summaryrefslogtreecommitdiffstats
path: root/arch/x86/pci/acpi.c
Commit message (Collapse)AuthorAgeFilesLines
* X86: drivers: remove __dev* attributes.Greg Kroah-Hartman2013-01-031-6/+5
| | | | | | | | | | | | | | | | | | | CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Daniel Drake <dsd@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge branch 'pci/mike-x86-tra' into nextBjorn Helgaas2012-11-091-3/+18
|\ | | | | | | | | * pci/mike-x86-tra: x86/PCI: Allow x86 platforms to use translation offsets
| * x86/PCI: Allow x86 platforms to use translation offsetsMike Yoknis2012-11-071-3/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The memory range descriptors in the _CRS control method contain an address translation offset for host bridges. This value is used to translate addresses across the bridge. The support to use _TRA values is present for other architectures but not for X86 platforms. For existing X86 platforms the _TRA value is zero. Non-zero _TRA values are expected on future X86 platforms. This change will register that value with the resource. Signed-off-by: Mike Yoknis <mike.yoknis@hp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* | x86/PCI: Ignore _SEG on HP xw9300Bjorn Helgaas2012-11-071-2/+23
|/ | | | | | | | | | | | | | | | | | | | | | | | | | The xw9300 BIOS supplies _SEG methods that are incorrect, which results in some LSI SCSI devices not being discovered. This adds a quirk to ignore _SEG on this machine and default to zero. The xw9300 has three host bridges: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) ACPI: PCI Root Bridge [PCI1] (domain 0001 [bus 40-7f]) ACPI: PCI Root Bridge [PCI2] (domain 0002 [bus 80-ff]) When the BIOS "ACPI Bus Segmentation" option is enabled (as it is by default), the _SEG methods of the PCI1 and PCI2 bridges return 1 and 2, respectively. However, the BIOS implementation appears to be incomplete, and we can't enumerate devices in those domains. But if we assume PCI1 and PCI2 really lead to buses in domain 0, everything works fine. Windows XP and Vista also seem to ignore these _SEG methods. Reference: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=543308 Reference: https://bugzilla.kernel.org/show_bug.cgi?id=15362 Reported-and-Tested-by: Sean M. Pappalardo <pegasus@renegadetech.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* x86/PCI: Clear host bridge aperture struct resourceYinghai Lu2012-09-211-2/+1
| | | | | | | | | Use kzalloc() so the struct resource doesn't contain garbage in fields we don't initialize. [bhelgaas: changelog] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: x86@kernel.org
* x86/PCI: get rid of redundant log messagesJiang Liu2012-06-221-7/+0
| | | | | | | | | | | | For each resource of a PCI host bridge, the arch code and PCI code log following messages. We don't need both, so drop the arch-specific printing. pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af] pci_bus 0000:00: root bus resource [io 0x0000-0x03af] Reviewed-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jiang Liu <liuj97@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* x86/PCI: update MMCONFIG information when hot-plugging PCI host bridgesJiang Liu2012-06-221-3/+90
| | | | | | | | This patch enhances x86 arch-specific code to update MMCONFIG information when PCI host bridge hotplug event happens. Reviewed-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jiang Liu <liuj97@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* x86/PCI: use _CRS bus number aperture for host bridges from ACPIYinghai Lu2012-06-131-4/+5
| | | | | | | | | | | | Add the host bridge bus number aperture from _CRS to the resource list. Like the MMIO and I/O port apertures, this will be used when assigning resources to hot-added devices or in the case of conflicts. Note that we always use the _CRS bus number aperture, even if we're ignoring _CRS otherwise. [bhelgaas: changelog] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* PCI: replace struct pci_bus secondary/subordinate with busn_resYinghai Lu2012-06-131-1/+1
| | | | | | | | | Replace the struct pci_bus secondary/subordinate members with the struct resource busn_res. Later we'll build a resource tree of these bus numbers. [bhelgaas: changelog] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* resources: add resource_overlaps()Wei Yang2012-05-071-11/+1
| | | | | | | | | Add resource_overlaps(), which returns true if two resources overlap at all. Use this to replace the complicated check in coalesce_windows(). Signed-Off-By: Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* x86/PCI: embed pci_sysdata into pci_root_info on ACPI pathYinghai Lu2012-04-301-17/+4
| | | | | | | Embed the x86 struct pci_sysdata in the struct pci_root_info so it will be automatically freed in the remove path. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* x86/PCI: embed name into pci_root_info structYinghai Lu2012-04-301-5/+2
| | | | | | | | We now keep the pci_root_info struct for the entire lifetime of the host bridge, so just embed the name in the struct rather than allocating it separately. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* x86/PCI: add host bridge resource release for _CRS pathYinghai Lu2012-04-301-12/+51
