summaryrefslogtreecommitdiffstats
path: root/drivers/ata
Commit message (Collapse)AuthorAgeFilesLines
* sata_fsl: Split hard and soft resetJiang Yutang2009-11-191-40/+44
| | | | | | | | | | | | | | | Split sata_fsl_softreset() into hard and soft resets to make error-handling more efficient & device and PMP detection more reliable. Also includes fix for PMP support, driver tested with Sil3726, Sil4726 & Exar PMP controllers. [AV: Also fixes resuming from deep sleep on MPC8315 CPUs] Signed-off-by: Jiang Yutang <b14898@freescale.com> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* sata_via: Remove redundant device ID for VIA VT8261JosephChan@via.com.tw2009-11-031-1/+0
| | | | | | | | | Just remove redundant device ID for VIA VT8261. The device ID 0x9000 and 0x9040 are redundant (for VT8261). The 0x9040 is reserved for other usage. Signed-off-by: Joseph Chan <josephchan@via.com.tw> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* drivers/ata/libata: Move dereference after NULL testJulia Lawall2009-11-031-3/+6
| | | | | | | | | | | | | | | | | | | | | | In each case, if the NULL test on qc is needed, then the derefernce should be after the NULL test. A simplified version of the semantic match that detects this problem is as follows (http://coccinelle.lip6.fr/): // <smpl> @match exists@ expression x, E; identifier fld; @@ * x->fld ... when != \(x = E\|&x\) * x == NULL // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* ahci: Enable SB600 64bit DMA on MSI K9A2 Platinum v2Mark Nelson2009-11-031-5/+35
| | | | | | | | | Like the Asus M2A-VM, MSI's K9A2 Platinum (MS-7376) can also support 64bit DMA. It is a new enough board that all the BIOS releases work correctly with 64bit DMA enabled. Signed-off-by: Mark Nelson <mdnelson8@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* sata_mv: Prevent PIO commands to be defered too long if traffic in progress.Gwendal Grignou2009-10-161-2/+27
| | | | | | | | | Use excl_link when non NCQ commands are defered, to be sure they are processed as soon as outstanding commands are completed. It prevents some commands to be defered indifinitely when using a port multiplier. Signed-off-by: Gwendal Grignou <gwendal@google.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* pata_sc1200: Fix crash on bootAlan Cox2009-10-161-2/+1
| | | | | | | | | | | | The SC1200 needs a NULL terminator or it may cause a crash on boot. Bug #14227 Also correct a bogus comment as the driver had serializing added so can run dual port. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* libata: fix internal command failure handlingTejun Heo2009-10-161-5/+7
| | | | | | | | | | | | | | | | | | When an internal command fails, it should be failed directly without invoking EH. In the original implemetation, this was accomplished by letting internal command bypass failure handling in ata_qc_complete(). However, later changes added post-successful-completion handling to that code path and the success path is no longer adequate as internal command failure path. One of the visible problems is that internal command failure due to timeout or other freeze conditions would spuriously trigger WARN_ON_ONCE() in the success path. This patch updates failure path such that internal command failure handling is contained there. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* libata: fix PMP initializationTejun Heo2009-10-161-2/+4
| | | | | | | | | | | | | | | | | | | | | | | Commit 842faa6c1a1d6faddf3377948e5cf214812c6c90 fixed error handling during attach by not committing detected device class to dev->class while attaching a new device. However, this change missed the PMP class check in the configuration loop causing a new PMP device to go through ata_dev_configure() as if it were an ATA or ATAPI device. As PMP device doesn't have a regular IDENTIFY data, this makes ata_dev_configure() tries to configure a PMP device using an invalid data. For the most part, it wasn't too harmful and went unnoticed but this ends up clearing dev->flags which may have ATA_DFLAG_AN set by sata_pmp_attach(). This means that SATA_PMP_FEAT_NOTIFY ends up being disabled on PMPs and on PMPs which honor the flag breaks hotplug support. This problem was discovered and reported by Ethan Hsiao. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Ethan Hsiao <ethanhsiao@jmicron.com> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* sata_nv: make sure link is brough up online when skipping hardresetTejun Heo2009-10-161-3/+15
