summaryrefslogtreecommitdiffstats
path: root/arch/x86/kernel/apic/probe_64.c
Commit message (Collapse)AuthorAgeFilesLines
* x86/platform: Introduce APIC post-initialization callbackIdo Yariv2012-06-061-9/+2
| | | | | | | | | | | | Some subarchitectures (such as vSMP) need to slightly adjust the underlying APIC structure. Add an APIC post-initialization callback to 'struct x86_platform_ops' for this purpose and use it for adjusting the APIC structure on vSMP systems. Signed-off-by: Ido Yariv <ido@wizery.com> Acked-by: Shai Fultheim <shai@scalemp.com> Link: http://lkml.kernel.org/r/1338675095-27260-1-git-send-email-ido@wizery.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
* x86, apic: Make apic drivers staticSuresh Siddha2011-05-221-21/+0
| | | | | | | | | | | | | | Apic probe now looks at the apic drivers listed in the .apicdrivers section. Remove apic_probe[] and make each apic driver static. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Tested-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: steiner@sgi.com Cc: gorcunov@openvz.org Cc: yinghai@kernel.org Link: http://lkml.kernel.org/r/20110521005526.341718626@sbsiddha-MOBL3.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
* x86, apic: Use .apicdrivers section for the apic drivers listSuresh Siddha2011-05-221-12/+16
| | | | | | | | | | | | | | This will eliminate the need for apic_probe[], as the probing now will happen based on the apic drivers order in the .apcidrivers section. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Tested-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: steiner@sgi.com Cc: gorcunov@openvz.org Cc: yinghai@kernel.org Link: http://lkml.kernel.org/r/20110521005526.164277071@sbsiddha-MOBL3.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
* x86, apic: Use probe routines to simplify apic selectionSuresh Siddha2011-05-201-15/+7
| | | | | | | | | | | | | | | Use the unused probe routine in the apic driver to finalize the apic model selection. This cleans up the default_setup_apic_routing() and this probe routine in future can also be used for doing any apic model specific initialisation. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Acked-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: steiner@sgi.com Cc: yinghai@kernel.org Link: http://lkml.kernel.org/r/20110519234637.247458931@sbsiddha-MOBL3.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
* x86: Enable the intr-remap fault handling after local APIC setupKenji Kaneshige2010-12-131-7/+0
| | | | | | | | | | | | | | | | | | | | | | Interrupt-remapping gets enabled very early in the boot, as it determines the apic mode that the processor can use. And the current code enables the vt-d fault handling before the setup_local_APIC(). And hence the APIC LDR registers and data structure in the memory may not be initialized. So the vt-d fault handling in logical xapic/x2apic modes were broken. Fix this by enabling the vt-d fault handling in the end_local_APIC_setup() A cleaner fix of enabling fault handling while enabling intr-remapping will be addressed for v2.6.38. [ Enabling intr-remapping determines the usage of x2apic mode and the apic mode determines the fault-handling configuration. ] Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> LKML-Reference: <20101201062244.541996375@intel.com> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: stable@kernel.org [v2.6.32+] Acked-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
* x86, x2apic: Simplify apic init in SMP and UP buildsSuresh Siddha2010-09-151-0/+3
| | | | | | | | | | | | Move enable_IR_x2apic() inside the default_setup_apic_routing(), and for SMP platforms, move the default_setup_apic_routing() after smp_sanity_check(). This cleans up the code that tries to avoid multiple calls to default_setup_apic_routing() when smp_sanity_check() fails (which goes through the APIC_init_uniprocessor() path). Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> LKML-Reference: <20100827181049.173087246@sbsiddha-MOBL3.sc.intel.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
