summaryrefslogtreecommitdiffstats
path: root/drivers/i2c/busses/i2c-viapro.c
Commit message (Collapse)AuthorAgeFilesLines
* i2c-viapro: Add support for the VT8237SJean Delvare2008-01-271-1/+5
| | | | | | | Add support for another variant of the VT8237. I couldn't test I2C block support but I assume it is present as well. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c: Let the user specify PCI driver data through new_idJean Delvare2008-01-271-0/+5
| | | | | | | | | | | The i2c-amd756 and i2c-viapro drivers make use of the driver_data field of the PCI device ID. When adding device IDs dynamically (by writing to the new_id sysfs file) you cannot set the value of this field by default. It has to be allowed explicitly. Do that, and check the value so that the user can't crash the kernel accidentally. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
* Convert files to UTF-8 and some cleanupsJan Engelhardt2007-10-191-1/+1
| | | | | | | | | | | | | | | | | | * Convert files to UTF-8. * Also correct some people's names (one example is Eißfeldt, which was found in a source file. Given that the author used an ß at all in a source file indicates that the real name has in fact a 'ß' and not an 'ss', which is commonly used as a substitute for 'ß' when limited to 7bit.) * Correct town names (Goettingen -> Göttingen) * Update Eberhard Mönkeberg's address (http://lkml.org/lkml/2007/1/8/313) Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Adrian Bunk <bunk@kernel.org>
* Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds2007-07-121-2/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (34 commits) PCI: Only build PCI syscalls on architectures that want them PCI: limit pci_get_bus_and_slot to domain 0 PCI: hotplug: acpiphp: avoid acpiphp "cannot get bridge info" PCI hotplug failure PCI: hotplug: acpiphp: remove hot plug parameter write to PCI host bridge PCI: hotplug: acpiphp: fix slot poweroff problem on systems without _PS3 PCI: hotplug: pciehp: wait for 1 second after power off slot PCI: pci_set_power_state(): check for PM capabilities earlier PCI: cpci_hotplug: Convert to use the kthread API PCI: add pci_try_set_mwi PCI: pcie: remove SPIN_LOCK_UNLOCKED PCI: ROUND_UP macro cleanup in drivers/pci PCI: remove pci_dac_dma_... APIs PCI: pci-x-pci-express-read-control-interfaces cleanups PCI: Fix typo in include/linux/pci.h PCI: pci_ids, remove double or more empty lines PCI: pci_ids, add atheros and 3com_2 vendors PCI: pci_ids, reorder some entries PCI: i386: traps, change VENDOR to DEVICE PCI: ATM: lanai, change VENDOR to DEVICE PCI: Change all drivers to use pci_device->revision ...
| * PCI: Change all drivers to use pci_device->revisionAuke Kok2007-07-111-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of all drivers reading pci config space to get the revision ID, they can now use the pci_device->revision member. This exposes some issues where drivers where reading a word or a dword for the revision number, and adding useless error-handling around the read. Some drivers even just read it for no purpose of all. In devices where the revision ID is being copied over and used in what appears to be the equivalent of hotpath, I have left the copy code and the cached copy as not to influence the driver's performance. Compile tested with make all{yes,mod}config on x86_64 and i386. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Acked-by: Dave Jones <davej@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | i2c: Fix the i2c_smbus_read_i2c_block_data() prototypeJean Delvare2007-07-121-1/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | Let the drivers specify how many bytes they want to read with i2c_smbus_read_i2c_block_data(). So far, the block count was hard-coded to I2C_SMBUS_BLOCK_MAX (32), which did not make much sense. Many driver authors complained about this before, and I believe it's about time to fix it. Right now, authors have to do technically stupid things, such as individual byte reads or full-fledged I2C messaging, to work around the problem. We do not want to encourage that. I even found that some bus drivers (e.g. i2c-amd8111) already implemented I2C block read the "right" way, that is, they didn't follow the old, broken standard. The fact that it was never noticed before