summaryrefslogtreecommitdiffstats
path: root/drivers/ieee1394/sbp2.h
Commit message (Collapse)AuthorAgeFilesLines
* ieee1394: sbp2: change some module parameters from int to boolStefan Richter2007-07-101-1/+1
| | | | | | | | | | | This is upwards compatible, except that integer values other than 0 or 1 are no longer accepted. But values like "Y", "N", "no", "nnoooh!" work now. Also, improve a comment on the serialize_io parameter and make the ORB_SET_EXCLUSIVE macro ultra-safe. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* ieee1394: sbp2: remove unnecessary alignments of struct membersStefan Richter2007-04-301-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | The members "dma_addr_t command_orb_dma" and "dma_addr_t sge_dma" of sbp2.h::sbp2_command_info do not have to be aligned themselves --- only the memory which they point to has to be. The member "struct sbp2_command_orb command_orb" has to be aligned on 4 bytes boundary which is guaranteed because it contains u32 members. The member "struct sbp2_unrestricted_page_table scatter_gather_element", i.e. the SBP-2 s/g table, has to be aligned on 8 bytes boundary according to the SBP-2 spec. This is not a requirement for FireWire controllers but could be expected by SBP-2 targets. I see no need to align the members command_orb and scatter_gather_element on CPU cacheline boundaries. It could have performance benefits, but on the other hand sbp2 has a somewhat wasteful allocation scheme which should be optimized first before further tweaks like cacheline alignments. (E.g. don't always allocate SG_ALL s/g table elements.) Note, before as well as after the patch, the code relies on the assumption that memory alignment in the virtual address space is preserved in the physical address space after DMA mapping. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* ieee1394: sbp2: convert from PCI DMA to generic DMAStefan Richter2006-12-071-1/+1
| | | | | | API conversion without change in functionality Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* sbp2: make 1bit bitfield unsignedLuca Tettamanti2006-12-071-1/+1
| | | | | | | A signed single-bit bitfield doesn't make much sense. Make it unsigned. Signed-off-by: Luca Tettamanti <kronos.it@gmail.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* ieee1394: sbp2: more concise names for types and variablesStefan Richter2006-12-071-7/+8
| | | | | | | | | "struct scsi_id_instance_data" represents a logical unit. Rename it to "struct sbp2_lu", and "scsi_id" to "lu". Rename some other variables too. Wrap almost all lines after at most 80 columns. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* ieee1394: sbp2: remove unused struct membersStefan Richter2006-12-071-6/+0
| | | | Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* ieee1394: sbp2: clean up sbp2_ namespaceStefan Richter2006-12-071-14/+14
| | | | | | | Prepend sbp2*_ to anything globally defined in sbp2.c except for some macros. Strip sbp2_ from names of struct members. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* ieee1394: sbp2: remove superfluous commentsStefan Richter2006-12-071-47/+33
| | | | | | And update and reformat remaining comments. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* ieee1394: sbp2: delayed_work -> work_structStefan Richter2006-12-071-1/+1
| | | | | | | | | This work is not delayed. Also bring the code format in a state which reduces my work to merge pending sbp2 patchs. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* ieee1394: sbp2: coding style of some macrosStefan Richter2006-12-071-77/+78
| | | | | | Adjust parentheses, indentation, line lengths. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* ieee1394: sbp2: clean up function declarationsStefan Richter2006-12-071-45/+0
| | | | | | | | | Remove unnecessary function prototypes. Remove variable names from function prototypes. Move declarations from sbp2.h to sbp2.c. Move definitions of driver templates together near the top of sbp2.c. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* WorkStruct: make allyesconfigDavid Howells2006-11-221-1/+1
| | | | | | Fix up for make allyesconfig. Signed-Off-By: David Howells <dhowells@redhat.com>
* ieee1394: sbp2: prevent rare deadlock in shutdownStefan Richter2006-09-171-1/+8
| | | | | | | | | | | | | | | | | | | Scsi_remove_device() may go into uninterruptible sleep if blocked. Therefore sbp2_remove() unblocks the Scsi_Host before the device is requested to be removed. But there could be another 1394 bus reset after that which would block the host again. The 1394 subsystem won't call sbp2_update() concurrently to sbp2_remove(), which is why there is no chance for sbp2_remove() to be unblocked by sbp2_update(). The fix is to tell sbp2's bus reset handler when a device is to be shut down so that it skips scsi_block_requests() on that host. As before, any new commands after a reset without reconnect will be failed quickly by sbp2scsi_queuecommand(). In the long term, means to go without scsi_block_requests() should be found. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* ieee1394: sbp2: better handling of transport errorsStefan Richter2006-09-171-3/+3
| | | | | | | | | | | If the target signals a transport failure via status block, complete the request with DID_BUSY to indicate to the SCSI subsystem that the command may succeed when retried. Also log diagnostic information if the status block shows a transport related problem. It may point to hardware faults. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* ieee1394: sbp2: handle "sbp2util_node_write_no_wait failed"Stefan Richter2006-09-171-0/+3
