summaryrefslogtreecommitdiffstats
path: root/arch/arm
Commit message (Collapse)AuthorAgeFilesLines
* arm/dts: omap3-beagle: Add twl4030 and i2c EEPROMBenoit Cousson2012-03-071-0/+29
| | | | | | | | | | | | | | | | Add required clock frequencies for the i2c client devices existing on beagle board. Add the twl4030 basic description with only the twl_rtc module. Add the EEPROM node. Based on original patch from Manju: http://www.spinics.net/lists/linux-omap/msg55831.html Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Rob Herring <rob.herring@calxeda.com>
* arm/dts: omap4-sdp: Add twl6030, i2c3 and i2c4 devicesBenoit Cousson2012-03-071-0/+52
| | | | | | | | | | | | | | | | | | | | | Update DTS file with required clock frequencies for the i2c client devices existing on sdp4430. Add the twl6030 node inside the i2c1 controller node. This is the minimal support needed to boot OMAP4 boards without any crash. The support for all the features included in this MFD will be added later. Add the RTC submodule inside the twl node. Add tmp105 temperature sensor in i2c3 Add bh1780 Ambient Light Sensor in i2c3 Add hmc5843 3-Axis Digital Compass in i2c4 Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Rob Herring <rob.herring@calxeda.com>
* arm/dts: omap4-panda: Add twl6030 and i2c EEPROMBenoit Cousson2012-03-071-0/+34
| | | | | | | | | | | | | | | | | | Update pandaboard dts file with required clock frequencies for the i2c client devices existing on pandaboard. Add the twl6030 node in i2c1 controller. This is the minimal support needed to boot OMAP4 boards without any crash. The support for all the features included in this MFD will be added later. Add a generic i2c EEPROM entry. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Rob Herring <rob.herring@calxeda.com>
* arm/dts: twl4030: Add DTS file for twl4030 PM + Audio ICBenoit Cousson2012-03-071-0/+21
| | | | | | | | | | Add a dedicated DTS file for the twl4030/5030 Power + Audio IC. This chip is a big SoC that will be reused in a lot of various OMAP3 boards. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Rob Herring <rob.herring@calxeda.com>
* arm/dts: twl6030: Add DTS file for twl6030 PMICBenoit Cousson2012-03-071-0/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add a dedicated DTS file for the twl6030 Power IC. This chip is a big SoC that will be reused in a lot of various OMAP4+ boards. Note: This file is supposed to be included in a board DTS that will create the twl node in order to allow the &twl reference to work. Exmaple: ... &i2c1 { twl: twl@48 { reg = <0x48>; interrupts = <0 7 4>; interrupt-controller; interrupt-parent = <&gic>; }; }; /include/ "twl6030.dtsi" ... Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Rob Herring <rob.herring@calxeda.com>
* arm/dts: mt_ventoux: very basic support for TeeJet Mt.Ventoux boardIlya Yanok2012-03-051-0/+27
| | | | | | | | | | | Very basic support for TeeJet Mt.Ventoux board. Able to boot via board-generic and ramdisk/initramfs, however most of peripherals are not supported. Produces tons of twl4030 related errors as this board doesn't have twl4030 installed. Signed-off-by: Ilya Yanok <yanok@emcraft.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP2+: Remove extra ifdefs for board-genericTony Lindgren2012-03-051-44/+32
| | | | | | | | | | We need just one ifdef for each ARCH_OMAP2/3/4. Also remove the comment about i2c & twl driver as it's pretty obvious that we still need some platform data until drivers are converted to device tree. Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP2+: Fix build error when only ARCH_OMAP2/3 or 4 is selectedTony Lindgren2012-03-051-0/+7
| | | | | | | | | | Otherwise we'll get undefined reference to `gic_of_init' or undefined reference to `omap_intc_of_init'. This was caused by commit fbf75da733e82bb17a01e1b907b0e40d9c028823 (ARM: OMAP2+: board-generic: Use of_irq_init API). Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP2+: board-generic: Use of_irq_init APIBenoit Cousson2012-02-271-14/+16
| | | | | | | | | | | | Use the of_irq_init API introduced in 3.2 to handle interrupt-controller with DT. Update the irq_match table to map the proper XXX_of_init functions for INTC and GIC drivers. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Tony Lindgren <tony@atomide.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Grant Likely <grant.likely@secretlab.ca>
