summaryrefslogtreecommitdiffstats
path: root/arch/powerpc
Commit message (Collapse)AuthorAgeFilesLines
* [POWERPC] Make sure __cpu_preinit_ppc970 gets called on 970GX processorsOlof Johansson2006-10-261-0/+2
| | | | | | | Add check for 970GX for __cpu_preinit_ppc970. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Fix CHRP platforms with only 8259Benjamin Herrenschmidt2006-10-252-1/+8
| | | | | | | | | | | On CHRP platforms with only a 8259 controller, we should set the default IRQ host to the 8259 driver's one for the IRQ probing fallbacks to work in case the IRQ tree is incorrect (like on Pegasos for example). Without this fix, we get a bunch of WARN_ON's during boot. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] IPIC: Fix spinlock recursion in set_irq_handlerScott Wood2006-10-251-2/+2
| | | | | | | | | | | | | | | | | | | | | This causes ipic_set_irq_type to set the handler directly rather than call set_irq_handler, which causes spinlock recursion because the lock is already held when ipic_set_irq_type is called. I'm also not convinced that ipic_set_irq_type should be changing the handler at all. There seem to be several controllers that don't and several that do. Those that do would break what appears to be a common usage of calling set_irq_chip_and_handler followed by set_irq_type, if a non-standard handler were to be used. OTOH, irq_create_of_mapping() doesn't set the handler, but only calls set_irq_type(). This patch gets things working in the spinlock-debugging-enabled case, but I'm curious as to where the handler setting is ideally supposed to be done. I don't see any documentation on set_irq_type() that clarifies what the semantics are supposed to be. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Fix the UCC rx/tx clock of QELiu Dave-r632382006-10-251-0/+2
| | | | | | | | | | MPC8323EMDS board ethernet interface with RMII uses the CLK16 divisor for the rx and tx clock, but the ucc_set_qe_mux_rxtx() function doesn't handle the CLK16 setting of the CMXUCR3 and CMXUCR4 registers. This fixes it. Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] cell: update defconfigArnd Bergmann2006-10-251-6/+13
| | | | | | =================================================================== Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] spufs: fix another off-by-one bug in spufs_mbox_readArnd Bergmann2006-10-251-1/+1
| | | | | | | | | | | | | | | | Currently, spufs_mbox_read transfers more bytes than requested on a read. If you ask for four bytes, you get eight. This fixes it to transfer the largest multiple of four bytes that is less than or equal to the number you asked for. Note: one nasty property of this file in spufs is that you can only read multiples of four bytes in the first place, since there is no way to atomically put back a few bytes into the hardware register. Thus, reading less than four bytes returns -EINVAL. Asking for more than four returns the largest possible multiple of four. Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] spufs: fix signal2 file to report signal2Dwayne Grant Mcconnell2006-10-251-1/+1
| | | | | | | | This fixes the /signal2 file to actually give signal2 data. Signed-off-by: Dwayne Grant Mcconnell <decimal@us.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Fix device_is_compatible() const warningBenjamin Herrenschmidt2006-10-251-3/+5
| | | | | | | | | Fix a const'ification related warning with device_is_compatible() and friends related to get_property() not properly having const on it's input device node argument. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Cell timebase bug workaroundBenjamin Herrenschmidt2006-10-251-2/+4
| | | | | | | | | | | | | | | The Cell CPU timebase has an erratum. When reading the entire 64 bits of the timebase with one mftb instruction, there is a handful of cycles window during which one might read a value with the low order 32 bits already reset to 0x00000000 but the high order bits not yet incremeted by one. This fixes it by reading the timebase again until the low order 32 bits is no longer 0. That might introduce occasional latencies if hitting mftb just at the wrong time, but no more than 70ns on a cell blade, and that was considered acceptable. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Support feature fixups in modulesBenjamin Herrenschmidt2006-10-252-19/+69
| | | | | | | | | | | This patch adds support for feature fixups in modules. This involves adding support for R_PPC64_REL64 relocs to the 64 bits module loader. It also modifies modpost.c to ignore the powerpc fixup sections (or it would warn when used in .init.text). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Support feature fixups in vdso'sBenjamin Herrenschmidt2006-10-256-9/+73
