summaryrefslogtreecommitdiffstats
path: root/arch/mips
Commit message (Collapse)AuthorAgeFilesLines
* MIPS: Delete __cpuinit/__CPUINIT usage from MIPS codePaul Gortmaker2013-07-1461-338/+294
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 3747069b25e419f6b51395f48127e9812abc3596 upstream. The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) and are flagged as __cpuinit -- so if we remove the __cpuinit from the arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit related content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. Here, we remove all the MIPS __cpuinit from C code and __CPUINIT from asm files. MIPS is interesting in this respect, because there are also uasm users hiding behind their own renamed versions of the __cpuinit macros. [1] https://lkml.org/lkml/2013/5/20/589 [ralf@linux-mips.org: Folded in Paul's followup fix.] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5494/ Patchwork: https://patchwork.linux-mips.org/patch/5495/ Patchwork: https://patchwork.linux-mips.org/patch/5509/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2013-07-131-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking fixes from David Miller: "Just a bunch of small fixes and tidy ups: 1) Finish the "busy_poll" renames, from Eliezer Tamir. 2) Fix RCU stalls in IFB driver, from Ding Tianhong. 3) Linearize buffers properly in tun/macvtap zerocopy code. 4) Don't crash on rmmod in vxlan, from Pravin B Shelar. 5) Spinlock used before init in alx driver, from Maarten Lankhorst. 6) A sparse warning fix in bnx2x broke TSO checksums, fix from Dmitry Kravkov. 7) Dummy and ifb driver load failure paths can oops, fixes from Tan Xiaojun and Ding Tianhong. 8) Correct MTU calculations in IP tunnels, from Alexander Duyck. 9) Account all TCP retransmits in SNMP stats properly, from Yuchung Cheng. 10) atl1e and via-rhine do not handle DMA mapping failures properly, from Neil Horman. 11) Various equal-cost multipath route fixes in ipv6 from Hannes Frederic Sowa" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (36 commits) ipv6: only static routes qualify for equal cost multipathing via-rhine: fix dma mapping errors atl1e: fix dma mapping warnings tcp: account all retransmit failures usb/net/r815x: fix cast to restricted __le32 usb/net/r8152: fix integer overflow in expression net: access page->private by using page_private net: strict_strtoul is obsolete, use kstrtoul instead drivers/net/ieee802154: don't use devm_pinctrl_get_select_default() in probe drivers/net/ethernet/cadence: don't use devm_pinctrl_get_select_default() in probe drivers/net/can/c_can: don't use devm_pinctrl_get_select_default() in probe net/usb: add relative mii functions for r815x net/tipc: use %*phC to dump small buffers in hex form qlcnic: Adding Maintainers. gre: Fix MTU sizing check for gretap tunnels pkt_sched: sch_qfq: remove forward declaration of qfq_update_agg_ts pkt_sched: sch_qfq: improve efficiency of make_eligible gso: Update tunnel segmentation to support Tx checksum offload inet: fix spacing in assignment ifb: fix oops when loading the ifb failed ...
| * net: rename busy poll socket op and globalsEliezer Tamir2013-07-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Rename LL_SO to BUSY_POLL_SO Rename sysctl_net_ll_{read,poll} to sysctl_busy_{read,poll} Fix up users of these variables. Fix documentation for sysctl. a patch for the socket.7 man page will follow separately, because of limitations of my mail setup. Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds2013-07-13158-2309/+2189
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MIPS updates from Ralf Baechle: "MIPS updates: - All the things that didn't make 3.10. - Removes the Windriver PPMC platform. Nobody will miss it. - Remove a workaround from kernel/irq/irqdomain.c which was there exclusivly for MIPS. Patch by Grant Likely. - More small improvments for the SEAD 3 platform - Improvments on the BMIPS / SMP support for the BCM63xx series. - Various cleanups of dead leftovers. - Platform support for the Cavium Octeon-based EdgeRouter Lite. Two large KVM patchsets didn't make it for this pull request because their respective authors are vacationing" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (124 commits) MIPS: Kconfig: Add missing MODULES dependency to VPE_LOADER MIPS: BCM63xx: CLK: Add dummy clk_{set,round}_rate() functions MIPS: SEAD3: Disable L2 cache on SEAD-3. MIPS: BCM63xx: Enable second core SMP on BCM6328 if available MIPS: BCM63xx: Add SMP support to prom.c MIPS: define write{b,w,l,q}_relaxed MIPS: Expose missing pci_io{map,unmap} declarations MIPS: Malta: Update GCMP detection. Revert "MIPS: make CAC_ADDR and UNCAC_ADDR account for PHYS_OFFSET" MIPS: APSP: Remove <asm/kspd.h> SSB: Kconfig: Amend SSB_EMBEDDED dependencies MIPS: microMIPS: Fix improper definition of ISA exception bit. MIPS: Don't try to decode microMIPS branch instructions where they cannot exist. MIPS: Declare emulate_load_store_microMIPS as a static function. MIPS: Fix typos and cleanup comment MIPS: Cleanup indentation and whitespace MIPS: BMIPS: support booting from physical CPU other than 0 MIPS: Only set cpu_has_mmips if SYS_SUPPORTS_MICROMIPS MIPS: GIC: Fix gic_set_affinity infinite loop MIPS: Don't save/restore OCTEON wide multiplier state on syscalls. ...
