summaryrefslogtreecommitdiffstats
path: root/drivers/ide/pci/it821x.c
Commit message (Collapse)AuthorAgeFilesLines
* it821x: do not describe noraid parameter with its valuePaul Bolle2008-04-171-1/+1
| | | | | | | Describe noraid parameter with its name (and not its value). Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: remove needless includes from PCI host driversBartlomiej Zolnierkiewicz2008-02-021-3/+0
| | | | Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: add ->cable_detect method to ide_hwif_tBartlomiej Zolnierkiewicz2008-02-021-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Add ->cable_detect method to ide_hwif_t. * Call the new method in ide_init_port() if: - the host supports UDMA modes > UDMA2 ('hwif->ultra_mask & 78') - DMA initialization was successful (if hwif->dma_base is not set ide_init_port() sets hwif->ultra_mask to zero) - "idex=ata66" is not used ('hwif->cbl != ATA_CBL_PATA40_SHORT') * Convert PCI host drivers to use ->cable_detect method. While at it: * Factor out cable detection to separate functions (if not already done). * hpt366.c/it8213.c/slc90e66.c: - don't check cable type if "idex=ata66" is used * pdc202xx_new.c: - add __devinit tag to pdcnew_cable_detect() * pdc202xx_old.c: - rename pdc202xx_old_cable_detect() to pdc2026x_old_cable_detect() - add __devinit tag to pdc2026x_old_cable_detect() Reviewed-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: delete filenames/versions from commentsBartlomiej Zolnierkiewicz2008-02-011-3/+0
| | | | | | | | | | | | | | | Delete filenames/versions from comments. I'm leaving decisions about adding DRV_VERSION defines and MODULE_VERSION()-s to maintainers of the respective drivers. While at it: * Remove unused VERSION define from ide.c. * Remove unused/stale DRV_VERSION define from au1xxx-ide.c. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: keep pointer to struct device instead of struct pci_dev in ide_hwif_tBartlomiej Zolnierkiewicz2008-02-011-19/+28
| | | | | | | | | | | Keep pointer to struct device instead of struct pci_dev in ide_hwif_t. While on it: * Use *dev->dma_mask instead of pci_dev->dma_mask in ide_toggle_bounce(). There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: merge ->fixup and ->quirkproc methodsBartlomiej Zolnierkiewicz2008-01-261-25/+12
| | | | | | | | | | | | | | | | | | | | | | | | | * Assign drive->quirk_list in ->quirkproc implementations: - hpt366.c::hpt3xx_quirkproc() - pdc202xx_new.c::pdcnew_quirkproc() - pdc202xx_old.c::pdc202xx_quirkproc() * Make ->quirkproc void. * Move calling ->quirkproc from do_identify() to probe_hwif(). * Convert it821x_fixups() to it821x_quirkproc() in it821x.c. * Convert siimage_fixup() to sil_quirkproc() in siimage.c, also remove no longer needed drive->present check from is_dev_seagate_sata(). * Convert ide_undecoded_slave() to accept 'drive' instead of 'hwif' as an argument. Then convert ide_register_hw() to accept 'quirkproc' argument instead of 'fixup' one. * Remove no longer needed ->fixup method. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* it821x/jmicron: fix return value of {it821x,jmicron}_init_one()Bartlomiej Zolnierkiewicz2007-11-131-2/+1
| | | | Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds2007-10-191-2/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (74 commits) fix do_sys_open() prototype sysfs: trivial: fix sysfs_create_file kerneldoc spelling mistake Documentation: Fix typo in SubmitChecklist. Typo: depricated -> deprecated Add missing profile=kvm option to Documentation/kernel-parameters.txt fix typo about TBI in e1000 comment proc.txt: Add /proc/stat field small documentation fixes Fix compiler warning in smount example program from sharedsubtree.txt docs/sysfs: add missing word to sysfs attribute explanation documentation/ext3: grammar fixes Documentation/java.txt: typo and grammar fixes Documentation/filesystems/vfs.txt: typo fix include/asm-*/system.h: remove unused set_rmb(), set_wmb() macros trivial copy_data_pages() tidy up Fix typo in arch/x86/kernel/tsc_32.c file link fix for Pegasus USB net driver help remove unused return within void return function Typo fixes retrun -> return x86 hpet.h: remove broken links ...