| | | | | | | | | | 1. Allocate pci_root_info instead of using stack. We need to pass around info for release function. 2. Add release_pci_root_info 3. Set x86 host bridge release function to make sure root bridge related resources get freed during root bus removal. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* x86/PCI: refactor get_current_resources()Yinghai Lu2012-04-301-21/+13
| | | | | | | | | | Rename get_current_resources() to probe_pci_root_info. 1. Remove resource list head from pci_root_info 2. Make get_current_resources() not pass resources 3. Rename get_current_resources() to probe_pci_root_info() Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* x86/PCI: fix memleak with get_current_resources()Yinghai Lu2012-04-301-19/+30
| | | | | | | | | | | | | In pci_scan_acpi_root(), when pci_use_crs is set, get_current_resources() is used to get pci_root_info, and it will allocate name and resource array. Later if pci_create_root_bus() can not create bus (could be already there...) it will only free bus res list, but the name and res array is not freed. Let get_current_resource() take info pointer instead of using local info. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* Merge branch 'linux-next' of ↵Linus Torvalds2012-03-231-1/+6
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci Pull PCI changes (including maintainer change) from Jesse Barnes: "This pull has some good cleanups from Bjorn and Yinghai, as well as some more code from Yinghai to better handle resource re-allocation when enabled. There's also a new initcall_debug feature from Arjan which will print out quirk timing information to help identify slow quirks for fixing or refinement (Yinghai sent in a few patches to do just that once the new debug code landed). Beyond that, I'm handing off PCI maintainership to Bjorn Helgaas. He's been a core PCI and Linux contributor for some time now, and has kindly volunteered to take over. I just don't feel I have the time for PCI review and work that it deserves lately (I've taken on some other projects), and haven't been as responsive lately as I'd like, so I approached Bjorn asking if he'd like to manage things. He's going to give it a try, and I'm confident he'll do at least as well as I have in keeping the tree managed, patches flowing, and keeping things stable." Fix up some fairly trivial conflicts due to other cleanups (mips device resource fixup cleanups clashing with list handling cleanup, ppc iseries removal clashing with pci_probe_only cleanup etc) * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci: (112 commits) PCI: Bjorn gets PCI hotplug too PCI: hand PCI maintenance over to Bjorn Helgaas unicore32/PCI: move <asm-generic/pci-bridge.h> include to asm/pci.h sparc/PCI: convert devtree and arch-probed bus addresses to resource powerpc/PCI: allow reallocation on PA Semi powerpc/PCI: convert devtree bus addresses to resource powerpc/PCI: compute I/O space bus-to-resource offset consistently arm/PCI: don't export pci_flags PCI: fix bridge I/O window bus-to-resource conversion x86/PCI: add spinlock held check to 'pcibios_fwaddrmap_lookup()' PCI / PCIe: Introduce command line option to disable ARI PCI: make acpihp use __pci_remove_bus_device instead PCI: export __pci_remove_bus_device PCI: Rename pci_remove_behind_bridge to pci_stop_and_remove_behind_bridge PCI: Rename pci_remove_bus_device to pci_stop_and_remove_bus_device PCI: print out PCI device info along with duration PCI: Move "pci reassigndev resource alignment" out of quirks.c PCI: Use class for quirk for usb host controller fixup PCI: Use class for quirk for ti816x class fixup PCI: Use class for quirk for intel e100 interrupt fixup ...
| * x86/PCI: don't fall back to defaults if _CRS has no aperturesBjorn Helgaas2012-02-141-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Host bridges that lead to things like the Uncore need not have any I/O port or MMIO apertures. For example, in this case: ACPI: PCI Root Bridge [UNC1] (domain 0000 [bus ff]) PCI: root bus ff: using default resources PCI host bridge to bus 0000:ff pci_bus 0000:ff: root bus resource [io 0x0000-0xffff] pci_bus 0000:ff: root bus resource [mem 0x00000000-0x3fffffffffff] we should not pretend those default resources are available on bus ff. CC: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | x86/PCI: do not tie MSI MS-7253 use_crs quirk to BIOS versionJonathan Nieder2012-03-011-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Carlos was getting WARNING: at drivers/pci/pci.c:118 pci_ioremap_bar+0x24/0x52() when probing his sound card, and sound did not work. After adding pci=use_crs to the kernel command line, no more trouble. Ok, we can add a quirk. dmidecode output reveals that this is an MSI MS-7253, for which we already have a quirk, but the short-sighted author tied the quirk to a single BIOS version, making it not kick in on Carlos's machine with BIOS V1.2. If a later BIOS update makes it no longer necessary to look at the _CRS info it will still be harmless, so let's stop trying to guess which versions have and don't have accurate _CRS tables. Addresses https://bugtrack.alsa-project.org/alsa-bug/view.php?id=5533 