summaryrefslogtreecommitdiffstats
path: root/block
Commit message (Collapse)AuthorAgeFilesLines
* block: fix blk_stack_limits() regression due to lcm() changeMike Snitzer2015-03-311-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Linux 3.19 commit 69c953c ("lib/lcm.c: lcm(n,0)=lcm(0,n) is 0, not n") caused blk_stack_limits() to not properly stack queue_limits for stacked devices (e.g. DM). Fix this regression by establishing lcm_not_zero() and switching blk_stack_limits() over to using it. DM uses blk_set_stacking_limits() to establish the initial top-level queue_limits that are then built up based on underlying devices' limits using blk_stack_limits(). In the case of optimal_io_size (io_opt) blk_set_stacking_limits() establishes a default value of 0. With commit 69c953c, lcm(0, n) is no longer n, which compromises proper stacking of the underlying devices' io_opt. Test: $ modprobe scsi_debug dev_size_mb=10 num_tgts=1 opt_blks=1536 $ cat /sys/block/sde/queue/optimal_io_size 786432 $ dmsetup create node --table "0 100 linear /dev/sde 0" Before this fix: $ cat /sys/block/dm-5/queue/optimal_io_size 0 After this fix: $ cat /sys/block/dm-5/queue/optimal_io_size 786432 Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org # 3.19+ Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@fb.com>
* Fix bug in blk_rq_merge_okWenbo Wang2015-03-201-1/+1
| | | | | | | | | | | Use the right array index to reference the last element of rq->biotail->bi_io_vec[] Signed-off-by: Wenbo Wang <wenbo.wang@memblaze.com> Reviewed-by: Chong Yuan <chong.yuan@memblaze.com> Fixes: 66cb45aa41315 ("block: add support for limiting gaps in SG lists") Cc: stable@kernel.org Signed-off-by: Jens Axboe <axboe@fb.com>
* blkmq: Fix NULL pointer deref when all reserved tags inSam Bradshaw2015-03-181-2/+4
| | | | | | | | | | | | | | | | | | | When allocating from the reserved tags pool, bt_get() is called with a NULL hctx. If all tags are in use, the hw queue is kicked to push out any pending IO, potentially freeing tags, and tag allocation is retried. The problem is that blk_mq_run_hw_queue() doesn't check for a NULL hctx. So we avoid it with a simple NULL hctx test. Tested by hammering mtip32xx with concurrent smartctl/hdparm. Signed-off-by: Sam Bradshaw <sbradshaw@micron.com> Signed-off-by: Selvan Mani <smani@micron.com> Fixes: b32232073e80 ("blk-mq: fix hang in bt_get()") Cc: stable@kernel.org Added appropriate comment. Signed-off-by: Jens Axboe <axboe@fb.com>
* blk-mq: fix use of incorrect goto label in blk_mq_init_queue error pathMike Snitzer2015-03-131-3/+3
| | | | | | | | | | If percpu_ref_init() fails the allocated q and hctxs must get cleaned up; using 'err_map' doesn't allow that to happen. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Ming Lei <ming.lei@canonical.com> Cc: stable@kernel.org Signed-off-by: Jens Axboe <axboe@fb.com>
* blk-throttle: check stats_cpu before reading it from sysfsThadeu Lima de Souza Cascardo2015-02-201-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When reading blkio.throttle.io_serviced in a recently created blkio cgroup, it's possible to race against the creation of a throttle policy, which delays the allocation of stats_cpu. Like other functions in the throttle code, just checking for a NULL stats_cpu prevents the following oops caused by that race. [ 1117.285199] Unable to handle kernel paging request for data at address 0x7fb4d0020 [ 1117.285252] Faulting instruction address: 0xc0000000003efa2c [ 1137.733921] Oops: Kernel access of bad area, sig: 11 [#1] [ 1137.733945] SMP NR_CPUS=2048 NUMA PowerNV [ 1137.734025] Modules linked in: bridge stp llc kvm_hv kvm binfmt_misc autofs4 [ 1137.734102] CPU: 3 PID: 5302 Comm: blkcgroup Not tainted 3.19.0 #5 [ 1137.734132] task: c000000f1d188b00 ti: c000000f1d210000 task.ti: c000000f1d210000 [ 1137.734167] NIP: c0000000003efa2c LR: c0000000003ef9f0 