just shows how little i2c_smbus_read_i2c_block_data() was used, which isn't that surprising given how broken its prototype was so far. There are some obvious compatiblity considerations: * This changes the i2c_smbus_read_i2c_block_data() prototype. Users outside the kernel tree will notice at compilation time, and will have to update their code. * User-space has access to i2c_smbus_xfer() directly using i2c-dev, so the changed expectations would affect tools such as i2cdump. In order to preserve binary compatibility, we give I2C_SMBUS_I2C_BLOCK_DATA a new numeric value, and define I2C_SMBUS_I2C_BLOCK_BROKEN with the old numeric value. When i2c-dev receives a transaction with the old value, it can convert it to the new format on the fly. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c: Shrink struct i2c_clientDavid Brownell2007-05-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | This shrinks the size of "struct i2c_client" by 40 bytes: - Substantially shrinks the string used to identify the chip type - The "flags" don't need to be so big - Removes some internal padding It also adds kerneldoc for that struct, explaining how "name" is really a chip type identifier; it's otherwise potentially confusing. Because the I2C_NAME_SIZE symbol was abused for both i2c_client.name and for i2c_adapter.name, this needed to affect i2c_adapter too. The adapters which used that symbol now use the more-obviously-correct idiom of taking the size of that field. JD: Shorten i2c_adapter.name from 50 to 48 bytes while we're here, to avoid wasting space in padding. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c-viapro: Add support for the VIA CX700 south bridgeJean Delvare2007-02-131-1/+5
| | | | | | | We do not have any documentation for the CX700, but it was reported to work fine. Thanks to Claas Langbehn for testing. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c: Add IDs to adaptersStephen Hemminger2007-02-131-0/+1
| | | | | | | | | IDs have been defined but not used by most of the I2C adapters. By having a unique ID, clients can check for correct connection during probe. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c: Constify i2c_algorithm declarations, part 2Jean Delvare2006-09-261-1/+1
| | | | | | | | | | | | i2c: Constify i2c_algorithm declarations, part 2 Make struct i2c_algorithm declarations const in all i2c bus drivers where it is possible. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* i2c-viapro: Add support for the VT8237A and VT8251Rudolf Marek2006-09-261-0/+8
| | | | | | | | | | | i2c-viapro: Add support for the VT8237A and VT8251 Documentation update included. Compile tested. Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] PCI: removed unneeded .owner field from struct pci_driverGreg Kroah-Hartman2005-11-101-1/+0
| | | | Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] i2c-viapro: Some adjustmentsJean Delvare2005-11-071-13/+14
| | | | | | | | | | | | | | | | | | | The big i2c-viapro SMBus driver update which went into 2.6.14-git1 introduced a few minor issues. Nothing critical, but I would like a few adjustments to be merged in to fix the following problems: * VIA should not be spelled Via. * Frodo Looijaard and Philip Edelbrock did not write the i2c-viapro driver. * When debugging is disabled, half of messages would be logged. * Drop an unneeded masking. * Some port reads can be avoided now that the transaction size is passed as a parameter to vt596_transaction(). * SMBus Receive Byte transactions are used for probing too (for EEPROMs), so hide errors on these too. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] Owner field additions to many i2c drivers, 1 of 5Laurent Riffard2005-10-281-0/+1
| | | | | | | | This patch updates .owner field for various struct pci_driver variables. Signed-off-by: Laurent Riffard <laurent.riffard@free.fr> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] i2c-viapro: Cleanup ifdef usageGreg KH2005-10-281-4/+2
| | | | | | | | | | It's not nice to put #ifdef in the middle of functions. CC: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/i2c/busses/i2c-viapro.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)
* [PATCH] i2c-viapro: Improve register dumpJean Delvare2005-10-281-8/+30
