summaryrefslogtreecommitdiffstats
path: root/drivers/gpu
Commit message (Collapse)AuthorAgeFilesLines
* drm/amd/display: Support amdgpu "max bpc" connector property (v2)Nicholas Kazlauskas2018-11-152-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [Why] Many panels support more than 8bpc but some modes are unavailable while running at greater than 8bpc due to DP/HDMI bandwidth constraints. Support for more than 8bpc was added recently in the driver but it defaults to the maximum supported bpc - locking out these modes. This should be a user configurable option such that the user can select what bpc configuration they would like. [How] This patch adds support for getting and setting the amdgpu driver specific "max bpc" property on the connector. It also adds support for limiting the output bpc based on the property value. The default limitation is the lowest value in the range, 8bpc. This was the old value before the range was uncapped. This patch should be updated/replaced later once common drm support for max bpc lands. Bugzilla: https://bugs.freedesktop.org/108542 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201585 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200645 Fixes: e03fd3f300f6 ("drm/amd/display: Do not limit color depth to 8bpc") v2: rebase on upstream (Alex) Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/amdgpu: Add amdgpu "max bpc" connector property (v2)Nicholas Kazlauskas2018-11-152-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | [Why] Many panels support more than 8bpc but some modes are unavailable while running at greater than 8bpc due to DP/HDMI bandwidth constraints. Support for more than 8bpc was added recently in the driver but it defaults to the maximum supported bpc - locking out these modes. This should be a user configurable option such that the user can select what bpc configuration they would like. [How] This patch introduces the "max bpc" amdgpu driver specific connector property so the user can limit the maximum bpc. It ranges from 8 to 16. This doesn't directly set the preferred bpc for the panel since it follows Intel's existing driver conventions. This proprety should be removed once common drm support for max bpc lands. v2: rebase on upstream (Alex) Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* Merge branch 'drm-fixes-4.20' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie2018-11-165-31/+33
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | into drm-fixes Fixes for 4.20: - Fix for huge page handling that caused a GPUVM fault in some cases - Fix IH ring setup - Fix for xgmi aperture setup - Fix for watermark setup for SMU Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181114171853.2866-1-alexander.deucher@amd.com
| * drm/amdgpu: fix huge page handling on Vega10Christian König2018-11-131-8/+10
| | | | | | | | | | | | | | | | | | | | | | | | We accidentially set the huge flag on the parent instead of the childs. This caused some VM faults under memory pressure. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Tested-by: Samuel Pitoiset <samuel.pitoiset@gmail.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
| * drm/amd/pp: Fix truncated clock value when set watermarkRex Zhu2018-11-131-16/+16
| | | | | | | | | | | | | | | | | | | | | | | | the clk value should be tranferred to MHz first and then transfer to uint16. otherwise, the clock value will be truncated. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reported-by: Hersen Wu <hersenxs.wu@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
| * drm/amdgpu: fix bug with IH ring setupPhilip Yang2018-11-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | The bug limits the IH ring wptr address to 40bit. When the system memory is bigger than 1TB, the bus address is more than 40bit, this causes the interrupt cannot be handled and cleared correctly. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * drm/amdgpu: set system aperture to cover whole FB regionshaoyunl2018-11-122-6/+6
| | | | | | | | | | | | | | | | | | | | In XGMI configuration, the FB region covers vram region from peer device, adjust system aperture to cover all of them Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: shaoyunl <shaoyun.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* | Merge tag 'drm-misc-fixes-2018-11-14' of ↵Dave Airlie2018-11-169-82/+48
