summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/boot/dts/fsl
Commit message (Collapse)AuthorAgeFilesLines
* powerpc/85xx: Add silicon device tree for C293Mingkai Hu2013-08-232-0/+256
| | | | | | Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: Po Liu <Po.Liu@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* powerpc/85xx: Add SEC6.0 device treeMingkai Hu2013-08-231-0/+56
| | | | | | | | Add device tree for SEC 6.0 used on C29x silicon. Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: Po Liu <Po.Liu@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* powerpc/dts: add MPIC v4.3 dts nodeMinghuan Lian2013-08-073-2/+151
| | | | | | | | | | | For the latest platform T4 and B4, MPIC controller has been updated to v4.3. This patch adds a new file to describe the latest MPIC. The MSI blocks number is increased to four, the registers number of each block is increased to sixteen. MSIIR1 has been added to access these sixteen MSI registers. Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* powerpc: Add T4 LAC device tree binding & defsJoe Liccese2013-06-242-0/+201
| | | | | | | | | | | | | | | | | | The Interlaken is a narrow, high speed channelized chip-to-chip interface. To facilitate interoperability between a data path device and a look-aside co-processor, the Interlaken Look-Aside protocol is defined for short transaction-related transfers. Although based on the Interlaken protocol, Interlaken Look-Aside is not directly compatible with Interlaken and can be considered a different operation mode. The Interlaken LA controller connects internal platform to Interlaken serial interface. It accepts LA command through software portals, which are system memory mapped 4KB spaces. The LA commands are then translated into the Interlaken control words and data words, which are sent on TX side to TCAM through SerDes lanes. Signed-off-by: Joe Liccese <joe.liccese@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* powerpc/fsl-booke: add the reg prop for pci bridge device node for T4/B4Kevin Hao2013-04-292-0/+5
| | | | | | | | | | | The reg property in the pci bridge device node is used to bind this device node to the pci bridge device. Then all the pci devices under this bridge could use the interrupt maps defined in this device node to do the irq translation. So if this property is missed, the pci traditional irq mechanism will not work. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/fsl: Add property for 'era' in SEC dts crypto nodeVakul Garg2013-04-117-0/+7
| | | | | | | | | The crypto node now contains a new property 'fsl,sec-era'. This is required so that applications can retrieve era info without having to be able to read SEC's register space. Signed-off-by: Vakul Garg <vakul@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/fsl: removed qoriq-sec4.1-0.dtsi.Vakul Garg2013-04-111-109/+0
| | | | | | | Removing qoriq-sec4.1-0.dtsi as it is not used by any soc anymore. Signed-off-by: Vakul Garg <vakul@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/fsl-booke: Add initial silicon device tree files for B4860 and B4420Shaveta Leekha2013-04-105-0/+663
| | | | | | | | | | | | | | | | | | | | | | | | | B4860 and B4420 are similar that share some commonalities * common features have been added in b4si-pre.dtsi and b4si-post.dtsi * differences are added in respective silicon files of B4860 and B4420 There are several things missing from the device trees of B4860 and B4420: * DPAA related nodes (Qman, Bman, Fman, Rman) * DSP related nodes/information * serdes, sfp(security fuse processor), thermal, gpio, maple, cpri, quad timers nodes Signed-off-by: Shaveta Leekha <shaveta@freescale.com> Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com> Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Vakul Garg <vakul@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/fsl-booke: Minor fixes to T4240 Si device treeKumar Gala2013-04-092-13/+13
| | | | | | | * Fix cpu unit address to match reg * Update compatible for rcpm & clockgen to be 2.0 instead of 2 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: add SEC-5.3 device treeShaveta Leekha2013-04-031-0/+118
| | | | | | Signed-off-by: Vakul Garg <vakul@freescale.com> Signed-off-by: Shaveta Leekha <shaveta@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/fsl-booke: Update T4240 device config node in device treeKumar Gala2013-03-181-1/+1
| | | | | | | As the T4240 is based on corenet chassis v2.0 spec we update the global utilities (GUTS) device config compatiable to reflect this. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/fsl-booke: Update DCSR EPU device tree entries for existing SoCsStephen George2013-03-185-5/+5
| | | | | | | Identifies the epu as compatible with Chassis v1 Debug IP. Signed-off-by: Stephen George <Stephen.George@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/fsl-booke: Added device tree DCSR entries for T4240 Chassis v2 Debug IPStephen George2013-03-182-12/+144