| * Fix misspellings of "system", "controller", "interrupt" and "necessary".Robert P. J. Day2007-10-191-2/+2
| | | | | | | | | | | | | | | | Fix the various misspellings of "system", controller", "interrupt" and "[un]necessary". Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
* | ide: constify struct ide_port_infoBartlomiej Zolnierkiewicz2007-10-201-1/+1
| | | | | | | | Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* | ide: replace ide_pci_device_t by struct ide_port_infoBartlomiej Zolnierkiewicz2007-10-201-1/+1
|/ | | | | | | | | | | | | | | | * Rename struct ide_pci_device_s to struct ide_port_info. * Remove ide_pci_device_t typedef. While at it: * Fix __ide_pci_register_driver() comment. * Fix aec62xx_init_one() comment. * Remove unused 'cds' field from ide_hwgroup_t. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: set drive->autotune in ide_pci_setup_ports()Bartlomiej Zolnierkiewicz2007-10-191-3/+0
| | | | | | | | | | | | | | | | | | | | | | | Majority of host drivers using IDE PCI layer set drive->autotune, the only exceptions are: generic.c ns87415.c rz1000.c trm290.c * no ->set_pio_mode method it821x.c: * if memory allocation fails drive->autotune won't be set (but there also won't be ->set_pio_mode method in such case) piix.c: * MPIIX controller (no ->init_hwif method so also no ->set_pio_mode method) However if there is no ->set_pio_mode method there are no changes in behavior w.r.t. PIO tuning so always set drive->autotune in ide_pci_setup_ports(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: add ->mwdma_mask and ->swdma_mask to ide_pci_device_t (take 2)Bartlomiej Zolnierkiewicz2007-10-191-2/+2
| | | | | | | | | | | | | | | | | | | | | | | * Add ->mwdma_mask and ->swdma_mask to ide_pci_device_t. * Set ide_hwif_t DMA masks using DMA masks from ide_pci_device_t in setup-pci.c::ide_pci_setup_ports() (iff DMA base is valid and ->init_hwif method may still override them). * Convert IDE PCI host drivers to use ide_pci_device_t DMA masks. While at it: * Use ATA_{UDMA,MWDMA,SWDMA}* defines. * hpt34x.c: add separate ide_pci_device_t instances for HPT343 and HPT345. * serverworks.c: fix DMA masks being set before checking DMA base. v2: * Add missing masks to DECLARE_GENERIC_PCI_DEV() macro. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: add IDE_HFLAG_NO_{DMA,AUTODMA} host flagsBartlomiej Zolnierkiewicz2007-10-191-1/+0
| | | | | | | | Add IDE_HFLAG_NO_{DMA,AUTODMA} host flags. Convert all host drivers using ide_pci_device_t to use these flags instead of d->autodma and then remove no longer needed d->autodma. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: add IDE_HFLAG_BOOTABLE host flagBartlomiej Zolnierkiewicz2007-10-191-1/+1
| | | | | | | | Add IDE_HFLAG_BOOTABLE host flag and IDE_HFLAG_OFF_BOARD define. Convert all host drivers using ide_pci_device_t to use IDE_HFLAG_{BOOTABLE,OFF_BOARD} instead of d->bootable and then remove no longer needed d->bootable. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: add IDE_HFLAG_NO_ATAPI_DMA host flagBartlomiej Zolnierkiewicz2007-10-191-7/+5
| | | | | | | Add IDE_HFLAG_NO_ATAPI_DMA host flag and set it in host drivers which don't support ATAPI DMA. Then remove no longer needed hwif->atapi_dma. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: remove hwif->autodma and drive->autodmaBartlomiej Zolnierkiewicz2007-10-161-17/+5
| | | | | | | | | | | | | | | | | | | | | | | | | * hpt34x.c: disable DMA masks for HPT345 (hwif->autodma is zero so DMA won't be enabled anyway). * trm290.c: disable IDE_HFLAG_TRUST_BIOS_FOR_DMA flag (hwif->autodma is zero so DMA won't be enabled anyway). * Check noautodma global variable instead of drive->autodma in ide_tune_dma(). This fixes handling of "ide=nodma" kernel parameter for icside, ide-cris, au1xxx-ide, pmac, it821x, jmicron, sgiioc4 and siimage host drivers. * Remove hwif->autodma (it was not checked by IDE core code anyway) and drive->autodma (was set by all host drivers - except HPT345/TRM290 special cases - unless "ide=nodma" was used). While at it: - remove needless printk() from icside.c - remove stale FIXME/comment from ide-probe.c - don't force DMA off if PCI bus-mastering had to be enabled in setup-pci.c (this setting was always later over-ridden by host drivers anyway) Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: use PCI_VDEVICE() macroBartlomiej Zolnierkiewicz2007-10-161-3/+3
