summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/radeon/radeon_device.c
Commit message (Collapse)AuthorAgeFilesLines
* drm/radeon: add PX quirk for Asus K73TKNico Sneck2018-04-111-0/+4
| | | | | | | | With this the dGPU turns on correctly. Signed-off-by: Nico Sneck <nicosneck@hotmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
* drm/radeon: insist on 32-bit DMA for Cedar on PPC64/PPC64LEBen Crocker2018-02-261-0/+4
| | | | | | | | | | | | | | | | | | | | | In radeon_device_init, set the need_dma32 flag for Cedar chips (e.g. FirePro 2270). This fixes, or at least works around, a bug on PowerPC exposed by last year's commits 8e3f1b1d8255105f31556aacf8aeb6071b00d469 (Russell Currey) and 253fd51e2f533552ae35a0c661705da6c4842c1b (Alistair Popple) which enabled the 64-bit DMA iommu bypass. This caused the device to freeze, in some cases unrecoverably, and is the subject of several bug reports internal to Red Hat. Signed-off-by: Ben Crocker <bcrocker@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
* drm/radeon: only enable swiotlb path when need v2Chunming Zhou2018-02-131-0/+2
| | | | | | | | | | | | | swiotlb expands our card accessing range, but its path always is slower than ttm pool allocation. So add condition to use it. v2: move a bit later Signed-off-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Monk Liu <monk.liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180209024410.1469-3-david1.zhou@amd.com
* Revert "drm/radeon: Report doorbell configuration to amdkfd"Michel Dänzer2017-12-201-31/+0
| | | | | | | | | This reverts commit ebff8453d3a57a2405c4d96d9f9c4f4acc7d4d79. Unused since amdkfd is no longer supported with radeon. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Michel Dänzer <michel@daenzer.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* Revert "drm/radeon: adding synchronization for GRBM GFX"Michel Dänzer2017-12-201-1/+0
| | | | | | | | | This reverts commit 1c0a46255f8d7daf5b601668836e185fd1294e94. Not needed anymore, since amdkfd is no longer supported with radeon. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Michel Dänzer <michel@daenzer.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/radeon: disable hard reset in hibernate for APUsAlex Deucher2017-09-151-1/+1
| | | | | | | | | Fixes a hibernation regression on APUs. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=191571 Fixes: 274ad65c9d02bdc (drm/radeon: hard reset r600 and newer GPU when hibernating.) Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
* Merge tag 'pci-v4.13-changes' of ↵Linus Torvalds2017-07-081-11/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - add sysfs max_link_speed/width, current_link_speed/width (Wong Vee Khee) - make host bridge IRQ mapping much more generic (Matthew Minter, Lorenzo Pieralisi) - convert most drivers to pci_scan_root_bus_bridge() (Lorenzo Pieralisi) - mutex sriov_configure() (Jakub Kicinski) - mutex pci_error_handlers callbacks (Christoph Hellwig) - split ->reset_notify() into ->reset_prepare()/reset_done() (Christoph Hellwig) - support multiple PCIe portdrv interrupts for MSI as well as MSI-X (Gabriele Paoloni) - allocate MSI/MSI-X vector for Downstream Port Containment (Gabriele Paoloni) - fix MSI IRQ affinity pre/post/min_vecs issue (Michael Hernandez) - test INTx masking during enumeration, not at run-time (Piotr Gregor) - avoid using device_may_wakeup() for runtime PM (Rafael J. Wysocki) - restore the status of PCI devices across hibernation (Chen Yu) - keep parent resources that start at 0x0 (Ard Biesheuvel) - enable ECRC only if device supports it (Bjorn Helgaas) - restore PRI and PASID state after Function-Level Reset (CQ Tang) - skip DPC event if device is not present (Keith Busch) - check domain when matching SMBIOS info (Sujith Pandel) - mark Intel XXV710 NIC INTx masking as broken (Alex Williamson) - avoid AMD SB7xx EHCI USB wakeup defect (Kai-Heng Feng) - work around long-standing Macbook Pro poweroff issue (Bjorn Helgaas) - add Switchtec "running" status flag (Logan Gunthorpe) - fix dra7xx incorrect RW1C IRQ register usage (Arvind Yadav) - modify xilinx-nwl IRQ chip for legacy interrupts (Bharat Kumar Gogada) - move VMD SRCU cleanup after bus, child device removal (Jon Derrick) - add Faraday clock handling (Linus Walleij) - configure Rockchip MPS and reorganize (Shawn Lin) - limit Qualcomm TLP size to 2K (hardware issue) (Srinivas Kandagatla) - support Tegra MSI 64-bit addressing (Thierry Reding) - use Rockchip normal (not privileged) register bank (Shawn Lin) - add HiSilicon Kirin SoC PCIe controller driver (Xiaowei Song) - add Sigma Designs Tango SMP8759 PCIe controller driver (Marc Gonzalez) - add MediaTek PCIe host controller support (Ryder Lee) - add Qualcomm IPQ4019 support (John Crispin) - add HyperV vPCI protocol v1.2 support (Jork Loeser) - add i.MX6 regulator support (Quentin Schulz) * tag 'pci-v4.