summaryrefslogtreecommitdiffstats
path: root/arch/sh/boards
Commit message (Collapse)AuthorAgeFilesLines
* sh: fix R2D-1 CF supportMagnus Damm2007-11-231-0/+2
| | | | | | | | | | | | | | This patch fixes CF support for R2D-1 boards. Both R2D-1 and R2D-PLUS are equipped with CF IRQs, but the R2D-1 FPGA version seem to deliver IRQ spikes with certain CF cards during libata probing. This patch enables polling for R2D-1 as a workaround for this broken FGPA logic. R2D-1 CF support was recently introduced by commit: 43f4b8c7578b928892b6f01d374346ae14e5eb70. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: Kill off broken snapgear ds1302 code.Paul Mundt2007-11-083-326/+2
| | | | | | | | | This will force the snapgear boards to use the on-chip SH RTC instead, until the rtc-ds1302 driver is merged. The current code is broken and hasn't built in some time, so just kill it off and get the board working again. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: Fix heartbeart on Solution Engine seriesNobuhiro Iwamatsu2007-11-073-0/+17
| | | | | | | | Access size to LED is not added on Solution Engine series. LED doesn't work. Fixed this problem. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: hs7751rvoip: Kill off dead IPR IRQ mappings.Paul Mundt2007-11-071-17/+2
| | | | | | This is dead code, and doesn't build anyways. Kill it off. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: hs7751rvoip: irq.c needs linux/interrupt.h.Paul Mundt2007-11-071-0/+1
| | | | Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: Kill off duplicate includes.Paul Mundt2007-11-072-2/+0
| | | | | | Caught by the surprisingly not-entirely-useless 'includecheck'. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: Fix up r7780rp highlander CF access size.Paul Mundt2007-11-021-0/+31
| | | | | | | | | | | | | | | R7780RP can't do byte-sized accesses to CF, so needs to do word sized access with low-byte masking. This same problem exists on older versions of the R2D, with the same workaround having been implemented in 43f4b8c7578b928892b6f01d374346ae14e5eb70 there. Follow that change for the highlander boards. This does not impact R7780MP or SH7785 based Highlander modules. If you're unfortunate enough to be stuck with an R7780RP, this patch is for you! Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: Enable USBF on MS7722SE.Yoshihiro Shimoda2007-10-301-2/+2
| | | | | Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: add support for ax88796 and 93cx6 to highlander boardsMagnus Damm2007-10-301-0/+40
| | | | | | | | | | This patch adds support for the ax88796 driver on highlander boards. Implemented using the 93cx6 EEPROM support introduced by commit-id 89e536a190f90d038bae7905a0c582cb7089b739. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* PM: Rename struct pm_ops and related thingsRafael J. Wysocki2007-10-181-3/+3
| | | | | | | | | | | | | | | | The name of 'struct pm_ops' suggests that it is related to the power management in general, but in fact it is only related to suspend.  Moreover, its name should indicate what this structure is used for, so it seems reasonable to change it to 'struct platform_suspend_ops'.  In that case, the name of the global variable of this type used by the PM core and the names of related functions should be changed accordingly. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Cc: Len Brown <lenb@kernel.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* sh: allow building for both r2d boards in same binary.Magnus Damm2007-10-101-8/+1
| | | | | | | | | This patch enables building for both R2D-PLUS and R2D-1 boards. All code is already in place except for the Kconfig limitation. This is useful if you want to run the same binary on both R2D-PLUS and R2D-1 boards. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: fix r2d board detectionMagnus Damm2007-10-101-2/+5
| | | | | | | | This patch fixes the R2D-PLUS and R2D-1 board detection code. Tested on two R2D-PLUS and two R2D-1 boards. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: cleanup struct irqaction initializers.Thomas Gleixner2007-10-031-2/+5
| | | | | | Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: Magic Panel MTD mapping update.Markus Brunner2007-09-211-3/+85
| | | | | | | | | | This update moves the flash mapping for the Magic Panel into the board setup. It also removes references to the old MTD mapping option in the defconfig. Signed-off by: Markus Brunner <super.firetwister@gmail.com> Signed-off by: Mark Jonas <toertel@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: rts7751r2d: Fix up trivial build failure.Paul Mundt2007-09-211-2/+2
| | | | Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: rts7751r2d cf_ide reworkAoi Shinkai2007-09-211-12/+33
| | | | | | | Support CF IDE on R2D-1 boards. Signed-off-by: Aoi Shinkai <shinkoi2005@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: se7206: Handle non-SuperIO I/O ports.Paul Mundt2007-09-211-0/+2
| | | | | | | | | This fixes up the port calculation logic for non-SuperIO accesses, before these were always matching the MRSHPC base, now just make sure the original port is handed back if it's not in the I/O port range. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: r7780rp: irq-r7780rp needs linux/io.h.Paul Mundt2007-09-211-0/+1
| | | | | | Trivial build fix. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: hp6xx: Trivial build fixes for INTC changes.Paul Mundt2007-09-211-1/+1
