summaryrefslogtreecommitdiffstats
path: root/arch/x86
Commit message (Collapse)AuthorAgeFilesLines
* x86: avoid avoid passing around 'thread_info' in stack dumping codeLinus Torvalds2016-06-234-23/+17
| | | | | | | | | | None of the code actually wants a thread_info, it all wants a task_struct, and it's just converting to a thread_info pointer much too early. No semantic change. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge tag 'driver-core-4.7-rc4' of ↵Linus Torvalds2016-06-181-0/+9
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here are a small number of debugfs, ISA, and one driver core fix for 4.7-rc4. All of these resolve reported issues. The ISA ones have spent the least amount of time in linux-next, sorry about that, I didn't realize they were regressions that needed to get in now (thanks to Thorsten for the prodding!) but they do all pass the 0-day bot tests. The others have been in linux-next for a while now. Full details about them are in the shortlog below" * tag 'driver-core-4.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: isa: Dummy isa_register_driver should return error code isa: Call isa_bus_init before dependent ISA bus drivers register watchdog: ebc-c384_wdt: Allow build for X86_64 iio: stx104: Allow build for X86_64 gpio: Allow PC/104 devices on X86_64 isa: Allow ISA-style drivers on modern systems base: make module_create_drivers_dir race-free debugfs: open_proxy_open(): avoid double fops release debugfs: full_proxy_open(): free proxy on ->open() failure kernel/kcov: unproxify debugfs file's fops
| * isa: Allow ISA-style drivers on modern systemsWilliam Breathitt Gray2016-06-171-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Several modern devices, such as PC/104 cards, are expected to run on modern systems via an ISA bus interface. Since ISA is a legacy interface for most modern architectures, ISA support should remain disabled in general. Support for ISA-style drivers should be enabled on a per driver basis. To allow ISA-style drivers on modern systems, this patch introduces the ISA_BUS_API and ISA_BUS Kconfig options. The ISA bus driver will now build conditionally on the ISA_BUS_API Kconfig option, which defaults to the legacy ISA Kconfig option. The ISA_BUS Kconfig option allows the ISA_BUS_API Kconfig option to be selected on architectures which do not enable ISA (e.g. X86_64). The ISA_BUS Kconfig option is currently only implemented for X86 architectures. Other architectures may have their own ISA_BUS Kconfig options added as required. Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2016-06-163-13/+34
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull KVM fixes from Paolo Bonzini: - miscellaneous fixes for MIPS and s390 - one new kvm_stat for s390 - correctly disable VT-d posted interrupts with the rest of posted interrupts - "make randconfig" fix for x86 AMD - off-by-one in irq route check (the "good" kind that errors out a bit too early!) * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvm: vmx: check apicv is active before using VT-d posted interrupt kvm: Fix irq route entries exceeding KVM_MAX_IRQ_ROUTES kvm: svm: Do not support AVIC if not CONFIG_X86_LOCAL_APIC kvm: svm: Fix implicit declaration for __default_cpu_present_to_apicid() MIPS: KVM: Fix CACHE triggered exception emulation MIPS: KVM: Don't unwind PC when emulating CACHE MIPS: KVM: Include bit 31 in segment matches MIPS: KVM: Fix modular KVM under QEMU KVM: s390: Add stats for PEI events KVM: s390: ignore IBC if zero
| * kvm: vmx: check apicv is active before using VT-d posted interruptYang Zhang2016-06-161-5/+10
| | | | | | | | | | | | | | | | | | | | | | | | VT-d posted interrupt is relying on the CPU side's posted interrupt. Need to check whether VCPU's APICv is active before enabing VT-d posted interrupt. Fixes: d62caabb41f33d96333f9ef15e09cd26e1c12760 Cc: stable@vger.kernel.org Signed-off-by: Yang Zhang <yang.zhang.wz@gmail.com> Signed-off-by: Shengge Ding <shengge.dsg@alibaba-inc.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
| * kvm: svm: Do not support AVIC if not CONFIG_X86_LOCAL_APICSuravee Suthikulpanit2016-06-161-5/+10
| | | | | | | | | | | | | | | | Add logic to disable AVIC #ifndef CONFIG_X86_LOCAL_APIC. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
| * kvm: svm: Fix implicit declaration for __default_cpu_present_to_apicid()Suravee Suthikulpanit2016-06-162-3/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The commit 8221c1370056 ("svm: Manage vcpu load/unload when enable AVIC") introduces a build error due to implicit function declaration when #ifdef CONFIG_X86_32 and #ifndef CONFIG_X86_LOCAL_APIC (as reported by Kbuild test robot i386-randconfig-x0-06121009). So, this patch introduces kvm_cpu_get_apicid() wrapper around __default_cpu_present_to_apicid() with additional handling if CONFIG_X86_LOCAL_APIC is not defined. Reported-by: kbuild test robot <fengguang.wu@intel.com> Fixes: commit 8221c1370056 ("svm: Manage vcpu load/unload when enable AVIC") Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* | Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds2016-06-106-15/+86
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes from all around the map, plus a commit that introduces a new header of Intel model name symbols (unused) that will make the next merge window easier" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/ioapic: Fix incorrect pointers in ioapic_setup_resources() x86/entry/traps: Don't force in_interrupt() to return true in IST handlers x86/cpu/AMD: Extend X86_FEATURE_TOPOEXT workaround to newer models x86/cpu/intel: Introduce macros for Intel family numbers x86, build: copy ldlinux.c32 to image.iso x86/msr: Use the proper trace point conditional for writes