CTR: c0000000003ef980 [ 1137.734202] REGS: c000000f1d213500 TRAP: 0300 Not tainted (3.19.0) [ 1137.734230] MSR: 9000000000009032 <SF,HV,EE,ME,IR,DR,RI> CR: 42008884 XER: 20000000 [ 1137.734325] CFAR: 0000000000008458 DAR: 00000007fb4d0020 DSISR: 40000000 SOFTE: 0 GPR00: c0000000003ed3a0 c000000f1d213780 c000000000c59538 0000000000000000 GPR04: 0000000000000800 0000000000000000 0000000000000000 0000000000000000 GPR08: ffffffffffffffff 00000007fb4d0020 00000007fb4d0000 c000000000780808 GPR12: 0000000022000888 c00000000fdc0d80 0000000000000000 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 000001003e120200 c000000f1d5b0cc0 0000000000000200 0000000000000000 GPR24: 0000000000000001 c000000000c269e0 0000000000000020 c000000f1d5b0c80 GPR28: c000000000ca3a08 c000000000ca3dec c000000f1c667e00 c000000f1d213850 [ 1137.734886] NIP [c0000000003efa2c] .tg_prfill_cpu_rwstat+0xac/0x180 [ 1137.734915] LR [c0000000003ef9f0] .tg_prfill_cpu_rwstat+0x70/0x180 [ 1137.734943] Call Trace: [ 1137.734952] [c000000f1d213780] [d000000005560520] 0xd000000005560520 (unreliable) [ 1137.734996] [c000000f1d2138a0] [c0000000003ed3a0] .blkcg_print_blkgs+0xe0/0x1a0 [ 1137.735039] [c000000f1d213960] [c0000000003efb50] .tg_print_cpu_rwstat+0x50/0x70 [ 1137.735082] [c000000f1d2139e0] [c000000000104b48] .cgroup_seqfile_show+0x58/0x150 [ 1137.735125] [c000000f1d213a70] [c0000000002749dc] .kernfs_seq_show+0x3c/0x50 [ 1137.735161] [c000000f1d213ae0] [c000000000218630] .seq_read+0xe0/0x510 [ 1137.735197] [c000000f1d213bd0] [c000000000275b04] .kernfs_fop_read+0x164/0x200 [ 1137.735240] [c000000f1d213c80] [c0000000001eb8e0] .__vfs_read+0x30/0x80 [ 1137.735276] [c000000f1d213cf0] [c0000000001eb9c4] .vfs_read+0x94/0x1b0 [ 1137.735312] [c000000f1d213d90] [c0000000001ebb38] .SyS_read+0x58/0x100 [ 1137.735349] [c000000f1d213e30] [c000000000009218] syscall_exit+0x0/0x98 [ 1137.735383] Instruction dump: [ 1137.735405] 7c6307b4 7f891800 409d00b8 60000000 60420000 3d420004 392a63b0 786a1f24 [ 1137.735471] 7d49502a e93e01c8 7d495214 7d2ad214 <7cead02a> e9090008 e9490010 e9290018 And here is one code that allows to easily reproduce this, although this has first been found by running docker. void run(pid_t pid) { int n; int status; int fd; char *buffer; buffer = memalign(BUFFER_ALIGN, BUFFER_SIZE); n = snprintf(buffer, BUFFER_SIZE, "%d\n", pid); fd = open(CGPATH "/test/tasks", O_WRONLY); write(fd, buffer, n); close(fd); if (fork() > 0) { fd = open("/dev/sda", O_RDONLY | O_DIRECT); read(fd, buffer, 512); close(fd); wait(&status); } else { fd = open(CGPATH "/test/blkio.throttle.io_serviced", O_RDONLY); n = read(fd, buffer, BUFFER_SIZE); close(fd); } free(buffer); exit(0); } void test(void) { int status; mkdir(CGPATH "/test", 0666); if (fork() > 0) wait(&status); else run(getpid()); rmdir(CGPATH "/test"); } int main(int argc, char **argv) { int i; for (i = 0; i < NR_TESTS; i++) test(); return 0; } Reported-by: Ricardo Marin Matinata <rmm@br.ibm.com> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@fb.com>
* Merge branch 'for-3.20/drivers' of git://git.kernel.dk/linux-blockLinus Torvalds2015-02-121-47/+25
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull block driver changes from Jens Axboe: "This contains: - The 4k/partition fixes for brd from Boaz/Matthew. - A few xen front/back block fixes from David Vrabel and Roger Pau Monne. - Floppy changes from Takashi, cleaning the device file creation. - Switching libata to use the new blk-mq tagging policy, removing code (and a suboptimal implementation) from libata. This will throw you a merge conflict, since a bug in the original libata tagging code was fixed since this code was branched. Trivial. From Shaohua. - Conversion of loop to blk-mq, from Ming Lei. - Cleanup of the io_schedule() handling in bsg from Peter Zijlstra. He claims it improves on unreadable code, which will cost him a