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch reworks the feature fixup mecanism so vdso's can be fixed up. The main issue was that the construct: .long label (or .llong on 64 bits) will not work in the case of a shared library like the vdso. It will generate an empty placeholder in the fixup table along with a reloc, which is not something we can deal with in the vdso. The idea here (thanks Alan Modra !) is to instead use something like: 1: .long label - 1b That is, the feature fixup tables no longer contain addresses of bits of code to patch, but offsets of such code from the fixup table entry itself. That is properly resolved by ld when building the .so's. I've modified the fixup mecanism generically to use that method for the rest of the kernel as well. Another trick is that the 32 bits vDSO included in the 64 bits kernel need to have a table in the 64 bits format. However, gas does not support 32 bits code with a statement of the form: .llong label - 1b (Or even just .llong label) That is, it cannot emit the right fixup/relocation for the linker to use to assign a 32 bits address to an .llong field. Thus, in the specific case of the 32 bits vdso built as part of the 64 bits kernel, we are using a modified macro that generates: .long 0xffffffff .llong label - 1b Note that is assumes that the value is negative which is enforced by the .lds (those offsets are always negative as the .text is always before the fixup table and gas doesn't support emiting the reloc the other way around). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Consolidate feature fixup codeBenjamin Herrenschmidt2006-10-257-220/+93
| | | | | | | | | | | | | | | | | There are currently two versions of the functions for applying the feature fixups, one for CPU features and one for firmware features. In addition, they are both in assembly and with separate implementations for 32 and 64 bits. identify_cpu() is also implemented in assembly and separately for 32 and 64 bits. This patch replaces them with a pair of C functions. The call sites are slightly moved on ppc64 as well to be called from C instead of from assembly, though it's a very small change, and thus shouldn't cause any problem. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Fix spelling errors in ucc_fast.c and ucc_slow.cTimur Tabi2006-10-232-2/+2
| | | | | | | In ucc_fast.c and ucc_slow.c, "illegal" is twice spelled "illagal". Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Don't require execute perms on wrapper when building zImage.initrdMark A. Greer2006-10-231-1/+1
| | | | | | | | Don't require that the wrapper script be executable when building zImage.initrds. This has already been fixed for zImages. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Add 970GX cputable entryJake Moilanen2006-10-232-1/+16
| | | | | | | | | | | | 970GX cputable entry from Steve Winiecki. Signed-off-by: Jake Moilanen <moilanen@austin.ibm.com> arch/powerpc/kernel/cputable.c | 15 +++++++++++++++ arch/powerpc/oprofile/op_model_power4.c | 2 +- include/asm-powerpc/reg.h | 1 + 3 files changed, 17 insertions(+), 1 deletion(-) Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Fix build breakage with CONFIG_PPC32Srinivasa Ds2006-10-231-1/+2
| | | | | | | | | | low_cpu_die is called from the CPU hotplug code on 32-bit powermacs, but it is only defined if CONFIG_PM || CONFIG_CPU_FREQ_PMAC. This changes the ifdef so it is defined for CONFIG_HOTPLUG_CPU on 32-bit machines. Signed-off-by: Srinivasa DS <srinivasa@in.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Fix compiler warning message on get_property callZang Roy-r619112006-10-231-2/+2
| | | | | | | | | | | This fixes the warning message from the return value of function get_property(), by making sure that the variable that receives the value is marked as const. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> -- Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Simplify stolen time calculationStephen Rothwell2006-10-231-47/+16
