summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/kernel
Commit message (Collapse)AuthorAgeFilesLines
* [POWERPC] Merge CPU features pertaining to icache coherencyDavid Gibson2007-06-142-12/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the powerpc kernel has a 64-bit only feature, COHERENT_ICACHE used for those CPUS which maintain icache/dcache coherency in hardware (POWER5, essentially). It also has a feature, SPLIT_ID_CACHE, which is used on CPUs which have separate i and d-caches, which is to say everything except 601 and Freescale E200. In nearly all the places we check the SPLIT_ID_CACHE, what we actually care about is whether the i and d-caches are coherent (which they will be, trivially, if they're the same cache). This tries to clarify the situation a little. The COHERENT_ICACHE feature becomes availble on 32-bit and is set for all CPUs where i and d-cache are effectively coherent, whether this is due to special logic (POWER5) or because they're unified. We check this, instead of SPLIT_ID_CACHE nearly everywhere. The SPLIT_ID_CACHE feature itself is replaced by a UNIFIED_ID_CACHE feature with reversed sense, set only on 601 and Freescale E200. In the two places (one Freescale BookE specific) where we really care whether it's a unified cache, not whether they're coherent, we check this feature. The CPUs with unified cache are so few, we could consider replacing this feature bit with explicit checks against the PVR. This will make unifying the 32-bit and 64-bit cache flush code a little more straightforward. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Remove the dregs of APUS support from arch/powerpcDavid Gibson2007-06-142-120/+3
| | | | | | | | | | | | | APUS (the Amiga Power-Up System) is not supported under arch/powerpc and it's unlikely it ever will be. Therefore, this patch removes the fragments of APUS support code from arch/powerpc which have been copied from arch/ppc. A few APUS references are left in asm-powerpc in .h files which are still used from arch/ppc. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Donate idle CPU cycles on dedicated partitionsJake Moilanen2007-06-141-1/+3
| | | | | | | | | | | | | | | | | | | | | A Power6 can give up CPU cycles on a dedicated CPU (as opposed to a shared CPU) to other shared processors if the administrator asks for it (via the HMC). This enables that to work properly on P6. This just involves setting a bit in the CAS structure as well as the VPA. To donate cycles, a CPU has to have all SMT threads idle and have the donate bit set in the VPA. Then call H_CEDE. The reason why shared processors just aren't used is because dedicated CPUs are guaranteed an actual processor, yet the system is still able to increase the capacity of the shared CPU pool. Also rename the VPA's cpuctls_task_attrs field to a more accurate name. Signed-off-by: Jake Moilanen <moilanen@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Less ifdef's in signal.c/signal.hBenjamin Herrenschmidt2007-06-142-15/+24
| | | | | | | | | This patch moves things around a little bit in the new common signal.c and signal.h files to remove the last #ifdef in the middle of the common do_signal(). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Remove #ifdef around set_dabr in signal codeBenjamin Herrenschmidt2007-06-141-2/+0
| | | | | | | | | | set_dabr() and thread.dabr exist on 32 bits as well nowadays (they actually may do something even, depending on what CPU you have). So this removes the ifdef. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Merge creation of signal frameBenjamin Herrenschmidt2007-06-144-62/+59
| | | | | | | | | | | | | | | The code for creating signal frames was still duplicated and split in strange ways between 32 and 64 bits, including the SA_ONSTACK handling being in do_signal on 32 bits but inside handle_rt_signal on 64 bits etc... This moves the 64 bits get_sigframe() to the generic signal.c, cleans it a bit, moves the access_ok() call done by all callers to it as well, and adapts/cleanups the 3 different signal handling cases to use that common function. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Remove obsolete freezer bitsBenjamin Herrenschmidt2007-06-141-12/+0
| | | | | | | | The powerpc signal code still had some obsolete freezer bits that have long been removed from x86 (it's now done in generic code). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Consolidate do_signalChristoph Hellwig2007-06-144-175/+120
| | | | | | | | | | | | | do_signal has exactly the same behaviour on 32bit and 64bit and 32bit compat on 64bit for handling 32bit signals. Consolidate all these into one common function in signal.c. The only odd left over is the try_to_free in the 32bit version that no other architecture has in mainline (only in i386 for some odd SuSE release). We should probably get rid of it in a separate patch. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Consolidate restore_sigmaskChristoph Hellwig2007-06-144-34/+18