beer. - Maintainer update or NDB, now handled by Markus Pargmann. - NVMe: - Optimization from me that avoids a kmalloc/kfree per IO for smaller (<= 8KB) IO. This cuts about 1% of high IOPS CPU overhead. - Removal of (now) dead RCU code, a relic from before NVMe was converted to blk-mq" * 'for-3.20/drivers' of git://git.kernel.dk/linux-block: xen-blkback: default to X86_32 ABI on x86 xen-blkfront: fix accounting of reqs when migrating xen-blkback,xen-blkfront: add myself as maintainer block: Simplify bsg complete all floppy: Avoid manual call of device_create_file() NVMe: avoid kmalloc/kfree for smaller IO MAINTAINERS: Update NBD maintainer libata: make sata_sil24 use fifo tag allocator libata: move sas ata tag allocation to libata-scsi.c libata: use blk taging NVMe: within nvme_free_queues(), delete RCU sychro/deferred free null_blk: suppress invalid partition info brd: Request from fdisk 4k alignment brd: Fix all partitions BUGs axonram: Fix bug in direct_access loop: add blk-mq.h include block: loop: don't handle REQ_FUA explicitly block: loop: introduce lo_discard() and lo_req_flush() block: loop: say goodby to bio block: loop: improve performance via blk-mq
| * block: Simplify bsg complete allPeter Zijlstra2015-02-041-47/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It took me a few tries to figure out what this code did; lets rewrite it into a more regular form. The thing that makes this one 'special' is the BSG_F_BLOCK flag, if that is not set we're not supposed/allowed to block and should spin wait for completion. The (new) io_wait_event() will never see a false condition in case of the spinning and we will therefore not block. Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jens Axboe <axboe@fb.com>
* | Merge branch 'for-3.20/core' of git://git.kernel.dk/linux-blockLinus Torvalds2015-02-1213-486/+372
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull core block IO changes from Jens Axboe: "This contains: - A series from Christoph that cleans up and refactors various parts of the REQ_BLOCK_PC handling. Contributions in that series from Dongsu Park and Kent Overstreet as well. - CFQ: - A bug fix for cfq for realtime IO scheduling from Jeff Moyer. - A stable patch fixing a potential crash in CFQ in OOM situations. From Konstantin Khlebnikov. - blk-mq: - Add support for tag allocation policies, from Shaohua. This is a prep patch enabling libata (and other SCSI parts) to use the blk-mq tagging, instead of rolling their own. - Various little tweaks from Keith and Mike, in preparation for DM blk-mq support. - Minor little fixes or tweaks from me. - A double free error fix from Tony Battersby. - The partition 4k issue fixes from Matthew and Boaz. - Add support for zero+unprovision for blkdev_issue_zeroout() from Martin" * 'for-3.20/core' of git://git.kernel.dk/linux-block: (27 commits) block: remove unused function blk_bio_map_sg block: handle the null_mapped flag correctly in blk_rq_map_user_iov blk-mq: fix double-free in error path block: prevent request-to-request merging with gaps if not allowed blk-mq: make blk_mq_run_queues() static dm: fix multipath regression due to initializing wrong request cfq-iosched: handle failure of cfq group allocation block: Quiesce zeroout wrapper block: rewrite and split __bio_copy_iov() block: merge __bio_map_user_iov into bio_map_user_iov block: merge __bio_map_kern into bio_map_kern block: pass iov_iter to the BLOCK_PC mapping functions block: add a helper to free bio bounce buffer pages block: use blk_rq_map_user_iov to implement blk_rq_map_user block: simplify bio_map_kern block: mark blk-mq devices as stackable block: keep established cmd_flags when cloning into a blk-mq request block: add blk-mq support to blk_insert_cloned_request() block: require blk_rq_prep_clone() be given an initialized clone request blk-mq: add tag allocation policy ...
