summaryrefslogtreecommitdiffstats
path: root/arch/x86/kvm/i8254.c
Commit message (Collapse)AuthorAgeFilesLines
* KVM: fix typo in copyright noticeNicolas Kaiser2010-10-241-1/+1
| | | | | | | Fix typo in copyright notice. Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
* KVM: pit: Do not check pending pit timer in vcpu threadJason Wang2010-10-241-9/+0
| | | | | | | | | Pit interrupt injection was done by workqueue, so no need to check pending pit timer in vcpu thread which could lead unnecessary unblocking of vcpu. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: PIT: free irq source id in handling error pathXiao Guangrong2010-08-171-0/+1
| | | | | | | Free irq source id if create pit workqueue fail Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: destroy workqueue on kvm_create_pit() failuresXiaotian Feng2010-08-151-1/+1
| | | | | | | | | | | | | | | | kernel needs to destroy workqueue if kvm_create_pit() fails, otherwise after pit is freed, the workqueue is leaked. Signed-off-by: Xiaotian Feng <dfeng@redhat.com> Cc: Avi Kivity <avi@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Gregory Haskins <ghaskins@novell.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: PIT: stop vpit before freeing irq_routingXiao Guangrong2010-08-021-0/+3
| | | | | | | | | | | | | | | | | | | Fix: general protection fault: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC ...... Call Trace: [<ffffffffa0159bd1>] ? kvm_set_irq+0xdd/0x24b [kvm] [<ffffffff8106ea8b>] ? trace_hardirqs_off_caller+0x1f/0x10e [<ffffffff813ad17f>] ? sub_preempt_count+0xe/0xb6 [<ffffffff8106d273>] ? put_lock_stats+0xe/0x27 ... RIP [<ffffffffa0159c72>] kvm_set_irq+0x17e/0x24b [kvm] This bug is triggered when guest is shutdown, is because we freed irq_routing before pit thread stopped Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
* KVM: fix lock imbalance in kvm_create_pit()Jiri Slaby2010-08-021-0/+1
| | | | | | | | | | | | | | | | | | Stanse found that there is an omitted unlock in kvm_create_pit in one fail path. Add proper unlock there. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Avi Kivity <avi@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Cc: Gleb Natapov <gleb@redhat.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Gregory Haskins <ghaskins@novell.com> Cc: kvm@vger.kernel.org Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: x86: Introduce a workqueue to deliver PIT timer interruptsChris Lalancette2010-08-011-56/+85
| | | | | | | | | | We really want to "kvm_set_irq" during the hrtimer callback, but that is risky because that is during interrupt context. Instead, offload the work to a workqueue, which is a bit safer and should provide most of the same functionality. Signed-off-by: Chris Lalancette <clalance@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
* KVM: Update Red Hat copyrightsAvi Kivity2010-08-011-0/+1
| | | | Signed-off-by: Avi Kivity <avi@redhat.com>
* include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* KVM: Convert i8254/i8259 locks to raw_spinlocksThomas Gleixner2010-03-011-5/+5
| | | | | | | | The i8254/i8259 locks need to be real spinlocks on preempt-rt. Convert them to raw_spinlock. No change for !RT kernels. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: PIT: unregister kvm irq notifier if fail to create pitWei Yongjun2010-03-011-2/+3
| | | | | | | | | If fail to create pit, we should unregister kvm irq notifier which register in kvm_create_pit(). Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: convert slots_lock to a mutexMarcelo Tosatti2010-03-011-1/+1
| | | | Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
* KVM: convert io_bus to SRCUMarcelo Tosatti2010-03-011-3/+3
| | | | Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
* KVM: PIT: control word is write-onlyMarcelo Tosatti2010-02-091-0/+3
| | | | | | | PIT control word (address 0x43) is write-only, reads are undefined. Cc: stable@kernel.org Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
* x86: i8254.c: Add pr_fmt(fmt)Joe Perches2009-12-101-5/+7
| | | | | | | | | - Add pr_fmt(fmt) "pit: " fmt - Strip pit: prefixes from pr_debug Signed-off-by: Joe Perches <joe@perches.com> LKML-Reference: <bbd4de532f18bb7c11f64ba20d224c08291cb126.1260383912.git.joe@perches.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* KVM: Drop kvm->irq_lock lock from irq injection pathGleb Natapov2009-12-031-2/+0