| | | | | | | | | | restore_sigmask is exactly the same on 32 and 64bit, so move it to common code. Also move _BLOCKABLE to signal.h to avoid defining it multiple times. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Consolidate sys_sigaltstackChristoph Hellwig2007-06-143-16/+7
| | | | | | | | | | | | | sys_sigaltstack is the same on 32bit and 64 and we can consolidate it to signal.c. The only difference is that the 32bit code uses ints for the unused register paramaters and 64bit unsigned long. I've changed it to unsigned long because it's the same width on 32bit. (I also wonder who came up with this awkward calling convention.. :)) Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Make syscall restart code more commonBenjamin Herrenschmidt2007-06-145-77/+94
| | | | | | | | | | | | | | | | | | This patch moves the code in signal_32.c and signal_64.c for handling syscall restart into a common signal.c file and converge around a single implementation that is based on the 32 bits one, using trap, ccr and r3 rather than the special "result" field for deciding what to do. The "result" field is now pretty much deprecated. We still set it for the sake of whatever might rely on it in userland but we no longer use it's content. This, along with a previous patch that enables ptracers to write to "trap" and "orig_r3" should allow gdb to properly handle syscall restarting. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Always apply DABR changes on context switchesBenjamin Herrenschmidt2007-06-141-7/+7
| | | | | | | | | | | | This patch removes the #ifdef CONFIG_PPC64 around setting the DABR. The actual setting of the SPR inside of the set_dabr() function is dependent on CONFIG_PPC64 || CONFIG_6xx but you can always provide a ppc_md hook to override that. We should improve support for different HW breakpoints facilities but this is a first step. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] powerpc: ptrace can set DABR on both 32 and 64 bitsBenjamin Herrenschmidt2007-06-141-4/+0
| | | | | | | | Allow ptrace to set dabr in the thread structure for both 32 and 64 bits, though only 64 bits actually uses that field, it's actually defined in both. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] ptrace shouldn't touch FP exec modeBenjamin Herrenschmidt2007-06-144-94/+39
| | | | | | | | | | | | | | | | One of the gratuitous difference between 32 and 64-bit ptrace is whether you can whack the MSR:FE0 and FE1 bits from ptrace. This patch forbids it unconditionally. In addition, the 64-bit kernels used to return the exception mode in the MSR on reads, but 32-bit kernels didn't. This patch makes it return those bits on both. Finally, since ptrace-ppc32.h and ptrace-ppc64.h are mostly empty now, and since the previous patch made ptrace32.c no longer need the MSR_DEBUGCHANGE definition, we just remove those 2 files and move back the remaining bits to ptrace.c (they were short lived heh ?). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Allow ptrace write to pt_regs trap and orig_r3Benjamin Herrenschmidt2007-06-142-16/+20
| | | | | | | | | | | | | | | | This patch allows a ptracer to write to the "trap" and "orig_r3" words of the pt_regs. This, along with a subsequent patch to the signal restart code, should enable gdb to properly handle syscall restarting after executing a separate function (at least when there's no restart block). This patch also removes ptrace32.c code toying directly with the registers and makes it use the ptrace_get/put_reg() accessors for everything so that the logic for checking what is permitted is in only one place. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Remove some useless ifdef's in ptraceBenjamin Herrenschmidt2007-06-141-4/+0
| | | | | | | | CHECK_FULL_REGS() exist on both 32 and 64 bits, so there's no need to make it conditional on CONFIG_PPC32. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Uninline common ptrace bitsBenjamin Herrenschmidt2007-06-144-254/+232
| | | | | | | | | This folds back the ptrace-common.h bits back into ptrace.c and removes that file. The FSL SPE bits from ptrace-ppc32.h are folded back in as well. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] ptrace updates & new, better requestsBenjamin Herrenschmidt2007-06-143-166/+209