| * \ Merge branch '3.10-fixes' into mips-for-linux-nextRalf Baechle2013-07-1242-362/+503
| |\ \ | | | | | | | | | | | | | | | | This that should have been fixed but weren't, way to much, intrusive and late.
| | * | MIPS: tlbex: Fix size of area to be flushed.Ralf Baechle2013-06-271-1/+1
| | | | | | | | | | | | | | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: Flush TLB handlers directly after writing themJonas Gorski2013-06-252-16/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When having enabled MIPS_PGD_C0_CONTEXT, trap_init() might call the generated tlbmiss_handler_setup_pgd before it was committed to memory, causing boot failures: trap_init() |- per_cpu_trap_init() | |- TLBMISS_HANDLER_SETUP() | |- tlbmiss_handler_setup_pgd() |- flush_tlb_handlers() To avoid this, move flush_tlb_handlers() into build_tlb_refill_handler() right after they were generated. We can do this as the cache handling is initialized just before creating the tlb handlers. This issue was introduced in 3d8bfdd0307223de678962f1c1907a7cec549136 ("MIPS: Use C0_KScratch (if present) to hold PGD pointer."). Signed-off-by: Jonas Gorski <jogo@openwrt.org> Cc: linux-mips@linux-mips.org Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Jayachandran C <jchandra@broadcom.com> Cc: David Daney <david.daney@cavium.com> Patchwork: https://patchwork.linux-mips.org/patch/5539/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: SNI: pcit: Fix build error with CONFIG_PCI=n disabled.Ralf Baechle2013-06-251-7/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | CC arch/mips/sni/pcit.o arch/mips/sni/pcit.c:150:30: warning: ‘sni_pcit_controller’ defined but not used [-Wunused-variable] Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: SNI: pcimt: Guard sni_controller with CONFIG_PCIMarkos Chandras2013-06-251-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes the following build problem: arch/mips/sni/pcimt.c:188:30: error: 'sni_controller' defined but not used [-Werror=unused-variable] Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Acked-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5547/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: Sibyte: Platform: Add load address for CONFIG_SIBYTE_LITTLESURMarkos Chandras2013-06-251-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes the following build problem: mips-linux-gnu-ld:arch/mips/kernel/vmlinux.lds:253: syntax error because VMLINUX_LOAD_ADDRESS was an empty string for that platform so the vmlinux.lds.S created an invalid section entry on line 50. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Acked-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: sibyte-users@bitmover.com Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5548/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: microMIPS: Fix POOL16C minor opcode enumTony Wu2013-06-211-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As pointed out by Maciej, POOL16C minor opcodes were mostly shifted by one bit. Correct those opcodes, and also add jraddiusp to the enum. Signed-off-by: Tony Wu <tung7970@gmail.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Acked-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: david.daney@cavium.com Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5527/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: Fix TLBR-use hazards for R2 cores in the TLB reload handlersRalf Baechle2013-06-211-0/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MIPS R2 documents state that an execution hazard barrier is needed after a TLBR before reading EntryLo. Original patch by Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/5526/
| | * | MIPS: Fix rtlx build error.Ralf Baechle2013-06-211-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CC arch/mips/kernel/rtlx.o /home/ralf/src/linux/upstream-sfr/arch/mips/kernel/rtlx.c: In function ‘file_write’: /home/ralf/src/linux/upstream-sfr/arch/mips/kernel/rtlx.c:439:23: error: unused variable ‘rt’ [-Werror=unused-variable] /home/ralf/src/linux/upstream-sfr/arch/mips/kernel/rtlx.c: In function ‘rtlx_module_init’: /home/ralf/src/linux/upstream-sfr/arch/mips/kernel/rtlx.c:523:3: error: implicit declaration of function ‘set_vi_handler’ [-Werror=implicit-function-declaration] cc1: all warnings being treated as errors Caused by 496ad9aa8ef448058e36ca7a787c61f2e63f0f54 [new helper: file_inode(file)]. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: BCM63XX: remove bogus Kconfig selectsFlorian Fainelli2013-06-211-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the bogus selects on USB-related symbols for 6345 and 6338, not only we do not yet support USB on BCM63XX, but they also cause the following warnings: warning: (BCM63XX_CPU_6338 && BCM63XX_CPU_6345) selects USB_OHCI_BIG_ENDIAN_MMIO which has unmet direct dependencies (USB_SUPPORT && USB && USB_OHCI_HCD) warning: (BCM63XX_CPU_6338 && BCM63XX_CPU_6345) selects USB_OHCI_BIG_ENDIAN_DESC which has unmet direct dependencies (USB_SUPPORT && USB && USB_OHCI_HCD) make[4]: Leaving directory `/home/florian/dev/linux' Just get rid of these bogus Kconfig selects because neither 6345 nor 6338 actually have built-in USB host controllers. Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Cc: cernekee@gmail.com Cc: jogo@openwrt.org Patchwork: http://patchwork.linux-mips.org/patch/5497/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: Fix execution hazard during watchpoint register probePaul Burton2013-06-211-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Writing a value to a WatchLo* register creates an execution hazard, so if its value is then read before that hazard is cleared then said value may be invalid. The mips_probe_watch_registers function must therefore clear the execution hazard between setting the match bits in a WatchLo* register & reading the register back in order to check which are set. This fixes intermittent incorrect watchpoint register probing on some MIPS cores such as interAptiv & proAptiv. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Acked-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/5474/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: powertv: Drop SYS_HAS_EARLY_PRINTKMarkos Chandras2013-06-211-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PowerTV does not provide a prom_putchar function needed for early printk so remove this symbol for this platform. Fixes the following problem when EARLY_PRINTK is enabled for powertv: arch/mips/kernel/early_printk.c:24: undefined reference to `prom_putchar' arch/mips/kernel/early_printk.c:23: undefined reference to `prom_putchar' Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Acked-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5477/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: sibyte: Amend dependencies for SIBYTE_BUS_WATCHERMarkos Chandras2013-06-211-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SIBYTE_BUS_WATCHER is only visible if CONFIG_SIBYTE_BCM112X or CONFIG_SIBYTE_SB1250 is selected according to the arch/mips/sibyte/Makefile. This fixes the following build problem: arch/mips/mm/cerr-sb1.c:254: undefined reference to `check_bus_watcher' Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Acked-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: sibyte-users@bitmover.com Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5482/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: Sibyte: Fix bus watcher build for BCM1x55 and BCM1x80.Ralf Baechle2013-06-213-2/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CC arch/mips/sibyte/bcm1480/bus_watcher.o CHK kernel/config_data.h arch/mips/sibyte/bcm1480/bus_watcher.c: In function ‘check_bus_watcher’: arch/mips/sibyte/bcm1480/bus_watcher.c:86:82: error: ‘A_SCD_BUS_ERR_STATUS_DEBUG’ undeclared (first use in this function) arch/mips/sibyte/bcm1480/bus_watcher.c:86:82: note: each undeclared identifier is reported only once for each function it appears in make[3]: *** [arch/mips/sibyte/bcm1480/bus_watcher.o] Error 1 make[2]: *** [arch/mips/sibyte/bcm1480] Error 2 make[1]: *** [arch/mips/sibyte] Error 2 make: *** [arch/mips] Error 2 The register moved around though it's otherwise the same but because of the changed address it now also has a different name. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/5514/ Reported-by: Markos Chandras <markos.chandras@imgtec.com>
| | * | MIPS: Sibyte: Fix build for SIBYTE_BW_TRACE on BCM1x55 and BCM1x80.Ralf Baechle2013-06-211-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CC arch/mips/mm/cerr-sb1.o arch/mips/mm/cerr-sb1.c: In function ‘sb1_cache_error’: arch/mips/mm/cerr-sb1.c:186:98: error: ‘M_BCM1480_SCD_TRACE_CFG_FREEZE’ undeclared (first use in this function) arch/mips/mm/cerr-sb1.c:186:98: note: each undeclared identifier is reported only once for each function it appears in make[1]: *** [arch/mips/mm/cerr-sb1.o] Error 1 This happens because 8deab1144b553548fb2f1b51affdd36dcd652aaa [[MIPS] Updated Sibyte headers] changed the headers but not all the users. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Reported-by: Markos Chandras <markos.chandras@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/5511/
