summaryrefslogtreecommitdiffstats
path: root/drivers/gpio/Kconfig
Commit message (Collapse)AuthorAgeFilesLines
* gpio: ab8500: Mark brokenThomas Gleixner2011-03-291-1/+1
| | | | | | | | | | | This driver is broken in several aspects. 1) old style irq_chip functions. Sigh 2) Abuse of the unlock callback. That's not supposed to be a state machine for evrything and some more. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* gpio: driver for 42 AB8500 GPIO pinsBibek Basu2011-03-281-0/+5
| | | | | | | | | | | | To get rid of port expanders, the free GPIOs of ab8500 can be used. There are 42 GPIO pins. Out of which 16 are interrupt capable.This patch implements 16 virtual IRQ mapped to 16 interrupt capable AB8500 GPIOs. Signed-off-by: Bibek Basu <bibek.basu@stericsson.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> [Renamed header file as per MFD structure] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* gpio: Add Tunnel Creek support to sch_gpioDenis Turischev2011-03-231-2/+5
| | | | | | | | | | | | Almost the same driver for both Poulsbo and Tunnel Creek. The difference is in quantity of GPIOs powered by the core power rail and by suspend power supply, default values for some GPIOs, etc. Detect actual hardware by platform device ID assigned in lpc_sch and set configuration accordingly. Signed-off-by: Denis Turischev <denis@compulab.co.il> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* gpio; Make Intel chipset gpio drivers depend on x86Thomas Gleixner2011-03-171-3/+3
| | | | | | | | Nothing outside of x86 can use that code. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* gpio/mcp23s08: support mcp23s17 variantPeter Korsgaard2011-03-121-3/+3
| | | | | | | | | | | mpc23s17 is very similar to the mcp23s08, except that registers are 16bit wide, so extend the interface to work with both variants. The s17 variant also has an additional address pin, so adjust platform data structure to support up to 8 devices per SPI chipselect. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* gpio/ml_ioh_gpio: ML7213 GPIO driverTomoya MORINAGA2011-01-131-0/+9
| | | | | | | | | | | | | | | | ML7213 is a companion chip for Intel Atom E6xx series. This driver can be used for OKI SEMICONDUCTOR ML7213 IOH(Input/Output Hub) which is for IVI(In-Vehicle Infotainment) use. This driver can access the IOH's GPIO device. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Rabin Vincent <rabin.vincent@stericsson.com> Cc: Marc Zyngier <maz@misterjones.org> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* GPIO_VX855: eliminate kconfig dependency warningRandy Dunlap2011-01-131-1/+1
| | | | | | | | | | | Fix kconfig dependency warning to satisfy dependencies: warning: (GPIO_VX855 && GPIOLIB) selects MFD_VX855 which has unmet direct dependencies (MFD_SUPPORT && PCI) Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Daniel Drake <dsd@laptop.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* GPIO_RDC321X: select MFD_SUPPORT to squelch kconfig warningRandy Dunlap2011-01-131-0/+1
| | | | | | | | | | | Fix kconfig dependency warning to satisfy dependencies: warning: (GPIO_RDC321X && PCI && GPIOLIB) selects MFD_RDC321X which has unmet direct dependencies (MFD_SUPPORT && PCI) Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/gpio/cs5535-gpio.c: add some additional cs5535-specific GPIO ↵Andres Salomon2011-01-131-1/+1
| | | | | | | | | | | | | | | | | | | | functionality This adds (well, re-adds actually) handling for events/IRQs through cs5535 GPIOs. In the wild and wooly world of CS5535, setup_event() is for assigning an IRQ to a GPIO filter/event pair, and set_irq() sets up the pair to trigger IRQs. These should really only be used in highly platform-specific drivers (such as OLPC's DCON driver). Sadly, because set_irq() uses MSRs, this causes the driver to become X86-specific. Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Daniel Drake <dsd@laptop.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mfd/tc35892: rename tc35892 core driver to tc3589xSundar Iyer2010-12-191-4/+4
| | | | | | | | | Rename the tc35892 core/gpio drivers to tc3589x to include new variants in the same mfd core Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Sundar Iyer <sundar.iyer@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