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (113 commits) PCI: tango: Add Sigma Designs Tango SMP8759 PCIe host bridge support PCI: Add DT binding for Sigma Designs Tango PCIe controller PCI: rockchip: Use normal register bank for config accessors dt-bindings: PCI: Add documentation for MediaTek PCIe PCI: Remove __pci_dev_reset() and pci_dev_reset() PCI: Split ->reset_notify() method into ->reset_prepare() and ->reset_done() PCI: xilinx: Make of_device_ids const PCI: xilinx-nwl: Modify IRQ chip for legacy interrupts PCI: vmd: Move SRCU cleanup after bus, child device removal PCI: vmd: Correct comment: VMD domains start at 0x10000, not 0x1000 PCI: versatile: Add local struct device pointers PCI: tegra: Do not allocate MSI target memory PCI: tegra: Support MSI 64-bit addressing PCI: rockchip: Use local struct device pointer consistently PCI: rockchip: Check for clk_prepare_enable() errors during resume MAINTAINERS: Remove Wenrui Li as Rockchip PCIe driver maintainer PCI: rockchip: Configure RC's MPS setting PCI: rockchip: Reconfigure configuration space header type PCI: rockchip: Split out rockchip_pcie_cfg_configuration_accesses() PCI: rockchip: Move configuration accesses into rockchip_pcie_cfg_atu() ...
| * drm/radeon: make MacBook Pro d3_delay quirk more genericBjorn Helgaas2017-06-301-11/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The PCI Power Management Spec, r1.2, sec 5.6.1, requires a 10 millisecond delay when powering on a device, i.e., transitioning from state D3hot to D0. Apparently some devices require more time, and d1f9809ed131 ("drm/radeon: add quirk for d3 delay during switcheroo poweron for apple macbooks") added an additional delay for the Radeon device in a MacBook Pro. 4807c5a8a0c8 ("drm/radeon: add a PX quirk list") made the affected device more explicit. Add a generic PCI quirk to increase the d3_delay. This means we will use the additional delay for *all* wakeups from D3, not just those initiated by radeon_switcheroo_set_state(). Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andreas Boll <andreas.boll.dev@gmail.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> CC: Maarten Lankhorst <maarten.lankhorst@canonical.com>
* | drm/radeon: add a PX quirk for another K53TK variantAlex Deucher2017-06-201-0/+4
|/ | | | | | | | | Disable PX on these systems. bug: https://bugs.freedesktop.org/show_bug.cgi?id=101491 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* Merge tag 'drm-misc-next-2017-03-31' of ↵Dave Airlie2017-04-031-2/+5
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://anongit.freedesktop.org/git/drm-misc into drm-next drm-misc for 4.12: Core: - Removed some fb subsampling dimension checks from core (Ville) - Some MST slot cleanup (Dhinakaran) - Extracted drm_debugfs.h & drm_ioctl.h from drmP.h (Daniel) - Added drm_atomic_helper_shutdown() to compliment suspend/resume counterparts (Daniel) - Pipe context through legacy modeset to remove legacy_backoff nasties (Daniel) - Cleanups around vblank as well as allowing lockless counter reads (Chris W.) - VGA Switcheroo added to MAINTAINERS with Lukas Wunner as reviewer (Lukas) Drivers: - Enhancements to rockchip driver probe (Jeffy) and dsi (Chris Z.) - Thunderbolt external GPU awareness added (Lukas) * tag 'drm-misc-next-2017-03-31' of git://anongit.freedesktop.org/git/drm-misc: (63 commits) apple-gmux: Don't switch external DP port on 2011+ MacBook Pros drm/nouveau: Don't register Thunderbolt eGPU with vga_switcheroo drm/amdgpu: Don't register Thunderbolt eGPU with vga_switcheroo drm/radeon: Don't register Thunderbolt eGPU with vga_switcheroo PCI: Recognize Thunderbolt devices MAINTAINERS: Add Lukas Wunner as reviewer for vga_switcheroo drm: Fix locking gotcha in page_flip ioctl drm: Clarify the role of plane_state argument to drm_simple update(). drm: Clear e after kfree in drm_mode_page_flip_ioctl drm: Convert cmpxchg(bool) back to a two step operation drm/bridge: ti-tfp410: support hpd via gpio drm: use .hword to represent 16-bit numbers Revert unrelated part of "drm: simplify the locking in the GETCRTC ioctl" drm: Fixup failure paths in drm_atomic_helper_set_config drm: Peek at the current counter/timestamp for vblank queries drm: Refactor vblank sequence number comparison drm: vblank cannot be enabled if dev->irq_enabled is false drm: Mark up accesses of vblank->enabled outside of its spinlock drm: Make the decision to keep vblank irq enabled earlier drm/atomic-helper: Remove the backoff hack from set_config ...