* arm/dts: OMAP3: Add interrupt-controller bindings for INTCBenoit Cousson2012-02-271-2/+4
| | | | | | | | | | | | Update the DTS with the proper information required by the INTC bindings. - Add the number of interrupt lines - Add the reg and the compatible entries. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Grant Likely <grant.likely@secretlab.ca>
* ARM: OMAP2/3: intc: Add DT support for TI interrupt controllerBenoit Cousson2012-02-272-10/+62
| | | | | | | | | | | | | | Add a function to initialize the OMAP2/3 interrupt controller (INTC) using a device tree node. This version take advantage of the new irq_domain_add_legacy API. Replace some printk() with the proper pr_ macro. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Tony Lindgren <tony@atomide.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Grant Likely <grant.likely@secretlab.ca>
* Merge branch 'irqdomain/next' of git://git.secretlab.ca/git/linux-2.6 into ↵Benoit Cousson2012-02-2712-82/+67
|\ | | | | | | for_3.4/dt_irq_domain2
| * irq_domain/c6x: constify irq_domain structuresGrant Likely2012-02-161-1/+1
| | | | | | | | | | | | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Mark Salter <msalter@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de>
| * irq_domain: Remove irq_domain_add_simple()Grant Likely2012-02-166-13/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | irq_domain_add_simple() was a stop-gap measure until complete irq_domain support was complete. This patch removes the irq_domain_add_simple() interface. This patch also drops the explicit irq_domain initialization performed by the mach-versatile code because the versatile interrupt controller already has irq_domain support built into it. This was a bug that was hanging around quietly for a while, but with the full irq_domain which actually verifies that irq_domain ranges are available it would cause the registration to fail and the system wouldn't boot. v4: Fixed number of irqs in mx5 gpio code v2: Updated to pass in host_data pointer on irq_domain allocation. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Cc: Russell King <linux@arm.linux.org.uk> Tested-by: Olof Johansson <olof@lixom.net>
| * irq_domain: Remove 'new' irq_domain in favour of the ppc oneGrant Likely2012-02-166-64/+52
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes the simplistic implementation of irq_domains and enables the powerpc infrastructure for all irq_domain users. The powerpc infrastructure includes support for complex mappings between Linux and hardware irq numbers, and can manage allocation of irq_descs. This patch also converts the few users of irq_domain_add()/irq_domain_del() to call irq_domain_add_legacy() instead. v3: Fix bug that set up too many irqs in translation range. v2: Fix removal of irq_alloc_descs() call in gic driver Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Tested-by: Olof Johansson <olof@lixom.net>
| * irq_domain: Make irq_domain structure match powerpc's irq_hostGrant Likely2012-02-141-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Part of the series to unify the irq remapping mechanisms in the kernel. A follow up patch will copy the powerpc implementation into kernel/irq/irqdomain.c, which will be a lot easier if the structures are identical. Where they differ, I've chose to use the powerpc names since there is a lot more code using those names. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Milton Miller <miltonm@bga.com> Tested-by: Olof Johansson <olof@lixom.net>
* | Merge branch 'for_3.4/dts_updates' of ↵Tony Lindgren2012-02-2478-440/+642
|\ \ | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt into dt
| * | arm/dts: Add support for TI OMAP3 EVM boardVaibhav Hiremath2012-02-241-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add OMAP3 EVM (OMAP3530, AM/DM37x) DTS file to use the omap3.dtsi SoC file, along with memory node information. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca>
| * | arm/dts: OMAP4: Update DTS file with new GIC bindingsBenoit Cousson2012-02-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | The GIC binding was updated in 3.2 and expects 3 interrupt-cells. - Update the #interrupt-cells Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Rob Herring <rob.herring@calxeda.com>
| * | arm/dts: OMAP3: Add i2c controller nodesBenoit Cousson2012-02-241-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | Add i2c controllers nodes into the main ocp bus. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Rob Herring <rob.herring@calxeda.com>