| | | | | Signed-off-by: Stephen George <Stephen.George@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Add first usb controller node for Qonverge platformsRamneek Mehresh2013-03-121-0/+41
| | | | | | | | Add first usb controller node for qonverge qoriq platforms like B4860, etc Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/fsl-booke: Add initial silicon device tree for T4240Kumar Gala2013-03-125-0/+557
| | | | | | | | | | | | | | | | | | | | | | | | | Enable a baseline T4240 SoC to boot. There are several things missing from the device trees for T4240: * Proper PAMU topology information * DPAA related nodes (Qman, Bman, Fman, Rman, DCE) * Prefetch Manager * Thermal monitor unit * Interlaken Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Vakul Garg <vakul@freescale.com> Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Signed-off-by: Laurentiu Tudor <Laurentiu.Tudor@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Added SEC-5.0 device tree.Vakul Garg2013-03-051-0/+109
| | | | | | | | Add device tree for SEC (crypto engine) version 5.0 used on T4240. Signed-off-by: Vakul Garg <vakul@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc: add missing deo arch category to e500mc/e5500 dtsStuart Yoder2013-03-052-0/+2
| | | | | Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/e6500: Add architecture categories for e6500 coresStuart Yoder2013-03-051-0/+65
| | | | | | | -also define a binding for fsl,eref-* properties Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: dts - add ranges property for SECPo Liu2013-02-131-0/+1
| | | | | | | | This facilitates getting the physical address of the SEC node. Signed-off-by: Liu po <po.liu@freescale.com> Reviewed-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: fix various PCI node compatible stringsTimur Tabi2013-02-133-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | Fix and/or improve the compatible strings of the PCI device tree nodes for some Freescale SOCs. This fixes some issues and improves consistency among the SOCs. Specifically: 1) The P1022 has a v1 PCIe controller, so the compatible property should just say "fsl,mpc8548-pcie". U-Boot does not look for "fsl,p1022-pcie", so it wasn't fixing up the node. 2) The P4080 has a v2.1 PCIe controller, so add that version-specific string to the device tree. Update the kernel to also look for that string. Currently, the kernel looks for "fsl,p4080-pcie" specifically, but eventually that check should be deleted. 3) The P1010 device tree claims compatibility with v2.2 and v2.3, but that's redundant. No other device tree does this. Remove the v2.2 string. 4) The kernel looks for both "fsl,p1023-pcie" and "fsl,qoriq-pcie-v2.2", even though the P1023 device trees has always included both strings. Remove the search for "fsl,p1023-pcie". Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: describe the PAMU topology in the device treeTimur Tabi2013-02-135-48/+378
| | | | | | | | | | | | | | | | | | | | | The PAMU caches use the LIODNs to determine which cache lines hold the entries for the corresponding LIODs. The LIODNs must therefore be carefully assigned to avoid cache thrashing -- two active LIODs with LIODNs that put them in the same cache line. Currently, LIODNs are statically assigned by U-Boot, but this has limitations. LIODNs are assigned even for devices that may be disabled or unused by the kernel. Static assignments also do not allow for device drivers which may know which LIODs can be used simultaneously. In other words, we really should assign LIODNs dynamically in Linux. To do that, we need to describe the PAMU device and cache topologies in the device trees. Signed-off-by: Timur Tabi <timur@freescale.com> Acked-by: Stuart Yoder <stuart.yoder@freescale.com> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/dma/raidengine: add raidengine deviceXuelin Shi2012-11-253-0/+92
| | | | | | | | | | | | | The RaidEngine is a new Freescale hardware that used for parity computation offloading in RAID5/6. This patch adds the device node in device tree and related binding documentation. Signed-off-by: Harninder Rai <harninder.rai@freescale.com> Signed-off-by: Naveen Burmi <naveenburmi@freescale.com> Signed-off-by: Xuelin Shi <b29237@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/e5500: Add Power ISA properties to comply with ePAPR 1.1Olivia Yin2012-09-123-0/+65
| | | | | | | | | | | | | | | | | power-isa-version and power-isa-* are cpu node general properties defined in ePAPR. If the power-isa-version property exists, then for each category from the Categories section of Book I of the Power ISA version indicated, the existence of a property named power-isa-[CAT], where [CAT] is the abbreviated category name with all uppercase letters converted to lowercase, indicates that the category is supported by the implementation. This patch update all the e5500 platforms. Signed-off-by: Liu Yu <yu.liu@freescale.com> Signed-off-by: Olivia Yin <hong-hua.yin@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/e500mc: Add Power ISA properties to comply with ePAPR 1.1Olivia Yin2012-09-124-0/+67