| * drm/radeon: Don't register Thunderbolt eGPU with vga_switcherooLukas Wunner2017-03-301-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | An external Thunderbolt GPU can neither drive the laptop's panel nor be powered off by the platform, so there's no point in registering it with vga_switcheroo. In fact, when the external GPU is runtime suspended, vga_switcheroo will cut power to the internal discrete GPU, resulting in a lockup. Moreover AMD's Windows driver special-cases Thunderbolt as well. Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Link: http://patchwork.freedesktop.org/patch/msgid/72d8a9645aece3eff44e116303f0fec8be061c88.1489145162.git.lukas@wunner.de
* | drm/radeon: remove useless and potentially wrong messageAndy Shevchenko2017-03-291-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | There is no need to repeat information that printed by PCI core at boot time. Besides that printing was potentially wrong since resource_size_t might be bigger than 32 bits and there is a dedicated specifier for such type, i.e. %pap. Someone can fix it and use even better approach, i.e. %pR. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* | gpu: drm: amd/radeon: Convert printk(KERN_<LEVEL> to pr_<level>Joe Perches2017-03-291-4/+4
|/ | | | | | | | | | | | Use a more common logging style. Miscellanea: o Coalesce formats and realign arguments o Neaten a few macros now using pr_<level> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/radeon: Remove drm_debugfs_remove_files() callNoralf Trønnes2017-01-271-16/+0
| | | | | | | | | | | | drm_debugfs_cleanup() now removes all minor->debugfs_list entries automatically, so it's not necessary to call drm_debugfs_remove_files(). Cc: alexander.deucher@amd.com Cc: christian.koenig@amd.com Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-13-noralf@tronnes.org
* Merge remote-tracking branch 'airlied/drm-next' into drm-misc-nextDaniel Vetter2016-12-061-0/+13
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | Backmerge v4.9-rc8 to get at commit e94bd1736f1f60e916a85a80c0b0ebeaae36cce5 Author: Michel Dänzer <michel.daenzer@amd.com> Date: Wed Nov 30 17:30:01 2016 +0900 drm: Don't call drm_for_each_crtc with a non-KMS driver so I can apply Michel's follow-up patch. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
| * Merge tag 'drm-qemu-20161121' of git://git.kraxel.org/linux into drm-nextDave Airlie2016-11-301-0/+13
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | drm/virtio: fix busid in a different way, allocate more vbufs. drm/qxl: various bugfixes and cleanups, * tag 'drm-qemu-20161121' of git://git.kraxel.org/linux: (224 commits) drm/virtio: allocate some extra bufs qxl: Allow resolution which are not multiple of 8 qxl: Don't notify userspace when monitors config is unchanged qxl: Remove qxl_bo_init() return value qxl: Call qxl_gem_{init, fini} qxl: Add missing '\n' to qxl_io_log() call qxl: Remove unused prototype qxl: Mark some internal functions as static Revert "drm: virtio: reinstate drm_virtio_set_busid()" drm/virtio: fix busid regression drm: re-export drm_dev_set_unique Linux 4.9-rc5 gp8psk: Fix DVB frontend attach gp8psk: fix gp8psk_usb_in_op() logic dvb-usb: move data_mutex to struct dvb_usb_device iio: maxim_thermocouple: detect invalid storage size in read() aoe: fix crash in page count manipulation lightnvm: invalid offset calculation for lba_shift Kbuild: enable -Wmaybe-uninitialized warnings by default pcmcia: fix return value of soc_pcmcia_regulator_set ...