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Cross-subsystem: - omap: Instantiate dss children in omapdss instead of mach (Laurent) Other: - htmldocs build warning (Sean) - MST NULL deref fix (Stanislav) - omap: Various runtime ref gets on probe/bind (Laurent) - omap: Fix to the above dss children patch (Tony) Cc: Sean Paul <sean@poorly.run> Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Dave Airlie <airlied@redhat.com> From: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20181114204542.GA52569@art_vandelay
| * | drm/meson: venc: dmt mode must use encpJorge Ramirez-Ortiz2018-11-131-7/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | The video mode for DMT is only populated to support encp. Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez.ortiz@gmail.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/1542048069-22603-1-git-send-email-jramirez@baylibre.com
| * | drm/omap: dsi: Fix missing of_platform_depopulate()Tony Lindgren2018-11-121-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We're missing a call to of_platform_depopulate() on errors for dsi. Looks like dss is already doing this. Signed-off-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181106152802.38599-1-tony@atomide.com
| * | drm/omap: Move DISPC runtime PM handling to omapdrmLaurent Pinchart2018-11-125-68/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The internal encoders (DSI, HDMI4, HDMI5 and VENC) runtime PM handlers attempt to manage the runtime PM state of the connected DISPC, based on the rationale that the DISPC providing data to the encoders requires ensuring that the display is active whenever the encoders are active. While the DISPC provides data to the encoders, it doesn't as such constitute a resource that encoders require in order to be taken out of suspend, contrary to for instance a functional clock or a power supply. Encoders registers can be accessed without the DISPC being active, and while the encoders will not output any video stream without being fed by the DISPC, the DISPC PM state doesn't influence the encoders PM state. For this reason the DISPC PM state is better managed from the omapdrm driver, in the CRTC enable and disable operations. This allows the encoders PM state to be handled separately from the DISPC, and in particular at times when the DISPC may not be available (for instance at probe due to the DSS probe being deferred, or at remove time du to the DISPC being already removed). Fixes: edb715dffdee ("drm/omap: dss: dsi: Move initialization code from bind to probe") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181110111654.4387-5-laurent.pinchart@ideasonboard.com
| * | drm/omap: dsi: Ensure the device is active during probeLaurent Pinchart2018-11-121-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The probe function performs hardware access to read the number of supported data lanes from a configuration register and thus requires the device to be active. Ensure this by surrounding the access with dsi_runtime_get() and dsi_runtime_put() calls. Fixes: edb715dffdee ("drm/omap: dss: dsi: Move initialization code from bind to probe") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181110111654.4387-4-laurent.pinchart@ideasonboard.com
| * | drm/omap: hdmi4: Ensure the device is active during bindLaurent Pinchart2018-11-121-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The bind function performs hardware access (in hdmi4_cec_init()) and thus requires the device to be active. Ensure this by surrounding the bind function by hdmi_runtime_get() and hdmi_runtime_put() calls. Fixes: 27d624527d99 ("drm/omap: dss: Acquire next dssdev at probe time") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181110111654.4387-3-laurent.pinchart@ideasonboard.com
