summaryrefslogtreecommitdiffstats
path: root/drivers/bluetooth/hci_uart.h
Commit message (Collapse)AuthorAgeFilesLines
* Bluetooth: hci_uart: Add new line discipline enhancementsIlya Faenson2015-06-171-0/+7
| | | | | | | | | Added the ability to flow control the UART, improved the UART baud rate setting, transferred the speeds into line discipline from the protocol and introduced the tty init function. Signed-off-by: Ilya Faenson <ifaenson@broadcom.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: hci_uart: Support operational speed during setupFrederic Danis2015-06-061-0/+4
| | | | | | | | | Add initial and operational speeds. Change to operational speed as soon as possible. If controller set_baudrate() fails, continue at initial speed. Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: hci_uart: Use generic Intel support for address settingMarcel Holtmann2015-04-071-4/+0
| | | | | | | | | The Bluetooth address setting for Intel devices is provided by a generic module now. Start using that module instead of relying it being included in the driver. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* Bluetooth: hci_uart: Provide generic H:4 receive frameworkMarcel Holtmann2015-04-071-1/+32
| | | | | | | | | | | | Future H:4 based UART drivers require custom packet types and custom receive functions. To support this, extended the h4_recv_buf function with a packet definition table. For the default H:4 packets types of ACL data, SCO data and events, provide helpers to reduce the amount of code duplication. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* Bluetooth: hci_uart: Add protocol support for Broadcom UART devicesMarcel Holtmann2015-04-071-0/+5
| | | | | | | | | | This adds the protocol support for Broadcom based UART devices to enable firmware and patchram download procedure. It is a pretty straight forward H:4 driver with the exception of actually having its own setup and address configuration callbacks. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* Bluetooth: hci_uart: Move setup callback into different locationMarcel Holtmann2015-04-071-1/+1
| | | | | | | | The setup callback got wrongly inserted between the enqueue and dequeue callbacks. Move it to a better location. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* Bluetooth: hci_uart: Use generic functionality from Broadcom moduleMarcel Holtmann2015-04-071-4/+0
| | | | | | | | | The new Broadcom Bluetooth support module provides generic functionality for changing and checking the Bluetooth device address. Use these new features instead of keeping a duplicate in the driver. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* Bluetooth: hci_uart: Add name information to hci_uart_proto structMarcel Holtmann2015-04-071-0/+1
| | | | | | | | This adds an extra name field to the hci_uart_proto struct that provides a simple way of adding a string identifier to the protocol. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* Bluetooth: hci_uart: Make struct hci_uart_proto always constMarcel Holtmann2015-04-071-3/+3
| | | | | | | | The usage of struct hci_uart_proto should always be const. Change the function headers and individual protocol drivers. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* Bluetooth: hci_uart: Introduce h4_recv_buf helper functionMarcel Holtmann2015-04-071-0/+3
| | | | | | | | | The h4_recv_buf helper function can be used for receiving H:4 packets out of a TTY stream. It is self-contained and allows for reuse by all HCI UART protocols. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* Bluetooth: hci_uart: Use const data pointer for received dataMarcel Holtmann2015-04-071-1/+1
| | | | | | | | | | The TTY layer provides its data pointers as const, but the HCI UART callbacks expect them as general data pointers. This is of course wrong and instead of casting them, just fix the individual drivers to actually take a const data pointer. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* Bluetooth: hci_uart: Add support Broadcom address configurationMarcel Holtmann2015-04-071-1/+6
| | | | | | | | When using vendor detection, this adds support for the Broadcom specific address configuration command. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* Bluetooth: hci_uart: Add support Intel address configurationMarcel Holtmann2015-04-071-1/+6
| | | | | | | | When using vendor detection, this adds support for the Intel specific address configuration command. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* Bluetooth: hci_uart: Add support for vendor detection flagMarcel Holtmann2015-04-071-0/+1