| | | | | | | | | | | | | | | | | power-isa-version and power-isa-* are cpu node general properties defined in ePAPR. If the power-isa-version property exists, then for each category from the Categories section of Book I of the Power ISA version indicated, the existence of a property named power-isa-[CAT], where [CAT] is the abbreviated category name with all uppercase letters converted to lowercase, indicates that the category is supported by the implementation. The patch update all the e500mc platforms. Signed-off-by: Liu Yu <yu.liu@freescale.com> Signed-off-by: Olivia Yin <hong-hua.yin@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/e500v2: Add Power ISA properties to comply with ePAPR 1.1Olivia Yin2012-09-1213-0/+88
| | | | | | | | | | | | | | | | | power-isa-version and power-isa-* are cpu node general properties defined in ePAPR. If the power-isa-version property exists, then for each category from the Categories section of Book I of the Power ISA version indicated, the existence of a property named power-isa-[CAT], where [CAT] is the abbreviated category name with all uppercase letters converted to lowercase, indicates that the category is supported by the implementation. The patch update all e500v2 platforms. Signed-off-by: Liu Yu <yu.liu@freescale.com> Signed-off-by: Olivia Yin <hong-hua.yin@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: add Freescale P5040 SOC and SEC v5.2 device treesKim Phillips2012-09-123-0/+549
| | | | | | | | | Add device tree (dtsi) files for the Freescale P5040 SOC. Since this SOC introduces SEC v5.2, add the dtsi file for that also. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/p4080ds: dts - add usb controller version info and port0Shengzhou Liu2012-08-101-0/+7
| | | | | | | | Add the missing usb controller version info and port0, which is required during setup usb phy. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Add ucc uart support for p1025rdbZhicheng Fan2012-07-101-1/+15
| | | | | | | Add device tree nodes to enable ucc uart support on P1025RDB. Signed-off-by: Zhicheng Fan <B32736@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Add BSC9131 RDB SupportPrabhakar Kushwaha2012-07-102-0/+252
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BSC9131RDB is a Freescale reference design board for BSC9131 SoC. The BSC9131 is integrated SoC that targets Femto base station market. It combines Power Architecture e500v2 and DSP StarCore SC3850 core technologies with MAPLE-B2F baseband acceleration processing elements. The BSC9131 SoC includes the following function and features: . Power Architecture subsystem including a e500 processor with 256-Kbyte shared L2 cache . StarCore SC3850 DSP subsystem with a 512-Kbyte private L2 cache . The Multi Accelerator Platform Engine for Femto BaseStation Baseband Processing (MAPLE-B2F) . A multi-standard baseband algorithm accelerator for Channel Decoding/Encoding, Fourier Transforms, UMTS chip rate processing, LTE UP/DL Channel processing, and CRC algorithms . Consists of accelerators for Convolution, Filtering, Turbo Encoding, Turbo Decoding, Viterbi decoding, Chiprate processing, and Matrix Inversion operations . DDR3/3L memory interface with 32-bit data width without ECC and 16-bit with ECC, up to 400-MHz clock/800 MHz data rate . Dedicated security engine featuring trusted boot . DMA controller . OCNDMA with four bidirectional channels . Interfaces . Two triple-speed Gigabit Ethernet controllers featuring network acceleration including IEEE 1588. v2 hardware support and virtualization (eTSEC) . eTSEC 1 supports RGMII/RMII . eTSEC 2 supports RGMII . High-speed USB 2.0 host and device controller with ULPI interface . Enhanced secure digital (SD/MMC) host controller (eSDHC) . Antenna interface controller (AIC), supporting three industry standard JESD207/three custom ADI RF interfaces (two dual port and one single port) and three MAXIM's MaxPHY serial interfaces . ADI lanes support both full duplex FDD support and half duplex TDD support . Universal Subscriber Identity Module (USIM) interface that facilitates communication to SIM cards or Eurochip pre-paid phone cards . TDM with one TDM port . Two DUART, four eSPI, and two I2C controllers . Integrated Flash memory controller (IFC) . TDM with 256 channels . GPIO . Sixteen 32-bit timers The DSP portion of the SoC consists of DSP core (SC3850) and various accelerators pertaining to DSP operations. BSC9131RDB Overview ---------------------- BSC9131 SoC 1Gbyte DDR3 (on board DDR) 128Mbyte 2K page size NAND Flash 256 Kbit M24256 I2C EEPROM 128 Mbit SPI Flash memory USB-ULPI eTSEC1: Connected to RGMII PHY eTSEC2: Connected to RGMII PHY DUART interface: supports one UARTs up to 115200 bps for console display Linux runs on e500v2 core and access some DSP peripherals like AIC Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Signed-off-by: Akhil Goyal <Akhil.Goyal@freescale.com> Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Rajan Srivastava <rajan.srivastava@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Revert "powerpc/p3060qds: Add support for P3060QDS board"Timur Tabi2012-07-102-427/+0
