summaryrefslogtreecommitdiffstats
path: root/arch
Commit message (Collapse)AuthorAgeFilesLines
* ARM: dts: mxs: modify mx23/mx28 dts files to use pinctrl headersLothar Waßmann2013-09-2619-438/+440
| | | | | | | | | | | | | | | | | | Convert mx23/mx28 dts filed to use the pinctrl header files. NOTE: During automatic conversion of these files to use the pinconfig definitions an inconsistency has been found in: arch/arm/boot/dts/imx28-apx4devkit.dts According to the comment the function for pad SSP2_SS0 should have been MX28_PAD_SSP2_SS0__GPIO_2_19, while the given value 0x2131 represents: MX28_PAD_SSP2_SS0__AUART3_TX I used the later (though probably wrong) definition because that's what is actually being used in the DTB. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: mxs: add pinctrl header filesLothar Waßmann2013-09-263-0/+870
| | | | | | | | | | | | Remove the list of possible pin configurations from the documentation file and create header files containing those definitions. This eliminates the need for error-prone manual lookup of those values in the documentation and guarantees consistency between the human readable representation of the pad function in the .dts file and the actual binary value used in DT. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx28-evk: Enable touchscreen supportFabio Estevam2013-09-261-0/+1
| | | | | | | | Provide 'lradc-touchscreen-wires' property to the LRADC driver, so that touchscreen can be functional. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx6qdl-sabresd: SDHC ports are 8 bit-wideFabio Estevam2013-09-261-0/+2
| | | | | | | | | | On imx6qdl-sabresd the SDHC2 and SDHC3 are 8 bit-wide, so pass the bus-width property to reflect that. Otherwise the mmc driver will operate with the default bus-width value of 4. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx6qdl: add uhs pinctrl state for usdhc3Dong Aisheng2013-09-262-1/+34
| | | | | | | This is needed for supporting ultra high speed cards like SD3.0 cards. Signed-off-by: Dong Aisheng <b29396@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx6sl: Add spi aliasesFabio Estevam2013-09-261-5/+9
| | | | | | | | | Add spi aliases. While at it, keep the aliases entries sorted. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: imx: mx6sl-evk: Enable USB functionPeter Chen2013-09-262-2/+99
| | | | | | | | Enable USB function for OTG 1 and OTG 2 at mx6sololite evk. Besides, fix the wrong interrupt number for OTG2 and host 1. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: add iomuxc-gpr device node for imx6slFugang Duan2013-09-261-0/+5
| | | | | | | Add iomuxc gpr device node for imx6sl. Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: imx6qdl-wandboard: Add spdif supportFabio Estevam2013-09-262-0/+34
| | | | | | Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Nicolin Chen <b42378@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: vf610-twr: Enable DSPI0 devices and Flash at26df081aChao Fu2013-09-261-0/+17
| | | | | | | | This patch enables DSPI0 and at26df081a flash device for Vybrid VF610 TOWER board. Signed-off-by: Chao Fu <b44548@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: vf610: Add DSPI nodesChao Fu2013-09-261-0/+12
| | | | | | | Add Freescale DSPI node into vf610 dts. Signed-off-by: Chao Fu <b44548@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx6q-sabrelite: Add LVDS supportFabio Estevam2013-09-261-0/+25
| | | | | | | | | imx6q-sabrelite board can be connected to a 1024x768 Hannstar LVDS panel. Add support for it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx6q-sabrelite: Put the nodes in alphabetical orderFabio Estevam2013-09-261-39/+39