| * | drm/omap: Populate DSS children in omapdss driverLaurent Pinchart2018-11-121-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The DSS DT node contains children that describe the DSS components (DISPC and internal encoders). Each of those components is handled by a platform driver, and thus needs to be backed by a platform device. The corresponding platform devices are created in mach-omap2 code by a call to of_platform_populate(). While this approach has worked so far, it doesn't model the hardware architecture very well, as it creates child devices before the parent is ready to handle them. This would be akin to creating I2C slaves before the I2C master is available. The task can be easily performed in the omapdss driver code instead, simplifying mach-omap2 code. We however can't remove the mach-omap2 code completely as the omap2fb driver still depends on it, but we can move it to the omap2fb-specific section, where it can stay until the omap2fb driver gets removed. This has the added benefit of not allowing DSS components to probe before the DSS itself, which led to runtime PM issues when the DSS probe is deferred. Fixes: 27d624527d99 ("drm/omap: dss: Acquire next dssdev at probe time") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181110111654.4387-2-laurent.pinchart@ideasonboard.com
| * | drm/dp_mst: Check if primary mstb is nullStanislav Lisovskiy2018-11-091-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Unfortunately drm_dp_get_mst_branch_device which is called from both drm_dp_mst_handle_down_rep and drm_dp_mst_handle_up_rep seem to rely on that mgr->mst_primary is not NULL, which seem to be wrong as it can be cleared with simultaneous mode set, if probing fails or in other case. mgr->lock mutex doesn't protect against that as it might just get assigned to NULL right before, not simultaneously. There are currently bugs 107738, 108616 bugs which crash in drm_dp_get_mst_branch_device, caused by this issue. v2: Refactored the code, as it was nicely noticed. Fixed Bugzilla bug numbers(second was 108616, but not 108816) and added links. [changed title and added stable cc] Signed-off-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Cc: stable@vger.kernel.org Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108616 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107738 Link: https://patchwork.freedesktop.org/patch/msgid/20181109090012.24438-1-stanislav.lisovskiy@intel.com
| * | drm: Fix htmldocs warnings in drm_fourcc.cSean Paul2018-11-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a description for dev and remove the excess one for native. Fixes the following warnings: ../drivers/gpu/drm/drm_fourcc.c:112: warning: Function parameter or member 'dev' not described in 'drm_driver_legacy_fb_format' ../drivers/gpu/drm/drm_fourcc.c:112: warning: Excess function parameter 'native' description in 'drm_driver_legacy_fb_format' Fixes: 059b5eb5d955 ("drm: move native byte order quirk to new drm_driver_legacy_fb_format function") Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20181107205546.216088-1-sean@poorly.run
* | | Merge tag 'drm-fixes-2018-11-11' of git://anongit.freedesktop.org/drm/drmLinus Torvalds2018-11-1042-288/+249
|\ \ \ | | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull drm fixes from Dave Airlie: "drm: i915, amdgpu, sun4i, exynos and etnaviv fixes: - amdgpu has some display fixes, KFD ioctl fixes and a Vega20 bios interaction fix. - sun4i has some NULL checks added - i915 has a 32-bit system fix, LPE audio oops, and HDMI2.0 clock fixes. - Exynos has a 3 regression fixes (one frame counter, fbdev missing, dsi->panel check) - Etnaviv has a single fencing fix for GPU recovery" * tag 'drm-fixes-2018-11-11' of git://anongit.freedesktop.org/drm/drm: (39 commits) drm/amd/amdgpu/dm: Fix dm_dp_create_fake_mst_encoder() drm/amd/display: Drop reusing drm connector for MST drm/amd/display: Cleanup MST non-atomic code workaround drm/amd/powerplay: always use fast UCLK switching when UCLK DPM enabled drm/amd/powerplay: set a default fclk/gfxclk ratio drm/amdgpu/display/dce11: only enable FBC when selected drm/amdgpu/display/dm: handle FBC dc feature parameter drm/amdgpu/display/dc: add FBC to dc_config drm/amdgpu: add DC feature mask module parameter drm/amdgpu/display: check if fbc is available in set_static_screen_control (v2) drm/amdgpu/vega20: add CLK base offset drm/amd/display: Stop leaking planes drm/amd/display: Fix misleading buffer information Revert "drm/amd/display: set backlight level limit to 1" drm/amd: Update atom_smu_info_v3_3 structure drm/i915: Fix ilk+ watermarks when disabling pipes drm/sun4i: tcon: prevent tcon->panel dereference if NULL drm/sun4i: tcon: fix check of tcon->panel null pointer drm/i915: Don't oops during modeset shutdown after lpe audio deinit drm/i915: Mark pin flags as u64 ...
