summaryrefslogtreecommitdiffstats
path: root/drivers/hwmon
Commit message (Collapse)AuthorAgeFilesLines
* hwmon/w83627ehf: Don't redefine REGION_OFFSETJean Delvare2007-04-241-7/+7
| | | | | | | | | | On ia64, kernel headers define REGION_OFFSET so we can't use that. Reported by Andrew Morton. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: David Hubbard <david.c.hubbard@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* hwmon/w83627ehf: Fix the fan5 clock divider writeJean Delvare2007-04-171-3/+3
| | | | | | | | | | | | | | | | | | | | | | Users have been complaining about the w83627ehf driver flooding their logs with debug messages like: w83627ehf 9191-0a10: Increasing fan 4 clock divider from 64 to 128 or: w83627ehf 9191-0290: Increasing fan 4 clock divider from 4 to 8 The reason is that we failed to actually write the LSB of the encoded clock divider value for that fan, causing the next read to report the same old value again and again. Additionally, the fan number was improperly reported, making the bug harder to find. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] hwmon: Build fix for SENSORS_W83793Stefano Brivio2007-03-161-0/+1
| | | | | | | | | We need vid_which_vrm and vid_from_reg in the w83793 module. Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* hwmon/vt1211: Add probing of alternate config index portJuerg Haefliger2007-02-141-28/+30
| | | | | | | | | | The configuration index port of the vt1211 can be accessed at two different addresses 0x2e or 0x4e, depending on pin strappings. This patch adds support to scan both addresses during module initialization. Signed-off-by: Juerg Haefliger <juergh@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon/f71805f: Fix a race conditionJean Delvare2007-02-141-7/+1
| | | | | | | | | | | | I think I introduced a potential race condition bug with commit 51c997d80e1f625aea3426a8a9087f5830ac6db3. I didn't realize it back then, but platform_device_put and platform_device_release both appear to free the platform data associated with the device. This makes an explicit kfree redundant at best, and maybe even racy, as it might occur while someone still holds a reference to the platform device. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon/abituguru: Fix unchecked return statusHans de Goede2007-02-141-9/+21
| | | | | | | | | Fix an unused return value warning for the abituguru driver. Also make sure the sysfs files are created before we register with the hwmon class, and delete the sysfs files on driver removal. Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: New driver for the Analog Devices ADM1029Corentin Labbe2007-02-143-0/+520
| | | | | Signed-off-by: Corentin Labbe <corentin.labbe@geomatys.fr> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon/w83627ehf: Add support for the W83627DHG chipDavid Hubbard2007-02-141-11/+43
| | | | | Signed-off-by: David Hubbard <david.c.hubbard@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: Use subsys_initcallDavid Brownell2007-02-141-1/+1
| | | | | | | | | | | | | Subsystem infrastructure should normally register with "subsys_initcall", so that it's available to drivers that may need to initialize early. This patch updates "hwmon" to do so. It's common for embedded systems to have multifunction chips with hardware monitoring interfaces, and to have those chips be used during system bringup ... before a normal "module_init" would kick, or maybe just linked so they'd init before hwmon. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon/lm70: Make lm70_remove a __devexit functionRalf Baechle2007-02-141-1/+1
| | | | | | | This fixes a potential broken reference. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: Cleanup a bogus legacy commentJean Delvare2007-02-147-31/+14
| | | | | | | Cleanup a bogus legacy comment that has been replicated to many hardware monitoring drivers. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: Simplify the locking model of two driversJean Delvare2007-02-142-33/+11
| | | | | | | | | | | | | | | | Many hardware monitoring drivers use two different mutexes, one to protect their per-device data structure, and one to protect the access to the device registers. These mutexes are essentially redundant, as the drivers are transfering values between the device registers and the data cache, so they almost always end up holding both mutexes at the same time. Using a single mutex will make the code more simple and faster. I am changing only two of the affected drivers here, the authors of the other affected drivers are welcome to submit similar patches if they want. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: Drop unused mutexes in two driversJean Delvare2007-02-142-2/+0
| | | | Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon/it87: Add PWM base frequency controlJean Delvare2007-02-141-2/+54
| | | | | | | | | | | Let the user select the base PWM frequency when using the it87 hardware monitoring driver. Different frequencies can give better control on some fans. Also update the documentation to mention the PWM frequency control files, with misc cleanups to the PWM section. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c/vt8231: Remove superfluous initializationDavid Brownell2007-02-131-1/+0
| | | | | | | | Remove a superfluous initialization from the vt8231 hwmon driver; the i2c core does this, and the source field will be vanishing soon. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* [PATCH] hwmon: ansifyAl Viro2007-02-091-1/+1
| | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* hwmon/w83793: Hide invalid VID readingsGong Jun2007-01-181-3/+30
| | | | | | | | | Ignore the VID readings when the motherboard has not designed the function. Signed-off-by: Gong Jun <jgong@winbond.com> Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon/w83793: Fix the fan input detectionRudolf Marek2007-01-181-0/+14
| | | | | | | | | Catch the cases when alternative pins are used to route the fan9-12 input. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Gong Jun <jgong@winbond.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon/w83793: Ignore disabled temperature channelsGong Jun2007-01-181-9/+54
| | | | | | | | | Ignore the temperature readings when its channel is disabled, ignore AMDSI readings. Signed-off-by: Gong Jun <jgong@winbond.com> Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: Fix the VRD 11 decodingJean Delvare2007-01-181-1/+1
| | | | | | I wonder how we came up with such a broken test in the first place. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon/w83793: Remove the description of AMDSI and update the voltage formulaGong Jun2007-01-181-5/+12
| | | | | | | | | | Fix the driver to match the information in datasheet 1.0. AMD SI interface is marked as reserved, computing formula for 5VDD and 5VSB is updated. Signed-off-by: Gong Jun <jgong@winbond.com> Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: New AMS hardware monitoring driverStelian Pop2006-12-128-0/+1037
| | | | | | | | | | | | | | | | This driver adds support for the Apple Motion Sensor (AMS) as found in 2005 revisions of Apple PowerBooks and iBooks. It implements both the PMU and I2C variants. The I2C driver and mouse emulation is based on code by Stelian Pop, while the PMU driver has been developped by Michael Hanselmann. HD parking support will be added later. Various people contributed fixes to this driver, including Aristeu Sergio Rozanski Filho and Jean Delvare. Signed-off-by: Stelian Pop <stelian@popies.net> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Robert Love <rml@novell.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: New Winbond W83793 hardware monitoring driverRudolf Marek2006-12-123-0/+1620
| | | | | | | | Add support for the W83793 hardware monitoring chip. This driver was originally contributed by Yuan Mu of Winbond Electronics Corp. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: Update Rudolf Marek's e-mail addressJean Delvare2006-12-124-6/+6
| | | | | | | The Silicon Hill club is not what it used to be. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon/f71805f: Fix the device address decodingJean Delvare2006-12-121-3/+4
| | | | | | | The lowest 3 bits are ignored, and the chip decodes all 8 addresses, not only the 2 it needs. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon/f71805f: Always create all fan inputsJean Delvare2006-12-121-51/+23
| | | | | | | Fans can be hotplugged, so we should create sysfs file even for fans which are disabled at driver load time. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon/f71805f: Add support for the Fintek F71872F/FG chipJean Delvare2006-12-122-45/+190
| | | | | | | | | | | | | | | | | Add support for the Fintek F71872F/FG Super-I/O chip. It is basically the same as the Fintek F71805F/FG as far as hardware monitoring is concerned, with two additional internal voltages monitored (VSB and battery), and 6 VID inputs (not yet supported.) To make things a bit more confusing, two of the voltage input pins (in4 and in8) can be used for other functions. The driver reads the pin configuration from the Super-I/O configuration space to decide whether it must create interface files for these inputs or not. Many thanks to Nikolay Derkach for testing the early iterations of this code and reporting bugs. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: New PC87427 hardware monitoring driverJean Delvare2006-12-123-0/+641
| | | | | | | | | | | This is a new hardware monitoring driver for the National Semiconductor PC87427 Super-I/O chip. It only supports fan speed monitoring for now, while the chip can do much more. Thanks to Amir Habibi at Candelis for setting up a test system, and to Michael Kress for testing several iterations of this driver. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon/it87: Remove the SMBus interface supportJean Delvare2006-12-121-151/+51
| | | | | | | | | | | This interface was useless as the LPC ISA-like interface is always available, is faster, and is more reliable. This cuts the driver size by some 20%. This change is also required to later convert the it87 driver to a platform driver, so that we can get rid of i2c-isa in a near future. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon/hdaps: Update the list of supported devicesStephan Berberig2006-12-122-3/+6
| | | | | | | | | | Remove the strange DMI for the R52 (1846AQG) and add a note to update to latest BIOS in the Kconfig and source code. Signed-off-by: Stephan Berberig <s.berberig@arcor.de> Signed-off-by: Robert Love <rlove@rlove.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon/hdaps: Move the DMI detection data to .dataJean Delvare2006-12-121-39/+29
