summaryrefslogtreecommitdiffstats
path: root/drivers/hid/usbhid/hid-core.c
Commit message (Collapse)AuthorAgeFilesLines
* treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner2019-05-301-4/+1
| | | | | | | | | | | | | | | | | | | | | Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* HID: usbhid: use irqsave() in USB's complete callbackSebastian Andrzej Siewior2018-06-251-3/+4
| | | | | | | | | | | | | | | | The USB completion callback does not disable interrupts while acquiring the ->lock. We want to remove the local_irq_disable() invocation from __usb_hcd_giveback_urb() and therefore it is required for the callback handler to disable the interrupts while acquiring the lock. The callback may be invoked either in IRQ or BH context depending on the USB host controller. Use the _irqsave() variant of the locking primitives. Cc: Jiri Kosina <jikos@kernel.org> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: linux-input@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* HID: usbhid: extend the polling interval configuration to keyboardsFilip Alac2018-03-231-1/+11
| | | | | | | | | | | | | | For mouse and joystick devices user can change the polling interval via usbhid.mousepoll and usbhid.jspoll. Implement the same thing for keyboards, so user can reduce(or increase) input latency this way. This has been tested with a Cooler Master Devastator with kbpoll=32, resulting in delay between events of 32 ms(values were taken from evtest). Signed-off-by: Filip Alac <filipalac@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* HID: Ignore Jabra HID interface based on firmware versionNiels Skou Olsen2017-11-211-0/+1
| | | | | | | | | | | | | | | | Two Jabra speakerphone devices were added to the ignore list in 2013, because the device HID interfaces didn't work well with kernel usbhid driver, and could cause volume key event storm. See the original commit: Commit 31b9779cb292 ("HID: ignore Jabra speakerphones HID interface") Modify hid_lookup_quirk() to consider the firmware version of these two devices, so that only versions older than a known good version are ignored. Signed-off-by: Niels Skou Olsen <nolsen@jabra.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* HID: core: move the dynamic quirks handling in coreBenjamin Tissoires2017-11-211-6/+4
| | | | | | | | | usbhid has a list of dynamic quirks in addition to a list of static quirks. There is not much USB specific in that, so move this part of the module in core so we can have one central place for quirks. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* Merge branch 'for-4.15/use-timer-setup' into for-linusJiri Kosina2017-11-151-4/+4
|\ | | | | | | | | | | - usbhid: conversion to timer_setup() and from_timer() from Kees Cook Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * HID: usbhid: Convert timers to use timer_setup()Kees Cook2017-10-111-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() (introduced by 686fef928bba ("timer: Prepare to change timer callback argument type")) to pass the timer pointer explicitly. Adds pointer back to hid_device for multitouch. [jkosina@suse.cz: extend changelog a little bit as asked for by Benjamin] Cc: Jiri Kosina <jikos@kernel.org> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: linux-input@vger.kernel.org Cc: linux-usb@vger.kernel.org Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | HID: usbhid: fix out-of-bounds bugJaejoong Kim2017-10-111-1/+11
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The hid descriptor identifies the length and type of subordinate descriptors for a device. If the received hid descriptor is smaller than the size of the struct hid_descriptor, it is possible to cause out-of-bounds. In addition, if bNumDescriptors of the hid descriptor have an incorrect value, this can also cause out-of-bounds while approaching hdesc->desc[n]. So check the size of hid descriptor and bNumDescriptors. BUG: KASAN: slab-out-of-bounds in usbhid_parse+0x9b1/0xa20 Read of size 1 at addr ffff88006c5f8edf by task kworker/1:2/1261 CPU: 1 PID: 1261 Comm: kworker/1:2 Not tainted 4.14.0-rc1-42251-gebb2c2437d80 #169 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:16 dump_stack+0x292/0x395 lib/dump_stack.c:52 print_address_description+0x78/0x280 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 kasan_report+0x22f/0x340 mm/kasan/report.c:409 __asan_report_load1_noabort+0x19/0x20 mm/kasan/report.c:427 usbhid_parse+0x9b1/0xa20 drivers/hid/usbhid/hid-core.c:1004 hid_add_device+0x16b/0xb30 drivers/hid/hid-core.c:2944 usbhid_probe+0xc28/0x1100 drivers/hid/usbhid/hid-core.c:1369 usb_probe_interface+0x35d/0x8e0 drivers/usb/core/driver.c:361 really_probe drivers/base/dd.c:413 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463 __device_attach+0x26e/0x3d0 drivers/base/dd.c:710 