summaryrefslogtreecommitdiffstats
path: root/arch/s390/include
Commit message (Collapse)AuthorAgeFilesLines
* compat: Make compat_alloc_user_space() incorporate the access_ok()H. Peter Anvin2010-09-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | compat_alloc_user_space() expects the caller to independently call access_ok() to verify the returned area. A missing call could introduce problems on some architectures. This patch incorporates the access_ok() check into compat_alloc_user_space() and also adds a sanity check on the length. The existing compat_alloc_user_space() implementations are renamed arch_compat_alloc_user_space() and are used as part of the implementation of the new global function. This patch assumes NULL will cause __get_user()/__put_user() to either fail or access userspace on all architectures. This should be followed by checking the return value of compat_access_user_space() for NULL in the callers, at which time the access_ok() in the callers can also be removed. Reported-by: Ben Hawkes <hawkes@sota.gen.nz> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Tony Luck <tony.luck@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: James Bottomley <jejb@parisc-linux.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: <stable@kernel.org>
* [S390] fix tlb flushing vs. concurrent /proc accessesMartin Schwidefsky2010-08-246-6/+24
| | | | | | | | | | | | | | | | The tlb flushing code uses the mm_users field of the mm_struct to decide if each page table entry needs to be flushed individually with IPTE or if a global flush for the mm_struct is sufficient after all page table updates have been done. The comment for mm_users says "How many users with user space?" but the /proc code increases mm_users after it found the process structure by pid without creating a new user process. Which makes mm_users useless for the decision between the two tlb flusing methods. The current code can be confused to not flush tlb entries by a concurrent access to /proc files if e.g. a fork is in progres. The solution for this problem is to make the tlb flushing logic independent from the mm_users field. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* archs: replace unifdef-y with header-ySam Ravnborg2010-08-141-6/+5
| | | | | | unifdef-y and header-y have same semantic, so drop unifdef-y Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
* [S390] wire up prlimit64 and fanotify* syscallsHeiko Carstens2010-08-131-1/+4
| | | | | Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* Merge branch 'for-2.6.36' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds2010-08-101-2/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-2.6.36' of git://git.kernel.dk/linux-2.6-block: (149 commits) block: make sure that REQ_* types are seen even with CONFIG_BLOCK=n xen-blkfront: fix missing out label blkdev: fix blkdev_issue_zeroout return value block: update request stacking methods to support discards block: fix missing export of blk_types.h writeback: fix bad _bh spinlock nesting drbd: revert "delay probes", feature is being re-implemented differently drbd: Initialize all members of sync_conf to their defaults [Bugz 315] drbd: Disable delay probes for the upcomming release writeback: cleanup bdi_register writeback: add new tracepoints writeback: remove unnecessary init_timer call writeback: optimize periodic bdi thread wakeups writeback: prevent unnecessary bdi threads wakeups writeback: move bdi threads exiting logic to the forker thread writeback: restructure bdi forker loop a little writeback: move last_active to bdi writeback: do not remove bdi from bdi_list writeback: simplify bdi code a little writeback: do not lose wake-ups in bdi threads ... Fixed up pretty trivial conflicts in drivers/block/virtio_blk.c and drivers/scsi/scsi_error.c as per Jens.
| * remove needless ISA_DMA_THRESHOLDFUJITA Tomonori2010-08-071-2/+0
| | | | | | | | | | | | | | | | | | Architectures don't need to define ISA_DMA_THRESHOLD anymore. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: James Bottomley <James.Bottomley@suse.de> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6Linus Torvalds2010-08-101-0/+2
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (68 commits) U6715 16550A serial driver support Char: nozomi, set tty->driver_data appropriately Char: nozomi, fix tty->count counting serial: max3107: Fix gpiolib support hsu: call PCI pm hooks in suspend/resume function hsu: some code cleanup hsu: add a periodic timer to check dma rx channel hsu: driver for Medfield High Speed UART device mxser: remove unnesesary NULL check serial: add support for OX16PCI958 card serial: 68328serial.c: remove dead (ALMA_ANS | DRAGONIXVZ | M68EZ328ADS) timbuart: use __devinit and __devexit macros for probe and remove serial: MMIO32 support for 8250_early.c serial: mcf: don't take spinlocks in already protected functions serial: general fixes in the serial_rs485 structure serial: fix missing bit coverage of ASYNC_FLAGS serial: "altera_uart: simplify altera_uart_console_putc()" checkpatch fixes serial: crisv10: formatting of pointers in printk() vt: Fix warning: statement with no effect due to vt_kern.h tty_io: remove casts from void* ...
