summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/boot/wrapper
Commit message (Collapse)AuthorAgeFilesLines
* powerpc/boot: Properly handle the base "of" boot wrapperBenjamin Herrenschmidt2013-11-051-0/+4
| | | | | | | | | | | | | | The wrapper script needs an explicit rule for the "of" boot wrapper (generic wrapper, similar to pseries). Before 0c9fa29149d3726e14262aeb0c8461a948cc9d56 it was hanlded implicitly by the statement: platformo=$object/"$platform".o But now that epapr.o needs to be added, that doesn't work and an explicit rule must be added. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/boot: Don't change link address for OF-based platformsPaul Mackerras2013-10-301-0/+4
| | | | | | | | | | | | | | | | Commit c55aef0e5bc6 ("powerpc/boot: Change the load address for the wrapper to fit the kernel") adjusts the wrapper address unnecessarily for platforms that use arch/powerpc/boot/of.c, since the code there allocates space for the kernel wherever it can find it and doesn't necessarily load the kernel at address 0. Changing the link address is actually harmful since it can cause the zImage to overlap with Open Firmware and thus fail to boot. To fix this, we set make_space to n for all of the platforms that use of.o. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/zImage: make the "OF" wrapper support ePAPR bootBenjamin Herrenschmidt2013-09-251-4/+5
| | | | | | | | This makes the "OF" zImage wrapper (zImage.pseries, zImage.pmac, zImage.maple) work if booted via a flat device-tree (ePAPR boot mode), and thus potentially usable with kexec. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/ps3: Do not adjust the wrapper load addressStephen Rothwell2012-03-211-9/+13
| | | | | | | | | | | | | | Commit c55aef0e5bc6 "powerpc/boot: Change the load address for the wrapper to fit the kernel" adjusted the laod address if the uncompressed kernel was too large. Ps3 does not compress the kernel and uses a different linker script, so do not adjust the load address in that case. fixes this build error: powerpc64-linux-ld: section .text loaded at [0000000000e00000,0000000000e0721b] overlaps section .kernel:dtb loaded at [0000000000e00000,0000000000e0066f] Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/boot: Change the WARN to INFO for boot wrapper overlap messageSuzuki Poulose2011-12-211-2/+2
| | | | | | | | | | | | | | | | commit c55aef0e5bc6 ("powerpc/boot: Change the load address for the wrapper to fit the kernel") introduced a WARNING to inform the user that the uncompressed kernel would overlap the boot uncompressing wrapper code. Change it to an INFO. I initially thought, this would be a 'WARNING' for the those boards, where the link_address should be fixed, so that the user can take actions accordingly. Changing the same to INFO. Signed-off-by: Suzuki K. Poulose <suzuki@in.ibm.com> Signed-off-by: Josh Boyer <jwboyer@gmail.com>
* powerpc/boot: Change the load address for the wrapper to fit the kernelSuzuki Poulose2011-12-201-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | The wrapper code which uncompresses the kernel in case of a 'ppc' boot is by default loaded at 0x00400000 and the kernel will be uncompressed to fit the location 0-0x00400000. But with dynamic relocations, the size of the kernel may exceed 0x00400000(4M). This would cause an overlap of the uncompressed kernel and the boot wrapper, causing a failure in boot. The message looks like : zImage starting: loaded at 0x00400000 (sp: 0x0065ffb0) Allocating 0x5ce650 bytes for kernel ... Insufficient memory for kernel at address 0! (_start=00400000, uncompressed size=00591a20) This patch shifts the load address of the boot wrapper code to the next higher MB, according to the size of the uncompressed vmlinux. With the patch, we get the following message while building the image : WARN: Uncompressed kernel (size 0x5b0344) overlaps the address of the wrapper(0x400000) WARN: Fixing the link_address of wrapper to (0x600000) Signed-off-by: Suzuki K. Poulose <suzuki@in.ibm.com> Signed-off-by: Josh Boyer <jwboyer@gmail.com>
* Merge remote-tracking branch 'jwb/next' into nextBenjamin Herrenschmidt2011-12-161-0/+3
|\ | | | | | | | | Conflicts: arch/powerpc/platforms/40x/ppc40x_simple.c
| * powerpc/47x: Add support for the new IBM currituck platformTony Breeds2011-12-091-0/+3