| | * drm/radeon: disable runtime pm in certain casesAlex Deucher2016-10-311-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the platform does not support hybrid graphics or ATPX dGPU power control. bug: https://bugzilla.kernel.org/show_bug.cgi?id=51381 Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
* | | drm/radeon: don't add files at control minor debugfs directoryNicolai Stange2016-12-051-6/+0
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 8a357d10043c ("drm: Nerf DRM_CONTROL nodes"), a struct drm_device's ->control member is always NULL. In the case of CONFIG_DEBUG_FS=y, radeon_debugfs_add_files() accesses ->control->debugfs_root though. This results in the following Oops: BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 IP: radeon_debugfs_add_files+0x90/0x100 [radeon] PGD 0 Oops: 0000 [#1] SMP [...] Call Trace: ? work_on_cpu+0xb0/0xb0 radeon_fence_driver_init+0x120/0x150 [radeon] si_init+0x122/0xd50 [radeon] ? _raw_spin_unlock_irq+0x2c/0x40 ? device_pm_check_callbacks+0xb3/0xc0 radeon_device_init+0x958/0xda0 [radeon] radeon_driver_load_kms+0x9a/0x210 [radeon] drm_dev_register+0xa9/0xd0 [drm] drm_get_pci_dev+0x9c/0x1e0 [drm] radeon_pci_probe+0xb8/0xe0 [radeon] [...] Fix this by omitting the drm_debugfs_create_files() call for the control minor debugfs directory which is now non-existent anyway. Fixes: 8a357d10043c ("drm: Nerf DRM_CONTROL nodes") Signed-off-by: Nicolai Stange <nicstange@gmail.com> Acked-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161203144700.2307-1-nicstange@gmail.com
* | Merge tag 'topic/drm-misc-2016-10-27' of ↵Dave Airlie2016-10-281-1/+1
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://anongit.freedesktop.org/git/drm-intel into drm-next Pull request already again to get the s/fence/dma_fence/ stuff in and allow everyone to resync. Otherwise really just misc stuff all over, and a new bridge driver. * tag 'topic/drm-misc-2016-10-27' of git://anongit.freedesktop.org/git/drm-intel: drm/bridge: fix platform_no_drv_owner.cocci warnings drm/bridge: fix semicolon.cocci warnings drm: Print some debug/error info during DP dual mode detect drm: mark drm_of_component_match_add dummy inline drm/bridge: add Silicon Image SiI8620 driver dt-bindings: add Silicon Image SiI8620 bridge bindings video: add header file for Mobile High-Definition Link (MHL) interface drm: convert DT component matching to component_match_add_release() dma-buf: Rename struct fence to dma_fence dma-buf/fence: add an lockdep_assert_held() drm/dp: Factor out helper to distinguish between branch and sink devices drm/edid: Only print the bad edid when aborting drm/msm: add missing header dependencies drm/msm/adreno: move function declarations to header file drm/i2c/tda998x: mark symbol static where possible doc: add missing docbook parameter for fence-array drm: RIP mode_config->rotation_property drm/msm/mdp5: Advertize 180 degree rotation drm/msm/mdp5: Use per-plane rotation property
| * | dma-buf: Rename struct fence to dma_fenceChris Wilson2016-10-251-1/+1
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I plan to usurp the short name of struct fence for a core kernel struct, and so I need to rename the specialised fence/timeline for DMA operations to make room. A consensus was reached in https://lists.freedesktop.org/archives/dri-devel/2016-July/113083.html that making clear this fence applies to DMA operations was a good thing. Since then the patch has grown a bit as usage increases, so hopefully it remains a good thing! (v2...: rebase, rerun spatch) v3: Compile on msm, spotted a manual fixup that I broke. v4: Try again for msm, sorry Daniel coccinelle script: @@ @@ - struct fence + struct dma_fence @@ @@ - struct fence_ops + struct dma_fence_ops @@ @@ - struct fence_cb + struct dma_fence_cb @@ @@ - struct fence_array + struct dma_fence_array @@ @@ - enum fence_flag_bits + enum dma_fence_flag_bits @@ @@ ( - fence_init + dma_fence_init | - fence_release + dma_fence_release | - fence_free + dma_fence_free | - fence_get + dma_fence_get | - fence_get_rcu + dma_fence_get_rcu | - fence_put + dma_fence_put | - fence_signal + dma_fence_signal | - fence_signal_locked + dma_fence_signal_locked | - fence_default_wait + dma_fence_default_wait | - fence_add_callback + dma_fence_add_callback | - fence_remove_callback + dma_fence_remove_callback | - fence_enable_sw_signaling + dma_fence_enable_sw_signaling | - fence_is_signaled_locked + dma_fence_is_signaled_locked | - fence_is_signaled + dma_fence_is_signaled | - fence_is_later + dma_fence_is_later | - fence_later + dma_fence_later | - fence_wait_timeout + dma_fence_wait_timeout | - fence_wait_any_timeout + dma_fence_wait_any_timeout | - fence_wait + dma_fence_wait | - fence_context_alloc + dma_fence_context_alloc | - fence_array_create + dma_fence_array_create | - to_fence_array + to_dma_fence_array | - fence_is_array + dma_fence_is_array | - trace_fence_emit + trace_dma_fence_emit | - FENCE_TRACE + DMA_FENCE_TRACE | - FENCE_WARN + DMA_FENCE_WARN | - FENCE_ERR + DMA_FENCE_ERR ) ( ... ) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161025120045.28839-1-chris@chris-wilson.co.uk
* | drm/radeon: clarify why we evict vram twice on suspendAlex Deucher2016-10-251-1/+4
|/ | | | | | | Update the comment to explain why we do this. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/radeon: narrow asic_init for virtualizationAlex Deucher2016-09-221-2/+3
| | | | | | | | Only needed on CIK+ due to the way pci reset is handled by the GPU. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
* Revert "drm/radeon: skip suspend/resume on DRM_SWITCH_POWER_DYNAMIC_OFF"Alex Deucher2016-09-191-4/+2
| | | | | | This is not necessary as pointed out by Lukas Wunner. This reverts commit 5e0b1617fc38a27cf494c5d0b51f08de77ce0d20.
