summaryrefslogtreecommitdiffstats
path: root/drivers/hwmon
Commit message (Collapse)AuthorAgeFilesLines
* hwmon: (smsc47m1) restore missing name attributeJean Delvare2007-08-121-0/+2
| | | | | | | | | | | | | | | The smsc47m1 driver no longer creates the name attribute used by libsensors to identify chip types. It was lost during the conversion to a platform driver. I was fooled by the fact that we do have a group with all attributes, but only to delete them all at once. The group is not used to create the attributes, so we have to explicitly create the name attribute. This fixes lm-sensors ticket #2236: http://lm-sensors.org/ticket/2236 Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: (w83627ehf) don't assume bank 0Jean Delvare2007-08-121-5/+3
| | | | | | | | | | | Don't assume that the default bank is 0. For one thing, we don't even set it to 0 when the driver is loaded, so the initial state might be different. For another, something (say, the BIOS) might access the chip and leave with the bank set to something different, so assuming that the bank value is 0 is not safe. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: (w83627ehf) read fan_div values during probeMark M. Hoffman2007-08-121-19/+29
| | | | | | | | This patch forces the driver to read the fan divider values during early init. Otherwise, a call to store_fan_min() could access uninitialized variables. Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: fix w83781d temp sensor type settingMark M. Hoffman2007-08-111-2/+2
| | | | | | | | Commit 348753379a7704087603dad403603e825422fd9a introduced a regression that caused temp2 and temp3 sensor type settings to be written to temp1 instead. The result is that temp sensor readings could be way off. Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: fscher read control bugfixHans de Goede2007-07-301-0/+2
| | | | | | | | | | | | Here is a small fscher bugfix for 2.6.23 merging, lifted from my other fscher work, as requested by Jean. The current driver has a control sysfs attribute, which shows the contents of the control register, but the underlying global_control value in the data structure currently never gets filled with the actual contents of this register. Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: make abituguru3_read_increment_offset() staticAdrian Bunk2007-07-301-2/+3
| | | | | | | | abituguru3_read_increment_offset() can become static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: Fix regression caused by typo in lm90.cGuillaume Chazarain2007-07-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The commit http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=32c82a934759b2c9939c9e25865c2d7d1204b9e8 broke lm90 for my (Asus V6VA) laptop. Before 2.6.23-rc1 and with the following patch, I get: [g ~]$ sensors max6657-i2c-0-4c Adapter: SMBus I801 adapter at 0400 M/B Temp: +64°C (low = +0°C, high = +127°C) CPU Temp: +78.9°C (low = +73.2°C, high = +88.2°C) M/B Crit: +105°C (hyst = +95°C) CPU Crit: +105°C (hyst = +95°C) Which regressed into: [g ~]$ sensors No sensors found! Make sure you loaded all the kernel drivers you need. Try sensors-detect to find out which these are. zsh: 2701 exit 1 sensors and dmesg contains: i2c-adapter i2c-0: Unsupported chip (man_id=0x4D, chip_id=0x4D). It seems to be a typo, as address 0X4F is mentionned nowhere else in the file, and my chip is actually at 0x4C. Signed-off-by: Guillaume Chazarain <guichaz@yahoo.fr> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: (applesmc) add temperature sensors set for MacbookMartin Szulecki2007-07-301-5/+9
| | | | | | | | | Signed-off-by: Nicolas Boichat <nicolas@boichat.ch> Acked-by: Jean Delvare <khali@linux-fr.org> Cc: Martin Szulecki <mactel@sukimashita.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: fscher control update bugfixHans de Goede2007-07-301-1/+1
| | | | | | | | | | | Here is another small fscher bugfix for 2.6.23 merging, this was caught by Jean while reviewing my other bugfix. The driver was updating its copy of the control register as if it was clear to write, but its regular read/write. This patch fixes this. Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: fix dme1737 temp fault attributeJuerg Haefliger2007-07-301-1/+1
| | | | | | | | | | | Fix temp?_fault attribute. The temp was incorrectly compared against 0x0800 rather than 0x8000. Only the upper 8 bits are compared as the datasheet doesn't specify what happens to the lower bits in case of a diode fault. Signed-off-by: Juerg Haefliger <juergh at gmail.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: Add missing __devexit tags in various driversJean Delvare2007-07-307-8/+8