| * | arm/dts: OMAP4: Add i2c controller nodesBenoit Cousson2012-02-241-0/+28
| | | | | | | | | | | | | | | | | | | | | | | | Add i2c controllers nodes into the main ocp bus. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Grant Likely <grant.likely@secretlab.ca>
| * | Merge tag 'fixes-3.3-rc4' of ↵Linus Torvalds2012-02-1861-388/+492
| |\ \ | | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc These are the bug fixes that have accumulated since 3.3-rc3 in arm-soc. The majority of them are regression fixes for stuff that broke during the merge 3.3 window. The notable ones are: * The at91 ata drivers both broke because of an earlier cleanup patch that some other patches were based on. Jean-Christophe decided to remove the legacy at91_ide driver and fix the new-style at91-pata driver while keeping the cleanup patch. I almost rejected the patches for being too late and too big but in the end decided to accept them because they fix a regression. * A patch fixing build breakage from the sysdev-to-device conversion colliding with other changes touches a number of mach-s3c files. * b0654037 "ARM: orion: Fix Orion5x GPIO regression from MPP cleanup" is a mechanical change that unfortunately touches a lot of lines that should up in the diffstat. * tag 'fixes-3.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits) ARM: at91: drop ide driver in favor of the pata one pata/at91: use newly introduced SMC accessors ARM: at91: add accessor to manage SMC ARM: at91:rtc/rtc-at91sam9: ioremap register bank ARM: at91: USB AT91 gadget registration for module ep93xx: fix build of vision_ep93xx.c ARM: OMAP2xxx: PM: fix OMAP2xxx-specific UART idle bug in v3.3 ARM: orion: Fix USB phy for orion5x. ARM: orion: Fix Orion5x GPIO regression from MPP cleanup ARM: EXYNOS: Add cpu-offset property in gic device tree node ARM: EXYNOS: Bring exynos4-dt up to date ARM: OMAP3: cm-t35: fix section mismatch warning ARM: OMAP2: Fix the OMAP2 only build break seen with 2011+ ARM tool-chains ARM: tegra: paz00: fix wrong UART port on mini-pcie plug ARM: tegra: paz00: fix wrong SD1 power gpio i2c: tegra: Add devexit_p() for remove ARM: EXYNOS: Correct M-5MOLS sensor clock frequency on Universal C210 board ARM: EXYNOS: Correct framebuffer window size on Nuri board ARM: SAMSUNG: Fix missing api-change from subsys_interface change ARM: EXYNOS: Fix "warning: initialization from incompatible pointer type" ...
| | * Merge branch 'at91-fixes' of git://github.com/at91linux/linux-at91 into fixesArnd Bergmann2012-02-137-40/+109
| | |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'at91-fixes' of git://github.com/at91linux/linux-at91: ARM: at91: drop ide driver in favor of the pata one pata/at91: use newly introduced SMC accessors ARM: at91: add accessor to manage SMC ARM: at91:rtc/rtc-at91sam9: ioremap register bank ARM: at91: USB AT91 gadget registration for module
| | | * ARM: at91: drop ide driver in favor of the pata oneJean-Christophe PLAGNIOL-VILLARD2012-02-132-8/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Driver at91_ide is broken and should not be fixed: remove it. Modification of device files that where making use of it. The PATA driver (pata_at91) is able to replace at91_ide. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
| | | * ARM: at91: add accessor to manage SMCJean-Christophe PLAGNIOL-VILLARD2012-02-133-28/+100
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SMC, Static Memory Controller will need more accessors to fine configure its parameters. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
| | | * ARM: at91: USB AT91 gadget registration for moduleNicolas Ferre2012-02-134-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Registration of at91_udc as a module will enable SoC related code. Fix following an idea from Karel Znamenacek. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Karel Znamenacek <karel@ryston.cz> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: stable <stable@vger.kernel.org>
| | * | Merge branch 'fixes' of ↵Arnd Bergmann2012-02-135-11/+9
| | |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2xxx: PM: fix OMAP2xxx-specific UART idle bug in v3.3 ARM: OMAP3: cm-t35: fix section mismatch warning ARM: OMAP2: Fix the OMAP2 only build break seen with 2011+ ARM tool-chains ARM: OMAP2+: board-generic: Add missing handle_irq callbacks
