing IB_DEVICE_SEND_W_INV flag to a new bit, since the iWARP drivers currently in the tree set the bit. The amso1100 driver at least will silently fail to honor the IB_SEND_INVALIDATE bit if passed in as part of userspace send requests (since it does not implement kernel bypass work request queueing). Remove the flag from all existing drivers that set it until we know which ones are OK. The values chosen for the new flag is not consecutive to avoid clashing with flags defined in the XRC patches, which are not merged yet but which are already in use and are likely to be merged soon. This resurrects a patch sent long ago by Mikkel Hagen <mhagen@iol.unh.edu>. Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/ipath: Update copyright dates for files changed in 2008Ralph Campbell2008-04-1618-18/+18
| | | | | Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
* IB/ipath: add calls to new 7220 code and enable in buildDave Olson2008-04-1613-136/+896
| | | | | | | | | This patch adds the initialization calls into the new 7220 HCA files, changes the Makefile to compile and link the new files, and code to handle send DMA. Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
OpenPOWER on IntegriCloud