| | | | | | | | | | | | | | Based on original work by David 'Shaggy' Kleikamp. Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Josh Boyer <jwboyer@gmail.com>
* | powerpc: Add support for OpenBlockS 600Benjamin Herrenschmidt2011-12-081-1/+21
|/ | | | | | | | | | | | | | | | So I've had one of these for a while and it looks like the vendor never bothered submitting the support upstream. This adds it using ppc40x_simple and provides a device-tree. There are some changes to the boot wrapper because the way u-boot works on this thing, it seems to expect a multipart image with the kernel, initrd and dtb in it. The USB support is missing as it needs the yet unmerged driver for the DWC OTG part and the GPIOs may need further definition in the dts. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: Call gzip with -nMichal Marek2011-05-191-3/+3
| | | | | | | | | | The timestamps recorded in the .gz files add no value. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Michal Marek <mmarek@suse.cz> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/boot: Add an ePAPR compliant boot wrapperDavid Gibson2011-04-201-0/+4
| | | | | | | | | | | | | | | | | | | | This is a first cut at making bootwrapper code which will produce a zImage compliant with the requirements set down by ePAPR. This is a very simple bootwrapper, taking the device tree blob supplied by the ePAPR boot program and passing it on to the kernel. It builds on the earlier patch to build a relocatable ET_DYN zImage to meet the other ePAPR image requirements. For good measure we have some paranoid checks which will generate warnings if some of the ePAPR entry condition guarantees are not met. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/boot: Allow building the zImage wrapper as a relocatable ET_DYNMichael Ellerman2011-04-201-3/+6
| | | | | | | | | | | | | | | | | | | This patch adds code, linker script and makefile support to allow building the zImage wrapper around the kernel as a position independent executable. This results in an ET_DYN instead of an ET_EXEC ELF output file, which can be loaded at any location by the firmware and will process its own relocations to work correctly at the loaded address. This is of interest particularly since the standard ePAPR image format must be an ET_DYN (although this patch alone is not sufficient to produce a fully ePAPR compliant boot image). Note for now we don't enable building with -pie for anything. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/4xx: Simple platform for the ISS 4xx simulatorTorez Smith2010-05-051-0/+3
| | | | | | | | | | | This is a trivial 4xx plaform that uses the new simple bsp from Josh and is handy to use in simulators such as ISS or even Mambo who don't properly implement most of the actual devices in the SoC but really only the core. Signed-off-by: Torez Smith <lnxtorez@linux.vnet.ibm.com> Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
* powerpc: Add a new zImage for maple using a different link addressCorey Minyard2010-04-071-1/+5
| | | | | | | | | The maple platform failed to load because it's firmware could not take a link address of 0x4000000. A new platform type with a link address of 0x400000 had to be created for the maple. Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: Use scripts/mkuboot.sh instead of 'mkimage'Peter Tyser2009-12-301-2/+5
| | | | | | | | | | | mkuboot.sh provides a basic wrapper for the 'mkimage' utility. Using mkuboot.sh provides clearer error reporting and allows a toolchain to use its own 'mkimage' executable specified by ${CROSS_COMPILE}mkimage. Additionally, this brings PowerPC in line with other architectures which already call mkimage via mkuboot.sh. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* powerpc: wii: bootwrapper bitsAlbert Herranz2009-12-121-1/+1
| | | | | | | | | | | | | | Add support for the Nintendo Wii video game console to the powerpc bootwrapper. dtbImage.wii is a wrapped image that contains a flat device tree, an entry point compatible with the Homebrew Channel and BootMii, and an optional initrd. Signed-off-by: Albert Herranz <albert_herranz@yahoo.es> Acked-by: Segher Boessenkool <segher@kernel.crashing.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* powerpc: gamecube: bootwrapper bitsAlbert Herranz2009-12-121-0/+4
