summaryrefslogtreecommitdiffstats
path: root/arch/arm
Commit message (Collapse)AuthorAgeFilesLines
* ARM: S5P6442: Fix PLL setting announce message.Thomas Abraham2010-07-051-1/+1
| | | | | | | | The S5P6442 PLL setting announce message incorrectly displays S5P6440 as the SoC. Change it to S5P6442. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
* ARM: SAMSUNG: Fix build without SDHCI controllers for S3C64XXMarek Szyprowski2010-07-051-0/+2
| | | | | | | | | | | | | | | This patch fixes the following compilation problem if only NCP machine is selected: arch/arm/mach-s3c64xx/s3c6410.c: In function 's3c6410_map_io': arch/arm/mach-s3c64xx/s3c6410.c:51: error: implicit declaration of function 's3c6410_default_sdhci2' And also adds missed 's3c6400_default_sdhci2'. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> [kgene.kim@samsung.com: minor title fix and added comments] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
* ARM: S5PV210: Correct clock register propertiesMyungJoo Ham2010-07-051-53/+62
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. Corrected shift values of I2S and UART clocks (CLK_GATE_IP3), which were defined incorrectly. 2. Corrected shift values of sclk_audio, uclk1, sclk_fimd, sclk_mmc, sclk_spi, sclk_pwm, which had duplicated .enable/.ctrlbit with their twins defined in struct clk init_clocks_disable[] and struct clk init_clocks[]. We've changed their .enable/.ctrlbit to use CLK_SRC_MASK register to avoid the duplicated clock problem described below. NOTE: Duplicated Clock Problem Please note that each clock definition should access different control register; otherwise, the system may suffer lockups. For example, if we have two clock definitions "a" and "b" which access the same register (and the shift value). Then, when we do: module A clk = clk_get("a"); clk->clk_enable(clk); module B (context switch) clk = clk_get("b"); clk->clk_enable(clk); do something with clk. clk->clk_disable(clk); module A (context switch) do something with clk * At this point, the system may hang. Therefore, there should be no clock definitions with the same contol register/shift. If we need to create "aliases", then, creating child clocks sharing the clock should be fine. 3. Corrected other sclk_* shift values and access registers. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> [kgene.kim@samsung.com: minor title and message fix] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
* ARM: S5P: Bug fix on external interrupt for S5P SoCsBoojin Kim2010-07-051-1/+1
| | | | | | | | | This patch fixes bug on eint type set function, s5p_irq_eint_set_type(). In the IRQ_TYPE_EDGE_FALLING case, S5P_EXTINT_FALLEDGE is right instead of S5P_EXTINT_RISEEDGE Signed-off-by: Boojin Kim <boojin.kim@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
* ARM: 6205/1: perf: ensure counter delta is treated as unsignedWill Deacon2010-07-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware performance counters on ARM are 32-bits wide but atomic64_t variables are used to represent counter data in the hw_perf_event structure. The armpmu_event_update function right-shifts a signed 64-bit delta variable and adds the result to the event count. This can lead to shifting in sign-bits if the MSB of the 32-bit counter value is set. This results in perf output such as: Performance counter stats for 'sleep 20': 18446744073460670464 cycles <-- 0xFFFFFFFFF12A6000 7783773 instructions # 0.000 IPC 465 context-switches 161 page-faults 1172393 branches 20.154242147 seconds time elapsed This patch ensures that the delta value is treated as unsigned so that the right shift sets the upper bits to zero. Cc: <stable@kernel.org> Acked-by: Jamie Iles <jamie.iles@picochip.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: 6202/1: Do not ARM_DMA_MEM_BUFFERABLE on RealView boards with L210/L220Catalin Marinas2010-07-021-0/+2
| | | | | | | | | | | RealView boards with certain revisions of the L210/L220 cache controller may have issues (hardware deadlock) with the mandatory barriers (DSB followed by an L2 cache sync) when ARM_DMA_MEM_BUFFERABLE is enabled. The patch disables ARM_DMA_MEM_BUFFERABLE for these boards. Tested-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* ARM: 6201/1: RealView: Do not use outer_sync() on ARM11MPCore boards with L220Catalin Marinas2010-07-022-0/+10