| | | | | | | | | | | | | | | | | | prereset doesn't bring link online if hardreset is about to happen and nv_hardreset() may skip if conditions are not right so softreset may be entered with non-working link status if the system firmware didn't bring it up before entering OS code which can happen during resume. This patch makes nv_hardreset() to bring up the link if it's skipping reset. This bug was reported by frodone@gmail.com in the following bug entry. http://bugzilla.kernel.org/show_bug.cgi?id=14329 Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: frodone@gmail.com Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* ahci / atiixp / pci quirks: rename AMD SB900 into Hudson-2Shane Huang2009-10-162-2/+2
| | | | | | | This patch renames the code name SB900 into Hudson-2 Signed-off-by: Shane Huang <shane.huang@amd.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* ahci: Add the AHCI controller Linux Device ID for NVIDIA chipsets.peer chen2009-10-161-0/+1
| | | | | | | Add the generic device ID for NVIDIA AHCI controller. Signed-off-by: Peer Chen <peerchen@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* pata_via: extend the rev_max for VT6330JosephChan@via.com.tw2009-10-161-1/+1
| | | | | | | | Fix the VT6330 issue, it's because the rev_max of VT6330 exceeds 0x2f. The VT6415 and VT6330 share the same device ID. Signed-off-by: Joseph Chan <josephchan@via.com.tw> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* ahci: Add ifdef wrapper to ahci_gtf_filter_workaroundMarkus Trippelsdorf2009-10-091-0/+5
| | | | | | | | | | | | Commit f80ae7e45a0e03da188494c6e947a5c8b0cdfb4a ahci: filter FPDMA non-zero offset enable for Aspire 3810T breaks the current git build for configurations that don't define CONFIG_ATA_ACPI. This adds an ifdef wrapper to ahci_gtf_filter_workaround. Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* pata_atp867x: add Power Management supportBartlomiej Zolnierkiewicz2009-10-061-0/+21
| | | | | | Cc: Jung-Ik (John) Lee <jilee@google.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* pata_atp867x: PIO support fixesBartlomiej Zolnierkiewicz2009-10-061-17/+19
| | | | | | | | | | | * use 8 clk setting for active clocks == 7 (was 12 clk) * use 12 clk setting for active clocks > 12 (was 8 clk) * do 66MHz bus fixup before mapping active clocks * fix setup of PIO command timings Acked-by: Jung-Ik (John) Lee <jilee@google.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* pata_atp867x: clarifications in timings calculations and cable detectionJohn(Jung-Ik) Lee2009-10-061-14/+38
| | | | | | Signed-off-by: John(Jung-Ik) Lee <jilee@google.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* pata_atp867x: fix it to not claim MWDMA supportBartlomiej Zolnierkiewicz2009-10-061-9/+1
| | | | | | | | MWDMA modes are not supported by this driver currently. Acked-by: Jung-Ik (John) Lee <jilee@google.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* libata: fix incorrect link online check during probeTejun Heo2009-10-061-18/+32
| | | | | | | | | | | | | | | | | | | While trying to work around spurious detection retries for non-existent devices on slave links, commit 816ab89782ac139a8b65147cca990822bb7e8675 incorrectly added link offline check logic before ata_eh_thaw() was called. This means that if an occupied link goes down briefly at the time that offline check was performed, device class will be cleared to ATA_DEV_NONE and libata wouldn't retry thus failing detection of the device. The offline check should be done after the port is thawed together with online check so that such link glitches can be detected by the interrupt handler and handled properly. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Tim Blechmann <tim@klingt.org> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* ahci: filter FPDMA non-zero offset enable for Aspire 3810TTejun Heo2009-10-061-0/+47