| | | | | | Get the IRL->IRQ stuff building. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: se7206: heartbeat needs 32-bit writes.Paul Mundt2007-09-211-0/+1
| | | | | | | | Most boards use 8 or 16-bit access for the LED bank, se7206 needs 32. There's only 8 individual LEDs however, each with a 'special' value in terms of logical ordering. Go FPGA, go! Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: se7206: Make the I/O port routines less stupid.Paul Mundt2007-09-212-33/+4
| | | | | | | The port routines were logically inverted, and the MRSHPC range had no upper bound, causing 8 and 16-bit port I/O to get mangled. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: Magic Panel R2 board support.Markus Brunner2007-09-213-0/+330
| | | | | | | | | This adds support for the SH7720 (SH3-DSP) based Magic Panel R2 board. Signed-off-by: Markus Brunner <super.firetwister@gmail.com> Signed-off by: Mark Jonas <toertel@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: hp6xx: Enable touchscreen and powerbutton IRQs.Kristoffer Ericson2007-09-211-9/+24
| | | | | | | IRQ0->IRQ3 need to be an IRQ mode for these to work, fix them up. Signed-off-by: Kristoffer Ericson <Kristoffer.Ericson@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: hp6xx: Update CF IRQ for INTC changes.Kristoffer Ericson2007-09-211-1/+1
| | | | | | | The vector changed, so follow the INTC changes for the new vector. Signed-off-by: Kristoffer Ericson <Kristoffer.Ericson@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: hp6xx: APM build fix and new battery values.Kristoffer Ericson2007-09-211-5/+4
| | | | | | | | Build fixes for the hp6xx APM code, as well as some adjustments for the battery values. Signed-off-by: Kristoffer Ericson <Kristoffer.Ericson@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: Fix up se7751 build.Paul Mundt2007-09-211-1/+0
| | | | | | Trivial compile fix. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: intc - rework higlander irq code for r7780mp and r7785rpMagnus Damm2007-09-215-19/+152
| | | | | | | | | | | | | This patch reworks the highlander irq code for r7780mp and r7785rp. The same strategy as for the new R2D code is used here - the board specific interrupts are now starting from HL_FPGA_IRQ_BASE. The code for r7780rp is not touched due to lack of hardware. Tested with CF, AX88796 on r7780mp and r7785rp. The touch switch interrupt has also been tested on r7780mp. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: minor fixesMagnus Damm2007-09-211-1/+0
| | | | | | | | | | This patch contains the following fixes: - Adds sh7785 support to CONFIG_EARLY_SCIF_CONSOLE_PORT. - Removes duplicate include from rts7751r2d irq code. - Removes CONFIG_CPU_HAS_INTC from sh7720 Kconfig entry. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: Fix up heartbeat build and resource size.Paul Mundt2007-09-2111-15/+15
| | | | | | | | | We were abusing the resource size for the number of bits, this has been reworked using proper platform data, so this can be tidied up now. Boards in general only have a 1-byte wide resource, which the ioremap_nocache() case already handles. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: heartbeat driver update.Paul Mundt2007-09-216-20/+36
| | | | | | | | | Add some flags for the heartbeat driver, and kill off some duplication in the bit positions for the boards that don't have special cases. This also allows for variable access widths and inversion. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: intc - mark data structures as __initdataMagnus Damm2007-09-211-6/+4
| | | | | | | | | | | With the intc core improved it is now possible to put the intc data structures in the initdata section. Version two of this patch puts the __initdata inside DECLARE_INTC_DESC() and removes the __initdata included in the board specific r2d code. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: replace sh specific CONFIG_VOYAGERGX with CONFIG_MFD_SM501Magnus Damm2007-09-212-17/+24
| | | | | | | | | This patch replaces all instances of CONFIG_VOYAGERGX with CONFIG_MFD_SM501. While at it we make sure the r2d code compiles both with and without SM501. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: intc - convert board specific r2d codeMagnus Damm2007-09-213-58/+147
| | | | | | | | | | | | | | | | | | | | | This patch converts the board specific interrupt code for r2d to make use of intc. While at it we improve the Kconfig to avoid confusion. - Two sets of interrupt tables exist - one for R2D-1 and one for R2D-PLUS. - R2D-1 and R2D-PLUS use the same irq constants. - R2D-1 has AX88796 support, R2D-PLUS does not hook up that IRQ. - R2D-PLUS has KEY support, R2D-1 does not hook up that IRQ. - The number and order of IRQ values are disconnected from register bits. - Interrupt sources now start from IRQ 100. - The machvec demux function converts from irlm IRQ 0-14 to IRQ 100++. Tested on R2D-1 and R2D-PLUS boards. Version 2 adds CONFIG_RTS7751R2D_1 and CONFIG_RTS7751R2D_PLUS together with intc structured as __initdata. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: x3proto: Trivial ILSEL build fix.Paul Mundt2007-09-211-3/+3
| | | | Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: x3proto: Hook up ethernet and USB platform devices.Paul Mundt2007-09-211-0/+82