Also see <https://bugzilla.kernel.org/show_bug.cgi?id=42619>. Reported-by: Carlos Luna <caralu74@gmail.com> Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | x86/PCI: use host bridge _CRS info on MSI MS-7253Jonathan Nieder2012-02-281-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the spirit of commit 29cf7a30f8a0 ("x86/PCI: use host bridge _CRS info on ASUS M2V-MX SE"), this DMI quirk turns on "pci_use_crs" by default on a board that needs it. This fixes boot failures and oopses introduced in 3e3da00c01d0 ("x86/pci: AMD one chain system to use pci read out res"). The quirk is quite targetted (to a specific board and BIOS version) for two reasons: (1) to emphasize that this method of tackling the problem one quirk at a time is a little insane (2) to give BIOS vendors an opportunity to use simpler tables and allow us to return to generic behavior (whatever that happens to be) with a later BIOS update In other words, I am not at all happy with having quirks like this. But it is even worse for the kernel not to work out of the box on these machines, so... Reference: https://bugzilla.kernel.org/show_bug.cgi?id=42619 Reported-by: Svante Signell <svante.signell@telia.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | PCI: fix memleak when ACPI _CRS is not used.Yinghai Lu2012-02-231-5/+7
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | warning: unreferenced object 0xffff8801f6914200 (size 512): comm "swapper/0", pid 1, jiffies 4294893643 (age 2664.644s) hex dump (first 32 bytes): 00 00 c0 fe 00 00 00 00 ff ff ff ff 00 00 00 00 ................ 60 58 2f f6 03 88 ff ff 00 02 00 00 00 00 00 00 `X/............. backtrace: [<ffffffff81c2408c>] kmemleak_alloc+0x26/0x43 [<ffffffff8113764f>] __kmalloc+0x121/0x183 [<ffffffff81ca8d93>] get_current_resources+0x5a/0xc6 [<ffffffff81c5bedd>] pci_acpi_scan_root+0x13c/0x21c [<ffffffff81c2a745>] acpi_pci_root_add+0x1e1/0x421 [<ffffffff81408f50>] acpi_device_probe+0x50/0x190 [<ffffffff8149edc7>] really_probe+0x99/0x126 [<ffffffff8149ef83>] driver_probe_device+0x3b/0x56 [<ffffffff8149effd>] __driver_attach+0x5f/0x82 [<ffffffff8149d860>] bus_for_each_dev+0x5c/0x88 [<ffffffff8149eb87>] driver_attach+0x1e/0x20 [<ffffffff8149e7cc>] bus_add_driver+0xca/0x21d [<ffffffff8149f47b>] driver_register+0x91/0xfe [<ffffffff81409d09>] acpi_bus_register_driver+0x43/0x45 [<ffffffff8278bdc9>] acpi_pci_root_init+0x20/0x28 [<ffffffff810001e7>] do_one_initcall+0x57/0x134 The system has _CRS for root buses, but they are not used because the machine date is before the cutoff date for _CRS usage. Try to free those unused resource arrays and names. Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* x86/PCI: convert to pci_create_root_bus() and pci_scan_root_bus()Bjorn Helgaas2012-01-061-14/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | x86 has two kinds of PCI root bus scanning: (1) ACPI-based, using _CRS resources. This used pci_create_bus(), not pci_scan_bus(), because ACPI hotplug needed to split the pci_bus_add_devices() into a separate host bridge .start() method. This patch parses the _CRS resources earlier, so we can build a list of resources and pass it to pci_create_root_bus(). Note that as before, we parse the _CRS even if we aren't going to use it so we can print it for debugging purposes. (2) All other, which used either default resources (ioport_resource and iomem_resource) or information read from the hardware via amd_bus.c or similar. This used pci_scan_bus(). This patch converts x86_pci_root_bus_res_quirks() (previously called from pcibios_fixup_bus()) to x86_pci_root_bus_resources(), which builds a list of resources before we call pci_scan_root_bus(). We also use x86_pci_root_bus_resources() if we have ACPI but are ignoring _CRS. CC: Yinghai Lu <yinghai.lu@oracle.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* x86/PCI: Ignore CPU non-addressable _CRS reserved memory resourcesGary Hade2012-01-061-2/+16
| | | | | | | | | | | | | | | | | This assures that a _CRS reserved host bridge window or window region is not used if it is not addressable by the CPU. The new code either trims the window to exclude the non-addressable portion or totally ignores the window if the entire window is non-addressable. The current code has been shown to be problematic with 32-bit non-PAE kernels on systems where _CRS reserves resources above 4GB. Signed-off-by: Gary Hade <garyhade@us.ibm.com> Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Thomas Renninger <trenn@novell.com> Cc: linux-kernel@vger.kernel.org Cc: stable@kernel.org Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: Add Thinkpad SL510 to pci=nocrs blacklistDave Jones2012-01-061-0/+10
| | | | | | | | | Enabling CRS by default breaks suspend on the Thinkpad SL510. Details in https://bugzilla.redhat.com/show_bug.cgi?id=769657 Reported-by: Stefan Kirrmann <stefan.kirrmann@gmail.com> Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: Add Dell Studio 1557 to pci=nocrs blacklistDave Jones2012-01-061-0/+12
| | | | | | | | | The Dell Studio 1557 also doesn't suspend correctly when CRS is enabled. Details at https://bugzilla.redhat.com/show_bug.cgi?id=769657 Reported-by: Gregory S. Hoerner <ghoerner@transcendingthought.com> Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: add set_nouse_crs for use by a pci=nocrs blacklistDave Jones2012-01-061-0/+7
