summaryrefslogtreecommitdiffstats
path: root/arch/mips/kernel/smp.c
Commit message (Collapse)AuthorAgeFilesLines
* MIPS: kernel: Audit and remove any unnecessary uses of module.hPaul Gortmaker2016-10-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Historically a lot of these existed because we did not have a distinction between what was modular code and what was providing support to modules via EXPORT_SYMBOL and friends. That changed when we forked out support for the latter into the export.h file. This means we should be able to reduce the usage of module.h in code that is obj-y Makefile or bool Kconfig. The advantage in doing so is that module.h itself sources about 15 other headers; adding significantly to what we feed cpp, and it can obscure what headers we are effectively using. Since module.h was the source for init.h (for __init) and for export.h (for EXPORT_SYMBOL) we consider each obj-y/bool instance for the presence of either and replace as needed. In the case of the n32/o32 files, we have to get rid of a couple no-op MODULE_ tags to facilitate the module.h removal. They piggy back off the fs/ elf binary support, which is also a bool Kconfig. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14032/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: smp.c: Introduce mechanism for freeing and allocating IPIsMatt Redfearn2016-10-051-8/+53
| | | | | | | | | | | | | | | | | | | | | | | | | | | | For the MIPS remote processor implementation, we need additional IPIs to talk to the remote processor. Since MIPS GIC reserves exactly the right number of IPI IRQs required by Linux for the number of VPs in the system, this is not possible without releasing some recources. This commit introduces mips_smp_ipi_allocate() which allocates IPIs to a given cpumask. It is called as normal with the cpu_possible_mask at bootup to initialise IPIs to all CPUs. mips_smp_ipi_free() may then be used to free IPIs to a subset of those CPUs so that their hardware resources can be reused. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Lisa Parratt <Lisa.Parratt@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Qais Yousef <qsyousef@gmail.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-remoteproc@vger.kernel.org Cc: lisa.parratt@imgtec.com Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14285/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: SMP: Wrap call to mips_cpc_lock_other in mips_cm_lock_otherMatt Redfearn2016-10-041-0/+2
| | | | | | | | | | | | | | | | | All calls to mips_cpc_lock_other should be wrapped in mips_cm_lock_other. This only matters if the system has CM3 and is using cpu idle, since otherwise a) the CPC lock is sufficent for CM < 3 and b) any systems with CM > 3 have not been able to use cpu idle until now. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Reviewed-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Thomas Gleixner <tglx@linutronix.de> Cc: James Hogan <james.hogan@imgtec.com> Cc: Qais Yousef <qsyousef@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/14227/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: SMP: Fix possibility of deadlock when bringing CPUs onlineMatt Redfearn2016-09-251-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes the possibility of a deadlock when bringing up secondary CPUs. The deadlock occurs because the set_cpu_online() is called before synchronise_count_slave(). This can cause a deadlock if the boot CPU, having scheduled another thread, attempts to send an IPI to the secondary CPU, which it sees has been marked online. The secondary is blocked in synchronise_count_slave() waiting for the boot CPU to enter synchronise_count_master(), but the boot cpu is blocked in smp_call_function_many() waiting for the secondary to respond to it's IPI request. Fix this by marking the CPU online in cpu_callin_map and synchronising counters before declaring the CPU online and calculating the maps for IPIs. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Reported-by: Justin Chen <justinpopo6@gmail.com> Tested-by: Justin Chen <justinpopo6@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: stable@vger.kernel.org # v4.1+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14302/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: c-r4k: Exclude sibling CPUs in SMP callsJames Hogan2016-07-291-2/+4
| | | | | | | | | | | | | | | | | | | | | | | When performing SMP calls to foreign cores, exclude sibling CPUs from the provided map, as we already handle the local core on the current CPU. This prevents an SMP call from for example core 0, VPE 1 to VPE 0 on the same core. In the process the cpu_foreign_map cpumask is turned into an array of cpumasks, so that each CPU has its own version of it which excludes sibling CPUs. r4k_op_needs_ipi() is also updated to reflect that cache management SMP calls are not needed when all CPUs are siblings (i.e. there are no foreign CPUs according to the new cpu_foreign_map[] semantics which exclude siblings). Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com> Cc: Felix Fietkau <nbd@nbd.name> Cc: Jayachandran C. <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13801/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: SMP: Drop stop_this_cpu() cpu_foreign_map hackJames Hogan2016-07-291-8/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit cccf34e9411c ("MIPS: c-r4k: Fix cache flushing for MT cores") added the cpu_foreign_map cpumask containing a single VPE from each online core, and recalculated it when secondary CPUs are brought up. stop_this_cpu() was also updated to recalculate cpu_foreign_map, but with an additional hack before marking the CPU as offline to copy cpu_online_mask into cpu_foreign_map and perform an SMP memory barrier. This appears to have been intended to prevent cache management IPIs being missed when the VPE representing the core in cpu_foreign_map is taken offline while other VPEs remain online. Unfortunately there is nothing in this hack to prevent r4k_on_each_cpu() from reading the old cpu_foreign_map, and smp_call_function_many() from reading that new cpu_online_mask with the core's representative VPE marked offline. It then wouldn't send an IPI to any online VPEs of that core. stop_this_cpu() is only actually called in panic and system shutdown / halt / reboot situations, in which case all CPUs are going down and we don't really need to care about cache management, so drop this hack. Note that the __cpu_disable() case for CPU hotplug is handled in the previous commit, and no synchronisation is needed there due to the use of stop_machine() which prevents hotplug from taking place while any CPU has disabled preemption (as r4k_on_each_cpu() does). Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13796/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: SMP: Update cpu_foreign_map on CPU disableJames Hogan2016-07-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | When a CPU is disabled via CPU hotplug, cpu_foreign_map is not updated. This could result in cache management SMP calls being sent to offline CPUs instead of online siblings in the same core. Add a call to calculate_cpu_foreign_map() in the various MIPS cpu disable callbacks after set_cpu_online(). All cases are updated for consistency and to keep cpu_foreign_map strictly up to date, not just those which may support hardware multithreading. Fixes: cccf34e9411c ("MIPS: c-r4k: Fix cache flushing for MT cores") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: David Daney <david.daney@cavium.com> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: Hongliang Tao <taohl@lemote.com> Cc: Hua Yan <yanh@lemote.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13799/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: SMP: Clear ASID without confusing has_valid_asid()James Hogan2016-07-291-2/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The SMP flush_tlb_*() functions may clear the memory map's ASIDs for other CPUs if the mm has only a single user (the current CPU) in order to avoid SMP calls. However this makes it appear to has_valid_asid(), which is used by various cache flush functions, as if the CPUs have never run in the mm, and therefore can't have cached any of its memory. For flush_tlb_mm() this doesn't sound unreasonable. flush_tlb_range() corresponds to flush_cache_range() which does do full indexed cache flushes, but only on the icache if the specified mapping is executable, otherwise it doesn't guarantee that there are no cache contents left for the mm. flush_tlb_page() corresponds to flush_cache_page(), which will perform address based cache ops on the specified page only, and also only touches the icache if the page is executable. It does not guarantee that there are no cache contents left for the mm. For example, this affects flush_cache_range() which uses the has_valid_asid() optimisation. It is required to flush the icache when mappings are made executable (e.g. using mprotect) so they are immediately usable. If some code is changed to non executable in order to be modified then it will not be flushed from the icache during that time, but the ASID on other CPUs may still be cleared for TLB flushing. When the code is changed back to executable, flush_cache_range() will assume the code hasn't run on those other CPUs due to the zero ASID, and won't invalidate the icache on them. This is fixed by clearing the other CPUs ASIDs to 1 instead of 0 for the above two flush_tlb_*() functions when the corresponding cache flushes are likely to be incomplete (non executable range flush, or any page flush). This ASID appears valid to has_valid_asid(), but still triggers ASID regeneration due to the upper ASID version bits being 0, which is less than the minimum ASID version of 1 and so always treated as stale. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13795/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Don't BUG_ON when no IPI domain is foundPaul Burton2016-05-091-13/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit fbde2d7d8290 ("MIPS: Add generic SMP IPI support") introduced code that BUG_ON's in the case of a kernel that supports IPI domains but does not have one at runtime. This case is possible on Malta where for IPIs we may use either the GIC (which has an IPI IRQ domain implementation) or core-local software interrupts between VPEs (which do not currently have an IPI IRQ domain implementation). We can not know which will be used until runtime when we know whether a GIC is actually present, and if we run on a system with multiple VPEs and no GIC then the BUG_ON is hit. Commit 19fb5818ed60 ("IPS: Fix broken malta qemu") worked around this for the single-core single-VPE case typically seen using QEMU, but does not catch the multi-VPE case. This patch removes the insufficient CPU presence check that was added and works around the bug differently, effectively reverting that commit. A simple way to reproduce this bug is by using QEMU, which partially implements the MT ASE but does not implement the GIC as of version 2.5. Using "-cpu 34Kf -smp 2" will present a system with 2 VPEs in one core & no GIC, hitting the BUG_ON. Given that we're post-merge-window on the way to v4.6, avoid this by just returning from mips_smp_ipi_init when no IPI IRQ domain is found. Ideally at some point all IPI implementations would be converted to the same IPI IRQ domain interface & we'd be able to restore the check. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Qais Yousef <qsyousef@gmail.com> Fixes: fbde2d7d8290 ("MIPS: Add generic SMP IPI support") Fixes: 19fb5818ed60 ("IPS: Fix broken malta qemu") Reverts: 19fb5818ed60 ("IPS: Fix broken malta qemu") Cc: Qais Yousef <qsyousef@gmail.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Alex Smith <alex.smith@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13007/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Fix broken malta qemuQais Yousef2016-03-291-0/+12
| | | | | | | | | | | | | | | | | | | | Malta defconfig compiles with GIC on. Hence when compiling for SMP it causes the new IPI code to be activated. But on qemu malta there's no GIC causing a BUG_ON(!ipidomain) to be hit in mips_smp_ipi_init(). Since in that configuration one can only run a single core SMP (!), skip IPI initialisation if we detect that this is the case. It is a sensible behaviour to introduce and should keep such possible configuration to run rather than die hard unnecessarily. Signed-off-by: Qais Yousef <qsyousef@gmail.com> Reported-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12892/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* Merge branch 'smp-hotplug-for-linus' of ↵Linus Torvalds2016-03-151-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull cpu hotplug updates from Thomas Gleixner: "This is the first part of the ongoing cpu hotplug rework: - Initial implementation of the state machine - Runs all online and prepare down callbacks on the plugged cpu and not on some random