* drm/radeon/radeon_device: remove unused functionBaoyou Xie2016-09-161-11/+0
| | | | | | | | | | | | | We get 2 warnings when building kernel with W=1: drivers/gpu/drm/radeon/radeon_device.c:1961:5: warning: no previous prototype for 'radeon_debugfs_init' [-Wmissing-prototypes] drivers/gpu/drm/radeon/radeon_device.c:1966:6: warning: no previous prototype for 'radeon_debugfs_cleanup' [-Wmissing-prototypes] In fact, these functions are dummy, but can be removed, so this patch removes them. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/radeon: wire up a pci shutdown callbackAlex Deucher2016-09-021-1/+1
| | | | | | | | | | | | Normally on shutdown or reboot we don't care about necessarily making sure the hw is in a good state because the system is about to be powered down or reset. However, after a shutdown or reboot in a VM, it's best to tear down the hw properly otherwise there can be problems with the next VM use. Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/radeon: skip suspend/resume on DRM_SWITCH_POWER_DYNAMIC_OFFAlex Deucher2016-09-021-2/+4
| | | | | | | | Missed this case previously. No need to do anything if the device is already off. runtime pm will handle it. Acked-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* Merge tag 'topic/drm-misc-2016-07-14' of ↵Dave Airlie2016-07-151-0/+4
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://anongit.freedesktop.org/drm-intel into drm-next I recovered dri-devel backlog from my vacation, more misc stuff: - of_put_node fixes from Peter Chen (not all yet) - more patches from Gustavo to use kms-native drm_crtc_vblank_* funcs - docs sphinxification from Lukas Wunner - bunch of fixes all over from Dan Carpenter - more follow up work from Chris register/unregister rework in various places - vgem dma-buf export (for writing testcases) - small things all over from tons of different people * tag 'topic/drm-misc-2016-07-14' of git://anongit.freedesktop.org/drm-intel: (52 commits) drm: Don't overwrite user ioctl arg unless requested dma-buf/sync_file: improve Kconfig description for Sync Files MAINTAINERS: add entry for the Sync File Framework drm: Resurrect atomic rmfb code drm/vgem: Use PAGE_KERNEL in place of x86-specific PAGE_KERNEL_IO qxl: silence uninitialized variable warning qxl: check for kmap failures vga_switcheroo: Sphinxify docs drm: Restore double clflush on the last partial cacheline gpu: drm: rockchip_drm_drv: add missing of_node_put after calling of_parse_phandle gpu: drm: sti_vtg: add missing of_node_put after calling of_parse_phandle gpu: drm: sti_hqvdp: add missing of_node_put after calling of_parse_phandle gpu: drm: sti_vdo: add missing of_node_put after calling of_parse_phandle gpu: drm: sti_compositor: add missing of_node_put after calling of_parse_phandle drm/tilcdc: use drm_crtc_handle_vblank() drm/rcar-du: use drm_crtc_handle_vblank() drm/nouveau: use drm_crtc_handle_vblank() drm/atmel: use drm_crtc_handle_vblank() drm/armada: use drm_crtc_handle_vblank() drm: make drm_vblank_count_and_time() static ...
| * drm/radeon: Don't leak runtime pm ref on driver loadLukas Wunner2016-06-241-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | radeon_device_init() returns an error if either of the two calls to radeon_init() fail. One level up in the call stack, radeon_driver_load_kms() will then skip runtime pm initialization and call radeon_driver_unload_kms(), which acquires a runtime pm ref that is leaked. Balance by releasing a runtime pm ref in the error path of radeon_device_init(). Fixes: 10ebc0bc0934 ("drm/radeon: add runtime PM support (v2)") Cc: Dave Airlie <airlied@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/fa5bb977c1fe00474acedae5b03232dbf0b49410.1465392124.git.lukas@wunner.de
* | drm/radeon: fix asic initialization for virtualized environmentsAlex Deucher2016-06-131-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When executing in a PCI passthrough based virtuzliation environment, the hypervisor will usually attempt to send a PCIe bus reset signal to the ASIC when the VM reboots. In this scenario, the card is not correctly initialized, but we still consider it to be posted. Therefore, in a passthrough based environemnt we should always post the card to guarantee it is in a good state for driver initialization. Ported from amdgpu commit: amdgpu: fix asic initialization for virtualized environments Cc: Andres Rodriguez <andres.rodriguez@amd.com> Cc: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
* | drm/radeon: do not hard reset GPU while freezing on r600/r700 familyJérôme Glisse2016-06-131-1/+1
|/ | | | | | | | | | | | Seems r600/r700 does not like hard reset while freezing for hibernation (regression due to 274ad65c9d02bdcbee9bae045517864c3521d530 which itself is a fix for hibernation on some GPU families). Until i can debug further issue with r600, let just disable this for r600/r700 as they are very similar family and bug affecting one likely affect the other. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* Merge tag 'v4.6-rc7' into drm-nextDave Airlie2016-05-091-10/+4
|\ | | | | | | | | Merge this back as we've built up a fair few conflicts, and I have some newer trees to pull in.
