summaryrefslogtreecommitdiffstats
path: root/drivers/dma
Commit message (Collapse)AuthorAgeFilesLines
...
* | dmaengine: omap-dma: use cached CCR value when enabling DMARussell King2014-04-041-4/+2
| | | | | | | | | | | | | | | | | | | | We don't need to read-modify-write the CCR register; we already know what value it should contain at this point. Use the cached CCR value when setting the enable bit. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | dmaengine: omap-dma: move barrier to omap_dma_start_desc()Russell King2014-04-041-1/+7
| | | | | | | | | | | | | | | | | | We don't need to issue a barrier for every segment of a DMA transfer; doing this just once per descriptor will do. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | dmaengine: omap-dma: move clnk_ctrl setting to preparation functionsRussell King2014-04-041-14/+9
| | | | | | | | | | | | | | | | | | | | | | Move the clnk_ctrl setup to the preparation functions, saving its value in the omap_desc. This only needs to be set once per descriptor, not for each segment, so set it in omap_dma_start_desc() rather than omap_dma_start(). Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | dmaengine: omap-dma: improve efficiency loading C.SA/C.EI/C.FI registersRussell King2014-04-041-12/+20
| | | | | | | | | | | | | | | | | | The only thing which changes is which registers are written, so put this in local variables instead. This results in smaller code. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | dmaengine: omap-dma: consolidate clearing channel status registerRussell King2014-04-041-10/+10
| | | | | | | | | | | | | | | | | | Consolidate clearing of the channel status register, rather than open coding the same functionality in two places. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | dmaengine: omap-dma: move CCR buffering disable errata out of the fast pathRussell King2014-04-041-2/+5
| | | | | | | | | | | | | | | | | | | | Since we record the CCR register in the dma transaction, we can move the processing of the iframe buffering errata out of the omap_dma_start(). Move it to the preparation functions. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | dmaengine: omap-dma: provide register definitionsRussell King2014-04-041-54/+117
| | | | | | | | | | | | | | | | | | | | Provide our own set of more complete register definitions; this allows us to get rid of the meaningless 1 << n constants scattered throughout this code. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | dmaengine: omap-dma: consolidate setup of CCRRussell King2014-04-041-86/+61
| | | | | | | | | | | | | | | | | | | | Consolidate the setup of the channel control register. Prepare the basic value in the preparation of the DMA descriptor, and write it into the register upon descriptor execution. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | dmaengine: omap-dma: consolidate setup of CSDPRussell King2014-04-041-36/+28
| | | | | | | | | | | | | | | | | | | | | | Consolidate the setup of the channel source destination parameters register. This way, we calculate the required CSDP value when we setup a transfer descriptor, and only write it to the device registers once when we start the descriptor. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | dmaengine: omap-dma: move reading of dma position to omap-dma.cRussell King2014-04-041-2/+64
| | | | | | | | | | | | | | | | | | Read the current DMA position from the hardware directly rather than via arch/arm/plat-omap/dma.c. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | dmaengine: omap-dma: control start/stop directlyRussell King2014-04-041-10/+141
| | | | | | | | | | | | | | | | | | Program the non-cyclic mode DMA start/stop directly, rather than via arch/arm/plat-omap/dma.c. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | dmaengine: omap-dma: consolidate writes to DMA registersRussell King2014-04-041-75/+48
| | | | | | | | | | | | | | | | | | | | There's no need to keep writing registers which don't change value in omap_dma_start_sg(). Move this into omap_dma_start_desc() and merge the register updates together. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | dmaengine: omap-dma: program hardware directlyRussell King2014-04-041-16/+126
| | | | | | | | | | | | | | | | | | Program the transfer parameters directly into the hardware, rather than using the functions in arch/arm/plat-omap/dma.c. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | dmaengine: omap-dma: provide a hook to get the underlying DMA platform opsRussell King2014-04-041-0/+7
| | | | | | | | | | | | | | | | | | | | Provide and use a hook to obtain the underlying DMA platform operations so that omap-dma.c can access the hardware more directly without involving the legacy DMA driver. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | dmaengine: omap-dma: use devm_kzalloc() to allocate omap_dmadev.Russell King2014-04-041-2/+1