| | | | | | | | | | | | Add support for the Nintendo GameCube video game console to the powerpc bootwrapper. dtbImage.gamecube is a wrapped image that contains a flat device tree, an entry point compatible with SDload, and an optional initrd. Signed-off-by: Albert Herranz <albert_herranz@yahoo.es> Acked-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* powerpc: Update boot wrapper script with the new location of dtcLucian Adrian Grijincu2009-08-201-1/+2
| | | | | | | | | | dtc was moved in 9fffb55f66127b52c937ede5196ebfa0c0d50bce from arch/powerpc/boot/ to scripts/dtc/ This patch updates the wrapper script to point to the new location of dtc. Signed-off-by: Lucian Adrian Grijincu <lgrijincu@ixiacom.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/bootwrapper: Custom build options for XPedite52xx targetsNate Case2009-06-151-0/+4
| | | | | | | | | | | Some XPedite52xx boards have a legacy boot loader requiring some special care in the boot wrapper. The use of cuboot-85xx is needed to fix up embedded device trees, and a custom link address is specified to accommodate the boot loader and larger kernel image sizes used on X-ES MPC85xx platforms. Signed-off-by: Nate Case <ncase@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/bootwrapper: add fixed-head.o to simpleimage wrappersGrant Likely2009-03-111-2/+2
| | | | | | | | | fixed-head.o must be linked into the bootwrapper for raw-binary images to work. This patch adds it into the bootwrapper. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Reported-by: Eddie Dawydiuk <eddie@embeddedarm.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/amigaone: Bootwrapper and serial console support for AmigaOneGerhard Pircher2009-02-111-0/+3
| | | | | | | | | | | This adds the bootwrapper for the cuImage target and a compatible property check for "pnpPNP,501" to the generic serial console support code. The default link address for the cuImage target is set to 0x800000. This allows to boot the kernel with AmigaOS4's second level bootloader, which always loads a uImage at 0x500000. Signed-off-by: Gerhard Pircher <gerhard_pircher@gmx.net> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* Revert "powerpc: Sync RPA note in zImage with kernel's RPA note"Paul Mackerras2008-10-311-7/+2
| | | | | | | | | | | | This reverts commit 91a00302959545a9ae423e99732b1e46eb19e877, plus commit 0dcd440120ef12879ff34fc78d7e4abf171c79e4 ("powerpc: Revert CHRP boot wrapper to real-base = 12MB on 32-bit") which depended on it. Commit 91a00302 was causing NVRAM corruption on some pSeries machines, for as-yet unknown reasons, so this reverts it until the cause is identified. Signed-off-by: Paul Mackerras <paulus@samba.org>
* powerpc: Revert CHRP boot wrapper to real-base = 12MB on 32-bitPaul Mackerras2008-10-211-1/+4
| | | | | | | | | | | | | | | | Commit 9b09c6d909dfd8de96b99b9b9c808b94b0a71614 ("powerpc: Change the default link address for pSeries zImage kernels") changed the real-base value in the CHRP note added by addnote to the zImage from 12MB to 32MB. It turns out that this causes unnecessary extra reboots on old 32-bit CHRP machines. This therefore adds a -r flag to addnote to allow us to specify what real-base value it should put in the CHRP note, and adjusts the wrapper script to pass -r c00000 to addnote when making a zImage for a CHRP machine. Also, CHRP machines ignore the RPA note, so we don't need to arrange for it to be the same as the kernel's. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: Sync RPA note in zImage with kernel's RPA notePaul Mackerras2008-10-101-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 9b09c6d909dfd8de96b99b9b9c808b94b0a71614 ("powerpc: Change the default link address for pSeries zImage kernels") changed the real-base value in the CHRP note added by the addnote program from 12MB to 32MB to give more space for Open Firmware to load the zImage. (The real-base value says where we want OF to position itself in memory.) However, this change was ineffective on most pSeries machines, because the RPA note added by addnote has the "ignore me" flag set to 1. This was intended to tell OF to ignore just the RPA note, but has the side effect of also making OF ignore the CHRP note (at least on most pSeries machines). To solve this we have to set the "ignore me" flag to 0 in the RPA note. (We can't just omit the RPA note because that is equivalent to having an RPA note with default values, and the default values are not what we want.) However, then