| * | x86/ioapic: Fix incorrect pointers in ioapic_setup_resources()Rui Wang2016-06-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On a 4-socket Brickland system, hot-removing one ioapic is fine. Hot-removing the 2nd one causes panic in mp_unregister_ioapic() while calling release_resource(). It is because the iomem_res pointer has already been released when removing the first ioapic. To explain the use of &res[num] here: res is assigned to ioapic_resources, and later in ioapic_insert_resources() we do: struct resource *r = ioapic_resources; for_each_ioapic(i) { insert_resource(&iomem_resource, r); r++; } Here 'r' is treated as an arry of 'struct resource', and the r++ ensures that each element of the array is inserted separately. Thus we should call release_resouce() on each element at &res[num]. Fix it by assigning the correct pointers to ioapics[i].iomem_res in ioapic_setup_resources(). Signed-off-by: Rui Wang <rui.y.wang@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: tony.luck@intel.com Cc: linux-pci@vger.kernel.org Cc: rjw@rjwysocki.net Cc: linux-acpi@vger.kernel.org Cc: bhelgaas@google.com Link: http://lkml.kernel.org/r/1465369193-4816-3-git-send-email-rui.y.wang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
| * | x86/entry/traps: Don't force in_interrupt() to return true in IST handlersAndy Lutomirski2016-06-101-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Forcing in_interrupt() to return true if we're not in a bona fide interrupt confuses the softirq code. This fixes warnings like: NOHZ: local_softirq_pending 282 ... which can happen when running things like selftests/x86. This will change perf's static percpu buffer usage in IST context. I think this is okay, and it's changing the behavior to match historical (pre-4.0) behavior. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Fixes: 959274753857 ("x86, traps: Track entry into and exit from IST context") Link: http://lkml.kernel.org/r/cdc215f94d118d691d73df35275022331156fb45.1464130360.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
| * | x86/cpu/AMD: Extend X86_FEATURE_TOPOEXT workaround to newer modelsBorislav Petkov2016-06-081-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We need to reenable the topology extensions CPUID leafs on newer models too, if BIOS has disabled them, as we rely on them to get proper compute unit topology. Make the printk a once thing, while at it. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rui Huang <ray.huang@amd.com> Cc: Sherry Hurwitz <sherry.hurwitz@amd.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-hwmon@vger.kernel.org Link: http://lkml.kernel.org/r/1464775468-23355-1-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
| * | x86/cpu/intel: Introduce macros for Intel family numbersDave Hansen2016-06-081-0/+68
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: We have a boatload of open-coded family-6 model numbers. Half of them have these model numbers in hex and the other half in decimal. This makes grepping for them tons of fun, if you were to try. Solution: Consolidate all the magic numbers. Put all the definitions in one header. The names here are closely derived from the comments describing the models from arch/x86/events/intel/core.c. We could easily make them shorter by doing things like s/SANDYBRIDGE/SNB/, but they seemed fine even with the longer versions to me. Do not take any of these names too literally, like "DESKTOP" or "MOBILE". These are all colloquial names and not precise descriptions of everywhere a given model will show up. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Dave Hansen <dave@sr71.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Doug Thompson <dougthompson@xmission.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Len Brown <lenb@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com> Cc: Souvik Kumar Chakravarty <souvik.k.chakravarty@intel.com> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Vishwanath Somayaji <vishwanath.somayaji@intel.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: jacob.jun.pan@intel.com Cc: linux-acpi@vger.kernel.org Cc: linux-edac@vger.kernel.org Cc: linux-mmc@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: platform-driver-x86@vger.kernel.org Link: http://lkml.kernel.org/r/20160603001927.F2A7D828@viggo.jf.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
| * | x86, build: copy ldlinux.c32 to image.isoH. Peter Anvin2016-06-071-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | For newer versions of Syslinux, we need ldlinux.c32 in addition to isolinux.bin to reside on the boot disk, so if the latter is found, copy it, too, to the isoimage tree. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: Linux Stable Tree <stable@vger.kernel.org>
| * | x86/msr: Use the proper trace point conditional for writesDr. David Alan Gilbert2016-06-061-2/+2
| |/ | | | | | | | | | | | | | | | | | | | | | | The msr tracing for writes is incorrectly conditional on the read trace. Fixes: 7f47d8cc039f "x86, tracing, perf: Add trace point for MSR accesses" Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: stable@vger.kernel.org Cc: ak@linux.intel.com Link: http://lkml.kernel.org/r/1464976859-21850-1-git-send-email-dgilbert@redhat.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* | Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds2016-06-102-22/+1
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "A handful of tooling fixes, two PMU driver fixes and a cleanup of redundant code that addresses a security analyzer false positive" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Remove a redundant check perf/x86/intel/uncore: Remove SBOX support for Broadwell server perf ctf: Convert invalid chars in a string before set value perf record: Fix crash when kptr is restricted perf symbols: Check kptr_restrict for root perf/x86/intel/rapl: Fix pmus free during cleanup