* gpio: Add VIA VX855 GPIO driverDaniel Drake2010-10-291-0/+12
| | | | | | | | | | | This is needed for supporting the upcoming VX855 camera and OLPC DCON drivers, as well as the advanced viafb features on non-OLPC hardware based on this chip. Based on earlier work by Harald Welte. Signed-off-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* gpio: add Topcliff PCH GPIO driverTomoya MORINAGA2010-10-271-0/+8
| | | | | | | | | | | | | | | | | | | Topcliff PCH is the platform controller hub that is going to be used in Intel's upcoming general embedded platform. All IO peripherals in Topcliff PCH are actually devices sitting on AMBA bus. Topcliff PCH has GPIO I/F. Using this I/F, it is able to access system devices connected to GPIO. [akpm@linux-foundation.org: ese DEFINE_PCI_DEVICE_TABLE (per Joe Perches)] Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Rabin Vincent <rabin.vincent@stericsson.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Tomoya MORINAGA <morinaga526@dsn.okisemi.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* gpio: adp5588-gpio: support interrupt controllerMichael Hennerich2010-10-271-0/+7
| | | | | | | | | | | Implement irq_chip functionality on ADP5588/5587 GPIO expanders. Only level sensitive interrupts are supported. Interrupts provided by this irq_chip must be requested using request_threaded_irq(). Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* gpio: add support for 74x164 serial-in/parallel-out 8-bit shift registerMiguel Gaio2010-10-271-0/+8
| | | | | | | | | | | | Add support for generic 74x164 serial-in/parallel-out 8-bits shift register. This driver can be used as a GPIO output expander. [akpm@linux-foundation.org: remove unused local `refresh'] Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com> Signed-off-by: Juhos Gabor <juhosg@openwrt.org> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* gpio: add driver for basic memory-mapped GPIO controllersAnton Vorontsov2010-10-271-0/+5
| | | | | | | | | | | | | | | | | | | | | | | The basic GPIO controllers may be found in various on-board FPGA and ASIC solutions that are used to control board's switches, LEDs, chip-selects, Ethernet/USB PHY power, etc. These controllers may not provide any means of pin setup (in/out/open drain). The driver supports: - 8/16/32/64 bits registers; - GPIO controllers with clear/set registers; - GPIO controllers with a single "data" register; - Big endian bits/GPIOs ordering (mostly used on PowerPC). Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: David Brownell <david-b@pacbell.net> Cc: Samuel Ortiz <sameo@linux.intel.com>, Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* gpio: Add STMPE GPIO driverRabin Vincent2010-08-121-0/+7
| | | | | | | | | | | Add support for the GPIOs on STMPE I/O Expanders. [l.fu@pengutronix.de: fix set direction input] [l.fu@pengutronix.de: set GPIO alternate function while requesting] Acked-by: Luotao Fu <l.fu@pengutronix.de> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* gpio: sx150x: add Semtech I2C sx150x gpio expander driverGregory Bean2010-08-111-0/+11
| | | | | | | | | | | | | | | Add support for Semtech SX150-series I2C GPIO expanders. Compatible models include: 8 bits: sx1508q 16 bits: sx1509q Signed-off-by: Gregory Bean <gbean@codeaurora.org> Cc: David Brownell <david-b@pacbell.net> Cc: Jean Delvare <khali@linux-fr.org> Cc: Trilok Soni <tsoni@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/gpio is platform-neutralDavid Brownell2010-06-291-1/+1
| | | | | | | | | | | Update Kconfig and Makefile in drivers/gpio to discourage inappropriate addition of platform-specific code. [akpm@linux-foundation.org: fix tpyo] Signed-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* gpio: rdc321x needs to select MFD_CORERandy Dunlap2010-05-281-0/+1
| | | | | | | | | | | | | Fix rdc321x-southbridge build: GPIO_RDC321X needs to select MFD_CORE so that the core is built at the same (or higher) tristate level. rdc321x-southbridge.c:(.devinit.text+0x6103): undefined reference to `mfd_add_devices' rdc321x-southbridge.c:(.devexit.text+0xe5f): undefined reference to `mfd_remove_devices' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* gpio: Add TC35892 GPIO driverRabin Vincent2010-05-281-0/+7