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523 device_add+0xd0b/0x1660 drivers/base/core.c:1835 usb_set_configuration+0x104e/0x1870 drivers/usb/core/message.c:1932 generic_probe+0x73/0xe0 drivers/usb/core/generic.c:174 usb_probe_device+0xaf/0xe0 drivers/usb/core/driver.c:266 really_probe drivers/base/dd.c:413 driver_probe_device+0x610/0xa00 drivers/base/dd.c:557 __device_attach_driver+0x230/0x290 drivers/base/dd.c:653 bus_for_each_drv+0x161/0x210 drivers/base/bus.c:463 __device_attach+0x26e/0x3d0 drivers/base/dd.c:710 device_initial_probe+0x1f/0x30 drivers/base/dd.c:757 bus_probe_device+0x1eb/0x290 drivers/base/bus.c:523 device_add+0xd0b/0x1660 drivers/base/core.c:1835 usb_new_device+0x7b8/0x1020 drivers/usb/core/hub.c:2457 hub_port_connect drivers/usb/core/hub.c:4903 hub_port_connect_change drivers/usb/core/hub.c:5009 port_event drivers/usb/core/hub.c:5115 hub_event+0x194d/0x3740 drivers/usb/core/hub.c:5195 process_one_work+0xc7f/0x1db0 kernel/workqueue.c:2119 worker_thread+0x221/0x1850 kernel/workqueue.c:2253 kthread+0x3a1/0x470 kernel/kthread.c:231 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431 Cc: stable@vger.kernel.org Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Jaejoong Kim <climbbb.kim@gmail.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* Merge branch 'for-4.14/wacom' into for-linusJiri Kosina2017-09-051-1/+2
|\ | | | | | | | | - name generation improvement for Wacom devices from Jason Gerecke - Kconfig dependency fix for Wacom driver from Arnd Bergmann
| * HID: introduce hid_is_using_ll_driverJason Gerecke2017-07-271-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Although HID itself is transport-agnostic, occasionally a driver may want to interact with the low-level transport that a device is connected through. To do this, we need to know what kind of bus is in use. The first guess may be to look at the 'bus' field of the 'struct hid_device', but this field may be emulated in some cases (e.g. uhid). More ideally, we can check which ll_driver a device is using. This function introduces a 'hid_is_using_ll_driver' function and makes the 'struct hid_ll_driver' of the four most common transports accessible through hid.h. Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Acked-By: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | HID: usbhid: fix "always poll" quirkDmitry Torokhov2017-07-211-6/+10
|/ | | | | | | | | | | | | Even though the IO for devices with "always poll" quirk is already running, we still need to set HID_OPENED bit in usbhid->iofl so the interrupt handler does not ignore the data coming from the device. Reported-by: Olof Johansson <olof@lixom.net> Tested-by: Olof Johansson <olof@lixom.net> Fixes: e399396a6b0 ("HID: usbhid: remove custom locking from usbhid_open...") Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* HID: usbhid: remove custom locking from usbhid_open/closeDmitry Torokhov2017-06-081-62/+53
| | | | | | | | | | Now that HID core enforces serialization of transport driver open/close calls we can remove custom locking from usbhid driver. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* HID: usbhid: do not rely on hid->open when deciding to do IODmitry Torokhov2017-06-081-7/+18
| | | | | | | | | | | | Instead of checking hid->open (that we plan on having HID core manage) in hid_start_in(), let's allocate a couple of new flags: HID_IN_POLLING and HID_OPENED, and use them to decide whether we should be submitting URBs or not. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* HID: hiddev: use hid_hw_power instead of usbhid_get/put_powerDmitry Torokhov2017-06-081-17/+5
| | | | | | | | | | | | | | Instead of calling into usbhid code directly, let's use the standard accessors for the transport HID drivers, and stop clobbering their error codes with -EIO. This also allows us to remove usbhid_get/put_power(), leaving only usbhid_power(). Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* HID: hiddev: use hid_hw_open/close instead of usbhid_open/closeDmitry Torokhov2017-06-081-2/+2
| | | | | | | | | | | | | Instead of calling into usbhid code directly, let's use the standard accessors for the transport HID drivers, and stop clobbering their errors with -EIO. This also allows us make usbhid_open and close static. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
*---. Merge branches 'for-4.11/upstream-fixes', 'for-4.12/accutouch', ↵Jiri Kosina2017-05-021-20/+25
|\ \ \ | | | | | | | | | | | | 'for-4.12/cp2112', 'for-4.12/hid-core-null-state-handling', 'for-4.12/hiddev', 'for-4.12/i2c-hid', 'for-4.12/innomedia', 'for-4.12/logitech-hidpp-battery-power-supply', 'for-4.12/multitouch', 'for-4.12/nti', 'for-4.12/upstream' and 'for-4.12/wacom' into for-linus