| * perf/x86/intel/uncore: Remove SBOX support for Broadwell serverKan Liang2016-06-031-21/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There was a report that on certain Broadwell-EP systems writing any bit of the SBOX PMU initialization MSR would #GP at boot. This did not happen on all systems. My test systems booted fine. Considering both DE and EP may have such issues, this patch removes SBOX support for all Broadwell platforms for now. Reported-and-tested-by: Mark van Dijk <mark@voidzero.net> Signed-off-by: Kan Liang <kan.liang@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/1464347540-5763-1-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
| * perf/x86/intel/rapl: Fix pmus free during cleanupVincent Stehlé2016-05-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | On rapl cleanup path, kfree() is given by mistake the address of the pointer of the structure to free (rapl_pmus->pmus + i). Pass the pointer instead (rapl_pmus->pmus[i]). Fixes: 9de8d686955b "perf/x86/intel/rapl: Convert it to a per package facility" Signed-off-by: Vincent Stehlé <vincent.stehle@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1464101629-14905-1-git-send-email-vincent.stehle@intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* | KVM: x86: fix OOPS after invalid KVM_SET_DEBUGREGSPaolo Bonzini2016-06-021-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MOV to DR6 or DR7 causes a #GP if an attempt is made to write a 1 to any of bits 63:32. However, this is not detected at KVM_SET_DEBUGREGS time, and the next KVM_RUN oopses: general protection fault: 0000 [#1] SMP CPU: 2 PID: 14987 Comm: a.out Not tainted 4.4.9-300.fc23.x86_64 #1 Hardware name: LENOVO 2325F51/2325F51, BIOS G2ET32WW (1.12 ) 05/30/2012 [...] Call Trace: [<ffffffffa072c93d>] kvm_arch_vcpu_ioctl_run+0x141d/0x14e0 [kvm] [<ffffffffa071405d>] kvm_vcpu_ioctl+0x33d/0x620 [kvm] [<ffffffff81241648>] do_vfs_ioctl+0x298/0x480 [<ffffffff812418a9>] SyS_ioctl+0x79/0x90 [<ffffffff817a0f2e>] entry_SYSCALL_64_fastpath+0x12/0x71 Code: 55 83 ff 07 48 89 e5 77 27 89 ff ff 24 fd 90 87 80 81 0f 23 fe 5d c3 0f 23 c6 5d c3 0f 23 ce 5d c3 0f 23 d6 5d c3 0f 23 de 5d c3 <0f> 23 f6 5d c3 0f 0b 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 RIP [<ffffffff810639eb>] native_set_debugreg+0x2b/0x40 RSP <ffff88005836bd50> Testcase (beautified/reduced from syzkaller output): #include <unistd.h> #include <sys/syscall.h> #include <string.h> #include <stdint.h> #include <linux/kvm.h> #include <fcntl.h> #include <sys/ioctl.h> long r[8]; int main() { struct kvm_debugregs dr = { 0 }; r[2] = open("/dev/kvm", O_RDONLY); r[3] = ioctl(r[2], KVM_CREATE_VM, 0); r[4] = ioctl(r[3], KVM_CREATE_VCPU, 7); memcpy(&dr, "\x5d\x6a\x6b\xe8\x57\x3b\x4b\x7e\xcf\x0d\xa1\x72" "\xa3\x4a\x29\x0c\xfc\x6d\x44\x00\xa7\x52\xc7\xd8" "\x00\xdb\x89\x9d\x78\xb5\x54\x6b\x6b\x13\x1c\xe9" "\x5e\xd3\x0e\x40\x6f\xb4\x66\xf7\x5b\xe3\x36\xcb", 48); r[7] = ioctl(r[4], KVM_SET_DEBUGREGS, &dr); r[6] = ioctl(r[4], KVM_RUN, 0); } Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
* | KVM: fail KVM_SET_VCPU_EVENTS with invalid exception numberPaolo Bonzini2016-06-021-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This cannot be returned by KVM_GET_VCPU_EVENTS, so it is okay to return EINVAL. It causes a WARN from exception_type: WARNING: CPU: 3 PID: 16732 at arch/x86/kvm/x86.c:345 exception_type+0x49/0x50 [kvm]() CPU: 3 PID: 16732 Comm: a.out Tainted: G W 4.4.6-300.fc23.x86_64 #1 Hardware name: LENOVO 2325F51/2325F51, BIOS G2ET32WW (1.12 ) 05/30/2012 0000000000000286 000000006308a48b ffff8800bec7fcf8 ffffffff813b542e 0000000000000000 ffffffffa0966496 ffff8800bec7fd30 ffffffff810a40f2 ffff8800552a8000 0000000000000000 00000000002c267c 0000000000000001 Call Trace: [<ffffffff813b542e>] dump_stack+0x63/0x85 [<ffffffff810a40f2>] warn_slowpath_common+0x82/0xc0 [<ffffffff810a423a>] warn_slowpath_null+0x1a/0x20 [<ffffffffa0924809>] exception_type+0x49/0x50 [kvm] [<ffffffffa0934622>] kvm_arch_vcpu_ioctl_run+0x10a2/0x14e0 [kvm] [<ffffffffa091c04d>] kvm_vcpu_ioctl+0x33d/0x620 [kvm] [<ffffffff81241248>] do_vfs_ioctl+0x298/0x480 [<ffffffff812414a9>] SyS_ioctl+0x79/0x90 [<ffffffff817a04ee>] entry_SYSCALL_64_fastpath+0x12/0x71 ---[ end trace b1a0391266848f50 ]--- Testcase (beautified/reduced from syzkaller output): #include <unistd.h> #include <sys/syscall.h> #include <string.h> #include <stdint.h> #include <fcntl.h> #include <sys/ioctl.h> #include <linux/kvm.h> long r[31]; int main() { memset(r, -1, sizeof(r)); r[2] = open("/dev/kvm", O_RDONLY); r[3] = ioctl(r[2], KVM_CREATE_VM, 0); r[7] = ioctl(r[3], KVM_CREATE_VCPU, 0); struct kvm_vcpu_events ve = { .exception.injected = 1, .exception.nr = 0xd4 }; r[27] = ioctl(r[7], KVM_SET_VCPU_EVENTS, &ve); r[30] = ioctl(r[7], KVM_RUN, 0); return 0; } Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
* | KVM: x86: avoid vmalloc(0) in the KVM_SET_CPUIDPaolo Bonzini2016-06-021-10/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This causes an ugly dmesg splat. Beautified syzkaller testcase: #include <unistd.h> #include <sys/syscall.h> #include <sys/ioctl.h> #include <fcntl.h> #include <linux/kvm.h> long r[8]; int main() { struct kvm_cpuid2 c = { 0 }; r[2] = open("/dev/kvm", O_RDWR); r[3] = ioctl(r[2], KVM_CREATE_VM, 0); r[4] = ioctl(r[3], KVM_CREATE_VCPU, 0x8); r[7] = ioctl(r[4], KVM_SET_CPUID, &c); return 0; } Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