| | | | | | | | | | | | | | | | | | | | | | | Fix for http://bugzilla.kernel.org/show_bug.cgi?id=6948 Because sbp2 writes to the target's fetch agent's registers from within atomic context, it cannot sleep to guaranteedly get a free transaction label. This may repeatedly lead to "sbp2util_node_write_no_wait failed" and consequently to SCSI command abortion after timeout. A likely cause is that many queue_command softirqs may occur before khpsbpkt (the ieee1394 driver's thread which cleans up after finished transactions) is woken up to recycle tlabels. Sbp2 now schedules a workqueue job whenever sbp2_link_orb_command fails in sbp2util_node_write_no_wait. The job will reliably get a transaction label because it can sleep. We use the kernel-wide shared workqueue because it is unlikely that the job itself actually needs to sleep. In the improbable case that it has to sleep, it doesn't need to sleep long since the standard transaction timeout is 100ms. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* ieee1394: sbp2: convert sbp2util_down_timeout to waitqueueStefan Richter2006-09-171-2/+2
| | | | | | | | The waitqueue API is used to replace a custom wait mechanism. Only one global waitqueue (instead of per-device waitqueues or completions) is added because there is usually just one waiter. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* ieee1394: sbp2: more checks of status blockStefan Richter2006-09-171-6/+8
| | | | | | | | | | | | | | | - Add checks for the (very unlikely) cases that the target writes too little or too much status data or writes unsolicited status. - Indicate that these and similar conditions are unlikely(). - Check the 'resp' and 'sbp_status' fields for possible failure status. - Slightly optimize access macros for the status block bitfields. - Unify a few related log messages. TODO: Check if 'src'==1, then withhold the respective ORB from reuse until status for any subsequent ORB was received. This is an old bug whose fix requires more complex command queue handling. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* ieee1394: sbp2: discard return value of sbp2_link_orb_commandStefan Richter2006-09-171-5/+0
| | | | | | | Since sbp2 is at the moment unable to do anything with the return value of sbp2_link_orb_command, just discard it. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* ieee1394: sbp2: safer last_orb and next_ORB handlingStefan Richter2006-09-171-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The sbp2 initiator has two ways to tell a target's fetch agent about new command ORBs: - Write the ORB's address to the ORB_POINTER register. This must not be done while the fetch agent is active. - Put the ORB's address into the previously submitted ORB's next_ORB field and write to the DOORBELL register. This may be done while the fetch agent is active or suspended. It must not be done while the fetch agent is in reset state. Sbp2 has a last_orb pointer which indicates in what way a new command should be announced. That pointer is concurrently accessed at various occasions. Furthermore, initiator and target are accessing the next_ORB field of ORBs concurrently and asynchronously. This patch does: - Protect all initiator accesses to last_orb by sbp2_command_orb_lock. - Add pci_dma_sync_single_for_device before a previously submitted ORB's next_ORB field is overwritten. - Insert a memory barrier between when next_ORB_lo and next_ORB_hi are overwritten. Next_ORB_hi must not be updated before next_ORB_lo. - Remove the rather unspecific and now superfluous qualifier "volatile" from the next_ORB fields. - Add comments on how last_orb is connected with what is known about the target's fetch agent's state. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* sbp2: use __attribute__((packed)) for on-the-wire structuresBen Collins2006-06-121-9/+9
| | | | | | | | It seems to have worked without the attribute during all the years just because sizes of all struct members are multiples of 32 bits. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
* sbp2: remove manipulation of inquiry responseBen Collins2006-06-121-3/+2
| | | | | | | | | | | | | | This code became ineffective a few Linux releases ago and is not required anyway. Note from Christoph Hellwig: scsi_cmnd.request_buffer is always a scatterlist these days. Checking random bites into it and then mangling the data in sbp2_check_sbp2_response will cause really bad memory corruption when you're not lucky enough to have the check not trigger by luck. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Ben Collins <bcollins@ubuntu.com>
* [PATCH] sbp2: add ability to override hardwired blacklistStefan Richter2006-05-171-0/+1
| | | | | | | | | In case the blacklist with workarounds for device bugs yields a false positive, the module load parameter can now also be used as an override instead of an addition to the blacklist. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sbp2: add read_capacity workaround for iPodStefan Richter2006-05-171-0/+1