| * | tty: Add EXTPROC support for LINEMODEhyc@symas.com2010-08-101-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is against the 2.6.34 source. Paraphrased from the 1989 BSD patch by David Borman @ cray.com: These are the changes needed for the kernel to support LINEMODE in the server. There is a new bit in the termios local flag word, EXTPROC. When this bit is set, several aspects of the terminal driver are disabled. Input line editing, character echo, and mapping of signals are all disabled. This allows the telnetd to turn off these functions when in linemode, but still keep track of what state the user wants the terminal to be in. New ioctl: TIOCSIG Generate a signal to processes in the current process group of the pty. There is a new mode for packet driver, the TIOCPKT_IOCTL bit. When packet mode is turned on in the pty, and the EXTPROC bit is set, then whenever the state of the pty is changed, the next read on the master side of the pty will have the TIOCPKT_IOCTL bit set. This allows the process on the server side of the pty to know when the state of the terminal has changed; it can then issue the appropriate ioctl to retrieve the new state. Since the original BSD patches accompanied the source code for telnet I've left that reference here, but obviously the feature is useful for any remote terminal protocol, including ssh. The corresponding feature has existed in the BSD tty driver since 1989. For historical reference, a good copy of the relevant files can be found here: http://anonsvn.mit.edu/viewvc/krb5/trunk/src/appl/telnet/?pathrev=17741 Signed-off-by: Howard Chu <hyc@symas.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds2010-08-102-2/+2
|\ \ \ | |/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] dasd: tunable missing interrupt handler [S390] dasd: allocate fallback cqr for reserve/release [S390] topology: use default MC domain initializer [S390] initrd: change default load address [S390] cmm, smsgiucv_app: convert sender to uppercase [S390] cmm: add missing __init/__exit annotations [S390] cio: use all available paths for some internal I/O [S390] ccwreq: add ability to use all paths [S390] cio: ccw_device_online_store return -EINVAL in case of missing driver [S390] cio: Log the response from the unit check handler [S390] cio: CHSC SIOSL Support
| * | [S390] topology: use default MC domain initializerHeiko Carstens2010-08-091-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use default MC sched domain initializer, since performance meassurements finally showed that this is indeed better. Besides the fact that the powersavings flags functions didn't make too much sense, but were unused anyway. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | [S390] cio: CHSC SIOSL SupportMichael Ernst2010-08-091-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A Linux interface for the CHSC command store-I/O-operation-status-and-initiate-logging (SIOSL). Model-dependent logging within the channel subsystem can be invoked via a helper function or a writable subchannel device attribute. Signed-off-by: Michael Ernst <mernst@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | | Merge branch 'for-linus' of ↵Linus Torvalds2010-08-101-3/+6
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (96 commits) no need for list_for_each_entry_safe()/resetting with superblock list Fix sget() race with failing mount vfs: don't hold s_umount over close_bdev_exclusive() call sysv: do not mark superblock dirty on remount sysv: do not mark superblock dirty on mount btrfs: remove junk sb_dirt change BFS: clean up the superblock usage AFFS: wait for sb synchronization when needed AFFS: clean up dirty flag usage cifs: truncate fallout mbcache: fix shrinker function return value mbcache: Remove unused features add f_flags to struct statfs(64) pass a struct path to vfs_statfs update VFS documentation for method changes. All filesystems that need invalidate_inode_buffers() are doing that explicitly convert remaining ->clear_inode() to ->evict_inode() Make ->drop_inode() just return whether inode needs to be dropped fs/inode.c:clear_inode() is gone fs/inode.c:evict() doesn't care about delete vs. non-delete paths now ... Fix up trivial conflicts in fs/nilfs2/super.c