* x86, apic: Don't use logical-flat mode when CPU hotplug may exceed 8 CPUsSuresh Siddha2010-02-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | We need to fall back from logical-flat APIC mode to physical-flat mode when we have more than 8 CPUs. However, in the presence of CPU hotplug(with bios listing not enabled but possible cpus as disabled cpus in MADT), we have to consider the number of possible CPUs rather than the number of current CPUs; otherwise we may cross the 8-CPU boundary when CPUs are added later. 32bit apic code can use more cleanups (like the removal of vendor checks in 32bit default_setup_apic_routing()) and more unifications with 64bit code. Yinghai has some patches in works already. This patch addresses the boot issue that is reported in the virtualization guest context. [ hpa: incorporated function annotation feedback from Yinghai Lu ] Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> LKML-Reference: <1265767304.2833.19.camel@sbs-t61.sc.intel.com> Acked-by: Shaohui Zheng <shaohui.zheng@intel.com> Reviewed-by: Yinghai Lu <yinghai@kernel.org> Cc: <stable@kernel.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
* x86, apic: use logical flat for systems with <= 8 logical cpusSuresh Siddha2010-01-181-5/+3
| | | | | | | | | | | | | | | | We can use logical flat mode if there are <= 8 logical cpu's (irrespective of physical apic id values). This will enable simplified and efficient IPI and device interrupt routing on such platforms. This has been tested to work on both Intel and AMD platforms. Exceptions like IBM summit platform which can't use logical flat mode are addressed by using OEM platform checks. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Chris McDermott <lcm@linux.vnet.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Revert "x86, apic: Use logical flat on intel with <= 8 logical cpus"Ananth N Mavinakayanahalli2010-01-111-11/+4
| | | | | | | | | | | | | | | | | | Revert commit 2fbd07a5f5d1295fa9b0c0564ec27da7c276a75a, as this commit breaks an IBM platform with quad-core Xeon cpu's. According to Suresh, this might be an IBM platform issue, as on other Intel platforms with <= 8 logical cpu's, logical flat mode works fine irespective of physical apic id values (inline with the xapic architecture). Revert this for now because of the IBM platform breakage. Another version will be re-submitted after the complete analysis. Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Acked-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* x86, apic: Use logical flat on intel with <= 8 logical cpusSuresh Siddha2009-09-191-4/+11
| | | | | | | | | | | | | | | | | On Intel platforms, we can use logical flat mode if there are <= 8 logical cpu's (irrespective of physical apic id values). This will enable simplified and efficient IPI and device interrupt routing on such platforms. Fix the relevant comments while we are at it. We can clean up default_setup_apic_routing() by using apic->probe() but that is a different item. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: "yinghai@kernel.org" <yinghai@kernel.org> LKML-Reference: <1253327399.3948.747.camel@sbs-t61.sc.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* Merge branch 'x86-apic-for-linus' of ↵Linus Torvalds2009-09-141-3/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (24 commits) ACPI, x86: expose some IO-APIC routines when CONFIG_ACPI=n x86, apic: Slim down stack usage in early_init_lapic_mapping() x86, ioapic: Get rid of needless check and simplify ioapic_setup_resources() x86, ioapic: Define IO_APIC_DEFAULT_PHYS_BASE constant x86: Fix x86_model test in es7000_apic_is_cluster() x86, apic: Move dmar_table_init() out of enable_IR() x86, ioapic: Panic on irq-pin binding only if needed x86/apic: Enable x2APIC without interrupt remapping under KVM x86, apic: Drop redundant bit assignment x86, ioapic: Throw BUG instead of NULL dereference x86, ioapic: Introduce for_each_irq_pin() helper x86: Remove superfluous NULL pointer check in destroy_irq() x86/ioapic.c: unify ioapic_retrigger_irq() x86/ioapic.c: convert __target_IO_APIC_irq to conventional for() loop x86/ioapic.c: clean up replace_pin_at_irq_node logic and comments x86/ioapic.c: convert replace_pin_at_irq_node to conventional for() loop x86/ioapic.c: simplify add_pin_to_irq_node() x86/ioapic.c: convert io_apic_level_ack_pending loop to normal for() loop x86/ioapic.c: move lost comment to what seems like appropriate place x86/ioapic.c: remove redundant declaration of irq_pin_list ...