| | | | | | | | | | | | Improve the register dump used to debug the i2c-viapro driver. The original dump was missing the HSTSTS register and the block data buffer. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/i2c/busses/i2c-viapro.c | 38 ++++++++++++++++++++++++++++++-------- 1 file changed, 30 insertions(+), 8 deletions(-)
* [PATCH] i2c-viapro: Refactor control outbJean Delvare2005-10-281-4/+3
| | | | | | | | | | | By slightly shifting the interface between vt596_access and vt596_transaction, we can save two I/O accesses per SMBus transaction. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/i2c/busses/i2c-viapro.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)
* [PATCH] i2c-viapro: Update supported devices listJean Delvare2005-10-281-9/+13
| | | | | | | | | | | | Make it clearer which chips are supported by the i2c-viapro driver, and which support I2C block transactions. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Documentation/i2c/busses/i2c-viapro | 12 ++++++------ drivers/i2c/busses/i2c-viapro.c | 22 +++++++++++++--------- 2 files changed, 19 insertions(+), 15 deletions(-)
* [PATCH] i2c-viapro: Code cleanupsJean Delvare2005-10-281-81/+41
| | | | | | | | | | | | | | | | | | | | | | | | | Cleanups to the i2c-viapro driver: * Kill unused defines. * Kill interrupt-related code, as the driver doesn't use interrupts. * Fix broken comments (some copied from i2c-piix4.) * Centralize the unsupported command error case in vt596_access. That way we'll catch all unsupported commands, not only I2C_SMBUS_PROC_CALL. * Refactor some code. * Convert some dev_dbg into dev_err. Errors better be reported even in non-debug mode. * Do not verify that the final reset succeeded. It'll be checked at the beginning of the next transaction anyway. * Use the driver name to reserve the I/O region. * Do not print the contents of the SMBREV register, it reads 0 on all chips I've seen so far. * Some other minor fixes all over the place. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/i2c/busses/i2c-viapro.c | 122 +++++++++++++--------------------------- 1 file changed, 41 insertions(+), 81 deletions(-)
* [PATCH] i2c-viapro: Implement I2C Block transactionsJean Delvare2005-10-281-3/+36
| | | | | | | | | | | | | | | | Implement the I2C block transactions on VIA chips which support them: VT82C686B, VT8233, VT8233A, VT8235 and VT8237R. This speeds up EEPROM accesses by a factor 10 or so. I would like to thank Antonino A. Daplas, Hinko Kocevar, Salah Coronya and Andreas Henriksson for their help in testing this new feature. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Documentation/i2c/busses/i2c-viapro | 7 +++++- drivers/i2c/busses/i2c-viapro.c | 39 +++++++++++++++++++++++++++++++++--- 2 files changed, 42 insertions(+), 4 deletions(-)
* [PATCH] i2c-viapro: Coding style fixesJean Delvare2005-10-281-38/+38
| | | | | | | | | | | | | Before I go on cleaning up and improving the i2c-viapro driver, let's fix all the coding style issues: mostly trailing white space, and spaces used where tabs should be. Signed-off-by: Jean Delvare <khali@linux-fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Documentation/i2c/busses/i2c-viapro | 12 ++--- drivers/i2c/busses/i2c-viapro.c | 76 ++++++++++++++++++------------------ 2 files changed, 43 insertions(+), 45 deletions(-)
* [PATCH] I2C: Kill i2c_algorithm.id (4/7)Jean Delvare2005-09-051-1/+0
| | | | | | | | There are no more users of i2c_algorithm.id, so we can finally drop this structure member. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] I2C: Kill i2c_algorithm.name (1/7)Jean Delvare2005-09-051-1/+0
| | | | | | | | | The name member of the i2c_algorithm is never used, although all drivers conscientiously fill it. We can drop it completely, this structure doesn't need to have a name. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] I2C: drivers/i2c/*: #include <linux/config.h> cleanupAlexey Dobriyan2005-06-211-1/+0
| | | | | | | | | | Files that don't use CONFIG_* stuff shouldn't include config.h Files that use CONFIG_* stuff should include config.h It's that simple. ;-) Signed-off-by: Alexey Dobriyan <adobriyan@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds2005-04-161-0/+458
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
OpenPOWER on IntegriCloud