| * | | add f_flags to struct statfs(64)Christoph Hellwig2010-08-091-3/+6
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | Add a flags field to help glibc implementing statvfs(3) efficiently. We copy the flag values from glibc, and add a new ST_VALID flag to denote that f_flags is implemented. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* | | mm: provide init_mm mm_context initializerHeiko Carstens2010-08-091-0/+5
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Provide an INIT_MM_CONTEXT intializer macro which can be used to statically initialize mm_struct:mm_context of init_mm. This way we can get rid of code which will do the initialization at run time (on s390). In addition the current code can be found at a place where it is not expected. So let's have a common initializer which architectures can use if needed. This is based on a patch from Suzuki Poulose. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Suzuki Poulose <suzuki@in.ibm.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Merge branch 'perf-core-for-linus' of ↵Linus Torvalds2010-08-061-0/+1
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (162 commits) tracing/kprobes: unregister_trace_probe needs to be called under mutex perf: expose event__process function perf events: Fix mmap offset determination perf, powerpc: fsl_emb: Restore setting perf_sample_data.period perf, powerpc: Convert the FSL driver to use local64_t perf tools: Don't keep unreferenced maps when unmaps are detected perf session: Invalidate last_match when removing threads from rb_tree perf session: Free the ref_reloc_sym memory at the right place x86,mmiotrace: Add support for tracing STOS instruction perf, sched migration: Librarize task states and event headers helpers perf, sched migration: Librarize the GUI class perf, sched migration: Make the GUI class client agnostic perf, sched migration: Make it vertically scrollable perf, sched migration: Parameterize cpu height and spacing perf, sched migration: Fix key bindings perf, sched migration: Ignore unhandled task states perf, sched migration: Handle ignored migrate out events perf: New migration tool overview tracing: Drop cpparg() macro perf: Use tracepoint_synchronize_unregister() to flush any pending tracepoint call ... Fix up trivial conflicts in Makefile and drivers/cpufreq/cpufreq.c
| * \ Merge commit 'v2.6.35-rc3' into perf/coreIngo Molnar2010-06-181-1/+1
| |\ \ | | |/ | | | | | | Merge reason: Go from -rc1 base to -rc3 base, merge in fixes.
| * | arch: Implement local64_tPeter Zijlstra2010-06-091-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On 64bit, local_t is of size long, and thus we make local64_t an alias. On 32bit, we fall back to atomic64_t. (architecture can provide optimized 32-bit version) (This new facility is to be used by perf events optimizations.) Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: linux-arch@vger.kernel.org Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
* | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds2010-08-041-0/+6
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (276 commits) [SCSI] zfcp: Trigger logging in the FCP channel on qdio error conditions [SCSI] zfcp: Introduce experimental support for DIF/DIX [SCSI] zfcp: Enable data division support for FCP devices [SCSI] zfcp: Prevent access on uninitialized memory. [SCSI] zfcp: Post events through FC transport class [SCSI] zfcp: Cleanup QDIO attachment and improve processing. [SCSI] zfcp: Cleanup function parameters for sbal value. [SCSI] zfcp: Use correct width for timer_interval field [SCSI] zfcp: Remove SCSI device when removing unit [SCSI] zfcp: Use memdup_user and kstrdup [SCSI] zfcp: Fix retry after failed "open port" erp action [SCSI] zfcp: Fail erp after timeout [SCSI] zfcp: Use forced_reopen in terminate_rport_io callback [SCSI] zfcp: Register SCSI devices after successful fc_remote_port_add [SCSI] zfcp: Do not try "forced close" when port is already closed [SCSI] zfcp: Do not unblock rport from REOPEN_PORT_FORCED [SCSI] sd: add support for runtime PM [SCSI] implement runtime Power Management [SCSI] convert to the new PM framework [SCSI] Unify SAM_ and SAM_STAT_ macros ...