| * Revert "drm/radeon: disable runtime pm on PX laptops without dGPU power control"Alex Deucher2016-04-181-7/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit e64c952efb8e0c15ae82cec8e455ab4910690ef1. ATPX is the ACPI method for controlling AMD PowerXpress laptops. There are flags to indicate which methods are supported. If the dGPU power down flag is not supported, the driver needs to implement the dGPU power down manually. We had previously always forced the driver to assume the ATPX dGPU power down was present, but this causes problems on boards where it is not, leading to GPU hangs when attempting to power down the dGPU. Manual dGPU power down is not currently supported in the Linux driver. Some laptops indicate that the ATPX dGPU power down method is not present, but it actually apparently is. I'm not sure if this is a bios bug and it should be set or if there is a reason it was unset and the method should not be used. This is not an issue on other OSes since both the ATPX and the manual driver power down methods are supported. This is apparently fairly widespread, so just revert for now. bugs: https://bugzilla.kernel.org/show_bug.cgi?id=115321 https://bugzilla.kernel.org/show_bug.cgi?id=116581 https://bugzilla.kernel.org/show_bug.cgi?id=116251 Cc: stable@vger.kernel.org
| * drm/radeon: print pci revision as well as pci ids on driver loadAlex Deucher2016-04-181-3/+3
| | | | | | | | | | | | | | The pci revision id is useful in debugging certain things as it's part of how SKUs are defined on newer asics. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* | drm/radeon: hard reset r600 and newer GPU when hibernating.Jérome Glisse2016-05-021-3/+7
|/ | | | | | | | | | | | Some GPU block like UVD and VCE require hard reset to be properly resume if there is no real powerdown of the asic like during various hibernation step. This patch perform such hard reset. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* Merge branch 'drm-next-4.6' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie2016-03-181-4/+4
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | into drm-next A few other misc cleanups and bug fixes for 4.6. Highlights: - unify endian handling in powerplay - powerplay fixes - fix a regression in 4.5 on boards with no display connectors - fence cleanups and locking fixes - whitespace cleanups and code refactoring in radeon * 'drm-next-4.6' of git://people.freedesktop.org/~agd5f/linux: (35 commits) drm/amdgpu/gfx7: add MTYPE definition drm/amdgpu: removing BO_VAs shouldn't be interruptible drm/amd/powerplay: show uvd/vce power gate enablement for tonga. drm/amd/powerplay: show uvd/vce power gate info for fiji drm/amdgpu: use sched fence if possible drm/amdgpu: move ib.fence to job.fence drm/amdgpu: give a fence param to ib_free drm/amdgpu: include the right version of gmc header files for iceland drm/radeon: fix indentation. drm/amd/powerplay: add uvd/vce dpm enabling flag to fix the performance issue for CZ drm/amdgpu: switch back to 32bit hw fences v2 drm/amdgpu: remove amdgpu_fence_is_signaled drm/amdgpu: drop the extra fence range check v2 drm/amdgpu: signal fences directly in amdgpu_fence_process drm/amdgpu: cleanup amdgpu_fence_wait_empty v2 drm/amdgpu: keep all fences in an RCU protected array v2 drm/amdgpu: add number of hardware submissions to amdgpu_fence_driver_init_ring drm/amdgpu: RCU protected amd_sched_fence_release drm/amdgpu: RCU protected amdgpu_fence_release drm/amdgpu: merge amdgpu_fence_process and _activity ...
| * drm/radeon: fix indentation.Jérome Glisse2016-03-161-4/+4
| | | | | | | | | | | | | | | | | | | | | | I hate doing this but it hurts my eyes to go over code that does not comply with indentation rules. Only thing that is not only space change is in atom.c all other files are space indentation issues. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* | Merge branch 'drm-next-4.6' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie2016-03-171-1/+7
|\ \ | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | into drm-next A few more fixes and cleanups for 4.6: - DCE code cleanups - HDP flush/invalidation fixes - GPUVM fixes - switch to drm_vblank_[on|off] - PX fixes - misc bug fixes * 'drm-next-4.6' of git://people.freedesktop.org/~agd5f/linux: (50 commits) drm/amdgpu: split pipeline sync out of SDMA vm_flush() as well drm/amdgpu: Revert "add mutex for ba_va->valids/invalids" drm/amdgpu: Revert "add lock for interval tree in vm" drm/amdgpu: Revert "add spin lock to protect freed list in vm (v3)" drm/amdgpu: reserve the PD during unmap and remove drm/amdgpu: Fix two bugs in amdgpu_vm_bo_split_mapping drm/radeon: Don't drop DP 2.7 Ghz link setup on some cards. MAINTAINERS: update radeon entry to include amdgpu as well drm/amdgpu: disable runtime pm on PX laptops without dGPU power control drm/radeon: disable runtime pm on PX laptops without dGPU power control drm/amd/amdgpu: Fix indentation in do_set_base() (DCEv8) drm/amd/amdgpu: make afmt_init cleanup if alloc fails (DCEv8) drm/amd/amdgpu: Move config init flag to bottom of sw_init (DCEv8) drm/amd/amdgpu: Don't proceed into audio_fini if audio is disabled (DCEv8) drm/amd/amdgpu: Fix identation in do_set_base() (DCEv10) drm/amd/amdgpu: Make afmt_init cleanup if alloc fails (DCEv10) drm/amd/amdgpu: Move initialized flag to bottom of sw_init (DCEv10) drm/amd/amdgpu: Don't proceed in audio_fini if disabled (DCEv10) drm/amd/amdgpu: Fix indentation in dce_v11_0_crtc_do_set_base() drm/amd/amdgpu: Make afmt_init() cleanup if alloc fails (DCEv11) ...