| * | block: remove unused function blk_bio_map_sgChristoph Hellwig2015-02-111-29/+0
| | | | | | | | | | | | | | | Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
| * | block: handle the null_mapped flag correctly in blk_rq_map_user_iovChristoph Hellwig2015-02-111-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The tape drivers (and the sg driver in a special case that doesn't matter here) use the null_mapped flag to tell blk_rq_map_user to not copy around any data into or out of the bounce buffers. blk_rq_map_user_iov never got that treatment, which didn't matter until I refactored blk_rq_map_user to be implemented in terms of blk_rq_map_user_iov. Signed-off-by: Christoph Hellwig <hch@lst.de> Fixes: ddad8dd0a162 ("block: use blk_rq_map_user_iov to implement blk_rq_map_user") Signed-off-by: Jens Axboe <axboe@fb.com>
| * | blk-mq: fix double-free in error pathTony Battersby2015-02-111-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the allocation of bt->bs fails, then bt->map can be freed twice, once in blk_mq_init_bitmap_tags() -> bt_alloc(), and once in blk_mq_init_bitmap_tags() -> bt_free(). Fix by setting the pointer to NULL after the first free. Cc: <stable@vger.kernel.org> Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Jens Axboe <axboe@fb.com>
| * | block: prevent request-to-request merging with gaps if not allowedKeith Busch2015-02-111-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the queue has SG_GAPS set, we must not merge across an sg gap. This is caught for the bio case, but currently not for the more rare case of merging two requests directly. Signed-off-by: Keith Busch <keith.busch@intel.com> Cut the dm bits, those will go through the dm tree, and fixed the test_bit() test. Signed-off-by: Jens Axboe <axboe@fb.com>
| * | blk-mq: make blk_mq_run_queues() staticJens Axboe2015-02-101-5/+4
| | | | | | | | | | | | | | | | | | | | | | | | We no longer use it outside of blk-mq.c, so we can make it static and stop exporting it. Additionally, kill the 'async' argument, as there's only one used of it. Signed-off-by: Jens Axboe <axboe@fb.com>
| * | cfq-iosched: handle failure of cfq group allocationKonstantin Khlebnikov2015-02-091-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Cfq_lookup_create_cfqg() allocates struct blkcg_gq using GFP_ATOMIC. In cfq_find_alloc_queue() possible allocation failure is not handled. As a result kernel oopses on NULL pointer dereference when cfq_link_cfqq_cfqg() calls cfqg_get() for NULL pointer. Bug was introduced in v3.5 in commit cd1604fab4f9 ("blkcg: factor out blkio_group creation"). Prior to that commit cfq group lookup had returned pointer to root group as fallback. This patch handles this error using existing fallback oom_cfqq. Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Vivek Goyal <vgoyal@redhat.com> Fixes: cd1604fab4f9 ("blkcg: factor out blkio_group creation") Cc: stable@kernel.org Signed-off-by: Jens Axboe <axboe@fb.com>
| * | block: Quiesce zeroout wrapperMartin K. Petersen2015-02-051-19/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | blkdev_issue_zeroout() printed a warning if a device failed a discard or write same request despite advertising support for these. That's fine for SCSI since we'll disable these commands if we get an error back from the disk saying that they are not supported. And consequently the warning only gets printed once. There are other types of block devices that support discard, however, and these may return -EOPNOTSUPP for each command but leave discard enabled in the queue limits. This will cause a warning message for every blkdev_issue_zeroout() invocation. Remove the offending warning messages. Reported-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
| * | block: rewrite and split __bio_copy_iov()Dongsu Park2015-02-051-34/+56
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rewrite __bio_copy_iov using the copy_page_{from,to}_iter helpers, and split it into two simpler functions. This commit should contain only literal replacements, without functional changes. Cc: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Dongsu Park <dongsu.park@profitbricks.com> [hch: removed the __bio_copy_iov wrapper] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
| * | block: merge __bio_map_user_iov into bio_map_user_iovChristoph Hellwig2015-02-052-37/+21
| | | | | | | | | | | | | | | | | | | | | | | | And also remove the unused bdev argument. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
| * | block: merge __bio_map_kern into bio_map_kernChristoph Hellwig2015-02-051-33/+17
| | | | | | | | | | | | | | | | | | | | | | | | This saves a little code, and allow to simplify the error handling. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
| * | block: pass iov_iter to the BLOCK_PC mapping functionsKent Overstreet2015-02-053-111/+90
