summaryrefslogtreecommitdiffstats
path: root/drivers/hwmon/w83627hf.c
Commit message (Collapse)AuthorAgeFilesLines
* hwmon: Check for ACPI resource conflictsJean Delvare2009-01-071-0/+5
| | | | | | | | | | | | | | | | | | Check for ACPI resource conflicts in hwmon drivers. I've included all Super-I/O and PCI drivers. I've voluntarily left out: * Vendor-specific drivers: if they conflicted on any system, this would pretty much mean that they conflict on all systems, and we would know by now. * Legacy ISA drivers (lm78 and w83781d): they only support chips found on old designs were ACPI either wasn't supported or didn't deal with thermal management. * Drivers accessing the I/O resources indirectly (e.g. through SMBus): the checks are already done where they belong, i.e. in the bus drivers. Signed-off-by: Jean Delvare <jdelvare@suse.de> Acked-by: David Hubbard <david.c.hubbard@gmail.com>
* hwmon: (w83627hf) Drop reset module parameterJean Delvare2008-08-061-27/+0
| | | | | | | | | | | | | | | Drop the reset parameter of the w83627hf driver. It seems it wasn't that useful. It was dropped from the Linux 2.4 version of this driver back in July 2004. The only users who have reported that they were still using this parameter, needed it to switch the chip from automatic fan speed control back to manual mode. Now that the driver creates pwmN_enable sysfs files, users will be able to use these files instead, which is way less agressive. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Dominik Geyer <dominik.geyer@gmx.de>
* hwmon: (w83627hf) Add pwm_enable sysfs interfaceDominik Geyer2008-08-061-0/+74
| | | | | | | Adds support for pwm_enable sysfs interface for the w83627hf driver. Signed-off-by: Dominik Geyer <dominik.geyer@gmx.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: (w83627hf) Refactor beep enable handlingJean Delvare2008-02-071-51/+25
| | | | | | | | We can handle the beep enable bit as any other beep mask bit for slightly smaller code. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: (w83627hf) Add individual alarm and beep filesJean Delvare2008-02-071-3/+139
| | | | | | | | | | The new libsensors needs these individual alarm and beep files. The code was copied from the w83781d driver. I've tested the alarm files on a W83627THF. I couldn't test the beep files as the system in question doesn't have a speaker. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: (w83627hf) Enable VBAT monitoringJean Delvare2008-02-071-0/+5
| | | | | | | | | | | If VBAT monitoring is disabled, enable it. Bug reported on the lm-sensors trac system: http://lm-sensors.org/ticket/2282 This is the exact same patch that was applied to the w83627ehf driver 6 months ago. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: Let the user override the detected Super-I/O device IDJean Delvare2008-02-071-1/+5
| | | | | | | | | | | | | | | | | | | | | | | While it is possible to force SMBus-based hardware monitoring chip drivers to drive a not officially supported device, we do not have this possibility for Super-I/O-based drivers. That's unfortunate because sometimes newer chips are fully compatible and just forcing the driver to load would work. Instead of that we have to tell the users to recompile the kernel driver, which isn't an easy task for everyone. So, I propose that we add a module parameter to all Super-I/O based hardware monitoring drivers, letting advanced users force the driver to load on their machine. The user has to provide the device ID of a supposedly compatible device. This requires looking at the source code or a datasheet, so I am confident that users can't randomly force a driver without knowing what they are doing. Thus this should be relatively safe. As you can see from the code, the implementation is pretty simple and unintrusive. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: (w83627hf) push nr+1 offset into *_REG_FAN macros and simplifyJim Cromie2007-11-081-13/+14
| | | | | | | | | | patch changes 2 macros to incorporate the +1, and drops the +1 from all the callers. This also allows a 'reroll' of an expanded loop, and adjusting indexes and loop limits on another. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: (w83627hf) hoist nr-1 offset out of show-store-temp-XJim Cromie2007-11-081-84/+42
| | | | | | | | | | | | | | | | This hoists nr-1 offset out of (show|store)_temp_*(.*) callbacks, and into SENSOR_DEVICE_ATTRs for sysfs tempN_X files. It also combines temp[1] and temp_add[2] (array) fields in w83627hf_data into 3 elem arrays, which simplifies special-case handling of nr, allowing simplification of callback bodies and rerolling a flattened loop in w83627hf_update_device(struct device *dev). The array conversion changes temp[1] from u8 to u16, but this was happening implicitly via the helper functions anyway. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: (w83627hf) don't assume bank 0Jean Delvare2007-10-131-22/+22