| | * | MIPS: sibyte: Declare the cfe_write() buffer as constantMarkos Chandras2013-06-212-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The write() prototype expects a const char * as argument so declare it as such. Fixes the following build problem: arch/mips/sibyte/common/cfe_console.c:23:5: error: passing argument 2 of 'cfe_write' discards 'const' qualifier from pointer target type [-Werror] arch/mips/sibyte/common/cfe_console.c:34:4: error: passing argument 2 of 'cfe_write' makes pointer from integer without a cast [-Werror] Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Acked-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: sibyte-users@bitmover.com Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5485/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: Sibyte: Add missing sched.h headerMarkos Chandras2013-06-211-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It's needed for the TASK_INTERRUPTIBLE definition. Fixes the following build problem: arch/mips/sibyte/common/sb_tbprof.c:235:4: error: 'TASK_INTERRUPTIBLE' undeclared (first use in this function) [ralf@linux-mips.org: Ideally sched.h should be included into the actual user of TASK_INTERRUPTIBLE, <linux/wait.h> but that seems way too risky that close to a release.] Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Acked-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: sibyte-users@bitmover.com Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5479/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: sibyte: Remove unused variable.Markos Chandras2013-06-211-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes the following build problem: arch/mips/sibyte/sb1250/bus_watcher.c: In function 'sibyte_bw_int': arch/mips/sibyte/sb1250/bus_watcher.c:179:7: error: unused variable 'bw_buf' [-Werror=unused-variable] Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: sibyte-users@bitmover.com Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5481/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: ath79: Fix argument for the ap136_pc_init functionMarkos Chandras2013-06-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ap136_pci_init expects a u8 pointer as an argument. Fixes the following build problem on a randconfig: arch/mips/ath79/mach-ap136.c:151:2: error: too many arguments to function 'ap136_pci_init' Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5476/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS/OCTEON: Override default address space layout.David Daney2013-06-211-0/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | OCTEON II cannot execute code in the default CAC_BASE space, so we supply a value (0x8000000000000000) that does work. Signed-off-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5457/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: malta: Remove software reset defines from generic header.Steven J. Hill2013-06-212-30/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the software reset register and reset value definitions from the 'include/asm/mips-boards/generic.h' header file. Also clean up header and whitespace in platform file. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5456/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: malta: Move defines of reset registers and values.Steven J. Hill2013-06-211-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove usage of 'include/asm/mips-boards/generic.h' header file. Instead, move the defines for SOFTRES_REG and GORESET local to the platform file. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5455/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: sead3: Fix ability to perform a soft reset.Steven J. Hill2013-06-211-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The soft reset register address and reset value to be written are incorrect for the SEAD-3 platform. This patch fixes them such that the SEAD-3 can actually perform a soft reset instead of causing an exception. Also remove usage of 'include/asm/mips-boards/generic.h' header file. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5454/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: Loongson: Fix random early boot hangAaro Koskinen2013-06-211-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some Loongson boards (e.g. Lemote FuLoong mini-PC) use ISA/southbridge device (CS5536 general purpose timer) for the timer interrupt. It starts running early and is already enabled during the PCI configuration, during which there is a small window in pci_read_base() when the register access is temporarily disabled. If the timer interrupts at this point, the system will hang. Fix this by adding a fixup that keeps the register access always enabled. The hang the patch fixes usually looks like this: [ 0.844000] pci 0000:00:0e.0: [1022:2090] type 00 class 0x060100 [ 0.848000] pci 0000:00:0e.0: reg 10: [io 0xb410-0xb417] [ 0.852000] pci 0000:00:0e.0: reg 14: [io 0xb000-0xb0ff] [ 0.856000] pci 0000:00:0e.0: reg 18: [io 0xb380-0xb3bf] [ 28.140000] BUG: soft lockup - CPU#0 stuck for 23s! [swapper:1] [ 28.140000] Modules linked in: [ 28.140000] irq event stamp: 37965 [ 28.140000] hardirqs