| | | | | | | | | | | | | | | | | | In calculating stolen time, we were trying to actually account for time spent in the hypervisor. We don't really have enough information to do that accurately, so don't try. Instead, we now calculate stolen time as time that the current cpu thread is not actually dispatching instructions. On chips without a PURR, we cannot do this, so stolen time will always be zero. On chips with a PURR, this is merely the difference between the elapsed PURR values and the elapsed TB values. This gives us much more sane vaules from tools such as mpstat, even if they are still a bit strange e.g. 2 busy threads on one cpu will both appear to have 50% user time and 50% stolen time while 1 busy thread on a cpu will look like 100% user on one of them and 100% idle on the other. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] Reintroduce NODES_SPAN_OTHER_NODES for powerpcAndy Whitcroft2006-10-212-0/+10
| | | | | | | | | | | | | | | | | | | | | | | Reintroduce NODES_SPAN_OTHER_NODES for powerpc Revert "[PATCH] Remove SPAN_OTHER_NODES config definition" This reverts commit f62859bb6871c5e4a8e591c60befc8caaf54db8c. Revert "[PATCH] mm: remove arch independent NODES_SPAN_OTHER_NODES" This reverts commit a94b3ab7eab4edcc9b2cb474b188f774c331adf7. Also update the comments to indicate that this is still required and where its used. Signed-off-by: Andy Whitcroft <apw@shadowen.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Kravetz <kravetz@us.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Will Schmidt <will_schmidt@vnet.ibm.com> Cc: Christoph Lameter <clameter@sgi.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [POWERPC] Check for offline nodes in pci NUMA codeAnton Blanchard2006-10-161-2/+8
| | | | | | | | | | | | During boot we bring up all memory and cpu nodes. Normally a PCI device will be in one of these online nodes, however in some weird setups it may not. We have only seen this in the lab but we may as well check for the case and fallback to -1 (all nodes). Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Better check in show_instructionsAnton Blanchard2006-10-161-8/+2
| | | | | | | | | Instead of just checking that an address is in the right range, use the provided __kernel_text_address() helper which covers both the kernel and module text sections. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] POWER6 has 6 PMCsAnton Blanchard2006-10-161-1/+1
| | | | | | | Change ->num_pmcs to match the number of PMCs in POWER6. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Never panic when taking altivec exceptions from userspaceAnton Blanchard2006-10-161-2/+1
| | | | | | | | | | | | At the moment we rely on a cpu feature bit or a firmware property to detect altivec. If we dont have either of these and the cpu does in fact support altivec we can cause a panic from userspace. It seems safer to always send a signal if we manage to get an 0xf20 exception from userspace. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Fix IO Window Updates on P2P bridges.Randy Vinson2006-10-161-6/+6
| | | | | | | | When update_bridge_base() updates the IO window on a PCI-to-PCI bridge, it fails to zero the upper 16 bits of the base and limit registers if the window size is less than 64K. This fixes it. Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Add Makefile entry for MPC832x_mds supportLi Yang2006-10-161-1/+2
| | | | | | | | Add missing entry in Makefile for MPC832x MDS support. It also change white space to tab in MPC8360 entry. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Fix MPC8360EMDS PB board supportLi Yang2006-10-163-0/+33
| | | | | | | | | | MPC8360EMDS PB support is broken as some code was missing in last submission. This patch adds missing code and makes MPC8360EMDS PB support working. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Add DOS partition table support to mpc834x_itx_defconfigTimur Tabi2006-10-161-1/+1
| | | | | | | | | | | The default configuration file for the MPC8349E-mITX reference board, mpc834x_itx_defconfig, did not include support for DOS partition table types. This support is necessary because the hard drive that comes with the ITX is formatted with this partition table type. Without this config option, no partitions on the drive can be mounted. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] spufs: fix support for read/write on cntlNoguchi, Masato2006-10-161-0/+1
| | | | | | | | | This fixes a memory leak introduced by "spufs: add support for read/write oncntl", which was missing a call to simple_attr_close. Signed-off-by: Masato Noguchi <Masato.Noguchi@jp.sony.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Don't crash on cell with 2 BEs when !CONFIG_NUMABenjamin Herrenschmidt2006-10-161-4/+11
| | | | | | | | | The SPU code will crash if CONFIG_NUMA is not set and SPUs are found on a non-0 node. This workaround will ignore those SPEs and just print an message in the kernel log. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] mm: use symbolic names instead of indices for zone initialisationMel Gorman2006-10-112-6/+7