| | | | | | | | | | | | | | | | Some machines don't boot unless passed pci=nocrs. (See https://bugzilla.redhat.com/show_bug.cgi?id=770308 for details of one report. Waiting on dmidecode output for others). Currently there is a DMI whitelist, even though the default is on. v2: drop the 1536 blacklist entry, superceded by the PNP/MMCONFIG changes from Bjorn Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* x86/PCI: use host bridge _CRS info on ASUS M2V-MX SEPaul Menzel2011-10-061-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In summary, this DMI quirk uses the _CRS info by default for the ASUS M2V-MX SE by turning on `pci=use_crs` and is similar to the quirk added by commit 2491762cfb47 ("x86/PCI: use host bridge _CRS info on ASRock ALiveSATA2-GLAN") whose commit message should be read for further information. Since commit 3e3da00c01d0 ("x86/pci: AMD one chain system to use pci read out res") Linux gives the following oops: parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] HDA Intel 0000:20:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 HDA Intel 0000:20:01.0: setting latency timer to 64 BUG: unable to handle kernel paging request at ffffc90011c08000 IP: [<ffffffffa0578402>] azx_probe+0x3ad/0x86b [snd_hda_intel] PGD 13781a067 PUD 13781b067 PMD 1300ba067 PTE 800000fd00000173 Oops: 0009 [#1] SMP last sysfs file: /sys/module/snd_pcm/initstate CPU 0 Modules linked in: snd_hda_intel(+) snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event tpm_tis tpm snd_seq tpm_bios psmouse parport_pc snd_timer snd_seq_device parport processor evdev snd i2c_viapro thermal_sys amd64_edac_mod k8temp i2c_core soundcore shpchp pcspkr serio_raw asus_atk0110 pci_hotplug edac_core button snd_page_alloc edac_mce_amd ext3 jbd mbcache sha256_generic cryptd aes_x86_64 aes_generic cbc dm_crypt dm_mod raid1 md_mod usbhid hid sg sd_mod crc_t10dif sr_mod cdrom ata_generic uhci_hcd sata_via pata_via libata ehci_hcd usbcore scsi_mod via_rhine mii nls_base [last unloaded: scsi_wait_scan] Pid: 1153, comm: work_for_cpu Not tainted 2.6.37-1-amd64 #1 M2V-MX SE/System Product Name RIP: 0010:[<ffffffffa0578402>] [<ffffffffa0578402>] azx_probe+0x3ad/0x86b [snd_hda_intel] RSP: 0018:ffff88013153fe50 EFLAGS: 00010286 RAX: ffffc90011c08000 RBX: ffff88013029ec00 RCX: 0000000000000006 RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000246 RBP: ffff88013341d000 R08: 0000000000000000 R09: 0000000000000040 R10: 0000000000000286 R11: 0000000000003731 R12: ffff88013029c400 R13: 0000000000000000 R14: 0000000000000000 R15: ffff88013341d090 FS: 0000000000000000(0000) GS:ffff8800bfc00000(0000) knlGS:00000000f7610ab0 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffffc90011c08000 CR3: 0000000132f57000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process work_for_cpu (pid: 1153, threadinfo ffff88013153e000, task ffff8801303c86c0) Stack: 0000000000000005 ffffffff8123ad65 00000000000136c0 ffff88013029c400 ffff8801303c8998 ffff88013341d000 ffff88013341d090 ffff8801322d9dc8 ffff88013341d208 0000000000000000 0000000000000000 ffffffff811ad232 Call Trace: [<ffffffff8123ad65>] ? __pm_runtime_set_status+0x162/0x186 [<ffffffff811ad232>] ? local_pci_probe+0x49/0x92 [<ffffffff8105afc5>] ? do_work_for_cpu+0x0/0x1b [<ffffffff8105afc5>] ? do_work_for_cpu+0x0/0x1b [<ffffffff8105afd0>] ? do_work_for_cpu+0xb/0x1b [<ffffffff8105fd3f>] ? kthread+0x7a/0x82 [<ffffffff8100a824>] ? kernel_thread_helper+0x4/0x10 [<ffffffff8105fcc5>] ? kthread+0x0/0x82 [<ffffffff8100a820>] ? kernel_thread_helper+0x0/0x10 Code: f4 01 00 00 ef 31 f6 48 89 df e8 29 dd ff ff 85 c0 0f 88 2b 03 00 00 48 89 ef e8 b4 39 c3 e0 8b 7b 40 e8 fc 9d b1 e0 48 8b 43 38 <66> 8b 10 66 89 14 24 8b 43 14 83 e8 03 83 f8 01 77 32 31 d2 be RIP [<ffffffffa0578402>] azx_probe+0x3ad/0x86b [snd_hda_intel] RSP <ffff88013153fe50> CR2: ffffc90011c08000 ---[ end trace 8d1f3ebc136437fd ]--- Trusting the ACPI _CRS information (`pci=use_crs`) fixes this problem. $ dmesg | grep -i crs # with the quirk PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug The match has to be against the DMI board entries though since the vendor entries are not populated. DMI: System manufacturer System Product Name/M2V-MX SE, BIOS 0304 10/30/2007 This quirk should be removed when `pci=use_crs` is enabled for machines from 2006 or earlier or some other solution is implemented. Using coreboot [1] with this board the problem does not exist but this quirk also does not affect it either. To be safe though the check is tightened to only take effect when the BIOS from American Megatrends is used. 15:13 < ruik> but coreboot does not need that 15:13 < ruik> because i have there only one root bus 15:13 < ruik> the audio is behind a bridge $ sudo dmidecode BIOS Information Vendor: American Megatrends Inc. Version: 0304 Release Date: 10/30/2007 [1] http://www.coreboot.org/ Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=30552 Cc: stable@kernel.org (2.6.34) Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: x86@kernel.org Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Fix pointer dereference before call to pcie_bus_configure_settingsShyam Iyer2011-09-091-2/+7
