summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/configs
Commit message (Collapse)AuthorAgeFilesLines
* powerpc/85xx: TQM8548: update defconfigWolfgang Grandegger2009-04-071-116/+48
| | | | | | | | | Enable highmem support for the TQM8548-AG modules and NAND support for the TQM8548-BE modules. Furthermore disable USB, Wireless and IDE support because it's not available on the STK85xx starter kit. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/pseries: Enable relay in pseries_defconfigAnton Blanchard2009-04-071-1/+1
| | | | | | | | Enable relay in pseries config, ppc64_defconfig had it enabled but pseries did not. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* powerpc/85xx: Add support for the "socrates" board (MPC8544).Wolfgang Grandegger2009-03-271-0/+1410
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Supported are Ethernet, serial console, I2C, I2C-based RTC and temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime display controller. The multiplexing of FPGA interrupts onto PowerPC interrupt lines is supported through our own fpga_pic interrupt controller driver. For example the SJA1000 controller is level low sensitive connected to fpga_pic line 2 and is routed to the second (of three) irq lines to the CPU: can@3,100 { compatible = "philips,sja1000"; reg = <3 0x100 0x80>; interrupts = <2 2>; interrupts = <2 8 1>; // number, type, routing interrupt-parent = <&fpga_pic>; }; Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com> Signed-off-by: Yuri Tikhonov <yur@emcraft.com> Signed-off-by: Ilya Yanok <yanok@emcraft.com> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc: Turn on self-tests in ppc64_defconfigMichael Ellerman2009-03-241-3/+3
| | | | | | | | Most of the code enabled by these options is __init, and it's much more useful to actually run the tests. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* Merge commit 'origin/master' into nextBenjamin Herrenschmidt2009-03-245-89/+236
|\
| * powerpc/ps3: ps3_defconfig updatesGeoff Levand2009-03-181-60/+190
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Update ps3_defconfig. Sets these options: CONFIG_PS3_VRAM=m CONFIG_BLK_DEV_DM=m CONFIG_USB_HIDDEV=y CONFIG_EXT4_FS=y Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * Merge commit 'gcl/merge' into mergeBenjamin Herrenschmidt2009-03-112-2/+2
| |\
| | * powerpc/4xx: Enable SERIAL_OF support by default for Virtex platformsGrant Likely2009-02-282-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Virtex FPGA designs have two serial port logic cores to choose from; the simple uartlite, and the full featured uart16550. Both cores are in common use so the defconfig should support both of them. Currently only console on uartlite is supported in the defconfig. This patch adds console support for the 16550 core. The Virtex reference designs do not work without this patch. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| * | powerpc: fix linkstation and storcenter compilation breakageGuennadi Liakhovetski2009-03-092-27/+44
| |/ | | | | | | | | | | | | | | | | | | | | | | | | Defining flash partition table in platform code is deprecated, and due to recent changes linkstation and storcenter do not compile any more with their default configurations because of undefined references to physmap_set_partitions(). Instead of fixing them by using the correct kernel configuration macro in preprocessor conditional, remove partition table definitions altogether. Instead add support for partition definition on the command-line and in device tree to the default configurations. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | powerpc/86xx: Default configuration for GE Fanuc's PPC9AMartyn Welch2009-03-191-0/+1889
| | | | | | | | | | | | | | | | | | | | | | Support for the PPC9A VME Single Board Computer from GE Fanuc (PowerPC MPC8641D). This is the default config file for GE Fanuc's PPC9A, a 6U single board computer, based on Freescale's MPC8641D. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | Merge commit 'gcl/next' into nextBenjamin Herrenschmidt2009-03-111-8/+63
|\ \
| * | powerpc/5200: Add digsy-mtc support to mpc5200_defconfigGrzegorz Bernacki2009-02-261-8/+63
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following options are enabled to support the digsy-mtc. - LXT phy - AT24 eeprom - RTC (DS1337) - MTD partitioning based on OF description Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* | | Merge commit 'jwb/next' into nextBenjamin Herrenschmidt2009-03-032-10/+1432
|\ \ \
| * | | AMCC PPC 460SX redwood SoC platform initial frameworkMadhulika Madishetty2009-02-141-0/+1176