| | | | | | | | Put the nodes in alphabetical order so that further node additions can be better organized. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx53-qsb: Allow usb peripheral mode to workFabio Estevam2013-09-261-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Trying to use the usb otg port on mx53qsb results in the following error: $ modprobe g_ether using random self ethernet address using random host ethernet address usb0: HOST MAC 52:0f:8a:1e:aa:09 usb0: MAC de:f3:70:d8:6c:62 using random self ethernet address using random host ethernet address g_ether gadget: Ethernet Gadget, version: Memorial Day 2008 g_ether gadget: g_ether ready (Connect the USB cable) $ ci_hdrc ci_hdrc.0: remove, state 4 usb usb1: USB disconnect, device number 1 ci_hdrc ci_hdrc.0: USB bus 1 deregistered ci_hdrc ci_hdrc.0: timeout waiting for 00000800 in 11 USB otg port goes to connector J3 (mini USB) and also to the USB combo (J2). As mx53qsb does not provide a USB ID pin, pass the dr_mode as 'peripheral' so that we can have usb device working. Tested via g_ether. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx28-evk: Allow usb peripheral mode to workFabio Estevam2013-09-262-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Testing g_ether results in the following: [ 1.648022] using random self ethernet address [ 1.652778] using random host ethernet address [ 1.660504] usb0: HOST MAC c6:28:6a:81:dc:ff [ 1.666360] usb0: MAC 7e:81:54:16:c0:c6 [ 1.670504] using random self ethernet address [ 1.675842] using random host ethernet address [ 1.682655] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008 [ 1.689332] g_ether gadget: g_ether ready [ 3.328974] irq 237: nobody cared (try booting with the "irqpoll" option) [ 3.335831] CPU: 0 PID: 1 Comm: swapper Not tainted 3.11.0-rc6-next-20130819 #1035 [ 3.343500] [<c0014258>] (unwind_backtrace+0x0/0xf0) from [<c0011b20>] (show_stack+0x10/0x14) [ 3.352098] [<c0011b20>] (show_stack+0x10/0x14) from [<c006af4c>] (__report_bad_irq+0x20/0xc0) [ 3.360763] [<c006af4c>] (__report_bad_irq+0x20/0xc0) from [<c006b3f4>] (note_interrupt+0x1d4/0x234) [ 3.369943] [<c006b3f4>] (note_interrupt+0x1d4/0x234) from [<c0069754>] (handle_irq_event_percpu+0xc4/0x268) [ 3.379815] [<c0069754>] (handle_irq_event_percpu+0xc4/0x268) from [<c0069934>] (handle_irq_event+0x3c/0x5c) [ 3.389686] [<c0069934>] (handle_irq_event+0x3c/0x5c) from [<c006bb78>] (handle_level_irq+0x8c/0xe8) [ 3.398865] [<c006bb78>] (handle_level_irq+0x8c/0xe8) from [<c0068ff0>] (generic_handle_irq+0x20/0x30) [ 3.408213] [<c0068ff0>] (generic_handle_irq+0x20/0x30) from [<c000fc9c>] (handle_IRQ+0x30/0x84) [ 3.417040] [<c000fc9c>] (handle_IRQ+0x30/0x84) from [<c0012564>] (__irq_svc+0x44/0x54) [ 3.425094] [<c0012564>] (__irq_svc+0x44/0x54) from [<c0020244>] (__do_softirq+0x90/0x268) [ 3.433400] [<c0020244>] (__do_softirq+0x90/0x268) from [<c00207d4>] (irq_exit+0x9c/0xd8) [ 3.441619] [<c00207d4>] (irq_exit+0x9c/0xd8) from [<c000fca0>] (handle_IRQ+0x34/0x84) [ 3.449577] [<c000fca0>] (handle_IRQ+0x34/0x84) from [<c0012564>] (__irq_svc+0x44/0x54) [ 3.457629] [<c0012564>] (__irq_svc+0x44/0x54) from [<c04602b0>] (_raw_spin_unlock_irqrestore+0x34/0x44) [ 3.467164] [<c04602b0>] (_raw_spin_unlock_irqrestore+0x34/0x44) from [<c0348298>] (input_register_handler+0x98/0xb4) [ 3.477835] [<c0348298>] (input_register_handler+0x98/0xb4) from [<c064bc10>] (mousedev_init+0x30/0x60) [ 3.487275] [<c064bc10>] (mousedev_init+0x30/0x60) from [<c00088ac>] (do_one_initcall+0xe8/0x154) [ 3.496198] [<c00088ac>] (do_one_initcall+0xe8/0x154) from [<c062aabc>] (kernel_init_freeable+0xf0/0x1b4) [ 3.505810] [<c062aabc>] (kernel_init_freeable+0xf0/0x1b4) from [<c0456550>] (kernel_init+0x8/0xe4) [ 3.514899] [<c0456550>] (kernel_init+0x8/0xe4) from [<c000ee60>] (ret_from_fork+0x14/0x34) [ 3.523263] handlers: [ 3.525578] [<c0339d14>] ci_irq [ 3.528757] Disabling IRQ #237 Provide the USB0_ID pin in the usb0 node, so that g_ether can operate correctly. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx6qdl-wandboard: Add usbotg supportFabio Estevam2013-09-261-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Tested via g_ether: $ modprobe g_ether using random self ethernet address using random host ethernet address usb0: HOST MAC 42:b5:26:a9:48:21 usb0: MAC 36:a6:85:9b:9e:13 using random self ethernet address using random host ethernet address g_ether gadget: Ethernet Gadget, version: Memorial Day 2008 g_ether gadget: g_ether ready $ g_ether gadget: high-speed config #1: CDC Ethernet (ECM) $ ifconfig usb0 10.0.0.2 Then on the PC host side: ~$ sudo ifconfig usb0 10.0.0.1 ~$ ping 10.0.0.2 PING 10.0.0.2 (10.0.0.2) 56(84) bytes of data. 64 bytes from 10.0.0.2: icmp_req=1 ttl=64 time=1.26 ms 64 bytes from 10.0.0.2: icmp_req=2 ttl=64 time=0.280 ms 64 bytes from 10.0.0.2: icmp_req=3 ttl=64 time=0.297 ms Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: i.MX51: Add W1 devicetree nodeAlexander Shiyan2013-09-261-0/+8