| | | | | | | | | | | | | | | | Commit b03e7495a862 ("PCI: Set PCI-E Max Payload Size on fabric") introduced a potential NULL pointer dereference in calls to pcie_bus_configure_settings due to attempts to access pci_bus self variables when the self pointer is NULL. To correct this, verify that the self pointer in pci_bus is non-NULL before dereferencing it. Reported-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Shyam Iyer <shyam_iyer@dell.com> Signed-off-by: Jon Mason <mason@myri.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* PCI: Set PCI-E Max Payload Size on fabricJon Mason2011-08-011-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On a given PCI-E fabric, each device, bridge, and root port can have a different PCI-E maximum payload size. There is a sizable performance boost for having the largest possible maximum payload size on each PCI-E device. However, if improperly configured, fatal bus errors can occur. Thus, it is important to ensure that PCI-E payloads sends by a device are never larger than the MPS setting of all devices on the way to the destination. This can be achieved two ways: - A conservative approach is to use the smallest common denominator of the entire tree below a root complex for every device on that fabric. This means for example that having a 128 bytes MPS USB controller on one leg of a switch will dramatically reduce performances of a video card or 10GE adapter on another leg of that same switch. It also means that any hierarchy supporting hotplug slots (including expresscard or thunderbolt I suppose, dbl check that) will have to be entirely clamped to 128 bytes since we cannot predict what will be plugged into those slots, and we cannot change the MPS on a "live" system. - A more optimal way is possible, if it falls within a couple of constraints: * The top-level host bridge will never generate packets larger than the smallest TLP (or if it can be controlled independently from its MPS at least) * The device will never generate packets larger than MPS (which can be configured via MRRS) * No support of direct PCI-E <-> PCI-E transfers between devices without some additional code to specifically deal with that case Then we can use an approach that basically ignores downstream requests and focuses exclusively on upstream requests. In that case, all we need to care about is that a device MPS is no larger than its parent MPS, which allows us to keep all switches/bridges to the max MPS supported by their parent and eventually the PHB. In this case, your USB controller would no longer "starve" your 10GE Ethernet and your hotplug slots won't affect your global MPS. Additionally, the hotplugged devices themselves can be configured to a larger MPS up to the value configured in the hotplug bridge. To choose between the two available options, two PCI kernel boot args have been added to the PCI calls. "pcie_bus_safe" will provide the former behavior, while "pcie_bus_perf" will perform the latter behavior. By default, the latter behavior is used. NOTE: due to the location of the enablement, each arch will need to add calls to this function. This patch only enables x86. This patch includes a number of changes recommended by Benjamin Herrenschmidt. Tested-by: Jordan_Hargrave@dell.com Signed-off-by: Jon Mason <mason@myri.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* x86/PCI: reduce severity of host bridge window conflict warningsBjorn Helgaas2011-07-221-4/+3
| | | | | | | | | | | | | | | Host bridge windows are top-level resources, so if we find a host bridge window conflict, it's probably with a hard-coded legacy reservation. Moving host bridge windows is theoretically possible, but we don't support it; we just ignore windows with conflicts, and it's not worth making this a user-visible error. Reported-and-tested-by: Jools Wills <jools@oxfordinspire.co.uk> References: https://bugzilla.kernel.org/show_bug.cgi?id=38522 Reported-by: Das <dasfox@gmail.com> References: https://bugzilla.kernel.org/show_bug.cgi?id=16497 Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* x86/PCI/ACPI: fix type mismatchMárton Németh2011-06-011-1/+1
| | | | | | | | | | | | | | The flags field of struct resource from linux/ioport.h is "unsigned long". Change the "type" parameter of coalesce_windows() function to match that field. This fixes the following warning messages when compiling with "make C=1 W=1 bzImage modules": arch/x86/pci/acpi.c: In function ‘coalesce_windows’: arch/x86/pci/acpi.c:198: warning: conversion to ‘long unsigned int’ from ‘int’ may change the sign of the result arch/x86/pci/acpi.c:203: warning: conversion to ‘long unsigned int’ from ‘int’ may change the sign of the result Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* x86/PCI: coalesce overlapping host bridge windowsBjorn Helgaas2010-11-111-20/+83