| | | * | ARM: OMAP2xxx: PM: fix OMAP2xxx-specific UART idle bug in v3.3Paul Walmsley2012-02-091-7/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On OMAP2420-based systems, the PM code ignores the state of the UART functional clocks when determining what idle state to enter. This breaks the serial port now that the UART driver's clock behavior can be controlled via the PM autosuspend timeout. To fix, remove the special-case idle handling for the UARTs in the OMAP2420/2430 PM idle code added by commit 4af4016c53f52b26461b8030211f8427a58fa5ed ("OMAP3: PM: UART: disable clocks when idle and off-mode support"). Tested on Nokia N800. This patch is a collaboration between Tony Lindgren <tony@atomide.com> and Paul Walmsley <paul@pwsan.com>. Signed-off-by: Paul Walmsley <paul@pwsan.com> Acked-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | | * | ARM: OMAP3: cm-t35: fix section mismatch warningIgor Grinberg2012-02-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | WARNING: arch/arm/mach-omap2/built-in.o(.text+0xeae8): Section mismatch in reference from the function cm_t35_init_usbh() to the (unknown reference) .init.data:(unknown) The function cm_t35_init_usbh() references the (unknown reference) __initdata (unknown). This is often because cm_t35_init_usbh lacks a __initdata annotation or the annotation of (unknown) is wrong. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | | * | ARM: OMAP2: Fix the OMAP2 only build break seen with 2011+ ARM tool-chainsSantosh Shilimkar2012-02-072-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With the latest Sourcery G++ Lite 2011.03-41 and latest linaro tool-chains OMAP2 only build breaks with below error. arch/arm/mach-omap2/omap-smc.S: Assembler messages: arch/arm/mach-omap2/omap-smc.S:30: Error: selected processor does not support ARM mode `smc #0' arch/arm/mach-omap2/omap-smc.S:53: Error: selected processor does not support ARM mode `smc #0' arch/arm/mach-omap2/omap-smc.S:61: Error: selected processor does not support ARM mode `smc #0' arch/arm/mach-omap2/omap-smc.S:69: Error: selected processor does not support ARM mode `smc #0' arch/arm/mach-omap2/omap-smc.S:77: Error: selected processor does not support ARM mode `smc #0' make[1]: *** [arch/arm/mach-omap2/omap-smc.o] Error 1 OMAP2 devices doesn't have the security support but the security support was getting built because of OMAP2PLUS. Don't build security code for OMAP2 devices. While at it, fix the secure-common line in the Makefile to use tabs instead of spaces. Reported-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| | | * | Merge branch 'fixes-dt' into fixesTony Lindgren2012-02-071-0/+4
| | | |\ \
| | * | | | ep93xx: fix build of vision_ep93xx.cH Hartley Sweeten2012-02-131-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix build breakage due to the following commits: Commit bd5f12a24766c1f299def0a78b008d4746f528f2 ARM: 7042/3: mach-ep93xx: break out GPIO driver specifics Commit 257af9f9725aa8a863b306659208a031135d59e7 ARM: 7041/1: gpio-ep93xx: hookup the to_irq callback in the driver The vision_ep9307 machine uses the ep93xx build-in gpios and needs to include <mach/gpio-ep93xx.h> to pickup the defines. The gpio_to_irq() call is now a callback to the gpio-ep93xx.c driver and cannot be used as a constant initializer for the .irq member of struct i2c_board_info. Signed-off-by: Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <rmallon@gmail.com> Acked-by: Mika Westerberg <mika.westerberg@iki.fi> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| | * | | | Merge branch 'v3.3-samsung-fixes-3' of ↵Arnd Bergmann2012-02-1312-24/+83
| | |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes * 'v3.3-samsung-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (2 commits) ARM: EXYNOS: Add cpu-offset property in gic device tree node ARM: EXYNOS: Bring exynos4-dt up to date Linux 3.3-rc3 This includes an update to the v3.3-rc3 release from v3.3-rc2 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| | | * | | | ARM: EXYNOS: Add cpu-offset property in gic device tree nodeThomas Abraham2012-02-091-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit db0d4db22a78 ('ARM: gic: allow GIC to support non-banked setups) requires a cpu-offset property to be specified for non-banked gic controllers, which is the case for Exynos4. Reported-and-Tested-by: Karol Lewandowski <k.lewandowsk@samsung.com> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| | | * | | | ARM: EXYNOS: Bring exynos4-dt up to dateKarol Lewandowski2012-02-091-2/+6