last enabled at (37964): [<ffffffff80204c0c>] restore_partial+0x6c/0x13c [ 28.140000] hardirqs last disabled at (37965): [<ffffffff80204f8c>] handle_int+0x144/0x15c [ 28.140000] softirqs last enabled at (24316): [<ffffffff802381f4>] __do_softirq+0x1cc/0x258 [ 28.140000] softirqs last disabled at (24327): [<ffffffff80238420>] do_softirq+0xc8/0xd0 [ 28.140000] Cpu 0 [ 28.140000] $ 0 : 0000000000000000 00000000140044e1 980000009f090000 0000000000000001 [ 28.140000] $ 4 : 980000009f090000 0000000000000000 0000000000000100 03b7fff87fbde011 [ 28.140000] $ 8 : ffffffff812b1928 000000000001e000 043ffff87fbde011 fffffff87fbde011 [ 28.140000] $12 : 000000000000000e ffffffff807a0000 0000000000000698 0000000000000000 [ 28.140000] $16 : 0000000000000002 ffffffff81055e20 ffffffff80786810 0000000000000000 [ 28.140000] $20 : 000000000000000a ffffffff807bc244 ffffffff807e6350 ffffffff80770000 [ 28.140000] $24 : 0000000000000d80 00000000fffedbe0 [ 28.140000] $28 : 980000009f07c000 980000009f07fa10 ffffffff81050000 ffffffff802380f8 [ 28.140000] Hi : 0000000000d0fc00 [ 28.140000] Lo : 0000000000f82b40 [ 28.140000] epc : ffffffff8023810c __do_softirq+0xe4/0x258 [ 28.140000] Not tainted [ 28.140000] ra : ffffffff802380f8 __do_softirq+0xd0/0x258 [ 28.140000] Status: 140044e3 KX SX UX KERNEL EXL IE [ 28.140000] Cause : 10008400 [ 28.140000] PrId : 00006303 (ICT Loongson-2) Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/4958/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: Octeon: Don't clobber bootloader data structures.David Daney2013-06-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit abe77f90dc (MIPS: Octeon: Add kexec and kdump support) added a bootmem region for the kernel image itself. The problem is that this is rounded up to a 0x100000 boundary, which is memory that may not be owned by the kernel. Depending on the kernel's configuration based size, this 'extra' memory may contain data passed from the bootloader to the kernel itself, which if clobbered makes the kernel crash in various ways. The fix: Quit rounding the size up, so that we only use memory assigned to the kernel. Signed-off-by: David Daney <david.daney@cavium.com> Cc: <stable@vger.kernel.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5449/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: IP27: Fix build error if CONFIG_PCI=y and CONFIG_NUMA disabled.Ralf Baechle2013-06-211-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Then <asm-generic/topology.h> will define cpp macro as default definition for pcibus_to_node resulting in: CC arch/mips/pci/pci-ip27.o arch/mips/pci/pci-ip27.c:220:7: error: expected identifier or ‘(’ before ‘void’ arch/mips/pci/pci-ip27.c:220:12: error: expected ‘)’ before ‘(’ token make[1]: *** [arch/mips/pci/pci-ip27.o] Error 1 Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: IP27: Fix build errors with CONFIG_PCI disabled.Ralf Baechle2013-06-211-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | LD init/built-in.o arch/mips/built-in.o: In function `xtalk_probe_node': (.cpuinit.text+0x67c): undefined reference to `bridge_probe' arch/mips/built-in.o: In function `xtalk_probe_node': (.cpuinit.text+0x7d8): undefined reference to `bridge_probe' Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: IP27: Fix build errors with CONFIG_PCI disabled.Ralf Baechle2013-06-213-214/+267
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | LD init/built-in.o arch/mips/built-in.o: In function `startup_bridge_irq': ip27-irq.c:(.text+0x434): undefined reference to `irq_to_slot' ip27-irq.c:(.text+0x43c): undefined reference to `irq_to_slot' ip27-irq.c:(.text+0x460): undefined reference to `irq_to_bridge' ip27-irq.c:(.text+0x464): undefined reference to `irq_to_bridge' arch/mips/built-in.o: In function `shutdown_bridge_irq': ip27-irq.c:(.text+0x564): undefined reference to `irq_to_bridge' ip27-irq.c:(.text+0x56c): undefined reference to `irq_to_bridge' ip27-irq.c:(.text+0x5a0): undefined reference to `irq_to_slot' ip27-irq.c:(.text+0x5a4): undefined reference to `irq_to_slot' Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: IP27: Fix build error with CONFIG_MAPPED_KERNELRalf Baechle2013-06-211-2/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some of the TLB bit definitions in <asm/pgtable-bits.h> have become rather complex and are no longer usable from assembler resulting in an explosion like this: AS arch/mips/kernel/head.o arch/mips/kernel/head.S: Assembler messages: arch/mips/kernel/head.S:147: Error: missing ')' arch/mips/kernel/head.S:147: Error: missing ')' arch/mips/kernel/head.S:147: Error: missing ')' arch/mips/kernel/head.S:147: Error: missing ')' arch/mips/kernel/head.S:147: Error: missing ')' arch/mips/kernel/head.S:147: Error: missing ')' arch/mips/kernel/head.S:147: Error: missing ')' arch/mips/kernel/head.S:147: Error: missing ')' arch/mips/kernel/head.S:147: Error: missing ')' arch/mips/kernel/head.S:147: Error: missing ')' arch/mips/kernel/head.S:147: Error: missing ')' arch/mips/kernel/head.S:147: Error: missing ')' arch/mips/kernel/head.S:147: Error: missing ')' arch/mips/kernel/head.S:147: Error: missing ')' arch/mips/kernel/head.S:147: Error: missing ')' arch/mips/kernel/head.S:147: Error: Illegal operands `li $12,(((1<<((cpu_has_rixi?