| | | | | | | | | | | Move the DMI detection data from .text to .data. We really don't want that amount of data on the stack. Also refactor the macros used to generate the detection data, the vendor becomes a parameter. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Robert Love <rlove@rlove.org>
* hwmon/pc87360: Autodetect the VRM versionJim Cromie2006-12-121-1/+1
| | | | | | | | pc87360 currently hardcodes vrm = 90 (2.4 vintage). Update it to use newer code in hwmon-vid which reads cpuid to determine the correct vid. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon/f71805f: Add support for "speed mode" fan speed controlJean Delvare2006-12-121-1/+49
| | | | | | | | In "speed mode", the user specifies a target fan speed (in RPM) and the chip automatically adjusts the PWM duty cycle (or DC output level) to reach this target. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon/f71805f: Support DC fan speed control modeJean Delvare2006-12-121-3/+43
| | | | | | In DC mode, the pwmN_freq files are not created. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon/f71805f: Let the user adjust the PWM base frequencyJean Delvare2006-12-121-1/+62
| | | | | | | Different frequencies can give better results depending on the exact fan model used. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon/f71805f: Add manual fan speed controlJean Delvare2006-12-121-1/+144
| | | | | | | | pwmN files are writable only in manual fan speed control mode. In automatic fan speed control modes, they are read-only and report the duty cycle chosen by the chip. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon/f71805f: Store the fan control registersJean Delvare2006-12-121-11/+15
| | | | | | | | So far we were only extracting the fan skip bit from the fan control registers, but we'll soon need more bits so better store the whole register values. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* [PATCH] severing fs.h, radix-tree.h -> sched.hAl Viro2006-12-041-0/+1
| | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* [PATCH] severing module.h->sched.hAl Viro2006-12-041-0/+1
| | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* hwmon: Fix debug messages in w83781dJean Delvare2006-10-181-8/+10
| | | | | | | | | | Fix debug messages in w83781d at detection time. We can't use dev_dbg() on an i2c client's device before calling i2c_attach_client() on that client. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* hwmon: Let w83781d and lm78 load againJean Delvare2006-10-182-12/+12
| | | | | | | | | | | | | Let the w83781d and lm78 hardware monitoring drivers load even when no chip was detected at the ISA address. There can still be supported chips connected to an I2C bus or SMBus. This fixes bug #7293. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* w83627ehf: Fix the detection of fan5Rudolf Marek2006-10-181-2/+9
| | | | | | | | | | Fix the detection of fan5 and preserve the bit between the register writes, because the bit is write only. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* k8temp: Documentation updateRudolf Marek2006-10-181-2/+4
| | | | | | | | | Update the documentation for the k8temp driver. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* smsc47m1: List the SMSC LPC47M112 as supportedJean Delvare2006-10-182-7/+8
| | | | | | | | | | | The SMSC LPC47M112 Super-I/O chip appears to be compatible with the LPC47M10x and LPC47M13x as far as hardware monitoring is concerned. The device ID is even the same, so it's really only a documentation update. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* adm9240: Update Grant Coady's email addressGrant Coady2006-10-181-2/+2
| | | | | | | | | Replace a bouncing email that I cannot recover from Mr Google. Signed-off-by: Grant Coady <gcoady.lk@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* w83791d: Fix unchecked return statusJim Cromie2006-10-181-29/+56
| | | | | | | | | | | | Replace all unchecked calls to device_create_file with a single group declaration, and one call to sysfs_create_group, and check that one return status. Also remove the files on device detach. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off by: Charles Spirakis <bezaur@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Remove all inclusions of <linux/config.h>Dave Jones2006-10-041-1/+0
| | | | | | kbuild explicitly includes this at build time. Signed-off-by: Dave Jones <davej@redhat.com>
* [PATCH] hdaps: support Lenovo ThinkPad T60Soos Peter2006-10-011-0/+1
| | | | | | | | | | | | Support hdaps on Lenovo ThinkPad T60. It was tested with pivot utility from http://www.kernel.org/pub/linux/kernel/people/rml/hdaps and it seems to be OK. Cc: Jean Delvare <khali@linux-fr.org> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Robert Love <rml@novell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* hwmon: Remove Yuan Mu's addressJean Delvare2006-09-281-1/+1
| | | | | | | | | | | | | hwmon: Remove Yuan Mu's address Yuan Mu no longer works at Winbond. I wish to publicly thank Yuan for his help with Winbond hardware monitoring chips support during the past 10 months. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* hwmon: Fix unchecked return status, SMSC chipsJean Delvare2006-09-282-83/+145
| | | | | | | | | | | hwmon: Fix unchecked return status, SMSC chips Fix up 2 more hwmon drivers so that they no longer ignore return status from device_create_file(). Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
OpenPOWER on IntegriCloud