processor - Replaces busy loop waiting with completions - Adds tracepoints so the states can be followed" More detailed commentary on this work from an earlier email: "What's wrong with the current cpu hotplug infrastructure? - Asymmetry The hotplug notifier mechanism is asymmetric versus the bringup and teardown. This is mostly caused by the notifier mechanism. - Largely undocumented dependencies While some notifiers use explicitely defined notifier priorities, we have quite some notifiers which use numerical priorities to express dependencies without any documentation why. - Control processor driven Most of the bringup/teardown of a cpu is driven by a control processor. While it is understandable, that preperatory steps, like idle thread creation, memory allocation for and initialization of essential facilities needs to be done before a cpu can boot, there is no reason why everything else must run on a control processor. Before this patch series, bringup looks like this: Control CPU Booting CPU do preparatory steps kick cpu into life do low level init sync with booting cpu sync with control cpu bring the rest up - All or nothing approach There is no way to do partial bringups. That's something which is really desired because we waste e.g. at boot substantial amount of time just busy waiting that the cpu comes to life. That's stupid as we could very well do preparatory steps and the initial IPI for other cpus and then go back and do the necessary low level synchronization with the freshly booted cpu. - Minimal debuggability Due to the notifier based design, it's impossible to switch between two stages of the bringup/teardown back and forth in order to test the correctness. So in many hotplug notifiers the cancel mechanisms are either not existant or completely untested. - Notifier [un]registering is tedious To [un]register notifiers we need to protect against hotplug at every callsite. There is no mechanism that bringup/teardown callbacks are issued on the online cpus, so every caller needs to do it itself. That also includes error rollback. What's the new design? The base of the new design is a symmetric state machine, where both the control processor and the booting/dying cpu execute a well defined set of states. Each state is symmetric in the end, except for some well defined exceptions, and the bringup/teardown can be stopped and reversed at almost all states. So the bringup of a cpu will look like this in the future: Control CPU Booting CPU do preparatory steps kick cpu into life do low level init sync with booting cpu sync with control cpu bring itself up The synchronization step does not require the control cpu to wait. That mechanism can be done asynchronously via a worker or some other mechanism. The teardown can be made very similar, so that the dying cpu cleans up and brings itself down. Cleanups which need to be done after the cpu is gone, can be scheduled asynchronously as well. There is a long way to this, as we need to refactor the notion when a cpu is available. Today we set the cpu online right after it comes out of the low level bringup, which is not really correct. The proper mechanism is to set it to available, i.e. cpu local threads, like softirqd, hotplug thread etc. can be scheduled on that cpu, and once it finished all booting steps, it's set to online, so general workloads can be scheduled on it. The reverse happens on teardown. First thing to do is to forbid scheduling of general workloads, then teardown all the per cpu resources and finally shut it off completely. This patch series implements the basic infrastructure for this at the core level. This includes the following: - Basic state machine implementation with well defined states, so ordering and prioritization can be expressed. - Interfaces to [un]register state callbacks This invokes the bringup/teardown callback on all online cpus with the proper protection in place and [un]installs the callbacks in the state machine array. For callbacks which have no particular ordering requirement we have a dynamic state space, so that drivers don't have to register an explicit hotplug state. If a callback fails, the code automatically does a rollback to the previous state. - Sysfs interface to drive the state machine to a particular step. This is only partially functional today. Full functionality and therefor testability will be achieved once we converted all existing hotplug notifiers over to the new scheme. - Run all CPU_ONLINE/DOWN_PREPARE notifiers on the booting/dying processor: Control CPU Booting CPU do preparatory steps kick cpu into life do low level init sync with booting cpu sync with control cpu wait for boot bring itself up Signal completion to control cpu In a previous step of this work we've done a full tree mechanical conversion of all hotplug notifiers to the new scheme. The balance is a net removal of about 4000 lines of code. This is not included in this series, as we decided to take a different approach. Instead of mechanically converting everything over, we will do a proper overhaul of the usage sites one by one so they nicely fit into the symmetric callback scheme. I decided to do that after I looked at the ugliness of some of the converted sites and figured out that their hotplug mechanism is completely buggered anyway. So there is no point to do a mechanical conversion first as we need to go through the usage sites one by one again in order to achieve a full symmetric and testable behaviour" * 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) cpu/hotplug: Document states better cpu/hotplug: Fix smpboot thread ordering cpu/hotplug: Remove redundant state check cpu/hotplug: Plug death reporting race rcu: Make CPU_DYING_IDLE an explicit call cpu/hotplug: Make wait for dead cpu completion based cpu/hotplug: Let upcoming cpu bring itself fully up arch/hotplug: Call into idle with a proper state cpu/hotplug: Move online calls to hotplugged cpu cpu/hotplug: Create hotplug threads cpu/hotplug: Split out the state walk into functions cpu/hotplug: Unpark smpboot threads from the state machine cpu/hotplug: Move scheduler cpu_online notifier to hotplug core cpu/hotplug: Implement setup/removal interface cpu/hotplug: Make target state writeable cpu/hotplug: Add sysfs state interface cpu/hotplug: Hand in target state to _cpu_up/down cpu/hotplug: Convert the hotplugged cpu work to a state machine cpu/hotplug: Convert to a state machine for the control processor cpu/hotplug: Add tracepoints ...