| | | * HID: usbhid: Use pr_<level> and remove unnecessary OOM messagesJoe Perches2017-03-061-9/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use a more common logging style and remove the unnecessary OOM messages as there is default dump_stack when OOM. Miscellanea: o Hoist an assignment in an if o Realign arguments o Realign a deeply indented if descendent above a printk Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | | * HID: usbhid: extend polling interval configuration to joysticksTobias Jakobi2017-03-061-3/+15
| |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For mouse devices we can currently change the polling interval via usbhid.mousepoll. Implement the same thing for joysticks, so users can reduce input latency this way. This has been tested with a Logitech RumblePad 2 with jspoll=2, resulting in a polling rate of 500Hz (verified with evhz). Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * | HID: remove initial reading of reports at connectBenjamin Tissoires2017-03-211-8/+3
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It looks like a bunch of devices do not like to be polled for their reports at init time. When you look into the details, it seems that for those that are requiring the quirk HID_QUIRK_NO_INIT_REPORTS, the driver fails to retrieve part of the features/inputs while others (more generic) work. IMO, it should be acceptable to remove the need for the quirk in the general case. On the small amount of cases where we actually need to read the current values, the driver in charge (hid-mt or wacom) already retrieves the features manually. There are 2 cases where we might need to retrieve the reports at init: 1. hiddev devices with specific use-space tool 2. a device that would require the driver to fetch a specific feature/input at plug For case 2, I have seen this a few time on hid-multitouch. It is solved in hid-multitouch directly by fetching the feature. I hope it won't be too common and this can be solved on a per-case basis (crossing fingers). For case 1, we moved the implementation of HID_QUIRK_NO_INIT_REPORTS in hiddev. When somebody starts calling ioctls that needs an initial update, the hiddev device will fetch the initial state of the reports to mimic the current behavior. This adds a small amount of time during the first HIDIOCGUSAGE(S), but it should be acceptable in most cases. To keep the currently known broken devices, we have to keep around HID_QUIRK_NO_INIT_REPORTS, but the scope will only be for hiddev. Note that I don't think hidraw would be affected and I checked that the FF drivers that need to interact with the report fields are all using output reports, which are not initialized by usbhid_init_reports(). NO_INIT_INPUT_REPORTS is then replaced by HID_QUIRK_NO_INIT_REPORTS: there is no point keeping it for just one device. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | HID: remove use of DRIVER_LICENSEGrant Grundler2017-01-061-2/+1
| | | | | | | | | | | | | | | | | | | | Local "#define DRIVER_LICENSE" obfuscates which license is used in MODULE_LICENSE(). "fgrep -R MODULE_LICENSE" is more informative when the string is hard coded in MODULE_LICENSE. Signed-off-by: Grant Grundler <grundler@google.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | HID: usbhid: fix improper return valuePan Bian2016-12-091-3/+3
|/ | | | | | | | | Function hid_post_reset() should return negative error codes on failures. However, in its implementation, it incorrectly returns 1. This patch fixes the bug, returning proper error codes on failures. Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* HID: usbhid: fix inconsistent reset/resume/reset-resume behaviorAlan Stern2016-03-241-36/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The usbhid driver has inconsistently duplicated code in its post-reset, resume, and reset-resume pathways. reset-resume doesn't check HID_STARTED before trying to restart the I/O queues. resume fails to clear the HID_SUSPENDED flag if HID_STARTED isn't set. resume calls usbhid_restart_queues() with usbhid->lock held and the others call it without holding the lock. The first item in particular causes a problem following a reset-resume if the driver hasn't started up its I/O. URB submission fails because usbhid->urbin is NULL, and this triggers an unending reset-retry loop. This patch fixes the problem by creating a new subroutine, hid_restart_io(), to carry out all the common activities. It also adds some checks that were missing in the original code: After a reset, there's no need to clear any halted endpoints. After a resume, if a reset is pending there's no need to restart any I/O until the reset is finished. After a resume, if the interrupt-IN endpoint is halted there's no need to submit the input URB until the halt has been cleared. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Daniel Fraga <fragabr@gmail.com> Tested-by: Daniel Fraga <fragabr@gmail.com> CC: <stable@vger.kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* HID: usbhid: fix recursive deadlockIoan-Adrian Ratiu2015-12-011-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The critical section protected by usbhid->lock in hid_ctrl() is too big and because of this it causes a recursive deadlock. "Too big" means the case statement and the call to hid_input_report() do not need to be protected by the spinlock (no URB operations are done inside them). The deadlock happens because in certain rare cases drivers try to grab the lock while handling the ctrl irq which grabs the lock before them as described above. For example newer wacom tablets like 056a:033c try to reschedule proximity reads from wacom_intuos_schedule_prox_event() calling hid_hw_request() -> usbhid_request() -> usbhid_submit_report() which tries to grab the usbhid lock already held by hid_ctrl(). There are two ways to get out of this deadlock: 1. Make the drivers work "around" the ctrl critical region, in the wacom case for ex. by delaying the scheduling of the proximity read request itself to a workqueue. 2. Shrink the critical region so the usbhid lock protects only the instructions which modify usbhid state, calling hid_input_report() with the spinlock unlocked, allowing the device driver to grab the lock first, finish and then grab the lock afterwards in hid_ctrl(). This patch implements the 2nd solution. Signed-off-by: Ioan-Adrian Ratiu <adi@adirat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* HID: usbhid: discarded events don't abort idlenessOliver Neukum2015-11-231-1/+1
| | | | | | | | | | If an event is discarded the device stays idle. Just reverse the order of check and marking busy. Found by code inspection. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* HID: usbhid: Fix the check for HID_RESET_PENDING in hid_io_errorDon Zickus2015-08-181-1/+1
| | | | | | | | | | | | | | | | | | It was reported that after 10-20 reboots, a usb keyboard plugged into a docking station would not work unless it was replugged in. Using usbmon, it turns out the interrupt URBs were streaming with callback errors of -71 for some reason. The hid-core.c::hid_io_error was supposed to retry and then reset, but the reset wasn't really happening. The check for HID_NO_BANDWIDTH was inverted. Fix was simple. Tested by reporter and locally by me by unplugging a keyboard halfway until I could recreate a stream of errors but no disconnect. Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* HID: usbhid: no flushing if device is already polledOliver Neukum2015-07-081-1/+2
| | | | | | | | | During open() it is unnecessary to wait for the device to flush stale inputs if the device is polled while closed due to a quirk or opening fails. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
*-. Merge branches 'for-3.19/hid-report-len', 'for-3.19/i2c-hid', ↵Jiri Kosina2014-12-121-2/+1
|\ \ | | | | | | | | | 'for-3.19/lenovo', 'for-3.19/logitech', 'for-3.19/microsoft', 'for-3.19/plantronics', 'for-3.19/rmi', 'for-3.19/sony' and 'for-3.19/wacom' into for-linus
| * | HID: make hid_report_len as a static inline function in hid.hMathieu Magnaudet2014-12-011-2/+1
| |/ | | | | | | | | | | | | | | | | | | | | In several hid drivers it is necessary to calculate the length of an hid_report. This patch exports the existing static function hid_report_len of hid-core.c as an inline function in hid.h Signed-off-by: Mathieu Magnaudet <mathieu.magnaudet@enac.fr> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | HID: usbhid: prevent unwanted events to be sent when re-opening the deviceBenjamin Tissoires2014-10-291-12/+24
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When events occurs while no one is listening to the node (hid->open == 0 and usb_kill_urb() called) some events are still stacked somewhere in the USB (kernel or device?) stack. When the node gets reopened, these events are drained, and this results in spurious touch down/up, or mouse button clicks. The problem was spotted with touchscreens in fdo bug #81781 [1], but it actually occurs with any mouse using hid-generic or touchscreen. A way to reproduce it is to call: $ xinput disable 9 ; sleep 5 ; xinput enable 9 With 9 being the device ID for the touchscreen/mouse. During the "sleep", produce some touch events or click events. When "xinput enable" is called, at least one click is generated. This patch tries to fix this by draining the queue for 50 msec and during this time frame, not forwarding these old events to the hid layer. Hans completed the explanation: """ Devices like mice (basically any hid device) will have a fifo on the device side, when we stop submitting urbs to get hid reports from it, that fifo will fill up, and when we resume we will get whatever is there in that fifo. """ [1] https://bugs.freedesktop.org/show_bug.cgi?id=81781 Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