| | | | | | | | Add a GPIO driver to support the GPIOs on the TC35892 I/O Expander. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* gpio: Add support for Janz VMOD-TTL Digital IO moduleIra W. Snyder2010-05-281-0/+10
| | | | | | | | | | | | | | The Janz VMOD-TTL is a MODULbus daughterboard which fits onto any MODULbus carrier board. It essentially consists of some various logic and a Zilog Z8536 CIO Counter/Timer and Parallel IO Unit. The board must be physically configured with jumpers to enable a user to drive output signals. I am only interested in outputs, so I have made this driver as simple as possible. It only supports a very minimal subset of the features provided by the Z8536 chip. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* gpio: Add support for RDC321x GPIO controllerFlorian Fainelli2010-05-281-0/+8
| | | | | | | This patch adds a new GPIO driver for the RDC321x SoC GPIO controller. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* gpio: add Penwell gpio supportAlek Du2010-05-271-2/+2
| | | | | | | | | | | Intel Penwell chip has two 96 pins GPIO blocks, which are very similiar as Intel Langwell chip GPIO block, except for pin number difference. This patch expends the original Langwell GPIO driver to support Penwell's. Signed-off-by: Alek Du <alek.du@intel.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* gpio: add interrupt handling capability to max732xMarc Zyngier2010-05-271-0/+7
| | | | | | | | | | | | | | Most of the GPIO expanders supported by the max732x driver have interrupt generation capability by reporting changes on input pins through an INT# pin. This patch implements the irq_chip functionnality (edge detection only). Signed-off-by: Marc Zyngier <maz@misterjones.org> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jebediah Huang <jebediah.huang@gmail.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mfd: Fix lpc_sch related depends/selects, fix build errorRandy Dunlap2010-03-071-1/+2
| | | | | | | | | | | | | LPC_SCH is selected by GPI_SCH and I2C_ISCH, even when PCI is not enabled, but LPC_SCH depends on PCI, so make GPI_SCH and I2C_ISCH also depend on PCI. Those 2 selects also need to select what LPC_SCH selects, since kconfig does not follow selects. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Denis Turischev <denis@compulab.co.il> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* gpio: add Intel SCH GPIO controller driverDenis Turischev2010-03-071-0/+16
| | | | | Signed-off-by: Denis Turischev <denis@compulab.co.il> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* gpiolib: Add WM8994 GPIO supportMark Brown2010-03-071-0/+7
| | | | | | | The WM8994 has 11 GPIO lines. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* gpiolib: Add support for WM8350 GPIO controllerMark Brown2010-03-071-0/+7
| | | | | Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* gpio: introduce it8761e_gpio driver for IT8761E Super I/O chipDenis Turischev2010-03-061-0/+6
| | | | | | | Signed-off-by: Denis Turischev <denis@compulab.co.il> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* gpio: pca953x.c: add interrupt handling capabilityMarc Zyngier2010-03-061-0/+7
| | | | | | | | | | | | | | | | | | Most of the GPIO expanders controlled by the pca953x driver are able to report changes on the input pins through an *INT pin. This patch implements the irq_chip functionality (edge detection only). The driver has been tested on an Arcom Zeus. [akpm@linux-foundation.org: the compiler does inlining for us nowadays] Signed-off-by: Marc Zyngier <maz@misterjones.org> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: David Brownell <david-b@pacbell.net> Cc: Nate Case <ncase@xes-inc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* gpio: add driver for MAX7300 I2C GPIO extenderWolfram Sang2010-03-061-1/+12