|/ | | | | | | | | Use devm_kzalloc() to allocate omap_dmadev() so that we don't need complex error cleanup paths. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds2014-01-2921-184/+1737
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull slave-dma updates from Vinod Koul: - new driver for BCM2835 used in R-pi - new driver for MOXA ART - dma_get_any_slave_channel API for DT based systems - minor fixes and updates spread acrooss driver [ The fsl-ssi dual fifo mode support addition clashed badly with the other changes to fsl-ssi that came in through the sound merge. I did a very rough cut at fixing up the conflict, but Nicolin Chen (author of both sides) will need to verify and check things ] * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (36 commits) dmaengine: mmp_pdma: fix mismerge dma: pl08x: Export pl08x_filter_id acpi-dma: align documentation with kernel-doc format dma: fix vchan_cookie_complete() debug print DMA: dmatest: extend the "device" module parameter to 32 characters drivers/dma: fix error return code dma: omap: Set debug level to debugging messages dmaengine: fix kernel-doc style typos for few comments dma: tegra: add support for Tegra148/124 dma: dw: use %pad instead of casting dma_addr_t dma: dw: join split up messages dma: dw: fix style of multiline comment dmaengine: k3dma: fix sparse warnings dma: pl330: Use dma_get_slave_channel() in the of xlate callback dma: pl330: Differentiate between submitted and issued descriptors dmaengine: sirf: Add device_slave_caps interface DMA: Freescale: change BWC from 256 bytes to 1024 bytes dmaengine: Add MOXA ART DMA engine driver dmaengine: Add DMA_PRIVATE to BCM2835 driver dma: imx-sdma: Assign a default script number for ROM firmware cases ...
| * dmaengine: mmp_pdma: fix mismergeArnd Bergmann2014-01-291-8/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The merge between 2b7f65b11d87f "mmp_pdma: Style neatening" and 8010dad55a0ab0 "dma: add dma_get_any_slave_channel(), for use in of_xlate()" caused a build error by leaving obsolete code in place: mmp_pdma.c: In function 'mmp_pdma_dma_xlate': mmp_pdma.c:909:31: error: 'candidate' undeclared mmp_pdma.c:912:3: error: label 'retry' used but not defined mmp_pdma.c:901:24: warning: unused variable 'c' [-Wunused-variable] This removes the extraneous lines. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * dma: pl08x: Export pl08x_filter_idSachin Kamat2014-01-281-0/+2
| | | | | | | | | | | | | | | | | | | | Export the symbol so that it is accessible to modules. Fixes the following error: ERROR: "pl08x_filter_id" [sound/soc/samsung/snd-soc-s3c-dma.ko] undefined! Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * acpi-dma: align documentation with kernel-doc formatAndy Shevchenko2014-01-261-12/+24
| | | | | | | | | | | | | | | | | | It mostly fixes the "RETURN" sections in the resulting manual page. There is no functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * dma: fix vchan_cookie_complete() debug printJonas Jensen2014-01-261-1/+3
| | | | | | | | | | | | | | | | vd->tx.cookie is set zero on dma_cookie_complete(), save to local before printing it. Signed-off-by: Jonas Jensen <jonas.jensen@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * DMA: dmatest: extend the "device" module parameter to 32 charactersGuennadi Liakhovetski2014-01-201-2/+2
| | | | | | | | | | | | | | | | | | | | With Device Tree a typical DMA controller device name can look like 10000000.dma-controller, which extends the current size of the string, allocated for this parameter. This patch extends its size from 20 to 32 characters. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * drivers/dma: fix error return codeJulia Lawall2014-01-202-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Set the return variable to an error code as done elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * dma: omap: Set debug level to debugging messagesEzequiel Garcia2014-01-201-2/+2
| | | | | | | | | | | | | | | | The channel allocated/released messages are just informative and not really interesting to users. Change them to "debug" level. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * dma: tegra: add support for Tegra148/124Laxman Dewangan2014-01-201-7/+55
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tegra148 introduces a few changes to the APB DMA HW registers. Update the driver to cope with them. Tegra124 inherits these changes. * The register address stride between DMA channels increases. * A new per-channel WCOUNT register is introduced. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Kunal Agrawal <kunala@nvidia.com> [swarren, remove .dts file change, rewrote commit description, removed some duplicate/unused code and register IO] Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * dma: dw: use %pad instead of casting dma_addr_tAndy Shevchenko2014-01-201-8/+6
| | | | | | | | | | | | | | | | Since we have nice helper to print dma_addr_t values by reference we may use it instead of explicit casting to a longest type. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * dma: dw: join split up messagesAndy Shevchenko2014-01-201-5/+4