| | | | | | | | | While at it: - make struct pci_device_id tables const - use PCI_DEVICE_ID_ITE_8213 define in it8213.c - fix comment in generic.c Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: remove ->ide_dma_check (take 2)Bartlomiej Zolnierkiewicz2007-10-161-22/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Add IDE_HFLAG_TRUST_BIOS_FOR_DMA host flag for host drivers that depend on BIOS for programming device/controller for DMA. Set it in cy82c693, generic, ns87415, opti621 and trm290 host drivers. * Add IDE_HFLAG_VDMA host flag for host drivers using VDMA. Set it in cs5520 host driver. * Teach ide_tune_dma() about IDE_HFLAG_TRUST_BIOS_FOR_DMA flag. * Add generic ide_dma_check() helper and remove all open coded ->ide_dma_check implementations. Fix all places checking for presence of ->ide_dma_check hook to check for ->ide_dma_on instead. * Remove no longer needed code from config_drive_for_dma(). * Make ide_tune_dma() static. v2: * Fix config_drive_for_dma() return values. * Fix ide-dma.c build for CONFIG_BLK_DEV_IDEDMA_PCI=n by adding dummy config_drive_for_dma() inline. * Fix IDE_HFLAG_TRUST_BIOS_FOR_DMA handling in ide_dma_check(). * Fix init_hwif_it8213() comment. There should be no functionality changes caused by this patch. Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: move ide_config_drive_speed() calls to upper layers (take 2)Bartlomiej Zolnierkiewicz2007-10-131-61/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Convert {ide_hwif_t,ide_pci_device_t}->host_flag to be u16. * Add IDE_HFLAG_POST_SET_MODE host flag to indicate the need to program the host for the transfer mode after programming the device. Set it in au1xxx-ide, amd74xx, cs5530, cs5535, pdc202xx_new, sc1200, pmac and via82cxxx host drivers. * Add IDE_HFLAG_NO_SET_MODE host flag to indicate the need to completely skip programming of host/device for the transfer mode ("smart" hosts). Set it in it821x host driver and check it in ide_tune_dma(). * Add ide_set_pio_mode()/ide_set_dma_mode() helpers and convert all direct ->set_pio_mode/->speedproc users to use these helpers. * Move ide_config_drive_speed() calls from ->set_pio_mode/->speedproc methods to callers. * Rename ->speedproc method to ->set_dma_mode, make it void and update all implementations accordingly. * Update ide_set_xfer_rate() comments. * Unexport ide_config_drive_speed(). v2: * Fix issues noticed by Sergei: - export ide_set_dma_mode() instead of moving ->set_pio_mode abuse wrt to setting DMA modes from sc1200_set_pio_mode() to do_special() - check IDE_HFLAG_NO_SET_MODE in ide_tune_dma() - check for (hwif->set_pio_mode) == NULL in ide_set_pio_mode() - check for (hwif->set_dma_mode) == NULL in ide_set_dma_mode() - return -1 from ide_set_{pio,dma}_mode() if ->set_{pio,dma}_mode == NULL - don't set ->set_{pio,dma}_mode on it821x in "smart" mode - fix build problem in pmac.c - minor fixes in au1xxx-ide.c/cs5530.c/siimage.c - improve patch description Changes in behavior caused by this patch: - HDIO_SET_PIO_MODE ioctl would now return -ENOSYS for attempts to change PIO mode if it821x controller is in "smart" mode - removal of two debugging printk-s (from cs5530.c and sc1200.c) - transfer modes 0x00-0x07 passed from user space may be programmed twice on the device (not really an issue since 0x00 is not supported correctly by any host driver ATM, 0x01 is not supported at all and 0x02-0x07 are invalid) Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: use only ->set_pio_mode method for programming PIO modes (take 2)Bartlomiej Zolnierkiewicz2007-10-111-9/+0