| | | | | | | | This patch adds the missing W1 (onewire) devicetree node for i.MX51 CPUs. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: i.MX51: Add IRAM devicetree nodeAlexander Shiyan2013-09-261-0/+5
| | | | | | | | This patch adds the missing IRAM devicetree node for i.MX51 CPUs. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: i.MX51: Separate TXD/RXD and RTS/CTS pinmux entries for UARTsAlexander Shiyan2013-09-262-2/+12
| | | | | | | | | RTS/CTS pins can be used for different purposes, so create separate definitions for these pins. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* ARM: dts: imx6sl reuses imx6q sdma firmwareShawn Guo2013-09-261-1/+2
| | | | | | | There is no imx6sl specific sdma firmware. Instead, imx6sl reuses imx6q sdma firmware. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
* Merge tag 'pm+acpi-3.12-rc2' of ↵Linus Torvalds2013-09-205-6/+11
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management fixes from Rafael Wysocki: 1) Four fixes for cpufreq regressions introduced by the changes that removed Device Tree parsing for CPU device nodes from cpufreq drivers from Sudeep KarkadaNagesha. 2) Two fixes for recent cpufreq regressions introduced by changes related to the preservation of sysfs attributes over system suspend/resume cycles from Viresh Kumar. 3) Fix for ACPI-based wakeup signaling in the PCI subsystem that fails to stop PME polling for devices put into the D3cold power state from Rafael J Wysocki. 4) Fix for bad interactions between cpufreq and udev on systems supporting intel_pstate where acpi-cpufreq is available as well from Yinghai Lu. * tag 'pm+acpi-3.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: return EEXIST instead of EBUSY for second registering PCI / ACPI / PM: Clear pme_poll for devices in D3cold on wakeup ARM: shmobile: change dev_id to cpu0 while registering cpu clock ARM: i.MX: change dev_id to cpu0 while registering cpu clock cpufreq: imx6q-cpufreq: assign cpu_dev correctly to cpu0 device cpufreq: cpufreq-cpu0: assign cpu_dev correctly to cpu0 device cpufreq: unlock correct rwsem while updating policy->cpu cpufreq: Clear policy->cpus bits in __cpufreq_remove_dev_finish()
| * ARM: shmobile: change dev_id to cpu0 while registering cpu clockSudeep KarkadaNagesha2013-09-192-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently all clkdev registration use "cpufreq-cpu0.0" as dev_id for cpu clock which refers to virtual platform device. It needs to be "cpu0" instead which is actual cpu0 device id. This patch changes the dev_id from "cpufreq-cpu0.0" to "cpu0". Reported-and-tested-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Magnus Damm <damm@opensource.se> Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
| * ARM: i.MX: change dev_id to cpu0 while registering cpu clockSudeep KarkadaNagesha2013-09-192-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Currently all clkdev registration use "cpufreq-cpu0.0" as dev_id for cpu clock which refers to virtual platform device. It needs to be "cpu0" instead which is actual cpu0 device id. This patch changes the dev_id from "cpufreq-cpu0.0" to "cpu0". Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
| * cpufreq: imx6q-cpufreq: assign cpu_dev correctly to cpu0 deviceSudeep KarkadaNagesha2013-09-191-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit cdc58d602d2e657602a90c190cbf745886c95977 "cpufreq: imx6q-cpufreq: remove device tree parsing for cpu nodes" assumed the pdev->dev is set to cpu0 device in the platform code. But it actually points to the virtual cpufreq-cpu0 platform device which is not present in the device tree. Most of the information needed by cpufreq is stored in cpu0 DT node. So cpu_dev must point to cpu0 device. This patch fixes the wrong assignment to cpu_dev. Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | Merge tag 'arm64-stable' of ↵Linus Torvalds2013-09-204-8/+19