| * | | [SCSI] zfcp: Enable data division support for FCP devicesChristof Schmitt2010-07-281-0/+6
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | Try to enable data division support for FCP devices and indicate in the adapter status flag if it succeeded. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | | KVM: Remove unnecessary divide operationsJoerg Roedel2010-08-011-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch converts unnecessary divide and modulo operations in the KVM large page related code into logical operations. This allows to convert gfn_t to u64 while not breaking 32 bit builds. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
* | | KVM: s390: Don't exit SIE on SIGP sense runningChristian Borntraeger2010-08-011-1/+1
|/ / | | | | | | | | | | | | | | | | | | Newer (guest) kernels use sigp sense running in their spinlock implementation to check if the other cpu is running before yielding the processor. This revealed some wrong guest settings, causing unnecessary exits for every sigp sense running. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
* | Merge branch 'for-35' of git://repo.or.cz/linux-kbuildLinus Torvalds2010-06-011-1/+1
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-35' of git://repo.or.cz/linux-kbuild: (81 commits) kbuild: Revert part of e8d400a to resolve a conflict kbuild: Fix checking of scm-identifier variable gconfig: add support to show hidden options that have prompts menuconfig: add support to show hidden options which have prompts gconfig: remove show_debug option gconfig: remove dbg_print_ptype() and dbg_print_stype() kconfig: fix zconfdump() kconfig: some small fixes add random binaries to .gitignore kbuild: Include gen_initramfs_list.sh and the file list in the .d file kconfig: recalc symbol value before showing search results .gitignore: ignore *.lzo files headerdep: perlcritic warning scripts/Makefile.lib: Align the output of LZO kbuild: Generate modules.builtin in make modules_install Revert "kbuild: specify absolute paths for cscope" kbuild: Do not unnecessarily regenerate modules.builtin headers_install: use local file handles headers_check: fix perl warnings export_report: fix perl warnings ...
| * Rename .data.read_mostly to .data..read_mostly.Denys Vlasenko2010-03-031-1/+1
| | | | | | | | | | Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
* | Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds2010-05-272-0/+29
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] fill out file list in s390 MAINTAINERS entry [S390] Add support for LZO-compressed kernels. [S390] cmm: get rid of CMM_PROC config option [S390] cmm: remove superfluous EXPORT_SYMBOLs plus cleanups [S390] dasd: unit check handling during internal cio I/O [S390] cio: unit check handling during internal I/O [S390] ccwgroup: add locking around drvdata access [S390] cio: remove stsch [S390] spp: remove KVM_AWARE_CMF config option [S390] kprobes: forbid probing of stnsm/stosm/epsw [S390] spp: fix compilation for CONFIG_32BIT [S390] atomic: implement atomic64_dec_if_positive [S390] cmm: fix crash on module unload
| * | [S390] cio: unit check handling during internal I/OMichael Ernst2010-05-261-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | Send unit checks that occur during internal I/O to the device driver and react according to its return code. Signed-off-by: Michael Ernst <mernst@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
| * | [S390] atomic: implement atomic64_dec_if_positiveHeiko Carstens2010-05-261-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | Implement atomic64_dec_if_positive and add missing system.h header include. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | | asm-generic: remove ISA_DMA_THRESHOLD in scatterlist.hFUJITA Tomonori2010-05-271-0/+2