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The powerpc ptrace interface is dodgy at best. We have defined our "own" versions of GETREGS/SETREGS/GETFPREGS/SETFPREGS that strangely take arguments in reverse order from other archs (in addition to having different request numbers) and have subtle issue, like not accessing all of the registers in their respective categories. This patch moves the implementation of those to a separate function in order to facilitate their deprecation in the future, and provides new ptrace requests that mirror the x86 and sparc ones and use the same numbers: PTRACE_GETREGS : returns an entire pt_regs (the whole thing, not only the 32 GPRs, though that doesn't include the FPRs etc... There's a compat version for 32 bits that returns a 32 bits compatible pt_regs (44 uints) PTRACE_SETREGS : sets an entire pt_regs (the whole thing, not only the 32 GPRs, though that doesn't include the FPRs etc... Some registers cannot be written to and will just be dropped, this is the same as with POKEUSR, that is anything above MQ on 32 bits and CCR on 64 bits. There is a compat version as well. PTRACE_GETFPREGS : returns all the FP registers -including- the FPSCR that is 33 doubles (regardless of 32/64 bits) PTRACE_SETFPREGS : sets all the FP registers -including- the FPSCR that is 33 doubles (regardless of 32/64 bits) And two that only exist on 64 bits kernels: PTRACE_GETREGS64 : Same as PTRACE_GETREGS, except there is no compat function, a 32 bits process will obtain the full 64 bits registers PTRACE_SETREGS64 : Same as PTRACE_SETREGS, except there is no compat function, a 32 bits process will set the full 64 bits registers The two later ones makes things easier to have a 32 bits debugger on a 64 bits program (or on a 32 bits program that uses the full 64 bits of the GPRs, which is possible though has issues that will be fixed in a later patch). Finally, while at it, the patch removes a whole bunch of code duplication between ptrace32.c and ptrace.c, in large part by having the former call into the later for all requests that don't need any special "compat" treatment. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] ptrace cleanupsBenjamin Herrenschmidt2007-06-145-242/+197
| | | | | | | | | | | | | | | The powerpc ptrace code has some weirdness, like a ptrace-common.h file that is actually ppc64 only and some of the 32 bits code ifdef'ed inside ptrace.c. There are also separate implementations for things like get/set_vrregs for 32 and 64 bits which is totally unnecessary. This patch cleans that up a bit by having a ptrace-common.h which contains really common code (and makes a lot more code common), and ptrace-ppc32.h and ptrace-ppc64.h files that contain the few remaining different bits. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Disable broken PPC_PTRACE_GETFPREGS on 32 bitsBenjamin Herrenschmidt2007-06-141-0/+2
| | | | | | | | | | The handling of PPC_PTRACE_GETFPREGS is broken on 32 bits kernel, it will only return half of the registers. Since that call didn't initially exist for 32 bits kernel (added recently), rather than fixing it, let's just remove it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Rewrite IO allocation & mapping on powerpc64Benjamin Herrenschmidt2007-06-145-246/+400
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Fix VDSO compile warningSegher Boessenkool2007-06-141-1/+1
| | | | | | | | Maybe the type should have been char[] instead of __u8[] in the first place, but this will do. Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Fix console output getting dropped on platforms without udbg_putcMilton Miller2007-06-141-1/+7
| | | | | | | | | | | | | | | | | | Previously, registering this early console would just result in dropping early buffered printk output until a udbg_putc was registered. However, commit 69331af79cf29e26d1231152a172a1a10c2df511 clears the CON_PRINTBUFFER flag on the main console when a CON_BOOT (early) console has been registered, resulting in the buffered messages never being displayed to the user. This fixes the problem by making sure we don't register udbg_console on platforms that don't implement udbg_putc. Signed-off-by: Milton Miller <miltonm@bga.com> Acked-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Fix pci_setup_phb_io_dynamic for pci_iomapArnd Bergmann2007-06-071-1/+1
| | | | | | | | | | | | | We had a problem on a system with only dynamically allocated PCI buses (using of_pci_phb_driver) in combination with libata. This setup ended up having no "primary" phb, which means that pci_io_base never got initialized and all IO port numbers are 64 bit numbers, which is larger than the PIO_MASK limit. Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Compare irq numbers with NO_IRQ not IRQ_NONEMichael Ellerman2007-06-021-3/+3
| | | | | | | | | | | | | There is a thinko in the irq code, it uses IRQ_NONE to indicate no irq, whereas it should be using NO_IRQ. IRQ_NONE is returned from irq handlers to say "not handled". As it happens they currently have the same value (0), so this is just for future proof-ness. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Fix ppc32 single-stepping out of syscallsBenjamin Herrenschmidt2007-06-021-0/+2