| * arch/hotplug: Call into idle with a proper stateThomas Gleixner2016-03-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Let the non boot cpus call into idle with the corresponding hotplug state, so the hotplug core can handle the further bringup. That's a first step to convert the boot side of the hotplugged cpus to do all the synchronization with the other side through the state machine. For now it'll only start the hotplug thread and kick the full bringup of the cpu. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.614102639@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* | Merge branch 'irq-core-for-linus' of ↵Linus Torvalds2016-03-151-0/+136
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "The 4.6 pile of irq updates contains: - Support for IPI irqdomains to support proper integration of IPIs to and from coprocessors. The first user of this new facility is MIPS. The relevant MIPS patches come with the core to avoid merge ordering issues and have been acked by Ralf. - A new command line option to set the default interrupt affinity mask at boot time. - Support for some more new ARM and MIPS interrupt controllers: tango, alpine-msix and bcm6345-l1 - Two small cleanups for x86/apic which we merged into irq/core to avoid yet another branch in x86 with two tiny commits. - The usual set of updates, cleanups in drivers/irqchip. Mostly in the area of ARM-GIC, arada-37-xp and atmel chips. Nothing outstanding here" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (56 commits) irqchip/irq-alpine-msi: Release the correct domain on error irqchip/mxs: Fix error check of of_io_request_and_map() irqchip/sunxi-nmi: Fix error check of of_io_request_and_map() genirq: Export IRQ functions for module use irqchip/gic/realview: Support more RealView DCC variants Documentation/bindings: Document the Alpine MSIX driver irqchip: Add the Alpine MSIX interrupt controller irqchip/gic-v3: Always return IRQ_SET_MASK_OK_DONE in gic_set_affinity irqchip/gic-v3-its: Mark its_init() and its children as __init irqchip/gic-v3: Remove gic_root_node variable from the ITS code irqchip/gic-v3: ACPI: Add redistributor support via GICC structures irqchip/gic-v3: Add ACPI support for GICv3/4 initialization irqchip/gic-v3: Refactor gic_of_init() for GICv3 driver x86/apic: Deinline _flat_send_IPI_mask, save ~150 bytes x86/apic: Deinline __default_send_IPI_*, save ~200 bytes dt-bindings: interrupt-controller: Add SoC-specific compatible string to Marvell ODMI irqchip/mips-gic: Add new DT property to reserve IPIs MIPS: Delete smp-gic.c MIPS: Make smp CMP, CPS and MT use the new generic IPI functions MIPS: Add generic SMP IPI support ...
| * | MIPS: Add generic SMP IPI supportQais Yousef2016-02-251-0/+136
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the new generic IPI layer to provide generic SMP IPI support if the irqchip supports it. Signed-off-by: Qais Yousef <qais.yousef@imgtec.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Cc: <jason@lakedaemon.net> Cc: <marc.zyngier@arm.com> Cc: <jiang.liu@linux.intel.com> Cc: <linux-mips@linux-mips.org> Cc: <lisa.parratt@imgtec.com> Cc: Qais Yousef <qsyousef@gmail.com> Link: http://lkml.kernel.org/r/1449580830-23652-17-git-send-email-qais.yousef@imgtec.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* | MIPS: smp.c: Fix uninitialised temp_foreign_mapJames Hogan2016-03-131-0/+1
|/ | | | | | | | | | | | | | | | | | | When calculate_cpu_foreign_map() recalculates the cpu_foreign_map cpumask it uses the local variable temp_foreign_map without initialising it to zero. Since the calculation only ever sets bits in this cpumask any existing bits at that memory location will remain set and find their way into cpu_foreign_map too. This could potentially lead to cache operations suboptimally doing smp calls to multiple VPEs in the same core, even though the VPEs share primary caches. Therefore initialise temp_foreign_map using cpumask_clear() before use. Fixes: cccf34e9411c ("MIPS: c-r4k: Fix cache flushing for MT cores") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12759/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Initialise MAARs on secondary CPUsPaul Burton2015-09-271-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MAARs should be initialised on each CPU (or rather, core) in the system in order to achieve consistent behaviour & performance. Previously they have only been initialised on the boot CPU which leads to performance problems if tasks are later scheduled on a secondary CPU, particularly if those tasks make use of unaligned vector accesses where some CPUs don't handle any cases in hardware for non-speculative memory regions. Fix this by recording the MAAR configuration from the boot CPU and applying it to secondary CPUs as part of their bringup. Reported-by: Doug Gilmore <doug.gilmore@imgtec.com> Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: David Hildenbrand <dahi@linux.vnet.ibm.com> Cc: linux-kernel@vger.kernel.org Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: James Hogan <james.hogan@imgtec.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Hemmo Nieminen <hemmo.nieminen@iki.fi> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Patchwork: https://patchwork.linux-mips.org/patch/11239/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: SMP: Don't increment irq_count multiple times for call function IPIsAlex Smith2015-08-031-10/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | The majority of SMP platforms handle their IPIs through do_IRQ() which calls irq_{enter/exit}(). When a call function IPI is received, smp_call_function_interrupt() is called which also calls irq_{enter,exit}(), meaning irq_count is raised twice. When tick broadcasting is used (which is implemented via a call function IPI), this incorrectly causes all CPU idle time on the core receiving broadcast ticks to be accounted as time spent servicing IRQs, as account_process_tick() will account as such if irq_count is greater than 1. This results in 100% CPU usage being reported on a core which receives its ticks via broadcast. This patch removes the SMP smp_call_function_interrupt() wrapper which calls irq_{enter,exit}(). Platforms which handle their IPIs through do_IRQ() now call generic_smp_call_function_interrupt() directly to avoid incrementing irq_count a second time. Platforms which don't (loongson, sgi-ip27, sibyte) call generic_smp_call_function_interrupt() wrapped in irq_{enter,exit}(). Signed-off-by: Alex Smith <alex.smith@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10770/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: c-r4k: Fix cache flushing for MT coresMarkos Chandras2015-07-101-1/+43
