summaryrefslogtreecommitdiffstats
path: root/arch/x86_64/kernel
Commit message (Collapse)AuthorAgeFilesLines
* Revert "[PATCH] x86_64: Fix the node cpumask of a cpu going down"Linus Torvalds2006-02-051-3/+0
| | | | | | | | | | | This reverts commit 10f4dc8b27ac42f930ac55adb8c521264dc997f8. Quoth Andi Kleen: "Kiran decided that it makes the problem worse than it was before. Fixing it fully requires more work which is too much for 2.6.16. So please revert that commit for now." Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] x86_64: IOMMU printk cleanupJon Mason2006-02-044-10/+11
| | | | | | | | | | | | | | | | | | | | This patch contains a printk reorder to remove the current problem of displaying "PCI-DMA: Disabling IOMMU." and then "PCI-DMA: using GART IOMMU" 20 lines later in dmesg. It also constains a printk reorder in swiotlb to state swiotlb enablement prior to describing the location of the bounce buffers, and a printk reorder to state gart enablement prior to describing the aperature. Also constains a whitespace cleanup in arch/x86_64/kernel/setup.c Tested (along with patch 2/2) on dual opteron with gart enabled, iommu=soft, and iommu=off. Signed-off-by: Jon Mason <jdmason@us.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] x86_64: Let impossible CPUs point to reference per cpu dataAndi Kleen2006-02-041-3/+5
| | | | | | | | | | | | | | Hack for 2.6.16. In 2.6.17 all code that uses NR_CPUs should be audited and changed to only touch possible CPUs. Don't mark the reference per cpu data init data (so it stays around after boot) and point all impossible CPUs to it. This way they reference some valid - although shared memory. Usually this is only initialization like INIT_LIST_HEADs and there won't be races because these CPUs never run. Still somewhat hackish. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] i386/x86-64: Don't ack the APIC for bad interrupts when the APIC is ↵Andi Kleen2006-02-041-0/+20
| | | | | | | | | | | not enabled It's bad juju to touch the APIC when it hasn't been enabled. I also moved ack_bad_irq for x86-64 out of line following i386. Signed-off-by: Andi Kleen <ak@suse.de> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] x86_64: small fix for CFI annotationsJan Beulich2006-02-041-0/+4
| | | | | | | | | | Conditionalize two unwind directives to match other similarly conditional code. Signed-Off-By: Jan Beulich <jbeulich@novell.com> Cc: Jim Houston <jim.houston@ccur.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] x86_64: Calibrate APIC timer using PM timerAndi Kleen2006-02-042-6/+47
| | | | | | | | | | | | | | | | | | | | | On some broken motherboards (at least one NForce3 based AMD64 laptop) the PIT timer runs at a incorrect frequency. This patch adds a new option "apicpmtimer" that allows to use the APIC timer and calibrate it using the PMTimer. It requires the earlier patch that allows to run the main timer from the APIC. Specifying apicpmtimer implies apicmaintimer. The option defaults to off for now. I tested it on a few systems and the resulting APIC timer frequencies were usually a bit off, but always <1%, which should be tolerable. TBD figure out heuristic to enable this automatically on the affected systems TBD perhaps do it on all NForce3s or using DMI? Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] x86_64: Don't allow kprobes on __switch_toAndi Kleen2006-02-041-1/+3
| | | | | | | | | | | | kprobes cannot deal with the funny calling conventions when it runs on a different stack when it returns. If someone wants to instrument context switch they can add a probe to schedule() instead. Cc: jkenisto@us.ibm.com, prasanna@in.ibm.com Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] x86_64: align per-cpu section to configured cache bytesZach Brown2006-02-041-1/+1
| | | | | | | | | | | | Align the start of the per-cpu section to the configured number of bytes in a cache line. This stops a BUG_ON() from triggering in load_module() when DEFINE_PER_CPU() is used in a module and the section isn't cacheline-aligned. Rusty also found this and sent a patch in a while ago (http://lkml.org/lkml/2004/10/19/17), I don't know what came of that. Signed-off-by: Zach Brown <zach.brown@oracle.