summaryrefslogtreecommitdiffstats
path: root/drivers/ide/ide-acpi.c
Commit message (Collapse)AuthorAgeFilesLines
* ide: simplify 'struct ide_taskfile'Sergei Shtylyov2009-04-081-1/+1
| | | | | | | | | | | | Make 'struct ide_taskfile' cover only 8 register values and thus put two such fields ('tf' and 'hob') into 'struct ide_cmd', dropping unnecessary 'tf_array' field from it. This required changing the prototype of ide_get_lba_addr() and ide_tf_dump(). Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> [bart: fix setting of ATA_LBA bit for LBA48 commands in __ide_do_rw_disk()] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: replace IDE_TFLAG_* flags by IDE_VALID_*Sergei Shtylyov2009-04-081-1/+2
| | | | | | | | | | | Replace IDE_TFLAG_{IN|OUT}_* flags meaning to the taskfile register validity on input/output by the IDE_VALID_* flags and introduce 4 symmetric 8-bit register validity indicator subfields, 'valid.{input/output}.{tf|hob}', into the 'struct ide_cmd' instead of using the 'tf_flags' field for that purpose (this field can then be turned from 32-bit into 8-bit one). Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: remove ide_task_t typedefBartlomiej Zolnierkiewicz2009-03-271-5/+5
| | | | | | | | | | | | | | While at it: - rename struct ide_task_s to struct ide_cmd - remove stale comments from idedisk_{read_native,set}_max_address() - drop unused 'cmd' argument from ide_{cmd,task}_ioctl() - drop unused 'task' argument from tx4939ide_tf_load_fixup() - rename ide_complete_task() to ide_complete_cmd() - use consistent naming for struct ide_cmd variables There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide-acpi: remove taskfile_load_raw()Bartlomiej Zolnierkiewicz2009-03-241-47/+24
| | | | | | | | | | | | | * taskfile_load_raw() is used only by do_drive_set_taskfiles() so inline it there. While at it: - rename 'args' variable to 'task' - remove struct taskfile_array - do ide_acpigtf check early - use REGS_PER_GTF Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide-acpi: cleanup do_drive_set_taskfiles()Bartlomiej Zolnierkiewicz2009-03-241-20/+1
| | | | | | | | | | | | | | * ide_noacpi is already checked by ide_acpi_exec_tfs() which is the only user of do_drive_set_taskfiles(). * ide_acpi_exec_tfs() prints sufficient debug info about the device so no need to do it again. * do_drive_get_GTF() + ide_acpi_exec_tfs() make sure that this function will never be called with incorrect gtf_length argument or if device is not present. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide-acpi: cleanup do_drive_get_GTF()Bartlomiej Zolnierkiewicz2009-03-241-27/+0
| | | | | | | | | | | | | | * ide_noacpi is already checked by ide_acpi_exec_tfs() which is the only user of do_drive_get_GTF(). * ide_acpi_exec_tfs() prints sufficient debug info about the device so no need to have excessive data about port/host. * It is sufficient to check for drive->acpidata->obj_handle as it will be NULL if dev == NULL or hwif->acpidata == NULL or device is not present. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: sanitize ACPI initializationBartlomiej Zolnierkiewicz2009-03-241-9/+3
| | | | | | | | | | | * ide_acpi_init() -> ide_acpi_init_port() * ide_acpi_blacklist() -> ide_acpi_init() * Call ide_acpi_init() only once (do it during IDE core initialization) and cleanup the function accordingly. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: add ide_for_each_present_dev() iteratorBartlomiej Zolnierkiewicz2009-03-241-20/+10
| | | | | | | | | | * Add ide_for_each_present_dev() iterator and convert IDE code to use it. * Do some drive-by CodingStyle fixups in ide-acpi.c while at it. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide-acpi: init ACPI handles early for devicesBartlomiej Zolnierkiewicz2009-03-241-44/+21
| | | | | | | Init ACPI handles for devices in ide_acpi_port_init_devices() and remove no longer needed ide_acpi_drive_get_handle(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide-acpi: no need to zero ->acpidata for devicesBartlomiej Zolnierkiewicz2009-03-241-2/+0
| | | | | | ide_acpi_init() takes care of it. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers2009-02-021-1/+1
| | | | | | | Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: linux-ide@vger.kernel.org Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* Merge branch 'linus' into releaseLen Brown2009-01-091-15/+11
|\