| | | | | | | | | | | | | | On Sun, 22 Jul 2007 00:30:56 +0200, Gabriel C wrote: > I noticed this warnings on current git: > > drivers/hwmon/pc87360.c:1082: warning: 'pc87360_remove' defined but not used > drivers/hwmon/sis5595.c:580: warning: 'sis5595_remove' defined but not used > drivers/hwmon/smsc47m1.c:608: warning: 'smsc47m1_remove' defined but not used > drivers/hwmon/via686a.c:648: warning: 'via686a_remove' defined but not used > drivers/hwmon/vt8231.c:755: warning: 'vt8231_remove' defined but not used Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: clean up duplicate includesJesper Juhl2007-07-301-1/+0
| | | | | | | | This patch cleans up duplicate includes in drivers/hwmon/ Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: fix lm78 detection regressionHans de Goede2007-07-301-1/+1
| | | | | | | | | | | | | | | Here is a small but important bugfix to the lm78 driver. I found out about this problem because a Fedora user filed a bug that the lm78 driver no longer worked on his system: https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=249428 The problem is that sometime ago the isa lm78 detection was made more stringent and this new code now checks the chip-id, but does not accept a chip-id of 20h, however a chip-id of 20h is valid, and is excepted in the main probe function of the driver, see line 551. This fixed also makes the isa detection code accept the chip-id of 0x20 fixing this issue. Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: fix array overruns in lm93.cHans-Jürgen Koch2007-07-301-1/+1
| | | | | | | | | This fixes an array overflow bug. We have 4 pairs of min/max temperature limits, not 3. Signed-off-by: Hans J. Koch <hjk@linutronix.de> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: add support for THMC50 and ADM1022Krzysztof Helt2007-07-303-0/+451
| | | | | | | | This patch adds support for THMC50 and ADM1022 hardware monitoring chips. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* Merge branch 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6Linus Torvalds2007-07-1923-1408/+7953
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6: (44 commits) i2c: Delete the i2c-isa pseudo bus driver hwmon: refuse to load abituguru driver on non-Abit boards hwmon: fix Abit Uguru3 driver detection on some motherboards hwmon/w83627ehf: Be quiet when no chip is found hwmon/w83627ehf: No need to initialize fan_min hwmon/w83627ehf: Export the thermal sensor types hwmon/w83627ehf: Enable VBAT monitoring hwmon/w83627ehf: Add support for the VID inputs hwmon/w83627ehf: Fix timing issues hwmon/w83627ehf: Add error messages for two error cases hwmon/w83627ehf: Convert to a platform driver hwmon/w83627ehf: Update the Kconfig entry make coretemp_device_remove() static hwmon: Add LM93 support hwmon: Improve the pwmN_enable documentation hwmon/smsc47b397: Don't report missing fans as spinning at 82 RPM hwmon: Add support for newer uGuru's hwmon/f71805f: Add temperature-tracking fan control mode hwmon/w83627ehf: Preserve speed reading when changing fan min hwmon: fix detection of abituguru volt inputs ... Manual fixup of trivial conflict in MAINTAINERS file
| * hwmon: refuse to load abituguru driver on non-Abit boardsHans de Goede2007-07-191-0/+10
| | | | | | | | | | | | | | | | | | With this patch the abituguru refuses to load on non Abit motherboards, as discussed in lkml CONFIG_BREAK_MY_MACHINE thread. Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
| * hwmon: fix Abit Uguru3 driver detection on some motherboardsHans de Goede2007-07-191-5/+6
| | | | | | | | | | | | | | | | | | | | | | | | This patch changes the driver to also detect uguru3's which hold 0x08 at DATA initially, as has been reported here: https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=220160 Also when an uguru3's holds 0x0014 in the ID register it will now report "Abit AB9 Pro" as motherboard identification. Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
| * hwmon/w83627ehf: Be quiet when no chip is foundJean Delvare2007-07-191-2/+3
| | | | | | | | | | | | | | | | This fixes bug #8593: http://bugzilla.kernel.org/show_bug.cgi?id=8593 Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
| * hwmon/w83627ehf: No need to initialize fan_minJean Delvare2007-07-191-5/+0
| | | | | | | | | | | | | | | | We don't need to initialize fan_min in this driver, as the fan_div attributes are read-only. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
| * hwmon/w83627ehf: Export the thermal sensor typesJean Delvare2007-07-191-1/+23
| | | | | | | | | | | | | | | | | | Add support for the w83627ehf thermal sensor types. I made them read-only, as the BIOS is supposed to set them up properly. This information makes it easier to find out which temperature channel corresponds to the CPU. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
| * hwmon/w83627ehf: Enable VBAT monitoringJean Delvare2007-07-191-0/+5