| * | Merge branch 'drm-fixes-4.20' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie2018-11-1116-121/+84
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | into drm-fixes Fixes for 4.20: - DC MST fixes - DC FBC fix - Vega20 updates to support the latest vbios - KFD type fixes for ioctl headers Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181108035551.2904-1-alexander.deucher@amd.com
| | * | drm/amd/amdgpu/dm: Fix dm_dp_create_fake_mst_encoder()Lyude Paul2018-11-071-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [why] Removing connector reusage from DM to match the rest of the tree ended up revealing an issue that was surprisingly subtle. The original amdgpu code for DC that was submitted appears to have left a chunk in dm_dp_create_fake_mst_encoder() that tries to find a "master encoder", the likes of which isn't actually used or stored anywhere. It does so at the wrong time as well by trying to access parts of the drm_connector from the encoder init before it's actually been initialized. This results in a NULL pointer deref on MST hotplugs: [ 160.696613] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [ 160.697234] PGD 0 P4D 0 [ 160.697814] Oops: 0010 [#1] SMP PTI [ 160.698430] CPU: 2 PID: 64 Comm: kworker/2:1 Kdump: loaded Tainted: G O 4.19.0Lyude-Test+ #2 [ 160.699020] Hardware name: HP HP ZBook 15 G4/8275, BIOS P70 Ver. 01.22 05/17/2018 [ 160.699672] Workqueue: events_long drm_dp_mst_link_probe_work [drm_kms_helper] [ 160.700322] RIP: 0010: (null) [ 160.700920] Code: Bad RIP value. [ 160.701541] RSP: 0018:ffffc9000029fc78 EFLAGS: 00010206 [ 160.702183] RAX: 0000000000000000 RBX: ffff8804440ed468 RCX: ffff8804440e9158 [ 160.702778] RDX: 0000000000000000 RSI: ffff8804556c5700 RDI: ffff8804440ed000 [ 160.703408] RBP: ffff880458e21800 R08: 0000000000000002 R09: 000000005fca0a25 [ 160.704002] R10: ffff88045a077a3d R11: ffff88045a077a3c R12: ffff8804440ed000 [ 160.704614] R13: ffff880458e21800 R14: ffff8804440e9000 R15: ffff8804440e9000 [ 160.705260] FS: 0000000000000000(0000) GS:ffff88045f280000(0000) knlGS:0000000000000000 [ 160.705854] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 160.706478] CR2: ffffffffffffffd6 CR3: 000000000200a001 CR4: 00000000003606e0 [ 160.707124] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 160.707724] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 160.708372] Call Trace: [ 160.708998] ? dm_dp_add_mst_connector+0xed/0x1d0 [amdgpu] [ 160.709625] ? drm_dp_add_port+0x2fa/0x470 [drm_kms_helper] [ 160.710284] ? wake_up_q+0x54/0x70 [ 160.710877] ? __mutex_unlock_slowpath.isra.18+0xb3/0x110 [ 160.711512] ? drm_dp_dpcd_access+0xe7/0x110 [drm_kms_helper] [ 160.712161] ? drm_dp_send_link_address+0x155/0x1e0 [drm_kms_helper] [ 160.712762] ? drm_dp_check_and_send_link_address+0xa3/0xd0 [drm_kms_helper] [ 160.713408] ? drm_dp_mst_link_probe_work+0x4b/0x80 [drm_kms_helper] [ 160.714013] ? process_one_work+0x1a1/0x3a0 [ 160.714667] ? worker_thread+0x30/0x380 [ 160.715326] ? wq_update_unbound_numa+0x10/0x10 [ 160.715939] ? kthread+0x112/0x130 [ 160.716591] ? kthread_create_worker_on_cpu+0x70/0x70 [ 160.717262] ? ret_from_fork+0x35/0x40 [ 160.717886] Modules linked in: amdgpu(O) vfat fat snd_hda_codec_generic joydev i915 chash gpu_sched ttm i2c_algo_bit drm_kms_helper snd_hda_codec_hdmi hp_wmi syscopyarea iTCO_wdt sysfillrect sparse_keymap sysimgblt fb_sys_fops snd_hda_intel usbhid wmi_bmof drm snd_hda_codec btusb snd_hda_core intel_rapl btrtl x86_pkg_temp_thermal btbcm btintel coretemp snd_pcm crc32_pclmul bluetooth psmouse snd_timer snd pcspkr i2c_i801 mei_me i2c_core soundcore mei tpm_tis wmi tpm_tis_core hp_accel ecdh_generic lis3lv02d tpm video rfkill acpi_pad input_polldev hp_wireless pcc_cpufreq crc32c_intel serio_raw tg3 xhci_pci xhci_hcd [last unloaded: amdgpu] [ 160.720141] CR2: 0000000000000000 Somehow the connector reusage DM was using for MST connectors managed to paper over this issue entirely; hence why this was never caught until now. [how] Since this code isn't used anywhere and seems useless anyway, we can just drop it entirely. This appears to fix the issue on my HP ZBook with an AMD WX4150. Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | * | drm/amd/display: Drop reusing drm connector for MSTJerry (Fangzhi) Zuo2018-11-072-35/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [why] It is not safe to keep existing connector while entire topology has been removed. Could lead potential impact to uapi. Entirely unregister all the connectors on the topology, and use a new set of connectors when the topology is plugged back on. [How] Remove the drm connector entirely each time when the corresponding MST topology is gone. When hotunplug a connector (e.g., DP2) 1. Remove connector from userspace. 2. Drop it's reference. When hotplug back on: 1. Detect new topology, and create new connectors. 2. Notify userspace with sysfs hotplug event. 3. Reprobe new connectors, and reassign CRTC from old (e.g., DP2) to new (e.g., DP3) connector. Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | * | drm/amd/display: Cleanup MST non-atomic code workaroundJerry (Fangzhi) Zuo2018-11-073-46/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [why] It is not correct to touch aconnector within atomic_check. [How] It was added as workaround before, and no longer needed. Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | * | drm/amd/powerplay: always use fast UCLK switching when UCLK DPM enabledEvan Quan2018-11-071-20/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With UCLK DPM enabled, slow switching is not supported any more. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | * | drm/amd/powerplay: set a default fclk/gfxclk ratioEvan Quan2018-11-073-1/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Otherwise big gap between these two clocks may causes some hangs. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | * | drm/amdgpu/display/dce11: only enable FBC when selectedAlex Deucher2018-11-061-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Causes a black screen on a Stoney laptop. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=108577 Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | * | drm/amdgpu/display/dm: handle FBC dc feature parameterAlex Deucher2018-11-061-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Set the dc_config properly when the option is enabled. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | * | drm/amdgpu/display/dc: add FBC to dc_configAlex Deucher2018-11-061-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add FBC to the list of features that can be enabled from the DM. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | * | drm/amdgpu: add DC feature mask module parameterAlex Deucher2018-11-063-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Similar to ppfeaturemask. Allows you to selectively enable/disable DC features. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | * | drm/amdgpu/display: check if fbc is available in set_static_screen_control (v2)Alex Deucher2018-11-061-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The value is dependent on whether fbc is available. v2: only check if num_pipes is valid Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | * | drm/amdgpu/vega20: add CLK base offsetAlex Deucher2018-11-061-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | In case we need to access CLK registers. Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | * | drm/amd/display: Stop leaking planesHarry Wentland2018-11-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [Why] drm_plane_cleanup does not free the plane. [How] Call drm_primary_helper_destroy which will also free the plane. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | * | drm/amd/display: Fix misleading buffer informationShaokun Zhang2018-11-061-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | RETIMER_REDRIVER_INFO shows the buffer as a decimal value with a '0x' prefix, which is somewhat misleading. Fix it to print hexadecimal, as was intended. Fixes: 2f14bc89("drm/amd/display: add retimer log for HWQ tuning use.") Cc: Charlene Liu <charlene.liu@amd.com> Cc: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | * | Revert "drm/amd/display: set backlight level limit to 1"Alex Deucher2018-11-061-7/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 0cafc82fae41531b0162150f9a97f2c74f97118f. This breaks some apps that assume 0 is minimum brightness. Revert for 4.20. This is fixed properly for drm-next/4.21 in: "drm/amd: Don't fail on backlight = 0" However, that patch depends on more extensive changes to the backlight interface which are too invasive for -fixes. Fixes: Bugzilla: https://bugs.freedesktop.org/108668 Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| | * | drm/amd: Update atom_smu_info_v3_3 structureLeo Li2018-11-061-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Mainly adding the WAFL spread spectrum info, for adjusting display clocks when XGMI is enabled. Signed-off-by: Leo Li <sunpeng.li@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