| * ide: add port and host iteratorsBartlomiej Zolnierkiewicz2009-01-061-9/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add ide_port_for_each_dev() / ide_host_for_each_port() iterators and update IDE code to use them. While at it: - s/unit/i/ variable in ide_port_wait_ready(), ide_probe_port(), ide_port_tune_devices(), ide_port_init_devices_data(), do_reset1(), ide_acpi_set_state() and scc_dma_end() - s/d/i/ variable in ide_proc_port_register_devices() There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * ide: dynamic allocation of device structuresBartlomiej Zolnierkiewicz2009-01-061-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allocate device structures dynamically instead of having them embedded in ide_hwif_t: * Remove needless zeroing of port structure from ide_init_port_data(). * Add ide_hwif_t.devices[MAX_DRIVES] (table of pointers to the devices). * Add ide_port_{alloc,free}_devices() helpers and use them respectively in ide_{host,free}_alloc(). * Convert all users of ->drives[] to use ->devices[] instead. While at it: * Use drive->dn for the slave device check in scc_pata.c. As a nice side-effect this patch cuts ~1kB (x86-32) from the resulting code size: text data bss dec hex filename 53963 1244 237 55444 d894 drivers/ide/ide-core.o.before 52981 1244 237 54462 d4be drivers/ide/ide-core.o.after Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * ide: remove HWIF() macroBartlomiej Zolnierkiewicz2009-01-061-2/+2
| | | | | | | | Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
| * ide: fix IDE ACPI regression breaking suspendBartlomiej Zolnierkiewicz2008-12-291-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 4dde4492d850a4c9bcaa92e5bd7f4eebe3e2f5ab ("ide: make drive->id an union (take 2)") accidentally introduced an IDE ACPI regression which at least on some machines confuses ACPI and breaks suspend. Fix it. Fixes kernel.org bug #12279: http://bugzilla.kernel.org/show_bug.cgi?id=12279 [ Sorry about the bug (IDE ACPI is not used by default so it managed to slip in). Still it is kind of surprising that the bug breaks suspend as it shouldn't impact anything except IDE ACPI (it seems that it uncovered either some ACPI/PM deficiency or a BIOS bug). ] Reported-and-bisected-by: David Roka <roka@dawid.hu> Tested-by: David Roka <roka@dawid.hu> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Len Brown <len.brown@intel.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* | ACPI: remove private acpica headers from driver filesLin Ming2008-12-311-6/+0
|/ | | | | | | External driver files should not include any private acpica headers. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
* ide: add device flagsBartlomiej Zolnierkiewicz2008-10-131-5/+7
| | | | | | | | | | | | | | Add 'unsigned long dev_flags' to ide_drive_t and convert bitfields to IDE_DFLAG_* flags. While at it: - IDE_DFLAG_ADDRESSING -> IDE_DFLAG_LBA48 - fixup some comments - remove needless g->flags zeroing from ide*_probe() There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: make drive->id an union (take 2)Bartlomiej Zolnierkiewicz2008-10-101-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make drive->id an unnamed union so id can be accessed either by using 'u16 *id' or 'struct hd_driveid *driveid'. Then convert all existing drive->id users accordingly (using 'u16 *id' when possible). This is an intermediate step to make ide 'struct hd_driveid'-free. While at it: - Add missing KERN_CONTs in it821x.c. - Use ATA_ID_WORDS and ATA_ID_*_LEN defines. - Remove unnecessary checks for drive->id. - s/drive_table/table/ in ide_in_drive_list(). - Cleanup ide_config_drive_speed() a bit. - s/drive1/dev1/ & s/drive0/dev0/ in ide_undecoded_slave(). v2: Fix typo in drivers/ide/ppc/pmac.c. (From Stephen Rothwell) There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: remove obsoleted "ide=" kernel parametersBartlomiej Zolnierkiewicz2008-07-151-3/+3
| | | | | | | | | | | | | | | | * Remove obsoleted "ide=" kernel parameters. * Remove no longer needed: - ide_setup() - parse_options() - __setup("", ...) - module_param(options, ...) * Use module_{init,exit}() for MODULE=y case and remove MODULE ifdef. * Make ide_*acpi* and ide_doubler variables static. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: add "noacpi" / "acpigtf" / "acpionboot" parametersBartlomiej Zolnierkiewicz2008-04-271-5/+13