| | | | | | | | | | | | | Use ->set_pio_mode method to program PIO modes in ide_set_xfer_rate() (the only place which used ->speedproc to program PIO modes) and remove handling of PIO modes from all ->speedproc implementations. v2: * Fix pmac_ide_tune_chipset() comment. There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: add ide_set{_max}_pio() (take 4)Bartlomiej Zolnierkiewicz2007-10-111-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Add IDE_HFLAG_ABUSE_{PREFETCH,FAST_DEVSEL,DMA_MODES} flags and set them in ht6560, cmd640, cmd64x and sc1200 host drivers. * Add set_pio_mode_abuse() for checking if host driver has a non-standard ->tuneproc() implementation and use it in do_special(). * Add ide_set_pio() for setting PIO mode (it uses hwif->pio_mask to find the maximum PIO mode supported by the host), also add ide_set_max_pio() wrapper for ide_set_pio() to use for auto-tuning. Convert users of ->tuneproc to use ide_set{_max}_pio() where possible. This leaves only do_special(), set_using_pio(), ide_hwif_restore() and ide_set_pio() as a direct users of ->tuneproc. * Remove no longer needed ide_get_best_pio_mode() calls and printk-s reporting PIO mode selected from ->tuneproc implementations. * Rename ->tuneproc hook to ->set_pio_mode and make 'pio' argument const. * Remove stale comment from ide_config_drive_speed(). v2: * Fix "ata_" prefix (Noticed by Jeff). v3: * Minor cleanups/fixups per Sergei's suggestions. v4: * Fix compile problem in drivers/ide/pci/cmd640.c (Noticed by Andrew Morton). * Improve some ->set_pio_mode comments. Reviewed-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: move ide_rate_filter() calls to the upper layer (take 2)Bartlomiej Zolnierkiewicz2007-10-111-7/+3
| | | | | | | | | | | | | | | | * Move ide_rate_filter() calls from host drivers to IDE core. * Make ide_rate_filter() static. * Make 'speed' argument of ->speedproc const. v2: * Fix it8213_tune_chipset() comment. There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: add PIO masksBartlomiej Zolnierkiewicz2007-07-201-1/+2
| | | | | | | | | | | | | * Add ATA_PIO[0-6] defines to <linux/ata.h>. * Add ->pio_mask field to ide_pci_device_t and ide_hwif_t. * Add PIO masks to host drivers. <linux/ata.h> change ACK-ed by Jeff Garzik <jeff@garzik.org>. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: drop "PIO data" argument from ide_get_best_pio_mode()Bartlomiej Zolnierkiewicz2007-07-201-2/+2
| | | | | | | | | | * Drop no longer needed "PIO data" argument from ide_get_best_pio_mode() and convert all users accordingly. * Remove no longer needed ide_pio_data_t. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: add ide_pci_device_t.host_flags (take 2)Bartlomiej Zolnierkiewicz2007-07-201-1/+0
| | | | | | | | | | | | | | | | | | * Rename ide_pci_device_t.flags to ide_pci_device_t.host_flags and IDEPCI_FLAG_ISA_PORTS flag to IDE_HFLAG_ISA_PORTS. * Add IDE_HFLAG_SINGLE flag for single channel devices. * Convert core code and all IDE PCI drivers to use IDE_HFLAG_SINGLE and remove no longer needed ide_pci_device_t.channels field. v2: * Fix issues noticed by Sergei: - correct code alignment in scc_pata.c - s/IDE_HFLAG_SINGLE/~IDE_HFLAG_SINGLE/ in serverworks.c Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: add short cables supportBartlomiej Zolnierkiewicz2007-07-091-4/+5
| | | | | | | | | | | | | | | | | | | | | | This patch allows users to override both host and device side cable detection with "ideX=ata66" kernel parameter. Thanks to this it should be now possible to use UDMA > 2 modes on systems (laptops mainly) which use short 40-pin cable instead of 80-pin one. Next patches add automatic detection of some systems using short cables. Changes: * Rename hwif->udma_four to hwif->cbl and make it u8. * Convert all existing users accordingly (use ATA_CBL_* defines while at it). * Add ATA_CBL_PATA40_SHORT support to ide-iops.c:eighty_ninty_three(). * Use ATA_CBL_PATA40_SHORT for "ideX=ata66" kernel parameter. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Reviewed-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
* it821x: fix incorrect SWDMA maskBartlomiej Zolnierkiewicz2007-07-031-2/+1
| | | | | | | | | | | | | SWDMA modes are unsupported by it821x. Attempts to tune SWDMA modes always fail (due to sanity check in ->speedproc) and result in PIO being tuned. * Fix incorrect SWDMA mask so core code won't try these modes and will just tune PIO if no other DMA modes are available. * Bump driver version. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
