summaryrefslogtreecommitdiffstats
path: root/arch/blackfin/mach-bf548/boards
Commit message (Collapse)AuthorAgeFilesLines
* Blackfin: boards: clean up redundant/dead spi resourcesMike Frysinger2011-07-232-47/+0
| | | | | | | | | | | | The default for the Blackfin SPI driver is 8 bits and dma disabled, so many of the bfin5xx_spi_chip resources are redundant. So punt those parts. Further, drivers should themselves be declaring 16 bit transfers, so for those that do, and for the ones which no longer do 16 bit transfers, drop the bfin5xx_spi_chip resources. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: boards: update ASoC resources after machine driver overhaulScott Jiang2011-05-251-6/+100
| | | | | | | | | Now that the Blackfin machine drivers have been updated to the multicomponent support, update the resources to match. The pin settings are now a board issue and removed from the driver. Signed-off-by: Scott Jiang <scott.jiang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: bf548-ezkit/bf561-ezkit: update nor flash layoutMike Frysinger2011-05-251-1/+9
| | | | | | | | Both the BF548-EZKIT and the BF561-EZKIT use top boot flashes, so now that Das U-Boot uses the last small sector for its environment, update their nor layout in the kernel accordingly. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: bf548-ezkit: add CAN1 supportAaron Wu2011-03-181-7/+48
| | | | | Signed-off-by: Aaron Wu <aaronwu06@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: boards: add missing "static" to peripheral listsMike Frysinger2011-01-102-18/+18
| | | | Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: sport_uart resources: remove unused secondary RX/TX pinsSonic Zhang2011-01-102-4/+4
| | | | | | | | The SPORT/UART driver doesn't use the secondary channel pins, so don't try and request them thus keeping other drivers from using them. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: musb-boards: push clkin value to platform resourcesBob Liu2011-01-102-0/+2
| | | | | | | | | In order to not touch the driver file for different xtal usage, push the clkin value to board file and calculate the register value instead of hardcoding it. Signed-off-by: Bob Liu <lliubbo@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* usb: musb: split blackfin to its own platform_driverFelipe Balbi2010-12-102-2/+2
| | | | | | | | | | | Just adding its own platform_driver, not really using it yet. Later patches will come to split power management code from musb_core and move it completely to HW glue layer. Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: musb: trivial search and replace patchFelipe Balbi2010-12-102-2/+2
| | | | | | | | | | change all ocurrences of musb_hdrc to musb-hdrc. We will call glue layer drivers musb-<glue layer>, so in order to keep things somewhat standard, let's change the underscore into a dash. Signed-off-by: Felipe Balbi <balbi@ti.com>
* usb: musb: add names for IRQs in structure resourceHema Kalliguddi2010-12-012-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Soon resource data will get automatically populated from a set of autogenerated data from TI's hardware database for the OMAP platform. Such database, might not have resources at the expected order by the current drivers. While we could hack in some exceptions to that tool to generate resources in a specific order, it seems less fragile to use the resource name instead. That way, no matter what order the resources are generated, the driver still work. Modified the OMAP, Blackfin and Davinci architecture files to add the name of the IRQs in the resource structures and musb driver to use the platform_get_irq_byname() api to get the device and dma irq numbers instead of using the index. Cc: Tony Lindgren <tony@atomide.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Hema HK <hemahk@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* Blackfin: bf548-ezkit: increase u-boot partition sizeMike Frysinger2010-10-221-3/+7
| | | | | | | | The BF54x processor has a ton of on-chip peripherals and in order to support them all, the u-boot image is quite large. So give it 512KiB in all bootable flashes to make our lives easier. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: boards: add example i2c resources for ad525x devicessteven miao2010-10-221-0/+5
| | | | | Signed-off-by: steven miao <realmz6@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: boards: fix num_chipselect values for on-chip SPI busesMike Frysinger2010-10-222-4/+4
| | | | | | | | | The num_chipselect field for on-chip Blackfin SPI buses is supposed to be 1 larger than the number of actual CSs available. This is because the hardware starts counting at 1 and not 0. There is a field for "CS0", but it is marked as "reserved" everywhere. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: cm-bf548: add support for Socket CANMichael Hennerich2010-10-221-0/+43