| | | | | | | | | | The only thing it protects now is interrupt injection into lapic and this can work lockless. Even now with kvm->irq_lock in place access to lapic is not entirely serialized since vcpu access doesn't take kvm->irq_lock. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: use proper hrtimer function to retrieve expiration timeMarcelo Tosatti2009-10-161-1/+1
| | | | | | | | | | | hrtimer->base can be temporarily NULL due to racing hrtimer_start. See switch_hrtimer_base/lock_hrtimer_base. Use hrtimer_get_remaining which is robust against it. CC: stable@kernel.org Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: remove superfluous NULL pointer check in kvm_inject_pit_timer_irqs()Bartlomiej Zolnierkiewicz2009-09-101-1/+1
| | | | | | | | | | | | | | | This takes care of the following entries from Dan's list: arch/x86/kvm/i8254.c +714 kvm_inject_pit_timer_irqs(6) warning: variable derefenced in initializer 'vcpu' arch/x86/kvm/i8254.c +714 kvm_inject_pit_timer_irqs(6) warning: variable derefenced before check 'vcpu' Reported-by: Dan Carpenter <error27@gmail.com> Cc: corbet@lwn.net Cc: eteo@redhat.com Cc: Julia Lawall <julia@diku.dk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: PIT: Unregister ack notifier callback when freeingGleb Natapov2009-09-101-0/+2
| | | | | Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
* KVM: make io_bus interface more robustGregory Haskins2009-09-101-2/+18
| | | | | | | | | | | | | | | | Today kvm_io_bus_regsiter_dev() returns void and will internally BUG_ON if it fails. We want to create dynamic MMIO/PIO entries driven from userspace later in the series, so we need to enhance the code to be more robust with the following changes: 1) Add a return value to the registration function 2) Fix up all the callsites to check the return code, handle any failures, and percolate the error up to the caller. 3) Add an unregister function that collapses holes in the array Signed-off-by: Gregory Haskins <ghaskins@novell.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: PIT support for HPET legacy modeBeth Kon2009-09-101-4/+18
| | | | | | | | | | | | | | | | | | | | | | | When kvm is in hpet_legacy_mode, the hpet is providing the timer interrupt and the pit should not be. So in legacy mode, the pit timer is destroyed, but the *state* of the pit is maintained. So if kvm or the guest tries to modify the state of the pit, this modification is accepted, *except* that the timer isn't actually started. When we exit hpet_legacy_mode, the current state of the pit (which is up to date since we've been accepting modifications) is used to restart the pit timer. The saved_mode code in kvm_pit_load_count temporarily changes mode to 0xff in order to destroy the timer, but then restores the actual value, again maintaining "current" state of the pit for possible later reenablement. [avi: add some reserved storage in the ioctl; make SET_PIT2 IOW] [marcelo: fix memory corruption due to reserved storage] Signed-off-by: Beth Kon <eak@us.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: remove in_range from io devicesMichael S. Tsirkin2009-09-101-23/+26
| | | | | | | | | | | | This changes bus accesses to use high-level kvm_io_bus_read/kvm_io_bus_write functions. in_range now becomes unused so it is removed from device ops in favor of read/write callbacks performing range checks internally. This allows aliasing (mostly for in-kernel virtio), as well as better error handling by making it possible to pass errors up to userspace. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: convert bus to slots_lockMichael S. Tsirkin2009-09-101-2/+3
| | | | | | | | | | Use slots_lock to protect device list on the bus. slots_lock is already taken for read everywhere, so we only need to take it for write when registering devices. This is in preparation to removing in_range and kvm->lock around it. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: x86: missing locking in PIT/IRQCHIP/SET_BSP_CPU ioctl pathsMarcelo Tosatti2009-09-101-2/+0
| | | | | | | Correct missing locking in a few places in x86's vm_ioctl handling path. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: Use macro to iterate over vcpus.Gleb Natapov2009-09-101-5/+2
| | | | | | | | [christian: remove unused variables on s390] Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: Use pointer to vcpu instead of vcpu_id in timer code.Gleb Natapov2009-09-101-1/+1
| | | | | Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: Introduce kvm_vcpu_is_bsp() function.Gleb Natapov2009-09-101-2/+2
| | | | | | | Use it instead of open code "vcpu_id zero is BSP" assumption. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: switch irq injection/acking data structures to irq_lockMarcelo Tosatti2009-09-101-2/+2
| | | | | | | | | | | | | | | | | | | Protect irq injection/acking data structures with a separate irq_lock mutex. This fixes the following deadlock: CPU A CPU B kvm_vm_ioctl_deassign_dev_irq() mutex_lock(&kvm->lock); worker_thread() -> kvm_deassign_irq() -> kvm_assigned_dev_interrupt_work_handler() -> deassign_host_irq() mutex_lock(&kvm->lock); -> cancel_work_sync() [blocked] [gleb: fix ia64 path] Reported-by: Alex Williamson <alex.williamson@hp.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: do not register i8254 PIO regions until we are initializedGregory Haskins2009-09-101-9/+8
| | | | | | | | | | | We currently publish the i8254 resources to the pio_bus before the devices are fully initialized. Since we hold the pit_lock, its probably not a real issue. But lets clean this up anyway. Reported-by: Avi Kivity <avi@redhat.com> Signed-off-by: Gregory Haskins <ghaskins@novell.com> Acked-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: cleanup io_device codeGregory Haskins2009-09-101-12/+28
| | | | | | | | | | | We modernize the io_device code so that we use container_of() instead of dev->private, and move the vtable to a separate ops structure (theoretically allows better caching for multiple instances of the same ops structure) Signed-off-by: Gregory Haskins <ghaskins@novell.com> Acked-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: Allow PIT emulation without speaker portJan Kiszka2009-09-101-6/+8
| | | | | | | | | | | | | The in-kernel speaker emulation is only a dummy and also unneeded from the performance point of view. Rather, it takes user space support to generate sound output on the host, e.g. console beeps. To allow this, introduce KVM_CREATE_PIT2 which controls in-kernel speaker port emulation via a flag passed along the new IOCTL. It also leaves room for future extensions of the PIT configuration interface. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: PIT: fix kpit_elapsed division by zeroMarcelo Tosatti2009-08-051-0/+3
| | | | | | | | | Fix division by zero triggered by latch count command on uninitialized counter. Cc: stable@kernel.org Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: PIT: fix count read and mode 0 handlingMarcelo Tosatti2009-06-101-11/+15
| | | | | | | | | | | | | | Commit 46ee278652f4cbd51013471b64c7897ba9bcd1b1 causes Solaris 10 to hang on boot. Assuming that PIT counter reads should return 0 for an expired timer is wrong: when it is active, the counter never stops (see comment on __kpit_elapsed). Also arm a one shot timer for mode 0. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: make 'lapic_timer_ops' and 'kpit_ops' staticHannes Eder2009-06-101-1/+1
| | | | | | | | | Fix this sparse warnings: arch/x86/kvm/lapic.c:916:22: warning: symbol 'lapic_timer_ops' was not declared. Should it be static? arch/x86/kvm/i8254.c:268:22: warning: symbol 'kpit_ops' was not declared. Should it be static? Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: unify part of generic timer handlingMarcelo Tosatti2009-06-101-37/+20
| | | | | | | | | Hide the internals of vcpu awakening / injection from the in-kernel emulated timers. This makes future changes in this logic easier and decreases the distance to more generic timer handling. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: PIT: remove usage of count_load_time for channel 0Marcelo Tosatti2009-06-101-6/+31
| | | | | | | We can infer elapsed time from hrtimer_expires_remaining. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: PIT: remove unused scheduled variableMarcelo Tosatti2009-06-101-1/+0
| | | | | | | Unused. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: Reset PIT irq injection logic when the PIT IRQ is unmaskedAvi Kivity2009-03-241-0/+15
| | | | | | | | | | | While the PIT is masked the guest cannot ack the irq, so the reinject logic will never allow the interrupt to be injected. Fix by resetting the reinjection counters on unmask. Unbreaks Xen. Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: Properly lock PIT creationAvi Kivity2009-03-241-2/+0