* | kvm: x86: avoid warning on repeated KVM_SET_TSS_ADDRPaolo Bonzini2016-06-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Found by syzkaller: WARNING: CPU: 3 PID: 15175 at arch/x86/kvm/x86.c:7705 __x86_set_memory_region+0x1dc/0x1f0 [kvm]() CPU: 3 PID: 15175 Comm: a.out Tainted: G W 4.4.6-300.fc23.x86_64 #1 Hardware name: LENOVO 2325F51/2325F51, BIOS G2ET32WW (1.12 ) 05/30/2012 0000000000000286 00000000950899a7 ffff88011ab3fbf0 ffffffff813b542e 0000000000000000 ffffffffa0966496 ffff88011ab3fc28 ffffffff810a40f2 00000000000001fd 0000000000003000 ffff88014fc50000 0000000000000000 Call Trace: [<ffffffff813b542e>] dump_stack+0x63/0x85 [<ffffffff810a40f2>] warn_slowpath_common+0x82/0xc0 [<ffffffff810a423a>] warn_slowpath_null+0x1a/0x20 [<ffffffffa09251cc>] __x86_set_memory_region+0x1dc/0x1f0 [kvm] [<ffffffffa092521b>] x86_set_memory_region+0x3b/0x60 [kvm] [<ffffffffa09bb61c>] vmx_set_tss_addr+0x3c/0x150 [kvm_intel] [<ffffffffa092f4d4>] kvm_arch_vm_ioctl+0x654/0xbc0 [kvm] [<ffffffffa091d31a>] kvm_vm_ioctl+0x9a/0x6f0 [kvm] [<ffffffff81241248>] do_vfs_ioctl+0x298/0x480 [<ffffffff812414a9>] SyS_ioctl+0x79/0x90 [<ffffffff817a04ee>] entry_SYSCALL_64_fastpath+0x12/0x71 Testcase: #include <unistd.h> #include <sys/ioctl.h> #include <fcntl.h> #include <string.h> #include <linux/kvm.h> long r[8]; int main() { memset(r, -1, sizeof(r)); r[2] = open("/dev/kvm", O_RDONLY|O_TRUNC); r[3] = ioctl(r[2], KVM_CREATE_VM, 0x0ul); r[5] = ioctl(r[3], KVM_SET_TSS_ADDR, 0x20000000ul); r[7] = ioctl(r[3], KVM_SET_TSS_ADDR, 0x20000000ul); return 0; } Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
* | KVM: Handle MSR_IA32_PERF_CTLDmitry Bilunov2016-06-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Intel CPUs having Turbo Boost feature implement an MSR to provide a control interface via rdmsr/wrmsr instructions. One could detect the presence of this feature by issuing one of these instructions and handling the #GP exception which is generated in case the referenced MSR is not implemented by the CPU. KVM's vCPU model behaves exactly as a real CPU in this case by injecting a fault when MSR_IA32_PERF_CTL is called (which KVM does not support). However, some operating systems use this register during an early boot stage in which their kernel is not capable of handling #GP correctly, causing #DP and finally a triple fault effectively resetting the vCPU. This patch implements a dummy handler for MSR_IA32_PERF_CTL to avoid the crashes. Signed-off-by: Dmitry Bilunov <kmeaw@yandex-team.ru> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
* | KVM: x86: avoid write-tearing of TDPNadav Amit2016-06-021-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | In theory, nothing prevents the compiler from write-tearing PTEs, or split PTE writes. These partially-modified PTEs can be fetched by other cores and cause mayhem. I have not really encountered such case in real-life, but it does seem possible. For example, the compiler may try to do something creative for kvm_set_pte_rmapp() and perform multiple writes to the PTE. Signed-off-by: Nadav Amit <nadav.amit@gmail.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
* | Merge branch 'for-linus-4.7-rc1' of ↵Linus Torvalds2016-05-276-41/+72
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml Pull UML updates from Richard Weinberger: "This contains a nice FPU fixup from Eli Cooper for UML" * 'for-linus-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: add extended processor state save/restore support um: extend fpstate to _xstate to support YMM registers um: fix FPU state preservation around signal handlers
| * | um: add extended processor state save/restore supportEli Cooper2016-05-214-15/+59
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch extends save_fp_registers() and restore_fp_registers() to use PTRACE_GETREGSET and PTRACE_SETREGSET with the XSTATE note type, adding support for new processor state extensions between context switches. When the new ptrace requests are unavailable, it falls back to the old PTRACE_GETFPREGS and PTRACE_SETFPREGS methods, which have been renamed to save_i387_registers() and restore_i387_registers(). Now these functions expect *fp_regs to have the space of an _xstate struct. Thus, this also makes ptrace in UML responde to PTRACE_GETFPREGS/_SETFPREG requests with a user_i387_struct (thus independent from HOST_FP_SIZE), and by calling save_i387_registers() and restore_i387_registers() instead of the extended save_fp_registers() and restore_fp_registers() functions. Signed-off-by: Eli Cooper <elicooper@gmx.com>
| * | um: extend fpstate to _xstate to support YMM registersEli Cooper2016-05-212-13/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Extends fpstate to _xstate, in order to hold AVX/YMM registers. To avoid oversized stack frame, the following functions have been refactored by using malloc. - sig_handler_common - timer_real_alarm_handler Signed-off-by: Eli Cooper <elicooper@gmx.com>
| * | um: fix FPU state preservation around signal handlersEli Cooper2016-05-211-15/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch makes UML saves/restores FPU state from/to the fpstate in pt_regs when setting up or returning from a signal stack, rather than calling ptrace directly. This ensures that FPU state is correctly preserved around signal handlers in a multi-threaded scenario. Signed-off-by: Eli Cooper <elicooper@gmx.com>
* | | mm: remove more IS_ERR_VALUE abusesLinus Torvalds2016-05-271-9/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The do_brk() and vm_brk() return value was "unsigned long" and returned the starting address on success, and an error value on failure. The reasons are entirely historical, and go back to it basically behaving like the mmap() interface does. However, nobody actually wanted that interface, and it causes totally pointless IS_ERR_VALUE() confusion. What every single caller actually wants is just the simpler integer return of zero for success and negative error number on failure. So just convert to that much clearer and more common calling convention, and get rid of all the IS_ERR_VALUE() uses wrt vm_brk(). Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | Merge tag 'platform-drivers-x86-v4.7-1' of ↵Linus Torvalds2016-05-272-1/+28