| | | | | | | Add platform resources for the on-chip CAN peripheral so we can use it. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: boards: update AD183x resourcesBarry Song2010-10-221-6/+6
| | | | | | | Make sure we use the right Kconfig names and platform strings. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: bf52x/bf54x boards: drop unused nand page sizeBarry Song2010-08-272-2/+0
| | | | | | | | | | Now that the driver for the Blackfin on-chip NFC no longer uses/respects the page_size from the platform resources (figures out the needs on the fly), drop it from the platform resources. This fixes some build errors since the defines no longer exists. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: mark MUSB VRSEL as active high for appropriate boardsCliff Cai2010-05-212-0/+8
| | | | | | | These boards all have the GPIO VRSEL hooked up as an active high. Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: rename AD1836 to AD183X in board filesBarry Song2010-03-091-4/+4
| | | | | | | | The ASoC codec driver was generalized and renamed, so update the board resources accordingly. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: bf548-ezkit: add ASoC CPU DAI resourcesBarry Song2010-03-091-0/+36
| | | | | Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: add UART/SPORT early platform resourcesSonic Zhang2010-03-092-0/+78
| | | | | | | | This lets people easily select the UART/SPORT consoles for early printk while leveraging the pins declared in the boards file. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: move SPORT UART resources to boards filesSonic Zhang2010-03-092-0/+308
| | | | | | | | | | Rather than keeping the pins in the actual driver and worrying about a mess of Kconfig options, declare all the desired pin resources in the boards file. This lets people easily select the specific pins/ports for the normal emulated UART as well as GPIOs for CTS/RTS. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: move on-chip UART resources to boards filesSonic Zhang2010-03-092-28/+384
| | | | | | | | | | Rather than keeping the pins in the actual driver and worrying about a mess of Kconfig options, declare all the desired pin resources in the boards file. This lets people easily select the specific pins/ports for the normal UART as well as GPIOs for CTS/RTS. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: bf537-stamp: add CAN resourcesBarry Song2009-12-151-0/+42
| | | | | Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: bf537-stamp: add ADXL346 orientation sensing supportMichael Hennerich2009-12-151-0/+5
| | | | | | | | The ADXL34x driver was updated to include orientation sensing, so have the bf537-stamp use it by default. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: bf537-stamp/bf548-ezkit: update ADXL34x resourcesMichael Hennerich2009-12-151-4/+2
| | | | | Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: fix typo in isp1760 platform nameMichael Hennerich2009-12-151-1/+1
| | | | | | | | The driver changed from "isp1760-hcd" to "isp1760", so update resources to match. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: update bfin_rotary definesMichael Hennerich2009-12-151-2/+2
| | | | | | | | The driver was moved during the merge process, so update the defines to match the new location. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: drop all simple-gpio board resourcesMike Frysinger2009-10-082-30/+0
| | | | | | | The simple-gpio has been replaced by the gpio sysfs interface, so drop the unused simple-gpio resources from all Blackfin boards. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: includecheck fix: mach-bf548, ezkit.cJaswinder Singh Rajput2009-10-081-1/+0
| | | | | | | | | Fix the following 'make includecheck' warning: arch/blackfin/mach-bf548/boards/ezkit.c: linux/input.h is included more than once. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: drop cs_change_per_word settingMike Frysinger2009-10-082-5/+0
| | | | | | | | Structs get initialized to 0 already, and we want to punt this field, so scrub it from all of our boards. Reported-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: mass clean up of copyright/licensing infoRobin Getz2009-10-072-52/+9
| | | | | | | | | | | | | | | | | | Bill Gatliff & David Brownell pointed out we were missing some copyrights, and licensing terms in some of the files in ./arch/blackfin, so this fixes things, and cleans them up. It also removes: - verbose GPL text(refer to the top level ./COPYING file) - file names (you are looking at the file) - bug url (it's in the ./MAINTAINERS file) - "or later" on GPL-2, when we did not have that right It also allows some Blackfin-specific assembly files to be under a BSD like license (for people to use them outside of Linux). Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: update cm board resourcesHarald Krapfenbauer2009-09-161-1/+14