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64 Pull ARM64 fixes from Catalin Marinas: - Compat register fault reporting fix - Documentation clarification on tagged pointers - hwcap widened to 64-bit (user space already reading it as 64-bit) * tag 'arm64-stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: arm64: Widen hwcap to be 64 bit arm64: Correctly report LR and SP for compat tasks arm64: documentation: tighten up tagged pointer documentation arm64: Make do_bad_area() function static
| * | arm64: Widen hwcap to be 64 bitSteve Capper2013-09-202-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Under arm64 elf_hwcap is a 32 bit quantity, but it is stored in a 64 bit auxiliary ELF field and glibc reads hwcap as 64 bit. This patch widens elf_hwcap to be 64 bit. Signed-off-by: Steve Capper <steve.capper@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
| * | arm64: Correctly report LR and SP for compat tasksCatalin Marinas2013-09-201-5/+16
| | | | | | | | | | | | | | | | | | | | | | | | When a task crashes and we print debugging information, ensure that compat tasks show the actual AArch32 LR and SP registers rather than the AArch64 ones. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
| * | arm64: Make do_bad_area() function staticCatalin Marinas2013-09-201-1/+1
| |/ | | | | | | | | | | This function is only called from arch/arm64/mm/fault.c. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
* | Merge tag 'fixes-for-linus' of ↵Linus Torvalds2013-09-1925-281/+418
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A set of fixes for ARM platforms for 3.12. Among them: - A fix for build breakage in the MTD subsystem for some PXA devices. David Woodhouse has this patch in his for-next branch but has not been responding to our requests to send it up so here it is. I should have amended the commit message to describe the build failure for CONFIG_OF=n setups, but forgot and now it's down in the stack of commits. - Added device-tree for the BeagleBone Black. Turns out people have been using the older "regualar" bone DT for the newer boards, and there's risk of damaging hardware that way. - Misc DT and regular fixes for OMAP. - Fix to make the ST-Ericsson "snowball" boards boot with multi_v7_defconfig, and enable one of the ST-E reference boards on the same config. - Kconfig cleanup for u300 to hide submenus when the platform isn't enabled. - Enable ARM_ATAG_DTB_COMPAT to let firmware override command line when booting with an appended devicetree on non-DT-enabled firmware (needed to boot snowball)" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (26 commits) ARM: multi_v7: add HREFv60 to multi_v7 defconfig ARM: OMAP2+: mux: fix trivial typo in name ARM: OMAP4 SMP: Corrected a typo fucntions to functions ARM: OMAP4: cpuidle: fix: call cpu_cluster_pm_exit conditionally mailbox: remove unnecessary platform_set_drvdata() ARM: mach-omap2: gpmc: Fix warning when CONFIG_ARM_LPAE=y ARM: OMAP: fix return value check in omap_device_build_from_dt() ARM: OMAP4: Fix clock_get error for GPMC during boot ARM: sa1100: collie.c: fall back to jedec_probe flash detection ARM: u300: hide submenus ARM: dts: igep00x0: Add pinmux configuration for MCBSP2 ARM: dts: Fix muxing and regulator for wl12xx on the SDIO bus for blaze ARM: dts: Fix muxing and regulator for wl12xx on the SDIO bus for pandaboard mtd: nand: pxa3xx: Remove unneeded ifdef CONFIG_OF ARM: multi_v7_defconfig: enable ARM_ATAG_DTB_COMPAT ARM: ux500: disable outer cache debug ARM: dts: OMAP5: fix ocp2scp DTS data ARM: dts: OMAP5: fix reg property size ARM: dts: am335x-bone*: add DT for BeagleBone Black ARM: dts: omap3-beagle-xm: fix string error in compatible property ...
