summaryrefslogtreecommitdiffstats
path: root/arch/s390
Commit message (Collapse)AuthorAgeFilesLines
* mutex: have non-spinning mutexes on s390 by defaultHeiko Carstens2009-04-091-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Impact: performance regression fix for s390 The adaptive spinning mutexes will not always do what one would expect on virtualized architectures like s390. Especially the cpu_relax() loop in mutex_spin_on_owner might hurt if the mutex holding cpu has been scheduled away by the hypervisor. We would end up in a cpu_relax() loop when there is no chance that the state of the mutex changes until the target cpu has been scheduled again by the hypervisor. For that reason we should change the default behaviour to no-spin on s390. We do have an instruction which allows to yield the current cpu in favour of a different target cpu. Also we have an instruction which allows us to figure out if the target cpu is physically backed. However we need to do some performance tests until we can come up with a solution that will do the right thing on s390. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> LKML-Reference: <20090409184834.7a0df7b2@osiris.boeblingen.de.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* Merge branch 'ipi-for-linus' of ↵Linus Torvalds2009-04-031-6/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'ipi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: s390: remove arch specific smp_send_stop() panic: clean up kernel/panic.c panic, smp: provide smp_send_stop() wrapper on UP too panic: decrease oops_in_progress only after having done the panic generic-ipi: eliminate WARN_ON()s during oops/panic generic-ipi: cleanups generic-ipi: remove CSD_FLAG_WAIT generic-ipi: remove kmalloc() generic IPI: simplify barriers and locking
| * s390: remove arch specific smp_send_stop()Heiko Carstens2009-03-201-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | Impact: build fix on s390 !CONFIG_SMP Remove arch specific smp_send_stop for !CONFIG_SMP since it conflicts with a new generic version. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> LKML-Reference: <20090320092410.30d2bac3@osiris.boeblingen.de.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | Allow rwlocks to re-enable interruptsRobin Holt2009-04-021-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pass the original flags to rwlock arch-code, so that it can re-enable interrupts if implemented for that architecture. Initially, make __raw_read_lock_flags and __raw_write_lock_flags stubs which just do the same thing as non-flags variants. Signed-off-by: Petr Tesarik <ptesarik@suse.cz> Signed-off-by: Robin Holt <holt@sgi.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: <linux-arch@vger.kernel.org> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Simplify copy_thread()Alexey Dobriyan2009-04-021-1/+1
| | | | | | | | | | | | | | | | | | | | First argument unused since 2.3.11. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | generic debug pagealloc: build fixAkinobu Mita2009-04-021-9/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes a build failure with generic debug pagealloc: mm/debug-pagealloc.c: In function 'set_page_poison': mm/debug-pagealloc.c:8: error: 'struct page' has no member named 'debug_flags' mm/debug-pagealloc.c: In function 'clear_page_poison': mm/debug-pagealloc.c:13: error: 'struct page' has no member named 'debug_flags' mm/debug-pagealloc.c: In function 'page_poison': mm/debug-pagealloc.c:18: error: 'struct page' has no member named 'debug_flags' mm/debug-pagealloc.c: At top level: mm/debug-pagealloc.c:120: error: redefinition of 'kernel_map_pages' include/linux/mm.h:1278: error: previous definition of 'kernel_map_pages' was here mm/debug-pagealloc.c: In function 'kernel_map_pages': mm/debug-pagealloc.c:122: error: 'debug_pagealloc_enabled' undeclared (first use in this function) by fixing - debug_flags should be in struct page - define DEBUG_PAGEALLOC config option for all architectures Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Reported-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds2009-04-012-0/+4
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] cio: online_store - trigger recognition for boxed devices [S390] cio: disallow online setting of device in transient state [S390] cio: introduce notifier for boxed state [S390] cio: introduce ccw_device_schedule_sch_unregister [S390] cio: wake up on failed recognition [S390] fix hypfs build failure [PATCH] sysrq: include interrupt.h instead of irq.h