| | | | | | | | | | | | * Rename ide_noacpi{tfs,onboot} to ide_acpi{gtf,onboot} (+ reverse logic). * Move ide_*acpi* variables to ide-acpi.c and remove unnecessary initializers. * Add "noacpi" / "acpigtf" / "acpionboot" parameters. * Obsolete "ide=noacpi" / "ide=acpigtf" / "ide=acpionboot" kernel parameters. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: replace remaining __FUNCTION__ occurrencesHarvey Harrison2008-04-261-6/+6
| | | | | | | | | | __FUNCTION__ is gcc-specific, use __func__ [bart: fix checkpatch.pl errors in ide-lib.c and ppc/mpc8xx.c while at it] Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide-acpi: add missing drive->acpidata zeroingBartlomiej Zolnierkiewicz2008-04-181-0/+2
| | | | | | There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* drivers/ide/ide-acpi.c: fix uninitialized var warningAndrew Morton2008-02-061-1/+1
| | | | | | | | drivers/ide/ide-acpi.c: In function 'ide_acpi_init': drivers/ide/ide-acpi.c:175: warning: 'dev_handle' may be used uninitialized in this function Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: factor out devices setup from ide_acpi_init()Bartlomiej Zolnierkiewicz2008-02-021-29/+20
| | | | | | | | | | | | | | * Factor out devices setup from ide_acpi_init() to ide_acpi_port_init_devices(). * Call ide_acpi_port_init_devices() in ide_device_add_all(). While at it: * Remove no longer needed 'drive' field from struct ide_acpi_drive_link. There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide-acpi: remove dead code from do_drive_get_GTF()Bartlomiej Zolnierkiewicz2008-02-021-10/+0
| | | | | | These pointers are always setup in ide_acpi_init(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide-acpi: remove needless exportsBartlomiej Zolnierkiewicz2008-02-021-4/+0
| | | | Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: delete filenames/versions from commentsBartlomiej Zolnierkiewicz2008-02-011-1/+0
| | | | | | | | | | | | | | | Delete filenames/versions from comments. I'm leaving decisions about adding DRV_VERSION defines and MODULE_VERSION()-s to maintainers of the respective drivers. While at it: * Remove unused VERSION define from ide.c. * Remove unused/stale DRV_VERSION define from au1xxx-ide.c. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: set IDE_TFLAG_IN_* flags before queuing/executing commandBartlomiej Zolnierkiewicz2008-01-261-1/+1
| | | | | | | | | | | | * Add IDE_TFLAG_{HOB,TF,DEVICE} defines. * Set IDE_TFLAG_IN_* flags in {do_rw,ide_no_data,ide_raw}_taskfile() users. * Remove no longer needed ->tf_flags setup from ide_end_drive_cmd(). There should be no functionality changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: remove unnecessary writes to HOB taskfile registersBartlomiej Zolnierkiewicz2008-01-251-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Set taskfile flags for REQ_TYPE_ATA_TASKFILE requests before adding the request to the queue. * Cleanup execute_drive_cmd(). * Remove unnecessary writes to HOB taskfile registers when using LBA48 disk for the following cases: - Power Management requests (WIN_FLUSH_CACHE[_EXT], WIN_STANDBYNOW1, WIN_IDLEIMMEDIATE commands) - special commands (WIN_SPECIFY, WIN_RESTORE, WIN_SETMULT) - Host Protected Area support (WIN_READ_NATIVE_MAX, WIN_SET_MAX) - /proc/ide/ SMART support (WIN_SMART with SMART_ENABLE, SMART_READ_VALUES and SMART_READ_THRESHOLDS subcommands) - write cache enabling/disabling in ide-disk (WIN_SETFEATURES with SETFEATURES_{EN,DIS}_WCACHE) - write cache flushing in ide-disk (WIN_FLUSH_CACHE[_EXT]) - acoustic management in ide-disk (WIN_SETFEATURES with SETFEATURES_{EN,DIS}_AAM) - door (un)locking in ide-disk (WIN_DOORLOCK, WIN_DOORUNLOCK) - /proc/ide/hd?/identify support (WIN_IDENTIFY) - ACPI _GTF taskfiles Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: add ide_no_data_taskfile() helperBartlomiej Zolnierkiewicz2008-01-251-5/+2
