summaryrefslogtreecommitdiffstats
path: root/arch/x86/kernel/early-quirks.c
Commit message (Collapse)AuthorAgeFilesLines
* x86 early quirks: eliminate unused functionIngo Molnar2009-04-081-0/+2
| | | | | | | | | | | | | Impact: cleanup this warning: arch/x86/kernel/early-quirks.c:99: warning: ‘ati_ixp4x0_rev’ defined but not used triggers because ati_ixp4x0_rev() is only used in the ACPI && X86_IO_APIC case. Signed-off-by: Ingo Molnar <mingo@elte.hu>
* x86: only scan the root bus in early PCI quirksAndi Kleen2009-01-091-8/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | We found a situation on Linus' machine that the Nvidia timer quirk hit on a Intel chipset system. The problem is that the system has a fancy Nvidia card with an own PCI bridge, and the early-quirks code looking for any NVidia bridge triggered on it incorrectly. This didn't lead a boot failure by luck, but the timer routing code selecting the wrong timer first and some ugly messages. It might lead to real problems on other systems. I checked all the devices which are currently checked for by early_quirks and it turns out they are all located in the root bus zero. So change the early-quirks loop to only scan bus 0. This incidently also saves quite some unnecessary scanning work, because early_quirks doesn't go through all the non root busses. The graphics card is not on bus 0, so it is not matched anymore. Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* x86: move GART specific stuff from iommu.h to gart.hJoerg Roedel2008-11-281-0/+1
| | | | | | | Impact: cleanup Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* Revert "x86: blacklist DMAR on Intel G31/G33 chipsets"David Woodhouse2008-11-151-18/+0
| | | | | | | | | | | | | | | This reverts commit e51af6630848406fc97adbd71443818cdcda297b, which was wrongly hoovered up and submitted about a month after a better fix had already been merged. The better fix is commit cbda1ba898647aeb4ee770b803c922f595e97731 ("PCI/iommu: blacklist DMAR on Intel G31/G33 chipsets"), where we do this blacklisting based on the DMI identification for the offending motherboard, since sometimes this chipset (or at least a chipset with the same PCI ID) apparently _does_ actually have an IOMMU. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* x86: SB600: skip ACPI IRQ0 override if it is not routed to INT2 of IOAPICAndreas Herrmann2008-10-161-3/+52
| | | | | | | | | | | | | | | On some more HP laptops BIOS reports an IRQ0 override but the SB600 chipset is configured such that timer interrupts go to INT0 of IOAPIC. Check IRQ0 routing and if it is routed to INT0 of IOAPIC skip the timer override. http://bugzilla.kernel.org/show_bug.cgi?id=11715 http://bugzilla.kernel.org/show_bug.cgi?id=11516 Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: Len Brown <len.brown@intel.com>
* Merge branch 'linus' into x86/quirksIngo Molnar2008-10-121-0/+18
|\ | | | | | | | | Conflicts: arch/x86/kernel/early-quirks.c
| * x86: blacklist DMAR on Intel G31/G33 chipsetsDavid Woodhouse2008-09-051-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | Some BIOSes (the Intel DG33BU, for example) wrongly claim to have DMAR when they don't. Avoid the resulting crashes when it doesn't work as expected. I'd still be grateful if someone could test it on a DG33BU with the old BIOS though, since I've killed mine. I tested the DMI version, but not this one. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | x86: SB450: skip IRQ0 override if it is not routed to INT2 of IOAPICAndreas Herrmann2008-10-071-0/+48
|/ | | | | | | | | | | | | | | | | | On some HP nx6... laptops (e.g. nx6325) BIOS reports an IRQ0 override but the SB450 chipset is configured such that timer interrupts goe to INT0 of IOAPIC. Check IRQ0 routing and if it is routed to INT0 of IOAPIC skip the timer override. [ This more generic PCI ID based quirk should alleviate the need for dmi_ignore_irq0_timer_override DMI quirks. ] Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Acked-by: "Maciej W. Rozycki" <macro@linux-mips.org> Tested-by: Dmitry Torokhov <dtor@mail.ru> Cc: <stable@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