we have to make sure the values in the zImage's RPA note match up with the values that the kernel supplies later in prom_init.c with either the ibm,client-architecture-support call or the process-elf-header call in prom_send_capabilities(). So this sets the "ignore me" flag in the RPA note in addnote to 0, and adjusts the RPA note values in addnote.c and in prom_init.c to be consistent with each other and with the values in ibm_architecture_vec. However, since the wrapper is independent of the kernel, this doesn't ensure that the notes will stay consistent. To ensure that, this adds code to addnote.c so that it can extract the kernel's RPA note from the kernel binary and put that in the zImage. To that end, we put the kernel's fake ELF header (which contains the kernel's RPA note) into its own section, and arrange for wrapper to pull out that section with objcopy and pass it to addnote, which then extracts the RPA note from it and transfers it to the zImage. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc: Add cuImage.mpc866ads to the bootwrapper as a cuboot-8xx targetScott Wood2008-08-211-1/+1
| | | | | | | | | | | | | | | | | | This patch fixes the following build error with mpc866_ads_defconfig: <-- snip --> ... WRAP arch/powerpc/boot/cuImage.mpc866ads powerpc64-linux-ld: arch/powerpc/boot/cuboot-mpc866ads.o: No such file: No such file or directory make[2]: *** [arch/powerpc/boot/cuImage.mpc866ads] Error 1 <-- snip --> Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/bootwrapper: add missing bit of simpleImage targetGrant Likely2008-07-041-0/+4
| | | | | | | | The wrapper script is missing the bits needed for building generic simpleImage targets (targets which don't depend on any particular firmware interface and retrieve all their data from the device tree). Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* powerpc/virtex: Fix booting of Xilinx FPGAs with 16550 for 405 and 440John Linn2008-07-041-1/+5
| | | | | | | | | | | | The following changes add processing to initialize the Xilinx 16550 UART in the boot wrapper for Virtex targets without firmware. Normally the boot wrapper assumes that the serial port has already been initialized by firmware. The wrapper was also modified to add the 440 build. Signed-off-by: John Linn <john.linn@xilinx.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* powerpc: Change the default link address for pSeries zImage kernelsTony Breeds2008-07-011-2/+12
| | | | | | | | | | | | | | | Currently we set the start of the .text section to be 4Mb for pSeries. In situations where the zImage is > 8Mb we'll fail to boot (due to overlapping with OF). Move .text in a zImage from 4MB to 64MB (well past OF). We still will not be able to load large zImage unless we also move OF, to that end, add a note to the zImage ELF to move OF to 32Mb. If this is the very first kernel booted then we'll need to move OF manually by setting real-base. Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* powerpc/85xx: add board support for the TQM8548 modulesWolfgang Grandegger2008-06-101-1/+1
| | | | | | | | This patch adds support for the TQM8548 modules from TQ-Components GmbH (http://www.tqc.de). Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] 83xx: Add support for Analogue & Micro ASP837E boardBryan O'Donoghue2008-06-021-1/+5
| | | | | | | | | | The following adds support for the Analogue & Micro ASP 8347E, running Redboot. http://www.analogue-micro.com/ASP8347.html Signed-off-by: Bryan O'Donoghue <bodonoghue@codehermit.ie> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] bootwrapper: Use physical address in PHDR for uImageKumar Gala2008-04-171-1/+4
| | | | | | | | | | | | | | Now that we properly set the physical address in the program header of the vmlinux ELF we can extract it to properly set the load and entry point for u-boot uImages. Before we always hard coded the load & entry point to 0. However there are situations that the kernel may be built with a non-zero physical address. We use objdump to extract the PHDR. We assume that there is only one PHDR in the vmlinux of type LOAD. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] bootwrapper: Add a firmware-independent simpleboot target.Grant Likely2008-04-021-0/+4
| | | | | | | | | This target produces a flat binary rather than an ELF file, fixes the entry point at the beginning of the image, and takes a complete device tree with no fixups needed. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