| * drm/radeon: disable runtime pm on PX laptops without dGPU power controlAlex Deucher2016-03-091-1/+7
| | | | | | | | | | | | | | | | | | | | Some PX laptops don't provide an ACPI method to control dGPU power. On those systems, the driver is responsible for handling the dGPU power state. Disable runtime PM on them until support for this is implemented. Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
* | Revert "drm/radeon: call hpd_irq_event on resume"Linus Torvalds2016-03-071-1/+0
|/ | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit dbb17a21c131eca94eb31136eee9a7fe5aff00d9. It turns out that commit can cause problems for systems with multiple GPUs, and causes X to hang on at least a HP Pavilion dv7 with hybrid graphics. This got noticed originally in 4.4.4, where this patch had already gotten back-ported, but 4.5-rc7 was verified to have the same problem. Alexander Deucher says: "It looks like you have a muxed system so I suspect what's happening is that one of the display is being reported as connected for both the IGP and the dGPU and then the desktop environment gets confused or there some sort problem in the detect functions since the mux is not switched to the dGPU. I don't see an easy fix unless Dave has any ideas. I'd say just revert for now" Reported-by: Jörg-Volker Peetz <jvpeetz@web.de> Acked-by: Alexander Deucher <Alexander.Deucher@amd.com> Cc: Dave Airlie <airlied@gmail.com> Cc: stable@kernel.org # wherever dbb17a21c131 got back-ported Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drm/radeon: fix trivial typo in warning messageAlexandre Demers2016-01-081-1/+1
| | | | | | Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/radeon: call hpd_irq_event on resumeAlex Deucher2015-12-021-0/+1
| | | | | | | | Need to call this on resume if displays changes during suspend in order to properly be notified of changes. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
* drm/radeon: Spell vga_switcheroo consistentlyLukas Wunner2015-10-021-1/+1
| | | | | | | | | | | | Currently everyone and their dog has their own favourite spelling for vga_switcheroo. This makes it hard to grep dmesg for log entries relating to vga_switcheroo. It also makes it hard to find related source files in the tree. vga_switcheroo.c uses pr_fmt "vga_switcheroo". Use that everywhere. Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/radeon: Sprinkle drm_modeset_lock_all to appease locking checksDaniel Vetter2015-09-231-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | In commit 7a3f3d6667f5f9ffd1517f6b21d64bbf5312042c Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Jul 9 23:44:28 2015 +0200 drm: Check locking in drm_for_each_connector I added locking checks to drm_for_each_connector but failed that through drm_helper_connector_dpms -> drm_helper_choose_encoder_dpms it's used in a few more places in the radeon resume/suspend code. Fix them up. Note that we could use the connector iterator macros in there too, but that's for the future. Reported-and-tested-by: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/radeon: unpin cursor BOs on suspend and pin them again on resume (v2)Grigori Goronzy2015-07-091-1/+33
| | | | | | | | | | | | | | | | | | Everything is evicted from VRAM before suspend, so we need to make sure all BOs are unpinned and re-pinned after resume. Fixes broken mouse cursor after resume introduced by commit b9729b17. [Michel Dänzer: Add pinning BOs on resume] v2: [Alex Deucher: merge cursor unpin into fb unpin loop] Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=100541 Cc: stable@vger.kernel.org Reviewed-by: Christian König <christian.koenig@amd.com> (v1) Signed-off-by: Grigori Goronzy <greg@chown.ath.cx> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/radeon: default to 2048 MB GART size on SI+Grigori Goronzy2015-07-081-13/+19
| | | | | | | | | | | | | | Newer ASICs have more VRAM on average and allocating more GART as well can have advantages. Also see commit edcd26e8. Ideally, we should scale GART size based on actual VRAM size, but that requires significant restructuring of initialization. v2: extract small helper, apply to error paths Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Grigori Goronzy <greg@chown.ath.cx> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds2015-06-261-0/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull drm updates from Dave Airlie: "This is the main drm pull request for v4.2. I've one other new driver from freescale on my radar, it's been posted and reviewed, I'd just like to get someone to give it a last look, so maybe I'll send it or maybe I'll leave it. There is no major nouveau changes in here, Ben was working on something big, and we agreed it was a bit late, there wasn't anything else he considered urgent to merge. There might be another msm