| | | | | | | | | | | | | | | | The bank switching code assumes that the bank selector is set to 0 when the driver is loaded. This might not be the case. This is exactly the same bug as was fixed in the w83627ehf driver two months ago: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=0956895aa6f8dc6a33210967252fd7787652537d In practice, this bug was causing the sensor thermal types to be improperly reported for my W83627THF the first time I was loading the w83627hf driver. From the driver history, I'd say that it has been broken since September 2005 (when we stopped resetting the chip by default at driver load.) Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: (w83627hf) Fix setting fan min right after driver loadJean Delvare2007-10-131-12/+22
| | | | | | | | | | We need to read the fan clock dividers at initialization time, otherwise the code in store_fan_min() may use uninitialized values. That's pretty much the same bug and same fix as for the w83627ehf driver last month. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: (w83627hf) De-macro sysfs callback functionsJim Cromie2007-10-131-359/+342
| | | | | | | | | | This patch to drivers/hwmon/w83627hf converts many sysfs items from DEVICE_ATTRs to SENSOR_DEVICE_ATTRs, and replaces macros which expand to define redundant callbacks, with callbacks which use the SENSOR_DEV.nr to know what to do. Signed-off-by: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: VRM is not read from registersJean Delvare2007-10-091-1/+1
| | | | | | | | | | The VRM value is not read from chip registers, so there's no need to update the device data cache before exporting the VRM value to user-space. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: Convert from class_device to deviceTony Jones2007-10-091-5/+5
| | | | | | | | | Convert from class_device to device for hwmon_device_register/unregister Signed-off-by: Tony Jones <tonyj@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: Don't export thermistor betaJean Delvare2007-10-091-9/+10
| | | | | | | | | Deprecate the use of thermistor beta values as thermal sensor types. No driver supports changing the beta value anyway. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: Allow writing of negative trigger temperaturesChristian Hohnstaedt2007-10-091-3/+3
| | | | | | | | | - replace differing temperature variable types by long - use strtol() instead of strtoul() for conversion Signed-off-by: Christian Hohnstaedt <chohnstaedt@innominate.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: Add missing __devexit tags in various driversJean Delvare2007-07-301-1/+1
| | | | | | | | | | | | | | On Sun, 22 Jul 2007 00:30:56 +0200, Gabriel C wrote: > I noticed this warnings on current git: > > drivers/hwmon/pc87360.c:1082: warning: 'pc87360_remove' defined but not used > drivers/hwmon/sis5595.c:580: warning: 'sis5595_remove' defined but not used > drivers/hwmon/smsc47m1.c:608: warning: 'smsc47m1_remove' defined but not used > drivers/hwmon/via686a.c:648: warning: 'via686a_remove' defined but not used > drivers/hwmon/vt8231.c:755: warning: 'vt8231_remove' defined but not used Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon: Fix a potential race condition on unloadJean Delvare2007-07-191-1/+2
| | | | | | | | | | | | | | | Fix a potential race condition when some hardware monitoring platform drivers are being unloaded. I believe that the driver data pointer shouldn't be cleared before all the sysfs files are removed, otherwise a sysfs callback might attempt to dereference a NULL pointer. I'm not sure exactly what the driver core protects drivers against, so let's play it safe. While we're here, clear the driver data pointer when probe fails, so as to not leave an invalid pointer behind us. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
* hwmon/w83627hf: Add PWM frequency selection supportCarlos Olalla Martinez2007-07-191-1/+140
| | | | | Signed-off-by: Carlos Olalla <com.ea@tinet.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: Use platform_device_add_data()Jean Delvare2007-07-191-6/+3
| | | | | | | | Use platform_device_add_data() in hardware monitoring drivers. This makes the code nicer and smaller too. Reported by David Hubbard. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: David Hubbard <david.c.hubbard@gmail.com>
* hwmon/w83627hf: Be quiet when no chip is foundJean Delvare2007-05-271-1/+3
| | | | Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon/w83627hf: Convert to a platform driverJean Delvare2007-05-081-281/+310
| | | | | | | Convert the w83627hf driver from the nonsensical i2c-isa hack to a regular platform driver. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon/w83627hf: Preliminary cleanupsJean Delvare2007-05-081-40/+36
| | | | | | | | | | | | | | | | Some preliminary cleanups to the w83627hf hardware monitoring driver, to make its conversion to a platform driver easier: * Add missing include ioport.h * Drop unused enum value any_chip * Group module parameters * Define and use DRVNAME * Drop unused struct member lm75 * Move the handling of force_addr and device activation to w83627hf_find * Consistently use local type in w83627hf_init_client Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: Only call vid_which_vrm() when neededJean Delvare2007-05-081-4/+5
| | | | | | | | | | | Some hardware monitoring drivers create the VID/VRM interface files conditionally depending on the chip model or configuration. We should only call vid_which_vrm() when we are actually going to create the files. Not only it is more logical and efficient that way, but it also prevents printing unnecessary warnings such as the one reported here: http://lists.lm-sensors.org/pipermail/lm-sensors/2007-February/018954.html Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: Cleanup a bogus legacy commentJean Delvare2007-02-141-3/+2