| | | | |_|/ | | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit brings exynos4-dt in line with recent changes to mach-exynos tree, specifically: - Fixes build break related to replacing plat/exynos4.h with common.h in commit cc511b8d84d8 ("ARM: 7257/1: EXYNOS: introduce arch/arm/mach-exynos/common.[ch]") - Converts machine to use CONFIG_MULTI_IRQ_HANDLER as done for other machines in commit 4e44d2cb95bd ("ARM: exynos4: convert to CONFIG_MULTI_IRQ_HANDLER") - Adds restart specifier as done for other machines in commit 9eb4859564d6 ("ARM: 7262/1: restart: EXYNOS: use new restart hook") Signed-off-by: Karol Lewandowski <k.lewandowsk@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| | * | | | Merge branch 'fixes' of ↵Arnd Bergmann2012-02-134-13/+13
| | |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/olof/tegra into fixes * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/olof/tegra: ARM: tegra: paz00: fix wrong UART port on mini-pcie plug ARM: tegra: paz00: fix wrong SD1 power gpio i2c: tegra: Add devexit_p() for remove ARM: tegra: dma: fix buildbreak for !CONFIG_TEGRA_SYSTEM_DMA
| | | * | | | ARM: tegra: paz00: fix wrong UART port on mini-pcie plugMarc Dietrich2012-02-062-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | UARTC is connected to the mini-pcie port. Signed-off-by: Marc Dietrich <marvin24@gmx.de> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
| | | * | | | ARM: tegra: paz00: fix wrong SD1 power gpioMarc Dietrich2012-02-062-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The power gpio for the external memory card was specified wrongly. Replace it with the correct value (tested with warmboot with fastboot). Signed-off-by: Marc Dietrich <marvin24@gmx.de> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
| | | * | | | ARM: tegra: dma: fix buildbreak for !CONFIG_TEGRA_SYSTEM_DMAOlof Johansson2012-01-241-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There's no need to keep the DMA_REQ_SEL defines inside the ifdef. Fixes the following build break with CONFIG_TEGRA_SYSTEM_DMA=n: arch/arm/mach-tegra/devices.c:645: error: 'TEGRA_DMA_REQ_SEL_I2S_1' undeclared here (not in a function) arch/arm/mach-tegra/devices.c:663: error: 'TEGRA_DMA_REQ_SEL_I2S2_1' undeclared here (not in a function) arch/arm/mach-tegra/devices.c:663: error: initializer element is not constant arch/arm/mach-tegra/devices.c:663: error: (near initialization for 'i2s_resource2[1].start') arch/arm/mach-tegra/devices.c:664: error: initializer element is not constant arch/arm/mach-tegra/devices.c:664: error: (near initialization for 'i2s_resource2[1].end') Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Stephen Warren <swarren@nvidia.com>
| | * | | | | ARM: orion: Fix USB phy for orion5x.Andrew Lunn2012-02-096-10/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch "ARM: orion: Consolidate USB platform setup code.", commit 4fcd3f374a928081d391cd9a570afe3b2c692fdc broke USB on TS-7800 and other orion5x boards, because the wrong type of PHY was being passed to the EHCI driver in the platform data. Orion5x needs EHCI_PHY_ORION and all the others want EHCI_PHY_NA. Allow the mach- code to tell the generic plat-orion code which USB PHY enum to place into the platform data. Version 2: Rebase to v3.3-rc2. Reported-by: Ambroz Bizjak <ambrop7@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Ambroz Bizjak <ambrop7@gmail.com> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | | | | ARM: orion: Fix Orion5x GPIO regression from MPP cleanupAndrew Lunn2012-02-093-275/+274
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patchset "ARM: orion: Refactor the MPP code common in the orion platform" broke at least Orion5x based platforms. These platforms have pins configured as GPIO when the selector is not 0x0. However the common code assumes the selector is always 0x0 for a GPIO lines. It then ignores the GPIO bits in the MPP definitions, resulting in that Orion5x machines cannot correctly configure there GPIO lines. The Fix removes the assumption that the selector is always 0x0. In order that none GPIO configurations are correctly blocked, Kirkwood and mv78xx0 MPP definitions are corrected to only set the GPIO bits for GPIO configurations. This third version, which does not contain any whitespace changes, and is rebased on v3.3-rc2. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | | | | Merge branch 'v3.3-samsung-fixes-2' of ↵Olof Johansson2012-02-0633-36/+62