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.infradead.org/users/dvhart/linux-platform-drivers-x86 Pull x86 platform driver updates from Darren Hart: "Mostly minor updates and cleanups. One new power management controller driver for Intel Core SoCs. platform/x86: - Add PMC Driver for Intel Core SoC dell-rbtn: - Ignore ACPI notifications if device is suspended thinkpad_acpi: - save kbdlight state on suspend and restore it on resume intel_menlow: - reduce code duplication asus-wmi: - provide access to ALS control ideapad-laptop: - add a new WMI string for ESC key surfacepro3_button: - Add a warning when switching to tablet mode sony-laptop: - Avoid oops on module unload for older laptops intel_telemetry: - Constify telemetry_core_ops structures fujitsu-laptop: - Use IS_ENABLED() instead of checking for built-in or module asus-laptop: - correct error handling in sysfs_acpi_set - remove redundant initializers - correct error handling in asus_read_brightness() fujitsu-laptop: - Support radio LED" * tag 'platform-drivers-x86-v4.7-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: platform/x86: Add PMC Driver for Intel Core SoC dell-rbtn: Ignore ACPI notifications if device is suspended thinkpad_acpi: save kbdlight state on suspend and restore it on resume intel_menlow: reduce code duplication asus-wmi: provide access to ALS control ideapad-laptop: add a new WMI string for ESC key surfacepro3_button: Add a warning when switching to tablet mode sony-laptop: Avoid oops on module unload for older laptops intel_telemetry: Constify telemetry_core_ops structures fujitsu-laptop: Use IS_ENABLED() instead of checking for built-in or module asus-laptop: correct error handling in sysfs_acpi_set asus-laptop: remove redundant initializers asus-laptop: correct error handling in asus_read_brightness() fujitsu-laptop: Support radio LED
| * | | platform/x86: Add PMC Driver for Intel Core SoCRajneesh Bhardwaj2016-05-271-0/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the Power Management Controller driver as a PCI driver for Intel Core SoC architecture. This driver can utilize debugging capabilities and supported features as exposed by the Power Management Controller. Please refer to the below specification for more details on PMC features. http://www.intel.in/content/www/in/en/chipsets/100-series-chipset-datasheet-vol-2.html The current version of this driver exposes SLP_S0_RESIDENCY counter. This counter can be used for detecting fragile SLP_S0 signal related failures and take corrective actions when PCH SLP_S0 signal is not asserted after kernel freeze as part of suspend to idle flow (echo freeze > /sys/power/state). Intel Platform Controller Hub (PCH) asserts SLP_S0 signal when it detects favorable conditions to enter its low power mode. As a pre-requisite the SoC should be in deepest possible Package C-State and devices should be in low power mode. For example, on Skylake SoC the deepest Package C-State is Package C10 or PC10. Suspend to idle flow generally leads to PC10 state but PC10 state may not be sufficient for realizing the platform wide power potential which SLP_S0 signal assertion can provide. SLP_S0 signal is often connected to the Embedded Controller (EC) and the Power Management IC (PMIC) for other platform power management related optimizations. In general, SLP_S0 assertion == PC10 + PCH low power mode + ModPhy Lanes power gated + PLL Idle. As part of this driver, a mechanism to read the SLP_S0_RESIDENCY is exposed as an API and also debugfs features are added to indicate SLP_S0 signal assertion residency in microseconds. echo freeze > /sys/power/state wake the system cat /sys/kernel/debug/pmc_core/slp_s0_residency_usec Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com> Signed-off-by: Vishwanath Somayaji <vishwanath.somayaji@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
| * | | intel_telemetry: Constify telemetry_core_ops structuresJulia Lawall2016-05-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The telemetry_core_ops structures are never modified, so declare them as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
* | | | Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2016-05-273-23/+73
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull second batch of KVM updates from Radim Krčmář: "General: - move kvm_stat tool from QEMU repo into tools/kvm/kvm_stat (kvm_stat had nothing to do with QEMU in the first place -- the tool only interprets debugfs) - expose per-vm statistics in debugfs and support them in kvm_stat (KVM always collected per-vm statistics, but they were summarised into global statistics) x86: - fix dynamic APICv (VMX was improperly configured and a guest could access host's APIC MSRs, CVE-2016-4440) - minor fixes ARM changes from Christoffer Dall: - new vgic reimplementation of our horribly broken legacy vgic implementation. The two implementations will live side-by-side (with the new being the configured default) for one kernel release and then we'll remove the legacy one. - fix for a non-critical issue with virtual abort injection to guests" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (70 commits) tools: kvm_stat: Add comments tools: kvm_stat: Introduce pid monitoring KVM: Create debugfs dir and stat files for each VM MAINTAINERS: Add kvm tools tools: kvm_stat: Powerpc related fixes tools: Add kvm_stat man page tools: Add kvm_stat vm monitor script kvm:vmx: more complete state update on APICv on/off KVM: SVM: Add more SVM_EXIT_REASONS KVM: Unify traced vector format svm: bitwise vs logical op typo KVM: arm/arm64: vgic-new: Synchronize changes to active state KVM: arm/arm64: vgic-new: enable build KVM: arm/arm64: vgic-new: implement mapped IRQ handling KVM: arm/arm64: vgic-new: Wire up irqfd injection KVM: arm/arm64: vgic-new: Add vgic_v2/v3_enable KVM: arm/arm64: vgic-new: vgic_init: implement map_resources KVM: arm/arm64: vgic-new: vgic_init: implement vgic_init KVM: arm/arm64: vgic-new: vgic_init: implement vgic_create KVM: arm/arm64: vgic-new: vgic_init: implement kvm_vgic_hyp_init ...