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make use of a new interface provided by iov_iter, backed by scatter-gather list of iovec, instead of the old interface based on sg_iovec. Also use iov_iter_advance() instead of manual iteration. This commit should contain only literal replacements, without functional changes. Cc: Christoph Hellwig <hch@infradead.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Doug Gilbert <dgilbert@interlog.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Signed-off-by: Kent Overstreet <kmo@daterainc.com> [dpark: add more description in commit message] Signed-off-by: Dongsu Park <dongsu.park@profitbricks.com> [hch: fixed to do a deep clone of the iov_iter, and to properly use the iov_iter direction] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
| * | block: add a helper to free bio bounce buffer pagesChristoph Hellwig2015-02-051-32/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The code sniplet to walk all bio_vecs and free their pages is opencoded in way to many places, so factor it into a helper. Also convert the slightly more complex cases in bio_kern_endio and __bio_copy_iov where we break the freeing from an existing loop into a separate one. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
| * | block: use blk_rq_map_user_iov to implement blk_rq_map_userChristoph Hellwig2015-02-052-176/+14
| | | | | | | | | | | | | | | | | | Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
| * | block: simplify bio_map_kernChristoph Hellwig2015-02-051-16/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Just open code the trivial mapping from a kernel virtual address to a bio instead of going through the complex user address mapping machinery. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
| * | block: keep established cmd_flags when cloning into a blk-mq requestKeith Busch2015-01-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | blk_mq_alloc_request() may establish REQ_MQ_INFLIGHT in addition to incrementing the hctx->nr_active count. Any cmd_flags that are established in the newly allocated clone request must be preserved in addition to the cmd_flags that are later copied over from the original request as part of blk_rq_prep_clone(). Otherwise, if REQ_MQ_INFLIGHT isn't set in the clone request the hctx->nr_active count won't get decremented via blk_mq_free_request(). The only consumer of blk_rq_prep_clone() is request-based DM, which uses blk_rq_init() prior to calling blk_rq_prep_clone() for the non-blk-mq case. Given the cloned request's cmd_flags will be 0 it is safe to OR them with the original request's cmd_flags for both the non-blk-mq and blk-mq cases. Reported-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
| * | block: add blk-mq support to blk_insert_cloned_request()Keith Busch2015-01-281-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | If the request passed to blk_insert_cloned_request() was allocated by a blk-mq device it must be submitted using blk_mq_insert_request(). Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
| * | block: require blk_rq_prep_clone() be given an initialized clone requestKeith Busch2015-01-281-2/+0
| |/ | | | | | | | | | | | | | | | | | | Prepare to allow blk_rq_prep_clone() to accept clone requests that were allocated from blk-mq request queues. As such the blk_rq_prep_clone() caller must first initialize the clone request. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
| * blk-mq: add tag allocation policyShaohua Li2015-01-233-17/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is the blk-mq part to support tag allocation policy. The default allocation policy isn't changed (though it's not a strict FIFO). The new policy is round-robin for libata. But it's a try-best implementation. If multiple tasks are competing, the tags returned will be mixed (which is unavoidable even with !mq, as requests from different tasks can be mixed in queue) Cc: Jens Axboe <axboe@fb.com> Cc: Tejun Heo <tj@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
| * block: support different tag allocation policyShaohua Li2015-01-231-8/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The libata tag allocation is using a round-robin policy. Next patch will make libata use block generic tag allocation, so let's add a policy to tag allocation. Currently two policies: FIFO (default) and round-robin. Cc: Jens Axboe <axboe@fb.com> Cc: Tejun Heo <tj@kernel.org> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
| * block: Remove annoying "unknown partition table" messageBoaz Harrosh2015-01-221-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | As Christoph put it: Can we just get rid of the warnings? It's fairly annoying as devices without partitions are perfectly fine and very useful. Me too I see this message every VM boot for ages on all my devices. Would love to just remove it. For me a partition-table is only needed for a booting BIOS, grub, and stuff. CC: Christoph Hellwig <hch@infradead.org> Signed-off-by: Boaz Harrosh <boaz@plexistor.com> Signed-off-by: Jens Axboe <axboe@fb.com>