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is the first half of the attempt to use asm-generic/scatterlist.h on every architecture. There are only two ways to define scatterlist structure. So it's easy to convert every architecture to use asm-generic/scatterlist.h. This patch: The trick for ISA_DMA_THRESHOLD in asm-generic/scatterlist.h doesn't work for powerpc. This lets architectures defin ISA_DMA_THRESHOLD. Hopefully, we can remove ISA_DMA_THRESHOLD in the future; we can do better to decide if the bouncing is necessary or not. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Revert "endian: #define __BYTE_ORDER"Linus Torvalds2010-05-261-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit b3b77c8caef1750ebeea1054e39e358550ea9f55, which was also totally broken (see commit 0d2daf5cc858 that reverted the crc32 version of it). As reported by Stephen Rothwell, it causes problems on big-endian machines: > In file included from fs/jfs/jfs_types.h:33, > from fs/jfs/jfs_incore.h:26, > from fs/jfs/file.c:22: > fs/jfs/endian24.h:36:101: warning: "__LITTLE_ENDIAN" is not defined The kernel has never had that crazy "__BYTE_ORDER == __LITTLE_ENDIAN" model. It's not how we do things, and it isn't how we _should_ do things. So don't go there. Requested-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | endian: #define __BYTE_ORDERJoakim Tjernlund2010-05-251-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Linux does not define __BYTE_ORDER in its endian header files which makes some header files bend backwards to get at the current endian. Lets #define __BYTE_ORDER in big_endian.h/litte_endian.h to make it easier for header files that are used in user space too. In userspace the convention is that 1. _both_ __LITTLE_ENDIAN and __BIG_ENDIAN are defined, 2. you have to test for e.g. __BYTE_ORDER == __BIG_ENDIAN. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Merge git://git.infradead.org/iommu-2.6Linus Torvalds2010-05-211-4/+4
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.infradead.org/iommu-2.6: intel-iommu: Set a more specific taint flag for invalid BIOS DMAR tables intel-iommu: Combine the BIOS DMAR table warning messages panic: Add taint flag TAINT_FIRMWARE_WORKAROUND ('I') panic: Allow warnings to set different taint flags intel-iommu: intel_iommu_map_range failed at very end of address space intel-iommu: errors with smaller iommu widths intel-iommu: Fix boot inside 64bit virtualbox with io-apic disabled intel-iommu: use physfn to search drhd for VF intel-iommu: Print out iommu seq_id intel-iommu: Don't complain that ACPI_DMAR_SCOPE_TYPE_IOAPIC is not supported intel-iommu: Avoid global flushes with caching mode. intel-iommu: Use correct domain ID when caching mode is enabled intel-iommu mistakenly uses offset_pfn when caching mode is enabled intel-iommu: use for_each_set_bit() intel-iommu: Fix section mismatch dmar_ir_support() uses dmar_tbl.
| * | panic: Allow warnings to set different taint flagsBen Hutchings2010-05-191-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | WARN() is used in some places to report firmware or hardware bugs that are then worked-around. These bugs do not affect the stability of the kernel and should not set the flag for TAINT_WARN. To allow for this, add WARN_TAINT() and WARN_TAINT_ONCE() macros that take a taint number as argument. Architectures that implement warnings using trap instructions instead of calls to warn_slowpath_*() now implement __WARN_TAINT(taint) instead of __WARN(). Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: Helge Deller <deller@gmx.de> Tested-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* | | Merge branch 'for-linus' of ↵Linus Torvalds2010-05-201-1/+1
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (44 commits) vlynq: make whole Kconfig-menu dependant on architecture add descriptive comment for TIF_MEMDIE task flag declaration. EEPROM: max6875: Header file cleanup EEPROM: 93cx6: Header file cleanup EEPROM: Header file cleanup agp: use NULL instead of 0 when pointer is needed rtc-v3020: make bitfield unsigned PCI: make bitfield unsigned jbd2: use NULL instead of 0 when pointer is needed cciss: fix shadows sparse warning doc: inode uses a mutex instead of a semaphore. uml: i386: Avoid redefinition of NR_syscalls fix "seperate" typos in comments cocbalt_lcdfb: correct sections doc: Change urls for sparse Powerpc: wii: Fix typo in comment i2o: cleanup some exit paths Documentation/: it's -> its where appropriate UML: Fix compiler warning due to missing task_struct declaration UML: add kernel.h include to signal.c ...