| | | | | | | | | | | | | The ppc32 kernel didn't properly set/clear the TIF_SINGLESTEP flag, causing return from syscalls to not SIGTRAP, thus executing one more instruction before stopping again. This fixes it. The ptrace code is a bit of a mess, and is overdue for at least a -proper- 32/64 bits split and possibly more cleanups but this minimum fix should be ok for 2.6.22 Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Update documentation for of_find_node_by_type()Michael Ellerman2007-06-021-5/+6
| | | | | | | | | | The documentation for of_find_node_by_type() incorrectly refers to the "name" parameter - it should be "type". Also the behaviour when from == NULL is not really documented, fix that. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Fix powerpc vmlinux.lds.SBenjamin Herrenschmidt2007-05-221-1/+0
| | | | | | | | | | | | | | | Sam's recent change in 7664709b44a13e2e0b545e2dd8e7b8797a1748dc broke things for us because we ended up with *(.text.*) before *(.text), whereas previously *(.text) was first. This was important because the start of the text section contains the kernel entry point. In fact, we don't need that *(.text.*) thing anymore and it incorrectly matched .text.init.refok, thus putting it before .text. .. ouch ! Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Fix typo: MMCR0_PMA0 != MMCR0_PMAOAnton Blanchard2007-05-221-3/+3
| | | | | | | | | | | | | | | | | pmc.c has: #ifndef MMCR0_PMA0 #define MMCR0_PMA0 0 This one took a while to find. Unfortunately its the wrong define (number 0 vs letter O). Its probably worth removing this override, since if our includes get screwed up we will have the same (hard to debug) failure. Fix it simply for now, so that we can backport to stable. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Add missing pmc_type fields in cpu_tableAnton Blanchard2007-05-221-0/+4
| | | | | | | | | A number of cpu_table entries were missing the pmc_type field, which means that the sysfs entries for the performance monitor counters don't get created. This adds them. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Fix smp_call_function to be preempt-safeHugh Dickins2007-05-221-16/+18
| | | | | | | | | | | | smp_call_function_map() was not safe against preemption to another cpu: its test for removing self from map was outside the spinlock. Rearrange it a little to fix that. smp_call_function_single() was also wrong: now get_cpu() before excluding self, as other architectures do. Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* all-archs: consolidate .data section definition in asm-genericSam Ravnborg2007-05-191-1/+1
| | | | | | | With this consolidation we can now modify the .data section definition in one spot for all archs. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
* all-archs: consolidate .text section definition in asm-genericSam Ravnborg2007-05-191-1/+2
| | | | | | Move definition of .text section to asm-generic. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
* [POWERPC] Fix ppc_rtas_progress_show()Segher Boessenkool2007-05-171-1/+1
| | | | | | | | | | | | | Fixes the warning arch/powerpc/kernel/rtas-proc.c: In function 'ppc_rtas_progress_show': arch/powerpc/kernel/rtas-proc.c:382: warning: the address of 'progress_led' will always evaluate as 'true' by fixing the code to do what it presumably is meant to do. Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Make sure device node type/name is not NULL on hot-added nodesBenjamin Herrenschmidt2007-05-171-0/+5
| | | | | | | | | | | Our device-tree unflattening code makes sure the name and type fields of a device-node are not NULL. However, the code for dynamically adding devices nodes which is used for pSeries hotplug for example didn't do it, potentially causing crashes in some code that assume it can always do things like strcmp on those. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Fix IO space on PCI buses created from of_platformBenjamin Herrenschmidt2007-05-172-5/+28
| | | | | | | | | | | | | | | | This changes the way of_platform_pci creates PCI host bridges such that it uses request_phb_iospace() for mapping the IO ports, instead of using the dynamic hotplug stuff. That guarantees the IO space stays within the 2GB limit and thus doesn't break half of the legacy drivers around. Fixes a couple of warnings due to missing IO space while at it. This patch is a temporary workaround for 2.6.22 before a more complete rewrite of IO mappings is merged in 2.6.23 Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Fix COMMON symbol warningsKumar Gala2007-05-171-3/+15