| | |\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes * 'v3.3-samsung-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: Correct M-5MOLS sensor clock frequency on Universal C210 board ARM: EXYNOS: Correct framebuffer window size on Nuri board ARM: SAMSUNG: Fix missing api-change from subsys_interface change ARM: EXYNOS: Fix "warning: initialization from incompatible pointer type" ARM: S5PV210: Fix the name of exynos4_clk_hdmiphy_ctrl() for S5PV210 ARM: EXYNOS: Remove build warning without enabling PM ARM: SAMSUNG: Fix platform data setup for I2C adapter 0 ARM: EXYNOS: fix non-SMP builds for EXYNOS4 ARM: S3C6410: Use device names for both I2C clocks ARM: S3C64XX: Make s3c64xx_init_uarts() static
| | | * | | | | ARM: EXYNOS: Correct M-5MOLS sensor clock frequency on Universal C210 boardSylwester Nawrocki2012-01-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to keep the sensor's master clock frequency in valid range when FIMC parent clock is xusbxti, the specified frequency must be exactly 24MHZ, otherwise it's being set to too low value due to rounding. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| | | * | | | | ARM: EXYNOS: Correct framebuffer window size on Nuri boardSylwester Nawrocki2012-01-311-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The real LCD resolution on Nuri is 1024x600, not 1280x800. This change fixes the color distortion (green shadows) on half of the screen. Also increase framebuffer virtual size for display panning support. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| | | * | | | | ARM: SAMSUNG: Fix missing api-change from subsys_interface changeHeiko Stuebner2012-01-2723-26/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 4a858cfc9a (arm: convert sysdev_class to a regular subsystem) converted the samsung sysdevs into subsys_interface instances. While the original add-function only had a (struct sys_device *) parameter, the dev_add from subsys_interface needs (struct device *, struct subsys_interface *) leading to "initialized from incompatible pointer type" warnings. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Cc: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| | | * | | | | ARM: EXYNOS: Fix "warning: initialization from incompatible pointer type"Jonghwan Choi2012-01-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the wrong function prototype. Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| | | * | | | | ARM: S5PV210: Fix the name of exynos4_clk_hdmiphy_ctrl() for S5PV210Kukjin Kim2012-01-271-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Should be s5pv210_clk_hdmiphy_ctrl() in mach-s5pv210/. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| | | * | | | | ARM: EXYNOS: Remove build warning without enabling PMKukjin Kim2012-01-273-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixed following build warning with exynos4_defconfig. arch/arm/mach-exynos/clock.c:33: warning: 'exynos4_clock_save' defined but not used arch/arm/mach-exynos/clock-exynos4210.c:35: warning: 'exynos4210_clock_save' defined but not used arch/arm/mach-exynos/clock-exynos4212.c:35: warning: 'exynos4212_clock_save' defined but not used Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| | | * | | | | ARM: SAMSUNG: Fix platform data setup for I2C adapter 0Sylwester Nawrocki2012-01-271-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The common static default_i2c_data structure gets bus_num set by each s3c_i2c?_set_platdata() call, except for s3c_i2c0_set_platdata(). Thus if for instance s3c_i2c1_set_platdata() is called prior to s3c_i2c0_set_platdata() the I2C0 controller has bus_num set to wrong value of 1, i.e. the one from previous set_platdata call. Fix this by also setting bus_num for I2C0. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
| | | * | | | | ARM: EXYNOS: fix non-SMP builds for EXYNOS4Marek Szyprowski2012-01-271-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes the following build issue, which happens only if SMP has been disabled: arch/arm/mach-exynos/built-in.o: In function `exynos4_pm_resume': arch/arm/mach-exynos/pm.c:387: undefined reference to `scu_enable' Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
OpenPOWER on IntegriCloud