| | | | | | | | | | | | | | | | | | If VBAT monitoring is disabled, enable it. Original patch from an anonymous contributor on the lm-sensors trac system: http://lm-sensors.org/ticket/2218 Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
| * hwmon/w83627ehf: Add support for the VID inputsJean Delvare2007-07-192-2/+49
| | | | | | | | | | | | | | | | | | The W83627EHF and similar chips have 6 VID input pins, add support for them. The driver changes the input voltage level automatically if the current setting is not correct for the detected CPU model. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
| * hwmon/w83627ehf: Fix timing issuesJean Delvare2007-07-191-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | * I have experimental evidence that the W83627EHG needs more than 1 second to refresh all the measured values. Increase the caching time to 1.5 second. * When changing a fan clock divider, the corresponding fan speed measurement register is no longer valid, until the next time the chip will refresh it. One way to fix this is to pretend that the cache is still valid for one more period (1.5 second.) Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
| * hwmon/w83627ehf: Add error messages for two error casesDavid Hubbard2007-07-191-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | If the Super-I/O device is disabled, it is likely the BIOS has a good reason for leaving it disabled, so give a warning when enabling it -- it's not likely to be wired correctly or be able to give good data. Also, if the Super-I/O device is configured with an address of 0, the driver refuses to initialize it. Signed-off-by: David Hubbard <david.c.hubbard@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
| * hwmon/w83627ehf: Convert to a platform driverDavid Hubbard2007-07-192-224/+286
| | | | | | | | | | | | | | | | | | Remove i2c-isa from the w83627ehf driver, and use a platform driver instead. Signed-off-by: David Hubbard <david.c.hubbard@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
| * hwmon/w83627ehf: Update the Kconfig entryDavid Hubbard2007-07-191-5/+5
| | | | | | | | | | | | | | | | Add description for the W83627DHG chip to Kconfig. Signed-off-by: David Hubbard <david.c.hubbard@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
| * make coretemp_device_remove() staticAdrian Bunk2007-07-191-1/+1
| | | | | | | | | | | | | | | | coretemp_device_remove() can become static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
| * hwmon: Add LM93 supportHans-Jürgen Koch2007-07-193-0/+2667
| | | | | | | | | | | | | | This patch adds support for the LM93 hardware monitoring chip. Signed-off-by: Hans J. Koch <hjk@linutronix.de> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
| * hwmon/smsc47b397: Don't report missing fans as spinning at 82 RPMJean Delvare2007-07-191-0/+2
| | | | | | | | | | | | | | Also protects ourselves against a possible division by zero. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
| * hwmon: Add support for newer uGuru'sHans de Goede2007-07-194-8/+1165
| | | | | | | | | | | | | | | | | | | | | | This patch adds a new driver for the hardware monitoring features of the third revision of the Abit uGuru chip, found on recent Abit motherboards. This is an entirely different beast then the first and second revision (its again a winbond microcontroller, but the "protocol" to talk to it and the bank addresses are very different. Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
| * hwmon/f71805f: Add temperature-tracking fan control modePhil Endecott2007-07-191-1/+166
| | | | | | | | | | | | | | | | | | | | Add support for the "temperature mode" fan speed control. In this mode, the user can define 3 temperature/speed trip points, and the chip will set the speed automatically according to the temperature changes. Signed-off-by: Phil Endecott <kernel@chezphil.org> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
| * hwmon/w83627ehf: Preserve speed reading when changing fan minJean Delvare2007-07-191-4/+9
| | | | | | | | | | | | | | | | | | The w83627ehf driver changes the fan clock divider automatically when a new min fan speed is set. It is supposed to preserve the fan speed reading while doing so, bug doesn't really. Fix it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
| * hwmon: fix detection of abituguru volt inputsHans de Goede2007-07-191-8/+18
| | | | | | | | | | | | | | | | This patch fixes the detection of volt inputs with a reading of more then 240 units. Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
| * hwmon: add SCH5317 to smsc47b397 driverJuerg Haefliger2007-07-191-2/+3
| | | | | | | | | | | | | | | | This patch adds the SMSC SCH5317 chip (device ID 0x85) as a supported device to the smsc47b397 driver. Signed-off-by: Juerg Haefliger <juergh at gmail.com> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
| * hwmon: convert it87 to platform drivercorentin.labbe2007-07-192-221/+277