| * \ Merge tag 'omap-for-v3.12/fixes-dt-signed' of ↵Olof Johansson2013-09-189-261/+383
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren, OMAP DT fixes for 3.12-rc1: OMAP device tree changes that are needed to fix regressions and avoid electrical issues on beaglebone black. Via Benoit Cousson <bcousson@baylibre.com>: Fix BBB LDO voltage to avoid HDMI destruction Fix OMAP5 wrong attribute Fix typo in beagle xM strings Fix missing pinmux and regulator for OMAP4 wifi Fix missing pinmux for igep headset * tag 'omap-for-v3.12/fixes-dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: igep00x0: Add pinmux configuration for MCBSP2 ARM: dts: Fix muxing and regulator for wl12xx on the SDIO bus for blaze ARM: dts: Fix muxing and regulator for wl12xx on the SDIO bus for pandaboard ARM: dts: OMAP5: fix ocp2scp DTS data ARM: dts: OMAP5: fix reg property size ARM: dts: am335x-bone*: add DT for BeagleBone Black ARM: dts: omap3-beagle-xm: fix string error in compatible property Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | ARM: dts: igep00x0: Add pinmux configuration for MCBSP2Enric Balletbo i Serra2013-09-181-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add pinmux configuration for MCBSP2 connected to the TDM interface. With this configuration the Headset modules works as expected. Signed-off-by: Enric Balletbo i Serra <eballetbo@gmail.com> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
| | * | ARM: dts: Fix muxing and regulator for wl12xx on the SDIO bus for blazeTony Lindgren2013-09-181-1/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 76787b3b (ARM: OMAP2+: Remove board-4430sdp.c) removed legacy booting in favor of device tree based booting for 4430sdp. That caused the WLAN to stop working as the related .dts entries fell through the cracks. I don't have the "1283 PG 2.21 connectivity device" on my 4430sdp, but the earlier version of this patch was tested by Luciano Coelho. This version has left out the input logic for MMC CLK line compared to the earlier version as that is not bidirectional, and should be safe to do. Cc: Rajendra Nayak <rnayak@ti.com> Cc: Luciano Coelho <luca@coelho.fi> Cc: Ruslan Bilovol <ruslan.bilovol@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
| | * | ARM: dts: Fix muxing and regulator for wl12xx on the SDIO bus for pandaboardTony Lindgren2013-09-181-1/+45
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit b42b9181 (ARM: OMAP2+: Remove board-omap4panda.c) removed legacy booting in favor of device tree based booting for pandaboard. That caused the WLAN to stop working as the related .dts entries fell through the cracks. The legacy muxing was setting pulls for GPIO 48 and 49, so let's keep that behaviour for now to avoid further regressions for BT and FM. Also input logic was enabled for MMC CLK line, but I've verified that the input logic we don't need enabled for CLK line as it's not bidirectional. Also, we want to use non-removable instead of ti,non-removable as the ti,non-removable also sets no_regulator_off_init which is really not what we want as then wl12xx won't get powered up and down which is needed for resetting it. Note that looks like the WLAN interface fails to come up after a warm reset, but that most likely was also happening with the legacy booting and needs a separate fix. Cc: Paolo Pisati <p.pisati@gmail.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Luciano Coelho <luca@coelho.fi> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
| | * | ARM: dts: OMAP5: fix ocp2scp DTS dataFelipe Balbi2013-09-171-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the DTS data for ocp2scp node by adding the missing reg property. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