| * block: Add discard flag to blkdev_issue_zeroout() functionMartin K. Petersen2015-01-212-5/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | blkdev_issue_discard() will zero a given block range. This is done by way of explicit writing, thus provisioning or allocating the blocks on disk. There are use cases where the desired behavior is to zero the blocks but unprovision them if possible. The blocks must deterministically contain zeroes when they are subsequently read back. This patch adds a flag to blkdev_issue_zeroout() that provides this variant. If the discard flag is set and a block device guarantees discard_zeroes_data we will use REQ_DISCARD to clear the block range. If the device does not support discard_zeroes_data or if the discard request fails we will fall back to first REQ_WRITE_SAME and then a regular REQ_WRITE. Also update the callers of blkdev_issue_zero() to reflect the new flag and make sb_issue_zeroout() prefer the discard approach. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
| * cfq-iosched: fix incorrect filing of rt async cfqqJeff Moyer2015-01-211-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hi, If you can manage to submit an async write as the first async I/O from the context of a process with realtime scheduling priority, then a cfq_queue is allocated, but filed into the wrong async_cfqq bucket. It ends up in the best effort array, but actually has realtime I/O scheduling priority set in cfqq->ioprio. The reason is that cfq_get_queue assumes the default scheduling class and priority when there is no information present (i.e. when the async cfqq is created): static struct cfq_queue * cfq_get_queue(struct cfq_data *cfqd, bool is_sync, struct cfq_io_cq *cic, struct bio *bio, gfp_t gfp_mask) { const int ioprio_class = IOPRIO_PRIO_CLASS(cic->ioprio); const int ioprio = IOPRIO_PRIO_DATA(cic->ioprio); cic->ioprio starts out as 0, which is "invalid". So, class of 0 (IOPRIO_CLASS_NONE) is passed to cfq_async_queue_prio like so: async_cfqq = cfq_async_queue_prio(cfqd, ioprio_class, ioprio); static struct cfq_queue ** cfq_async_queue_prio(struct cfq_data *cfqd, int ioprio_class, int ioprio) { switch (ioprio_class) { case IOPRIO_CLASS_RT: return &cfqd->async_cfqq[0][ioprio]; case IOPRIO_CLASS_NONE: ioprio = IOPRIO_NORM; /* fall through */ case IOPRIO_CLASS_BE: return &cfqd->async_cfqq[1][ioprio]; case IOPRIO_CLASS_IDLE: return &cfqd->async_idle_cfqq; default: BUG(); } } Here, instead of returning a class mapped from the process' scheduling priority, we get back the bucket associated with IOPRIO_CLASS_BE. Now, there is no queue allocated there yet, so we create it: cfqq = cfq_find_alloc_queue(cfqd, is_sync, cic, bio, gfp_mask); That function ends up doing this: cfq_init_cfqq(cfqd, cfqq, current->pid, is_sync); cfq_init_prio_data(cfqq, cic); cfq_init_cfqq marks the priority as having changed. Then, cfq_init_prio data does this: ioprio_class = IOPRIO_PRIO_CLASS(cic->ioprio); switch (ioprio_class) { default: printk(KERN_ERR "cfq: bad prio %x\n", ioprio_class); case IOPRIO_CLASS_NONE: /* * no prio set, inherit CPU scheduling settings */ cfqq->ioprio = task_nice_ioprio(tsk); cfqq->ioprio_class = task_nice_ioclass(tsk); break; So we basically have two code paths that treat IOPRIO_CLASS_NONE differently, which results in an RT async cfqq filed into a best effort bucket. Attached is a patch which fixes the problem. I'm not sure how to make it cleaner. Suggestions would be welcome. Signed-off-by: Jeff Moyer <jmoyer@redhat.com> Tested-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: stable@kernel.org Signed-off-by: Jens Axboe <axboe@fb.com>
| * blk-mq: fix false negative out-of-tags conditionJens Axboe2015-01-141-17/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The blk-mq tagging tries to maintain some locality between CPUs and the tags issued. The tags are split into groups of words, and the words may not be fully populated. When searching for a new free tag, blk-mq may look at partial words, hence it passes in an offset/size to find_next_zero_bit(). However, it does that wrong, the size must always be the full length of the number of tags in that word, otherwise we'll potentially miss some near the end. Another issue is when __bt_get() goes from one word set to the next. It bumps the index, but not the last_tag associated with the previous index. Bump that to be in the range of the new word. Finally, clean up __bt_get() and __bt_get_word() a bit and get rid of the goto in there, and the unnecessary 'wrap' variable. Signed-off-by: Jens Axboe <axboe@fb.com>
| * blk-mq: export blk_mq_freeze_queue()Jens Axboe2015-01-021-0/+1
| | | | | | | | | | | | | | Commit b4c6a028774b exported the start and unfreeze, but we need the regular blk_mq_freeze_queue() for the loop conversion. Signed-off-by: Jens Axboe <axboe@fb.com>
* | Merge branch 'for-3.20/bdi' of git://git.kernel.dk/linux-blockLinus Torvalds2015-02-121-1/+1