| | | | | | | | | | | | | | | | | | | | | | | Arch-independent zone-sizing is using indices instead of symbolic names to offset within an array related to zones (max_zone_pfns). The unintended impact is that ZONE_DMA and ZONE_NORMAL is initialised on powerpc instead of ZONE_DMA and ZONE_HIGHMEM when CONFIG_HIGHMEM is set. As a result, the the machine fails to boot but will boot with CONFIG_HIGHMEM turned off. The following patch properly initialises the max_zone_pfns[] array and uses symbolic names instead of indices in each architecture using arch-independent zone-sizing. Two users have successfully booted their powerpcs with it (one an ibook G4). It has also been boot tested on x86, x86_64, ppc64 and ia64. Please merge for 2.6.19-rc2. Credit to Benjamin Herrenschmidt for identifying the bug and rolling the first fix. Additional credit to Johannes Berg and Andreas Schwab for reporting the problem and testing on powerpc. Signed-off-by: Mel Gorman <mel@csn.ul.ie> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge branch 'merge' of ↵Linus Torvalds2006-10-105-31/+241
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Fix windfarm platform device usage [POWERPC] Fix i2c-powermac platform device usage [POWERPC] Fix secondary CPU startup on old "powersurge" SMP powermacs [POWERPC] ARCH=ppc pt_regs fixes [POWERPC] Update maple defconfig [POWERPC] Fix Maple secondary IDE interrupt [POWERPC] Make U4 PCIe work on maple [POWERPC] cell: fix default zImage build target [POWERPC] Fix boot wrapper invocation if CROSS_COMPILE contains spaces [POWERPC] Fix xmon IRQ handler for pt_regs removal
| * [POWERPC] Fix secondary CPU startup on old "powersurge" SMP powermacsPaul Mackerras2006-10-101-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On the old "powersurge" SMP powermacs, the second CPU is started up by sending it an IPI, which has the side effect of stopping the timebase clock (so the secondary CPU's timebase can be synchronized with the primary's). The routine that did this used udelay, which will hang forever when the timebase is stopped, since udelay now spins until the timebase reaches a certain value. The end result is that the kernel would hang when bringing up the second CPU. This fixes it by using a simple loop which just does a fixed number of iterations to generate the delay. These old systems were all clocked at around 200 MHz or so, so a fixed number of iterations is acceptable. Signed-off-by: Paul Mackerras <paulus@samba.org>
| * [POWERPC] Update maple defconfigBenjamin Herrenschmidt2006-10-101-13/+43
| | | | | | | | | | | | | | | | This updates the Maple defconfig to 4 CPUs (along with current defaults) to support the "tigerwood" 970MP evaluation board. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * [POWERPC] Fix Maple secondary IDE interruptBenjamin Herrenschmidt2006-10-101-2/+15
| | | | | | | | | | | | | | | | | | | | | | | | The IDE driver will pick up the PCI IRQ for both channels on Maple despite the fact that it's in legacy mode. This works around it by "hiding" the PCI IRQ of the AMD8111 IDE controller when it's configured in legacy mode on the Maple platform, thus causing the driver to call pci_get_legacy_ide_irq() which will return the correct interrupts for both channels. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * [POWERPC] Make U4 PCIe work on mapleBenjamin Herrenschmidt2006-10-101-7/+169
| | | | | | | | | | | | | | | | | | The Maple support code was missing code for U4/CPC945 PCIe. This adds it, enabling it to work on tigerwood boards, and possibly also js21 using SLOF. Also disable an obsolete firmware workaround. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * [POWERPC] cell: fix default zImage build targetGeoff Levand2006-10-101-6/+6
| | | | | | | | | | | | | | | | | | | | | | Change CONFIG_PPC_CELL to CONFIG_PPC_IBM_CELL_BLADE in the powerpc boot makefile. CONFIG_PPC_CELL is used to build the generic cell processor support, and is not an indication of platform. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * [POWERPC] Fix boot wrapper invocation if CROSS_COMPILE contains spacesMichael Ellerman2006-10-101-2/+2
| | | | | | | | | | | | | | | | | | My CROSS_COMPILE is "ccache /opt/compilers/blah", which confuses the boot wrapper script. Quote CROSS_COMPILE and CROSS32_COMPILE so they can safely contain spaces. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * [POWERPC] Fix xmon IRQ handler for pt_regs removalPaul Mackerras2006-10-101-3/+3