| * | | Merge tag 'drm-misc-fixes-2018-11-07' of ↵Dave Airlie2018-11-113-6/+7
| |\ \ \ | | | |/ | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://anongit.freedesktop.org/drm/drm-misc into drm-fixes - sun4i: tcon->panel NULL deref protections (Giulio) Cc: Giulio Benetti <giulio.benetti@micronovasrl.com> Signed-off-by: Dave Airlie <airlied@redhat.com> From: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20181107205051.GA27823@art_vandelay
| | * | drm/sun4i: tcon: prevent tcon->panel dereference if NULLGiulio Benetti2018-11-061-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If tcon->panel pointer is NULL, trying to dereference from it (i.e. tcon->panel->connector) will cause a null pointer dereference. Add tcon->panel null pointer check before calling sun4i_tcon0_mode_set_dithering(). Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com> Fixes: f11adcecbd5f ("drm/sun4i: tcon: Add dithering support for RGB565/RGB666 LCD panels") Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181005215951.99003-2-giulio.benetti@micronovasrl.com
| | * | drm/sun4i: tcon: fix check of tcon->panel null pointerGiulio Benetti2018-11-063-5/+5
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since tcon->panel is a pointer returned by of_drm_find_panel() need to check if it is not NULL, hence a valid pointer. IS_ERR() instead checks return error values, not NULL pointers. Substitute "if (!IS_ERR(tcon->panel))" with "if (tcon->panel)". Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181005215951.99003-1-giulio.benetti@micronovasrl.com
| * | Merge tag 'drm-intel-fixes-2018-11-08' of ↵Dave Airlie2018-11-1117-135/+145
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://anongit.freedesktop.org/drm/drm-intel into drm-fixes Bugzilla #108282 fixed: Avoid graphics corruption on 32-bit systems for Mesa 18.2.x Avoid OOPS on LPE audio deinit. Remove two unused W/As. Fix to correct HDMI 2.0 audio clock modes to spec. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181108134508.GA28466@jlahtine-desk.ger.corp.intel.com
| | * \ Merge tag 'gvt-fixes-2018-11-07' of https://github.com/intel/gvt-linux into ↵Joonas Lahtinen2018-11-074-64/+70
| | |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | drm-intel-fixes gvt-fixes-2018-11-07 - Fix invalidate of old ggtt entry (Hang) - Fix partial ggtt entry update in any order (Hang) - Fix one mask setting for chicken reg (Xinyun) - Fix eDP warning in guest (Longhe) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> From: Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181107023137.GO25194@zhen-hp.sh.intel.com
| | | * | drm/i915/gvt: Handle values of EDP_PSR_IMR and EDP_PSR_IIRLonghe Zheng2018-10-311-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | GVT-g only simulates DP port for guest and leaves EDP_PSR_IMR and EDP_PSR_IIR registers as default MMIO read/write. So guest won't get expected initial values of these registers when initializing the gpu driver, which results in following warning and logs. -------- Interrupt register 0x64838 is not zero: 0xffffffff WARNING: CPU: 1 PID: 157 at drivers/gpu/drm/i915/i915_irq.c:177 gen3_assert_iir_is_zero+0x38/0xa0 Call Trace: gen8_de_irq_postinstall+0xa7/0x400 gen8_irq_postinstall+0x27/0x80 drm_irq_install+0xbc/0x140 i915_driver_load+0xa9d/0xd50 -------- Because GVT-g does not handle EDP(embedded DP) simulation for guests, always set EDP_PSR_IMR and EDP_PSR_IIR to value 0. Signed-off-by: Longhe Zheng <longhe.zheng@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