| | | | | | | | | | | | | | | | This is the patch for converting it87 to a platform driver (and remove i2c-isa). Signed-off-by: Corentin LABBE <corentin.labbe@geomatys.fr> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
| * hwmon: Fix a potential race condition on unloadJean Delvare2007-07-196-5/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix a potential race condition when some hardware monitoring platform drivers are being unloaded. I believe that the driver data pointer shouldn't be cleared before all the sysfs files are removed, otherwise a sysfs callback might attempt to dereference a NULL pointer. I'm not sure exactly what the driver core protects drivers against, so let's play it safe. While we're here, clear the driver data pointer when probe fails, so as to not leave an invalid pointer behind us. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
| * hwmon: Convert vt8231 to a platform driverRoger Lucas2007-07-192-146/+174
| | | | | | | | | | | | | | | | | | Convert the vt8231 driver from the nonsensical i2c-isa hack to a regular platform driver. Signed-off-by: Roger Lucas <roger@planbit.co.uk> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
| * hwmon/sis5595: Use PCI_REVISION_IDJean Delvare2007-07-191-2/+1
| | | | | | | | | | | | Use PCI_REVISION_ID instead of our own define. Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * hwmon/sis5595: Use dynamic sysfs callbacksJean Delvare2007-07-191-106/+78
| | | | | | | | | | | | | | This lets us get rid of macro-generated functions and shrinks the driver size by about 7%. Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * hwmon/sis5595: Convert to a platform driverJean Delvare2007-07-192-149/+177
| | | | | | | | | | | | | | Convert the sis5595 driver from the nonsensical i2c-isa hack to a regular platform driver. Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * hwmon/via686a: Use dynamic sysfs callbacksJean Delvare2007-07-191-139/+111
| | | | | | | | | | | | | | This lets us get rid of macro-generated functions and shrinks the driver size by about 9%. Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * hwmon/via686a: Convert to a platform driverJean Delvare2007-07-192-132/+156
| | | | | | | | | | | | | | Convert the via686a driver from the nonsensical i2c-isa hack to a regular platform driver. Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * hwmon/via686a: Temperature interrupt configuration fixJean Delvare2007-07-191-2/+3
| | | | | | | | | | | | | | Fix the writing of the temperature interrupt configuration. The old code was working only by accident. Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * hwmon/w83627hf: Add PWM frequency selection supportCarlos Olalla Martinez2007-07-191-1/+140
| | | | | | | | | | Signed-off-by: Carlos Olalla <com.ea@tinet.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * hwmon/it87: Add IT8726F supportRudolf Marek2007-07-192-2/+7
| | | | | | | | | | | | | | | | Add support for IT8726F chip driver, which is just same as IT8716F with additional glue logic for AMD power sequencing. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * hwmon: Fault files naming conventionJean Delvare2007-07-194-14/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We have the following naming convention documented in Documentation/hwmon/sysfs-interface for fault files: in[0-*]_input_fault fan[1-*]_input_fault temp[1-*]_input_fault Some drivers follow this convention (lm63, lm83, lm90, smsc47m192). However some drivers omit the "input" part and create files named fan1_fault (pc87427) or temp1_fault (dme1737). And the new "generic" libsensors follows this second (non-standard) convention, so it fails to report fault conditions for drivers which follow the standard. We want a single naming scheme, and everyone seems to prefer the shorter variant, so let's go for it. Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * hwmon/lm90: Add support for the Maxim MAX6680/MAX6681Rainer Birkenmaier2007-07-192-18/+58
| | | | | | | | | | Signed-off-by: Rainer Birkenmaier <rainer.birkenmaier@siemens.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
| * hwmon: Use platform_device_add_data()Jean Delvare2007-07-193-18/+9
| | | | | | | | | | | | | | | | Use platform_device_add_data() in hardware monitoring drivers. This makes the code nicer and smaller too. Reported by David Hubbard. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: David Hubbard <david.c.hubbard@gmail.com>
| * hwmon/pc87360: Convert to a platform driverJean Delvare2007-07-192-97/+137
| | | | | | | | | | | | | | | | | | Convert the pc87360 driver from the nonsensical i2c-isa hack to a regular platform driver. This is a direct conversion, other cleanups could happen on top of that. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Jim Cromie <jim.cromie@gmail.com>
OpenPOWER on IntegriCloud