| | * | ARM: dts: OMAP5: fix reg property sizeFelipe Balbi2013-09-171-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | USB3 block has a 64KiB space, another 64KiB is used for the wrapper. Without this change, resource_size() will get confused and driver won't probe because size will be negative. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
| | * | ARM: dts: am335x-bone*: add DT for BeagleBone BlackKoen Kooi2013-09-174-255/+281
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The BeagleBone Black is basically a regular BeagleBone with eMMC and HDMI added, so create a common dtsi both can use. IMPORTANT: booting the existing am335x-bone.dts will blow up the HDMI transceiver after a dozen boots with an uSD card inserted because LDO will be at 3.3V instead of 1.8. MMC support for AM335x still isn't in, so only the LDO change has been added. Signed-off-by: Koen Kooi <koen@dominion.thruhere.net> Tested-by: Tom Rini <trini@ti.com> Tested-by: Matt Porter <matt.porter@linaro.org> Acked-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Tested-by: Joel Fernandes <joelf@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
| | * | ARM: dts: omap3-beagle-xm: fix string error in compatible propertyRobert Nelson2013-09-171-1/+1
| | |/ | | | | | | | | | | | | | | | | | | | | | The beagle and beagle-xm entries were inside the same double quote. Split them to have two distinct entries. Signed-off-by: Robert Nelson <robertcnelson@gmail.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
| * | Merge tag 'omap-for-v3.12/fixes-signed' of ↵Olof Johansson2013-09-186-7/+7
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren, fixes for 3.12-rc1: OMAP fixes for build warnings and cpuidle, and a few trivial typo fixes. * tag 'omap-for-v3.12/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: mux: fix trivial typo in name ARM: OMAP4 SMP: Corrected a typo fucntions to functions ARM: OMAP4: cpuidle: fix: call cpu_cluster_pm_exit conditionally mailbox: remove unnecessary platform_set_drvdata() ARM: mach-omap2: gpmc: Fix warning when CONFIG_ARM_LPAE=y ARM: OMAP: fix return value check in omap_device_build_from_dt() ARM: OMAP4: Fix clock_get error for GPMC during boot Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | ARM: OMAP2+: mux: fix trivial typo in namePhil Carmody2013-09-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix trivial typo in name. Signed-off-by: Phil Carmody <phil.carmody@partner.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | ARM: OMAP4 SMP: Corrected a typo fucntions to functionsAnoop Thomas Mathew2013-09-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Corrected the functions spelling mistake in the OMAP4 SMP source file. Signed-off-by: Anoop Thomas Mathew <atm@profoundis.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | ARM: OMAP4: cpuidle: fix: call cpu_cluster_pm_exit conditionallyVladimir Murzin2013-09-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We call cpu_cluster_pm_enter for dev->cpu == 0 only, but cpu_cluster_pm_exit called without that check. Because of that unhandled page fault may happen: [ 3.803405] Unable to handle kernel paging request at virtual address 00002500 [ 3.810974] pgd = c0004000 [ 3.813812] [00002500] *pgd=00000000 [ 3.817596] Internal error: Oops: 5 [#1] SMP ARM [ 3.822418] Modules linked in: [ 3.825653] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.11.0-rc6+ #21 [ 3.832397] task: ed86ef40 ti: ed896000 task.ti: ed896000 [ 3.838073] PC is at irq_notifier+0x234/0x25c [ 3.842651] LR is at irq_notifier+0x218/0x25c [ 3.847229] pc : [<c0029ed8>] lr : [<c0029ebc>] psr: 80000193 [ 3.847229] sp : ed897ee8 ip : 00000005 fp : 00000001 [ 3.859283] r10: c0b395f0 r9 : c0b30594 r8 : c0b8c2ac [ 3.864776] r7 : ffffffff r6 : 00000000 r5 : 00000005 r4 : 00000000 [ 3.871643] r3 : 00002500 r2 : 00000000 r1 : 00000005 r0 : 44302244 [ 3.878479] Flags: Nzcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel [ 3.886260] Control: 10c5387d Table: 8000404a DAC: 00000015 [ 3.892272] Process swapper/1 (pid: 0, stack limit = 0xed896240) [ 3.898590] Stack: (0xed897ee8 to 0xed898000) [ 3.903167] 7ee0: c0979c3a 00000001 ed897ef8 ed896000 c0014f7c 00000000 [ 3.911743] 7f00: 00000005 00000000 ffffffff c0b8c2ac c0b395f0 c077c04c c0c94b48 c0b3953c [ 3.920318] 7f20: c0bcd928 00000002 c0b39524 c00cfad8 00000000 ffffffff 00000000 c00cfb10 [ 3.928924] 7f40: c14e62c0 c002c1c8 c002c0ac c14e62c0 00000002 e251c37d 00000000 c0b39548 [ 3.937499] 7f60: c0b395f0 c05a1bc4 e251c37d 00000000 00000005 c05a3870 edc90380 edc90380 [ 3.946105] 7f80: edc90394 c14e62c0 c0b39548 00000002 c0784064 c05a3c78 c0b395e0 c14e62c0 [ 3.954681] 7fa0: 00000002 c0b39548 c0bc9db8 00000000 00000001 c05a1dc0 ed896000 00000015 [ 3.963287] 7fc0: c0bc9db8 ed896000 8000406a c0b30594 c0784064 c000e504 00000746 c007a528 [ 3.971862] 7fe0: 00000001 0000001d 600001d3 c0bcc004 00000000 800086c4 ee0aa6a7 d2aabaa9 [ 3.980499] [<c0029ed8>] (irq_notifier+0x234/0x25c) from [<c077c04c>] (notifier_call_chain+0x38/0x68) [ 3.990173] [<c077c04c>] (notifier_call_chain+0x38/0x68) from [<c00cfad8>] (cpu_pm_notify+0x20/0x38) [ 3.999786] [<c00cfad8>] (cpu_pm_notify+0x20/0x38) from [<c00cfb10>] (cpu_cluster_pm_exit+0x20/0x50) [ 4.009399] [<c00cfb10>] (cpu_cluster_pm_exit+0x20/0x50) from [<c002c1c8>] (omap_enter_idle_coupled+0x11c/0x14c) [ 4.020111] [<c002c1c8>] (omap_enter_idle_coupled+0x11c/0x14c) from [<c05a1bc4>] (cpuidle_enter_state+0x40/0xec) [ 4.030822] [<c05a1bc4>] (cpuidle_enter_state+0x40/0xec) from [<c05a3c78>] (cpuidle_enter_state_coupled+0x1f4/0x240) [ 4.041870] [<c05a3c78>] (cpuidle_enter_state_coupled+0x1f4/0x240) from [<c05a1dc0>] (cpuidle_idle_call+0x150/0x228) [ 4.052947] [<c05a1dc0>] (cpuidle_idle_call+0x150/0x228) from [<c000e504>] (arch_cpu_idle+0x8/0x38) [ 4.062499] [<c000e504>] (arch_cpu_idle+0x8/0x38) from [<c007a528>] (cpu_startup_entry+0x178/0x1e4) [ 4.071990] [<c007a528>] (cpu_startup_entry+0x178/0x1e4) from [<800086c4>] (0x800086c4) [ 4.080383] Code: e5922288 03a03b0a 13a03c25 e0823003 (e5932000) [ 4.086791] ---[ end trace d83954a84a6fa69e ]--- It is supposed that sar_base is initialized in irq_save_context, which is called on CPU_CLUSTER_PM_ENTER notification. If this notification has been missed and CPU_CLUSTER_PM_EXIT is received sar_base is NULL. Fix it by calling CPU_CLUSTER_PM_{ENTER,EXIT} under the same condition. Signed-off-by: Vladimir Murzin <murzin.v@gmail.com> Acked-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | ARM: mach-omap2: gpmc: Fix warning when CONFIG_ARM_LPAE=yFabio Estevam2013-09-181-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When CONFIG_ARM_LPAE=y the following build warning is generated: arch/arm/mach-omap2/gpmc.c:1495:4: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' [-Wformat] According to Documentation/printk-formats.txt '%pa' can be used to properly print 'resource_size_t'. Reported-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | ARM: OMAP: fix return value check in omap_device_build_from_dt()Wei Yongjun2013-09-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In case of error, the function omap_device_alloc() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | * | ARM: OMAP4: Fix clock_get error for GPMC during bootTony Lindgren2013-09-181-1/+1