| * | [S390] cio: introduce notifier for boxed stateSebastian Ott2009-03-311-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If a ccw device did not respond in time during internal io, we set it into boxed state. With this patch we have the following behaviour: * the ccw driver will get a notification if the device was online and goes into the boxed state * if the device was disconnected and got boxed nothing special is to be done (it will be handled in reprobing later) * if the device got boxed while initial sensing it will be unregistered Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | [S390] fix hypfs build failureHeiko Carstens2009-03-311-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix build breakage below which probably was introduced with ("rcu: don't include unnecessary headers, allow kmemtrace w/ tracepoints"). CC arch/s390/hypfs/hypfs_diag.o arch/s390/hypfs/hypfs_diag.c: In function 'diag204_free_buffer': arch/s390/hypfs/hypfs_diag.c:364: error: implicit declaration of function 'free_pages' arch/s390/hypfs/hypfs_diag.c: In function 'diag204_alloc_rbuf': arch/s390/hypfs/hypfs_diag.c:384: error: implicit declaration of function '__get_free_pages' arch/s390/hypfs/hypfs_diag.c:384: error: 'GFP_KERNEL' undeclared (first use in this function) arch/s390/hypfs/hypfs_diag.c:384: error: (Each undeclared identifier is reported only once arch/s390/hypfs/hypfs_diag.c:384: error: for each function it appears in.) Reported-by: Sachin Sant <sachinp@in.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | | generic debug pageallocAkinobu Mita2009-04-012-0/+4
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_DEBUG_PAGEALLOC is now supported by x86, powerpc, sparc64, and s390. This patch implements it for the rest of the architectures by filling the pages with poison byte patterns after free_pages() and verifying the poison patterns before alloc_pages(). This generic one cannot detect invalid page accesses immediately but invalid read access may cause invalid dereference by poisoned memory and invalid write access can be detected after a long delay. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Merge branch 'for-linus' of ↵Linus Torvalds2009-03-271-1/+1
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (37 commits) fs: avoid I_NEW inodes Merge code for single and multiple-instance mounts Remove get_init_pts_sb() Move common mknod_ptmx() calls into caller Parse mount options just once and copy them to super block Unroll essentials of do_remount_sb() into devpts vfs: simple_set_mnt() should return void fs: move bdev code out of buffer.c constify dentry_operations: rest constify dentry_operations: configfs constify dentry_operations: sysfs constify dentry_operations: JFS constify dentry_operations: OCFS2 constify dentry_operations: GFS2 constify dentry_operations: FAT constify dentry_operations: FUSE constify dentry_operations: procfs constify dentry_operations: ecryptfs constify dentry_operations: CIFS constify dentry_operations: AFS ...
| * | generic compat_sys_ustatChristoph Hellwig2009-03-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Due to a different size of ino_t ustat needs a compat handler, but currently only x86 and mips provide one. Add a generic compat_sys_ustat and switch all architectures over to it. Instead of doing various user copy hacks compat_sys_ustat just reimplements sys_ustat as it's trivial. This was suggested by Arnd Bergmann. Found by Eric Sandeen when running xfstests/017 on ppc64, which causes stack smashing warnings on RHEL/Fedora due to the too large amount of data writen by the syscall. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* | | Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds2009-03-2648-726/+1688
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: (81 commits) [S390] remove duplicated #includes [S390] cpumask: use mm_cpumask() wrapper [S390] cpumask: Use accessors code. [S390] cpumask: prepare for iterators to only go to nr_cpu_ids/nr_cpumask_bits. [S390] cpumask: remove cpu_coregroup_map [S390] fix clock comparator save area usage [S390] Add hwcap flag for the etf3 enhancement facility [S390] Ensure that ipl panic notifier is called late. [S390] fix dfp elf hwcap/facility bit detection [S390] smp: perform initial cpu reset before starting a cpu [S390] smp: fix memory leak on __cpu_up [S390] ipl: Improve checking logic and remove switch defaults. [S390] s390dbf: Remove needless check for NULL pointer. [S390] s390dbf: Remove redundant initilizations. [S390] use kzfree() [S390] BUG to BUG_ON changes [S390] zfcpdump: Prevent zcore from beeing built as a kernel module. [S390] Use csum_partial in checksum.h [S390] cleanup lowcore.h [S390] eliminate ipl_device from lowcore ...