| | | * | drm/i915/gvt: correct mask setting for CSFE_CHICKEN1Xinyun Liu2018-10-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CSFE_CHICKEN1(0x20d4) needs access with mask. This is caught in AcrnGT conformance check test: [drm:intel_gvt_vgpu_conformance_check] *ERROR* gvt: vgpu1 unconformance mmio 0x20d4:0x40004,0x4 Signed-off-by: Xinyun Liu <xinyun.liu@intel.com> Signed-off-by: Zhi Wang <zhi.a.wang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
| | | * | drm/i915/gvt: support inconsecutive partial gtt entry writeHang Yuan2018-10-312-56/+60
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously we assumed two 4-byte writes to the same PTE coming in sequence. But recently we observed inconsecutive partial write happening as well. So this patch enhances the previous solution. It now uses a list to save more partial writes. If one partial write can be combined with another one in the list to construct a full PTE, update its shadow entry. Otherwise, save the partial write in the list. v2: invalidate old entry and flush ggtt (Zhenyu) v3: split old ggtt page unmap to another patch (Zhenyu) v4: refine codes (Zhenyu) Signed-off-by: Hang Yuan <hang.yuan@linux.intel.com> Cc: Yan Zhao <yan.y.zhao@intel.com> Cc: Xiaolin Zhang <xiaolin.zhang@intel.com> Cc: Zhenyu Wang <zhenyu.z.wang@intel.com> Reviewed-by: Xiaolin Zhang <xiaolin.zhang@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
| | | * | drm/i915/gvt: invalidate old ggtt page when update ggtt entryHang Yuan2018-10-081-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously only cancelled dma map of a ggtt page when the ggtt entry was cleared. This patch will cancel dma map of an old ggtt page as well when the ggtt entry is updated with new page address. Fixes: 7598e8700e9a(drm/i915/gvt: Missed to cancel dma map for ggtt entries) Signed-off-by: Hang Yuan <hang.yuan@linux.intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
| | * | | drm/i915: Fix ilk+ watermarks when disabling pipesVille Syrjälä2018-11-061-11/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We're no longer programming any watermarks when we're disabling a pipe. That means ilk_wm_merge() & co. will keep considering the any pipe that is getting disabled as still enabled. Thus we either get no LP1+ watermakrs (ilk-ivb), or we get suboptimal ones (hsw-bdw). This seems to have been broken by commit b6b178a77210 ("drm/i915: Calculate ironlake intermediate watermarks correctly, v2."). Before that we apparently had some difference between the intermediate and optimal watermarks and so we would program the optiomal ones. Now intermediate and optimal are identical for disabled pipes and so we don't program either. Fix this by programming the intermediate watermarks even for disabled pipes. We were already doing that for skl+. We'll leave out gmch platforms for now since those do the merging in a different manner and should work as is. We'll want to unify this eventually, but play it safe for now and just put in a FIXME. Cc: stable@vger.kernel.org Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Fixes: b6b178a77210 ("drm/i915: Calculate ironlake intermediate watermarks correctly, v2.") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181025130536.29024-1-ville.syrjala@linux.intel.com Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #irc (cherry picked from commit a748faea3bfd7fd1d1485bc1c426c7d460cc6503) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
| | * | | drm/i915: Don't oops during modeset shutdown after lpe audio deinitVille Syrjälä2018-11-061-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We deinit the lpe audio device before we call drm_atomic_helper_shutdown(), which means the platform device may already be gone when it comes time to shut down the crtc. As we don't know when the last reference to the platform device gets dropped by the audio driver we can't assume that the device and its data are still around when turning off the crtc. Mark the platform device as gone as soon as we do the audio deinit. Cc: stable@vger.kernel.org Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181105194604.6994-1-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (cherry picked from commit f45a7977d1140c11f334e01a9f77177ed68e3bfa) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