| | | | | | | Cleanup a bogus legacy comment that has been replicated to many hardware monitoring drivers. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* hwmon: Fix unchecked return status, batch 1Mark M. Hoffman2006-09-281-94/+138
| | | | | | | | | | | | hwmon: Fix unchecked return status, batch 1 Fix up some hwmon drivers so that they no longer ignore return status from device_create_file(). Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* i2c-isa: Restore driver ownerJean Delvare2006-09-261-0/+1
| | | | | | | | | | | | i2c-isa: Restore driver owner Commit 2b48716d1d2f2edb1e7cbc5ecf1cb2cb39373e33 back in January 2006 was a bit overzealous. It removed .owner from all i2c drivers, including i2c-isa ones, while they still need it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* spelling fixesAndreas Mohr2006-06-261-1/+1
| | | | | | | | | | | | acquired (aquired) contiguous (contigious) successful (succesful, succesfull) surprise (suprise) whether (weather) some other misspellings Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* [PATCH] I2C: hwmon: Rename register parametersDarren Jenkins2006-03-231-3/+2
| | | | | | | | | | | | "register" is a reserved keyword so using it as a parameter name can confuse some compilers, most notably ICC. The patch below just renames all occurences to reg which fits the actual function declarations. Signed-off-by: Darren Jenkins <darrenrjenkins@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: Add support for the Winbond W83687THFJean Delvare2006-03-231-14/+58
| | | | | | | | | | Add support for the Winbond W83687THF chip to the w83627hf hardware monitoring driver. This new chip is almost similar to the already supported W83627THF chip, except for VID and a few other minor changes. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: Semaphore to mutex conversionsIngo Molnar2006-03-231-28/+29
| | | | | | | | | | | | | convert drivers/hwmon/*.c semaphore use to mutexes. the conversion was generated via scripts, and the result was validated automatically via a script as well. all affected hwmon drivers were build-tested. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] I2C: Remove .owner setting from i2c_driver as it's no longer neededGreg Kroah-Hartman2006-01-051-1/+0
| | | | | | | | | | Now that i2c_add_driver() doesn't need the module owner to be set by hand, we can delete it from the drivers. This patch catches all of the drivers that I found in the current tree (if a driver sets the .owner by hand, it's not a problem, just not needed.) Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Cc: Jean Delvare <khali@linux-fr.org>
* [PATCH] i2c: Drop i2c_driver.{owner,name}, 3 of 11Laurent Riffard2006-01-051-3/+5
| | | | | | | | | | | We should use the i2c_driver.driver's .name and .owner fields instead of the i2c_driver's ones. This patch updates the hwmon drivers. Signed-off-by: Laurent Riffard <laurent.riffard@free.fr> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: W83627THF VID fixesYuan Mu2006-01-051-9/+7
| | | | | | | | | This patch fixes the VID reading; no cpu0_vid and vrm files created if the chip is w83627thf and GPIO5 not enabled. Signed-off-by: Yuan Mu <ymu@winbond.com.tw> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: Fix missing boundary check when setting W83627THF in0 limitsYuan Mu2005-11-231-2/+6
| | | | | | | | | Add SENSORS_LIMIT in store VCore limit functions. This fixes a potential u8 overflow on out-of-range user input. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] hwmon: Fix two w83627hf bugsYuan Mu2005-11-071-12/+4
| | | | | | | | * Fix in4 reads for W83627THF and W83637HF chips. * Use the correct register for alarm flags. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: kzalloc conversionDeepak Saxena2005-10-281-2/+1
| | | | | | | | | Use kzalloc instead of kmalloc+memset in all hardware monitoring drivers. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: Drop useless w83627hf initialization stepJean Delvare2005-10-281-7/+0
| | | | | | | | | | | Drop a useless initialization step in the w83627hf driver. The comment says that the W83627HF PWM2 can be disabled, but it can't. I suppose this is a leftover from the w83781d driver (from which the w83627hf driver is derived), as for example the W83782D had the ability to disable PWM2. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: Fix w83627ehf/hf vs PNPACPI conflict (bug #4014)Petr Vandrovec2005-10-281-8/+13
| | | | | | | | | | | | | | | | | | | | | | | | This patch changes w83627hf and w83627ehf drivers to reserve only ports 0x295-0x296, instead of full 0x290-0x297 range. While some other sensors chips respond to all addresses in 0x290-0x297 range, Winbond chips respond to 0x295-0x296 only (this behavior is implied by documentation, and matches behavior observed on real systems). This is not problem alone, as no BIOS was found to put something at these unused addresses, and sensors chip itself provides nothing there as well. But in addition to only respond to these two addresses, also BIOS vendors report in their ACPI-PnP structures that there is some resource at I/O address 0x295 of length 2. And when later this hwmon driver attempts to request region with base 0x290/length 8, it fails as one request_region cannot span more than one device. Due to this we have to ask only for region this hardware really occupies, otherwise driver cannot be loaded on systems with ACPI-PnP enabled. Signed-off-by: Petr Vandrovec <vandrove@vc.cvut.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: Discard bogus comment about init setting limitsJean Delvare2005-10-281-1/+0