| | | | | | | | | | | | | | | | | | | | | MT_SMP is not the only SMP option for MT cores. The MT_SMP option allows more than one VPE per core to appear as a secondary CPU in the system. Because of how CM works, it propagates the address-based cache ops to the secondary cores but not the index-based ones. Because of that, the code does not use IPIs to flush the L1 caches on secondary cores because the CM would have done that already. However, the CM functionality is independent of the type of SMP kernel so even in non-MT kernels, IPIs are not necessary. As a result of which, we change the conditional to depend on the CM presence. Moreover, since VPEs on the same core share the same L1 caches, there is no need to send an IPI on all of them so we calculate a suitable cpumask with only one VPE per core. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: <stable@vger.kernel.org> # 3.15+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10654/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: SMP: Fix build error.Ralf Baechle2015-05-121-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CC arch/mips/kernel/smp.o arch/mips/kernel/smp.c: In function ‘start_secondary’: arch/mips/kernel/smp.c:149:2: error: passing argument 2 of ‘cpumask_set_cpu’ discards ‘volatile’ qualifier from pointer target type [-Werror] cpumask_set_cpu(cpu, &cpu_callin_map); ^ In file included from ./arch/mips/include/asm/processor.h:14:0, from ./arch/mips/include/asm/thread_info.h:15, from include/linux/thread_info.h:54, from include/asm-generic/preempt.h:4, from arch/mips/include/generated/asm/preempt.h:1, from include/linux/preempt.h:18, from include/linux/interrupt.h:8, from arch/mips/kernel/smp.c:24: include/linux/cpumask.h:272:91: note: expected ‘struct cpumask *’ but argument is of type ‘volatile struct cpumask_t *’ static inline void cpumask_set_cpu(unsigned int cpu, struct cpumask *dstp) ^ arch/mips/kernel/smp.c: In function ‘smp_prepare_boot_cpu’: arch/mips/kernel/smp.c:211:2: error: passing argument 2 of ‘cpumask_set_cpu’ discards ‘volatile’ qualifier from pointer target type [-Werror] cpumask_set_cpu(0, &cpu_callin_map); ^ In file included from ./arch/mips/include/asm/processor.h:14:0, from ./arch/mips/include/asm/thread_info.h:15, from include/linux/thread_info.h:54, from include/asm-generic/preempt.h:4, from arch/mips/include/generated/asm/preempt.h:1, from include/linux/preempt.h:18, from include/linux/interrupt.h:8, from arch/mips/kernel/smp.c:24: include/linux/cpumask.h:272:91: note: expected ‘struct cpumask *’ but argument is of type ‘volatile struct cpumask_t *’ static inline void cpumask_set_cpu(unsigned int cpu, struct cpumask *dstp) ^ arch/mips/kernel/smp.c: In function ‘__cpu_up’: arch/mips/kernel/smp.c:221:10: error: passing argument 2 of ‘cpumask_test_cpu’ discards ‘volatile’ qualifier from pointer target type [-Werror] while (!cpumask_test_cpu(cpu, &cpu_callin_map)) ^ In file included from ./arch/mips/include/asm/processor.h:14:0, from ./arch/mips/include/asm/thread_info.h:15, from include/linux/thread_info.h:54, from include/asm-generic/preempt.h:4, from arch/mips/include/generated/asm/preempt.h:1, from include/linux/preempt.h:18, from include/linux/interrupt.h:8, from arch/mips/kernel/smp.c:24: include/linux/cpumask.h:294:90: note: expected ‘const struct cpumask *’ but argument is of type ‘volatile struct cpumask_t *’ static inline int cpumask_test_cpu(int cpu, const struct cpumask *cpumask) ^ cc1: all warnings being treated as errors make[2]: *** [arch/mips/kernel/smp.o] Error 1 make[1]: *** [arch/mips/kernel] Error 2 make: *** [arch/mips] Error 2 Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* Merge tag 'cpumask-next-for-linus' of ↵Linus Torvalds2015-04-201-13/+13
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull final removal of deprecated cpus_* cpumask functions from Rusty Russell: "This is the final removal (after several years!) of the obsolete cpus_* functions, prompted by their mis-use in staging. With these function removed, all cpu functions should only iterate to nr_cpu_ids, so we finally only allocate that many bits when cpumasks are allocated offstack" * tag 'cpumask-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (25 commits) cpumask: remove __first_cpu / __next_cpu cpumask: resurrect CPU_MASK_CPU0 linux/cpumask.h: add typechecking to cpumask_test_cpu cpumask: only allocate nr_cpumask_bits. Fix weird uses of num_online_cpus(). cpumask: remove deprecated functions. mips: fix obsolete cpumask_of_cpu usage. x86: fix more deprecated cpu function usage. ia64: remove deprecated cpus_ usage. powerpc: fix deprecated CPU_MASK_CPU0 usage. CPU_MASK_ALL/CPU_MASK_NONE: remove from deprecated region. staging/lustre/o2iblnd: Don't use cpus_weight staging/lustre/libcfs: replace deprecated cpus_ calls with cpumask_ staging/lustre/ptlrpc: Do not use deprecated cpus_* functions blackfin: fix up obsolete cpu function usage. parisc: fix up obsolete cpu function usage. tile: fix up obsolete cpu function usage. arm64: fix up obsolete cpu function usage. mips: fix up obsolete cpu function usage. x86: fix up obsolete cpu function usage. ...