| | | | | | | | | | | | | | | | Add the MAX7300-I2C variant of the MAX7301-SPI version. Both chips share the same core logic, so the generic part of the in-kernel SPI-driver is refactored into a generic part. The I2C and SPI specific funtions are then wrapped into seperate drivers picking up the generic part. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Juergen Beisert <j.beisert@pengutronix.de> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Jean Delvare <khali@linux-fr.org> Cc: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* gpio: adp5588-gpio: new driver for ADP5588 GPIO expandersMichael Hennerich2010-01-111-0/+9
| | | | | | | | | Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: Jean Delvare <khali@linux-fr.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* gpio: add GPIO driver for the Timberdale FPGARichard Röjfors2009-12-161-0/+6
| | | | | | | | | | | | A GPIO driver for the Timberdale FPGA found on the Intel Atom board Russellville. The GPIO driver also has an IRQ-chip to support interrupts on the pins. Signed-off-by: Richard Röjfors <richard.rojfors@mocean-labs.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* cs5535: drop the Geode-specific MFGPT/GPIO codeAndres Salomon2009-12-151-1/+1
| | | | | | | | | | | | | | | With generic modular drivers handling all of this stuff, the geode-specific code can go away. The cs5535-gpio, cs5535-mfgpt, and cs5535-clockevt drivers now handle this. Signed-off-by: Andres Salomon <dilinger@collabora.co.uk> Cc: Jordan Crouse <jordan@cosmicpenguin.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: john stultz <johnstul@us.ibm.com> Cc: Chris Ball <cjb@laptop.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* cs5535-gpio: add AMD CS5535/CS5536 GPIO driver supportAndres Salomon2009-12-151-0/+10
| | | | | | | | | | | | | | | | | | | | This creates a CS5535/CS5536 GPIO driver which uses a gpio_chip backend (allowing GPIO users to use the generic GPIO API if desired) while also allowing architecture-specific users directly (via the cs5535_gpio_* functions). Tested on an OLPC machine. Some Leemotes also use CS5536 (with a mips cpu), which is why this is in drivers/gpio rather than arch/x86. Currently, it conflicts with older geode GPIO support; once MFGPT support is reworked to also be more generic, the older geode code will be removed. Signed-off-by: Andres Salomon <dilinger@collabora.co.uk> Cc: Takashi Iwai <tiwai@suse.de> Cc: Jordan Crouse <jordan@cosmicpenguin.net> Cc: David Brownell <david-b@pacbell.net> Reviewed-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* gpio: gpio support for ADP5520/ADP5501 MFD PMICsMichael Hennerich2009-09-231-0/+10
| | | | | | | | | Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* gpio: add Intel Moorestown Platform Langwell chip gpio driverAlek Du2009-09-231-0/+6
| | | | | | | | | | | | The Langwell chip is the IO hub for Intel Moorestown platform which has a 64-pin gpio block device inside. It is exposed as a dedicated PCI device. We use it to control outside peripheral as well as to do IRQ demuxing. The gpio block uses MSI to send level type interrupt to IOAPIC. Signed-off-by: Alek Du <alek.du@intel.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mfd/gpio: add a GPIO interface to the UCB1400 MFD chip driver via gpiolibMarek Vasut2009-09-231-0/+12
| | | | | | | | | Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: David Brownell <david-b@pacbell.net> Cc: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* gpio: add MC33880 driverRichard Röjfors2009-09-231-0/+7
| | | | | | | | | A GPIO driver for the Freescale MC33880 High/Low side switch Signed-off-by: Richard Röjfors <richard.rojfors.ext@mocean-labs.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* gpio: Add WM831X GPIO driverMark Brown2009-09-171-0/+7
| | | | | | | | | | | | | | | | Add support for the GPIO pins on the WM831x. No direct support is currently supplied for configuring non-gpiolib functionality such as pull configuration and alternate functions, soft configuration of these will be provided in a future patch. Currently use of these pins as interrupts is not supported due to the ongoing issues with generic irq not support interrupt controllers on interrupt driven buses. Users can directly request the interrupts with the wm831x-specific APIs currently provided if required. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* MIPS: Update VR41xx GPIO driver to use gpiolibYoichi Yuasa2009-07-031-0/+6