pull for some bits that are waiting on arm-soc, I'll see how we time it. This touches some "of" stuff, acks are in place except for the fixes to the build in various configs,t hat I just applied. Summary: New drivers: - virtio-gpu: KMS only pieces of driver for virtio-gpu in qemu. This is just the first part of this driver, enough to run unaccelerated userspace on. As qemu merges more we'll start adding the 3D features for the virgl 3d work. - amdgpu: a new driver from AMD to driver their newer GPUs. (VI+) It contains a new cleaner userspace API, and is a clean break from radeon moving forward, that AMD are going to concentrate on. It also contains a set of register headers auto generated from AMD internal database. core: - atomic modesetting API completed, enabled by default now. - Add support for mode_id blob to atomic ioctl to complete interface. - bunch of Displayport MST fixes - lots of misc fixes. panel: - new simple panels - fix some long-standing build issues with bridge drivers radeon: - VCE1 support - add a GPU reset counter for userspace - lots of fixes. amdkfd: - H/W debugger support module - static user-mode queues - support killing all the waves when a process terminates - use standard DECLARE_BITMAP i915: - Add Broxton support - S3, rotation support for Skylake - RPS booting tuning - CPT modeset sequence fixes - ns2501 dither support - enable cmd parser on haswell - cdclk handling fixes - gen8 dynamic pte allocation - lots of atomic conversion work exynos: - Add atomic modesetting support - Add iommu support - Consolidate drm driver initialization - and MIC, DECON and MIPI-DSI support for exynos5433 omapdrm: - atomic modesetting support (fixes lots of things in rewrite) tegra: - DP aux transaction fixes - iommu support fix msm: - adreno a306 support - various dsi bits - various 64-bit fixes - NV12MT support rcar-du: - atomic and misc fixes sti: - fix HDMI timing complaince tilcdc: - use drm component API to access tda998x driver - fix module unloading qxl: - stability fixes" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (872 commits) drm/nouveau: Pause between setting gpu to D3hot and cutting the power drm/dp/mst: close deadlock in connector destruction. drm: Always enable atomic API drm/vgem: Set unique to "vgem" of: fix a build error to of_graph_get_endpoint_by_regs function drm/dp/mst: take lock around looking up the branch device on hpd irq drm/dp/mst: make sure mst_primary mstb is valid in work function of: add EXPORT_SYMBOL for of_graph_get_endpoint_by_regs ARM: dts: rename the clock of MIPI DSI 'pll_clk' to 'sclk_mipi' drm/atomic: Don't set crtc_state->enable manually drm/exynos: dsi: do not set TE GPIO direction by input drm/exynos: dsi: add support for MIC driver as a bridge drm/exynos: dsi: add support for Exynos5433 drm/exynos: dsi: make use of array for clock access drm/exynos: dsi: make use of driver data for static values drm/exynos: dsi: add macros for register access drm/exynos: dsi: rename pll_clk to sclk_clk drm/exynos: mic: add MIC driver of: add helper for getting endpoint node of specific identifiers drm/exynos: add Exynos5433 decon driver ...
| * drm/radeon: add a GPU reset counter queryable by userspaceMarek Olšák2015-05-261-0/+2
| | | | | | | | | | | | | | | | | | Userspace will be able to tell whether a GPU reset occured by comparing an old referece value of the counter with a new value. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Marek Olšák <marek.olsak@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* | drm/radeon: fix freeze for laptop with Turks/Thames GPU.Jérôme Glisse2015-06-111-0/+15
|/ | | | | | | | | | | | | | Laptop with Turks/Thames GPU will freeze if dpm is enabled. It seems the SMC engine is relying on some state inside the CP engine. CP needs to chew at least one packet for it to get in good state for dynamic power management. This patch simply disabled and re-enable DPM after the ring test which is enough to avoid the freeze. Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/radeon: add DisplayPort MST support (v2)Dave Airlie2015-03-191-0/+5
| | | | | | | | | | | | | | | | This adds initial DP 1.2 MST support to radeon, on CAYMAN and up in theory. This is off by default. v2: agd5f: - add UNIPHY3 offsets - move atom cmd table code into atombios_encoders.c - whitespace cleanup - replace some magic numbers with proper defines Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
* drm/radeon: Split off gart_get_page_entry ASIC hook from set_page_entryMichel Dänzer2015-01-221-0/+2
| | | | | | | | | | | | get_page_entry calculates the GART page table entry, which is just written to the GART page table by set_page_entry. This is a prerequisite for the following fix. Reviewed-by: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
OpenPOWER on IntegriCloud