*---. Merge branches 'x86/urgent', 'x86/amd-iommu', 'x86/apic', 'x86/cleanups', ↵Ingo Molnar2008-07-211-4/+1
|\ \ \ | | | | | | | | | | | | 'x86/core', 'x86/cpu', 'x86/fixmap', 'x86/gart', 'x86/kprobes', 'x86/memtest', 'x86/modules', 'x86/nmi', 'x86/pat', 'x86/reboot', 'x86/setup', 'x86/step', 'x86/unify-pci', 'x86/uv', 'x86/xen' and 'xen-64bit' into x86/for-linus
| | * | x86: make only GART code include gart.hFUJITA Tomonori2008-07-111-4/+1
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | gart.h has only GART-specific stuff. Only GART code needs it. Other IOMMU stuff should include iommu.h instead of gart.h. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Muli Ben-Yehuda <muli@il.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | | Merge branch 'linux-next' of ↵Linus Torvalds2008-07-161-5/+21
|\ \ \ | |/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (72 commits) Revert "x86/PCI: ACPI based PCI gap calculation" PCI: remove unnecessary volatile in PCIe hotplug struct controller x86/PCI: ACPI based PCI gap calculation PCI: include linux/pm_wakeup.h for device_set_wakeup_capable PCI PM: Fix pci_prepare_to_sleep x86/PCI: Fix PCI config space for domains > 0 Fix acpi_pm_device_sleep_wake() by providing a stub for CONFIG_PM_SLEEP=n PCI: Simplify PCI device PM code PCI PM: Introduce pci_prepare_to_sleep and pci_back_from_sleep PCI ACPI: Rework PCI handling of wake-up ACPI: Introduce new device wakeup flag 'prepared' ACPI: Introduce acpi_device_sleep_wake function PCI: rework pci_set_power_state function to call platform first PCI: Introduce platform_pci_power_manageable function ACPI: Introduce acpi_bus_power_manageable function PCI: make pci_name use dev_name PCI: handle pci_name() being const PCI: add stub for pci_set_consistent_dma_mask() PCI: remove unused arch pcibios_update_resource() functions PCI: fix pci_setup_device()'s sprinting into a const buffer ... Fixed up conflicts in various files (arch/x86/kernel/setup_64.c, arch/x86/pci/irq.c, arch/x86/pci/pci.h, drivers/acpi/sleep/main.c, drivers/pci/pci.c, drivers/pci/pci.h, include/acpi/acpi_bus.h) from x86 and ACPI updates manually.
| * | x86/PCI: fixup early quirk probingJesse Barnes2008-06-161-5/+21
| |/ | | | | | | | | | | | | | | | | | | | | | | On x86, we do early PCI probing to apply some quirks for chipset bugs. However, in a recent cleanup (7bcbc78dea92fdf0947fa48e248da3c993a5690f) a thinko was introduced that causes us to probe all subfunctions of even single function devices (a function was factored out of an inner loop and a "break" became a "return"). Fix that up by making check_dev_quirk() return a value so we can keep the factored code intact. Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | x86: remove end_pfn in 64bitYinghai Lu2008-07-081-1/+1
| | | | | | | | | | | | | | and use max_pfn directly. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | x86: I/O APIC: remove parameters to fiddle with the 8259AMaciej W. Rozycki2008-07-081-13/+0
|/ | | | | | | | | | | Remove the "disable_8254_timer" and "enable_8254_timer" kernel parameters. Now that AEOI acknowledgements are no longer needed for correct timer operation, the 8259A can be kept disabled unconditionally unless interrupts, either timer or watchdog ones, are actually passed through it. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* x86: fix section mismatch warning in early-quirks.cSam Ravnborg2008-01-301-1/+1