*-. Merge branches 'for-3.18/always-poll-quirk', 'for-3.18/logitech', ↵Jiri Kosina2014-10-061-28/+32
|\ \ | | | | | | | | | 'for-3.18/picolcd', 'for-3.18/rmi', 'for-3.18/sony', 'for-3.18/uhid', 'for-3.18/upstream' and 'for-3.18/wacom' into for-linus
| | * HID: usbhid: improve handling of Clear-Halt and resetAlan Stern2014-09-031-25/+9
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch changes the way usbhid carries out Clear-Halt and reset. Currently, after a Clear-Halt on the interrupt-IN endpoint, the driver immediately restarts the interrupt URB, even if the Clear-Halt failed. This doesn't work out well when the reason for the failure was that the device was disconnected (when a low- or full-speed device is connected through a hub to an EHCI controller, transfer errors caused by disconnection are reported as stalls by the hub). Instead now the driver will attempt a reset after a failed Clear-Halt. The way resets are carried out is also changed. Now the driver will call usb_queue_reset_device() instead of calling usb_reset_device() directly. This avoids a deadlock that would arise when a device is unplugged: The hid_reset() routine runs as a workqueue item, a reset attempt after the device has been unplugged will fail, failure will cause usbhid to be unbound, and the disconnect routine will try to do cancel_work_sync(). The usb_queue_reset_device() implementation is carefully written to handle scenarios like this one properly. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * HID: usbhid: add always-poll quirkJohan Hovold2014-09-081-3/+23
|/ | | | | | | | | | | | Add quirk to make sure that a device is always polled for input events even if it hasn't been opened. This is needed for devices that disconnects from the bus unless the interrupt endpoint has been polled at least once or when not responding to an input event (e.g. after having shut down X). Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* HID: usbhid: Use flag HID_DISCONNECTED when a usb device is removedReyad Attiyat2014-07-291-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Set disconnected flag in struct usbhid when a usb device is removed. Check for disconnected flag before sending urb requests. This prevents a kernel panic when a hid driver calls hid_hw_request() after removing a usb device. BUG: unable to handle kernel NULL pointer dereference at 0000000000000058 IP: [<ffffffff8161746f>] hid_submit_ctrl+0x7f/0x290 PGD 0 Oops: 0002 [#1] PREEMPT SMP CPU: 2 PID: 39 Comm: khubd Tainted: G IO 3.16.0-rc5+ #112 Hardware name: Microsoft Corporation Surface Pro 2/Surface Pro 2, BIOS 2.03.0250 09/06/2013 task: ffff880118aba6e0 ti: ffff8800daf80000 task.ti: ffff8800daf80000 RIP: 0010:[<ffffffff8161746f>] [<ffffffff8161746f>] hid_submit_ctrl+0x7f/0x290 RSP: 0018:ffff8800daf83750 EFLAGS: 00010086 RAX: 0000000080000300 RBX: ffff88003f60c000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff880117f78000 RBP: ffff8800daf83788 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: ffff880117f78000 R13: ffff88003f11a290 R14: 000000000000000c R15: ffff880091cb3ab8 FS: 0000000000000000(0000) GS:ffff88011b000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000058 CR3: 0000000001c11000 CR4: 00000000001407e0 Stack: ffff880117f3dcd0 ffff880117f78000 ffff88003f60c000 ffff880117f78000 ffff880117f78000 ffff88003f11a290 0000000000000000 ffff8800daf837b0 ffffffff81617707 ffff880117f78000 ffff88003f60c000 0000000000000013 Call Trace: [<ffffffff81617707>] usbhid_restart_ctrl_queue+0x87/0x140 [<ffffffff81617a88>] usbhid_submit_report+0x2c8/0x370 [<ffffffff81617b4a>] usbhid_request+0x1a/0x30 [<ffffffffa020edfb>] sensor_hub_set_feature+0x8b/0xd0 [hid_sensor_hub] [<ffffffffa02d9084>] hid_sensor_power_state+0x84/0x110 [hid_sensor_trigger] [<ffffffffa02d9129>] hid_sensor_data_rdy_trigger_set_state+0x19/0x20 [hid_sensor_trigger] [<ffffffffa034d5b7>] iio_triggered_buffer_predisable+0xa7/0xb0 [industrialio] [<ffffffffa034cc4a>] iio_disable_all_buffers+0x3a/0xc0 [industrialio] [<ffffffffa03487d3>] iio_device_unregister+0x53/0x80 [industrialio] [<ffffffffa026c06a>] hid_accel_3d_remove+0x2a/0x50 [hid_sensor_accel_3d] [<ffffffff814f433d>] platform_drv_remove+0x1d/0x40 [<ffffffff814f18bf>] __device_release_driver+0x7f/0xf0 [<ffffffff814f1955>] device_release_driver+0x25/0x40 [<ffffffff814f121c>] bus_remove_device+0x11c/0x1a0 [<ffffffff814ed7d6>] device_del+0x136/0x1e0 [<ffffffff81512190>] ? mfd_cell_disable+0x80/0x80 [<ffffffff814f41d1>] platform_device_del+0x21/0xc0 [<ffffffff814f4282>] platform_device_unregister+0x12/0x30 [<ffffffff815121d3>] mfd_remove_devices_fn+0x43/0x50 [<ffffffff814ed3e3>] device_for_each_child+0x43/0x70 [<ffffffff81512105>] mfd_remove_devices+0x25/0x30 [<ffffffffa020ebd7>] sensor_hub_remove+0x87/0x140 [hid_sensor_hub] [<ffffffff81607c5b>] hid_device_remove+0x6b/0xd0 [<ffffffff814f18bf>] __device_release_driver+0x7f/0xf0 [<ffffffff814f1955>] device_release_driver+0x25/0x40 [<ffffffff814f121c>] bus_remove_device+0x11c/0x1a0 [<ffffffff814ed7d6>] device_del+0x136/0x1e0 [<ffffffff81607d47>] hid_destroy_device+0x27/0x60 [<ffffffff81616972>] usbhid_disconnect+0x22/0x50 [<ffffffff81568597>] usb_unbind_interface+0x77/0x2b0 [<ffffffff814f18bf>] __device_release_driver+0x7f/0xf0 [<ffffffff814f1955>] device_release_driver+0x25/0x40 [<ffffffff814f121c>] bus_remove_device+0x11c/0x1a0 [<ffffffff814ed7d6>] device_del+0x136/0x1e0 [<ffffffff81565cd1>] usb_disable_device+0x91/0x2a0 [<ffffffff8155b046>] usb_disconnect+0x96/0x2e0 [<ffffffff8155d74a>] hub_thread+0xb5a/0x1840 Signed-off-by: Reyad Attiyat <reyad.attiyat@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* HID: usbhid: remove unneeded initialization of quirks_param[]Mathias Krause2014-06-101-1/+1
| | | | | | | | The quirks_param array is located in the BSS, no need to explicitly initialize it with NULL. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* HID: remove hid_output_raw_report transport implementationsBenjamin Tissoires2014-03-141-12/+0
| | | | | | | | | | Nobody calls hid_output_raw_report anymore, and nobody should. We can now remove the various implementation in the different transport drivers and the declarations. Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* HID: sony: do not rely on hid_output_raw_reportBenjamin Tissoires2014-03-141-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | hid_out_raw_report is going to be obsoleted as it is not part of the unified HID low level transport documentation (Documentation/hid/hid-transport.txt) To do so, we need to introduce two new quirks: * HID_QUIRK_NO_OUTPUT_REPORTS_ON_INTR_EP: this quirks prevents the transport driver to use the interrupt channel to send output report (and thus force to use HID_REQ_SET_REPORT command) * HID_QUIRK_SKIP_OUTPUT_REPORT_ID: this one forces usbhid to not include the report ID in the buffer it sends to the device through HID_REQ_SET_REPORT in case of an output report This also fixes a regression introduced in commit 3a75b24949a8 (HID: hidraw: replace hid_output_raw_report() calls by appropriates ones). The hidraw API was not able to communicate with the PS3 SixAxis controllers in USB mode. Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by: Antonio Ospite <ao2@ao2.it> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* HID: usbhid: change return error of usbhid_output_reportBenjamin Tissoires2014-02-171-1/+1
| | | | | | | | | If there is no urbout when sending a output report, ENOSYS (Function not implemented) is a better error than EIO (I/O error). Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* HID: remove hid_get_raw_report in struct hid_deviceBenjamin Tissoires2014-02-171-1/+0
| | | | | | | | | | dev->hid_get_raw_report(X) and hid_hw_raw_request(X, HID_REQ_GET_REPORT) are strictly equivalent. Switch the hid subsystem to the hid_hw notation and remove the field .hid_get_raw_report in struct hid_device. Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* HID: usbhid: remove duplicated codeBenjamin Tissoires2014-02-171-53/+11
| | | | | | | | Well, no use to keep twice the same code. Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* HID: Add transport-driver functions to the USB HID interface.Frank Praznik2014-01-291-0/+78
| | | | | | | | | Add raw_request, set_raw_report and output_report transport-driver functions to the USB HID driver. Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com> Acked-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
*---. Merge branches 'for-3.12/devm', 'for-3.12/i2c-hid', 'for-3.12/i2c-hid-dt', ↵Jiri Kosina2013-09-061-69/+14
|\ \ \ | | | | | | | | | | | | 'for-3.12/logitech', 'for-3.12/multitouch-win8', 'for-3.12/trasnport-driver-cleanup', 'for-3.12/uhid', 'for-3.12/upstream' and 'for-3.12/wiimote' into for-linus
| | | * HID: fix data access in implement()Jiri Kosina2013-07-221-3/+2