* it821x: RAID mode fixesBartlomiej Zolnierkiewicz2007-06-081-16/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The DMA support for RAID mode broke after: commit 71ef51cc1756d1c56b57c70e7cc27a3559c81ee6 Author: Jens Axboe <axboe@suse.de> Date:   Fri Jul 28 09:02:17 2006 +0200     [PATCH] it821x: fix ide dma setup bug     Only enable dma for a valid speed setting.     Signed-off-by: Jens Axboe <axboe@suse.de> commit 0a8348d08677ad77ee353f96eb8745c693a05a13 Author: Jens Axboe <axboe@suse.de> Date:   Fri Jul 28 08:58:26 2006 +0200     [PATCH] ide: if the id fields looks screwy, disable DMA     It's the safer choice. Originally due to a bug in itx821x, but a     generally sound thing to do.     Signed-off-by: Jens Axboe <axboe@suse.de> However it worked by pure luck before Jens' fixes: bogus ide_dma_enable() usage in it821x driver combined with loosy check in ide_dma_verbose() allowed the hardware to operate in DMA mode. When these problems were fixed the DMA support broke... The source root for the regression turned out to be that the it821x.c code was clearing too much of id->field_valid. The IDE core code was using the original value of id->field_valid to do the tuning but later DMA got disabled in ide_dma_verbose() because of the incorrect id->field_valid fixup. Fix it. While at it: * Do fixup() after probing the drives but before tuning them (which is also OK w.r.t. ide_undecoded_slave() fixup). This change fixes device IDENTIFY data to be consistent before/after the tuning and allows us to remove extra re-tuning of drives from it821x_fixups(). * Fake MWDMA0 enabled/supported bits in IDENTIFY data if the device has DMA capable bit set (this is just to tell the IDE core that DMA is supported since it821x firmware takes care of DMA mode programming). * Don't touch timing registers and don't program transfer modes on devices et all when in RAID mode - depend solely on firmware to do the tuning (as suggested by Alan Cox and done in libata pata_it821x driver). Thanks for testing the patch goes out to Thomas Kuther. Cc: Thomas Kuther <gimpel@sonnenkinder.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Jens Axboe <axboe@suse.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: use ide_tune_dma() part #2Bartlomiej Zolnierkiewicz2007-05-161-20/+1
| | | | | | Use ide_tune_dma() in ide-cris/it821x/pdc202xx_old/serverworks drivers. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: rework the code for selecting the best DMA transfer mode (v3)Bartlomiej Zolnierkiewicz2007-05-101-18/+2
| | | | | | | | | | | | | | | | | | | | | | | | | Depends on the "ide: fix UDMA/MWDMA/SWDMA masks" patch. * add ide_hwif_t.udma_filter hook for filtering UDMA mask (use it in alim15x3, hpt366, siimage and serverworks drivers) * add ide_max_dma_mode() for finding best DMA mode for the device (loosely based on some older libata-core.c code) * convert ide_dma_speed() users to use ide_max_dma_mode() * make ide_rate_filter() take "ide_drive_t *drive" as an argument instead of "u8 mode" and teach it to how to use UDMA mask to do filtering * use ide_rate_filter() in hpt366 driver * remove no longer needed ide_dma_speed() and *_ratemask() * unexport eighty_ninty_three() v2: * rename ->filter_udma_mask to ->udma_filter [ Suggested by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ] v3: * updated for scc_pata driver (fixes XFER_UDMA_6 filtering for user-space originated transfer mode change requests when 100MHz clock is used) Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* it821x: PIO mode setup fixesBartlomiej Zolnierkiewicz2007-05-051-68/+58