| | | | | | | | | | | | | | | | | | | | | | Curiously, Aspire 3810T issues many SATA feature enable commands via _GTF, of which one is invalid and another is not supported by the drive. In the process, it also enables FPDMA non-zero offset. However, the feature also needs to be supported and enabled from the controller and it's wrong to enable it from _GTF unless the controller can do it by default. Currently, this ends up enabling FPDMA non-zero offset only on the drive side leading to NCQ command failures and eventual disabling of NCQ. This patch makes libata filter out FPDMA non-zero offset enable for the machine. This was reported by Marcus Meissner in bnc#522790. https://bugzilla.novell.com/show_bug.cgi?id=522790 Reported-by: Marcus Meissner <meissner@novell.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* libata: make gtf_filter per-devTejun Heo2009-10-063-8/+14
| | | | | | | | | Add ->gtf_filter to ata_device and set it to ata_acpi_gtf_filter when initializing ata_link. This is to allow quirks which apply different gtf filters. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* libata: implement more acpi filtering optionsTejun Heo2009-10-061-4/+15
| | | | | | | | | Currently libata-acpi can only filter DIPM among SATA feature enables via _GTF. This patch adds the capability to filter out FPDMA non-zero offset, in-order guarantee and auto-activation. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* libata: cosmetic updatesTejun Heo2009-10-061-10/+0
| | | | | | | | We're about to add more SATA_* and ATA_ACPI_FILTER_* constants. Reformat them in preparation. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* ahci: display all AHCI 1.3 HBA capability flags (v2)Robert Hancock2009-10-061-20/+66
| | | | | | | | | | | | | | | | | | | | | | | Update the AHCI driver to display all of the HBA capabilities defined in the AHCI 1.3 specification. Some of these are in a new CAP2 (HBA Capabilities Extended) register which is only defined on AHCI 1.2 or later. The spec says that undefined registers should always return 0 on read, but to be safe we assume a value of 0 unless the controller reports AHCI version 1.2 or later. The value can also be retrieved through sysfs as with the existing capability field. For example, on an Intel Ibex Peak (PCH) controller: ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems sxs apst We don't do anything special with the new flags yet. Also, change the code that displays the flags to use the same bit enumerations that are used to control actual operation. Signed-off-by: Robert Hancock <hancockrwd@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* pata_ali: trivial fix of a very frequent spelling mistakeDirk Hohndel2009-10-061-1/+1
| | | | | | | | | | | | something-bility is spelled as something-blity so a grep for 'blit' would find these lines I broke this one out from the rest as it actually changes the output of a kernel message - so it could in theory change the behavior of tools that parse that ouput Signed-off-by: Dirk Hohndel <hohndel@infradead.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* ahci: disable 64bit DMA by default on SB600sTejun Heo2009-10-061-40/+20
| | | | | | | | | | | | | | Till now only one board, ASUS M2A-VM, can do 64bit dma with recent BIOSen. Enabling 64bit DMA by default already broke three boards. Enabling 64bit DMA isn't worth these regressions. Disable 64bit DMA by default and enable it only on boards which are known to work. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Gabriele Balducci <balducci@units.it> Reported-by: maierp@informatik.tu-muenchen.de Cc: Shane Huang <shane.huang@amd.com> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* trivial: fix comment typo in drivers/ata/pata_hpt37x.cKrzysztof Halasa2009-09-211-1/+1
| | | | | | | A comment fix in drivers/ata/pata_hpt37x.c. Signed-off-by: Krzysztof Ha³asa <khc@pm.waw.pl> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* libata: Add pata_atp867x driver for Artop/Acard ATP867X controllersJohn(Jung-Ik) Lee2009-09-173-0/+558
| | | | | | | | | | | This is a new pata driver for ARTOP 867X 64bit 4-channel UDMA133 ATA ctrls. Based on the Atp867 data sheet rev 1.2, Acard, and in part on early ide codes from Eric Uhrhane <ericu@google.com>. Signed-off-by: John(Jung-Ik) Lee <jilee@google.com> Reviewed-by: Grant Grundler <grundler@google.com> Reviewed-by: Gwendal Gringo <gwendal@google.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* pata_amd: do not filter out valid modes in nv_mode_filterRobert Hancock2009-09-171-0/+3