| * | | | kvm:vmx: more complete state update on APICv on/offRoman Kagan2016-05-251-18/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The function to update APICv on/off state (in particular, to deactivate it when enabling Hyper-V SynIC) is incomplete: it doesn't adjust APICv-related fields among secondary processor-based VM-execution controls. As a result, Windows 2012 guests get stuck when SynIC-based auto-EOI interrupt intersected with e.g. an IPI in the guest. In addition, the MSR intercept bitmap isn't updated every time "virtualize x2APIC mode" is toggled. This path can only be triggered by a malicious guest, because Windows didn't use x2APIC but rather their own synthetic APIC access MSRs; however a guest running in a SynIC-enabled VM could switch to x2APIC and thus obtain direct access to host APIC MSRs (CVE-2016-4440). The patch fixes those omissions. Signed-off-by: Roman Kagan <rkagan@virtuozzo.com> Reported-by: Steve Rutherford <srutherford@google.com> Reported-by: Yang Zhang <yang.zhang.wz@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
| * | | | KVM: SVM: Add more SVM_EXIT_REASONSJan Kiszka2016-05-241-3/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Useful when tracing nested setups where the guest may trigger more than the host usually does. But even some typical host exits were missing. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
| * | | | svm: bitwise vs logical op typoDan Carpenter2016-05-241-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These were supposed to be a bitwise operation but there is a typo. The result is mostly harmless, but sparse correctly complains. Fixes: 44a95dae1d22 ('KVM: x86: Detect and Initialize AVIC support') Fixes: 18f40c53e10f ('svm: Add VMEXIT handlers for AVIC') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* | | | | Merge branch 'kbuild' of ↵Linus Torvalds2016-05-264-6/+2
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kbuild updates from Michal Marek: - new option CONFIG_TRIM_UNUSED_KSYMS which does a two-pass build and unexports symbols which are not used in the current config [Nicolas Pitre] - several kbuild rule cleanups [Masahiro Yamada] - warning option adjustments for gcov etc [Arnd Bergmann] - a few more small fixes * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: (31 commits) kbuild: move -Wunused-const-variable to W=1 warning level kbuild: fix if_change and friends to consider argument order kbuild: fix adjust_autoksyms.sh for modules that need only one symbol kbuild: fix ksym_dep_filter when multiple EXPORT_SYMBOL() on the same line gcov: disable -Wmaybe-uninitialized warning gcov: disable tree-loop-im to reduce stack usage gcov: disable for COMPILE_TEST Kbuild: disable 'maybe-uninitialized' warning for CONFIG_PROFILE_ALL_BRANCHES Kbuild: change CC_OPTIMIZE_FOR_SIZE definition kbuild: forbid kernel directory to contain spaces and colons kbuild: adjust ksym_dep_filter for some cmd_* renames kbuild: Fix dependencies for final vmlinux link kbuild: better abstract vmlinux sequential prerequisites kbuild: fix call to adjust_autoksyms.sh when output directory specified kbuild: Get rid of KBUILD_STR kbuild: rename cmd_as_s_S to cmd_cpp_s_S kbuild: rename cmd_cc_i_c to cmd_cpp_i_c kbuild: drop redundant "PHONY += FORCE" kbuild: delete unnecessary "@:" kbuild: mark help target as PHONY ...