| * | | add descriptive comment for TIF_MEMDIE task flag declaration.Andreas Dilger2010-05-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Andreas Dilger <adilger@dilger.ca> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | | | [S390] s390_hypfs: Add new attributesMichael Holzheu2010-05-171-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to access the data of the hypfs diagnose calls from user space also in binary form, this patch adds two new attributes in debugfs: * z/VM: s390_hypfs/d2fc_bin * LPAR: s390_hypfs/d204_bin Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | | | [S390] qdio: remove API wrappersJan Glauber2010-05-171-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove qdio API wrappers used by qeth and replace them by calling the appropriate functions directly. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | | | [S390] topology: expose core identifierHeiko Carstens2010-05-171-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Provide a topology_core_id define which makes sure that the contents of /sys/devices/system/cpu/cpuX/topology/core_id indeed do contain the core id and not always 0. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | | | [S390] add breaking event address for user spaceMartin Schwidefsky2010-05-172-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Copy the last breaking event address from the lowcore to a new field in the thread_struct on each system entry. Add a new ptrace request PTRACE_GET_LAST_BREAK and a new utrace regset REGSET_LAST_BREAK to query the last breaking event. This is useful for debugging wild branches in user space code. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | | | [S390] virtualization aware cpu measurementCarsten Otte2010-05-172-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the SPP instruction to set a tag on entry to / exit of the virtual machine context. This allows the cpu measurement facility to distinguish the samples from the host and the different guests. Signed-off-by: Carsten Otte <cotte@de.ibm.com>
* | | | [S390] idle time accounting vs. machine checksMartin Schwidefsky2010-05-172-51/+56
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A machine check can interrupt the i/o and external interrupt handler anytime. If the machine check occurs while the interrupt handler is waking up from idle vtime_start_cpu can get executed a second time and the int_clock / async_enter_timer values in the lowcore get clobbered. This can confuse the cpu time accounting. To fix this problem two changes are needed. First the machine check handler has to use its own copies of int_clock and async_enter_timer, named mcck_clock and mcck_enter_timer. Second the nested execution of vtime_start_cpu has to be prevented. This is done in s390_idle_check by checking the wait bit in the program status word. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | | | [S390] improve irq tracing code in entry[64].SMartin Schwidefsky2010-05-171-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The system call path in entry[64].S is run with interrupts enabled. Remove the irq tracing check from the system call exit code. If a program check interrupted a context enabled for interrupts do a call to trace_irq_off_caller in the program check handler before branching to the system call exit code. Restructure the system call and io interrupt return code to avoid avoid the lpsw[e] to disable machine checks. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | | | [S390] More cleanup for struct _lowcoreMartin Schwidefsky2010-05-171-25/+23
|/ / / | | | | | | | | | | | | | | | Remove cpu_id from lowcore and replace addr_t with __u64. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | | [S390] vdso: use ntp adjusted clock multiplierHendrik Brueckner2010-04-221-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit "timekeeping: Fix clock_gettime vsyscall time warp" (0696b711e) introduced the new parameter "mult" to update_vsyscall(). This parameter contains the internal NTP adjusted clock multiplier. The s390x vdso did not use this adjusted multiplier. Instead, it used the constant clock multiplier for gettimeofday() and clock_gettime() variants. This may result in observable time warps as explained in commit 0696b711e. Make the NTP adjusted clock multiplier available to the s390x vdso implementation and use it for time calculations. Cc: <stable@kernel.org> Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | | [S390] increase default size of vmalloc areaMartin Schwidefsky2010-04-091-3/+3
|/ / | | | | | | | | | | | | | | | | | | The default size of the vmalloc area is currently 1 GB. The memory resource controller uses about 10 MB of vmalloc space per gigabyte of memory. That turns a system with more than ~100 GB memory unbootable with the default vmalloc size. It costs us nothing to increase the default size to some more adequate value, e.g. 128 GB. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | [S390] system.h: Fix compile error for 1 and 2 byte cmpxchgChristian Borntraeger2010-03-241-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 024914477e15ef8b17f271ec47f1bb8a589f0806 "memcg: move charges of anonymous swap" revealed that the 1 byte and 2 byte cmpxchg is currently broken: arch/s390/include/asm/system.h: Assembler messages: arch/s390/include/asm/system.h:241: Error: junk at end of line: `(%r5)' make[1]: *** [mm/page_cgroup.o] Error 1 make[1]: *** Waiting for unfinished jobs.... It turned out that commit 987bcdacb18a3adc2a48d85c9b005069c2f4dd7b ([S390] use inline assembly contraints available with gcc 3.3.3) broke the inline assembly. The or operands are now in constraint 3 and 4 instead of 2 and 3. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | [S390] zcore: CPU registers are not saved under LPARMichael Holzheu2010-03-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | To save the registers for all CPUs a sigp "store status" is done that stores the registers to address absolute zero. To access storage at absolute zero, normally the address of the prefix register of the accessing CPU has to be used. This does not work when large pages are active (currently only under LPAR). In order to fix that problem, instead of memcpy memcpy_real is used, which switches to real mode where prefixing works. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* | Merge branch 'for-linus' of ↵Linus Torvalds2010-03-121-1/+1
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (56 commits) doc: fix typo in comment explaining rb_tree usage Remove fs/ntfs/ChangeLog doc: fix console doc typo doc: cpuset: Update the cpuset flag file Fix of spelling in arch/sparc/kernel/leon_kernel.c no longer needed Remove drivers/parport/ChangeLog Remove drivers/char/ChangeLog doc: typo - Table 1-2 should refer to "status", not "statm" tree-wide: fix typos "ass?o[sc]iac?te" -> "associate" in comments No need to patch AMD-provided drivers/gpu/drm/radeon/atombios.h devres/irq: Fix devm_irq_match comment Remove reference to kthread_create_on_cpu tree-wide: Assorted spelling fixes tree-wide: fix 'lenght' typo in comments and code drm/kms: fix spelling in error message doc: capitalization and other minor fixes in pnp doc devres: typo fix s/dev/devm/ Remove redundant trailing semicolons from macros fix typo "definetly" -> "definitely" in comment tree-wide: s/widht/width/g typo in comments ... Fix trivial conflict in Documentation/laptops/00-INDEX
| * \ Merge branch 'for-next' into for-linusJiri Kosina2010-03-081-1/+1
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: Documentation/filesystems/proc.txt arch/arm/mach-u300/include/mach/debug-macro.S drivers/net/qlge/qlge_ethtool.c drivers/net/qlge/qlge_main.c drivers/net/typhoon.c
| | * | tree-wide: Assorted spelling fixesDaniel Mack2010-02-091-1/+1
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In particular, several occurances of funny versions of 'success', 'unknown', 'therefore', 'acknowledge', 'argument', 'achieve', 'address', 'beginning', 'desirable', 'separate' and 'necessary' are fixed. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Joe Perches <joe@perches.com> Cc: Junio C Hamano <gitster@pobox.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | | ptrace: move user_enable_single_step & co prototypes to linux/ptrace.hChristoph Hellwig2010-03-121-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While in theory user_enable_single_step/user_disable_single_step/ user_enable_blockstep could also be provided as an inline or macro there's no good reason to do so, and having the prototype in one places keeps code size and confusion down. Roland said: The original thought there was that user_enable_single_step() et al might well be only an instruction or three on a sane machine (as if we have any of those!), and since there is only one call site inlining would be beneficial. But I agree that there is no strong reason to care about inlining it. As to the arch changes, there is only one thought I'd add to the record. It was always my thinking that for an arch where PTRACE_SINGLESTEP does text-modifying breakpoint insertion, user_enable_single_step() should not be provided. That is, arch_has_single_step()=>true means that there is an arch facility with "pure" semantics that does not have any unexpected side effects. Inserting a breakpoint might do very unexpected strange things in multi-threaded situations. Aside from that, it is a peculiar side effect that user_{enable,disable}_single_step() should cause COW de-sharing of text pages and so forth. For PTRACE_SINGLESTEP, all these peculiarities are the status quo ante for that arch, so having arch_ptrace() itself do those is one thing. But for building other things in the future, it is nicer to have a uniform "pure" semantics that arch-independent code can expect. OTOH, all such arch issues are really up to the arch maintainer. As of today, there is nothing but ptrace using user_enable_single_step() et al so it's a distinction without a practical difference. If/when there are other facilities that use user_enable_single_step() and might care, the affected arch's can revisit the question when someone cares about the quality of the arch support for said new facility. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | improve sys_newuname() for compat architecturesChristoph Hellwig2010-03-121-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On an architecture that supports 32-bit compat we need to override the reported machine in uname with the 32-bit value. Instead of doing this separately in every architecture introduce a COMPAT_UTS_MACHINE define in <asm/compat.h> and apply it directly in sys_newuname(). Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: James Morris <jmorris@namei.org> Cc: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
OpenPOWER on IntegriCloud