| | | | | | | | | | | | | | | | | | The joined messages are better to grep when debugging. There is no functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * dma: dw: fix style of multiline commentAndy Shevchenko2014-01-201-4/+8
| | | | | | | | | | | | | | | | | | Simple fix a style of the multiline comment. There is no functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * dmaengine: k3dma: fix sparse warningsZhangfei Gao2014-01-201-2/+2
| | | | | | | | | | | | | | | | | | Fix sparse warnings: drivers/dma/k3dma.c:480:20: warning: Using plain integer as NULL pointer drivers/dma/k3dma.c:820:1: warning: symbol 'k3_dma_pmops' was not declared. Should it be static? Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * dma: pl330: Use dma_get_slave_channel() in the of xlate callbackLars-Peter Clausen2014-01-201-27/+8
| | | | | | | | | | | | | | | | | | | | | | Currently the driver uses dma_request_channel() with a custom filter function to find the requested channel. This will loop over all available channels until the one we want has been found, but we already know which channel we want to request, so we can dma_get_slave_channel(). This also makes the code a bit shorter cleaner. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * dma: pl330: Differentiate between submitted and issued descriptorsLars-Peter Clausen2014-01-201-4/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The pl330 dmaengine driver currently does not differentiate between submitted and issued descriptors. It won't start transferring a newly submitted descriptor until issue_pending() is called, but only if it is idle. If it is active and a new descriptor is submitted before it goes idle it will happily start the newly submitted descriptor once all earlier submitted descriptors have been completed. This is not a 100% correct with regards to the dmaengine interface semantics. A descriptor is not supposed to be started until the next issue_pending() call after the descriptor has been submitted. This patch adds a second per channel list that keeps track of the submitted descriptors. Once issue_pending() is called the submitted descriptors are moved to the working list and only descriptors on the working list are started. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * dmaengine: sirf: Add device_slave_caps interfaceRongjun Ying2014-01-201-0/+20
| | | | | | | | | | | | | | | | | | this patch adds device_slave_caps() callback as SiRF SoC sound drivers depend on it. Signed-off-by: Rongjun Ying <rongjun.ying@csr.com> Signed-off-by: Barry Song <Barry.Song@csr.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * DMA: Freescale: change BWC from 256 bytes to 1024 bytesHongbo Zhang2014-01-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Freescale DMA has a feature of BandWidth Control (ab. BWC), which is currently 256 bytes and should be changed to 1024 bytes for best DMA throughput. Changing BWC from 256 to 1024 will improve DMA performance much, in cases whatever one channel is running or multi channels are running simultanously, large or small buffers are copied. And this change doesn't impact memory access performance remarkably, lmbench tests show that for some cases the memory performance are decreased very slightly, while the others are even better. Tested on T4240. Signed-off-by: Hongbo Zhang <hongbo.zhang@freescale.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * dmaengine: Add MOXA ART DMA engine driverJonas Jensen2014-01-203-0/+708
| | | | | | | | | | | | | | | | | | | | | | | | The MOXA ART SoC has a DMA controller capable of offloading expensive memory operations, such as large copies. This patch adds support for the controller including four channels. Two of these are used to handle MMC copy on the UC-7112-LX hardware. The remaining two can be used in a future audio driver or client application. Signed-off-by: Jonas Jensen <jonas.jensen@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * dmaengine: Add DMA_PRIVATE to BCM2835 driverFlorian Meier2014-01-201-0/+1
| | | | | | | | | | | | | | | | | | | | | | Without DMA_PRIVATE the driver is not able to allocate more than one channel. Since it uses dma_get_any_slave_channel that calls private_candidate, the second allocation fails at /* some channels are already publicly allocated */ Maybe it should be fixed in the core, but at least this fixes the bug. Signed-off-by: Florian Meier <florian.meier@koalo.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * dma: imx-sdma: Assign a default script number for ROM firmware casesNicolin Chen2014-01-131-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | i.MX series have inner firmware in its ROM code: when SDMA isn't provided any firmware from Kernel or rootfs, the default inner ROM firmware will be activated. However the current driver doesn't assign any script number to this situation, and those platform running in this case would be broken. Thus this patch adds a default script number when no external firmware being loaded so that people would continue to be able to use basic scripts to run their platform without any firmware. Reported-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * dma:mmp_tdma: get sram pool through device treeNenghua Cao2014-01-091-4/+18