| | | | | | Otherwise, two threads can create a PIT in parallel and cause a memory leak. Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: PIT: provide an option to disable interrupt reinjectionMarcelo Tosatti2009-03-241-0/+4
| | | | | | | | | | | | | | Certain clocks (such as TSC) in older 2.6 guests overaccount for lost ticks, causing severe time drift. Interrupt reinjection magnifies the problem. Provide an option to disable it. [avi: allow room for expansion in case we want to disable reinjection of other timers] Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: PIT: fix i8254 pending count readMarcelo Tosatti2009-02-151-1/+1
| | | | | | | | count_load_time assignment is bogus: its supposed to contain what it means, not the expiration time. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: x86: Optimize NMI watchdog deliveryJan Kiszka2008-12-311-5/+6
| | | | | | | | | | As suggested by Avi, this patch introduces a counter of VCPUs that have LVT0 set to NMI mode. Only if the counter > 0, we push the PIT ticks via all LAPIC LVT0 lines to enable NMI watchdog support. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: x86: Fix and refactor NMI watchdog emulationJan Kiszka2008-12-311-6/+9
| | | | | | | | | | | | | This patch refactors the NMI watchdog delivery patch, consolidating tests and providing a proper API for delivering watchdog events. An included micro-optimization is to check only for apic_hw_enabled in kvm_apic_local_deliver (the test for LVT mask is covering the soft-disabled case already). Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: x86: Enable NMI Watchdog via in-kernel PIT sourceJan Kiszka2008-12-311-0/+15
| | | | | | | | | | | | | LINT0 of the LAPIC can be used to route PIT events as NMI watchdog ticks into the guest. This patch aligns the in-kernel irqchip emulation with the user space irqchip with already supports this feature. The trick is to route PIT interrupts to all LAPIC's LVT0 lines. Rebased and slightly polished patch originally posted by Sheng Yang. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Sheng Yang <sheng.yang@intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* KVM: Fix pit memory leak if unable to allocate irq source idAvi Kivity2008-11-111-1/+3
| | | | | Reported-By: Daniel Marjamäki <danielm77@spray.se> Signed-off-by: Avi Kivity <avi@qumranet.com>
* KVM: Fix guest shared interrupt with in-kernel irqchipSheng Yang2008-10-281-2/+9
| | | | | | | | | | | | | | | | | | | | | | Every call of kvm_set_irq() should offer an irq_source_id, which is allocated by kvm_request_irq_source_id(). Based on irq_source_id, we identify the irq source and implement logical OR for shared level interrupts. The allocated irq_source_id can be freed by kvm_free_irq_source_id(). Currently, we support at most sizeof(unsigned long) different irq sources. [Amit: - rebase to kvm.git HEAD - move definition of KVM_USERSPACE_IRQ_SOURCE_ID to common file - move kvm_request_irq_source_id to the update_irq ioctl] [Xiantao: - Add kvm/ia64 stuff and make it work for kvm/ia64 guests] Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* Merge commit 'linus/master' into merge-linusArjan van de Ven2008-10-171-43/+40
|\ | | | | | | | | | | Conflicts: arch/x86/kvm/i8254.c
| * KVM: x86: do not execute halted vcpusMarcelo Tosatti2008-10-151-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Offline or uninitialized vcpu's can be executed if requested to perform userspace work. Follow Avi's suggestion to handle halted vcpu's in the main loop, simplifying kvm_emulate_halt(). Introduce a new vcpu->requests bit to indicate events that promote state from halted to running. Also standardize vcpu wake sites. Signed-off-by: Marcelo Tosatti <mtosatti <at> redhat.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
| * KVM: make irq ack notifier functions staticHarvey Harrison2008-10-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | sparse says: arch/x86/kvm/x86.c:107:32: warning: symbol 'kvm_find_assigned_dev' was not declared. Should it be static? arch/x86/kvm/i8254.c:225:6: warning: symbol 'kvm_pit_ack_irq' was not declared. Should it be static? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Avi Kivity <avi@qumranet.com>
| * KVM: Use kvm_set_irq to inject interruptsAmit Shah2008-10-151-4/+2
| | | | | | | | | | | | | | ... instead of using the pic and ioapic variants Signed-off-by: Amit Shah <amit.shah@qumranet.com> Signed-off-by: Avi Kivity <avi@qumranet.com>
OpenPOWER on IntegriCloud