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull backing device changes from Jens Axboe: "This contains a cleanup of how the backing device is handled, in preparation for a rework of the life time rules. In this part, the most important change is to split the unrelated nommu mmap flags from it, but also removing a backing_dev_info pointer from the address_space (and inode), and a cleanup of other various minor bits. Christoph did all the work here, I just fixed an oops with pages that have a swap backing. Arnd fixed a missing export, and Oleg killed the lustre backing_dev_info from staging. Last patch was from Al, unexporting parts that are now no longer needed outside" * 'for-3.20/bdi' of git://git.kernel.dk/linux-block: Make super_blocks and sb_lock static mtd: export new mtd_mmap_capabilities fs: make inode_to_bdi() handle NULL inode staging/lustre/llite: get rid of backing_dev_info fs: remove default_backing_dev_info fs: don't reassign dirty inodes to default_backing_dev_info nfs: don't call bdi_unregister ceph: remove call to bdi_unregister fs: remove mapping->backing_dev_info fs: export inode_to_bdi and use it in favor of mapping->backing_dev_info nilfs2: set up s_bdi like the generic mount_bdev code block_dev: get bdev inode bdi directly from the block device block_dev: only write bdev inode on close fs: introduce f_op->mmap_capabilities for nommu mmap support fs: kill BDI_CAP_SWAP_BACKED fs: deduplicate noop_backing_dev_info
| * | fs: introduce f_op->mmap_capabilities for nommu mmap supportChristoph Hellwig2015-01-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since "BDI: Provide backing device capability information [try #3]" the backing_dev_info structure also provides flags for the kind of mmap operation available in a nommu environment, which is entirely unrelated to it's original purpose. Introduce a new nommu-only file operation to provide this information to the nommu mmap code instead. Splitting this from the backing_dev_info structure allows to remove lots of backing_dev_info instance that aren't otherwise needed, and entirely gets rid of the concept of providing a backing_dev_info for a character device. It also removes the need for the mtd_inodefs filesystem. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Tejun Heo <tj@kernel.org> Acked-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
* | | Merge branch 'x86-efi-for-linus' of ↵Linus Torvalds2015-02-091-1/+1
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI updates from Ingo Molnar: "Main changes: - Move efivarfs from the misc filesystem section to pseudo filesystem - Expose firmware platform size in sysfs - Improve robustness of get_memory_map() by removing assumptions on the size of efi_memory_desc_t. - various cleanups and fixes The biggest risk is the get_memory_map() change, which changes the way that both the arm64 and x86 EFI boot stub build the early memory map. There are no known regressions with it at the moment, BYMMV" * 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi: Don't look for chosen@0 node on DT platforms firmware: efi: Remove unneeded guid unparse efi/libstub: Call get_memory_map() to obtain map and desc sizes efi: Small leak on error in runtime map code efi: rtc-efi: Mark UIE as unsupported arm64/efi: efistub: Apply __init annotation efi: Expose underlying UEFI firmware platform size to userland efi: Rename efi_guid_unparse to efi_guid_to_str efi: Update the URLs for efibootmgr fs: Make efivarfs a pseudo filesystem, built by default with EFI
| * \ \ Merge tag 'efi-next' of ↵Ingo Molnar2015-01-291-1/+1
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi into x86/efi Pull EFI updates from Matt Fleming: " - Move efivarfs from the misc filesystem section to pseudo filesystem, since that's a more logical and accurate place - Leif Lindholm - Update efibootmgr URL in Kconfig help - Peter Jones - Improve accuracy of EFI guid function names - Borislav Petkov - Expose firmware platform size in sysfs for the benefit of EFI boot loader installers and other utilities - Steve McIntyre - Cleanup __init annotations for arm64/efi code - Ard Biesheuvel - Mark the UIE as unsupported for rtc-efi - Ard Biesheuvel - Fix memory leak in error code path of runtime map code - Dan Carpenter - Improve robustness of get_memory_map() by removing assumptions on the size of efi_memory_desc_t (which could change in future spec versions) and querying the firmware instead of guessing about the memmap size - Ard Biesheuvel - Remove superfluous guid unparse calls - Ivan Khoronzhuk - Delete unnecessary chosen@0 DT node FDT code since was duplicated from code in drivers/of and is entirely unnecessary - Leif Lindholm There's nothing super scary, mainly cleanups, and a merge from Ricardo who kindly picked up some patches from the linux-efi mailing list while I was out on annual leave in December. Perhaps the biggest risk is the get_memory_map() change from Ard, which changes the way that both the arm64 and x86 EFI boot stub build the early memory map. It would be good to have it bake in linux-next for a while. " Signed-off-by: Ingo Molnar <mingo@kernel.org>
| | * | | efi: Rename efi_guid_unparse to efi_guid_to_strBorislav Petkov2015-01-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Call it what it does - "unparse" is plain-misleading. Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