(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1))))+1:(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))))+1))|(1<<(((cpu_has_rixi?(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1))))+1:(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))))+1)+1))|(5<<(((((cpu_has_rixi?(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1))))+1:(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))))+1)+1)+1)+1)))>>6)' arch/mips/kernel/head.S:147: Error: missing ')' arch/mips/kernel/head.S:147: Error: missing ')' arch/mips/kernel/head.S:147: Error: missing ')' arch/mips/kernel/head.S:147: Error: missing ')' arch/mips/kernel/head.S:147: Error: missing ')' arch/mips/kernel/head.S:147: Error: missing ')' arch/mips/kernel/head.S:147: Error: missing ')' arch/mips/kernel/head.S:147: Error: missing ')' arch/mips/kernel/head.S:147: Error: missing ')' arch/mips/kernel/head.S:147: Error: missing ')' arch/mips/kernel/head.S:147: Error: missing ')' arch/mips/kernel/head.S:147: Error: missing ')' arch/mips/kernel/head.S:147: Error: missing ')' arch/mips/kernel/head.S:147: Error: missing ')' arch/mips/kernel/head.S:147: Error: missing ')' arch/mips/kernel/head.S:147: Error: Illegal operands `li $12,(((1<<((cpu_has_rixi?(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1))))+1:(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))))+1))|(1<<(((cpu_has_rixi?(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1))))+1:(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))))+1)+1))|(1<<((((cpu_has_rixi?(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1))))+1:(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))))+1)+1)+1))|(5<<(((((cpu_has_rixi?(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1))))+1:(cpu_has_rixi?((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))+1:((((((cpu_has_rixi?(0):(0)+1)+1)+1)+1)))))+1)+1)+1)+1)))>>6)' make[2]: *** [arch/mips/kernel/head.o] Error 1 Since now MAPPED_KERNEL_SETUP_TLB is in platform-specific code it's safe to hardcode the TLB bits there. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: Move gas macro MAPPED_KERNEL_SETUP_TLB to IP27-specific code.Ralf Baechle2013-06-212-39/+39
| | | | | | | | | | | | | | | | | | | | | | | | It's IP27-specific and can only cause trouble in head.S. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: Octeon: Fix build error if CONFIG_MTD=nRalf Baechle2013-06-201-1/+2
| | | | | | | | | | | | | | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: Octeon: Fix build error if CONFIG_BUG=nDavid Daney2013-06-181-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CC init/do_mounts.o In file included from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/dma-mapping.h:10:0, from include/linux/dma-mapping.h:76, from include/linux/skbuff.h:33, from include/linux/icmpv6.h:4, from include/linux/ipv6.h:59, from include/net/ipv6.h:16, from include/linux/sunrpc/clnt.h:26, from include/linux/nfs_fs.h:30, from init/do_mounts.c:30: /home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_map_dma_mem’: /home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:24:1: warning: no return statement in function returning non-void [-Wreturn-type] /home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_map_dma_mem_page’: /home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:30:1: warning: no return statement in function returning non-void [-Wreturn-type] /home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_addr_to_phys’: /home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:36:1: warning: no return statement in function returning non-void [-Wreturn-type] /home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_supported’: /home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:47:1: warning: no return statement in function returning non-void [-Wreturn-type] /home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_mapping_error’: /home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:63:1: warning: no return statement in function returning non-void [-Wreturn-type] LD init/mounts.o CC init/init_task.o In file included from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/dma-mapping.h:10:0, from include/linux/dma-mapping.h:76, from include/linux/skbuff.h:33, from include/linux/netfilter.h:5, from