* [POWERPC] PS3: Bootwrapper improvementsGeoff Levand2008-04-011-10/+11
| | | | | | | | | | | | | | | | Improve the debugging support of the PS3 bootwraper code: o Increase the size of the PS3 bootwrapper overlay from 256 to 512 bytes to allow for more debugging code in the overlay. o Use the dot symbol to set the size of __system_reset_overlay. The assembler will then emit an error if the overlay code is too big. o Remove some unused instructions. o Update the text describing the PS3 bootwrapper overlay. o Add a check for null pointer writes. o Change hcall return value from s64. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] 85xx: Emerson KSI8560 bootwrapperAlexandr Smirnov2008-03-261-1/+1
| | | | | | | Add boot wrapper for Emerson KSI8560 board. Signed-off-by: Alexandr Smirnov <asmirnov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] Fix build failure for tqm8540 and sbc85xx defconfigsPaul Gortmaker2008-03-201-2/+2
| | | | | | | | | | | The wrapper script didn't have entries for the TQM8540 board and the SBC8548 or SBC8560 boards. I've assumed that the TQM8540 console is 8250 based and not CPM based by looking at its defconfig. There was also a trailing * on the TQM8555 entry that I removed too. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] 8xx: Fix wrapper platform for adder875, and combine defconfigs.Scott Wood2008-03-071-1/+5
| | | | | | | | | | This fixes the following bug: http://ozlabs.org/pipermail/linuxppc-dev/2008-February/051979.html Separate defconfigs are no longer needed now that CONFIG_DEVICE_TREE is gone. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] bootwrapper: Build multiple cuImagesGrant Likely2008-02-071-0/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, the kernel uses CONFIG_DEVICE_TREE to wrap a kernel image with a fdt blob which means for any given configuration only one dts file can be selected and so support for only one board can be built This moves the selection of the default .dts file out of the kernel config and into the bootwrapper makefile. The makefile chooses which images to build based on the kernel config and the dts source file name is taken directly from the image name. For example "cuImage.ebony" will use "ebony.dts" as the device tree source file. In addition, this patch allows a specific image to be requested from the command line by adding "cuImage.%" and "treeImage.%" targets to the list of valid built targets in arch/powerpc/Makefile. This allows the default dts selection to be overridden. Another advantage to this change is it allows a single defconfig to be supplied for all boards using the same chip family and only differing in the device tree. Important note: This patch adds two new zImage targets; zImage.dtb.% and zImage.dtb.initrd.% for zImages with embedded dtb files. Currently there are 5 platforms which require this: ps3, ep405, mpc885ads, ep88xc, adder875-redboot and ep8248e. This patch *changes the zImage filenames* for those platforms. ie. 'zImage.ps3' is now 'zImage.dtb.ps3'. This new zImage.dtb targets were added so that the .dts file could be part of the dependancies list for building them. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] 82xx: Embedded Planet EP8248E supportScott Wood2008-01-231-1/+1
| | | | | | | | This board is also resold by Freescale under the names "QUICCStart MPC8248 Evaluation System" and "CWH-PPC-8248N-VE". Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] 8xx: Analogue & Micro Adder875 board support.Scott Wood2008-01-231-1/+1
| | | | | Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] 4xx: EP405 boards support for arch/powerpcBenjamin Herrenschmidt2007-12-231-1/+1
| | | | | | | | | | | | | | | | | Brings EP405 support to arch/powerpc. The IRQ routing for the CPLD comes from a device-tree property, PCI is working to the point where I can see the video card, USB device, and south bridge. This should work with both EP405 and EP405PC. I've not totally figured out how IRQs are wired on this hardware though, thus at this stage, expect only USB interrupts working, pretty much the same as what arch/ppc did. Also, the flash, nvram, rtc and temp control still have to be wired. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
* [POWERPC] Use embedded dtc in kernel buildsDavid Gibson2007-12-201-1/+1