| | | | | | | | | | | | | | | | | | | | Fix following warnings: WARNING: arch/x86/kernel/built-in.o(.text+0x139e1): Section mismatch: reference to .init.data:early_qrk in 'check_dev_quirk' WARNING: arch/x86/kernel/built-in.o(.text+0x139f5): Section mismatch: reference to .init.data:early_qrk in 'check_dev_quirk' WARNING: arch/x86/kernel/built-in.o(.text+0x13a0c): Section mismatch: reference to .init.data:early_qrk in 'check_dev_quirk' WARNING: arch/x86/kernel/built-in.o(.text+0x13a12): Section mismatch: reference to .init.data:early_qrk in 'check_dev_quirk' WARNING: arch/x86/kernel/built-in.o(.text+0x13a1a): Section mismatch: reference to .init.data:early_qrk in 'check_dev_quirk' WARNING: arch/x86/kernel/built-in.o(.text+0x13a36): Section mismatch: reference to .init.data:early_qrk in 'check_dev_quirk' WARNING: arch/x86/kernel/built-in.o(.text+0x13a42): Section mismatch: reference to .init.data: Warning was caused by access to the __initdata annotated variable from the non-annotated static function check_dev_quirk(). check_dev_quirk() were only used from a function annotated __init so add __init annotation to check_dev_quirk() to fix it. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* x86: clean up arch/x86/kernel/early-quirks.cNeil Horman2008-01-301-44/+47
| | | | | | | | | | | | clean up checkpatch errors. No code changed. text data bss dec hex filename 705 120 0 825 339 early-quirks.o.before 705 120 0 825 339 early-quirks.o.after Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* x86, kexec: force x86 arches to boot kdump kernels on boot cpuNeil Horman2008-01-301-21/+65
| | | | | | | | | | | | | | | | | | | | | | | | Recently a kdump bug was discovered in which a system would hang inside calibrate_delay during the booting of the kdump kernel. This was caused by the fact that the jiffies counter was not being incremented during timer calibration. The root cause of this problem was found to be a bios misconfiguration of the hypertransport bus. On system affected by this hang, the bios had assigned APIC ids which used extended apic bits (more than the nominal 4 bit ids's), but failed to configure bit 17 of the hypertransport transaction config register, which indicated that the mask for the destination field of interrupt packets accross the ht bus (see section 3.3.9 of http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/26094.PDF). If a crash occurs on a cpu with an APIC id that extends beyond 4 bits, it will not recieve interrupts during the kdump kernel boot, and this hang will be the result. The fix is to add this patch, whcih add an early pci quirk check, to forcibly enable this bit in the httcfg register. This enables all cpus on a system to receive interrupts, and allows kdump kernel bootup to procede normally. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* x86 gart: rename symbols only used for the GART implementationJoerg Roedel2007-10-301-2/+2
| | | | | | | | | | | | This patch renames the 4 symbols iommu_hole_init(), iommu_aperture, iommu_aperture_allowed, iommu_aperture_disabled. All these symbols are only used for the GART implementation of IOMMUs. It adds and additional gart_ prefix to them. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* x86 gart: rename CONFIG_IOMMU to CONFIG_GART_IOMMUJoerg Roedel2007-10-301-2/+2
| | | | | | | | | | This patch renames the IOMMU config option to GART_IOMMU because in fact it means the GART and not general support for an IOMMU on x86. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Acked-by: Muli Ben-Yehuda <muli@il.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* x86 gart: rename iommu.h to gart.hJoerg Roedel2007-10-301-1/+1
| | | | | | | | | | | This patch renames the include file asm-x86/iommu.h to asm-x86/gart.h to make clear to which IOMMU implementation it belongs. The patch also adds "GART" to the Kconfig line. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Acked-by: Muli Ben-Yehuda <muli@il.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* x86: fix compiler warnings in arch/x86/kernel/early-quirks.cJeff Garzik2007-10-271-1/+3
| | | | | | | | | | fix this warning: arch/x86/kernel/early-quirks.c:40: warning: nvidia_hpet_check defined but not used Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* x86: Unify i386 and x86-64 early quirksAndi Kleen2007-10-191-0/+136
They were already very similar; just use the same file now. [ tglx: arch/x86 adaptation ] Cc: lenb@kernel.org Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
OpenPOWER on IntegriCloud