| | | | | Signed-off-by: Yoichi Yuasa <yyuasa@linux.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* gpio: driver for PrimeCell PL061 GPIO controllerBaruch Siach2009-06-191-0/+6
| | | | | | | | | | | | | | This is a driver for the ARM PrimeCell PL061 GPIO AMBA peripheral. The driver is implemented using the gpiolib framework. This driver also includes support for the use of the PL061 as an interrupt controller (secondary). Signed-off-by: Baruch Siach <baruch@tkos.co.il> Cc: David Brownell <david-b@pacbell.net> Acked-by: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* microblaze: Kconfig: Enable drivers for MicroblazeMichal Simek2009-05-211-1/+1
| | | | Signed-off-by: Michal Simek <monstr@monstr.eu>
* trivial: fix typos/grammar errors in Kconfig textsMatt LaPlante2009-03-301-3/+3
| | | | | | Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* gpio: pca953x handles more chips, i2c fault codesDavid Brownell2009-01-061-3/+4
| | | | | | | | | | | Minor updates to the pca953x GPIO expander driver: handle several more compatible parts, and stop assuming that the I2C layer's return codes are garbage (that's now been fixed). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Eric Miao <eric.miao@marvell.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* GPIO: add new Xilinx driver for powerpcJohn Linn2008-11-121-0/+8
| | | | | | | | | | | | | | | | This driver supports the Xilinx XPS GPIO IP core which has the typical GPIO features. Signed-off-by: Kiran Sutariya <kirans@xilinx.com> Signed-off-by: John Linn <john.linn@xilinx.com> Cc: David Brownell <david-b@pacbell.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@gate.crashing.org> Cc: "Grant Likely" <grant.likely@secretlab.ca> Cc: <avorontsov@ru.mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* mfd: twl4030-gpio driverDavid Brownell2008-10-221-0/+7
| | | | | | | | | | | | | | This adds basic support for the GPIOs in the twl4030 power management chip. That includes two open drain LED drivers, and the use of GPIO-0 (and GPIO-1) as MMC/SD card detect switches which can control whether the VMMC1 (and VMMC2) regulators are active. This version of the code has a debounce call that will probably be replaced before long, when a more generic interface exists. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
* gpio: max732x driverEric Miao2008-07-251-0/+19
| | | | | | | | | | | | | This adds a driver supporting a family of I2C port expanders from Maxim, which includes the MAX7319 and MAX7320-7327 chips. [dbrownell@users.sourceforge.net: minor fixes] Signed-off-by: Jack Ren <jack.ren@marvell.com> Signed-off-by: Eric Miao <eric.miao@marvell.com> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* gpiolib: allow user-selectionMichael Buesch2008-07-251-4/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds functionality to the gpio-lib subsystem to make it possible to enable the gpio-lib code even if the architecture code didn't request to get it built in. The archtitecture code does still need to implement the gpiolib accessor functions in its asm/gpio.h file. This patch adds the implementations for x86 and PPC. With these changes it is possible to run generic GPIO expansion cards on every architecture that implements the trivial wrapper functions. Support for more architectures can easily be added. Signed-off-by: Michael Buesch <mb@bu3sch.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: David Brownell <david-b@pacbell.net> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jean Delvare <khali@linux-fr.org> Cc: Samuel Ortiz <sameo@openedhand.com> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* gpio: add bt8xxgpio driverMichael Buesch2008-07-251-0/+18
| | | | | | | | | | | | | | | | | This adds the bt8xxgpio driver. The purpose of the bt8xxgpio driver is to export all of the 24 GPIO pins available on Brooktree 8xx chips to the kernel GPIO infrastructure. This makes it possible to use a physically modified BT8xx card as cheap digital GPIO card. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Michael Buesch <mb@bu3sch.de> Cc: David Brownell <david-b@pacbell.net> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
OpenPOWER on IntegriCloud