include/net/netns/netfilter.h:5, from include/net/net_namespace.h:20, from include/linux/init_task.h:14, from init/init_task.c:1: /home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_map_dma_mem’: /home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:24:1: warning: no return statement in function returning non-void [-Wreturn-type] /home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_map_dma_mem_page’: /home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:30:1: warning: no return statement in function returning non-void [-Wreturn-type] /home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_addr_to_phys’: /home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:36:1: warning: no return statement in function returning non-void [-Wreturn-type] /home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_supported’: /home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:47:1: warning: no return statement in function returning non-void [-Wreturn-type] /home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_mapping_error’: /home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:63:1: warning: no return statement in function returning non-void [-Wreturn-type] LD init/built-in.o CC arch/mips/cavium-octeon/setup.o In file included from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/dma-mapping.h:10:0, from include/linux/dma-mapping.h:76, from include/asm-generic/pci-dma-compat.h:7, from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/pci.h:129, from include/linux/pci.h:1451, from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/octeon/pci-octeon.h:12, from arch/mips/cavium-octeon/setup.c:41: /home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_map_dma_mem’: /home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:24:1: error: no return statement in function returning non-void [-Werror=return-type] /home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_map_dma_mem_page’: /home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:30:1: error: no return statement in function returning non-void [-Werror=return-type] /home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_addr_to_phys’: /home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:36:1: error: no return statement in function returning non-void [-Werror=return-type] /home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_supported’: /home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:47:1: error: no return statement in function returning non-void [-Werror=return-type] /home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_mapping_error’: /home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:63:1: error: no return statement in function returning non-void [-Werror=return-type] cc1: all warnings being treated as errors make[2]: *** [arch/mips/cavium-octeon/setup.o] Error 1 make[1]: *** [arch/mips/cavium-octeon] Error 2 make: *** [arch/mips] Error 2 [ralf@linux-mips.org: while at it, also include <linux/bug.h> directly.] Signed-off-by: David Daney <david.daney@cavium.com> Patchwork: https://patchwork.linux-mips.org/patch/5519/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: Oceton: Fix build error.Ralf Baechle2013-06-181-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If CONFIG_CAVIUM_OCTEON_LOCK_L2_TLB, CONFIG_CAVIUM_OCTEON_LOCK_L2_EXCEPTION, CONFIG_CAVIUM_OCTEON_LOCK_L2_LOW_LEVEL_INTERRUPT and CONFIG_CAVIUM_OCTEON_LOCK_L2_INTERRUPT are all undefined: arch/mips/cavium-octeon/setup.c: In function ‘prom_init’: arch/mips/cavium-octeon/setup.c:715:12: error: unused variable ‘ebase’ [-Werror=unused-variable] Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: <uapi/asm/siginfo.h>: Don't reference CONFIG_* symbols.Ralf Baechle2013-06-181-2/+2
| | | | | | | | | | | | | | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: <uapi/asm/msgbuf.h>: Don't reference CONFIG_* symbols.Ralf Baechle2013-06-181-6/+6
| | | | | | | | | | | | | | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: <uapi/asm/swab.h>: Don't reference CONFIG_* symbols.Ralf Baechle2013-06-181-6/+6
| | | | | | | | | | | | | | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: <uapi/asm/resource.h: Don't reference CONFIG_* symbols.Ralf Baechle2013-06-181-1/+1
| | | | | | | | | | | | | | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: <uapi/asm/fcntl.h>: Don't reference CONFIG_* symbols.Ralf Baechle2013-06-131-2/+4
| | | | | | | | | | | | | | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| | * | MIPS: Kconfig: Remove extranous help keyword.Ralf Baechle2013-06-131-1/+0
| | | | | | | | | | | | | | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | | MIPS: Kconfig: Add missing MODULES dependency to VPE_LOADERMarkos Chandras2013-07-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The vpe.c code uses the 'struct module' which is only available if CONFIG_MODULES is selected. Also fixes the following build problem on a lantiq allmodconfig: In file included from arch/mips/kernel/vpe.c:41:0: include/linux/moduleloader.h: In function 'apply_relocate': include/linux/moduleloader.h:48:63: error: dereferencing pointer to incomplete type include/linux/moduleloader.h: In function 'apply_relocate_add': include/linux/moduleloader.h:70:63: error: dereferencing pointer to incomplete type Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5562/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | | MIPS: BCM63xx: CLK: Add dummy clk_{set,round}_rate() functionsMarkos Chandras2013-07-021-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Several drivers use the clk_{set,round}_rate() functions that need to be defined in the platform's clock code. The Broadcom BCM63xx platform hardcodes the clock rate so we create new clk_{set,round}_rate() functions which just return 0 like those in include/linux/clk.h for the common clock framework do. Also fixes the following build problem on a randconfig: drivers/built-in.o: In function `nop_usb_xceiv_probe': phy-nop.c:(.text+0x3ec26c): undefined reference to `clk_set_rate' Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Acked-by: Steven J. Hill <Steven.Hill@imgtec.com> Acked-by: Florian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5580/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | | MIPS: SEAD3: Disable L2 cache on SEAD-3.Steven J. Hill2013-07-011-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The cores used on the SEAD-3 platform do not have L2 caches, so this option should not be turned on. Originally fixed on public 'linux-mti-3.8' release branch. Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5559/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | | MIPS: BCM63xx: Enable second core SMP on BCM6328 if availableJonas Gorski2013-07-013-1/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | BCM6328 has a OTP which tells us if the second core is available. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Cc: linux-mips@linux-mips.org Cc: John Crispin <blogic@openwrt.org> Cc: Maxime Bizon <mbizon@freebox.fr> Cc: Florian Fainelli <florian@openwrt.org> Cc: Kevin Cernekee <cernekee@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/5490/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | | MIPS: BCM63xx: Add SMP support to prom.cKevin Cernekee2013-07-011-0/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This involves two changes to the BSP code: 1) register_smp_ops() for BMIPS SMP 2) The CPU1 boot vector on some of the BCM63xx platforms conflicts with the special interrupt vector (IV). Move it to 0x8000_0380 at boot time, to resolve the conflict. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> [jogo@openwrt.org: moved SMP ops registration into ifdef guard, changed ifdef guards to if (IS_ENABLED())] Signed-off-by: Jonas Gorski <jogo@openwrt.org> Cc: linux-mips@linux-mips.org Cc: John Crispin <blogic@openwrt.org> Cc: Maxime Bizon <mbizon@freebox.fr> Cc: Florian Fainelli <florian@openwrt.org> Patchwork: https://patchwork.linux-mips.org/patch/5489/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | | MIPS: define write{b,w,l,q}_relaxedFlorian Fainelli2013-07-011-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MIPS does define read{b,w,l,q}_relaxed but does not define their write counterparts: write{b,w,l,q}_relaxed. This patch adds the missing definitions for the write*_relaxed I/O accessors. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Cc: cernekee@gmail.com Cc: jogo@openwrt.org Patchwork: https://patchwork.linux-mips.org/patch/5352/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | | MIPS: Expose missing pci_io{map,unmap} declarationsMarkos Chandras2013-07-012-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The GENERIC_PCI_IOMAP does not depend on CONFIG_PCI so move it to the CONFIG_MIPS symbol so it's always selected for MIPS. This fixes the missing pci_iomap declaration for MIPS. Moreover, the pci_iounmap function was not defined in the io.h header file if the CONFIG_PCI symbol is not set, but it should since MIPS is not using CONFIG_GENERIC_IOMAP. This fixes the following problem on a allyesconfig: drivers/net/ethernet/3com/3c59x.c:1031:2: error: implicit declaration of function 'pci_iomap' [-Werror=implicit-function-declaration] drivers/net/ethernet/3com/3c59x.c:1044:3: error: implicit declaration of function 'pci_iounmap' [-Werror=implicit-function-declaration] Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Acked-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5478/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
OpenPOWER on IntegriCloud