| | | | | | | | | | This patch alters the kernel makefiles to build dtc from the sources embedded in the previous patch. It also changes the arch/powerpc/boot/wrapper script to use the embedded dtc, rather than expecting a copy of dtc already installed on the system. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Allow for bootwrapper utilities being in different directory to ↵David Woodhouse2007-12-061-3/+5
| | | | | | | | | | | objects It's possible that the executables which are built as helpers for the bootwrapper stuff might end up in a different place to the intermediate object files. Handle that. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Find device-tree source file in default directoryDavid Woodhouse2007-12-061-0/+3
| | | | | | | | If a .dts file is given to the bootwrapper script without a full path name, look in a sensible place for it. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] Create otheros.bld next to specified output file, not in $object ↵David Woodhouse2007-12-061-3/+3
| | | | | | | | | | | | | | | | | | | directory The bootwrapper script currently generates an 'otheros.bld' file in addition to the file specified by the -o option, when asked to build a wrapper for PS3. It should do that in the same directory as the output, not the directory where the wrapper objects are kept (which might potentially not be writable when the script runs). Arguably, the 'otheros.bld' ought to be created with the filename specified as the -o argument. But that's a more intrusive change. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* Merge branch 'for-2.6.24' of ↵Paul Mackerras2007-11-081-17/+15
|\ | | | | | | master.kernel.org:/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx into merge
| * [POWERPC] bootwrapper: Bail from script if any command failsGrant Likely2007-11-011-17/+10
| | | | | | | | | | | | | | | | | | Add the 'set -e' command to the wrapper script so that if any command fails then the script will automatically exit Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
| * [POWERPC] bootwrapper: Allow wrapper script to execute verboselyGrant Likely2007-11-011-0/+5
| | | | | | | | | | | | | | | | | | Allow wrapper script to print verbose progress when the V is set in the environment. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
* | [POWERPC] bootwrapper: Revert ps3 binary flag usage, and remove .bin suffixScott Wood2007-11-081-6/+7
|/ | | | | | | | | | | | | | | The ps3 target produces two images, and the binary one is not the "primary" image that corresponds to the -o flag; thus, it no longer uses the generic binary flag. On platforms which do use the binary flag, it no longer produces a .bin suffix, so that the output file matches what was passed to the -o flag. This should fix the zImage ln problems for the ps3 target. Signed-off-by: Scott Wood <scottwood@freescale.com> Acked-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [POWERPC] 8xx/wrapper: Embedded Planet EP88xC supportScott Wood2007-10-041-6/+14
| | | | | | | | This board is also resold by Freescale under the names "QUICCStart MPC885 Evaluation System" and "CWH-PPC-885XN-VE". Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* [POWERPC] PS3: Bootwrapper support.Geoff Levand2007-07-101-0/+55
| | | | | | | | | | | | | | | | | | | | | | | | | Add support to build the PS3 flash rom image and remove some unneeded lmb calls. The PS3's lv1 loader supports loading gzipped binary images from flash rom to addr zero. The loader enters the image at addr 0x100. In this implementation a bootwrapper overlay is use to arrange for the kernel to be loaded to addr zero and to have a suitable bootwrapper entry at 0x100. To construct the rom image, 0x100 bytes from offset 0x100 in the kernel is copied to the bootwrapper symbol __system_reset_kernel. The 0x100 bytes at the bootwrapper symbol __system_reset_overlay is then copied to offset 0x100. At runtime the bootwrapper program copies the 0x100 bytes at __system_reset_kernel to addr 0x100. zImage.ps3 is a wrapped image that contains a flat device tree, an lv1 compatible entry point, and an optional initrd. otheros.bld is the gzip compresed rom image built from zImage.ps3. otheros.bld is suitable for programming into the PS3 boot flash memory. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
OpenPOWER on IntegriCloud