| | * | | drm/i915: Mark pin flags as u64Chris Wilson2018-11-061-14/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since the flags are being used to operate on a u64 variable, they too need to be marked as such so that the inverses are full width (and not zero extended on 32b kernels and bdw+). Reported-by: Sergii Romantsov <sergii.romantsov@globallogic.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181102161232.17742-2-chris@chris-wilson.co.uk (cherry picked from commit 83b466b1dc5f0b4d33f0a901e8b00197a8f3582d) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
| | * | | drm/i915/icl: Fix the macros for DFLEXDPMLE register bitsManasi Navare2018-11-061-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes the macros used for defining the DFLEXDPMLE register bit fields. This accounts for changes in the spec. Fixes: a2bc69a1a9d6 ("drm/i915/icl: Add register definition for DFLEXDPMLE") Cc: Animesh Manna <animesh.manna@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Jose Roberto de Souza <jose.souza@intel.com> Cc: <stable@vger.kernel.org> # v4.19+ Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181023191248.26418-1-manasi.d.navare@intel.com (cherry picked from commit b4335ec0a3ee6229a570755f8fb95dc8a7c694f2) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
| | * | | drm/i915: Fix error handling for the NV12 fb dimensions checkVille Syrjälä2018-11-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Let's not leak obj->framebuffer_references when we decide that the framebuffer domensions are not suitable for NV12. Cc: stable@vger.kernel.org Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Vidya Srinivas <vidya.srinivas@intel.com> Fixes: e44134f2673c ("drm/i915: Add NV12 support to intel_framebuffer_init") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181029140031.11765-1-ville.syrjala@linux.intel.com Reviewed-by: Matt Roper <matthew.d.roper@intel.com> (cherry picked from commit 3b90946fcb6f13b65888c380461793a9dea9d1f4) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
| | * | | drm/i915: Fix VIDEO_DIP_CTL bit shiftsDhinakaran Pandiyan2018-11-061-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The shifts for VSC_SELECT bits are wrong, fix it. Good thing is the definitions are unused. v2: Moves definitions in another patch (Manasi) Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Fixes: 7af2be6d54d4 ("drm/i915/icl: Add VIDEO_DIP registers") Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181005185643.31660-1-dhinakaran.pandiyan@intel.com (cherry picked from commit 09209662618f9fdc38b8d4da39040c8829fd2d57) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
| | * | | drm/i915/glk: Remove 99% limitation.Rodrigo Vivi2018-11-061-16/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While checking the opportunity to add a display_gen check to allow glk and cnl to be on same bucket I noticed these FIXME cases here. So I got the confirmation from HW architect that we actually never needed this workaround. "GLK supports 2 pixel per clock, so pixel clock can be up to 2 * cdclk." So, this reverts commit 97f55ca5b662 ("drm/i915/glk: limit pixel clock to 99% of cdclk workaround") Fixes: 97f55ca5b662 ("drm/i915/glk: limit pixel clock to 99% of cdclk workaround") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Madhav Chauhan <madhav.chauhan@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Clinton Taylor <clinton.a.taylor@intel.com> Cc: Arthur J Runyan <arthur.j.runyan@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181026005636.22274-1-rodrigo.vivi@intel.com (cherry picked from commit 42882336e62aab00278114392a16374f272a0c99) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
| | * | | drm/i915: Compare user's 64b GTT offset even on 32bChris Wilson2018-11-063-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Beware mixing unsigned long constants and 64b values, as on 32b the constant will be zero extended and discard the high 32b when used as a mask! Reported-by: Sergii Romantsov <sergii.romantsov@globallogic.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108282 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: stable@vger.kernel.org Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181025091823.20571-2-chris@chris-wilson.co.uk (cherry picked from commit 6fc4e48f9ed46e9adff236a0c350074aafa3b7fa) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
OpenPOWER on IntegriCloud