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some BIOSes provide PCI host bridge windows that overlap, e.g., pci_root PNP0A03:00: host bridge window [mem 0xb0000000-0xffffffff] pci_root PNP0A03:00: host bridge window [mem 0xafffffff-0xdfffffff] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xffffffff] If we simply insert these as children of iomem_resource, the second window fails because it conflicts with the first, and the third is inserted as a child of the first, i.e., b0000000-ffffffff PCI Bus 0000:00 f0000000-ffffffff PCI Bus 0000:00 When we claim PCI device resources, this can cause collisions like this if we put them in the first window: pci 0000:00:01.0: address space collision: [mem 0xff300000-0xff4fffff] conflicts with PCI Bus 0000:00 [mem 0xf0000000-0xffffffff] Host bridge windows are top-level resources by definition, so it doesn't make sense to make the third window a child of the first. This patch coalesces any host bridge windows that overlap. For the example above, the result is this single window: pci_root PNP0A03:00: host bridge window [mem 0xafffffff-0xffffffff] This fixes a 2.6.34 regression. Reference: https://bugzilla.kernel.org/show_bug.cgi?id=17011 Reported-and-tested-by: Anisse Astier <anisse@astier.eu> Reported-and-tested-by: Pramod Dematagoda <pmd.lotr.gandalf@gmail.com> Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* x86/PCI: use host bridge _CRS info on ASRock ALiveSATA2-GLANBjorn Helgaas2010-07-301-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This DMI quirk turns on "pci=use_crs" for the ALiveSATA2-GLAN because amd_bus.c doesn't handle this system correctly. The system has a single HyperTransport I/O chain, but has two PCI host bridges to buses 00 and 80. amd_bus.c learns the MMIO range associated with buses 00-ff and that this range is routed to the HT chain hosted at node 0, link 0: bus: [00, ff] on node 0 link 0 bus: 00 index 1 [mem 0x80000000-0xfcffffffff] This includes the address space for both bus 00 and bus 80, and amd_bus.c assumes it's all routed to bus 00. We find device 80:01.0, which BIOS left in the middle of that space, but we don't find a bridge from bus 00 to bus 80, so we conclude that 80:01.0 is unreachable from bus 00, and we move it from the original, working, address to something outside the bus 00 aperture, which does not work: pci 0000:80:01.0: reg 10: [mem 0xfebfc000-0xfebfffff 64bit] pci 0000:80:01.0: BAR 0: assigned [mem 0xfd00000000-0xfd00003fff 64bit] The BIOS told us everything we need to know to handle this correctly, so we're better off if we just pay attention, which lets us leave the 80:01.0 device at the original, working, address: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7f]) pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xff37ffff] ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-ff]) pci_root PNP0A08:00: host bridge window [mem 0xfebfc000-0xfebfffff] This was a regression between 2.6.33 and 2.6.34. In 2.6.33, amd_bus.c was used only when we found multiple HT chains. 3e3da00c01d050, which enabled amd_bus.c even on systems with a single HT chain, caused this failure. This quirk was written by Graham. If we ever enable "pci=use_crs" for machines from 2006 or earlir, this quirk should be removed. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=16007 Cc: stable@kernel.org Reported-by: Graham Ramsey <ramsey.graham@ntlworld.com> Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds2010-05-301-2/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, cpufeature: Unbreak compile with gcc 3.x x86, pat: Fix memory leak in free_memtype x86, k8: Fix section mismatch for powernowk8_exit() lib/atomic64_test: fix missing include of linux/kernel.h x86: remove last traces of quicklist usage x86, setup: Phoenix BIOS fixup is needed on Dell Inspiron Mini 1012 x86: "nosmp" command line option should force the system into UP mode arch/x86/pci: use kasprintf x86, apic: ack all pending irqs when crashed/on kexec
| * arch/x86/pci: use kasprintfJulia Lawall2010-05-241-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | kasprintf combines kmalloc and sprintf, and takes care of the size calculation itself. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression a,flag; expression list args; statement S; @@ a = - \(kmalloc\|kzalloc\)(...,flag) + kasprintf(flag,args) <... when != a if (a == NULL || ...) S ...> - sprintf(a,args); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> LKML-Reference: <201005241913.o4OJDG3R010871@imap1.linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
* | Merge branch 'bjorn-pci-root-v4-2.6.35' into releaseLen Brown2010-05-281-1/+4
|\ \ | |/ |/|
| * ACPI: pci_root: pass acpi_pci_root to arch-specific scanBjorn Helgaas2010-04-041-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The acpi_pci_root structure contains all the individual items (acpi_device, domain, bus number) we pass to pci_acpi_scan_root(), so just pass the single acpi_pci_root pointer directly. This will make it easier to add _CBA support later. For _CBA, we need the entire downstream bus range, not just the base bus number. We have that in the acpi_pci_root structure, so passing the pointer makes it available to the arch-specific code. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Len Brown <len.brown@intel.com>