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] x86_64: When allocation of merged SG lists fails in the IOMMU don't ↵Kevin VanMaren2006-02-041-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | merge [ AK: I redid Kevin's fix to be simpler, but the idea and original analysis of the problem is from Kevin] This avoid allocation failures on some SATA systems like Nvidia CK8 when the IOMMU gets fragmented. Modern SATA devices have quite large queues (128 entries) and the FS with ext2/3 is good enough now that it often passes whole 128 page sg lists down to the driver. These require 512K of continuous free space in the IOMMU aperture to map when merged. When the IOMMU is fragmented this could lead to spurious IO errors due to failing mappings. Short term fix is to just try to map the SG list again unmerged page by page - this way fragmentation doesn't matter anymore. The code for that was already there, but it just wasn't enabled for the merge case. According to Kevin at least the Nvidia device doesn't seem to benefit from merging much anyways, so the only slowdown is from trying to do an unnecessary merge attempt. Kevin plans to implement better fragmentation avoidance in the future, but that wouldn't be 2.6.16 material. TBD: should add some statistic counters to count how often that really happens. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] x86_64: data/functions wrongly marked as __init with cpu hotplug.Ashok Raj2006-02-041-1/+1
| | | | | | | | | | | attached patch is 2 more cases i found via running the reference_init.pl script. These were easy to spot just knowing the file names. There is one another about init/main.c that i cant exactly zero in. (partly because i dont know how to interpret the data thats spewed out of the tool). Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] x86_64: mark two routines as __cpuinitShaohua Li2006-02-042-2/+2
| | | | | | SIgned-off-by: Shaohua Li<shaohua.li@intel.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] x86_64: Fix the node cpumask of a cpu going downRavikiran G Thirumalai2006-02-041-0/+3
| | | | | | | | | | | | | | | | | | | Currently, x86_64 and ia64 arches do not clear the corresponding bits in the node's cpumask when a cpu goes down or cpu bring up is cancelled. This is buggy since there are pieces of common code where the cpumask is checked in the cpu down code path to decide on things (like in the slab down path). PPC does the right thing, but x86_64 and ia64 don't (This was the reason Sonny hit upon a slab bug during cpu offline on ppc and could not reproduce on other arches). This patch fixes it for x86_64. I won't attempt ia64 as I cannot test it. Credit for spotting this should go to Alok. Signed-off-by: Alok N Kataria <alokk@calsoftinc.com> Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org> Signed-off-by: Shai Fultheim <shai@scalex86.org> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] x86_64: Undo the earlier changes to remove unrolled copy/memset ↵Andi Kleen2006-02-041-0/+6
| | | | | | | | | | | | | | | | functions They cause quite bad performance regressions on Netburst This is temporary until we can get new optimized functions for these CPUs. This undoes changes that were done in 2.6.15 and in 2.6.16-rc1, essentially bringing the code back to 2.6.14 level. Only change is I renamed the X86_FEATURE_K8_C flag to X86_FEATURE_REP_GOOD and fixed the check for the flag and also fixed some comments. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] x86_64: Fix swiotlb dma_alloc_coherent fallbackAndi Kleen2006-02-041-0/+3
| | | | | | | | This avoids BUG_ONs in the low level allocator when an illegal GFP mask is added. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] x86_64: [PATCH] timer resumeShaohua Li2006-02-042-0/+17
| | | | | | | | | | At resume time, TSC's value or something similar might be changed a lot against suspend time. This could make system gets a very big lost ticks. See http://bugzilla.kernel.org/show_bug.cgi?id=5825 Signed-off-by: Shaohua Li<shaohua.li@intel.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] x86_64: Automatically enable apicmaintimer on ATI boardsAndi Kleen2006-02-041-0/+8
| | | | | | | | | They all have problems with IRQ 0 routing, so just use the APIC on them. Can be overwritten with "noapicmaintimer" Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] x86_64: Allow to run main time keeping from the local APIC interruptAndi Kleen2006-02-042-9/+70
| | | | | | | | | | | | | | | | | | | | | | Another piece from the no-idle-tick patch. This can be enabled with the "apicmaintimer" option. This is mainly useful when the PIT/HPET interrupt is unreliable. Note there are some systems that are known to stop the APIC timer in C3. For those it will never work, but this case should be automatically detected. It also only works with PM timer right now. When HPET is used the way the main timer handler computes the delay doesn't work. It should be a bit more efficient because there is one less regular interrupt to process on the boot processor. Requires earlier bugfix from Venkatesh Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] x86_64: Disallow kprobes on NMI handlersAndi Kleen2006-02-043-13/+18