| * mips: fix up obsolete cpu function usage.Rusty Russell2015-03-051-13/+13
| | | | | | | | | | | | | | | | | | | | | | Thanks to spatch, plus manual removal of "&*". Then a sweep for for_each_cpu_mask => for_each_cpu. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: linux-mips@linux-mips.org
* | MIPS: smp: Make stop_this_cpu() actually stop the CPUAndrew Bresticker2015-04-011-4/+2
|/ | | | | | | | | | | | | | | | Since cpu_wait() enables interrupts upon return, CPUs which have entered stop_this_cpu() may still end up handling interrupts. This can lead to the softlockup detector firing on a panic or restart/poweroff/halt. Just disable interrupts and spin to ensure nothing else runs on the CPU once it has entered stop_this_cpu(). Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Cc: James Hogan <james.hogan@imgtec.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9601/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Fix kernel lockup or crash after CPU offline/onlineHemmo Nieminen2015-01-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | As printk() invocation can cause e.g. a TLB miss, printk() cannot be called before the exception handlers have been properly initialized. This can happen e.g. when netconsole has been loaded as a kernel module and the TLB table has been cleared when a CPU was offline. Call cpu_report() in start_secondary() only after the exception handlers have been initialized to fix this. Without the patch the kernel will randomly either lockup or crash after a CPU is onlined and the console driver is a module. Signed-off-by: Hemmo Nieminen <hemmo.nieminen@iki.fi> Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: stable@vger.kernel.org Cc: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8953/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Support CPU topology files in sysfsHuacai Chen2014-07-301-1/+25
| | | | | | | | | | | | | | | | | This patch is prepared for Loongson's NUMA support, it offer meaningful sysfs files such as physical_package_id, core_id, core_siblings and thread_siblings in /sys/devices/system/cpu/cpu?/topology. Signed-off-by: Huacai Chen <chenhc@lemote.com> Reviewed-by: Andreas Herrmann <andreas.herrmann@caviumnetworks.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/7184/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* Merge branch 'wip-mips-pm' of https://github.com/paulburton/linux into ↵Ralf Baechle2014-05-291-0/+47
|\ | | | | | | mips-for-linux-next
| * MIPS: introduce cpu_coherent_maskPaul Burton2014-05-021-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | Add a mask of CPUs which are currently known to be operating coherently. This is setup initially to be all present CPUs, but in a subsequent patch CPUs in a MIPS Coherent Processing System will be cleared in this mask as they enter non-coherent idle states. This will be used in order to determine when a CPU within a CPS system may need to be powered back up, but may also be used in future to optimise away wakeups for cache operations or TLB invalidations. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
| * MIPS: support for generic clockevents broadcastPaul Burton2014-05-021-0/+43
| | | | | | | | | | | | | | | | This patch adds support for generic clockevents broadcast using the a dummy clockevent device and the tick_broadcast function introduced by commit 12ad10004645 "clockevents: Add generic timer broadcast function". Signed-off-by: Paul Burton <paul.burton@imgtec.com>
* | MIPS: SMP: Remove plat_smp_ops cpus_done method.Ralf Baechle2014-05-271-1/+0
| | | | | | | | | | | | | | | | | | Nothing was using the method and there isn't any need for this hook. This leaves smp_cpus_done() empty for the moment. As suggested by Paul Bolle <pebolle@tiscali.nl>. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | MIPS: MT: Remove SMTC supportRalf Baechle2014-05-241-13/+0
|/ | | | | | | | | | | | | | | Nobody is maintaining SMTC anymore and there also seems to be no userbase. Which is a pity - the SMTC technology primarily developed by Kevin D. Kissell <kevink@paralogos.com> is an ingenious demonstration for the MT ASE's power and elegance. Based on Markos Chandras <Markos.Chandras@imgtec.com> patch https://patchwork.linux-mips.org/patch/6719/ which while very similar did no longer apply cleanly when I tried to merge it plus some additional post-SMTC cleanup - SMTC was a feature as tricky to remove as it was to merge once upon a time. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: SMP: kill redundant call of generic_smp_call_function_single_interrupt()Jiang Liu2013-10-291-1/+0
| | | | | | | | | | | | | | | | | | | | | | Since commit 9a46ad6d6df3b54 "smp: make smp_call_function_many() use logic similar to smp_call_function_single()", generic_smp_call_function_single_interrupt() is an alias of generic_smp_call_function_interrupt(), so kill the redundant call. Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Cc: Jiang Liu <liuj97@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Shaohua Li <shli@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Jiri Kosina <trivial@kernel.org> Cc: Wang YanQing <udknight@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: linux-arch@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/5820/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Delete __cpuinit/__CPUINIT usage from MIPS codePaul Gortmaker2013-07-141-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 3747069b25e419f6b51395f48127e9812abc3596 upstream. The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) and are flagged as __cpuinit -- so if we remove the __cpuinit from the arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit related content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. Here, we remove all the MIPS __cpuinit from C code and __CPUINIT from asm files. MIPS is interesting in this respect, because there are also uasm users hiding behind their own renamed versions of the __cpuinit macros. [1] https://lkml.org/lkml/2013/5/20/589 [ralf@linux-mips.org: Folded in Paul's followup fix.] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5494/ Patchwork: https://patchwork.linux-mips.org/patch/5495/ Patchwork: https://patchwork.linux-mips.org/patch/5509/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Idle: Consolidate all declarations in <asm/idle.h>.Ralf Baechle2013-05-221-0/+1
| | | | Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds2013-05-101-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MIPS updates from Ralf Baechle: - More work on DT support for various platforms - Various fixes that were to late to make it straight into 3.9 - Improved platform support, in particular the Netlogic XLR and BCM63xx, and the SEAD3 and Malta eval boards. - Support for several Ralink SOC families. - Complete support for the microMIPS ASE which basically reencodes the existing MIPS32/MIPS64 ISA to use non-constant size instructions. - Some fallout from LTO work which remove old cruft and will generally make the MIPS kernel easier to maintain and resistant to compiler optimization, even in absence of LTO. - KVM support. While MIPS has announced hardware virtualization extensions this KVM extension uses trap and emulate mode for virtualization of MIPS32. More KVM work to add support for VZ hardware virtualizaiton extensions and MIPS64 will probably already be merged for 3.11. Most of this has been sitting in -next for a long time. All defconfigs have been build or run time tested except three for which fixes are being sent by other maintainers. Semantic conflict with kvm updates done as per Ralf * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (118 commits) MIPS: Add new GIC clockevent driver. MIPS: Formatting clean-ups for clocksources. MIPS: Refactor GIC clocksource code. MIPS: Move 'gic_frequency' to common location. MIPS: Move 'gic_present' to common location. MIPS: MIPS16e: Add unaligned access support. MIPS: MIPS16e: Support handling of delay slots. MIPS: MIPS16e: Add instruction formats. MIPS: microMIPS: Optimise 'strnlen' core library function. MIPS: microMIPS: Optimise 'strlen' core library function. MIPS: microMIPS: Optimise 'strncpy' core library function. MIPS: microMIPS: Optimise 'memset' core library function. MIPS: microMIPS: Add configuration option for microMIPS kernel. MIPS: microMIPS: Disable LL/SC and fix linker bug. MIPS: microMIPS: Add vdso support. MIPS: microMIPS: Add unaligned access support. MIPS: microMIPS: Support handling of delay slots. MIPS: microMIPS: Add support for exception handling. MIPS: microMIPS: Floating point support. MIPS: microMIPS: Fix macro naming in micro-assembler. ...
| * MIPS: Export symbols used by KVM/MIPS moduleSanjay Lal2013-05-081-0/+1
| | | | | | | | | | | | | | Signed-off-by: Sanjay Lal <sanjayl@kymasys.com> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | mips: Use generic idle loopThomas Gleixner2013-04-081-1/+1
|/ | | | | | | | | | | | | Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Reviewed-by: Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Link: http://lkml.kernel.org/r/20130321215234.754954871@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* MIPS: drivers: remove __dev* attributes.Greg Kroah-Hartman2013-01-031-1/+1
| | | | | | | | | | | | | | CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* MIPS: kdump: Add supportRalf Baechle2012-12-131-0/+17
| | | | | | | | | | | | [ralf@linux-mips.org: Original patch by Maxim Uvarov <muvarov@gmail.com> with plenty of further shining, polishing, debugging and testing by me.] Signed-off-by: Maxim Uvarov <muvarov@gmail.com> Cc: linux-mips@linux-mips.org Cc: kexec@lists.infradead.org Cc: horms@verge.net.au Patchwork: https://patchwork.linux-mips.org/patch/1025/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: Synchronize MIPS count one CPU at a timeJayachandran C2012-08-171-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | The current implementation of synchronise_count_{master,slave} blocks slave CPUs in early boot until all of them come up. This no longer works because blocking a CPU with interrupts off after notifying the CPU to be online causes problems with the current kernel. Specifically, after the workqueue changes (commit a08489c569dc1 "Pull workqueue changes from Tejun Heo") the CPU_ONLINE notification callback workqueue_cpu_up_callback() will hang on wait_for_completion(&idle_rebind.done), if the slave CPUs are blocked for synchronize_count_slave(). The changes are to update synchronize_count_{master,slave}() to handle one CPU at a time and to call synchronise_count_master() in __cpu_up() so that the CPU_ONLINE notification goes out only after the COP0 COUNT register is synchronized. [ralf@linux-mips.org: This matter only to those few platforms which are using the cp0 counter as their clocksource which are XLP, XLR and MIPS' CMP solution.] Signed-off-by: Jayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4216/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: SMTC: Support for Multi-threaded FPUsSteven J. Hill2012-07-231-1/+3
| | | | | | | Signed-off-by: Steven J. Hill <sjhill@mips.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3603/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: smp: Warn on too early irq enableYong Zhang2012-07-191-0/+5
| | | | | | | | | | | Just to catch a potential issue. Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Cc: Sergei Shtylyov <sshtylyov@mvista.com> Cc: David Daney <david.daney@cavium.com> Acked-by: David Daney <david.daney@cavium.com> Patchwork: https://patchwork.linux-mips.org/patch/3852/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: call set_cpu_online() on cpu being brought up with irq disabledYong Zhang2012-07-191-2/+2
| | | | | | | | | | | | | | To prevent a problem as commit 5fbd036b [sched: Cleanup cpu_active madness] and commit 2baab4e9 [sched: Fix select_fallback_rq() vs cpu_active/cpu_online] try to resolve, move set_cpu_online() to the brought up CPU and with irq disabled. Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Cc: Sergei Shtylyov <sshtylyov@mvista.com> Cc: David Daney <david.daney@cavium.com> Acked-by: David Daney <david.daney@cavium.com> Patchwork: https://patchwork.linux-mips.org/patch/3851/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* MIPS: call ->smp_finish() a little lateYong Zhang2012-07-191-1/+2