| |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implement() is setting bytes in LE data stream. In case the data is not aligned to 64bits, it reads past the allocated buffer. It doesn't really change any value there (it's properly bitmasked), but in case that this read past the boundary hits a page boundary, pagefault happens when accessing 64bits of 'x' in implement(), and kernel oopses. This happens much more often when numbered reports are in use, as the initial 8bit skip in the buffer makes the whole process work on values which are not aligned to 64bits. This problem dates back to attempts in 2005 and 2006 to make implement() and extract() as generic as possible, and even back then the problem was realized by Adam Kroperlin, but falsely assumed to be impossible to cause any harm: http://www.mail-archive.com/linux-usb-devel@lists.sourceforge.net/msg47690.html I have made several attempts at fixing it "on the spot" directly in implement(), but the results were horrible; the special casing for processing last 64bit chunk and switching to different math makes it unreadable mess. I therefore took a path to allocate a few bytes more which will never make it into final report, but are there as a cushion for all the 64bit math operations happening in implement() and extract(). All callers of hid_output_report() are converted at the same time to allocate the buffer by newly introduced hid_alloc_report_buf() helper. Bruno noticed that the whole raw_size test can be dropped as well, as hid_alloc_report_buf() makes sure that the buffer is always of a proper size. Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | * HID: usbhid: use generic hidinput_input_event()David Herrmann2013-07-311-71/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | HID core provides the same functionality as we do, so drop the custom hidinput_input_event() handler. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | * HID: usbhid: update LED fields unlockedDavid Herrmann2013-07-311-3/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Report fields can be updated from HID drivers unlocked via hid_set_field(). It is protected by input_lock in HID core so only a single input event is handled at a time. USBHID can thus update the field unlocked and doesn't conflict with any HID vendor/device drivers. Note, many HID drivers make heavy use of hid_set_field() in that way. But usbhid also schedules a work to gather multiple LED changes in a single report. Hence, we used to lock the LED field update so the work can read a consistent state. However, hid_set_field() only writes a single integer field, which is guaranteed to be allocated all the time. So the worst possible race-condition is a garbage read on the LED field. Therefore, there is no need to protect the update. In fact, the only thing that is prevented by locking hid_set_field(), is an LED update while the scheduled work currently writes an older LED update out. However, this means, a new work is scheduled directly when the old one is done writing the new state to the device. So we actually _win_ by not protecting the write and allowing the write to be combined with the current write. A new worker is still scheduled, but will not write any new state. So the LED will not blink unnecessarily on the device. Assume we have the LED set to 0. Two request come in which enable the LED and immediately disable it. The current situation with two CPUs would be: usb_hidinput_input_event() | hid_led() ---------------------------------+---------------------------------- spin_lock(&usbhid->lock); hid_set_field(1); spin_unlock(&usbhid->lock); schedule_work(...); spin_lock(&usbhid->lock); __usbhid_submit_report(..1..); spin_unlock(&usbhid->lock); spin_lock(&usbhid->lock); hid_set_field(0); spin_unlock(&usbhid->lock); schedule_work(...); spin_lock(&usbhid->lock); __usbhid_submit_report(..0..); spin_unlock(&usbhid->lock); With the locking removed, we _might_ end up with (look at the changed __usbhid_submit_report() parameters in the first try!): usb_hidinput_input_event() | hid_led() ---------------------------------+---------------------------------- hid_set_field(1); schedule_work(...); spin_lock(&usbhid->lock); hid_set_field(0); schedule_work(...); __usbhid_submit_report(..0..); spin_unlock(&usbhid->lock); ... next work ... spin_lock(&usbhid->lock); __usbhid_submit_report(..0..); spin_unlock(&usbhid->lock); As one can see, we no longer send the "LED ON" signal as it is disabled immediately afterwards and the following "LED OFF" request overwrites the pending "LED ON". It is important to note that hid_set_field() is not atomic, so we might also end up with any other value. But that doesn't matter either as we _always_ schedule the next work with a correct value and schedule_work() acts as memory barrier, anyways. So in the worst case, we run __usbhid_submit_report(..<garbage>..) in the first case and the following __usbhid_submit_report() will write the correct value. But LED states are booleans so any garbage will be converted to either 0 or 1 and the remote device will never see invalid requests. Why all this? It avoids any custom locking around hid_set_field() in usbhid and finally allows us to provide a generic hidinput_input_event() handler for all HID transport drivers. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| | * HID: usbhid: make usbhid_set_leds() staticDavid Herrmann2013-07-311-2/+1