| | | | | | | | A kprobe executes IRET early and that could cause NMI recursion and stack corruption. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
*-------. [ACPI] merge 3549 4320 4485 4588 4980 5483 5651 acpica asus fops pnpacpi ↵Len Brown2006-01-244-9/+86
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | branches into release Signed-off-by: Len Brown <len.brown@intel.com>
| | | | | * Pull pnpacpi into acpica branchLen Brown2006-01-076-8/+15
| | | | | |\ | | |_|_|_|/ | |/| | | |
| | | | | * [ACPI] acpi_register_gsi() fix needed for ACPICA 20051021Len Brown2005-12-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the #define for ACPI_LEVEL_SENSITIVE instead of assuming non-zero, because ACPICA 20051021 changes its value to zero. Also, use uniform variable names: edge_level -> triggering active_high_low -> polarity Signed-off-by: Len Brown <len.brown@intel.com>
| | | | | * [ACPI] ACPICA 20050930Bob Moore2005-12-102-9/+9
| | | | |/ | | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Completed a major overhaul of the Resource Manager code - specifically, optimizations in the area of the AML/internal resource conversion code. The code has been optimized to simplify and eliminate duplicated code, CPU stack use has been decreased by optimizing function parameters and local variables, and naming conventions across the manager have been standardized for clarity and ease of maintenance (this includes function, parameter, variable, and struct/typedef names.) All Resource Manager dispatch and information tables have been moved to a single location for clarity and ease of maintenance. One new file was created, named "rsinfo.c". The ACPI return macros (return_ACPI_STATUS, etc.) have been modified to guarantee that the argument is not evaluated twice, making them less prone to macro side-effects. However, since there exists the possibility of additional stack use if a particular compiler cannot optimize them (such as in the debug generation case), the original macros are optionally available. Note that some invocations of the return_VALUE macro may now cause size mismatch warnings; the return_UINT8 and return_UINT32 macros are provided to eliminate these. (From Randy Dunlap) Implemented a new mechanism to enable debug tracing for individual control methods. A new external interface, acpi_debug_trace(), is provided to enable this mechanism. The intent is to allow the host OS to easily enable and disable tracing for problematic control methods. This interface can be easily exposed to a user or debugger interface if desired. See the file psxface.c for details. acpi_ut_callocate() will now return a valid pointer if a length of zero is specified - a length of one is used and a warning is issued. This matches the behavior of acpi_ut_allocate(). Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
| | | | * [ACPI] Avoid BIOS inflicted crashes by evaluating _PDC only onceVenkatesh Pallipadi2005-12-012-0/+77
| | | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Linux invokes the AML _PDC method (Processor Driver Capabilities) to tell the BIOS what features it can handle. While the ACPI spec says nothing about the OS invoking _PDC multiple times, doing so with changing bits seems to hopelessly confuse the BIOS on multiple platforms up to and including crashing the system. Factor out the _PDC invocation so Linux invokes it only once. http://bugzilla.kernel.org/show_bug.cgi?id=5483 Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
* | | | [PATCH] x86_64: Fix MCE exception stack for boot CPUJan Beulich2006-01-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix a typo/mis-merge in one of the previous patches. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | [PATCH] x86_64: eliminate empty_bad_{page,{pte,pmd}_table}Jan Beulich2006-01-161-71/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ... as they are no longer needed. Since there were hard-coded numbers in the file, the patch also adds a mechanism to avoid these (otherwise potential future changes would again and again require adjusting these numbers). Signed-Off-By: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | [PATCH] x86_64: set do_not_nx as cpuinitdataAndi Kleen2006-01-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'check_efer' uses 'do_not_nx'. Hotpluged CPU could wrongly disable NX. Signed-off-by: Shaohua Li<shaohua.li@intel.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | [PATCH] x86_64: lapic resume uses correct base addressShaohua Li2006-01-161-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | uses correct lapic base address. The set_fixmap appears useless. Signed-off-by: Shaohua Li<shaohua.li@intel.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | [PATCH] x86_64: Allow nesting of int3 by default for kprobesAndi Kleen2006-01-162-10/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This unbreaks recursive kprobes which didn't work anymore due to an earlier patch which converted the debug entry point to use an IST. This also allows nesting of the debug entry point too. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | [PATCH] amd64: task_stack_page()Al Viro2006-01-122-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | [PATCH] amd64: task_pt_regs()Al Viro2006-01-123-11/+4