| | | | | | | | | | | | | | | | | | | | | | On a Compaq Presario V3000 laptop (NVIDIA MCP51 chipset), pata_amd selects PIO0 mode for the PATA DVD-RAM drive instead of MWDMA2 which it supports: ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-4084N, KQ09, max MWDMA2 ata4: nv_mode_filter: 0x39f&0x7001->0x1, BIOS=0x0 (0x0) ACPI=0x7001 (60:600:0x11) ata4.00: configured for PIO0 For some reason, the BIOS-set UDMA configuration returns 0 and the ACPI _GTM reports that UDMA2 and PIO0 are enabled. This causes nv_mode_filter to end up allowing only PIO0 and UDMA0-2. Since the drive doesn't support UDMA we end up using PIO0. Since the controllers should always support PIO4, MWDMA2 and UDMA2 regardless of what cable type is used, let's make sure we don't filter out these modes regardless of what wacky settings the BIOS is using. Signed-off-by: Robert Hancock <hancockrwd@gmail.com> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* sata_promise: update reset codeMikael Pettersson2009-09-171-1/+120
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sata_promise's reset code has deviated quite a bit from the Promise reference driver's, and it has been observed to fail to recover from errors in some cases. This patch thus updates the reset code to more closely match the reference driver: - soft reset (pdc_reset_port): * wait for ATA engine to not be in packet command mode (2nd gen only) * write reset bit in PDC_CTLSTAT before the first read in the loop * for 2nd gen SATA follow up with FPDMA reset and clearing error status registers - hard reset (pdc_sata_hardreset): * wait for ATA engine to not be in packet command mode (2nd gen only) * reset ATA engine via the PCI control register * Tejun's change to use non-waiting hardreset + follow-up SRST I'm not changing the hotplug mask bits since they are taken care of by sata_promise's ->freeze() and ->thaw() operations. And I'm not writing the PMP port # because that's always zero (for now). Tested here on various controllers. In particular, one disk which used to timeout and fail to recover from certain hdparm and smartmonctl commands now works nicely. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* sata_promise: disable hotplug on 1st gen chipsMikael Pettersson2009-09-171-17/+17
| | | | | | | | | | | | | | | | | 1st generation Promise SATA chips are prone to generating spurious hotplug events which can disrupt normal operation. This has been observed on 20376 and 20378 chips. This patch thus disables hotplug support on 1st gen chips while leaving it enabled for 2nd gen chips. The pdc_sata_hotplug_offset() function becomes redundant so it is removed. Tested on 1st gen 20376 and 20378 mainboard chips and on a 2nd gen SATA300 PCI card. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Tested-by: Kurt Roeckx <kurt@roeckx.be> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* libata: fix spurious WARN_ON_ONCE() on port freezeTejun Heo2009-09-171-2/+2
| | | | | | | | | | | | | Commit 54c38444fad6a99b4b19512f8f0055d69115e69e makes libata abort qcs after the port is frozen. This is necessary to guarantee that TF registers are accessed after the DMA engine is shutdown after an error. However, this triggers WARN_ON_ONCE() check in ata_qc_complete() spuriously. Move WARN_ON_ONCE() downwards such that failing commands while frozen doesn't trigger it. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable <stable@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* ahci: restore pci_intx() handlingTejun Heo2009-09-171-2/+2
| | | | | | | | | | | | | | | | | | | | Commit a5bfc4714b3f01365aef89a92673f2ceb1ccf246 dropped explicit pci_intx() manipulation from ahci because it seemed unnecessary and ahci doesn't seem to be the right place to be tweaking it if it were. This was largely okay but there are exceptions. There was one on an embedded platform which was fixed via firmware and now bko#14124 reports it on a HP DL320. http://bugzilla.kernel.org/show_bug.cgi?id=14124 I still think this isn't something libata drivers should be caring about (the only ones which are calling pci_intx() explicitly are libata ones and one other driver) but for now reverting the change seems to be the right thing to do. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Thomas Jarosch <thomas.jarosch@intra2net.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* pata_rz1000: use printk_onceMarcin Slusarz2009-09-111-3/+1
| | | | | Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* ahci: kill @force_restart and refine CLO for ahci_kick_engine()Shane Huang2009-09-111-12/+10
| | | | | | | | | | | | | This patch refines ahci_kick_engine() after discussion with Tejun about FBS(FIS-based switching) support preparation: a. Kill @force_restart and always kick the engine. The only case where @force_restart is zero is when it's called from ahci_p5wdh_hardreset() Actually at that point, BSY is pretty much guaranteed to be set. b. If PMP is attached, ignore busy and always do CLO. (AHCI-1.3 9.2) Signed-off-by: Shane Huang <shane.huang@amd.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* pata_cs5535: add pci id for AMD based CS5535 controllersOtavio Salvador2009-09-111-1/+2
| | | | | Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* ahci: Add AMD SB900 SATA/IDE controller device IDsShane Huang2009-09-112-0/+7
| | | | | | | Add AMD SB900 SATA/IDE controller device IDs. Signed-off-by: Shane Huang <shane.huang@amd.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* drivers/ata: use resource_sizeJulia Lawall2009-09-114-7/+7
| | | | | | | | | | | | | | | | | | | | | | Use the function resource_size, which reduces the chance of introducing off-by-one errors in calculating the resource size. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ struct resource *res; @@ - (res->end - res->start) + 1 + resource_size(res) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* sata_fsl: Defer non-ncq commands when ncq commands activeAshish Kalra2009-09-081-0/+1
| | | | | | | | | Fix for non-ncq & ncq commands causing timeouts when both are issued simultaneously to the same device. Signed-off-by: Ashish Kalra <Ashish.Kalra@freescale.com> [fixed to be actual compileable C code -jg] Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* libata: add SATA PMP revision information for spec 1.2Shane Huang2009-09-081-0/+2
| | | | | | | This small patch is just adding the information for PMP spec 1.2 Signed-off-by: Shane Huang <shane.huang@amd.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* libata: fix off-by-one error in ata_tf_read_block()Tejun Heo2009-09-081-1/+7
| | | | | | | | | | | | | ata_tf_read_block() has off-by-one error when converting CHS address to LBA. The bug isn't very visible because ata_tf_read_block() is used only when generating sense data for a failed RW command and CHS addressing isn't used too often these days. This problem was spotted by Atsushi Nemoto. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* ahci: Gigabyte GA-MA69VM-S2 can't do 64bit DMATejun Heo2009-09-081-0/+16
| | | | | | | | | | | | | | Gigabyte GA-MA69VM-S2 can't do 64bit DMA either. It's yet unknown whether recent BIOS fixes the problem. Blacklist regardless of BIOS revisions for now. Sandor Bodo-Merle reported and provided the initial patch for this issue. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Sandor Bodo-Merle <sbodomerle@gmail.com> Cc: Shane Huang <shane.huang@amd.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* ahci: make ahci_asus_m2a_vm_32bit_only() quirk more genericTejun Heo2009-09-081-24/+29
| | | | | | | | | | | | | It turns out ASUS M2A-VM isn't the only one with the 32bit DMA problem. Make ahci_asus_m2a_vm_32bit_only() more generic using the new dmi_get_date() and rename it to ahci_sb600_32bit_only(). Cut off date is now pointed to by dmi_system_id->driver_data in "yyyymmdd" format and it's now also allowed to be omitted. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Sandor Bodo-Merle <sbodomerle@gmail.com> Cc: Shane Huang <shane.huang@amd.