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Looks like we still have the legacy clock alias name for omap4 GPMC (General Purpose Memory Controller), so let's fix it for the device tree naming. There's no need to keep the legacy naming as omap4 is DT only nowadays. Without this fix we get the following error while booting: [ 0.440399] omap-gpmc 50000000.gpmc: error: clk_get Reported-by: Olof Johansson <olof@lixom.net> Cc: stable@vger.kernel.org # v3.11 Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | ARM: multi_v7: add HREFv60 to multi_v7 defconfigLinus Walleij2013-09-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | This is just a standard board for the Ux500, include it in the v7 multiplatform defconfig. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
| * | ARM: sa1100: collie.c: fall back to jedec_probe flash detectionAndrea Adami2013-09-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Zaurus collie contains 2 LH28F640BFHE-PTTL90 (64M 4Mx16) and at the moment cfi will not detect the collie NOR. In the meanwhile we can revert to the jedec-probe map which has been fixed with following commit: mtd: jedec_probe: fix LH28F640BF definition fe2f4c8e0bf2756b670ee78fa9772613a2ea8495 Somehow this is unsatisfactory because the flash is mounted READ ONLY (as from factory, with a RO cramfs) Signed-off-by: Andrea Adami <andrea.adami@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
| * | ARM: u300: hide submenusLinus Walleij2013-09-181-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Right now the U300 submenus are showcased for everyone even if we're not on v5 multiplatforms. Hide this in the multiplatform configuration properly. Cc: arm@kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
| * | Merge tag 'imx-fixes-3.12' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Olof Johansson2013-09-176-7/+19
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | into fixes From Shawn Guo, imx fixes for 3.12: * A couple of clock driver and device tree fixes * A bug fix for clk-fixup-mux to get imx6sl back to boot * A L2 cache setting fix for imx6q * One pinctrl macro fix for UART2 DTE entries * tag 'imx-fixes-3.12' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: dts: imx6q: fix the wrong offset of the Pad Mux register ARM: imx: i.mx6d/q: disable the double linefill feature of PL310 ARM: imx51.dtsi: fix PATA device clock ARM: mach-imx: clk-imx51-imx53: Fix 'spdif1_pred' clock registration ARM: imx: initialize clk_init_data.flags for clk-fixup-mux ARM: imx27.dtsi: fix CSPI PER clock id Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | ARM: dts: imx6q: fix the wrong offset of the Pad Mux registerHuang Shijie2013-09-171-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch "0b7a76a ARM: dts: imx6q{dl}: add DTE pads for uart" adds the DTE pads for uart. For PAD_EIM_D29, the offset of the Pad Mux register should be 0x0c8, not 0x0c4. This patch fixes it. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
| | * | ARM: imx: i.mx6d/q: disable the double linefill feature of PL310Jason Liu2013-09-171-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The L2 cache controller(PL310) version on the i.MX6D/Q is r3p1-50rel0 The L2 cache controller(PL310) version on the i.MX6DL/SOLO/SL is r3p2 But according to ARM PL310 errata: 752271 ID: 752271: Double linefill feature can cause data corruption Fault Status: Present in: r3p0, r3p1, r3p1-50rel0. Fixed in r3p2 Workaround: The only workaround to this erratum is to disable the double linefill feature. This is the default behavior. without this patch, you will meet the following error when run the memtester application at: http://pyropus.ca/software/memtester/ FAILURE: 0x00100000 != 0x00200000 at offset 0x01365664. FAILURE: 0x00100000 != 0x00200000 at offset 0x01365668. FAILURE: 0x00100000 != 0x00200000 at offset 0x0136566c. FAILURE: 0x00100000 != 0x00200000 at offset 0x01365670. FAILURE: 0x00100000 != 0x00200000 at offset 0x01365674. FAILURE: 0x00100000 != 0x00200000 at offset 0x01365678. Signed-off-by: Jason Liu <r64343@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
OpenPOWER on IntegriCloud