| | | | | | | | | | | | | | | | | | | | Support to get sram pool from generic device tree binding. The existing way of get sram poll, directly call sram_get_gpool(), still work here. Signed-off-by: Nenghua Cao <nhcao@marvell.com> Acked-by: Zhangfei Gao <zhangfei.gao@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * dmaengine: Add support for BCM2835Florian Meier2014-01-073-0/+713
| | | | | | | | | | | | | | | | | | | | Add support for DMA controller of BCM2835 as used in the Raspberry Pi. Currently it only supports cyclic DMA. Signed-off-by: Florian Meier <florian.meier@koalo.de> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * Merge branch 'topic/of' into for-linusVinod Koul2014-01-072-13/+32
| |\ | | | | | | | | | | | | | | | | | | Conflicts: drivers/dma/mmp_pdma.c Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * \ Merge branch 'topic/defer_probe' into for-linusVinod Koul2014-01-072-10/+40
| |\ \
| * | | dma: pl08x: allow zero slave channelsLinus Walleij2013-12-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It might happen that a platform wants to use its DMA engine for memcpy only, and then we have zero slave channels to initialize, so allow the slave initialization to return zero. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * | | dma: edma: Set debug level to debugging messagesEzequiel Garcia2013-12-181-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The channel allocated/released messages are very spammy and not really interesting to users. Change them to "debug" level. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Acked-by: Matt Porter <mporter@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * | | dmaengine: mmp: fix uninitialized variableVinod Koul2013-12-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | drivers/dma/mmp_tdma.c:236:8: warning: 'tdcr' may be used uninitialized in this function [-Wuninitialized] Reported-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * | | dmaengine: mmp_tdma: fix the 'pointer from integer' warningsVinod Koul2013-12-161-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | the driver is using unsigned long type for storing the channel register base "reg_base", this leads to bunch of warns when we try to use this as pointer. So better use an iomem pointer type for this variable drivers/dma/mmp_tdma.c: In function 'mmp_tdma_chan_set_desc': drivers/dma/mmp_tdma.c:143: warning: passing argument 2 of '__raw_writel' makes pointer from integer without a cast drivers/dma/mmp_tdma.c:144: warning: passing argument 1 of '__raw_readl' makes pointer from integer without a cast drivers/dma/mmp_tdma.c:144: warning: passing argument 2 of '__raw_writel' makes pointer from integer without a cast drivers/dma/mmp_tdma.c: In function 'mmp_tdma_enable_chan': drivers/dma/mmp_tdma.c:151: warning: passing argument 2 of '__raw_writel' makes pointer from integer without a cast drivers/dma/mmp_tdma.c:153: warning: passing argument 1 of '__raw_readl' makes pointer from integer without a cast drivers/dma/mmp_tdma.c:153: warning: passing argument 2 of '__raw_writel' makes pointer from integer without a cast drivers/dma/mmp_tdma.c: In function 'mmp_tdma_disable_chan': drivers/dma/mmp_tdma.c:160: warning: passing argument 1 of '__raw_readl' makes pointer from integer without a cast drivers/dma/mmp_tdma.c:160: warning: passing argument 2 of '__raw_writel' makes pointer from integer without a cast drivers/dma/mmp_tdma.c:164: warning: passing argument 2 of '__raw_writel' makes pointer from integer without a cast drivers/dma/mmp_tdma.c: In function 'mmp_tdma_resume_chan': drivers/dma/mmp_tdma.c:171: warning: passing argument 1 of '__raw_readl' makes pointer from integer without a cast drivers/dma/mmp_tdma.c:171: warning: passing argument 2 of '__raw_writel' makes pointer from integer without a cast drivers/dma/mmp_tdma.c: In function 'mmp_tdma_pause_chan': drivers/dma/mmp_tdma.c:178: warning: passing argument 1 of '__raw_readl' makes pointer from integer without a cast drivers/dma/mmp_tdma.c:178: warning: passing argument 2 of '__raw_writel' makes pointer from integer without a cast drivers/dma/mmp_tdma.c: In function 'mmp_tdma_config_chan': drivers/dma/mmp_tdma.c:263: warning: passing argument 2 of '__raw_writel' makes pointer from integer without a cast drivers/dma/mmp_tdma.c: In function 'mmp_tdma_clear_chan_irq': drivers/dma/mmp_tdma.c:269: warning: passing argument 1 of '__raw_readl' makes pointer from integer without a cast drivers/dma/mmp_tdma.c:274: warning: passing argument 2 of '__raw_writel' makes pointer from integer without a cast Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * | | mmp_pdma: Style neateningJoe Perches2013-12-161-99/+105