| | | | | | | | | | | | | | | | Discard a common out-of-date comment in 5 hardware monitoring drivers. The hardware monitoring chip drivers are no more setting sensor limits at initialization time, for quite some time already. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/hwmon/lm78.c | 1 - drivers/hwmon/via686a.c | 1 - drivers/hwmon/w83627hf.c | 1 - drivers/hwmon/w83781d.c | 1 - drivers/hwmon/w83792d.c | 1 - 5 files changed, 5 deletions(-)
* [PATCH] hwmon: w83627hf: no reset by defaultJean Delvare2005-09-091-1/+13
| | | | | | | | | | | | | Make the reset of the chips in w83627hf optional rather than the default. This reset has been causing trouble several times already. It may even go completely away unless it proves to be useful to at least one user. Closes bug #5168: http://bugzilla.kernel.org/show_bug.cgi?id=5168 Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: hwmon vs i2c, second round (07/11)Jean Delvare2005-09-051-2/+2
| | | | | | | | | | | | | The only part left in i2c-sensor is the VRM/VRD/VID handling code. This is in no way related to i2c, so it doesn't belong there. Move the code to hwmon, where it belongs. Note that not all hardware monitoring drivers do VRM/VRD/VID operations, so less drivers depend on hwmon-vid than there were depending on i2c-sensor. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: hwmon vs i2c, second round (06/11)Jean Delvare2005-09-051-1/+0
| | | | | | | | | | | The only thing left in i2c-sensor.h are module parameter definition macros. It's only an extension of what i2c.h offers, and this extension is not sensors-specific. As a matter of fact, a few non-sensors drivers use them. So we better merge them in i2c.h, and get rid of i2c-sensor.h altogether. Signed-off-by: Jean Delvare <khali@linux-fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] hwmon: tag super-i/o find functions __initJean Delvare2005-09-051-1/+1
| | | | | | | | | | | | | Super-I/O find functions in hardware monitoring drivers can be tagged __init as they are only called from functions themselves tagged __init. Two of them (smsc47b397 and w83627ehf) already do, but the other four of them (it87, pc87360, smsc47m1 and w83627hf) did not. This saves a few bytes of memory after the drivers are loaded, 192 in the case of the it87 driver. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] I2C: refactor message in i2c_detach_clientJean Delvare2005-09-051-4/+1
| | | | | | | | | | | | We could refactor the error message 34 different i2c drivers print if i2c_detach_client() fails in this function itself. Saves quite a few lines of code. Documentation is updated to reflect that change. Note that this patch should be applied after Rudolf Marek's w83792d patches. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] I2C: Separate non-i2c hwmon drivers from i2c-core (5/9)Jean Delvare2005-09-051-37/+12
| | | | | | | | | | | | | | | Call the ISA chip drivers detection function directly instead of relying on i2c_detect. The net effect is that address lists won't be handled anymore, but they were mostly useless in the ISA case anyway (pc87360, smsc47m1, smsc47b397 had already dropped them). We don't need to handle multiple devices, all we may need is a way to force a given address instead of the original one (some drivers already do: sis5595, via686a, w83627hf), and, for drivers supporting multiple chips, a way to force one given kind. All this may be added later on demand, but I actually don't think there will be much demand. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] I2C: Separate non-i2c hwmon drivers from i2c-core (3/9)Jean Delvare2005-09-051-2/+3
| | | | | | | | | | | | | | Convert the 10 ISA hardware monitoring drivers (it87, lm78, pc87360, sis5595, smsc47b397, smsc47m1, via686a, w83627hf, w83627ehf, w83781d) to explicitely register with i2c-isa. For hybrid drivers (it87, lm78, w83781d), we now have two separate instances of i2c_driver, one for the I2C interface of the chip, and one for ISA interface. In the long run, the one for ISA will be replaced with a different driver type. At this point, all drivers are working again, except for missing dependencies in Kconfig. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] I2C hwmon: add hwmon sysfs class to driversMark M. Hoffman2005-09-051-1/+15
| | | | | | | | | This patch modifies sensors chip drivers to make use of the new sysfs class "hwmon". Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] I2C: Move hwmon drivers (2/3)Jean Delvare2005-07-111-0/+1511
Part 2: Move the driver files themselves. Note that the patch "adds trailing whitespace", because it does move the files as-is, and some files happen to have trailing whitespace. From: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
OpenPOWER on IntegriCloud