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | [PATCH] amd64: task_thread_info()Al Viro2006-01-125-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | [PATCH] x86_64: Fix SMP bootup with CONFIG_KDUMP enabledVivek Goyal2006-01-111-2/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | o This fix was posted for i386 long back. Posting it for x86_64. http://marc.theaimsgroup.com/?l=linux-kernel&m=110380103229830&w=2 o This patch fixes the problem of secondary cpus boot up. This situation is faced when kernel is built for default locations like 16MB and onwards. In this configuration, only primary cpu (BP) comes and secondary cpus don't boot. o Problem occurs because in trampoline code, lgdt is not able to load the GDT as it happens to be situated beyond 16MB. This is due to the fact that cpu is still in real mode and default operand size is 16bit. o This patch uses lgdtl instead of lgdt to force operand size to 32 instead of 16. Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | [PATCH] x86_64: Don't confuse noapic with noapictimerAndi Kleen2006-01-111-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Handling common prefixes is tricky. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | [PATCH] x86_64: don't copy command line twiceJan Beulich2006-01-111-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ... reducing the amount of changes Xen has to do. Signed-Off-By: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | [PATCH] i386/x86-64: make setup_early_printk() usage consistentJan Beulich2006-01-112-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The explicit and implicit calls to setup_early_printk() were passing inconsistent arguments. Signed-Off-By: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | [PATCH] x86_64: Use safe_smp_processor_id in MCE handlerAndi Kleen2006-01-111-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | hard_smp_processor_id would return the local APIC id instead of the Linux processor id. On big systems they are often not identical. safe_smp_processor_id is just a wrapper around it that does the necessary conversions. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | [PATCH] x86_64: Some housekeeping in local APIC codeAndi Kleen2006-01-114-64/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove support for obsolete hardware and cleanup. - Remove checks for non integrated APICs - Replace apic_write_around with apic_write. - Remove apic_read_around - Remove APIC version reads used by old workarounds - Remove old workaround for Simics - Fix indentation Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | [PATCH] x86_64: Display meaningful part of filename during BUG()Jan Beulich2006-01-111-3/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When building in a separate objtree, file names produced by BUG() & Co. can get fairly long; printing only the first 50 characters may thus result in (almost) no useful information. The following change makes it so that rather the last 50 characters of the filename get printed. Signed-Off-By: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | [PATCH] x86_64: Reduce screen space needed by stack traceJan Beulich2006-01-111-13/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Especially under Xen, where the console cannot be adjusted to more than 25 lines, it is fairly important that the information displayed during a panic is as compact as possible. Below adjustments work towards that. Signed-Off-By: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | [PATCH] x86_64: Fix get_cmos_time()Jan Beulich2006-01-111-7/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Due to a broken condition, the body of the loop that is intended to wait for the Update-In-Progress bit to get set and then cleared again was never entered; in fact, the entire loop was optimized out by the compiler. Here is a change to fix the condition (and to also move the initialization of locals out of the spin lock protected region). Signed-Off-By: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | [PATCH] x86_64: No need to export get_cmos_time anymoreAndi Kleen2006-01-112-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It was only needed for APM Pointed out by Jan Beulich Cc: jbeulich@novell.com Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | [PATCH] x86_64: Remove unused AMD K8 C stepping flagAndi Kleen2006-01-111-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | X86_FEATURE_K8_C was a synthetic Linux CPUID flag that was used for some code optimizations in Opteron C stepping or later. But support for pre C stepping optimizations has been removed, so this isn't needed anymore. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | [PATCH] x86_64: sparse warning cleanupsStephen Hemminger2006-01-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix some trivial sparse warnings in x86_64 code. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | [PATCH] x86_64: Remove unused segmentsAndi Kleen2006-01-111-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | They used to be used by the reboot code, but not anymore. Noticed by Jan Beulich Cc: JBeulich@novell.com Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | [PATCH] x86_64: ioapic virtual wire mode fixVivek Goyal2006-01-111-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | o Currently, during kexec reboot, IOAPIC is re-programmed back to virtual wire mode if there was an i8259 connected to it. This enables getting timer interrupts in second kernel in legacy mode. o After putting into virtual wire mode, IOAPIC delivers the i8259 interrupts to CPU0. This works well for kexec but not for kdump as we might crash on a different CPU and second kernel will not see timer interrupts. o This patch modifies the redirection table entry to deliver the timer interrupts to the cpu we are rebooting (instead of hardcoding to zero). This ensures that second kernel receives timer interrupts even on a non-boot cpu. Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | [PATCH] x86_64: Inclusion of ScaleMP vSMP architecture patches - vsmp_archRavikiran G Thirumalai2006-01-112-0/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce vSMP arch to the kernel. This patch: 1. Adds CONFIG_X86_VSMP 2. Adds machine specific macros for local_irq_disabled, local_irq_enabled and irqs_disabled 3. Writes to the vSMP CTL device to indicate kernel compiled with CONFIG_VSMP Signed-off-by: Ravikiran Thirumalai <kiran@scalemp.com> Signed-off-by: Shai Fultheim <shai@scalemp.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | [PATCH] x86_64: Memorize location of i8259 for reboots.Eric W. Biederman2006-01-111-36/+108
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently we attempt to restore virtual wire mode on reboot, which only works if we can figure out where the i8259 is connected. This is very useful when we are kexec another kernel and likely helpful to an peculiar BIOS that make assumptions about how the system is setup. Since the acpi MADT table does not provide the location where the i8259 is connected we have to look at the hardware to figure it out. Most systems have the i8259 connected the local apic of the cpu so won't be affected but people running Opteron and some serverworks chipsets should be able to use kexec now. In addition this patch removes the hard coded assumption that the io_apic that delivers isa interrups is always known to the kernel as io_apic 0. There does not appear to be anything to guarantee that assumption is true. And From: Vivek Goyal <vgoyal@in.ibm.com> A minor fix to the patch which remembers the location of where i8259 is connected. Now counter i has been replaced by apic. counter i is having some junk value which was leading to non-detection of i8259 connected to IOAPIC. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | [PATCH] x86_64: allow setting RF in EFLAGSChuck Ebbert2006-01-111-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Setting RF (resume flag) allows a debugger to resume execution after a code breakpoint without tripping the breakpoint again. It is reset by the CPU after executing one instruction. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | [PATCH] x86_64: "invalid operand" -> "invalid opcode"Chuck Ebbert2006-01-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The manual says Int 6 is "invalid opcode", not "invalid operand". Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | | | [PATCH] x86_64: Sparse warnings fix.Luiz Fernando Capitulino2006-01-111-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes the following sparse warnings: arch/x86_64/kernel/mce_amd.c:321:29: warning: Using plain integer as NULL pointer arch/x86_64/kernel/mce_amd.c:410:41: warning: Using plain integer as NULL pointer Signed-off-by: Luiz Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
OpenPOWER on IntegriCloud