| |/ |/| | | | | | | | | | | | | | | usbhid_set_leds() is only used inside of usbhid/hid-core.c so no need to export it. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * HID: do not init input reports for Win 8 multitouch devicesBenjamin Tissoires2013-08-271-3/+8
|/ | | | | | | | | | | | | | | | | Some multitouch screens do not like to be polled for input reports. However, the Win8 spec says that all touches should be sent during each report, making the initialization of reports unnecessary. The Win7 spec is less precise, so do not use this for those devices. Add the quirk HID_QUIRK_NO_INIT_INPUT_REPORTS so that we do not have to introduce a quirk for each problematic device. This quirk makes the driver behave the same way the Win 8 does. It actually retrieves the features, but not the inputs. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Tested-by: Srinivas Pandruvada<srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* Merge branch 'for-linus' of ↵Linus Torvalds2013-04-301-4/+31
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID updates from Jiri Kosina: - hid driver transport cleanup, finalizing the long-desired decoupling of core from transport layers, by Benjamin Tissoires and Henrik Rydberg - support for hybrid finger/pen multitouch HID devices, by Benjamin Tissoires - fix for long-standing issue in Logitech unifying driver sometimes not inializing properly due to device specifics, by Andrew de los Reyes - Wii remote driver updates to support 2nd generation of devices, by David Herrmann - support for Apple IR remote - roccat driver now supports new devices (Roccat Kone Pure, IskuFX), by Stefan Achatz - debugfs locking fixes in hid debug interface, by Jiri Kosina * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (43 commits) HID: protect hid_debug_list HID: debug: break out hid_dump_report() into hid-debug HID: Add PID for Japanese version of NE4K keyboard HID: hid-lg4ff add support for new version of DFGT wheel HID: icade: u16 which never < 0 HID: clarify Magic Mouse Kconfig description HID: appleir: add support for Apple ir devices HID: roccat: added media key support for Kone HID: hid-lenovo-tpkbd: remove doubled hid_get_drvdata HID: i2c-hid: fix length for set/get report in i2c hid HID: wiimote: parse reduced status reports HID: wiimote: add 2nd generation Wii Remote IDs HID: wiimote: use unique battery names HID: hidraw: warn if userspace headers are outdated HID: multitouch: force BTN_STYLUS for pen devices HID: multitouch: append " Pen" to the name of the stylus input HID: multitouch: add handling for pen in dual-sensors device HID: multitouch: change touch sensor detection in mt_input_configured() HID: multitouch: do not map usage from non used reports HID: multitouch: breaks out touch handling in specific functions ...
| * HID: ll_driver: Extend the interface with idle requestsBenjamin Tissoires2013-03-071-0/+15
| | | | | | | | | | | | | | | | | | | | | | Some drivers send the idle command directly to underlying device, creating an unwanted dependency on the underlying transport layer. This patch adds hid_hw_idle() to the interface, thereby removing usbhid from the lion share of the drivers. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * HID: use hid_hw_wait() instead of direct call to usbhidBenjamin Tissoires2013-02-251-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This removes most of the dependencies between hid drivers and usbhid. The patch was constructed by replacing all occurences of usbhid_wait_io() by its hid_hw_wait() counterpart. Then, drivers not requiring USB_HID anymore have their USB_HID dependency cleaned in the Kconfig file. As of today, few drivers are still requiring an explicit USB layer dependency: * ntrig (a patch is on its way) * multitouch (one patch following and another on its way) * lenovo tpkbd * roccat * sony The last three are two deeply using direct calls to the usb subsystem to be able to be cleaned right now. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * HID: use hid_hw_request() instead of direct call to usbhidBenjamin Tissoires2013-02-251-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This allows the hid drivers to be independent from the transport layer. The patch was constructed by replacing all occurences of usbhid_submit_report() by its hid_hw_request() counterpart. Then, drivers not requiring USB_HID anymore have their USB_HID dependency cleaned in the Kconfig file. Finally, few drivers still depends on USB_HID. Many of them are requiring the io wait callback. They are found in the next patch. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> For the sensor-hub part: Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
OpenPOWER on IntegriCloud