| | | | | Signed-off-by: Harald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: fix BF54x SPI CS resourcesYi Li2009-09-162-4/+4
| | | | | | | The BF54x has three slave select signals for SPI0/SPI1, not eight. Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: delete '-spi' suffix in ad1836/ad1938 driver nameBarry Song2009-09-161-1/+1
| | | | | | | | The ASoC drivers have dropped the redundant "-spi" suffix in the driver name, so update the board resources accordingly. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: bf548-ezkit: fix incorrect LCD size parametersStefan Pledl2009-09-161-2/+2
| | | | | | | | | | | | | | | I think we have to use the physical dimensions [mm] of the display for .width and .heigth in struct bfin_bf54xfb_mach_info bf54x_lq043_data which are copied to fbinfo->var.height/.width in bf54x-lq043fb.c. linux/fb.h describes this values as 'height/weight of picture in mm' Otherwise QT calcs the wrong dpi value and the displayed fonts are very small. Signed-off-by: Stefan Pledl <stefan.pledl@mesutronic.de> Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: rename PCF8574 driver configMichael Hennerich2009-09-161-1/+1
| | | | | | | | The "TWI_KEYPAD" driver was renamed to "INPUT_PCF8574", so update the defines in the board resources accordingly. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: fix incomplete renaming of the bfin-twi-lcd driverMichael Hennerich2009-07-161-1/+1
| | | | | | | | | The sed used to rename the bfin-twi-lcd only replaced the first instance rather than all which led to the resources not being enabled when the driver was built as a module. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: drop unused ISP1760 port1_disable from board resourcesMike Frysinger2009-06-221-1/+0
| | | | | | | The port1 disable stuff was dropped from the USB ISP1760, so update the Blackfin boards accordingly. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: bf548-ezkit: update smsc911x resourcesMike Frysinger2009-06-131-0/+13
| | | | | | | The older smsc911x driver made platform data optional, but the newer one always requires it, so add proper settings to the BF548-EZKIT. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: define SPI IRQ in board resourcesYi Li2009-06-132-0/+20
| | | | | | | | The Blackfin SPI driver can be driven by an IRQ now, so declare it in the board resources. Signed-off-by: Yi Li <yi.li@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: bf548-ezkit/bf537-stamp: add resources for ADXL345/346Michael Hennerich2009-06-121-10/+73
| | | | | Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin: rename some Blackfin driversMike Frysinger2009-06-121-1/+1
| | | | | | | | Try to keep the naming conventions consistent, so: SPI_ADC_BF533 -> BFIN_SPI_ADC TWI_LCD -> BFIN_TWI_LCD Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Blackfin arch: drop CONFIG_I2C_BOARDINFO ifdefsMike Frysinger2009-02-041-4/+0
| | | | | | | | | Drop CONFIG_I2C_BOARDINFO ifdefs as the common i2c header handles this already by stubbing things out Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
* Blackfin arch: fix bug: kernel crash when enable SDIO host driverMike Frysinger2009-01-071-0/+10
| | | | | | | | | update bfin-sdh platform data to fix this issue. Pointed-out-by: Dominik Herwald <d.herwald@dsh-elektronik.de> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
* Blackfin arch: Set PB4 as the default irq for bf548 board v1.4+.Sonic Zhang2009-01-071-1/+1
| | | | | | Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
* Blackfin arch: add SDIO host driver platform dataCliff Cai2009-01-071-0/+11
| | | | | | Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
* Blackfin arch: Fix bug - wrong endpoint number and dma channels of USBBryan Wu2009-01-072-4/+4
| | | | | | | Blackfin MUSB has 8 endpoints including ep0 and 8 dma channels not 7 Signed-off-by: Bryan Wu <cooloney@kernel.org>
* Blackfin arch: Modify bfin_sir device configuration to board fileGraf Yang2009-01-072-16/+164
| | | | | | Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
* Blackfin arch: add simple-gpio resources to all adi/tinyboardsMike Frysinger2009-01-071-0/+15
| | | | | | Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
* Blackfin arch: make ADI board names consistentMike Frysinger2008-11-181-1/+1
| | | | | | | Cc: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
OpenPOWER on IntegriCloud