| | | | | | | Now that we have a way of enabling the IRQs, hook up the platform devices and wrap in to ILSEL for mapping the vectors. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: x3proto: ILSEL IRQ support.Paul Mundt2007-09-212-1/+152
| | | | | | | | This adds functionality for the on-board ILSEL IRQs that chain IRL mode events. Many on-board devices (ethernet, usb, etc.) rely on ILSEL IRQs directly. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: Initial support for SH-X3 prototype board.Paul Mundt2007-09-212-0/+55
| | | | | | | | This adds initial support for the SH-X3 prototype board. Only simple logic for the IRQ controller and the heartbeat driver for now. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: intc - convert voyagergx codeMagnus Damm2007-09-212-7/+4
| | | | | | | | | | | | | | | | | | | | This patch converts the sh-specific voyagergx interrupt code to make use of intc. A lot of "interesting" old cruft gets replaced with intc tables and some simple demux code. - All interrupt sources in the sm501 data sheet are now in the header. - The number and order of IRQ values are disconnected from register bits. - Interrupt sources now start from IRQ 200. - set_irq_chained_handler() is now used to hook up the demux function. In the future it would probably make sense to move the interrupt demuxer into into the mfd driver, but this is probably a nice step in the right direction until that happens. Tested on a R2D-1 board using the serial port hooked up to the sm501. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: intc - remove redundant irq code for shminMagnus Damm2007-09-211-25/+1
| | | | | | | | | This patch removes redundant interrupt code for the shmin board which is using a sh770x processor and 4 IRQ lines as individual interrupts (IRQ-mode). Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: intc - remove redundant irq code for sh03, snapgear and titanMagnus Damm2007-09-213-82/+4
| | | | | | | | | | | | | | This patch removes redundant board specific interrupt code for boards using sh775x processors and 4 IRQ lines in "Individual Interrupt Mode" aka IRLM. Three boards are affected: sh03, snapgear and titan. The right way to do this is to use cpu specific code provided by intc. A nice side effect is that sh03 now compiles, board not BROKEN any more. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: simplify se7780 IRQ codeMagnus Damm2007-09-211-27/+1
| | | | | | | | The new intc code handles IRQ3 and IRQ7 in the cpu specific code already, so there is no reason to duplicate that here. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: fix cf support on r2d boardsMagnus Damm2007-08-031-1/+8
| | | | | | | | This patch makes sure cf support is enabled on R2D-PLUS but disabled on R2D-1. Without this fix R2D-1 boards hang on bootup. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: remove support for sh7300 and solution engine 7300Magnus Damm2007-07-264-387/+0
| | | | | | | | | This patch removes old dead code: - kill off sh7300 cpu support - get rid of broken solution engine 7300 board support Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: remove support for sh73180 and solution engine 73180Magnus Damm2007-07-254-484/+0
| | | | | | | | | This patch removes old dead code: - kill off sh73180 cpu support - get rid of broken solution engine 73180 board support Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: zero terminate 8250 platform data for r2d boardMagnus Damm2007-07-201-1/+2
| | | | | | | struct plat_serial8250_port should contain a terminating zero entry Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: Fix up PCI section mismatch warnings.Paul Mundt2007-07-201-1/+1
| | | | | | | Flag pcibios_setup() and pcibios_fixup_bus() as __devinit. Follows the sh64 change. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: clean up interrupt code for solution engine 7722 boardMagnus Damm2007-07-202-68/+33
| | | | | | | | | | | This patch cleans up solution engine 7722 specific interrupt code. The main purpose is to replace the mux function with use of set_irq_chained_handler() and replace hard coded register poking code with set_irq_type(). The board specific interrupts are also moved to start from SE7722_FPGA_IRQ_BASE. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: r7780rp: Add R8A66597 and M66592 support.Yoshihiro Shimoda2007-07-201-0/+54
| | | | | | | | This wires up the platform devices for the USB expansion boards for the Highlander boards. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: Kill off dead mach.c for hp6xx.Kristoffer Ericson2007-07-121-44/+0
| | | | | Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* sh: rework ipr codeMagnus Damm2007-06-157-131/+175
| | | | | | | | | | | | | | | | | This patch reworks the ipr code by grouping the offset array together with the ipr_data structure in a new data structure called ipr_desc. This new structure also contains the name of the controller in struct irq_chip. The idea behind putting struct irq_chip in there is that we can use offsetof() to locate the base addresses in the irq_chip callbacks. This strategy has much in common with the recently merged intc2 code. One logic change has been made - the original ipr code enabled the interrupts by default but with this patch they are all disabled by default. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
OpenPOWER on IntegriCloud