| * | | | | kbuild: delete unnecessary "@:"Masahiro Yamada2016-04-203-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 2aedcd098a94 ('kbuild: suppress annoying "... is up to date." message'), $(call if_changed,...) is evaluated to "@:" when there is nothing to do. We no longer need to add "@:" after $(call if_changed,...) to suppress "... is up to date." message. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Michal Marek <mmarek@suse.com>
| * | | | | kbuild: drop FORCE from PHONY targetsMasahiro Yamada2016-04-201-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These targets are marked as PHONY. No need to add FORCE to their dependency. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Michal Marek <mmarek@suse.com>
* | | | | | Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds2016-05-2511-27/+85
|\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes: EFI, entry code, pkeys and MPX fixes, TASK_SIZE cleanups and a tsc frequency table fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Switch from TASK_SIZE to TASK_SIZE_MAX in the page fault code x86/fsgsbase/64: Use TASK_SIZE_MAX for FSBASE/GSBASE upper limits x86/mm/mpx: Work around MPX erratum SKD046 x86/entry/64: Fix stack return address retrieval in thunk x86/efi: Fix 7-parameter efi_call()s x86/cpufeature, x86/mm/pkeys: Fix broken compile-time disabling of pkeys x86/tsc: Add missing Cherrytrail frequency to the table
| * | | | | | x86/mm: Switch from TASK_SIZE to TASK_SIZE_MAX in the page fault codeAndy Lutomirski2016-05-201-3/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | x86's page fault handlers had two TASK_SIZE uses that should have been TASK_SIZE_MAX. I don't think that either one had a visible effect, but this makes the code clearer and should save a few bytes of text. (And I eventually want to eradicate TASK_SIZE. This will help.) Reported-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Dmitry Safonov <0x7f454c46@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ruslan Kabatsayev <b7.10110111@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1242fb23b0d05c3069dbf5758ac55d26bc114bef.1462914565.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
| * | | | | | x86/fsgsbase/64: Use TASK_SIZE_MAX for FSBASE/GSBASE upper limitsAndy Lutomirski2016-05-202-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The GSBASE upper limit exists to prevent user code from confusing the paranoid idtentry path. The FSBASE upper limit is just for consistency. There's no need to enforce a smaller limit for 32-bit tasks. Just use TASK_SIZE_MAX. This simplifies the logic and will save a few bytes of code. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/5357f2fe0f103eabf005773b70722451eab09a89.1462897104.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
| * | | | | | Merge branch 'linus' into x86/urgent, to refresh the treeIngo Molnar2016-05-20201-3735/+6867
| |\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Ingo Molnar <mingo@kernel.org>
| * | | | | | | x86/mm/mpx: Work around MPX erratum SKD046Dave Hansen2016-05-203-0/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This erratum essentially causes the CPU to forget which privilege level it is operating on (kernel vs. user) for the purposes of MPX. This erratum can only be triggered when a system is not using Supervisor Mode Execution Prevention (SMEP). Our workaround for the erratum is to ensure that MPX can only be used in cases where SMEP is present in the processor and is enabled. This erratum only affects Core processors. Atom is unaffected. But, there is no architectural way to determine Atom vs. Core. So, we just apply this workaround to all processors. It's possible that it will mistakenly disable MPX on some Atom processsors or future unaffected Core processors. There are currently no processors that have MPX and not SMEP. It would take something akin to a hypervisor masking SMEP out on an Atom processor for this to present itself on current hardware. More details can be found at: http://www.intel.com/content/dam/www/public/us/en/documents/specification-updates/desktop-6th-gen-core-family-spec-update.pdf " SKD046 Branch Instructions May Initialize MPX Bound Registers Incorrectly Problem: Depending on the current Intel MPX (Memory Protection Extensions) configuration, execution of certain branch instructions (near CALL, near RET, near JMP, and Jcc instructions) without a BND prefix (F2H) initialize the MPX bound registers. Due to this erratum, such a branch instruction that is executed both with CPL = 3 and with CPL < 3 may not use the correct MPX configuration register (BNDCFGU or BNDCFGS, respectively) for determining whether to initialize the bound registers; it may thus initialize the bound registers when it should not, or fail to initialize them when it should. Implication: A branch instruction that has executed both in user mode and in supervisor mode (from the same linear address) may cause a #BR (bound range fault) when it should not have or may not cause a #BR when it should have. Workaround An operating system can avoid this erratum by setting CR4.SMEP[bit 20] to enable supervisor-mode execution prevention (SMEP). When SMEP is enabled, no code can be executed both with CPL = 3 and with CPL < 3. " Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave@sr71.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20160512220400.3B35F1BC@viggo.jf.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
| * | | | | | | x86/entry/64: Fix stack return address retrieval in thunkJosh Poimboeuf2016-05-191-6/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With CONFIG_FRAME_POINTER enabled, a thunk can pass a bad return address value to the called function. '9*8(%rsp)' actually gets the frame pointer, not the return address. The only users of the 'put_ret_addr_in_rdi' option are two functions which trace the enabling and disabling of interrupts, so this bug can result in bad debug or tracing information with CONFIG_IRQSOFF_TRACER or CONFIG_PROVE_LOCKING. Fix this by implementing the suggestion of Linus: explicitly push the frame pointer all the time and constify the stack offsets that way. This is both correct and easier to read. Reported-by: Matt Fleming <matt@codeblueprint.co.uk> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> [ Extended the changelog a bit. ] Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Alex Thorlton <athorlton@sgi.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 058fb73274f9 ("x86/asm/entry: Create stack frames in thunk functions") Link: http://lkml.kernel.org/r/20160517180606.v5o7wcgdni7443ol@treble Signed-off-by: Ingo Molnar <mingo@kernel.org>