| | | | | | | | | | | | | RealView boards with certain revisions of the L220 cache controller (ARM11* processors only) may have issues (hardware deadlock) with the recent changes to the mb() barrier implementation (DSB followed by an L2 cache sync). The patch redefines the RealView ARM11MPCore mandatory barriers without the outer_sync() call. Cc: <stable@kernel.org> Tested-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Merge branch 'imx-for-2.6.35' of git://git.pengutronix.de/git/imx/linux-2.6Russell King2010-07-011-11/+22
|\
| * ARM: mx3: mx31lilly: fix build error for !CONFIG_USB_ULPIDaniel Mack2010-07-011-11/+22
| | | | | | | | | | | | | | | | | | | | | | arch/arm/mach-mx3/built-in.o: In function `mx31lilly_board_init': mach-kzm_arm11_01.c:(.init.text+0x674): undefined reference to `otg_ulpi_create' mach-kzm_arm11_01.c:(.init.text+0x68c): undefined reference to `otg_ulpi_create' mach-kzm_arm11_01.c:(.init.text+0x744): undefined reference to `mxc_ulpi_access_ops' make: *** [.tmp_vmlinux1] Error 1 Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* | Merge branch 'fix' of ↵Russell King2010-07-014-20/+15
|\ \ | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
| * | [ARM] mmp: fix build failure due to IRQ_PMU depends on ARCH_PXAJonathan Cameron2010-06-141-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | PMU is not tested and enabled on MMP architecture at this moment, the device IRQ number, IRQ_PMU depends on ARCH_PXA. Build PMU only for ARCH_PXA. Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
| * | [ARM] pxa/mioa701: fix camera regressionRobert Jarzmik2010-06-131-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit a48c24a696f0d93c49f913b7818e9819612b1f4e, the camera is not working anymore. After the v4l2 migration, the mt9m111 camera board information was not passed to the i2c layer anymore, but stored for future use of v4l2 (through soc_camera). Because mioa701_i2c_devices[] was tagged as "__initdata", and because after the v4l2 migration, the new structure "iclink" references it, the mt9m111 driver is not probed anymore, as part of "iclink" is not valid (discarded after kernel init). Although there is not compilation error, nor runtime oops, this patch restores a working camera on the mioa701 board. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
| * | [ARM] pxa/z2: fix flash layout to final versionMarek Vasut2010-06-131-16/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes flash layout to it's final version. Also, I fixed the authorship information of this file as it's been totally reworked since Ken released his last version. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
| * | [ARM] pxa: fix incorrect gpio type in udc_pxa2xx.hSteve Bennett2010-06-131-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | gpio must be int, not u16, otherwise -1 isn't recognised by gpio_is_valid(). Signed-off-by: Steve Bennett <steveb@workware.net.au> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
* | | ARM: 6195/1: OMAP3: pmu: make CPU_HAS_PMU dependent on OMAP3_EMUWill Deacon2010-07-011-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CPU performance event counters on v7 cores will only operate if either the NIDEN or DBGEN signals are driven high. For the OMAP3 platform, these signals are driven low by default but DBGEN can be asserted by selecting the OMAP3_EMU Kconfig option, which enables the virtual clock for hardware debugging peripherals. Acked-by: Jean Pihet <jpihet@mvista.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | ARM: 6194/1: change definition of cpu_relax() for ARM11MPCoreWill Deacon2010-07-011-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Linux expects that if a CPU modifies a memory location, then that modification will eventually become visible to other CPUs in the system. On an ARM11MPCore processor, loads are prioritised over stores so it is possible for a store operation to be postponed if a polling loop immediately follows it. If the variable being polled indirectly depends on the outstanding store [for example, another CPU may be polling the variable that is pending modification] then there is the potential for deadlock if interrupts are disabled. This deadlock occurs in the KGDB testsuire when executing on an SMP ARM11MPCore configuration. This patch changes the definition of cpu_relax() to smp_mb() for ARMv6 cores, forcing a flushing of the write buffer on SMP systems before the next load takes place. If the Kernel is not compiled for SMP support, this will expand to a barrier() as before. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | ARM: 6193/1: RealView: Align the machine_desc.phys_io to 1MB sectionCatalin Marinas2010-07-015-5/+10