| | | | | | | | | | | | | | | | | | | | Apple decided to copy some USB stupidity over to FireWire. The sector number returned by iPods from read_capacity is one too many. This may cause I/O errors, especially if the kernel is configured for EFI partition support. We use the same workaround as usb-storage but have to check for different model IDs. http://marc.theaimsgroup.com/?t=114233262300001 https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=187409 Acknowledgements: Diagnosis and therapy by Mathieu Chouquet-Stringer <ml2news@free.fr>, additional data about affected and unaffected Apple hardware from Vladimir Kotal, Sander De Graaf, Bryan Olmstead and Hugh Dixon. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] sbp2: consolidate workaroundsStefan Richter2006-05-171-10/+6
| | | | | | | | | | | | | | | | | | Grand unification of the three types of workarounds we have so far. The "skip mode page 8" workaround is now limited to devices which pretend to be of TYPE_DISK instead of TYPE_RBC. This workaround is no longer enabled for Initio bridges. Patch update in anticipation of more workarounds: - Add module parameter "workarounds". - Deprecate parameter "force_inquiry_hack". - Compose the blacklist of a compound type for better readability and extensibility. - Remove a now unused #define. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* sbp2: variable status FIFO address (fix login timeout)Stefan Richter2006-02-231-41/+23
| | | | | | | | | | | | | | | | | | | | | | | | Let the ieee1394 core select a suitable 1394 address range for sbp2's status FIFO instead of using a fixed range. Since the core only selects addresses which are guaranteed to be out of the "physical range" as per OHCI 1.1, this patch also fixes an old bug: OHCI controllers which implement a writeable PhysicalUpperBound register included sbp2's status FIFO in the physical range. That way sbp2 was never notified of a succesful login and always failed after timeout. Affected OHCI host adapters include ALi and Fujitsu controllers. As another side effect of this patch, the status FIFO is no longer located in a range for which OHCI chips perform "posted writes". Each status write now requires a response subaction. But since large data transfers involve only few status writes, there is no measurable decrease of I/O throughput. What's more, the status FIFO is now safe from potential host bus errors. Nevertheless, posted writes could be re-enabled by extensions to the ARM features of the 1394 stack. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Jody McIntyre <scjody@modernduck.com> (cherry picked from b2d38cccad4ef80d6b672b8f89aae5fe2907b113 commit)
* sbp2: split sbp2_create_command_orb() for better readabilityStefan Richter2005-12-131-7/+0
| | | | | | | | | | sbp2_create_command_orb() code cleanup: - add two helper functions to reduce nesting depth - omit the return value which was always ignored - remove unnecessary declaration from sb2.h Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Jody McIntyre <scjody@modernduck.com>
* sbp2: delete sbp2scsi_direction_tableStefan Richter2005-12-121-39/+1
| | | | | | | | DMA_BIDIRECTIONAL data direction may be handled properly by Linux in the future. For now, reject it instead to convert it to another direction. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Jody McIntyre <scjody@modernduck.com>
* sbp2, ohci1394 cleanups:Stefan Richter2005-11-071-9/+6
| | | | | | | | sbp2: various code formatting cleanups ohci1394: remove form feed characters Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Jody McIntyre <scjody@modernduck.com>
* sbp2: Remove our tracking of device type,Ben Collins2005-11-071-6/+1
| | | | | | | | | since we no longer need to worry about it. Depends on patch "ieee1394: remove sbp2's TYPE_RBC and 10byte handling". Signed-off-by: Ben Collins <bcollins@debian.org> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Jody McIntyre <scjody@modernduck.com>
* sbp2: Merge TYPE_RBC and 10byte removal patch from scsi maintainers.Ben Collins2005-11-071-1/+0
| | | | | | | | Added more cleanups to remove unused code. Signed-off-by: Ben Collins <bcollins@debian.org> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Jody McIntyre <scjody@modernduck.com>
* [SCSI] TYPE_RBC cache fixes (sbp2.c affected)Al Viro2005-05-261-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | a) TYPE_SDAD renamed to TYPE_RBC and taken to scsi.h b) in sbp2.c remapping of TYPE_RPB to TYPE_DISK turned off c) relevant places in midlayer and sd.c taught to accept TYPE_RBC d) sd.c::sd_read_cache_type() looks into page 6 when dealing with TYPE_RBC - these guys have writeback cache flag there and are not guaranteed to have page 8 at all. e) sd_read_cache_type() got an extra sanity check - it checks that it got the page it asked for before using its contents. And screams if mismatch had happened. Rationale: there are broken devices out there that are "helpful" enough to go for "I don't have a page you've asked for, here, have another one". For example, PL3507 had been caught doing just that... f) sbp2 sets sdev->use_10_for_rw and sdev->use_10_for_ms instead of bothering to remap READ6/WRITE6/MOD_SENSE, so most of the conversions in there are gone now. Incidentally, I wonder if USB storage devices that have no mode page 8 are simply RBC ones. I haven't touched that, but it might be interesting to check... Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds2005-04-161-0/+484
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
OpenPOWER on IntegriCloud