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch contains initial framework for the AMCC Redwood board. Signed-off-by: Madhulika Madishetty <mmadishetty@amcc.com> Signed-off-by: Tirumala Marri <tmarri@amcc.com> Signed-off-by: Feng Kan <fkan@amcc.com> Signed-off-by: Vidhyananth Venkatasamy <vvenkatasamy@amcc.com> Signed-off-by: Preetesh Parekh <pparekh@amcc.com> Acked-by: Loc Ho <lho@amcc.com> Acked-by: Feng Kan <fkan@amcc.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
| * | | powerpc/4xx: Add missing USB and i2c devices to CanyonlandsBenjamin Herrenschmidt2009-02-141-10/+256
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds the device-tree entries for a handful of devices on the Canyonlands board, such as the EHCI and OHCI controllers, the real time clock and the AD7414 thermal monitor. I also updated the defconfig to enable various options related to these devices. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
* | | | powerpc/amigaone: Default config for AmigaOne boardsGerhard Pircher2009-02-111-0/+1636
|/ / / | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_CC_OPTIMIZE_FOR_SIZE is selected, because otherwise the kernel wouldn't boot. The AmigaOne's U-boot firmware seems to have a problem loading uImages bigger than 1.8 MB. Signed-off-by: Gerhard Pircher <gerhard_pircher@gmx.net> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* | | Merge commit 'kumar/next' into nextBenjamin Herrenschmidt2009-02-111-0/+1613
|\ \ \ | |_|/ |/| |
| * | powerpc/86xx: Extend GE Fanuc GPIO driver for the SBC310Martyn Welch2009-01-281-2/+2
| | | | | | | | | | | | | | | | | | | | | This patch adds basic support for the 6 GPIO lines found on GE Fanucs SBC310 to the GE Fanuc GPIO driver. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | powerpc/86xx: Default configutation for GE Fanuc's SBC310Martyn Welch2009-01-281-0/+1613
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Support for the SBC310 VPX Single Board Computer from GE Fanuc (PowerPC MPC8641D). This is the default config file for GE Fanuc's SBC310, a 3U single board computer, based on Freescale's MPC8641D. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | | powerpc/83xx: Fix TSEC0 workability on MPC8313E-RDB boardsAnton Vorontsov2009-02-061-1/+1
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | TSEC0 is connected to Vitesse 7385 5-port switch. The switch isn't connected to any mdio bus, the link to the switch is fixed to Full-duplex 1000 Mb/s (no pause). This patch fixes following failure during bootup: mdio@24520:01 not found eth0: Could not attach to PHY IP-Config: Failed to open eth0 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | powerpc/5200: update defconfigsGrant Likely2009-01-296-143/+386
|/ | | | Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* Merge commit 'jwb/jwb-merge' into mergeBenjamin Herrenschmidt2009-01-2820-409/+1150
|\ | | | | | | | | Manual merge of: arch/powerpc/configs/44x/warp_defconfig
| * powerpc/4xx: Update multi-board PowerPC 4xx defconfigsJosh Boyer2009-01-232-37/+119
| | | | | | | | | | | | Update the multi-board configs for 2.6.29-rc2 Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
| * powerpc/44x: Update PowerPC 44x defconfigsJosh Boyer2009-01-2311-234/+641
| | | | | | | | | | | | Update the 44x defconfigs for 2.6.29-rc2 Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
| * powerpc/40x: Update PowerPC 40x defconfigsJosh Boyer2009-01-207-139/+391
| | | | | | | | | | | | Update the 40x defconfigs for 2.6.29-rc2 Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
* | Merge commit 'kumar/kumar-merge' into mergeBenjamin Herrenschmidt2009-01-2850-1303/+3117
|\ \
| * | powerpc/embedded6xx: Update defconfigsKumar Gala2009-01-269-246/+549
| | | | | | | | | | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | powerpc/8xx: Update defconfigsKumar Gala2009-01-265-109/+213
| | | | | | | | | | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | powerpc/86xx: Update defconfigsKumar Gala2009-01-265-146/+429
| | | | | | | | | | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | powerpc/83xx: Update defconfigsKumar Gala2009-01-2614-395/+895
| | | | | | | | | | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | powerpc/85xx: Update defconfigsKumar Gala2009-01-2617-407/+1031
| |/ | | | | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | eeprom: More consistent symbol namesJean Delvare2009-01-2654-111/+111
|/ | | | | | | | | | | | Now that all EEPROM drivers live in the same place, let's harmonize their symbol names. Also fix eeprom's dependencies, it definitely needs sysfs, and is no longer experimental after many years in the kernel tree. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Cc: David Brownell <dbrownell@users.sourceforge.net>