| | | | | | | | | | | | | | | | | | | | | | | | When not aligned, random bits could be written in the initial page table by the __create_page_tables() function. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | ARM: 6192/1: VExpress: Align the machine_desc.phys_io to 1MB sectionCatalin Marinas2010-07-011-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | When not aligned, random bits could be written in the initial page table by the __create_page_tables() function. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | ARM: 6188/1: Add a config option for the ARM11MPCore DMA cache maintenance ↵Catalin Marinas2010-07-012-3/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | workaround Commit f4d6477f introduced a workaround for the lack of hardware broadcasting of the cache maintenance operations on ARM11MPCore. However, the workaround is only valid on CPUs that do not do speculative loads into the D-cache. This patch adds a Kconfig option with the corresponding help to make the above clear. When the DMA_CACHE_RWFO option is disabled, the kernel behaviour is that prior to the f4d6477f commit. This also allows ARMv6 UP processors with speculative loads to work correctly. For other processors, a different workaround may be needed. Cc: Ronen Shitrit <rshitrit@marvell.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | ARM: 6187/1: The v6_dma_inv_range() function must preserve data on SMPCatalin Marinas2010-07-011-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A recent patch for DMA cache maintenance on ARM11MPCore added a write for ownership trick to the v6_dma_inv_range() function. Such operation destroys data already present in the buffer. However, this function is used with with dma_sync_single_for_device() which is supposed to preserve the existing data transfered into the buffer. This patch adds a combination of read/write for ownership to preserve the original data. Reported-by: Ronen Shitrit <rshitrit@marvell.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | ARM: 6186/1: Avoid the CONSISTENT_DMA_SIZE warning on noMMU buildsCatalin Marinas2010-07-011-9/+9
| |/ |/| | | | | | | | | | | | | This macro is not defined when !CONFIG_MMU so this patch moves the CONSISTENT_* definitions to the CONFIG_MMU section. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds2010-06-308-12/+20
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: OMAP: hwmod: Fix the missing braces OMAP4: clock: Fix multi-omap boot with reset un-used clocks OMAP3: PM: fix IO daisy chain enable to use PM_WKEN reg omap: GPIO: fix auto-disable of debounce clock omap: DMTIMER: Ack pending interrupt always when stopping a timer omap: Stalker board: switch over to gpio_set_debounce omap: fix build failure due to missing include dma-mapping.h omap iommu: Fix Memory leak
| * \ Merge branch 'for_2.6.35rc' of git://git.pwsan.com/linux-2.6 into ↵Tony Lindgren2010-06-2821-33/+213
| |\ \ | | | | | | | | | | | | omap-fixes-for-linus
| | * | OMAP: hwmod: Fix the missing bracesBenoit Cousson2010-06-231-3/+6
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As reported by Sergei, a couple of braces were missing after the WARN removal patch. [07/22] OMAP: hwmod: Replace WARN by pr_warning if clock lookup failed https://patchwork.kernel.org/patch/100756/ Signed-off-by: Benoit Cousson <b-cousson@ti.com> [paul@pwsan.com: fixed patch description per Anand's E-mail] Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Sergei Shtylyov <sshtylyov@mvista.com> Cc: Anand Gadiyar <gadiyar@ti.com>
| * | OMAP4: clock: Fix multi-omap boot with reset un-used clocksSantosh Shilimkar2010-06-161-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch uses "ENABLE_ON_INIT" flag on the emif clock nodes to avoid the emif clk getting cut as part of reset un-used clock routine which prevents boot. Since "omap4xxx_clk_init()" calls "clk_enable_init_clocks()" which increases the usecount on all ENABLE_ON_INIT clocks, it prevents "omap2_clk_disable_unused()" from disabling the clock. The real fix is to have driver for EMIF and do clock get/enable as part of it. The EMIF driver is planned to be done HWMOD way so till that available to keep omap3_defconfig booting on OMAP4430, this patch is necessary. (Will updated the auto-gen script