| | | | | | Signed-off-by: Paul Mackerras <paulus@samba.org>
* | [HEADERS] Put linux/config.h out of its misery.Dave Jones2006-10-094-6/+0
|/ | | | Signed-off-by: Dave Jones <davej@redhat.com>
* Merge git://git.infradead.org/~dhowells/irq-2.6Linus Torvalds2006-10-091-1/+1
|\ | | | | | | | | * git://git.infradead.org/~dhowells/irq-2.6: IRQ: Use the new typedef for interrupt handler function pointers
| * IRQ: Use the new typedef for interrupt handler function pointersDavid Howells2006-10-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the new typedef for interrupt handler function pointers rather than actually spelling out the full thing each time. This was scripted with the following small shell script: #!/bin/sh egrep -nHrl -e 'irqreturn_t[ ]*[(][*]' $* | while read i do echo $i perl -pi -e 's/irqreturn_t\s*[(]\s*[*]\s*([_a-zA-Z0-9]*)\s*[)]\s*[(]\s*int\s*,\s*void\s*[*]\s*[)]/irq_handler_t \1/g' $i || exit $? done Signed-Off-By: David Howells <dhowells@redhat.com>
* | [PATCH] trivial iomem annotations (arch/powerpc/platfroms/parsemi/pci.c)Al Viro2006-10-091-13/+13
| | | | | | | | | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] extern doesn't make sense on a definition of function...Al Viro2006-10-091-2/+2
|/ | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Revert "[POWERPC] Don't get PCI IRQ from OF for devices with no IRQ"Linus Torvalds2006-10-081-11/+6
| | | | | | | | | | | This reverts commit 41550c5128150175197257b6ceab2cd50dea7b51. Quoth Ben Herrenschmidt: "Please revert this one for now. It seems to break G5s :( Looks like PCI cells inside Apple IO ASICs don't have a PCI_INTERRUPT_LINE set. I need to figure out a better fix." Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [POWERPC] SPU fixup after irq changesOlaf Hering2006-10-071-3/+3
| | | | | | | Remove struct pt_regs * from remaining spu irq functions. Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Fix up after irq changesOlaf Hering2006-10-0727-68/+60
| | | | | | | | | Remove struct pt_regs * from all handlers. Also remove the regs argument from get_irq() functions. Compile tested with arch/powerpc/config/* and arch/ppc/configs/prep_defconfig Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Fix iseries/smp.c for irq breakageStephen Rothwell2006-10-073-7/+12
| | | | | Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Update iseries_defconfigStephen Rothwell2006-10-071-17/+69
| | | | | | | | This make sure that an iseries_defconfig does not inlude other platforms. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Fix fsl_soc build breaksOlof Johansson2006-10-071-4/+5
| | | | | | | | | | | | | | | | | | | | | | | Hrm, there's no way this ever built at time of merge. There's a missing } and the wrong type on phy_irq. Also, another const for get_property(). CC arch/powerpc/sysdev/fsl_soc.o arch/powerpc/sysdev/fsl_soc.c: In function 'fs_enet_of_init': arch/powerpc/sysdev/fsl_soc.c:625: error: assignment of read-only variable 'phy_irq' arch/powerpc/sysdev/fsl_soc.c:625: warning: assignment makes integer from pointer without a cast arch/powerpc/sysdev/fsl_soc.c:661: warning: assignment discards qualifiers from pointer target type arch/powerpc/sysdev/fsl_soc.c:684: error: subscripted value is neither array nor pointer arch/powerpc/sysdev/fsl_soc.c:687: error: subscripted value is neither array nor pointer arch/powerpc/sysdev/fsl_soc.c:722: warning: ISO C90 forbids mixed declarations and code arch/powerpc/sysdev/fsl_soc.c:728: error: invalid storage class for function 'cpm_uart_of_init' arch/powerpc/sysdev/fsl_soc.c:798: error: initializer element is not constant arch/powerpc/sysdev/fsl_soc.c:798: error: expected declaration or statement at end of input make[1]: *** [arch/powerpc/sysdev/fsl_soc.o] Error 1 Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Minor fix for bootargs propertyGeoff Levand2006-10-061-1/+1
| | | | | | | | | | | | | | | | Avoid the use of an uninitialized stack variable when the powerpc device tree bootargs property is either missing or incorrectly defined. This also makes CONFIG_CMDLINE work properly under these conditions. This change adds a test for the existence of the bootargs property. early_init_dt_scan_chosen() tests for a zero length bootargs property in its CONFIG_CMDLINE processing, but the current implementation of of_get_flat_dt_prop() doesn't assign a value to the length when no property is found. Since an automatic variable is used, a stale value from the stack will be used in the test. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
OpenPOWER on IntegriCloud