* powerpc: Enable PS3 options and QPACE in ppc64_defconfigMichael Ellerman2009-01-131-1/+25
| | | | | | | To increase the amount of code that's built for a defconfig build. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* [WATCHDOG] Enable watchdog timer on GE Fanuc's SBC610Martyn Welch2009-01-121-0/+1
| | | | | | | | | | | | | | | | Support for the FPGA based watchdog timer on GE Fanuc's SBC610. This patch enables one of the watchdog timers found on the SBC610. There are two identical watchdog timers at different offsets in the above mentioned boards, however the current driver is only capable of supporting one of them. The watchdog timers are also capable of generating interrupts at a user-configurable threshold, though support for this operation is currently not supported by the driver. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* powerpc/85xx: Add SMP support to MPC8572 DSKumar Gala2008-12-301-15/+28
| | | | | | Enable SMP support on the MPC8572 DS reference board. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Merge branch 'next' of ↵Paul Mackerras2008-12-171-6/+6
|\ | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx into next
| * powerpc/44x: update ppc44x_defconfigStephen Rothwell2008-12-041-3/+3
| | | | | | | | | | | | | | | | This removes CONFIG_PCI_LEGACY (which is not needed) and consequently several compiler warnings. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
| * powerpc/kvm: update KVM config options in ppc44x_defconfigHollis Blanchard2008-12-041-3/+3
| | | | | | | | | | | | | | | | | | | | | | KVM host support was recently enabled in ppc44x_defconfig, but since then the config option was renamed. Update ppc44x_defconfig to match. Also, KVM guests aren't very interesting without networking, so enable CONFIG_TUN and CONFIG_BRIDGE. Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
* | Merge branch 'merge' into nextPaul Mackerras2008-12-162-2/+2
|\ \ | |/ |/|
| * powerpc/83xx: Enable FIXED_PHY in mpc834x_itx and mpc83xx defconfigsAnton Vorontsov2008-12-042-2/+2
| | | | | | | | | | | | | | | | | | This is needed so that Vitesse 7385 5-port switch could work on MPC8349E-mITX boards. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | powerpc/86xx: Add use of Epson RTX-8581 RTC to GE Fanuc SBC610 dtsMartyn Welch2008-12-031-2/+6
|/ | | | | | | | Adding use of newly added Epson RTX-8581 real-time clock driver to GE Fanuc SBC610's dts file and adding driver to default config. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Merge branch 'merge' of git://git.secretlab.ca/git/linux-2.6-mpc52xx into mergePaul Mackerras2008-11-2410-486/+2586
|\
| * powerpc/virtex: Update defconfigsGrant Likely2008-11-144-125/+1469
| | | | | | | | | | | | Update defconfigs for running on Xilinx Virtex platforms Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| * powerpc/52xx: update defconfigsGrant Likely2008-11-146-361/+1117
| | | | | | | | Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* | powerpc: Use generic PHY driver for Marvell 88E1111 PHY on GE Fanuc SBC610Martyn Welch2008-11-191-1/+1
|/ | | | | | | | | | | The Marvell PHY driver is currently being used for the 88E1111 on the SBC610. This driver is causing the link to run in 10/Half mode, the generic PHY driver is correctly configuring the PHY as 1000/Full. Edit default config to use generic PHY driver. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc: Update desktop/server defconfigsPaul Mackerras2008-11-118-313/+1033
| | | | | | | | Turned off CONFIG_PCI_LEGACY and turned on EXT4, and otherwise mostly took the defaults. This also updates ppc6xx_defconfig, which covers the 6xx/7xx/7xxx-based embedded boards. Signed-off-by: Paul Mackerras <paulus@samba.org>
* powerpc: Updated Freescale PPC related defconfigsKumar Gala2008-11-0850-1932/+4234
| | | | | | | unset CONFIG_PCI_LEGACY in the defconfigs as none of them enable ISDN drivers which seem to be the only place we are using pci_find_device Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Merge branch 'merge' of ↵Paul Mackerras2008-10-3118-424/+1052
|\ | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx into merge
| * powerpc/44x: Update 44x defconfigsJosh Boyer2008-10-3011-258/+630
| | | | | | | | | | | | Update the PowerPC 44x defconfigs for 2.6.28 Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
| * powerpc/40x: Update 40x defconfigsJosh Boyer2008-10-307-166/+422
| | | | | | | | | | | | Update the PowerPC 40x defconfigs for 2.6.28 Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
OpenPOWER on IntegriCloud