* | x86/PCI: compute Address Space length rather than using _LENBjorn Helgaas2010-04-281-38/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ACPI _CRS Address Space Descriptors have _MIN, _MAX, and _LEN. Linux has been computing Address Spaces as [_MIN to _MIN + _LEN - 1]. Based on the tests in the bug reports below, Windows apparently uses [_MIN to _MAX]. Per spec (ACPI 4.0, Table 6-40), for _CRS fixed-size, fixed location descriptors, "_LEN must be (_MAX - _MIN + 1)", and when that's true, it doesn't matter which way we compute the end. But of course, there are BIOSes that don't follow this rule, and we're better off if Linux handles those exceptions the same way as Windows. This patch makes Linux use [_MIN to _MAX], as Windows seems to do. This effectively reverts d558b483d5 and 03db42adfe and replaces them with simpler code. https://bugzilla.kernel.org/show_bug.cgi?id=14337 (round) https://bugzilla.kernel.org/show_bug.cgi?id=15480 (truncate) Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | x86/PCI: parse additional host bridge window resource typesBjorn Helgaas2010-04-221-6/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for Memory24, Memory32, and Memory32Fixed descriptors in PCI host bridge _CRS. I experimentally determined that Windows (2008 R2) accepts these descriptors and treats them as windows that are forwarded to the PCI bus, e.g., if it finds any PCI devices with BARs outside the windows, it moves them into the windows. I don't know whether any machines actually use these descriptors in PCI host bridge _CRS methods, but if any exist and they're new enough that we automatically turn on "pci=use_crs", they will work with Windows but not with Linux. Here are the details: https://bugzilla.kernel.org/show_bug.cgi?id=15817 Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | x86/PCI: ignore Consumer/Producer bit in ACPI window descriptionsBjorn Helgaas2010-04-081-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ACPI Address Space Descriptors (used in _CRS) have a Consumer/Producer bit that is supposed to distinguish regions that are consumed directly by a device from those that are forwarded ("produced") by a bridge. But BIOSes have apparently not used this consistently, and Windows seems to ignore it, so I think Linux should ignore it as well. I can't point to any of these supposed broken BIOSes, but since we now rely on _CRS by default, I think it's safer to ignore this bit from the start. Here are details of my experiments with how Windows handles it: https://bugzilla.kernel.org/show_bug.cgi?id=15701 Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-301-0/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* x86/PCI: truncate _CRS windows with _LEN > _MAX - _MIN + 1Bjorn Helgaas2010-03-251-1/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | Yanko's GA-MA78GM-S2H (BIOS F11) reports the following resource in a PCI host bridge _CRS: [07] 32-Bit DWORD Address Space Resource Min Relocatability : MinFixed Max Relocatability : MaxFixed Address Minimum : CFF00000 (_MIN) Address Maximum : FEBFFFFF (_MAX) Address Length : 3EE10000 (_LEN) This is invalid per spec (ACPI 4.0, 6.4.3.5) because it's a fixed size, fixed location descriptor, but _LEN != _MAX - _MIN + 1. Based on https://bugzilla.kernel.org/show_bug.cgi?id=15480#c15, I think Windows handles this by truncating the window so it fits between _MIN and _MAX. I also verified this by modifying the SeaBIOS DSDT and booting Windows 2008 R2 with qemu. This patch makes Linux truncate the window, too, which fixes: http://bugzilla.kernel.org/show_bug.cgi?id=15480 Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Tested-by: Yanko Kaneti <yaneti@declera.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* x86/PCI: for host bridge address space collisions, show conflicting resourceBjorn Helgaas2010-03-251-3/+6
| | | | | | | | With insert_resource_conflict(), we can learn what the actual conflict is, so print that info for debugging purposes. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* Merge branch 'x86-mrst-for-linus' of ↵Linus Torvalds2010-03-071-5/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-mrst-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (30 commits) x86, mrst: Fix whitespace breakage in apb_timer.c x86, mrst: Fix APB timer per cpu clockevent x86, mrst: Remove X86_MRST dependency on PCI_IOAPIC x86, olpc: Use pci subarch init for OLPC x86, pci: Add arch_init to x86_init abstraction x86, mrst: Add Kconfig dependencies for Moorestown x86, pci: Exclude Moorestown PCI code if CONFIG_X86_MRST=n x86, numaq: Make CONFIG_X86_NUMAQ depend on CONFIG_PCI x86, pci: Add sanity check for PCI fixed bar probing x86, legacy_irq: Remove duplicate vector assigment x86, legacy_irq: Remove left over nr_legacy_irqs x86, mrst: Platform clock setup code x86, apbt: Moorestown APB system timer driver x86, mrst: Add vrtc platform data setup code x86, mrst: Add platform timer info parsing code x86, mrst: Fill in PCI functions in x86_init layer x86, mrst: Add dummy legacy pic to platform setup x86/PCI: Moorestown PCI support x86, ioapic: Add dummy ioapic functions x86, ioapic: Early enable ioapic for timer irq ... Fixed up semantic conflict of new clocksources due to commit 17622339af25 ("clocksource: add argument to resume callback").