| | | | | | | | | | | | | | | This adds a new HCI_UART_VND_DETECT flag to allow automatic vendor detection. This allows to enable known vendor commands (for example for setting the public device address) when using a standard H:4 UART protocol or when running in virtual machines. When this new flag is configured and no vendor specific setup routine is provided, then the local version information are read and the provided manufacturer information can be evaluated to configure extra vendor callbacks. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* Bluetooth: hci_uart: Add setup callbackLoic Poulain2015-03-251-0/+1
| | | | | | | | | Some Bluetooth controllers require initialization before being used (vendor config, firmware download). Add possibility for a HCI UART proto to implement this early init via the setup callback. Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Add support for external configuration with UART driverMarcel Holtmann2014-07-111-0/+1
| | | | | | | | | The quirk for enabling external configuration with UART needs to be provided via the HCI UART flags. Add a new flag for it and declare it as valid. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* bluetooth: hci_ldisc: fix deadlock conditionFelipe Balbi2014-04-241-0/+1
| | | | | | | | | | | | | | | | | LDISCs shouldn't call tty->ops->write() from within ->write_wakeup(). ->write_wakeup() is called with port lock taken and IRQs disabled, tty->ops->write() will try to acquire the same port lock and we will deadlock. Acked-by: Marcel Holtmann <marcel@holtmann.org> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Reported-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Tested-by: Andreas Bießmann <andreas@biessmann.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Bluetooth: Add delayed init sequence support for UART controllersJohan Hedberg2012-07-171-0/+5
| | | | | | | | | | This patch makes it possible to have UART drivers perform an internal initialization before calling hci_register_dev. This allows moving a lot of init code from user space (hciattach) to the kernel side, thereby creating a more controlled/robust initialization process. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
* Bluetooth: Initial skeleton for Three-wire UART (H5) supportJohan Hedberg2012-07-171-0/+5
| | | | | | | | This patch adds the initial skeleton for Three-wire UART (H5) support and hooks it up to the HCI UART framework. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
* Bluetooth: Add support for creating HCI UART based AMP controllersMarcel Holtmann2012-02-241-0/+1
| | | | | | | | In reality this might never be used for real hardware, but it is a nice feature for emulating AMP controllers within a virtual machine. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* Bluetooth: Allow HCI UART reset parameter via flags ioctlMarcel Holtmann2012-02-241-0/+1
| | | | | | | | | The flags ioctl for HCI UART drivers already allows setting of certain Bluetooth core quirks. The reset parameter fits right in here. So allow this as well. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* Bluetooth: Support for Atheros AR300x serial chipSuraj Sumangala2010-07-211-1/+7
| | | | | | | | | | Implements Atheros AR300x serial HCI protocol. This protocol extends H4 serial protocol to implement enhanced power management features supported by Atheros AR300x serial Bluetooth chipsets. Signed-off-by: Suraj Sumangala <suraj@atheros.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Bluetooth: Add HCIUARTSETFLAGS and HCIUARTGETFLAGS ioctlsJohan Hedberg2010-07-211-1/+6
| | | | | | | | | | | This patch introduces two new ioctls: HCIUARTSETFLAGS and HCIUARTGETFLAGS. The only flag available for now is HCI_UART_RAW_DEVICE which allows to initialize a UART device into RAW mode from userspace. This is particularly useful for experimenting with Bluetooth controllers that don't yet have proper support in BlueZ. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* [Bluetooth] Add UART driver for Texas Instruments' BRF63xx chipsOhad Ben-Cohen2007-10-221-1/+7
| | | | | | | | | Add support for Texas Instruments' HCI Low Level (HCILL) Bluetooth protocol, which is a power management extension to H4. The HCILL is widely used by TI's BRF63xx Bluetooth chips. Signed-off-by: Ohad Ben-Cohen <ohad@bencohen.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* [Bluetooth] Add HCIUARTGETDEVICE support for HCI line disciplineMarcel Holtmann2007-05-101-2/+3
| | | | | | | | | Adding HCIUARTGETDEVICE makes it possible to get the HCI device number that is attached to a given serial device. This is required during the initialization process of some Bluetooth chips. Signed-off-by: Ohad Ben-Cohen <ohad@bencohen.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* [Bluetooth] Cleanup of the HCI UART driverMarcel Holtmann2005-10-281-40/+44
| | | | | | | | This patch contains the big cleanup of the HCI UART driver. The uneeded header files are removed and their structure declarations are moved into the protocol implementations. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds2005-04-161-0/+82
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
OpenPOWER on IntegriCloud