| | | | | | | | | | | | | | | | | We get the following warnings in various ARCH=powerpc builds: WARNING: "ee_restarts" [arch/powerpc/kernel/built-in] is COMMON symbol WARNING: "fee_restarts" [arch/powerpc/kernel/built-in] is COMMON symbol WARNING: "htab_hash_searches" [arch/powerpc/mm/built-in] is COMMON symbol WARNING: "next_slot" [arch/powerpc/mm/built-in] is COMMON symbol WARNING: "mmu_hash_lock" [arch/powerpc/mm/built-in] is COMMON symbol WARNING: "primary_pteg_full" [arch/powerpc/mm/built-in] is COMMON symbol WARNING: "global_dbcr0" [arch/powerpc/kernel/built-in] is COMMON symbol Switch to moving local symbols (except mmu_hash_lock which is global) and space directive instead. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] Remove CPU_FTR_NEED_COHERENT for 7448.James.Yang2007-05-171-1/+1
| | | | | | | | | Remove CPU_FTR_NEED_COHERENT for MPC7448 (and single-core MPC86xx). This prevents needlessly setting M=1 when not SMP. Signed-off-by: James.Yang <James.Yang@freescale.com> Acked-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] Check cache coherency of kernel vs firmwareDale Farnsworth2007-05-121-0/+41
| | | | | | | | | check_cache_coherency() verifies that the cache coherency setting of the kernel (CONFIG_NOT_COHERENT_CACHE) matches that left by the firmware, as indicated by coherency-off device tree property. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Don't complain if size-cells == 0 in prom_parse()Kim Phillips2007-05-121-1/+1
| | | | | | | | | | | | | An mdio bus scan was added with ucc_geth phylib migration patches, now machines complain on boot, saying: prom_parse: Bad cell count for /qe@e0100000/mdio@2120/ethernet-phy@00 prom_parse: Bad cell count for /qe@e0100000/mdio@2120/ethernet-phy@01 since size-cells can indeed be 0, this patch fixes the check. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Simplify smp_space_timerswill schmidt2007-05-121-17/+2
| | | | | | | | | | | | | | | | | | | Greatly simplify the function smp_space_timers. The stolen time calculation (per comment within the code) doesn't need the half-jiffy stagger any more. There isn't an issue with bouncing off global locks, so we really shouldn't need any sort of staggering at all. However, the last_jiffy value still needs to be set. This removes the extra stagger logic, and just sets the values. This change should benefit applications that rely on barrier synchronization, and will help cut down OS jitter. Boot tested across the board (G5,power3,power4,power5,970mp blade). Signed-off-by: Will Schmidt <will_schmidt@vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* Merge branch 'audit.b38' of ↵Linus Torvalds2007-05-112-0/+22
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current * 'audit.b38' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current: [PATCH] Abnormal End of Processes [PATCH] match audit name data [PATCH] complete message queue auditing [PATCH] audit inode for all xattr syscalls [PATCH] initialize name osid [PATCH] audit signal recipients [PATCH] add SIGNAL syscall class (v3) [PATCH] auditing ptrace
| * [PATCH] audit signal recipientsAmy Griffis2007-05-111-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | When auditing syscalls that send signals, log the pid and security context for each target process. Optimize the data collection by adding a counter for signal-related rules, and avoiding allocating an aux struct unless we have more than one target process. For process groups, collect pid/context data in blocks of 16. Move the audit_signal_info() hook up in check_kill_permission() so we audit attempts where permission is denied. Signed-off-by: Amy Griffis <amy.griffis@hp.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| * [PATCH] add SIGNAL syscall class (v3)Amy Griffis2007-05-112-0/+13
| | | | | | | | | | | | | | Add a syscall class for sending signals. Signed-off-by: Amy Griffis <amy.griffis@hp.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* | powerpc: fixup hard_irq_disable semanticsBenjamin Herrenschmidt2007-05-112-5/+1
|/ | | | | | | | | | | | | | | | | | | | This patch renames the raw hard_irq_{enable,disable} into __hard_irq_{enable,disable} and introduces a higher level hard_irq_disable() function that can be used by any code to enforce that IRQs are fully disabled, not only lazy disabled. The difference with the __ versions is that it will update some per-processor fields so that the kernel keeps track and properly re-enables them in the next local_irq_disable(); This prepares powerpc for my next patch that introduces hard_irq_disable() generically. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [POWERPC] Split initrd logic out of early_init_dt_scan_chosen() to fix warningMichael Ellerman2007-05-101-16/+31