* | | | | blk-mq: release mq's kobjects in blk_release_queue()Ming Lei2015-01-293-7/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The kobject memory inside blk-mq hctx/ctx shouldn't have been freed before the kobject is released because driver core can access it freely before its release. We can't do that in all ctx/hctx/mq_kobj's release handler because it can be run before blk_cleanup_queue(). Given mq_kobj shouldn't have been introduced, this patch simply moves mq's release into blk_release_queue(). Reported-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
* | | | | Revert "blk-mq: fix hctx/ctx kobject use-after-free"Ming Lei2015-01-292-24/+7
|/ / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 76d697d10769048e5721510100bf3a9413a56385. The commit 76d697d10769048 causes general protection fault reported from Bart Van Assche: https://lkml.org/lkml/2015/1/28/334 Reported-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
* | | | blk-mq: fix hctx/ctx kobject use-after-freeMing Lei2015-01-202-7/+24
| |/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The kobject memory shouldn't have been freed before the kobject is released because driver core can access it freely before its release. This patch frees hctx in its release callback. For ctx, they share one single per-cpu variable which is associated with the request queue, so free ctx in q->mq_kobj's release handler. Signed-off-by: Sasha Levin <sasha.levin@oracle.com> (fix ctx kobjects) Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
* | | blk-mq: End unstarted requests on a dying queueKeith Busch2015-01-081-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Requests that haven't been started prior to a queue dying can be ended in error without waiting for them to start and time out. Signed-off-by: Keith Busch <keith.busch@intel.com> Added code comment to explain why this is done. Signed-off-by: Jens Axboe <axboe@fb.com>
* | | blk-mq: Allow requests to never expireKeith Busch2015-01-082-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | Some types of requests may be started that are not gauranteed to ever complete. This adds a request flag that a driver can use so mark the request as such. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
* | | blk-mq: Add helper to abort requeued requestsJens Axboe2015-01-081-0/+20
| | | | | | | | | | | | | | | | | | | | | Adds a helper function a driver can use to abort requeued requests in case any are pending when h/w queues are being removed. Signed-off-by: Jens Axboe <axboe@fb.com>
* | | blk-mq: Let drivers cancel requeue_workKeith Busch2015-01-081-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Kicking requeued requests will start h/w queues in a work_queue, which may alter the driver's requested state to temporarily stop them. This patch exports a method to cancel the q->requeue_work so a driver can be assured stopped h/w queues won't be started up before it is ready. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
* | | blk-mq: Export if requests were startedKeith Busch2015-01-081-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | Drivers can iterate over all allocated request tags, but their callback needs a way to know if the driver started the request in the first place. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
* | | blk-mq: Wake tasks entering queue on dyingKeith Busch2015-01-081-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the queue is set to dying, wake up tasks that are waiting on frozen queue so they realize it is dying and abandon their request. Signed-off-by: Keith Busch <keith.busch@intel.com> Modified by me to add a code comment on the need for the wakeup. Signed-off-by: Jens Axboe <axboe@fb.com>
* | | blk-mq: get rid of ->cmd_size in the hardware queueJens Axboe2015-01-071-1/+0
| |/ |/| | | | | | | | | | | | | | | We store it in the tag set, we don't need it in the hardware queue. While removing cmd_size, place ->queue_num further down to avoid a hole on 64-bit archs. It's not used in any fast paths, so we can safely move it. Signed-off-by: Jens Axboe <axboe@fb.com>
* | block: wake up waiters when a queue is marked dyingJens Axboe2014-12-315-5/+42
| | | | | | | | | | | | | | | | | | | | | | If it's dying, we can't expect new request to complete and come in an wake up other tasks waiting for requests. So after we have marked it as dying, wake up everybody currently waiting for a request. Once they wake, they will retry their allocation and fail appropriately due to the state of the queue. Tested-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
* | blk-mq: Export freeze/unfreeze functionsKeith Busch2014-12-201-2/+4
| | | | | | | | | | | | | | Let drivers prevent entering a queue that isn't available. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
* | blk-mq: Exit queue on alloc failureKeith Busch2014-12-201-1/+3
| | | | | | | | | | | | | | Fixes usage counter when a request could not be allocated. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
OpenPOWER on IntegriCloud