for 44xx accordingly) The fix was suggested by Paul Walmsley Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Nishanth Menon <nm@ti.com> Acked-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | OMAP3: PM: fix IO daisy chain enable to use PM_WKEN regKevin Hilman2010-06-101-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Checking to se if the IO daisy chain is enabled should be checking the PM_WKEN register, not the PM_WKST register. Reading PM_WKST tells us if an event occurred, not whether or not it is enabled. Apparently, we've been lucky until now in that a pending event has not been there during enable. However, on 3630/Zoom3, I noticed because of the WARN that this timeout was always happening. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | omap: GPIO: fix auto-disable of debounce clockKevin Hilman2010-06-101-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The addition of the new debounce code (commit 168ef3d9a56bd8bffe0ef4189c450888b4aefefe) broke the auto-disable of debounce clocks on idle by forgetting to update the debounce clock enable mask. Add back the updating of bank->dbck_enable_mask so debounce clocks are auto-disabled. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | omap: DMTIMER: Ack pending interrupt always when stopping a timerTero Kristo2010-06-101-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The kernel timer queue is being run currently from a GP timer running in a one shot mode, which works in a way that when it expires, it will also stop. Usually during this situation, the interrupt handler will ack the interrupt, load a new value to the timer and start it again. During suspend, the situation is slightly different, as we disable interrupts just before timekeeping is suspended, which leaves a small window where the timer can expire before it is stopped, and will leave the interrupt flag pending. This pending interrupt will prevent ARM sleep entry, thus now we ack it always when we are attempting to stop a timer. Signed-off-by: Tero Kristo <tero.kristo@nokia.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> [tony@atomide.com: removed the ifdef to make the patch cover omap1 also] Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | omap: Stalker board: switch over to gpio_set_debounceSantosh Shilimkar2010-06-091-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 48feb337475a arm: omap: switch over to gpio_set_debounce caused "undefined reference to omap_set_gpio_debounce" build error. The fix is to use the generic gpiolib function. Cc: Felipe Balbi <felipe.balbi@nokia.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | omap: fix build failure due to missing include dma-mapping.hAmit Kucheria2010-06-091-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes following error, CC arch/arm/mach-omap2/usb-ehci.o arch/arm/mach-omap2/usb-ehci.c:263: error: implicit declaration of function 'DMA_BIT_MASK' arch/arm/mach-omap2/usb-ehci.c:263: error: initializer element is not constant make[1]: *** [arch/arm/mach-omap2/usb-ehci.o] Error 1 Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | omap iommu: Fix Memory leakSatish2010-06-091-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The memory allocated for sgt structure is not freed on error when sg_alloc_table is called in sgtable_alloc(). Signed-off-by: Satish Kumar <x0124230@ti.com> Signed-off-by: Manjunatha GK <manjugk@ti.com> Cc: Vimal Singh <vimal.newwork@gmail.com> Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com> Signed-off-by: Tony Lindgen <tony@atomide.com>
* | | arm: update gfp/slab.h includesTejun Heo2010-06-281-0/+1
| |/ |/| | | | | | | | | | | | | | | | | Implicit slab.h inclusion via percpu.h is about to go away. Make sure gfp.h or slab.h is included as necessary. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
* | Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2010-06-1019-30/+206
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 6164/1: Add kto and kfrom to input operands list. ARM: 6166/1: Proper prefetch abort handling on pre-ARMv6 ARM: 6165/1: trap overflows on highmem pages from kmap_atomic when debugging ARM: 6152/1: ux500 make it possible to disable localtimers [ARM] pxa/spitz: Correctly register WM8750 [ARM] pxa/palmtc: storage class should be before const qualifier ARM: 6146/1: sa1111: Prevent deadlock in resume path ARM: 6145/1: ux500 MTU clockrate correction ARM: 6144/1: TCM memory bug freeing bug ARM: VFP: Fix vfp_put_double() for d16-d31