| * | | | | | | x86/efi: Fix 7-parameter efi_call()sLinus Torvalds2016-05-171-5/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Alex Thorlton reported that the SGI/UV code crashes in the efi_call() code when invoked with 7 parameters, due to: mov (%rsp), %rax mov 8(%rax), %rax ... mov %rax, 40(%rsp) Offset 8 is only true if CONFIG_FRAME_POINTERS is disabled, with frame pointers enabled it should be 16. Furthermore, the SAVE_XMM code saves the old stack pointer, but that's just crazy. It saves the stack pointer *AFTER* we've done the: FRAME_BEGIN ... which will have *changed* the stack pointer, depending on whether stack frames are enabled or not. So when the code then does: mov (%rsp), %rax ... we now move that old stack pointer into %rax, but the offset off that stack pointer will depend on whether that FRAME_BEGIN saved off %rbp or not. So that whole 8-vs-16 offset confusion depends on the frame pointer! If frame pointers were enabled, it will be 16. If they weren't, it will be 8. The right fix is to just get rid of that silly conditional frame pointer thing, and always use frame pointers in this stub function. And then we don't need that (odd) load to get the old stack pointer into %rax - we can just use the frame pointer. Reported-by: Alex Thorlton <athorlton@sgi.com> Tested-by: Alex Thorlton <athorlton@sgi.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/CA%2B55aFzBS2v%3DWnEH83cUDg7XkOremFqJ30BJwF40dCYjReBkUQ@mail.gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
| * | | | | | | x86/cpufeature, x86/mm/pkeys: Fix broken compile-time disabling of pkeysDave Hansen2016-05-163-9/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When I added support for the Memory Protection Keys processor feature, I had to reindent the REQUIRED/DISABLED_MASK macros, and also consult the later cpufeature words. I'm not quite sure how I bungled it, but I consulted the wrong word at the end. This only affected required or disabled cpu features in cpufeature words 14, 15 and 16. So, only Protection Keys itself was screwed over here. The result was that if you disabled pkeys in your .config, you might still see some code show up that should have been compiled out. There should be no functional problems, though. In verifying this patch I also realized that the DISABLE_PKU/OSPKE macros were defined backwards and that the cpu_has() check in setup_pku() was not doing the compile-time disabled checks. So also fix the macro for DISABLE_PKU/OSPKE and add a compile-time check for pkeys being enabled in setup_pku(). Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: <stable@vger.kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Dave Hansen <dave@sr71.net> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Fixes: dfb4a70f20c5 ("x86/cpufeature, x86/mm/pkeys: Add protection keys related CPUID definitions") Link: http://lkml.kernel.org/r/20160513221328.C200930B@viggo.jf.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
| * | | | | | | x86/tsc: Add missing Cherrytrail frequency to the tableJeremy Compostella2016-05-121-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Intel Cherrytrail is based on Airmont core so MSR_FSB_FREQ[2:0] = 4 means that the CPU reference clock runs at 80MHz. Add this missing frequency to the table. Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Link: http://lkml.kernel.org/r/87y47gty89.fsf@intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* | | | | | | | Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds2016-05-253-9/+9
|\ \ \ \ \ \ \ \ | | |_|_|_|_|_|/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Ingo Molnar: "Mostly tooling and PMU driver fixes, but also a number of late updates such as the reworking of the call-chain size limiting logic to make call-graph recording more robust, plus tooling side changes for the new 'backwards ring-buffer' extension to the perf ring-buffer" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits) perf record: Read from backward ring buffer perf record: Rename variable to make code clear perf record: Prevent reading invalid data in record__mmap_read perf evlist: Add API to pause/resume perf trace: Use the ptr->name beautifier as default for "filename" args perf trace: Use the fd->name beautifier as default for "fd" args perf report: Add srcline_from/to branch sort keys perf evsel: Record fd into perf_mmap perf evsel: Add overwrite attribute and check write_backward perf tools: Set buildid dir under symfs when --symfs is provided perf trace: Only auto set call-graph to "dwarf" when syscalls are being traced perf annotate: Sort list of recognised instructions perf annotate: Fix identification of ARM blt and bls instructions perf tools: Fix usage of max_stack sysctl perf callchain: Stop validating callchains by the max_stack sysctl perf trace: Fix exit_group() formatting perf top: Use machine->kptr_restrict_warned perf trace: Warn when trying to resolve kernel addresses with kptr_restrict=1 perf machine: Do not bail out if not managing to read ref reloc symbol perf/x86/intel/p4: Trival indentation fix, remove space ...
| * | | | | | | perf/x86/intel/p4: Trival indentation fix, remove spaceColin Ian King2016-05-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove an extraneous space to fix up indentation. Trivial and no functional change Signed-off-by: Colin Ian King <colin.king@canonical.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1463503215-18339-1-git-send-email-colin.king@canonical.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
| * | | | | | | Merge tag 'perf-core-for-mingo-20160516' of ↵Ingo Molnar2016-05-201-7/+7
| |\ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: User visible changes: - Honour the kernel.perf_event_max_stack knob more precisely by not counting PERF_CONTEXT_{KERNEL,USER} when deciding when to stop adding entries to the perf_sample->ip_callchain[] array (Arnaldo Carvalho de Melo) - Fix identation of 'stalled-backend-cycles' in 'perf stat' (Namhyung Kim) - Update runtime using 'cpu-clock' event in 'perf stat' (Namhyung Kim) - Use 'cpu-clock' for cpu targets in 'perf stat' (Namhyung Kim) - Avoid fractional digits for integer scales in 'perf stat' (Andi Kleen) - Store vdso buildid unconditionally, as it appears in callchains and we're not checking those when creating the build-id table, so we end up not being able to resolve VDSO symbols when doing analysis on a different machine than the one where recording was done, possibly of a different arch even (arm -> x86_64) (He Kuang) Infrastructure changes: - Generalize max_stack sysctl handler, will be used for configuring multiple kernel knobs related to callchains (Arnaldo Carvalho de Melo) Cleanups: - Introduce DSO__NAME_KALLSYMS and DSO__NAME_KCORE, to stop using open coded strings (Masami Hiramatsu) Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
OpenPOWER on IntegriCloud