| * x86: Add pci_init_irq to x86_initThomas Gleixner2010-02-191-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Moorestown wants to reuse pcibios_init_irq but needs to provide its own implementation of pci_enable_irq. After we distangled the init we can move the init_irq call to x86_init and remove the pci_enable_irq != NULL check in pcibios_init_irq. pci_enable_irq is compile time initialized to pirq_enable_irq and the special cases which override it (visws and acpi) set the x86_init function pointer to noop. That allows MSRT to override pci_enable_irq and otherwise run pcibios_init_irq unmodified. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <43F901BD926A4E43B106BF17856F07559FB80CFF@orsmsx508.amr.corp.intel.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
| * x86: Move pci init function to x86_initThomas Gleixner2010-02-191-5/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The PCI initialization in pci_subsys_init() is a mess. pci_numaq_init, pci_acpi_init, pci_visws_init and pci_legacy_init are called and each implementation checks and eventually modifies the global variable pcibios_scanned. x86_init functions allow us to do this more elegant. The pci.init function pointer is preset to pci_legacy_init. numaq, acpi and visws can modify the pointer in their early setup functions. The functions return 0 when they did the full initialization including bus scan. A non zero return value indicates that pci_legacy_init needs to be called either because the selected function failed or wants the generic bus scan in pci_legacy_init to happen (e.g. visws). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <43F901BD926A4E43B106BF17856F07559FB80CFE@orsmsx508.amr.corp.intel.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
* | x86/PCI: use host bridge _CRS info by default on 2008 and newer machinesBjorn Helgaas2010-02-231-6/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The main benefit of using ACPI host bridge window information is that we can do better resource allocation in systems with multiple host bridges, e.g., http://bugzilla.kernel.org/show_bug.cgi?id=14183 Sometimes we need _CRS information even if we only have one host bridge, e.g., https://bugs.launchpad.net/ubuntu/+source/linux/+bug/341681 Most of these systems are relatively new, so this patch turns on "pci=use_crs" only on machines with a BIOS date of 2008 or newer. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | PCI: augment bus resource table with a listBjorn Helgaas2010-02-231-29/+4
|/ | | | | | | | | | | | | | | | | | | | | | | | Previously we used a table of size PCI_BUS_NUM_RESOURCES (16) for resources forwarded to a bus by its upstream bridge. We've increased this size several times when the table overflowed. But there's no good limit on the number of resources because host bridges and subtractive decode bridges can forward any number of ranges to their secondary buses. This patch reduces the table to only PCI_BRIDGE_RESOURCE_NUM (4) entries, which corresponds to the number of windows a PCI-to-PCI (3) or CardBus (4) bridge can positively decode. Any additional resources, e.g., PCI host bridge windows or subtractively-decoded regions, are kept in a list. I'd prefer a single list rather than this split table/list approach, but that requires simultaneous changes to every architecture. This approach only requires immediate changes where we set up (a) host bridges with more than four windows and (b) subtractive-decode P2P bridges, and we can incrementally change other architectures to use the list. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* x86/PCI: remove 64-bit divisionBjorn Helgaas2009-11-061-3/+3
| | | | | | | | | | The roundup() caused a build error (undefined reference to `__udivdi3'). We're aligning to power-of-two boundaries, so it's simpler to just use ALIGN() anyway, which avoids the division. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* x86/PCI: fix bogus host bridge window start/end alignment from _CRSBjorn Helgaas2009-11-041-0/+25
| | | | | | | | | | | | | | | | | | | | | | | PCI device BARs are guaranteed to start and end on at least a four-byte (I/O) or a sixteen-byte (MMIO) boundary because they're aligned on their size and the low BAR bits are reserved. PCI-to-PCI bridge apertures have even larger alignment restrictions. However, some BIOSes (e.g., HP DL360 BIOS P31) report host bridge windows like "[io 0x0000-0x2cfe]". This is wrong because it excludes the last port at 0x2cff: it's impossible for a downstream device to claim 0x2cfe without also claiming 0x2cff. In fact, this BIOS configures a device behind the bridge to "[io 0x2c00-0x2cff]", so we know the window actually does include 0x2cff. This patch rounds the start and end of apertures to the appropriate boundary. I experimentally determined that Windows contains a similar workaround; details here: http://bugzilla.kernel.org/show_bug.cgi?id=14337 Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* x86/PCI: for debuggability, show host bridge windows even when ignoring _CRSBjorn Helgaas2009-11-041-8/+18
| | | | | | | | | | We have occasional problems with PCI resource allocation, and sometimes they could be avoided by paying attention to what ACPI tells us about the host bridges. This patch doesn't change the behavior, but it prints window information that should make debugging easier. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
OpenPOWER on IntegriCloud