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* dmi: extend dmi_get_year() to dmi_get_date()Tejun Heo2009-09-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | There are cases where full date information is required instead of just the year. Add month and day parsing to dmi_get_year() and rename it to dmi_get_date(). As the original function only required '/' followed by any number of parseable characters at the end of the string, keep that behavior to avoid upsetting existing users. The new function takes dates of format [mm[/dd]]/yy[yy]. Year, month and date are checked to be in the ranges of [1-9999], [1-12] and [1-31] respectively and any invalid or out-of-range component is returned as zero. The dummy implementation is updated accordingly but the return value is updated to indicate field not found which is consistent with how other dummy functions behave. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* libata: unbreak TPM filtering by reorganizing ata_scsi_pass_thru()Tejun Heo2009-09-081-53/+51
| | | | | | | | | | | | | | | | | | ata_scsi_pass_thru() was checking for input sanity and disallowed commands while initializaing qc from scmd. TPM filtering was added right after protocol check at which point tf wasn't initialized properly. This means that TPM filtering has never really worked. This patch fixes the bug by reorganizing ata_scsi_pass_thru() such that qc is fully initialized before checking for invalid conditions which is way less error prone. Discovered while Thilo-Alexander Ginkel was trying debug patches for bko#13416. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Thilo-Alexander Ginkel <thilo@ginkel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* sata_sis: convert to slave_linkTejun Heo2009-09-081-50/+25
| | | | | | | | | | | | | | | | | | | During introduction of slave_link, sata_sis slipped through the crack and left with ad-hoc merged SCR access. As SCR status was shared for both the master and slave devices, when only one of the device is online, libata EH would think both are online but would only get valid device signature for the actually present one, which in turn trigger the probing safety net mechanism and make EH retry causing large delay during boot. This patch converts sata_sis to slave_link mechanism. This bug was reported by TAXI in bko#14075. http://bugzilla.kernel.org/show_bug.cgi?id=14075 Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: TAXI <taxi@a-city.de> Cc: Uwe Koziolek <uwe.koziolek@gmx.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* sata_sil24: always set protocol override for non-ATAPI data commandsRobert Hancock2009-09-011-0/+11
| | | | | | | | | | | | | | | | | The sil24 hardware has a built-in list of commands and associated protocols that gets used by default to decide how to handle a given command. However, if the command is not known to the controller then it presumably assumes it to be a non-data command which then causes protocol mismatch errors if the device ends up requesting data transfer. The new DATA SET MANAGEMENT - Trim command causes this issue since it's a DMA data-out command. Since we should always know best what protocol the command should be using, let's just set the override flag to inform the controller what protocol to use for all non-ATAPI commands with data transfer. Signed-off-by: Robert Hancock <hancockrwd@gmail.com> Tested-by: Mark Lord <liml@rtr.ca> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* libata: Export AHCI capabilitiesMatthew Garrett2009-09-011-0/+44
| | | | | | | | | | AHCI exports various capability bits that may be of interest to userspace such as whether the BIOS claims a port is hotpluggable or eSATA. Providing these via sysfs along with the version of the AHCI spec implemented by the host allows userspace to make policy decisions for things like ALPM. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* libata: Delegate nonrot flag setting to SCSIMartin K. Petersen2009-09-011-4/+0
| | | | | | | | Now that the SCSI disk driver correctly handles non-rotational devices we can move setting the queue flag to SCSI. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* [libata] Add pata_rdc driver for RDC ATA devicesAlan Cox2009-09-013-0/+411
| | | | | | | From: Alan Cox <alan@linux.intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* drivers/ata: Remove unnecessary semicolonsJoe Perches2009-09-012-2/+2
| | | | | Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
OpenPOWER on IntegriCloud