| | | | | | | | | | This reverts commit 96cc017c5b7ec095ef047d3c1952b6b6bbf98943. The P3060 was cancelled before it went into production, so there's no point in supporting it. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/mpc85xx: add MPIC message dts nodeMingkai Hu2012-04-192-0/+53
| | | | | Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/fsl: Added aliased MSIIR register address to MSI node in dtsDiana CRACIUN2012-03-161-3/+3
| | | | | | | | | | | | | | | The MSIIR register for each MSI bank is aliased to a different address. The MSI node reg property was updated to contain this address: e.g. reg = <0x41600 0x200 0x44140 4>; The first region contains the address and length of the MSI register set and the second region contains the address of the aliased MSIIR register at 0x44140. Signed-off-by: Diana CRACIUN <Diana.Craciun@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: mpc8548cds - fix alias in mpc8548si-pre.dtsiZhao Chenhui2012-03-161-1/+3
| | | | | | | | Correct ethernet1 and add ethernet2 and ethernet3. Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: mpc8548cds - Add RapidIO node to dtschenhui zhao2012-03-161-0/+16
| | | | | | | | Enable RapidIO and add rapidio and rmu nodes to dts. Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/dts: fix the compatible string of sec 4.0Liu Shuo2012-03-161-5/+5
| | | | | | | | | Fix the compatible string of sec 4.0 to match with CAAM driver according to Documentation/devicetree/bindings/crypto/fsl-sec4.txt Signed-off-by: Liu Shuo <shuo.liu@freescale.com> Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: p1022ds: disable the NOR flash node if video is enabledTimur Tabi2012-03-161-1/+5
| | | | | | | | | | | | | | | | The Freescale P1022 has a unique pin muxing "feature" where the DIU video controller's video signals are muxed with 24 of the local bus address signals. When the DIU is enabled, the bulk of the local bus is disabled, preventing access to memory-mapped devices like NOR flash and the pixis FPGA. Therefore, if the DIU is going to be enabled, then memory-mapped devices on the localbus, like NOR flash, need to be disabled. This also means that the localbus is not a 'simple-bus' any more, so remove that string from the compatible node. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Add magic-packet properties for etsecXie Xiaobo2012-03-164-4/+8
| | | | | | | | The properties indicates that the hardware supports waking up via magic packet. Signed-off-by: Xie Xiaobo <X.Xie@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Add usb controller version infoRamneek Mehresh2012-03-1611-2/+38
| | | | | | | | | Add usb controller version info for the following: MPC8536, P1010, P1020, P1021, P1022, P1023, P2020, P2041, P3041, P3060, P5020 Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Added dts for P1021RDB-PC boardXu Jiucheng2012-03-161-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | P1021RDB-PC Overview ----------------- 1Gbyte DDR3 (on board DDR) 16Mbyte NOR flash 32Mbyte eSLC NAND Flash 256 Kbit M24256 I2C EEPROM 128 Mbit SPI Flash memory Real-time clock on I2C bus SD/MMC connector to interface with the SD memory card PCIex - x1 PCIe slot or x1 PCIe to dual SATA controller - x1 mini-PCIe slot USB 2.0 - ULPI PHY interface: SMSC USB3300 USB PHY and Genesys Logic’s GL850A - Two USB2.0 Type A receptacles - One USB2.0 signal to Mini PCIe slot eTSEC1: Connected to RGMII PHY VSC7385 eTSEC2: Connected to SGMII PHY VSC8221 eTSEC3: Connected to SGMII PHY AR8021 DUART interface: supports two UARTs up to 115200 bps for console display Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Xu Jiucheng <B37781@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/mpic: Add "last-interrupt-source" property to override hardwareKyle Moffett2012-02-231-0/+1
| | | | | | | | | | | | The FreeScale PowerQUICC-III-compatible (mpc85xx/mpc86xx) MPICs do not correctly report the number of hardware interrupt sources, so software needs to override the detected value with "256". To avoid needing to write custom board-specific code to detect that scenario, allow it to be easily overridden in the device-tree. Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* fsl/mpic: Create and document the "single-cpu-affinity" device-tree flagKyle Moffett2012-02-231-0/+1