| * | ARM: 6164/1: Add kto and kfrom to input operands list.Khem Raj2010-06-084-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When functions incoming parameters are not in input operands list gcc 4.5 does not load the parameters into registers before calling this function but the inline assembly assumes valid addresses inside this function. This breaks the code because r0 and r1 are invalid when execution enters v4wb_copy_user_page () Also the constant needs to be used as third input operand so account for that as well. Tested on qemu arm. CC: <stable@kernel.org> Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | Merge branch 'fix' of ↵Russell King2010-06-0842-293/+1326
| |\ \ | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
| | * | [ARM] pxa/spitz: Correctly register WM8750Marek Vasut2010-05-311-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch registers the WM8750 codec on a proper place on the SPITZ machine after the WM8750 driver was converted to new API. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
| | * | [ARM] pxa/palmtc: storage class should be before const qualifierTobias Klauser2010-05-311-2/+2
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
| * | ARM: 6166/1: Proper prefetch abort handling on pre-ARMv6Anfei2010-06-081-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instruction faults on pre-ARMv6 CPUs are interpreted as a 'translation fault', but do_translation_fault doesn't handle well if user mode trying to run instruction above TASK_SIZE, and result in the infinite retry of that instruction. CC: <stable@kernel.org> Signed-off-by: Anfei Zhou <anfei.zhou@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | ARM: 6165/1: trap overflows on highmem pages from kmap_atomic when debuggingNicolas Pitre2010-06-081-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When CONFIG_DEBUG_HIGHMEM is used, the fixmap entry used for a highmem page by kmap_atomic() is always cleared by kunmap_atomic(). This helps find bad usages such as dereferences after the unmap, or overflow into the adjacent fixmap areas. But this debugging aid is completely bypassed when a kmap for the same page already exists as the kmap is reused instead. ON VIVT systems we have no choice but to reuse that kmap due to cache coherency issues, but on non VIVT systems we should always force the fixmap usage when debugging is active. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | ARM: 6152/1: ux500 make it possible to disable localtimersLinus Walleij2010-06-081-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Currently compilation of ux500 fails if you deselect the kernel feature for localtimers. Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | ARM: 6146/1: sa1111: Prevent deadlock in resume pathMarek Vašut2010-05-271-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch reorganises the sa1111_resume() function in a manner the spinlock happens after calling the sa1111_wake(). This fixes two bugs: 1) This function called sa1111_wake() which tried to claim the same spinlock the sa1111_resume() already claimed. This would result in certain deadlock. Original idea for this part: Russell King <rmk+kernel@arm.linux.org.uk> 2) The function didn't unlock the spinlock in case the chip didn't report correct ID. Original idea for this part: Julia Lawall <julia@diku.dk> Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | ARM: 6145/1: ux500 MTU clockrate correctionLinus Walleij2010-05-277-12/+167
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adjusts the clockrate for the MTU timer. On the different UX500 variants this rate is different. The platform can also have been set up at hardware initialization, bootloader or early init for different clock speeds. To have the clock framework available early so the timers can use them, the clock initialization for Nomadik and ux500 is moved to IRQ init time. A custom per-clock callback is added to handle special cases like this. This solves a user-visible bug: without this patch the current UX500 platforms will not be synchronized to wall-clock time and the platform will drift in time. Acked-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | ARM: 6144/1: TCM memory bug freeing bugLinus Walleij2010-05-271-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes a bug in mm/init.c when freeing the TCM compile memory, this was being referred to as a char * which is incorrect: this will dereference the pointer and feed in the value at the location instead of the address to it. Change it to a plain char and use &(char) to reference it. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Cc: <stable@kernel.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | ARM: VFP: Fix vfp_put_double() for d16-d31Russell King2010-05-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | vfp_put_double() takes the double value in r0,r1 not r1,r2. Reported-by: Tarun Kanti DebBarma <tarun.kanti@ti.com> Cc: <stable@kernel.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | msm: dma: add completion.h headerDaniel Walker2010-06-071-0/+1
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | At some point this was exposed (not sure how), linux-2.6/arch/arm/mach-msm/dma.c:92: error: field 'complete' has incomplete type linux-2.6/arch/arm/mach-msm/dma.c: In function 'dmov_exec_cmdptr_complete_func': linux-2.6/arch/arm/mach-msm/dma.c:108: error: implicit declaration of function 'complete' linux-2.6/arch/arm/mach-msm/dma.c: In function 'msm_dmov_exec_cmd': linux-2.6/arch/arm/mach-msm/dma.c:120: error: implicit declaration of function 'init_completion' linux-2.6/arch/arm/mach-msm/dma.c:123: error: implicit declaration of function 'wait_for_completion' and the fix is just to add the header. Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
* | Merge branch 'for-next' of ↵Linus Torvalds2010-05-304-3/+82
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (47 commits) mfd: Rename twl5031 sih modules mfd: Storage class for timberdale should be before const qualifier mfd: Remove unneeded and dangerous clearing of clientdata mfd: New AB8500 driver gpio: Fix inverted rdc321x gpio data out registers mfd: Change rdc321x resources flags to IORESOURCE_IO mfd: Move pcf50633 irq related functions to its own file. mfd: Use threaded irq for pcf50633 mfd: pcf50633-adc: Fix potential race in pcf50633_adc_sync_read mfd: Fix pcf50633 bitfield logic in interrupt handler gpio: rdc321x needs to select MFD_CORE mfd: Use menuconfig for quicker config editing ARM: AB3550 board configuration and irq for U300 mfd: AB3550 core driver mfd: AB3100 register access change to abx500 API mfd: Renamed ab3100.h to abx500.h gpio: Add TC35892 GPIO driver mfd: Add Toshiba's TC35892 MFD core mfd: Delay to mask tsc irq in max8925 mfd: Remove incorrect wm8350 kfree ...
| * | mfd: New AB8500 driverRabin Vincent2010-05-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a new driver to support the AB8500 Power Management chip, replacing the current AB4500. The new driver replaces the old one, instead of an incremental modification, because this is a substantial overhaul including: - Split of the driver into -core and -spi portions, to allow another interface layer to be added - Addition of interrupt support - Switch to MFD core API for handling subdevices - Simplification of the APIs to remove a redundant block parameter - Rename of the APIs and macros from ab4500_* to ab8500_* - Rename of the files from ab4500* to ab8500* - Change of the driver name from ab4500 to ab8500 Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * | ARM: AB3550 board configuration and irq for U300Mattias Wallin2010-05-282-0/+62
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the i2c board configuration needed for the Mixed Signal chip AB3550. It also adds the irq numbers needed for the irq_chip implementation. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * | mfd: Renamed ab3100.h to abx500.hLinus Walleij2010-05-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The goal here is to make way for a more general interface for the analog baseband chips ab3100 ab3550 ab550 and future chips. This patch have been divided into two parts since both changing name and content of a file is not recommended in git. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * | davinci: da850 TPS6507x touch screen driver board dataTodd Fischer2010-05-281-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The touch screen controller in the TPS6507x chip needs values that are dependent on the characteristics of the touch screen hardware being used in the board design. In addition, the board provides version information that is exposed via the kernel input sub-system. Signed-off-by: Todd Fischer <todd.fischer@ridgerun.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
OpenPOWER on IntegriCloud