| | | | | | | | | | | | | | We have move irq enable to ->smp_finish. Place ->smp_finish() a little late to prepare for move set_cpu_online() into start_secondary. And it's not necessary to call cpu_set(cpu, cpu_callin_map) and synchronise_count_slave() with irq enabled. Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Cc: Sergei Shtylyov <sshtylyov@mvista.com> Cc: David Daney <david.daney@cavium.com> Acked-by: David Daney <david.daney@cavium.com> Patchwork: https://patchwork.linux-mips.org/patch/3850/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds2012-05-291-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MIPS updates from Ralf Baechle: "The whole series has been sitting in -next for quite a while with no complaints. The last change to the series was before the weekend the removal of an SPI patch which Grant - even though previously acked by himself - appeared to raise objections. So I removed it until the situation is clarified. Other than that all the patches have the acks from their respective maintainers, all MIPS and x86 defconfigs are building fine and I'm not aware of any problems introduced by this series. Among the key features for this patch series is a sizable patchset for Lantiq which among other things introduces support for Lantiq's flagship product, the FALCON SOC. It also means that the opensource developers behind this patchset have overtaken Lantiq's competing inhouse development team that was working behind closed doors. Less noteworthy the ath79 patchset which adds support for a few more chip variants, cleanups and fixes. Finally the usual dose of tweaking of generic code." Fix up trivial conflicts in arch/mips/lantiq/xway/gpio_{ebu,stp}.c where printk spelling fixes clashed with file move and eventual removal of the printk. * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (81 commits) MIPS: lantiq: remove orphaned code MIPS: Remove all -Wall and almost all -Werror usage from arch/mips. MIPS: lantiq: implement support for FALCON soc MTD: MIPS: lantiq: verify that the NOR interface is available on falcon soc MTD: MIPS: lantiq: implement OF support watchdog: MIPS: lantiq: implement OF support and minor fixes SERIAL: MIPS: lantiq: implement OF support GPIO: MIPS: lantiq: convert gpio-stp-xway to OF GPIO: MIPS: lantiq: convert gpio-mm-lantiq to OF and of_mm_gpio GPIO: MIPS: lantiq: move gpio-stp and gpio-ebu to the subsystem folder MIPS: pci: convert lantiq driver to OF MIPS: lantiq: convert dma to platform driver MIPS: lantiq: implement support for clkdev api MIPS: lantiq: drop ltq_gpio_request() and gpio_to_irq() OF: MIPS: lantiq: implement irq_domain support OF: MIPS: lantiq: implement OF support MIPS: lantiq: drop mips_machine support OF: PCI: const usage needed by MIPS MIPS: Cavium: Remove smp_reserve_lock. MIPS: Move cache setup to setup_arch(). ...
| * MIPS: Move cache setup to setup_arch().David Daney2012-05-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 97ce2c88f9ad42e3c60a9beb9fca87abf3639faa (jump-label: initialize jump-label subsystem much earlier) breaks MIPS. The jump_label_init() call was moved before trap_init() which is where we initialize flush_icache_range(). In order to be good citizens, we move cache initialization earlier so that we don't jump through a null flush_icache_range function pointer when doing the jump label initialization. Signed-off-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3822/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | mips: Use generic idle thread allocationThomas Gleixner2012-04-261-53/+1
| | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Ralf Baechle <ralf@linux-mips.org> Link: http://lkml.kernel.org/r/20120420124557.512158271@linutronix.de
* | smp: Add task_struct argument to __cpu_up()Thomas Gleixner2012-04-261-1/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Preparatory patch to make the idle thread allocation for secondary cpus generic. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Howells <dhowells@redhat.com> Cc: James E.J. Bottomley <jejb@parisc-linux.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: David S. Miller <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Richard Weinberger <richard@nod.at> Cc: x86@kernel.org Link: http://lkml.kernel.org/r/20120420124556.964170564@linutronix.de
* remove references to cpu_*_map in arch/Rusty Russell2012-03-291-15/+12
| | | | | | | | | | | | | | | | | | | | This has been obsolescent for a while; time for the final push. In adjacent context, replaced old cpus_* with cpumask_*. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: David S. Miller <davem@davemloft.net> (arch/sparc) Acked-by: Chris Metcalf <cmetcalf@tilera.com> (arch/tile) Cc: user-mode-linux-devel@lists.sourceforge.net Cc: Russell King <linux@arm.linux.org.uk> Cc: linux-arm-kernel@lists.infradead.org Cc: Richard Kuo <rkuo@codeaurora.org> Cc: linux-hexagon@vger.kernel.org Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Helge Deller <deller@gmx.de> Cc: sparclinux@vger.kernel.org
* Disintegrate asm/system.h for MIPSDavid Howells2012-03-281-1/+1
| | | | | | | | Disintegrate asm/system.h for MIPS. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> cc: linux-mips@linux-mips.org
* atomic: use <linux/atomic.h>Arun Sharma2011-07-261-1/+1
| | | | | | | | | | | | | | This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: Arun Sharma <asharma@fb.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* MIPS: Move idle task creation to work queueMaksim Rayskiy2011-03-141-2/+29
| | | | | | | | | | | | | | | | | | | To avoid forking usermode thread when creating an idle task, move fork_idle to a work queue. If kernel starts with maxcpus= option which does not bring all available cpus online at boot time, idle tasks for offline cpus are not created. If later offline cpus are hotplugged through sysfs, __cpu_up is called in the context of the user task, and fork_idle copies its non-zero mm pointer. This causes BUG() in per_cpu_trap_init. This also avoids issues with resource limits of the CPU writing to sysfs, containers, maybe others. Signed-off-by: Maksim Rayskiy <mrayskiy@broadcom.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2070/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
OpenPOWER on IntegriCloud