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * limit max PIO mode to PIO4, this driver doesn't support PIO5 and attempt to setup PIO5 by it821x_tuneproc() could result in incorrect PIO timings + incorrect base clock being set for controller in the passthrough mode * move code limiting max PIO according to the pair device capabilities from config_it821x_chipset_for_pio() to it821x_tuneproc() so the check is also applied for mode change requests coming through ->tuneproc and ->speedproc interfaces * set device speed in it821x_tuneproc() * in it821x_tune_chipset() call it821x_tuneproc() also if the controller is in the smart mode (so the check for pair device max PIO is done) * rename it821x_tuneproc() to it821x_tune_pio(), then add it821x_tuneproc() wrapper which does the max PIO mode check; it worked by the pure luck previously, pio[4] and pio_want[4] arrays were used with index == 255 so random PIO timings and base clock were set for the controller in the passthrough mode, thankfully PIO timings and base clock were corrected later by config_it821x_chipset_for_pio() call (but it was not called for PIO-only devices during resume and for user requested PIO autotuning) * remove config_it821x_chipset_for_pio() call from config_chipset_for_dma() as the driver sets ->autotune to 1 and ->tuneproc does the proper job now * convert the last user of config_it821x_chipset_for_pio() to use it821x_tuneproc(drive, 255) and remove no longer needed function While at it: * fix few comments * bump driver version Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: make ide_hwif_t.ide_dma_{host_off,off_quietly} void (v2)Bartlomiej Zolnierkiewicz2007-02-171-1/+1
| | | | | | | | | | | | | | | | * since ide_hwif_t.ide_dma_{host_off,off_quietly} always return '0' make these functions void and while at it drop "ide_" prefix * fix comment for __ide_dma_off_quietly() * make __ide_dma_{host_off,off_quietly,off}() void and drop "__" prefix v2: * while at it rename atiixp_ide_dma_host_off() to atiixp_dma_host_off(), sgiioc4_ide_dma_{host_off,off_quietly}() to sgiioc4_dma_{host_off,off_quietly}() and sl82c105_ide_dma_off_quietly() to sl82c105_dma_off_quietly() [ Noticed by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: add ide_set_dma() helper (v2)Bartlomiej Zolnierkiewicz2007-02-171-7/+5
| | | | | | | | | | | | | | * add ide_set_dma() helper and make ide_hwif_t.ide_dma_check return -1 when DMA needs to be disabled (== need to call ->ide_dma_off_quietly) 0 when DMA needs to be enabled (== need to call ->ide_dma_on) 1 when DMA setting shouldn't be changed * fix IDE code to use ide_set_dma() instead if using ->ide_dma_check directly v2: * updated for scc_pata Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* [PATCH] it821x: fix ide dma setup bugJens Axboe2006-07-281-3/+8
| | | | | | Only enable dma for a valid speed setting. Signed-off-by: Jens Axboe <axboe@suse.de>
* [PATCH] Fix problem with ATAPI DMA on IT8212 in LinuxAlan Cox2006-07-011-0/+2
| | | | | | | | | | Missing variable initialisation would mean it would sometimes not put ATAPI devices into DMA by default. Signed-off-by: Alan Cox <alan@redhat.com> Cc: <Jack.Lee@ite.com.tw> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Remove obsolete #include <linux/config.h>Jörn Engel2006-06-301-1/+0
| | | | | Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* [PATCH] ide: set latency when resetting it821x out of firmware modeAlan Cox2006-02-031-1/+1
| | | | | | | Signed-off-by: Alan Cox <alan@redhat.com> Acked-by: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] ide: kmalloc + memset -> kzalloc conversionDeepak Saxena2005-11-071-2/+1
| | | | | | Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] ide: it8212 backport for Bartlomiej IDEAlan Cox2005-06-271-0/+812
This lets you throw out the iteraid stuff that has ended up back in due to stupid goings on in the IDE world. Its the same heavily tested code shipped in Fedora/Red Hat products but without the other dependancies on the Bartlomiej IDE layer. Pre-requisite: the ide-disk patch I sent to handle pure LBA devices. Obviously you lose things like hot unplug with the Bartlomiej IDE layer at the moment but that won't matter to most users. The patch does the following - Add IT8211/12 to pci_ids.h - Add Makefile/Kconfig entry - Add it8212 driver No core IDE code is touched by this diff Embedded system testing and the ability to force raid mode off by David Howells Made possible by the ite reference code, documentation and also several clarifications and pieces of assistance provided by ITE themselves Signed-off-by: Alan Cox <alan@redhat.com> Acked-by: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
OpenPOWER on IntegriCloud