| * | | [S390] remove duplicated #includesHuang Weiyi2009-03-261-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove duplicated #include's in arch/s390/kernel/ipl.c. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | [S390] cpumask: use mm_cpumask() wrapperRusty Russell2009-03-263-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Makes code futureproof against the impending change to mm->cpu_vm_mask. It's also a chance to use the new cpumask_ ops which take a pointer (the older ones are deprecated, but there's no hurry for arch code). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | [S390] cpumask: Use accessors code.Rusty Russell2009-03-261-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Impact: use new API Use the accessors rather than frobbing bits directly. Most of this is in arch code I haven't even compiled, but is straightforward. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | [S390] cpumask: prepare for iterators to only go to nr_cpu_ids/nr_cpumask_bits.Rusty Russell2009-03-261-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Impact: cleanup, futureproof In fact, all cpumask ops will only be valid (in general) for bit numbers < nr_cpu_ids. So use that instead of NR_CPUS in various places (I also updated the immediate sites to use the new cpumask_ operators). This is always safe: no cpu number can be >= nr_cpu_ids, and nr_cpu_ids is initialized to NR_CPUS at boot. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Mike Travis <travis@sgi.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | [S390] cpumask: remove cpu_coregroup_mapRusty Russell2009-03-262-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Impact: cleanup cpu_coregroup_mask is the New Hotness. As S/390 uses theirs internally, so we just make it static. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | [S390] fix clock comparator save area usageHeiko Carstens2009-03-261-7/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The lowcore clock comparator save area on 64 bit machines is defined to contain only the seven most significant bits of the register. That's also why it starts at an uneven address (0x1331). The current code however writes eight bytes to the address and therefore overwrites the first byte of the access register save area. Fix this and write only seven bytes to the save area. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | [S390] Add hwcap flag for the etf3 enhancement facilityAndreas Krebbel2009-03-262-6/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Extended Translation Facility 3 (ETF3) added instructions which allow conversions between different unicode character maps (UTF-8, UTF-32 ...). These instructions got enhanced with a later version of the ETF3 allowing malformed multibyte chars to be recognized and reported correctly. The attached patch reserves bit 8 in the elf hwcaps vector for the enhanced version of ETF3. The bit corresponds to the stfle bits 22 and 30 and will only be set if both of the stfle bits are set. Signed-off-by: Andreas Krebbel <krebbel@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | [S390] Ensure that ipl panic notifier is called late.Michael Holzheu2009-03-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The s390 ipl panic notifier will stop the system or trigger a system dump. This should be done as final action on the panic path. All other panic notifiers should be executed before. Currently we use priority 0 for the ipl notifier. In order to be called late, this patch changes the priority to INT_MIN which is the lowest possible priority. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | [S390] fix dfp elf hwcap/facility bit detectionChristian Ehrhardt2009-03-261-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The old dfp detection wanted to check bit 43 (dfp high performance), but due to a wrong calculation always used to check bit 42. Additionally the "userspace expectation" is, that the dfp capability bit is set is if facility bit 42 (decimal floating point facility available) and bit 44 (perform floating point operation facility avail). The patch fixes the bit calculation and extends the check to work like: elf hw cap dfp bit = facility bits 42 (dfp) & 44 (pfpo) available Signed-off-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | [S390] smp: perform initial cpu reset before starting a cpuHeiko Carstens2009-03-261-7/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Performing an initial cpu reset makes sure all registers and tlbs of the targeted cpu are initialized and flushed. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | [S390] smp: fix memory leak on __cpu_upHeiko Carstens2009-03-262-5/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If sigp_set_prefix fails on __cpu_up we leak the lowcore structures and async+panic stacks for the failed cpu. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | [S390] ipl: Improve checking logic and remove switch defaults.Michael Holzheu2009-03-261-7/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A code analysis tool reported two warnings: "The expression `ipl_info.type == IPL_TYPE_FCP' is true whenever evaluated." and "Default is not possible". This patch improves the corresponding if statement logic and removes the unnecessary switch defaults. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | [S390] s390dbf: Remove needless check for NULL pointer.Michael Holzheu2009-03-261-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The check for NULL pointer has already be done before. Therefore we can remove the second check. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | [S390] s390dbf: Remove redundant initilizations.Michael Holzheu2009-03-261-2/+1
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | [S390] use kzfree()Johannes Weiner2009-03-261-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use kzfree() instead of memset() + kfree(). Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | [S390] BUG to BUG_ON changesStoyan Gaydarov2009-03-262-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Stoyan Gaydarov <stoyboyker@gmail.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | [S390] zfcpdump: Prevent zcore from beeing built as a kernel module.Michael Holzheu2009-03-263-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The zcore code switches to real addressing mode when creating a kernel dump. This is not possible, if it is built as a kernel module. With this patch zcore (zfcpdump) can't be built as a kernel module any more. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | [S390] Use csum_partial in checksum.hFrank Munzert2009-03-262-17/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The cksm function in system.h is duplicate to csum_partial in checksum.h. Remove cksm and use csum_partial instead. Signed-off-by: Frank Munzert <munzert@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | [S390] cleanup lowcore.hMartin Schwidefsky2009-03-262-323/+331
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The lowcore.h header has quite a lot of whitespace damage and a rather wild collection of entries. Remove all that whitespace and tidy up the order of the lowcore fields. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | [S390] eliminate ipl_device from lowcoreMartin Schwidefsky2009-03-265-10/+2
| | | | | | | | | | | | | | | | Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | [S390] eliminate cpuinfo_S390 structureMartin Schwidefsky2009-03-266-74/+51
| | | | | | | | | | | | | | | | Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | [S390] Fix comments in lowcore structureChristian Borntraeger2009-03-261-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes two addresses in the comments for the lowcore structure. Looks like an copy-paste bug. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | [S390] Expose a constant for the number of words representing the CRsDan Smith2009-03-262-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We need to use this value in the checkpoint/restart code and would like to have a constant instead of a magic '3'. Cc: linux-s390@vger.kernel.org Signed-off-by: Dan Smith <danms@us.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | [S390] use compiler builtin versions of strlen/strcpy/strcatHeiko Carstens2009-03-262-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use builtin variants if gcc 4 or newer is used to compile the kernel. Generates better code than the asm variants. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | [S390] module function call optimizationMartin Schwidefsky2009-03-261-7/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Avoid the detour over the PLT if the branch target of a function call in a module is in the range of the bras (16-bit) or brasl (32-bit) instruction. The PLT is still generated but it is unused. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | [S390] bitops: remove likely annotationsHeiko Carstens2009-03-261-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | likely/unlikely profiling revealed that none of the branches in bitops is taken likely or unlikely. So remove the annotations. In addition the generated code is shorter. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | [S390] remove duplicate nul-termination of stringHendrik Brueckner2009-03-261-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | strlcpy() does already NUL-terminate the destination string. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | [S390] allow usage of string functions in linux/string.hRusty Russell2009-03-261-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In introducing a trivial "strstarts()" function in linux/string.h, we hit the following error on s390: In file included from include/linux/bitmap.h:8, from include/linux/cpumask.h:142, from include/linux/smp.h:12, from /home/rusty/devel/kernel/patches/linux-2.6/arch/s390/include/asm/spinlock.h:14, from include/linux/spinlock.h:88, from include/linux/seqlock.h:29, from include/linux/time.h:8, from include/linux/stat.h:60, from include/linux/module.h:10, from arch/s390/lib/string.c:13: include/linux/string.h: In function 'strstarts': include/linux/string.h:124: error: implicit declaration of function 'strlen' include/linux/string.h:124: warning: incompatible implicit declaration of built-in function 'strlen' Because when including asm/string.h from arch/s390/lib/string.c we don't declare the string ops we are about to define, and linux/string.h barfs. The fix is to declare them in this IN_ARCH_STRING_C case, but in general I wonder if there's a neater fix. Reported-by: linux-next Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | [S390] qdio: report SIGA errors directlyJan Glauber2009-03-261-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Errors from SIGA instructions are stored in the per queue qdio_error and reported back when the queue handler is called. That opens a race when multiple error conditions occur simultanously. Report SIGA errors immediately in the return value of do_QDIO so the upper layer can react and SIGA errors no longer interfere with other errors. Move the SIGA error handling in qeth from the outbound handler to qeth_flush_buffers. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
| * | | [S390] kernel: Disable switch_amode by defaultGerald Schaefer2009-03-261-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Disable switch_amode by default because pagetable walk on pre z9 hardware has negative performance impact. Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | [S390] clock sync mode flagsMartin Schwidefsky2009-03-261-27/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The clock sync mode flag CLOCK_SYNC_STP is not cleared when stp is set offline. In this case the get_sync_clock() function returns -EACCESS and the dasd driver will block all i/o until stp is enabled again. In addition get_sync_clock can return -EACCESS if the clock is not in sync instead of -EAGAIN. Rework the stp/etr online handling to fix these problems. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | [S390] move EXPORT_SYMBOLs to definitionsHeiko Carstens2009-03-266-44/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Move all EXPORT_SYMBOLs to their corresponding definitions. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | [S390] convert bitmap definitions to CHeiko Carstens2009-03-263-57/+50
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | [S390] Remove CONFIG_MACHCHK_WARNING.Heiko Carstens2009-03-262-25/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Everybody enables it so there is no point for an extra config option. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | [S390] split/move machine check handler codeHeiko Carstens2009-03-266-5/+520
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Split machine check handler code and move it to cio and kernel code where it belongs to. No functional change. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | [S390] Fix appldata build break with !NETSachin Sant2009-03-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With CONFIG_NET not set appldata build breaks on s390. arch/s390/appldata/built-in.o: In function appldata_get_net_sum_data: appldata_net_sum.c:(.text+0x2684): undefined reference to dev_get_stats appldata_net_sum.c:(.text+0x2688): undefined reference to init_net appldata_net_sum.c:(.text+0x268c): undefined reference to init_net appldata_net_sum.c:(.text+0x2694): undefined reference to dev_base_lock The following patch fixes the issue for me. Signed-off-by: Sachin Sant <sachinp@in.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | | [S390] Fix hypervisor detection for KVMChristian Borntraeger2009-03-264-10/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently we use the cpuid (via STIDP instruction) to recognize LPAR, z/VM and KVM. The architecture states, that bit 0-7 of STIDP returns all zero, and if STIDP is executed in a virtual machine, the VM operating system will replace bits 0-7 with FF. KVM should not use FE to distinguish z/VM from KVM for interested guests. The proper way to detect the hypervisor is the STSI (Store System Information) instruction, which return information about the hypervisors via function code 3, selector1=2, selector2=2. This patch changes the detection routine of Linux to use STSI instead of STIDP. This detection is earlier than bootmem, we have to use a static buffer. Since STSI expects a 4kb block (4kb aligned) this patch also changes the init.data alignment for s390. As this section will be freed during boot, this should be no problem. Patch is tested with LPAR, z/VM, KVM on LPAR, and KVM under z/VM. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
OpenPOWER on IntegriCloud