| | | | | | | | | | | | | * Add ide_no_data_taskfile() helper and convert ide_raw_taskfile() w/ NO DATA protocol users to use it instead. * Set ->data_phase explicitly in ide_no_data_taskfile() (TASKFILE_NO_DATA is defined as 0x0000). * Unexport task_no_data_intr(). Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: add struct ide_taskfile (take 2)Bartlomiej Zolnierkiewicz2008-01-251-7/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Don't set write-only ide_task_t.hobRegister[6] and ide_task_t.hobRegister[7] in idedisk_set_max_address_ext(). * Add struct ide_taskfile and use it in ide_task_t instead of tfRegister[] and hobRegister[]. * Remove no longer needed IDE_CONTROL_OFFSET_HOB define. * Add #ifndef/#endif __KERNEL__ around definitions of {task,hob}_struct_t. While at it: * Use ATA_LBA define for LBA bit (0x40) as suggested by Tejun Heo. v2: * Add missing newlines. (Noticed by Sergei) * Use ~ATA_LBA instead of 0xBF. (Noticed by Sergei) * Use unnamed unions for error/feature and status/command. (Suggested by Sergei). There should be no functionality changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* IDE: terminate ACPI DMI listJeff Garzik2008-01-111-0/+2
| | | | | | | Fix oops reported by Trond. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ide: workaround suspend bug for ACPI IDEShaohua Li2008-01-101-1/+35
| | | | | | | | | | | | | | | | | | | | | http://bugzilla.kernel.org/show_bug.cgi?id=9673 ACPI _PS3 cause S4 breaks in the second attempt. The system has a _PS3 method for IDE, which will call into SMM mode. Currently we haven't clue why just the second attempt fails, as it's totally in BIOS code, so blacklist the system so far for 2.6.24. A possible suspect is ACPI NVS isn't save/restore, we will revisit the bug after linux does ACPI NVS save/restore. Bart: - fix scripts/checkpatch.pl complaints - const-ify ide_acpi_dmi_table[] Signed-off-by: Shaohua Li <shaohua.li@intel.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Reported-by: Mikko Vinni <mmvinni@yahoo.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: fix ->data_phase in taskfile_load_raw()Bartlomiej Zolnierkiewicz2007-10-201-1/+1
| | | | | | | | It should be TASKFILE_NO_DATA, not TASKFILE_IN. Luckily ATM ->data_phase is unused if ->command_type == IDE_DRIVE_TASK_NO_DATA but this may change in the future. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: unexport ide_acpi_set_stateAdrian Bunk2007-10-131-1/+0
| | | | | | | | | | This patch removes the unused EXPORT_SYMBOL_GPL(ide_acpi_set_state) Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Shaohua Li <shaohua.li@intel.com> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide: hook ACPI _PSx method to IDE power on/offShaohua Li2007-10-111-0/+42
| | | | | | | | | | | | | | | | | | | | | ACPI spec defines the sequence of IDE power on/off: Powering down: Call _GTM. Power down drive (calls _PS3 method and turns off power planes). Powering up: Power up drive (calls _PS0 method if present and turns on power planes). Call _STM passing info from _GTM (possibly modified), with ID data from each drive. Initialize the channel. May modify the results of _GTF. For each drive: Call _GTF. Execute task file (possibly modified). This patch adds the missed _PS0/_PS3 methods call. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Acked-by: Len Brown <len.brown@intel.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ide-acpi support warning fixAndrew Morton2007-02-071-3/+4
| | | | | | | | | drivers/ide/ide-acpi.c: In function 'ide_acpi_get_timing': drivers/ide/ide-acpi.c:537: warning: format '%x' expects type 'unsigned int', but argument 4 has type 'long unsigned int' Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
* ACPI support for IDE devicesHannes Reinecke2007-02-071-0/+696
This patch implements ACPI integration for generic IDE devices. The ACPI spec mandates that some methods are called during suspend and resume. And consequently there most modern Laptops cannot resume properly without it. According to the spec, we should call '_GTM' (Get Timing) upon suspend to store the current IDE adapter settings. Upon resume we should call '_STM' (Set Timing) to initialize the adapter with the stored settings; afterwards '_GTF' (Get Taskfile) should be called which returns a buffer with some IDE initialisation commands. Those commands should be passed to the drive. There are two module params which control the behaviour of this patch: 'ide=noacpi' Do not call any ACPI methods (Disables any ACPI method calls) 'ide=acpigtf' Enable execution of _GTF methods upon resume. Has no effect if 'ide=noacpi' is set. 'ide=acpionboot' Enable execution of ACPI methods during boot. This might be required on some machines if 'ide=acpigtf' is selected as some machines modify the _GTF information depending on the drive identification passed down with _STM. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
OpenPOWER on IntegriCloud