| * x86/apic: Enable x2APIC without interrupt remapping under KVMGleb Natapov2009-08-051-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | KVM would like to provide x2APIC interface to a guest without emulating interrupt remapping device. The reason KVM prefers guest to use x2APIC is that x2APIC interface is better virtualizable and provides better performance than mmio xAPIC interface: - msr exits are faster than mmio (no page table walk, emulation) - no need to read back ICR to look at the busy bit - one 64 bit ICR write instead of two 32 bit writes - shared code with the Hyper-V paravirt interface Included patch changes x2APIC enabling logic to enable it even if IR initialization failed, but kernel runs under KVM and no apic id is greater than 255 (if there is one spec requires BIOS to move to x2apic mode before starting an OS). -v2: fix build -v3: fix bug causing compiler warning Signed-off-by: Gleb Natapov <gleb@redhat.com> Acked-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Sheng Yang <sheng@linux.intel.com> Cc: "avi@redhat.com" <avi@redhat.com> LKML-Reference: <20090720122417.GR5638@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | x86: Fix vSMP boot crashYinghai Lu2009-08-261-0/+10
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 2.6.31-rc7 does not boot on vSMP systems: [ 8.501108] CPU31: Thermal monitoring enabled (TM1) [ 8.501127] CPU 31 MCA banks SHD:2 SHD:3 SHD:5 SHD:6 SHD:8 [ 8.650254] CPU31: Intel(R) Xeon(R) CPU E5540 @ 2.53GHz stepping 04 [ 8.710324] Brought up 32 CPUs [ 8.713916] Total of 32 processors activated (162314.96 BogoMIPS). [ 8.721489] ERROR: parent span is not a superset of domain->span [ 8.727686] ERROR: domain->groups does not contain CPU0 [ 8.733091] ERROR: groups don't span domain->span [ 8.737975] ERROR: domain->cpu_power not set [ 8.742416] Ravikiran Thirumalai bisected it to: | commit 2759c3287de27266e06f1f4e82cbd2d65f6a044c | x86: don't call read_apic_id if !cpu_has_apic The problem is that on vSMP systems the CPUID derived initial-APICIDs are overlapping - so we need to fall back on hard_smp_processor_id() which reads the local APIC. Both come from the hardware (influenced by firmware though) so it's a tough call which one to trust. Doing the quirk expresses the vSMP property properly and also does not affect other systems, so we go for this solution instead of a revert. Reported-and-Tested-by: Ravikiran Thirumalai <kiran@scalex86.org> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Shai Fultheim <shai@scalex86.org> Cc: Suresh Siddha <suresh.b.siddha@intel.com> LKML-Reference: <4A944D3C.5030100@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* x86: x2apic, IR: Clean up X86_X2APIC and INTR_REMAP config checksSuresh Siddha2009-04-211-1/+1
| | | | | | | | | | | | | | | Add x2apic_supported() to clean up CONFIG_X86_X2APIC checks. Fix CONFIG_INTR_REMAP checks. [ Impact: cleanup ] Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: dwmw2@infradead.org Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Weidong Han <weidong.han@intel.com> LKML-Reference: <20090420200450.128993000@linux-os.sc.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* x86, x2apic: cleanup ifdef CONFIG_INTR_REMAP in io_apic codeSuresh Siddha2009-03-171-2/+0
| | | | | | | | | Impact: cleanup Clean up #ifdefs and replace them with helper functions. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
* x86, x2apic: enable fault handling for intr-remappingSuresh Siddha2009-03-171-0/+9
| | | | | | | | | | Impact: interface augmentation (not yet used) Enable fault handling flow for intr-remapping aswell. Fault handling code now shared by both dma-remapping and intr-remapping. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
* x86: remove update_apic from x86_quirksYinghai Lu2009-02-261-3/+0
| | | | | | | | | | | | | Impact: cleanup x86_quirks->update_apic() calling looks crazy. so try to remove it: 1. every apic take wakeup_cpu member directly 2. separate es7000_apic to es7000_apic_cluster 3. use uv_wakeup_cpu directly Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* x86: select x2apic ops in early apic probe only if x2apic mode is enabledSuresh Siddha2009-02-221-3/+10
| | | | | | | | | | | | | | | | | If BIOS hands over the control to OS in legacy xapic mode, select legacy xapic related ops in the early apic probe and shift to x2apic ops later in the boot sequence, only after enabling x2apic mode. If BIOS hands over the control in x2apic mode, select x2apic related ops in the early apic probe. This fixes the early boot panic, where we were selecting x2apic ops, while the cpu is still in legacy xapic mode. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* x86, apic: move remaining APIC drivers to arch/x86/kernel/apic/*Ingo Molnar2009-02-171-0/+89
Move the 32-bit extended-arch APIC drivers to arch/x86/kernel/apic/ too, and rename apic_64.c to probe_64.c. Signed-off-by: Ingo Molnar <mingo@elte.hu>
OpenPOWER on IntegriCloud