| | | | | | | | | | | | | If CONFIG_BLK_DEV_INITRD is not defined the prop variable in early_init_dt_scan_chosen() is unused, causing a compiler warning. So split the initrd logic into a separate function, allowing us to declare prop only when we need it. Built for both cases and booted with an initrd. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Fix incorrect calculation of I/O window addressesPaul Mackerras2007-05-101-24/+13
| | | | | | | | | | | | My patch "Cope with PCI host bridge I/O window not starting at 0" introduced a bug in the calculation of the virtual addresses for the I/O windows of PCI host bridges other than the first, because it didn't account for the fact that hose->io_resource gets offset so that it reflects the range of global I/O port numbers assigned to the bridge. This fixes it and simplifies get_bus_io_range() in the process. Signed-off-by: Paul Mackerras <paulus@samba.org>
* Merge branch 'master' of ↵Linus Torvalds2007-05-092-6/+13
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Further fixes for the removal of 4level-fixup hack from ppc32 [POWERPC] EEH: log all PCI-X and PCI-E AER registers [POWERPC] EEH: capture and log pci state on error [POWERPC] EEH: Split up long error msg [POWERPC] EEH: log error only after driver notification. [POWERPC] fsl_soc: Make mac_addr const in fs_enet_of_init(). [POWERPC] Don't use SLAB/SLUB for PTE pages [POWERPC] Spufs support for 64K LS mappings on 4K kernels [POWERPC] Add ability to 4K kernel to hash in 64K pages [POWERPC] Introduce address space "slices" [POWERPC] Small fixes & cleanups in segment page size demotion [POWERPC] iSeries: Make HVC_ISERIES the default [POWERPC] iSeries: suppress build warning in lparmap.c [POWERPC] Mark pages that don't exist as nosave [POWERPC] swsusp: Introduce register_nosave_region_late
| * [POWERPC] Introduce address space "slices"Benjamin Herrenschmidt2007-05-091-5/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The basic issue is to be able to do what hugetlbfs does but with different page sizes for some other special filesystems; more specifically, my need is: - Huge pages - SPE local store mappings using 64K pages on a 4K base page size kernel on Cell - Some special 4K segments in 64K-page kernels for mapping a dodgy type of powerpc-specific infiniband hardware that requires 4K MMU mappings for various reasons I won't explain here. The main issues are: - To maintain/keep track of the page size per "segment" (as we can only have one page size per segment on powerpc, which are 256MB divisions of the address space). - To make sure special mappings stay within their allotted "segments" (including MAP_FIXED crap) - To make sure everybody else doesn't mmap/brk/grow_stack into a "segment" that is used for a special mapping Some of the necessary mechanisms to handle that were present in the hugetlbfs code, but mostly in ways not suitable for anything else. The patch relies on some changes to the generic get_unmapped_area() that just got merged. It still hijacks hugetlb callbacks here or there as the generic code hasn't been entirely cleaned up yet but that shouldn't be a problem. So what is a slice ? Well, I re-used the mechanism used formerly by our hugetlbfs implementation which divides the address space in "meta-segments" which I called "slices". The division is done using 256MB slices below 4G, and 1T slices above. Thus the address space is divided currently into 16 "low" slices and 16 "high" slices. (Special case: high slice 0 is the area between 4G and 1T). Doing so simplifies significantly the tracking of segments and avoids having to keep track of all the 256MB segments in the address space. While I used the "concepts" of hugetlbfs, I mostly re-implemented everything in a more generic way and "ported" hugetlbfs to it. Slices can have an associated page size, which is encoded in the mmu context and used by the SLB miss handler to set the segment sizes. The hash code currently doesn't care, it has a specific check for hugepages, though I might add a mechanism to provide per-slice hash mapping functions in the future. The slice code provide a pair of "generic" get_unmapped_area() (bottomup and topdown) functions that should work with any slice size. There is some trickiness here so I would appreciate people to have a look at the implementation of these and let me know if I got something wrong. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * [POWERPC] iSeries: suppress build warning in lparmap.cStephen Rothwell2007-05-091-1/+2
| | | | | | | | | | | | | | | | | | | | lparmap.c: Assembler messages: lparmap.c:51: Warning: ignoring changed section attributes for .text Idea from Segher Boessenkool. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
OpenPOWER on IntegriCloud