| | | | | | | | | | | | | | | | The Freescale MPIC (and perhaps others in the future) is incapable of routing non-IPI interrupts to more than once CPU at a time. Currently all of the Freescale boards msut pass the MPIC_SINGLE_DEST_CPU flag to mpic_alloc(), but that information should really be present in the device-tree. Older board code can't rely on the device-tree having the property set, but newer platforms won't need it manually specified in the code. [BenH: Remove unrelated changes, folded in a different patch] Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* fsl/mpic: Document and use the "big-endian" device-tree flagKyle Moffett2012-02-231-0/+1
| | | | | | | | | | | | | | | | | The MPIC code checks for a "big-endian" property and sets the flag MPIC_BIG_ENDIAN if one is present, although prior to the "mpic->flags" fixup that would never have worked anways. Unfortunately, even now that it works properly, the Freescale mpic device-node (the "PowerQUICC-III"-compatible one) does not specify it, so all of the board ports need to manually pass it to mpic_alloc(). Document the flag and add it to the pq3 device tree. Existing code will still need to pass the MPIC_BIG_ENDIAN flag because their dtb may not have this property, but new platforms shouldn't need to do so. Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/85xx: Fix cmd12 bug and add the chip compatible for eSDHCJerry Huang2012-01-185-2/+16
| | | | | | | | | | | According to latest kernel, the auto-cmd12 property should be "sdhci,auto-cmd12", and according to the SDHC binding and the workaround for the special chip, add the chip compatible for eSDHC: "fsl,p1022-esdhc", "fsl,mpc8536-esdhc", "fsl,p1020-esdhc", "fsl,p2020-esdhc" and "fsl,p1010-esdhc". Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/fsl: update compatiable on fsl 16550 uart nodesKumar Gala2012-01-043-6/+6
| | | | | | | | The Freescale serial port's are pretty much a 16550, however there are some FSL specific bugs and features. Add a "fsl,ns16550" compatiable string to allow code to handle those FSL specific issues. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Update SRIO device tree nodesKumar Gala2011-11-248-29/+180
| | | | | | | Update all dts files that support SRIO controllers to match the new fsl,srio device tree binding. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Rework P5020DS device treeKumar Gala2011-11-242-0/+431
| | | | | | | | | | | | | Utilize new split between board & SoC, and new SoC device trees split into pre & post utilizing 'template' includes for SoC IP blocks. Other changes include: * Adding of MPIC timer blocks * Dropping "fsl,p5020-IP..." from compatibles for standard blocks * Removed mpic interrupt-parent from dcsr-epu node, just use top level * Removed mpic interrupt-parent from sec nodes, just use top level Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Rework P4080DS device treesKumar Gala2011-11-242-0/+487
| | | | | | | | | | | | | Utilize new split between board & SoC, and new SoC device trees split into pre & post utilizing 'template' includes for SoC IP blocks. Other changes include: * Adding of MPIC timer blocks * Dropping "fsl,p4080-IP..." from compatibles for standard blocks * Removed mpic interrupt-parent from dcsr-epu node, just use top level * Removed mpic interrupt-parent from sec nodes, just use top level Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Rework P3060QDS device treeKumar Gala2011-11-242-0/+421
| | | | | | | | | | | | | | Utilize new split between board & SoC, and new SoC device trees split into pre & post utilizing 'template' includes for SoC IP blocks. Other changes include: * Adding of MPIC timer blocks * Dropping "fsl,p3060-IP..." from compatibles for standard blocks * Removed mpic interrupt-parent from dcsr-epu node, just use top level * Removed mpic interrupt-parent from sec nodes, just use top level * Fixed l3-cache IRQs, we have 2 CPCs, so we should have IRQs for both Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Rework P3041DS device treeKumar Gala2011-11-242-0/+444
| | | | | | | | | | | | | Utilize new split between board & SoC, and new SoC device trees split into pre & post utilizing 'template' includes for SoC IP blocks. Other changes include: * Adding of MPIC timer blocks * Dropping "fsl,p3041-IP..." from compatibles for standard blocks * Removed mpic interrupt-parent from dcsr-epu node, just use top level * Fixed some dcsr compatiable typo's from 'p43041' to 'p3041' Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Rework P2041RDB device treeKumar Gala2011-11-242-0/+416
| | | | | | | | | | | | Utilize new split between board & SoC, and new SoC device trees split into pre & post utilizing 'template' includes for SoC IP blocks. Other changes include: * Adding of MPIC timer blocks * Dropping "fsl,p2041-IP..." from compatibles for standard blocks * Removed mpic interrupt-parent from dcsr-epu node, just use top level Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
OpenPOWER on IntegriCloud