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Neaten code used as a template for other drivers. Make the code more consistent with kernel styles. o Convert #defines with (1<<foo) to BIT(foo) o Alignment wrapping o Logic inversions to put return at end of functions o Convert devm_kzalloc with multiply to devm_kcalloc o typo of Peripheral fix Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * | | dma: imx-sdma: Add new dma type for ssi dual fifo scriptNicolin Chen2013-12-161-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a new DMA_TYPE for SSI dual FIFO script, included in SDMA firmware version 2. This script would allow SSI use dual fifo mode to transimit/receive data without occasional hardware underrun/overrun. Signed-off-by: Nicolin Chen <b42378@freescale.com> Acked-by: Kumar Gala <galak@codeaurora.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * | | dma: imx-sdma: Add sdma firmware version 2 supportNicolin Chen2013-12-161-1/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On i.MX5/6 series, SDMA is using new version firmware to support SSI dual FIFO feature and HDMI Audio (i.MX6Q/DL only). Thus add it. Signed-off-by: Nicolin Chen <b42378@freescale.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * | | dma: pl330: Alloc dma_parms for the dma deviceLars-Peter Clausen2013-12-161-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to be able to set a maximum segment size for the device we need to allocate a dma_parameters struct for the device first. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* | | | Merge tag 'dt-for-linus' of ↵Linus Torvalds2014-01-231-0/+4
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC DT updates from Olof Johansson: "DT and DT-conversion-related changes for various ARM platforms. Most of these are to enable various devices on various boards, etc, and not necessarily worth enumerating. New boards and systems continue to come in as new devicetree files that don't require corresponding C changes any more, which is indicating that the system is starting to work fairly well. A few things worth pointing out: * ST Ericsson ux500 platforms have made the major push to move over to fully support the platform with DT * Renesas platforms continue their conversion over from legacy platform devices to DT-based for hardware description" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (327 commits) ARM: dts: SiRF: add pin group for USP0 with only RX or TX frame sync ARM: dts: SiRF: add lost usp1_uart_nostreamctrl pin group for atlas6 ARM: dts: sirf: add lost minigpsrtc device node ARM: dts: sirf: add clock, frequence-voltage table for CPU0 ARM: dts: sirf: add lost bus_width, clock and status for sdhci ARM: dts: sirf: add lost clocks for cphifbg ARM: dts: socfpga: add pl330 clock ARM: dts: socfpga: update L2 tag and data latency arm: sun7i: cubietruck: Enable the i2c controllers ARM: dts: add support for EXYNOS4412 based TINY4412 board ARM: dts: Add initial support for Arndale Octa board ARM: bcm2835: add USB controller to device tree ARM: dts: MSM8974: Add MMIO architected timer node ARM: dts: MSM8974: Add restart node ARM: dts: sun7i: external clock outputs ARM: dts: sun7i: Change 32768 Hz oscillator node name to clk@N style ARM: dts: sun7i: Add pin muxing options for clock outputs ARM: dts: sun7i: Add rtp controller node ARM: dts: sun5i: Add rtp controller node ARM: dts: sun4i: Add rtp controller node ...
| * \ \ \ Merge branch 'tegra/dma-reset-rework' into next/dtOlof Johansson2013-12-264-39/+121
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Bringing in the tegra dma/reset framework cleanup as a base for the DT changes. * tegra/dma-reset-rework: (320 commits) spi: tegra: checking for ERR_PTR instead of NULL ASoC: tegra: update module reset list for Tegra124 clk: tegra: remove bogus PCIE_XCLK clk: tegra: remove legacy reset APIs ARM: tegra: remove legacy DMA entries from DT ARM: tegra: remove legacy clock entries from DT USB: EHCI: tegra: use reset framework Input: tegra-kbc - use reset framework serial: tegra: convert to standard DMA DT bindings serial: tegra: use reset framework spi: tegra: convert to standard DMA DT bindings spi: tegra: use reset framework staging: nvec: use reset framework i2c: tegra: use reset framework ASoC: tegra: convert to standard DMA DT bindings ASoC: tegra: allocate AHUB FIFO during probe() not startup() ASoC: tegra: call pm_runtime APIs around register accesses ASoC: tegra: use reset framework dma: tegra: register as an OF DMA controller dma: tegra: use reset framework ... Signed-off-by: Olof Johansson <olof@lixom.net>
| * | | | | dma: ste_dma40: Parse flags property for new 'high priority channel' requestLee Jones2013-11-261-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is used for MSP (audio) devices which is about to be fully DT:ed. Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
OpenPOWER on IntegriCloud